COLOR: A specify code is not required.
VOLTAGE: A specify code for voltage/power is not required and will be
provided by the configurator based on the country code of the order.
Specify codes must be used when an alternative to the ELINK configurator
default is required.
LANGUAGE: A specify code is not required. Language will be provided
by the plant based on the country code of the order. Specify codes must
be used when an alternative to the ELINK configurator default is
required.
31a746
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
10a826,840
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7040-61D: (#0986)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
996a2027,2066
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage
Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7040-61D: (#3578)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16 )
- OS level required: AIX V4.3 or higher PSSP levels 3.1, 3.2 and higher
Linux- Refer to the following Web Site for Linux information:
http://www.ibm.com/servers/eservers/pseries/hardware/
factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
400c4470
Initial Order/MES/Both/Supported: Both
Initial Order/MES/Both/Supported: MES
357,5358c5427,5428
364c5434
376c5446
386c5456
394c5464
408a5479