c4

Revised: July 12, 2005.

Revised: August 09, 2005.

07c607,6396
- - - - -|-|- - - - BUS CONVERTER - - - - - - - -

No newline at end of file
- - - - -|-|- - - - BUS CONVERTER - - - - - - - - - -
2108-G07 |X| IBM Storage Area Network Data Gateway Model G07
- - - - -|-|- - - - ROUTER- - - - - - - - - - - - - -
2108-R03 |X| IBM Storage Area Network Data Gateway Model R03
| |
-----------+--------SCSI DEVICES---------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3995-C60 |X| IBM Optical Library Dataserver
3995-C62 |X| IBM Optical Library Dataserver
3995-C64 |X| IBM Optical Library Dataserver
3995-C66 |X| IBM Optical Library Dataserver
3995-C68 |X| IBM Optical Library Dataserver
7209-002 |X| IBM Optical Disk Drive Model 002
7209-003 |X| IBM Multifunction Optical Disk Drive Model 003
7210-005 |X| IBM External CD-ROM Drive Model 005
7210-010 |X| IBM External CD-ROM Drive Model 010
7210-015 |X| IBM CR-ROM Model 015
7210-020 |X| IBM CR-ROM Model 020
7210-025 |X| 4.7GB DVDRAM Drive
7212-102 |X| Storage Device Enclosure
| |
-----------+--------TAPE-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3490-F00 |X| IBM Magnetic Tape Subsystem Model F00
3490-F01 |X| IBM Magnetic Tape Subsystem Model F01
3490-F11 |X| IBM Magnetic Tape Subsystem Model F11
3494-B10 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B10
3494-B18 |X| IBM Magstar Virtual Tape Server Model B18
3494-B20 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B20
3494-D12 |X| IBM Magstar Tape Library Model D12
3494-L12 |X| IBM Magstar Tape Library Model L12
3570-B00 |X| IBM Magstar MP Tape Subsystem Model B00
3570-B01 |X| IBM Magstar MP Tape Subsystem Model B01
3570-B02 |X| IBM Magstar MP Tape Subsystem Model B02
3570-B11 |X| IBM Magstar MP Tape Subsystem Model B11
3570-B12 |X| IBM Magstar MP Tape Subsystem Model B12
3570-B1A |X| IBM Magstar MP Tape Drive Model B1A
3570-C00 |X| IBM Magstar MP Tape Drive Model C00
3570-C01 |X| IBM Magstar MP Tape Drive Model C01
3570-C02 |X| IBM Magstar MP Tape Drive Model C02
3570-C11 |X| IBM Magstar MP Tape Drive Model C11
3570-C12 |X| IBM Magstar MP Tape Drive Model C12
3575-L06 |X| IBM Magstar MP Tape Library Dataserver Model L06
3575-L12 |X| IBM Magstar MP Tape Library Dataserver Model L12
3575-L18 |X| IBM Magstar MP Tape Library Dataserver Model L18
3575-L24 |X| IBM Magstar MP Tape Library Dataserver Model L24
3575-L32 |X| IBM Magstar MP Tape Library Dataserver Model L32
3580-H11 |X| Linear Tape Open (LTO) Bridge Box (HVD)
3580-H23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3580-L11 |X| Linear Tape Open (LTO) Bridge Box (LVD)
3580-L23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3581-H17 |X| Linear Tape Open (LTO) Autoloader (HVD)
3581-L17 |X| Linear Tape Open (LTO) Autoloader (LVD)
3581-H23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3581-L23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3583-L18 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L36 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L72 |X| Linear Tape Open (LTO) Tape Library - Scalable
3584-D22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D22 Expansion Frame
3584-D32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Base
| | Frame
3584-D42 |X| IBM UltraScalable Tape Library Model D42
3584-D52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D52 Expansion Frame
3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1
3584-L22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L22 Base Frame
3584-L32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library -
| | Expansion Frame
3584-L52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L52 Base Frame
3590-B11 |X| IBM Magstar Tape Subsystem Model B11
3590-B1A |X| IBM Magstar Tape Subsystem Model B1A
3590-C12 |X| IBM Magstar Silo Compatible Frame Model C1A
3590-E11 |X| Magstar Tape Subsystem
3590-E1A |X| Magstar Tape Subsystem
3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11
3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A
7205-311 |X| IBM 35 GB External Digital Linear Tape Drive Model 311
7206-005 |X| IBM External 4MM Tape Drive Model 005
7206-110 |X| IBM 12GB External 4MM DDS-3 Tape Drive Model 110
7206-220 |X| IBM 20GB External 4MM DDS-4 Tape Drive Model 220
7206-VX2 |X| IBM 7206 Model VX2 External Tape Drive
7207-011 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive
| | Model 011
7207-012 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive
| | Model 012
7207-122 |X| IBM 4GB External SLR5 QIC Tape Drive Model 122
7207-315 |X| IBM RS/6000 13GB 1/4-inch Tape Drive Model 315
7208-011 |X| IBM External 8MM Tape Drive Model 011
7208-341 |X| IBM 20GB External 8MM Tape Drive Model 341
7208-345 |X| IBM 7208 Model 345 60GB External 8MM Tape Drive
7331-205 |X| IBM 8MM Tape Library Model 205
7331-305 |X| IBM 8MM Tape Library Model 305
7332-005 |X| IBM 4MM DDS-2 Tape Autoloader Model 005
7332-110 |X| IBM 4MM DDS-3 Tape Cartridge Autoloader Model 110
7332-220 |X| IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220

MT-MOD | | DESCRIPTION
---------|-|-----------------------------------------
7334-410 |X| IBM 7334 Model 410 8MM Tape Library (MAM2 4x30)
7336-205 |X| IBM 4MM Tape Library Model 205
7337-305 |X| IBM Digital Linear Tape Library Model 305
7337-306 |X| IBM Digital Linear Tape Library Model 306
7337-360 |X| IBM 7337 Digital Linear Tape Library Model 360
9348-012 |X| IBM Magnetic Tape Unit Model 012
| |
-----------+--------EXPANSION CABINETS---------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2032-C36 |X| McDATA Model 0C3 FC-512 Cabinet for McDATA Directors
| | and Fabric Switch
2042-C40 |X| Inrange 40U Cabinet
7014-S00 |X| 1.6 Meter System Rack - 32U
7014-T00 |X| 1.8 Meter System Rack - 36U
7014-T42 |X| 2.0 Meter System Rack - 42U

The following feature availability matrix for MT 7028 uses the letter
"A" to indicate features that are available and orderable on the
specified models. "S" indicates a feature that is supported on the new
model during a model conversion; these features will work on the new
model, but additional quantities of these features cannot be ordered on
the new model; they can only be removed. "N" indicates that the feature
is not supported on the new model and must be removed during the model
conversion. As additional features are announced, supported, or
withdrawn, this list will be updated. Please check with your Marketing
Representative for additional information.

