This feature allows specifying placement of I/O components The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300 Characteristics: Limitation: This disk drive requires attachment to a supported (No Longer Available as of May 12, 2005) The Dual Channel SCSI RAID Enablement Card (#5726) is a bootable Limitation: Even though the supporting integrated adapter with the Note: Each system drawer can have a maximum of one feature #5709 or This feature allows the customer to move disks from the system to This power cord goes from the system and/or peripheral features to This power cord goes from the system and/or peripheral features to (No Longer Available as of May 12, 2005) Provides 8192MB of DDR2 system memory with 4 2048MB DIMMs.
based on customer specific requirments. The component placement
will be configured by IBM manufacturing prior to shipment.
Feature 0453 requests that IBM deliver the system to the
customer according to the slot in drawer hardware placement
defined within the LPAR Verification Tool (LVT). It eliminates
the need to have these parts relocated at the customer location,
as may happen if the order is placed without this feature
code. It requires the account team to submit the LVT output to
IBM manufacturing via a web site. It also requires the account
team to assure that the LVT information submitted reflects the
actual order placed.
128a3176,3214
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
Linux- Refer to the following Web Site for Linux information:
http://www.ibm.com/servers/eservers/pseries/hardware/
factsfeatures.html
489a4576
744a4832,4889
(#5726) - Dual Channel SCSI RAID Enablement Card
high performance SCSI RAID Enablement feature providing RAID 0,5,
or 10 capability to select pSeries systems with the appropriate
supporting integrated SCSI adapter and internal multiple disk
drives or packs of drives.
To increase the data writing performance, a 16 MByte non-volitile
fast-write cache is provided as a resident part of this feature.
The 16 MByte fast-write cache can provide an improvement in data
throughput and response time during certain sequence write
operations compared to SCSI RAID adapters without the fast-write
cache. The response time and data transfer improvement will
vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array are required to
be formatted to 522 byte sectors. 522 byte sectors provide
additional CRC error checking for improved data integrety. A
menu option is provided in the AIX supporting software which
will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array,
a similar menu option is also provided to re-format them back to
512 byte sectors. Note: Some disk drives require that their
microcode be updated to the latest level before being formatted to
522 Byte Sectors. Also, there are some disk drives which do not
support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk
Array Manager will inform the user of these known situations when
they exist. For disk microcode updates, go to the following web
page URL:
Dual Channel SCSI RAID Enablement Card has ports that run at ultra320
SCSI speeds (up to 320 MBytes/s), the internally attached disk
drives will run at a maximum SCSI bus data rate specified by
that supporting system disk backplane.
an array.
to the following URL for systems and features that operate with Linux:
http://www.ibm.com/servers/eserver/pseries/
hardware/factsfeatures.html
#5726.
193c5338
602a5748,5803
(#6598) - Disk Slot Fillers (Quantity 4)
another system or an IO drawer and to place a blank disk filler in the
empty disk slot. Systems shipped from manufacturing have blank filler
in the empty disk slots.
(#6651) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75
a wall-type outlet. Plug type #75 (KETI). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types.
The following countries/regions use the #6651 power cord to power
the system and/or peripheral features requiring a power cord: Taiwan
(#6659) Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76
a wall-type outlet. Plug type #76 (KETI). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types.
The following countries/regions use the #6659 power cord to power
the system and/or peripheral features requiring a power cord: Taiwan
701c5902,5903
system in an IBM 19-inch rack.
system in an IBM 19-inch rack. Because the rail depth is adjustable,
this feature can also be installed in OEM racks from non-IBM vendors.
717a5920
199a6403,6422
(#7894) - 8192MB (4x2048MB) DIMMs, 276-pin, 533MHz DDR2 SDRAM
to the following URL for systems and features that operate with Linux:
http://www.ibm.com/servers/eserver/pseries/hardware/
factsfeatures.html
014a8238,8253
Terms of use
[
Help
]
026,8027d8264
|
Terms of use
030c8267
Contact
Contact