COLOR: A specify code is not required.
VOLTAGE: A specify code is not required. Voltage/power will be
determined by the plant based on the country code of the order. The
specify codes listed below must be used when an alternative to the plant
country default is required. A specify code is not required.
LANGUAGE: A specify code for language is required and will be
provided by the configurator based on the country code of the order. The
specify codes listed below must be used when an alternative to the ELINK
configurator default is required.
58a657,660
SPECIFY CODES
- (#8453) - Customer Specified Placement , Initial Order Only
59a762
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
44a848,864
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7311-D20: (#0986)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
927a1948,1987
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage
Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7311-D20: (#3578)
- Minimum required: 0
- Maximum allowed: 12 (Initial order maximum: 12 )
- OS level required: AIX V4.3 or higher PSSP levels 3.1, 3.2 and higher
Linux- Refer to the following Web Site for Linux information:
http://www.ibm.com/servers/eservers/pseries/hardware/
factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
578c3638
Initial Order/MES/Both/Supported: Both
Initial Order/MES/Both/Supported: MES
915a3976,4005
(#8453) - Customer Specified Placement , Initial Order Only
This offering allows the customer to order a new initial p5-570 with
the 7311-D11 or 7311-D20 as part of the system and have the ability to
place the hardware within the CEC and the 7311 I/O drawers. The customer
can designate the slot in drawer placement through the process described
in the following Web site:
- http://www-1.ibm.com/servers/eserver/power/csp/
- Attributes provided: Designates the IBM manufacturing
will ship the system to the customer with the hardware placed
within the 7311-D11 and 7311-D20 drawer to the customers specifications.
- Attributes required: The 7311 order has to be part of a p5-570 system
order that has requested Customer Specified Placement (0453 FC). The
8453 FC is not available on stand alone orders for the 7311.
See the following website for process to follow:
- http://www-1.ibm.com/servers/eserver/power/csp/
- For 7311-D20: (#8453)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: NA
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
090,5091c5180,5181
097c5187
109c5199
119c5209
127c5217
140a5231