        |6| A = AVAILABLE  S = SUPPORTED

         |E| N = NOT SUPPORTED, MUST BE REMOVED

         |1|

 FEAT/PN | |        DESCRIPTION

 --------|-|-----------------------------------------

 0001    |A| After-market (MES) Order Indicator

 0986    |A| CCS Customer Service Specify (US)

 1736    |S| Expedited Delivery Service Indicator

 2114    |A| PCI SCSI Adapter 16-Bit Differential External Y Cable

 2115    |S| PCI SCSI Adapter To 2-Port, 16-Bit SE External Device

         | |      Cable

 2116    |S| PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext

         | |      Device Cable

 2118    |A| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M

 2424    |S| 0.6M 16-bit SCSI-2 System to System Cable

 2425    |A| 2.5M 16-bit SCSI-2 System to System Cable

 2456    |A| LC-SC 50 Micron Fibre Converter Cable

 2459    |A| LC-SC 62.5-Micron Fiber Converter Cable

 2498    |S| PCI 4-Channel Ultra3 SCSI RAID Adapter

 2623    |S| 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)

 2633    |S| IDE CD-ROM Drive (Black bezel)

 2634    |A| 16X/48X(max) IDE DVD-ROM Drive

 2709    |S| ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable

 2710    |S| ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable

 2732    |S| IBM Short-wave Serial HIPPI PCI Adapter for RS/6000

 2733    |S| IBM Long-wave Serial HIPPI PCI Adapter for RS/6000

 2751    |S| S/390 ESCON Channel PCI Adapter

 2848    |S| POWER GXT135P Graphics Accelerator

 2849    |A| POWER GXT135P Graphics Accelerator with Digital Support

 2861    |A| ARTIC960Hx 4-Port EIA-232 Cable

 2863    |A| ARTIC960Hx 4-Port X.21 Cable

 2864    |A| ARTIC960Hx 4-Port V.35 (DTE) Cable

 2871    |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable

 2872    |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable

 2873    |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port

         | |       Cable

 2874    |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M

         | |      Extension Cable

 2875    |S| IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded,

         | |      1.8M 4-Port Cable

 2877    |A| IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable

 2934    |A| Asynchronous Terminal/Printer Cable EIA-232

 2936    |A| Asynchronous Cable EIA-232/V.24

 2943    |A| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus

 2944    |A| 128-Port Asynchronous Controller, PCI bus

 2946    |S| Turboways 622 Mbps PCI MMF ATM Adapter

 2947    |A| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter

 2951    |S| Cable, V.24 / EIA-232

 2952    |S| Cable, V.35

 2953    |S| Cable, V.36 / EIA-499

 2954    |S| Cable, X.21

 2962    |S| 2-Port Multiprotocol PCI Adapter

 2969    |S| Gigabit Ethernet - SX PCI Adapter

 2975    |S| 10/100/1000 Base-T Ethernet PCI Adapter

 3102    |S| 18.2 GB 10,000 RPM Ultra SCSI Disk Drive

 3118    |S| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive

 3119    |S| 36.4GB 10,000 RPM Ultra SCSI Disk Drive

 3124    |A| Serial to Serial Port Cable for Drawer/Drawer

 3125    |A| Serial to Serial Port Cable for Rack/Rack

 3263    |S| 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

 3264    |S| 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

 3265    |S| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

 3276    |S| 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

 3280    |S| 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly

 3281    |S| 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly

 3627    |S| IBM P76/P77 Color Monitor, Business Black, Captured Cable

 3628    |S| IBM P260/P275 Color Monitor, Business Black, and Cable

 3635    |S| T210 Flat-Panel Monitor

 3636    |A| L200P Flat Panel Monitor

 3637    |A| IBM T541H/L150p 15" TFT Color Monitors, Business Black,

         | | Captured Cable

 3638    |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable

 3639    |S| IBM ThinkVision L170p Flat Panel Monitor

 3640    |A| IBM ThinkVision L171p Flat Panel Monitor

 3752    |A| Service Package

 3925    |A| Serial Port Converter Cable, 9-Pin to 25-Pin

 3926    |A| Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M

 4120    |S| 512MB (2x256MB) DIMMs, 200-pin 10NS SDRAM

 4121    |A| 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM

 4242    | | 6 Foot Extender Cable for Displays (15 pin D-shell to 15

         | |      pin D-shell)

 4246    |S| IDE 2-Drop Connector Cable

 4247    |S| SCSI 2-Drop Cable: Integrated SCSI to SCSI Backplane

         | |      and Bolt-in Disk

 4248    |S| SCSI Connector Cable and Repeater Card

 4249    |S| 3-Drop Cable: Backplane to Media Bays/Bolt-in Disk

 4258    |S| SCSI Cable, PCI Adapter to Hot-Swap Disks

 4259    |S| 3-Drop Cable: Integrated SCSI to Media

         | |      Bays/Bolt-in Disk

 4353    |S| H-100 Bus 8-position Cable

 4953    |S| IBM 64bit/66MHz PCI ATM 155 UTP Adapter

 4957    |A| IBM 64bit/66MHz PCI ATM 155 MMF Adapter

 4959    |A| IBM Token-Ring PCI Adapter

 4960    |A| IBM e-business Cryptographic Accelerator

 4961    |A| IBM Universal 4-Port 10/100 Ethernet Adapter

 4962    |A| 10/100 Mbps Ethernet PCI Adapter II

 4963    |N| PCI Cryptographic Coprocessor (FIPS-4)

 4964    |A| PCI Cryptographic Coprocessor

 5001    |A| Customer Service Specify

 5005    |A| Software Preinstall

 5300    |S| 1-Way 375MHz POWER3-II Processor Card

 5309    |S| 1-way 450MHz POWER3-II Processor Card

 5322    |S| 1-Way 333MHz POWER3-II Processor Card

 5700    |A| IBM Gigabit Ethernet-SX PCI-X Adapter

 5701    |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

 5703    |A| PCI-X Dual Channel Ultra320 SCSI RAID Adapter

 5706    |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter

 5707    |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter

 5712    |A| PCI-X Dual Channel Ultra320 SCSI Adapter

 6120    |A| IBM 80/160 GB Internal Tape Drive with VXA Technology

 6134    |N| 60/150 GB 16-bit 8mm Internal Tape Drive

 6156    |S| 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)

