(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI U320

Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)

Average Latency: 2.99 ms

Rotational Speed: 10,000 RPM

Maximum Data Transfer Rate: 88 MBps

Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.

Attributes provided: 300 GB of disk storage mounted in a carrier.

Attributes required: One disk drive bay.

For 7039-651: (#3578)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2 )

OS level required: AIX V4.3 or higher PSSP levels 3.1, 3.2 and higher
Linux- Refer to the following Web Site for Linux information:

http://www.ibm.com/servers/eservers/pseries/hardware/

 factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

100c5142

Initial Order/MES/Both/Supported: Both

Initial Order/MES/Both/Supported: MES

987a6030,6045

[
Help
]

999,6000d6056
|
Terms of use

003c6059
Contact
Contact