VOLTAGE: A specify code is not required. Voltage/power will be
determined by the plant based on the country code of the order. The
specify codes listed must be used when an alternative to the plant
country default is Required.
LANGUAGE: A specify code is not required. Language will be
determined by the plant based on the country code of the order. The
specify codes listed must be used when an alternative to the plant
country default is required.
133a2106
(#0986) - CCS Customer Service Specify (US)
136a2110
(#7305) - AAP Software Pre-Install Indicator
197,2198c2171,2172
339a2314
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
458a2434,2450
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#0986)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
442a3435,3473
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3578)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8 )
- OS level required: AIX V4.3 or higher PSSP levels 3.1, 3.2 and higher
Linux- Refer to the following Web Site for Linux information:
http://www.ibm.com/servers/eservers/pseries/hardware/
factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
322c5353
Initial Order/MES/Both/Supported: Both
Initial Order/MES/Both/Supported: MES
464a5496,5510
(#7305) AAP Software Pre-Install Indicator
Software pre-install indicator for Authorized Assemblers.
- Attributes provided: Software Preinstall
- Attributes required: Authorized Assembler Order
- For 7029-6C3: (#7305)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
459,7460c7505,7506
466c7512
478c7524
488c7534
496c7542
510a7557