 6158    |A| 20/40GB 4mm Internal Tape Drive

 6166    |S| Acoustic Package for Deskside/Desktop Systems

 6203    |S| PCI Dual Channel Ultra3 SCSI Adapter

 6204    |S| PCI Universal Differential Ultra SCSI Adapter

 6206    |S| PCI Single-Ended Ultra SCSI Adapter

 6228    |S| Gigabit Fibre Channel Adapter for 64-bit PCI Bus

 6230    |S| Advanced SerialRAID Plus Adapter

 6231    |S| 128 MByte DRAM Option Card

 6235    |S| 32 MByte Fast-Write Cache Option Card

 6239    |S| 2 Gigabit Fibre Channel PCI-X Adapter

 6275    |S| Power Supply, 250 Watt AC, Hot-swap, Redundant

 6277    |S| Power Supply, 250 Watt AC, Hot-swap, Base and Redundant

 6310    |S| IBM ARTIC960RxD Quad Digital Trunk PCI Adapter

 6566    |S| Mounting Hardware for Disk in Media Bay

 6567    |S| Ultra3 SCSI Backplane for Hot-swap Disks

 7305    |A| AAP Software Pre-Install Indicator

 7779    |A| OEM Publications for IBM Logo Product

 8091    |S| 1-way 450MHz POWER3-II Processor Card, Express

         | |      Configurations, Factory Only

 8092    |S| 1-way 450MHz POWER3-II Processor Card, Express

         | |      Configurations, Factory Only

 8093    |S| 1024MB (2x512MB) DIMMs, Express Configurations,

         | |      Factory Only

 8094    |S| 1024MB (2x512MB) DIMMs, Express Configurations,

         | |      Factory Only

 8095    |S| 1024MB (2x512MB) DIMMs, Express Configurations,

         | |      Factory Only

 8096    |S| Express Configuration -- pSeries 610 (100C/100E)

 8097    |S| Express Configuration -- pSeries 610 (200C/200E)

 8098    |S| Express Configuration -- pSeries 610 (250C/250E)

 8099    |S| Express Configuration -- pSeries 610 (125C/125E) RAID

         | |      Applications

 8131    |A| 128-Port Asynchronous Controller Cable, 4.5 Meter

 8132    |A| 128-Port Asynchronous Controller Cable, 23cm (9-Inch)

 8133    |A| RJ-45 to DB-25 Converter Cable

 8136    |A| Rack Mountable Remote Asynchronous Node 16-Port EIA-232

 8137    |A| Enhanced Remote Asynchronous Node 16-Port EIA-232

 8700    |A| Quiet Touch Keyboard - Business Black, US English, #103P

 8701    |A| Quiet Touch Keyboard - Business Black, French, #189

 8702    |A| Quiet Touch Keyboard - Business Black, Italian, #142

 8703    |A| Quiet Touch Keyboard - Business Black, German/Austrian, #129

 8704    |A| Quiet Touch Keyboard - Business Black, UK English, #166

 8705    |A| Quiet Touch Keyboard - Business Black, Spanish, #172

 8706    |A| Quiet Touch Keyboard - Business Black, Japanese, #194

 8707    |A| Quiet Touch Keyboard - Business Black, Brazilian

         | |      Portuguese, #275

 8708    |A| Quiet Touch Keyboard - Business Black, Canadian French, #058

 8709    |S| Quiet Touch Keyboard - Business Black, Belgian/French, #120

 8710    |A| Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,

         | |      #120

 8711    |A| Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153

 8712    |A| Quiet Touch Keyboard - Business Black, Danish, #159

 8713    |A| Quiet Touch Keyboard - Business Black, Bulgarian, #442

 8714    |A| Quiet Touch Keyboard - Business Black,

         | |      Swiss,French/German, #150f/g

 8716    |A| Quiet Touch Keyboard - Business Black, Norwegian, #155

 8717    |S| Quiet Touch Keyboard - Business Black, Dutch, #143

 8718    |A| Quiet Touch Keyboard - Business Black, Portuguese, #163

 8719    |A| Quiet Touch Keyboard - Business Black, Greek, #319

 8720    |A| Quiet Touch Keyboard - Business Black, Hebrew, #212

 8721    |A| Quiet Touch Keyboard - Business Black, Hungarian, #208

 8722    |S| Quiet Touch Keyboard - Business Black, Icelandic, #197

 8723    |A| Quiet Touch Keyboard - Business Black, Polish, #214

 8724    |S| Quiet Touch Keyboard - Business Black, Romanian, #446

 8725    |A| Quiet Touch Keyboard - Business Black, Slovakian, #245

 8726    |A| Quiet Touch Keyboard - Business Black, Czech, #243

 8727    |A| Quiet Touch Keyboard - Business Black, Turkish, #179

 8728    |S| Quiet Touch Keyboard - Business Black, Turkish, #440

 8729    |A| Quiet Touch Keyboard - Business Black, LA Spanish, #171

 8730    |A| Quiet Touch Keyboard - Business Black, Arabic, #238

 8732    |S| Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118

 8733    |A| Quiet Touch Keyboard - Business Black, Korean, #413

 8734    |A| Quiet Touch Keyboard - Business Black, Chinese/US, #467

 8735    |A| Quiet Touch Keyboard - Business Black, French Canadian, #445

 8736    |A| Quiet Touch Keyboard - Business Black, Thailand, #191

 8738    |A| Quiet Touch Keyboard - Business Black, Russian, #443

 8739    |A| Quiet Touch Keyboard - Business Black, Croatian, #105

 8740    |A| Quiet Touch Keyboard - Business Black, US English ISO9995,

         | |      #103P

 8741    |A| 3-Button Mouse - Business Black

 9004    |A| Southern Hemisphere Designator for Monitors

 9300    |A| Language Group Specify - US English

 9703    |A| Language Group Specify - French

 9704    |A| Language Group Specify - German

 9705    |A| Language Group Specify - Polish

 9707    |A| Language Group Specify - Portuguese

 9708    |A| Language Group Specify - Spanish

 9711    |A| Language Group Specify - Italian

 9712    |A| Language Group Specify - Canadian French

 9714    |A| Language Group Specify - Japanese

 9715    |A| Language Group Specify - Traditional Chinese (Taiwan)

 9716    |A| Language Group Specify - Korean

 9719    |A| Language Group Specify - Hungarian

 9720    |A| Language Group Specify - Slovakian

 9721    |A| Language Group Specify - Russian

 9722    |A| Language Group Specify - Simplified Chinese (PRC)

 9724    |A| Language Group Specify - Czech

 9800    |A| Power Cord Specify - United States/Canada

 9802    |A| Power Cord Specify -  Brazil (125V, 15A)

 9820    |A| Power Cord Specify - Belgium, Finland, France (250V, 16A)

 9821    |A| Power Cord Specify - Denmark (250V, 10A)

 9825    |A| Power Cord Specify - United Kingdom (250V, 13A)

