c4

Revised:  August 09, 2005.



Revised:  October 04, 2005.



35a436
0319 |A| FSP/Node Redundancy Enablement

36a438
1838 |A| 8m 12x to three 4x IB Cable

42c444
2634 |A| 16X/48X(max) IDE DVD-ROM Drive
2634 |S| 16X/48X(max) IDE DVD-ROM Drive

49c451
2944 |A| 128-Port Asynchronous Controller, PCI bus
2944 |S| 128-Port Asynchronous Controller, PCI bus

68,469c470,471
3627 |S| IBM P76/P77 Color Monitor, Business Black, Captured
Cable
3279 |S| 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3627 |S| IBM P76/P77 Color Monitor, Business Black, Captured Cable

76a479
3642 |A| ThinkVision L191p Flat Panel Monitor

89c492
4959 |A| IBM Token-Ring PCI Adapter
4959 |S| IBM Token-Ring PCI Adapter

92c495
4962 |A| 10/100 Mbps Ethernet PCI Adapter II
4962 |S| 10/100 Mbps Ethernet PCI Adapter II

99c502
5710 |A| PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter
5710 |S| PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter

04a508
5736 |A| PCI-X DDR Dual Channel Ultra320 SCSI Adapter

98a603
7820 |A| GX Dual-port 12x IB HCA

31,632c636,637
8136 |A| Rack Mountable Remote Asynchronous Node 16-Port EIA-232
8137 |A| Enhanced Remote Asynchronous Node 16-Port EIA-232
8136 |S| Rack Mountable Remote Asynchronous Node 16-Port EIA-232
8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232

906,1908d1910

  • MISCELLANEOUS



    971a1974
  • (#5736) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter

    981a1985
  • (#7820) - GX Dual-port 12x IB HCA

    984a1989
  • (#1838) - 8m 12x to three 4x IB Cable

    037a2043
  • (#3279) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

    050a2057
  • (#3642) - ThinkVision L191p Flat Panel Monitor

    184a2192
  • (#0319) - FSP/Node Redundancy Enablement

    307a2316,2344

    (#0319) - FSP/Node Redundancy Enablement


    Indicates that dynamic, failover service processor (FSP) redundancy
    and processor node redundancy are required. A minimum of four #7818
    adapters must be installed in appropriate HSL/RIO adapter slots for32 way
    servers and above.


    • Attributes provided: Failover service processor (FSP) and node
      redundancy.
    • Attributes required: Two or more processor books with four or more
      #7818 adapters and firmware level SF235_xxx
    • For 9119-590: (#0319)

      • Minimum required: 0
      • Maximum allowed: 1 (Initial order maximum: 1)
      • OS level required: AIX 5L for POWER V5.2 with the 5200-04
        Recommended Maintenance package (APAR IY56722) or later, plus APAR
        IY60347; or AIX 5L V5.3 with APAR IY60349.

        Refer to the following URL for systems and features that operate with
        Linux:

        http://www.ibm.com/servers/eserver/pseries/
        hardware/factsfeatures.html
         


      • Initial Order/MES/Both/Supported: Both
      • CSU: No
      • Return parts MES: No

      Note: Requires a minimum 2 FC #7818 in each of two processor books.



    323a2361,2377

    (#1838) 8m 12x to three 4x IB Cable


    This 8.0 meter 12x to three 4x IB cable is utilized for InfiniBand
    applications.


    • Attributes provided: 8.0 meter 12x to three 4x IB cable
    • Attributes required: 12x IB port on HCA adapter, and three 4x switch
      ports
    • For 9119-590: (#1838)

      • Minimum required: 0
      • Maximum allowed: No max (Initial order maximum: No max )
      • OS level required: None
      • Initial Order/MES/Both/Supported: Both
      • CSU: No
      • Return parts MES: No



    442a2497

    (No Longer Available as of March 31, 2006)


    662a2718

    (No Longer Available as of March 31, 2006)


    143a3200,3242

    (#3279) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly


    The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides
    146.8 GB of storage capacity and supports the industry standard Ultra3
    SCSI interface speed of up to 320 MBps.

    Characteristics:


    • Form Factor: 3.5-inch, 1-inch (25 mm) high
    • Cable included: No
    • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
    • Attachment Industry Spec: SCSI U320
    • Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
    • Average Latency: 2 ms
    • Rotational Speed: 15,000 RPM
    • Maximum Data Transfer Rate:107 MBps

    Limitation: This disk drive requires attachment to a supported
    Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
    cable/backplane in order for the drive to run at 320 MBps. Also, any and
    all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
    or Ultra320 SCSI device(s) in order for this disk drive to run at 320
    MBps.


    • Attributes provided: 146.8 GB of disk storage mounted in a carrier.
    • Attributes required: One disk drive bay.
    • For 9119-590: (#3279)

      • Minimum required: 0
      • Maximum allowed: 128 (Initial order maximum: 128 )
      • OS level required: AIX 5L for POWER V5.2 with the 5200-04 Recommended
        Maintenance package (APAR IY56722) or later, plus APAR IY60347; or AIX 5L
        V5.3 with APAR IY60349.

        Refer to the following URL for systems and features that operate with
        Linux:

        http://www.ibm.com/servers/eserver/pseries/hardware/
        factsfeatures.html
         


      • Initial Order/MES/Both/Supported: Both
      • CSU: No
      • Return parts MES: No

      Note: Max. = 16 per I/O drawer.



