Software or Licensed Machine Code Requirements Each 7315-CR2 Hardware Management Console must include either OR Refer to Software Announcement 202-273, dated October 8, 2002, for Licensed machine code provides GUI interface for LPAR and dynamic Licensed machine code provides GUI interface for LPAR and dynamic (For IBM US, No Longer Available as of February 27, 2004) (No Longer Available as of February 27, 2004) The IBM ThinkVision C170 color monitor has the following general Note: Not marketed in Japan. The Cable Chain Technology Cable enables multiple Hardware Management The Cable Chain Technology Cable enables multiple Hardware Management This feature provides a six meter long Ethernet cable for attachment This feature provides a fifteen meter long Ethernet cable for This feature provides a USB attached Brazilian Portuguese #275 Note: Requires feature #0961 Hardware Management Console for POWER5 This feature provides a USB attached Dutch #143 keyboard. Note: Requires feature #0961 Hardware Management Console for POWER5 This feature provides a USB attached Hungarian #208 keyboard. Note: Requires feature #0961 Hardware Management Console for POWER5 This feature provides a USB attached Slovakian #245 keyboard.
Software or Licensed Machine Code as follows:
48,458c477,492
HMC Recovery Software for pSeries (5639-N47) V2.3, or later, software.
This software supports dynamic LPAR and Capacity Upgrade on Demand (CUoD)
functions. To implement dynamic LPAR or CUoD function on p670 (7040-671)
or p690 (7040-681) servers, AIX 5L V5.2, or later, and systems microcode
(machine code) at the 10/2002 level, or later, are required.
every 7315-CR2 system. Additionally, a 1-year (5639-SB1 and 5639-ST1) or
3-year (5639-SB3 and 5639-ST3) Software Maintenance contract for HMC
Recovery Software must be ordered with the initial 7315-CR2 system order.
(5639-N47) V2.3, or later, with a 1-year (5639-SB1 and 5639-ST1)
or 3-year (5639-SB3 and 5639-ST3) Software Maintenance contract
for Hardware Management Console Recovery Software
(Feature #0960)
before May 28, 2004 require the Hardware Management Console Recover
Software for pSeries (5639-N47) on the initial order. The Hardware
Management Console for POWER4 Licensed Machine Code feature #0960
may be ordered via MES for these Hardware Management Consoles after
installation if desired.
or after May 28, 2004 must be ordered with feature #0960 Hardware
Management Console for POWER4 Licensed Machine Code.
60,461d493
Hardware Management Console Recovery Software for pSeries.
32a665,673
pin D-shell)
Unit
Unit
46,648d686
pin D-shell)
52a691
64,666c703,706
#129
German/Austrian, #129
#166
69,671c709,720
#445
Brazilian/Portuguese, #275
#171
Canadian, #445
77a727,730
Code
Code
94a748,788
(#0960) Hardware Management Console for POWER4 Licensed Machine Code
Capacity Upgrade on Demand (CUoD) for POWER4/POWER4+ Serial
connections. Functions provided include:
and I/O resources allocated to an individual partition.
partition or controlled system
(#0961) Hardware Management Console for POWER5 Licensed Machine Code
Capacity Upgrade on Demand (CUoD) for POWER5 Ethernet connections.
73c867
96a891,920
(#3631) IBM ThinkVision C170 17-inch Color Monitor
characteristics:
406.4 mm (16 inches), incorporating a 0.25 mm diagonal dot pitch and a
0.22 mm horizontal dot pitch
with low distortion and low glare
Hz, frequency of 85 kHz with a maximum addressability of 1600 x 1200
pels
18a1043,1080
(#4271) Cable Chain Technology Cable - C2T, 0.26 Meter
Consoles within a rack enclosure to share keyboard, mouse, and
monitor.
Management Console Chaining
(#4272) Cable Chain Technology Cable - C2T, 2 Meter
Consoles within a rack enclosure to share keyboard, mouse, and monitor.
The 2 meter cable provides added flexibility to connect two Hardware
Manangement Consoles where the standard chaining cable is not long
enough.
Management Console Chaining
294a1457,1488
(#7801) Ethernet Cable, 6M, Hardware Management Console to System Unit
of a Hardware Management Console to the system unit.
(#7802) Ethernet Cable, 15M, Hardware Management Console to System Unit
attachment of a Hardware Management Console to the system unit.
297,1299c1491,1494
(Hardware Management Console) and the host system. It provides a 9-pin
female connector for HMC connection and a 9-pin male connection to attach
to the HMC port on the host system.
(Hardware Management Console) and the host system. It provides a
9-pin female connector for HMC connection and a 9-pin male
connection to attach to the HMC port on the host system. A 9-pin to
25-pin adapter is also provided.
315,1317c1510,1513
(Hardware Management Console) and the host system. It provides a 9-pin
female connector for HMC connection and a 9-pin male connection to attach
to the HMC port on the host system.
(Hardware Management Console) and the host system. It provides a
9-pin female connector for HMC connection and a 9-pin male
connection to attach to the HMC port on the host system. A 9-pin to
25-pin adapter is also provided.
633a1830,1915
(#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275
keyboard.
Licensed Machine Code.
(#8817) Quiet Touch Keyboard - USB, Business Black, Dutch, #143
Licensed Machine Code.
(#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
Licensed Machine Code.
(#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245