 9827    |A| Power Cord Specify - Israel (250V, 6-16A)

 9828    |A| Power Cord Specify - Switzerland (250V, 10A)

 9829    |A| Power Cord Specify - South Africa/Pakistan (250V, 16A)

 9830    |A| Power Cord Specify - Italy (250V, 10A and 16A)

 9831    |A| Power Cord Specify - Argentina (250V, 10A)

 9833    |A| Power Cord Specify - Thailand (250V, 15A)

 9834    |A| Power Cord Specify - Uruguay (250V, 10A)

Model Conversions

None.

alt="Back to top"/>Back to top

cellpadding="0" summary="layout">

Technical Description

summary="layout">

alt="TOC Link"/>
Physical Specifications
alt="TOC Link"/>
Operating Environment
alt="TOC Link"/>
Limitations

alt="TOC Link"/>
Hardware Requirements
alt="TOC Link"/>
Software Requirements

Physical Specifications

Tower:

Width: 215 mm (08.5 in)

Depth: 617 mm (24.0 in)

Height: 426 mm (16.8 in)

Rack - Mount:

Width: 426 mm (16.8 in)

Depth: 617 mm (24.0 in)

Height: 215 mm (08.5 in)

Weight:

35.5 kg (78.0 lb) - Minimum Configuration

43.1 kg (94.8 lb) - Maximum Configuration

Operating Environment

Temperature: (Operating) 16 to 32 degrees C (60.8 to 89.6 F)

Relative humidity: 8 % to 80 %

Maximum wet bulb: (Power Off) 27 degrees C (80 F)

Operating voltage: 100 to 127 or 200 to 240 V ac (auto-ranging)

Operating frequency: 47/63 Hz

Power requirements: 300 watts (typical); 450 watts (maximum)

Thermal output: 400 Btu/hour (typical); 794 Btu/hour (maximum)

Power source loading:

0.30 kVA (typical configuration)

0.50 kVA (maximum configuration)

Maximum altitude: 2,135 m (7,000 ft)

Noise Level and Sound Power

Sound Power: Model 6E1 6.1 Bels Idle/6.1 Bels Operating

EMC Conformance Classification

This equipment is subject to FCC rules and it shall comply with the
appropriate FCC rules before final delivery to the buyer or centers of
distribution.

U.S.A.: FCC Class B for Tower; FCC Class A for Rack Mount

Europe: CISPR 22 Class B for Tower; CISPR 22 Class A for Rack Mount

Japan: VCCI-B for Tower; VCCI-A for Rack Mount

Korea: Korean Requirement Class B for Tower; Class A for Rack Mount

China: People's Republic of China commodity inspection law

Homologation -- Telecom Environmental Testing (Safety and
EMC)

Homologation approval for specific countries has been initiated with
the IBM Homologation and Type Approval (HT&A) organization in LaGaude.
This IBM pSeries model and applicable features meet the environmental
testing requirements of the country TELECOM and have been designed and
tested in compliance with the Full Quality Assurance Approval (FQAA)
process as delivered by the British Approval Board for Telecom (BABT),
the U.K. Telecom Regulatory authority.

Product Safety/Country Testing/Certification

UL 1950 Underwriters Laboratory, Safety Information

CSA C22.2 No. 950-M86

EN60950 European Norm

ENN55022: 1998 (Class B for Tower; Class A for Rack)

EN55024

EN61000-3-2

EN61000-3-3

IEC 950, Edition 1, International Electrotechnial Commission, Safety
Information

Nordic deviations to IEC-950 1st Edition, as outlined in document
EMKO-TSE(05-SEC) 200/93

General Requirements

The product is in compliance with IBM Corporate Bulletin C-B
0-2594-000 Statement of Conformity of IBM Product to External Standard
(Suppliers Declaration).

Limitations

Processor cards

1-way (#5322) 333 MHz POWER3-II processor, 1-way (#5300) 375 MHz
POWER3-II processor, and 1-way (#5309) 450 MHz POWER3-II cannot be mixed
in a 2-way configuration.

Ultra3 SCSI backplane feature number 6567 is required when ordering
processor feature numbers 5300 or 5309. It is optional with processor
feature number 5322.

Processor cards must be installed starting in slot 1 first, then slot
2.

Power Supply

Base machine contains two AC power supplies (#6277) in the lower two
slots. #6277 is initial order only.

Redundant power supply

AC (#6275)

System Memory

A maximum of 8 GB of system memory.

A minimum of 512 MB of memory is required.

Memory DIMMs must be ordered and installed in pairs on the memory
card. They must be installed starting at the bottom of the card (card
slot J1 and J2) and then moving up. Refer to Figure 1.

Figure 1. Memory Card

___________________________________________________________
� _________________ ________________ �
� �_________________� J15 J16�________________� �
� _________________ ________________ �
� �_________________� J13 J14�________________� �
� _________________ ________________ �
� �_________________� J11 J12�________________� �
� _________________ ________________ �
� �_________________� J9 J10�________________� �
� _________________ ________________ �
� �_________________� J7 J8 �________________� �
� _________________ ________________ �
� �_________________� J5 J6 �________________� �
� _________________ ________________ �
� �_________________� J3 J4 �________________� �
� _________________ ________________ �
� �_________________� J1 J2 �________________� �
�______________ ______________�
�______________________________�

PCI Card Slots

There are five PCI slots:

Slots 1 and 2 are 64-bit, 3.3V, and run at 50 MHz.

Slot 3 is 64-bit, 5V, and runs at 33 MHz.

Slots 4 and 5 are 32-bit, 5V, and runs at 33 MHz.

Refer to Figure 2. Figure 2. Processor, Memory, and Adapter
Slot Locations

Top View
____________________________________________
Front -- | |
| __________________ |
PCI slot 1 -- | |__________________| |
| __________________ |
PCI slot 2 -- | |__________________| |
| __________________ |
PCI slot 3 -- | |__________________| |
| __________________ |
PCI slot 4 -- | |__________________| |
| __________________ |
PCI slot 5 -- | |__________________| |
| _______________________ |
Memory card slot 0 -- | |_______________________| |
| _______________________ |
CPU card slot 1 -- | |_______________________| |
| _______________________ |
CPU card slot 2 -- | |_______________________| |
| |
| |
|____________________________________________|

Figure 3. Memory Features

Feature
Feature Number Minimum Maximum
========================== ======= ======= =======
512 MB (2 x 256 MB DIMMs) 4120 0 8
1024 MB (2 x 512 MB DIMMs) 4121 0 8

Graphics Adapters

Graphics adapter, keyboard, and mouse are not required in the minimum
configuration.

The maximum number of graphics adapters supported in the system is
four.

Refer to Figure 4 for additional graphics adapter limitations.