    148c3247

  • 17-inch Flat Trinitron (R) CRT with a viewable image size of

  • 17-inch Flat Trinitron** CRT with a viewable image size of

    365a3465,3498

    (#3642) - ThinkVision L191p Flat Panel Monitor


    The ThinkVision L191p LCD flat-panel monitor has the following general
    characteristics:


    • Business black color
    • 19.0-inch LCD digital screen with a viewable image size of 483 mm
      (19.0 inches) measured diagonally, incorporating a 0.294mm pixel
      pitch/type for bright, high-definition images.
    • Maximum resolution of 1280 x 1024.
    • Tilt/swivel and height adjustable stand
    • Analog or digital connection
    • Dual input allows attachment to two systems concurrently.
    • Internal power
    • Depth: 237.0 mm (9.3 in.)
    • Height: 457.0 mm (18.0 in.)
    • Width: 408.0 mm (16.1 in.)
    • Weight: 7.1 kg (15.7 lbs.)
    • Contrast ratio: 1000:1 (typical)
    • Video inputs: 15-pin D / DVI-D
    • Two removable cables, one analog and one digital


    • Attributes provided: Color Flat-panel Monitor
    • Attributes required: Graphics Adapter
    • For 9119-590: (#3642)

      • Minimum required: 0
      • Maximum allowed: 16 (Initial order maximum: 16)
      • OS level required: None
      • Initial Order/MES/Both/Supported: Both
      • CSU: Yes
      • Return parts MES: No



    569a3703

    (No Longer Available as of March 31, 2006)


    662a3797

    (No Longer Available as of March 31, 2006)


    251a4387,4453

    (#5736) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter


    The PCI-X Dual Channel Ultra320 SCSI Adapter (#5736) is a 64-bit 3.3
    volt adapter and is an excellent solution for high-performance SCSI
    applications. The PCI-X DDR Dual Channel Ultra320 SCSI Adapter provides
    two SCSI channels (busses), each capable of running 320 MBps (max.).
    Each SCSI bus can either be internal (on systems that support internal
    SCSI device or backplane attachments) or external. Internally attached
    Ultra320 devices are designed to run at a data rate of up to 320 MB per
    second on systems that have internal backplanes that are capable of
    supporting Ultra320 speeds.

    In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
    second and also maintain a reasonable drive distance, the adapter
    utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
    utilize this 320 MB per second performance, all attaching devices should
    also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
    devices coexist on the same bus, each device will operate at its rated
    speed. For lower speed single-ended (SE) devices, the SCSI bus will
    switch to single-ended (SE) performance and interface to all devices on
    that SCSI bus at the lower SE bus data rate of the device.

    Two VHDCI 68-pin connectors are mounted on the adapter's end bracket
    allowing attachment of various LVD and SE external subsystems. A .3
    meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be
    used with older external SE devices or subsystems to allow connection to
    the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter.

    The two external ports provide connectivity to numerous other SCSI
    external subsystems. Check the external subsystem sales/Web pages for
    verification of connectivity support with this adapter.

    The PCI-X Dual Channel Ultra320 SCSI Adapter (#5736) is a native boot
    adapter with AIX 5L for POWER Version 5.2 with the 5200-07 Recommended
    Maintenance package (APAR IY67914) or AIX 5L for POWER Version 5.3 with
    the 5300-03 Recommended Maintenance package (APAR IY71011) or later
    software in a supported pSeries or RS/6000 systems. The adapter also
    supports target mode.

    Limitations:


    • Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports
      that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
      attached disk drives will run at a maximum SCSI bus data rate specified
      by that supporting system disk backplane.
    • To obtain microcode update go to the following Web page URL:

      http://techsupport.services.ibm.com/server/mdownload/



    • Attributes provided: Attachment of internal SCSI devices (on systems
      that support an internal SCSI device or backplane attachment with this
      adapter) and external SCSI devices
    • Attributes required: One available 3.3 volt PCI or PCI-X slot or
      PCI-X 2.0 DDR slot.
    • For 9119-590: (#5736)

      • Minimum required: 0
      • Maximum allowed: 160 (Initial order maximum: 160)
      • OS level required: AIX 5.2 or AIX 5.3, or later. SUSE LINUX
        Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS for
        POWER Version 4, or later. Linux - Refer to the following URL for
        systems and features that operate with Linux:
        http://www.ibm.com/servers/eserver/pseries/
        hardware/factsfeatures.html
         


      • Initial Order/MES/Both/Supported: Both
      • CSU: No
      • Return parts MES: No



    942a6145,6161

    (#7820) GX Dual-port 12x IB HCA


    The #7820, GX Dual-port 12x InfiniBand Host Channel Adapter, provides
    two 12x IB connections for InfiniBand applications.


    • Attributes provided: 2 ports of 12x IB
    • Attributes required: Available adapter position
    • For 9119-590: (#7820)

      • Minimum required: 0
      • Maximum allowed: 4 (Initial order maximum: 4 )
      • OS level required: AIX 5.3, or later. SUSE LINUX Enterprise Server
        9 for POWER, or later.
      • Initial Order/MES/Both/Supported: Both
      • CSU: No
      • Return parts MES: No



    715a6935

    (No Longer Available as of March 31, 2006)


    788a7009

    (No Longer Available as of March 31, 2006)