Note: (1) The above maximum temperature of 32 degrees C (90 degrees F) is Note: (1) The above maximum temperatures of 32 degrees C (90 degrees F), Note: Two SCSI cables are required when ordered with Media Drawer #5795 (No Longer Available as of June 24, 2005) (No Longer Available as of June 24, 2005)
linearly derated above 1,295 m (4,250 ft) as follows:
(10,000 ft).
degrees F).
with rack mounted Media Drawer (#5795)
28 degrees C (82 degrees F) are linearly derated above 1,295 m
(4,250 ft) as follows:
3,048 m (10,000 ft). The maximum temperature at 3,048 m (10,000
ft) is 24 degrees C (75 degrees F).
2,591 m (8,500 ft). The maximum temperature at 2,591 m (8,500
ft) is 24 degrees C (75 degrees F).
420,1424c1427,1441
7210-025, or 7210-030. These devices attach via a PCI SCSI adapter in
one of the system I/O drawers.
of the system I/O drawers. An Ethernet adapter is recommended.
media drawer #5795, 7212-102, 7210-025, or 7210-030. The Media
Drawer #5795 is mounted in the 13U location of the CEC Rack;
whereas, the 7212-102, 7210-025, and 7210-030 devices attach via
a PCI SCSI adapter in one of the system I/O drawers.
media drawer for use with the p5 590 (9119-590). This media
drawer will be located in the 13U position of the CEC Rack. The
media drawer displaces any I/O drawer or battery backup feature
components which would be located in the 13U through 16U location
of the primary system rack. The Media Drawer (#5795) provides a
fixed configuration which must be ordered with three media
devices and all required SCSI and power attachment cabling.
one of the system I/O drawers. An Ethernet connection is recommended.
181d2197
708,3713c3724,3729
devices. The media drawer is divided into front and rear sections. Each
section of the media drawer is powered separately from the first system
I/O drawer, either a 5791 or 5794, and must be cabled to separate ports
of two SCSI PCI adapters. The front section contains two media bays and
the rear section contains one media bay. The device in the rear is only
accessible from the rear of the system.
devices. The media drawer is divided into front and rear sections.
Each section of the media drawer is powered separately from the
first system I/O drawer, either a 5791 or 5794, and must be cabled
to two SCSI PCI adapters. The front section contains two media bays
and the rear section contains one media bay. The device in the
rear is only accessible from the rear of the system.
014a4031
381a4399