Audio

Audio is not supported on the system

Figure 4. Graphics Adapters

Priority Adapter Number Max Slot Priority Size
======== ======= ======= === ============= =====
4 GXT135P 2848 4 1,2,3,4,5 Short
4 GXT135P 2849 4 1,2,3,4,5 Short

I/O Adapters

The PCI Advanced SerialRAID Plus adapter (#6230) can be selected with
or without the Fast-Write Cache Option card (#6235).

The SSA Fast-Write Cache Option card (#6235) is a cache upgrade for
the SSA Advanced SerialRAID Plus adapter (#6230) and can only be selected
along with that adapter (maximum of one per #6230).

The Gigabit Fibre Channel Adapter (#6228) is restricted to only one
adapter in slots 1 or 2 and/or one adapter in slots 3, 4, or 5.

Feature numbers 2498 and 4258 are required for internal RAID.
Feature 4258 requires feature 2498 or 6203, or follow-on adapter to be
installed.

Refer to Figure 5 for additional I/O adapter limitations.

Figure 5. I/O Adapter Features

Priority I/O Adapter Number Max Slot Priority Size
-------- ----------- ------ --- ------------- ----
1 Cryptographic Coprocessor 4963 2 1,2 Short
1a 2-port Gigabit Ethernet 5707 2 1,2 Short
1b 2-port 10/100/1000 Ethernet 5706 2 1,2 Short
1d S/390 Escon Channel PCI 2751 2 3,4,5 Long
1e Ultra SCSI 6206 2 5,4,3 Short
1h Gigabit Fiber Channel 6228 2 1,2,3,4,5 Short
1i 2 Gigabit Fibre Channel 6239 2 1,2,3,4,5 Short
2 Gigabit Ethernet 2969 5 1,2,3,4,5 Short
3 Gigabit Ethernet UTP 2975 5 1,2,3,4,5 Short
3a Gigabit Ethernet-SX PCI-X 5700 5 1,2,3,4,5 Short
3b 10/100/1000 Base-TX Ethernet5701 5 1,2,3,4,5 Short
5 2-Port Multiprotocol 2962 2 5,4,3,2,1 Short
5a Ultra320 SCSI 5712 2 1,2 Short
5b Ultra320 SCSI RAID 5703 2 1,2 Long
6 Ultra3 SCSI RAID 2498 5 1,2,3,4,5 Long
7 Ultra3 SCSI 6203 5 1,2,3,4,5 Long
8 SSA RAID 5 6230 2 1,2,3,4,5 Long
N/A DIMM for #6230 6231 2 N/A N/A
N/A Cache for #6230 6235 2 N/A N/A
9 Cryptographic Coprocessor 4960 4 5,4,3,2,1 Short
9a ARTIC960 Hx 4-port 2947 4 1,2,3,4,5 Long
9b ARTIC960 RxD 6310 3 1,2,3,4,5 Long
9c HIPPI Short-wave 2732 2 1,2,3,4,5 Long
9d HIPPI Long-wave 2733 2 1,2,3,4,5 Long
10 4-Port 10/100 Ethernet 4961 5 5,4,3,2,1 Long
11 8-Port Async 2943 5 5,4,3,2,1 Short
12 128-Port Async 2944 5 5,4,3,2,1 Short
13 4/16 Token Ring 4959 4 5,4,3,2,1 Short
14 10/100 Ethernet 4962 5 5,4,3,2,1 Short
15 Ultra SCSI Differential 6204 5 5,4,3,2,1 Short
16 155 UTP ATM 4953 5 5,4,3,2,1 Short
17 155 MMF ATM 4957 5 5,4,3,2,1 Short
18 622 MMF ATM 2946 5 1,2,3,4,5 Short

Storage Devices/Bays

Default DASD is in Bolt-In DASD Bay 0. Hot-swap Hard Disk Bay 1 can
also be used for mandatory disk.

Feature numbers #6156 and #2623 can be installed only if feature
number #6567 is installed.

When feature numbers #6156 or #2623 are installed in the system, the
system performance may be degraded.

Place smallest capacity DASD first, then place DASD with next highest
capacity. Install DASD in ascending order capacity until all DASDs are
in place.

Figure 7. Storage Device Features

Feature
Device Maximum Bay Number
================================== ======= ========== =======
650 MB 48x CD-ROM 2 Media 1/2 2633
4.7 GB DVD-RAM 2 Media 1/2 2623
4-mm 20/40 GB Tape 1 Media 1 6158
8-mm 20/40 GB Tape 1 Media 1 6156
18.2 GB 10 K rpm Ultra3 SCSI Disk, 6 1,3,5,2,6,4 3263
Hot-swap
18.2 GB 10 K rpm Ultra3 SCSI Disk, 2 Media bay 1 3102
Bolt-in DASD bay 0
36.4 GB 10 K rpm Ultra3 SCSI Disk, 6 1,3,5,2,6,4 3264
Hot-swap
36.4 GB 10 K rpm Ultra3 SCSI Disk 2 Media bay 1 3119
Bolt-in DASD bay 0
73.4 GB 10 K rpm Ultra3 SCSI Disk, 6 1,3,5,2,6,4 3265
Hot swap
73.4 GB 10 K rpm Ultra3 SCSI Disk, 2 Media bay 1 3118

Figure 8. Storage Device Locations

Front View
_______________________________________________________
| __________________________ |
| | | |
| | Operator Panel/ | ___ |
| | Bolt-in DASD bay 0 | | | |
| |__________________________| | D | |
| | I | |
| ____________________________________ | S | |
| | | | K | |
| | Media bay 1 | | E | |
| |____________________________________| | T | |
| | | | T | |
| | Media bay 2 | | E | |
| |____________________________________| |___| |
| | Hot-Swap | |
| | Hard Disk 1 | |
| |____________________________________| |
| | Hot-Swap | |
| | Hard Disk 2 | |
| |____________________________________| |
| | Hot-Swap | |
| | Hard Disk 3 | |
| |____________________________________| |
| | Hot-Swap | |
| | Hard Disk 4 | |
| |____________________________________| |
| | Hot-Swap | |
| | Hard Disk 5 | |
| | ___________________________________| |
| | Hot-Swap | |
| | Hard Disk 6 | |
| |____________________________________| |
|_______________________________________________________|

IDE/SCSI Cable Configurations

IDE CD-ROM (#2633 or follow-on) requires #4246

Disk drive in DASD bay 0 (#3102, #3119 or follow-on) requires #4259,
#4247 or #4248 and #4249 (Since #3102 or #3119 is in the base, either
#4259, #4247 or #4248 and #4249 must be in initial order)

Device(s) in media bay 1 or 2 (#2623, #6156, #6158, #3102, #3119 or
follow-ons) requires #4259, or #4248 and #4249

SCSI hot-swap disk drive (#3263, #3264, or follow-on) requires #4247
or #4248 and #4249

#4259 is used to connect the integrated controller to the media bays
and bolt-in DASD. Required when cable #4258 is used in the configuration
and a device is in media bay 1 or 2, or bolt-in bay 0.

If feature number 4258 is installed, feature number 6203 (or follow-
ons) or feature numbers 3102 or 3119 (or follow-ons) must be installed to
assure boot capability.

Other

Feature 6166 requires feature 6567 to be installed.

Hardware Requirements

Model 6E1 Minimum System Configuration

The Model 6E1 deskside server can be configured to incorporate up to
two processors, 8GB of system memory, 5 PCI adapters, and multiple media
devices, as desired. This flexibility is made available through the many
optional features for the Model 6E1.

Each Model 6E1 must include a minimum of the following items:

One system Central Electronics Complex (CEC) enclosure with the
following items:

One Power Cord Supply, specify (#98XX or #99XX)

One Language Group, specify (#9XXX)

One Processor Card, choose from:

POWER3-II Processor: 1-way 333 MHz, 4MB L2 Cache (#5322)

POWER3-II Processor: 1-way 375 MHz, 4MB L2 Cache (#5300)

POWER3-II Processor: 1-way 450 MHz, 8MB L2 Cache (#5309)

512 MB Memory Minimum:

Choose 512 MB Minimum from:

512 MB Memory (2x256 MB DIMMs) (#4120)

1024 MB Memory (2x512 MB DIMMs) (#4121)

One 18.2 GB Ultra3 SCSI Disk Drive (#3102 or #3263)

One Diskette Drive

One CD-ROM (#2633) or DVD-RAM (#2623):

Cables #4246 and #4259 for CD-ROM

Cables #4259 for DVD-RAM

Two AC Power Supplies (#6277)

Software Requirements

The Model 6E1 requires AIX Version 4.3.3 or 5.1, or later.

Shipment Group: The Model 6E1 is shipped with the
following:

Language group, which includes system publications (the appropriate
specify code must be on the order)

Power cords

alt="Back to top"/>Back to top

cellpadding="0" summary="layout">

Publications

None.

alt="Back to top"/>Back to top

cellpadding="0" summary="layout">

Features -- Specify/Special/Exchange

summary="layout">

alt="TOC Link"/>
No Charge Specify Codes
alt="TOC Link"/>
Special Feature Codes -- Chargeable
alt="TOC Link"/>
Feature Exchanges

No Charge Specify Codes

LANGUAGES

(#9300) - Language Group Specify - US English

(#9703) - Language Group Specify - French

(#9704) - Language Group Specify - German

(#9705) - Language Group Specify - Polish

(#9707) - Language Group Specify - Portuguese

(#9708) - Language Group Specify - Spanish

(#9711) - Language Group Specify - Italian

(#9712) - Language Group Specify - Canadian French

(#9714) - Language Group Specify - Japanese

(#9715) - Language Group Specify - Traditional Chinese (Taiwan)

(#9716) - Language Group Specify - Korean

(#9719) - Language Group Specify - Hungarian

(#9720) - Language Group Specify - Slovakian

(#9721) - Language Group Specify - Russian

(#9722) - Language Group Specify - Simplified Chinese (PRC)

(#9724) - Language Group Specify - Czech

POWER

(#6275) - Power Supply, 250 Watt AC, Hot-swap, Redundant

(#6277) - Power Supply, 250 Watt AC, Hot-swap, Base and Redundant

LINECORDS

(#9800) - Power Cord Specify - United States/Canada

(#9802) - Power Cord Specify - Brazil (125V, 15A)

(#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A)

(#9821) - Power Cord Specify - Denmark (250V, 10A)

(#9825) - Power Cord Specify - United Kingdom (250V, 13A)

(#9827) - Power Cord Specify - Israel (250V, 6-16A)

(#9828) - Power Cord Specify - Switzerland (250V, 10A)

(#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)

(#9830) - Power Cord Specify - Italy (250V, 10A and 16A)

(#9831) - Power Cord Specify - Argentina (250V, 10A)

(#9833) - Power Cord Specify - Thailand (250V, 15A)

(#9834) - Power Cord Specify - Uruguay (250V, 10A)

MISCELLANEOUS

(#5005) - Software Preinstall

(#7305) - AAP Software Pre-Install Indicator

(#7779) - OEM Publications for IBM Logo Product

(#0001) - After-market (MES) Order Indicator

(#0986) - CCS Customer Service Specify (US)

(#1736) - Expedited Delivery Service Indicator

(#5001) - Customer Service Specify

Special Feature Codes -- Chargeable

Special Features - Initial Orders

PROCESSORS

(#8091) - 1-way 450MHz POWER3-II Processor Card, Express
Configurations, Factory Only

(#8092) - 1-way 450MHz POWER3-II Processor Card, Express
Configurations, Factory Only

MEMORY

(#8093) - 1024MB (2x512MB) DIMMs, Express Configurations, Factory
Only

(#8094) - 1024MB (2x512MB) DIMMs, Express Configurations, Factory
Only

(#8095) - 1024MB (2x512MB) DIMMs, Express Configurations, Factory
Only

MISCELLANEOUS

(#8096) - Express Configuration -- pSeries 610 (100C/100E)

(#8097) - Express Configuration -- pSeries 610 (200C/200E)

(#8098) - Express Configuration -- pSeries 610 (250C/250E)

(#8099) - Express Configuration -- pSeries 610 (125C/125E) RAID

Special Features - Plant and/or Field Installable

ADAPTERS

(#2498) - PCI 4-Channel Ultra3 SCSI RAID Adapter

(#2732) - IBM Short-wave Serial HIPPI PCI Adapter for RS/6000

(#2733) - IBM Long-wave Serial HIPPI PCI Adapter for RS/6000

(#2751) - S/390 ESCON Channel PCI Adapter

(#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus

(#2944) - 128-Port Asynchronous Controller, PCI bus

(#2946) - Turboways 622 Mbps PCI MMF ATM Adapter

(#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter

(#2848) - POWER GXT135P Graphics Accelerator

(#2849) - POWER GXT135P Graphics Accelerator with Digital Support

(#2962) - 2-Port Multiprotocol PCI Adapter

(#2969) - Gigabit Ethernet - SX PCI Adapter

(#2975) - 10/100/1000 Base-T Ethernet PCI Adapter

(#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter

(#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter

(#4959) - IBM Token-Ring PCI Adapter

(#4960) - IBM e-business Cryptographic Accelerator

(#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter

(#4962) - 10/100 Mbps Ethernet PCI Adapter II

(#4963) - PCI Cryptographic Coprocessor (FIPS-4)

(#4964) - PCI Cryptographic Coprocessor

(#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter

(#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

(#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter

(#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter

(#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter

(#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter

(#6203) - PCI Dual Channel Ultra3 SCSI Adapter

(#6204) - PCI Universal Differential Ultra SCSI Adapter

(#6206) - PCI Single-Ended Ultra SCSI Adapter

(#6228) - Gigabit Fibre Channel Adapter for 64-bit PCI Bus

(#6230) - Advanced SerialRAID Plus Adapter

(#6231) - 128 MByte DRAM Option Card

(#6235) - 32 MByte Fast-Write Cache Option Card

(#6239) - 2 Gigabit Fibre Channel PCI-X Adapter

(#6310) - IBM ARTIC960RxD Quad Digital Trunk PCI Adapter

CABLES

(#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable

(#2115) - PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable

(#2116) - PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device
Cable

(#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M

(#2424) - 0.6M 16-bit SCSI-2 System to System Cable

(#2425) - 2.5M 16-bit SCSI-2 System to System Cable

(#2456) - LC-SC 50 Micron Fibre Converter Cable

(#2459) - LC-SC 62.5-Micron Fiber Converter Cable

(#2709) - ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable

(#2710) - ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable

(#2861) - ARTIC960Hx 4-Port EIA-232 Cable

(#2863) - ARTIC960Hx 4-Port X.21 Cable

(#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable

(#2871) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable

(#2872) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable

(#2873) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
Cable

(#2874) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
Extension Cable

(#2875) - IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded,
1.8M 4-Port Cable

(#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable

(#2934) - Asynchronous Terminal/Printer Cable EIA-232

(#2936) - Asynchronous Cable EIA-232/V.24

(#2951) - Cable, V.24 / EIA-232

(#2952) - Cable, V.35

(#2953) - Cable, V.36 / EIA-499

(#2954) - Cable, X.21

(#3124) - Serial to Serial Port Cable for Drawer/Drawer

(#3125) - Serial to Serial Port Cable for Rack/Rack

(#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin

(#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M

(#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15
pin D-shell)

(#4247) - SCSI 2-Drop Cable: Integrated SCSI to SCSI Backplane and
Bolt-in Disk

(#4248) - SCSI Connector Cable and Repeater Card

(#4249) - 3-Drop Cable: Backplane to Media Bays/Bolt-in Disk

(#4258) - SCSI Cable, PCI Adapter to Hot-Swap Disks

(#4259) - 3-Drop Cable: Integrated SCSI to Media Bays/Bolt-in Disk

(#4353) - H-100 Bus 8-position Cable

(#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter

(#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)

(#8133) - RJ-45 to DB-25 Converter Cable

(#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232

(#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232

(#4246) - IDE 2-Drop Connector Cable

DISKS

(#3102) - 18.2 GB 10,000 RPM Ultra SCSI Disk Drive

(#3119) - 36.4GB 10,000 RPM Ultra SCSI Disk Drive

(#3118) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive

(#3263) - 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(#3264) - 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(#3265) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(#3276) - 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(#3280) - 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly

(#3281) - 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly

(#6566) - Mounting Hardware for Disk in Media Bay

DISPLAYS

(#3627) - IBM P76/P77 Color Monitor, Business Black, Captured Cable

(#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable

(#3635) - T210 Flat-Panel Monitor

(#3636) - L200P Flat Panel Monitor

(#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black,
Captured Cable

(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable

(#3639) - IBM ThinkVision L170p Flat Panel Monitor

(#3640) - IBM ThinkVision L171p Flat Panel Monitor

KEYBOARDS

(#8700) - Quiet Touch Keyboard - Business Black, US English, #103P

(#8701) - Quiet Touch Keyboard - Business Black, French, #189

(#8702) - Quiet Touch Keyboard - Business Black, Italian, #142

(#8703) - Quiet Touch Keyboard - Business Black, German/Austrian,
#129

(#8704) - Quiet Touch Keyboard - Business Black, UK English, #166

(#8705) - Quiet Touch Keyboard - Business Black, Spanish, #172

(#8706) - Quiet Touch Keyboard - Business Black, Japanese, #194

(#8707) - Quiet Touch Keyboard - Business Black, Brazilian
Portuguese, #275

(#8708) - Quiet Touch Keyboard - Business Black, Canadian French,
#058

(#8709) - Quiet Touch Keyboard - Business Black, Belgian/French, #120

(#8710) - Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
#120

(#8711) - Quiet Touch Keyboard - Business Black, Swedish/Finnish,
#153

(#8712) - Quiet Touch Keyboard - Business Black, Danish, #159

(#8713) - Quiet Touch Keyboard - Business Black, Bulgarian, #442

(#8714) - Quiet Touch Keyboard - Business Black, Swiss,French/German,
#150f/g

(#8716) - Quiet Touch Keyboard - Business Black, Norwegian, #155

(#8717) - Quiet Touch Keyboard - Business Black, Dutch, #143

(#8718) - Quiet Touch Keyboard - Business Black, Portuguese, #163

(#8719) - Quiet Touch Keyboard - Business Black, Greek, #319

(#8720) - Quiet Touch Keyboard - Business Black, Hebrew, #212

(#8721) - Quiet Touch Keyboard - Business Black, Hungarian, #208

(#8722) - Quiet Touch Keyboard - Business Black, Icelandic, #197

(#8723) - Quiet Touch Keyboard - Business Black, Polish, #214

(#8724) - Quiet Touch Keyboard - Business Black, Romanian, #446

(#8725) - Quiet Touch Keyboard - Business Black, Slovakian, #245

(#8726) - Quiet Touch Keyboard - Business Black, Czech, #243

(#8727) - Quiet Touch Keyboard - Business Black, Turkish, #179

(#8728) - Quiet Touch Keyboard - Business Black, Turkish, #440

(#8729) - Quiet Touch Keyboard - Business Black, LA Spanish, #171

(#8730) - Quiet Touch Keyboard - Business Black, Arabic, #238

(#8732) - Quiet Touch Keyboard - Business Black, Serbian-Cyrillic,
#118

(#8733) - Quiet Touch Keyboard - Business Black, Korean, #413

(#8734) - Quiet Touch Keyboard - Business Black, Chinese/US, #467

(#8735) - Quiet Touch Keyboard - Business Black, French Canadian,
#445

(#8736) - Quiet Touch Keyboard - Business Black, Thailand, #191

(#8738) - Quiet Touch Keyboard - Business Black, Russian, #443

(#8739) - Quiet Touch Keyboard - Business Black, Croatian, #105

(#8740) - Quiet Touch Keyboard - Business Black, US English ISO9995,
#103P

MEMORY

(#4120) - 512MB (2x256MB) DIMMs, 200-pin 10NS SDRAM

(#4121) - 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM

MEDIA DEVICES

(#2623) - 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)

(#2633) - IDE CD-ROM Drive (Black bezel)

(#2634) - 16X/48X(max) IDE DVD-ROM Drive

(#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology

(#6134) - 60/150 GB 16-bit 8mm Internal Tape Drive

(#6156) - 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)

(#6158) - 20/40GB 4mm Internal Tape Drive

MISCELLANEOUS

(#3752) - Service Package

(#6166) - Acoustic Package for Deskside/Desktop Systems

(#6567) - Ultra3 SCSI Backplane for Hot-swap Disks

(#8741) - 3-Button Mouse - Business Black

PROCESSORS

(#5300) - 1-Way 375MHz POWER3-II Processor Card

(#5309) - 1-way 450MHz POWER3-II Processor Card

(#5322) - 1-Way 333MHz POWER3-II Processor Card

SPECIFY CODES

(#9004) - Southern Hemisphere Designator for Monitors

Feature Descriptions

The following is a list of all feature codes in numeric order.

Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.

Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.

The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.

(#0001) After-market (MES) Order Indicator

This feature may be used in orders for features ordered by MES. This
feature prevents configuration checking. It does not have to be repeated
for subsequent MES orders for the same machine.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#0001)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 0)

OS level required: None

Initial Order/MES/Both/Supported: MES

(#0986) CCS Customer Service Specify (US)

This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).

FC 0986 is available only on the initial plant order.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#0986)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

(#1736) Expedited Delivery Service Indicator:

(No Longer Available as of June 25, 2004)

This feature number specifies that a system will be shipped to the
customer with expedited 2 day delivery.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#1736)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable

Attributes provided: Attachment of multiple hosts to the PCI SCSI-2
differential adapter

Attributes required: 1 external SCSI-2 Fast/Wide Port

For 7028-6E1: (#2114)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2115) PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable

(No Longer Available as of April 26, 2002)

Attributes provided: Attachment of external 2-port 16-bit SE devices
to the PCI SCSI-2 Fast/Wide adapter

Attributes required: 1 external SCSI-2 Fast/Wide Port

For 7028-6E1: (#2115)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2116) PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable

(No Longer Available as of April 26, 2002)

Attributes provided: Attachment of external 2-port 16-bit
differential devices to the PCI SCSI-2 differential adapter

Attributes required: 1 external SCSI-2 Fast/Wide Port

For 7028-6E1: (#2116)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M

0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI
connector to a 68-pin P style connector. Cable has male Mini-68 pin
VHDCI connector on one end and a female 68 pin P style connector on the
other. Length = 0.3 meters.

Attributes provided: Attachment of supported external sub-system to
integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.

Attributes required: None

For 7028-6E1: (#2118)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2424) 0.6M 16-bit SCSI-2 System to System Cable

(No Longer Available as of December 10, 2004)

This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.

Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at
each end

Attributes required: 68-pin SCSI Interface

For 7028-6E1: (#2424)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2425) 2.5M 16-bit SCSI-2 System to System Cable

This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.

Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at
each end

Attributes required: 68-pin SCSI Interface

For 7028-6E1: (#2425)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2456) LC-SC 50 Micron Fibre Converter Cable

50 micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.

Attributes provided: Attachment to external 50 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.

Attributes required: None

For 7028-6E1: (#2456)

Minimum required: 0

Maximum allowed: No Max (Initial order maximum: No Max)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#2459) LC-SC 62.5-Micron Fiber Converter Cable

62.5-micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.

Attributes provided: Attachment to external 62.5-micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.

Attributes required: None

For 7028-6E1: (#2459)

Minimum required: 0

Maximum allowed: No Max (Initial order maximum: No Max)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter

(No Longer Available as of December 10, 2004)

The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a non-
bootable high performance Ultra3 SCSI RAID Adapter providing RAID 0,1,1E,
5, or 5E capability and can address up to sixty 16-bit SCSI physical disk
drives on four independent SCSI buses.

To increase the data writing performance, a 128 MByte fast-write cache
is provided as a resident part of this adapter. The 128 MByte fast-write
cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter
that utilizes non-volatile RAM. During the unlikely event of an PCI
4-Channel Ultra3 SCSI RAID Adapter failure, a replacement PCI 4-Channel
Ultra3 SCSI RAID Adapter can be installed and the fast-write cache can be
removed from the failing adapter and installed in the new adapter
insuring data integrity. The 128 MByte fast-write cache can provide an
significant improvement in data throughput and response time during
certain sequence write operations compared to SCSI RAID adapters without
the fast-write cache. The response time and data transfer improvement
will vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.

The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3
SCSI buses. There are two internal ports and four external ports. The
two internal ports are shared with two of the external ports. Two of the
four busses can drive either an internal port or an external port. The
other two busses only drive external ports. The internal ports can be
used to provide an internal RAID solution on supporting RS/6000 systems.
Systems with one or two internal 6-pack disks can attach to a PCI
4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide
connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate. The four external ports also provide connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate.

Limitations:

The four external ports do not support the connection to the IBM
7131-105 external Fast/Wide SCSI disk enclosure.

Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that
run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up
to 80MBytes/s), the internally attached disk drives will run at a maximum
SCSI bus data rate specified by that supporting system backplane.

In order for full support and to take full advantage of the Ultra3 (up
to 160 MBytes/s) speed of this adapter, the proper AIX level also needs
to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX
versions support the full range of SCSI bus data rates (including Ultra3
SCSI up to 160 MByte/s). Check the AIX level your system has or is able
to support.

Attributes provided: Attachment of internal and external SCSI
devices

Attributes required: One PCI bus slot

For 7028-6E1: (#2498)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2623) 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)

(No Longer Available as of September 24, 2004)

The SCSI-2 DVD-RAM drive is a multifunction storage device capable of
reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This
device also provides read/write compatibility with conventional 2.6GB
DVD-RAM discs. System boot and install functions are supported with
CD-ROM and DVD-RAM media.

Characteristics:

Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer
diameter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)

Interface: SCSI-2 supporting synchronous and asynchronous data
transfer

Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM

High-speed synchronous burst rate of 10MB/second

Loading tray accommodates both 8cm discs (in horizontal orientation
only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges

Operates in either vertical or horizontal position

Reads multi-session discs

Reads CD-recordable discs

Reads CD-RW discs

Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media

Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA
and audio

Contains headphone output and line output for audio

Limitations:

DVD video is not supported.

Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM

Attributes required: 1 half high media bay and one SCSI address

For 7028-6E1: (#2623)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

Note: One of #2623 or #2633 required.

(#2633) IDE CD-ROM Drive (Black bezel)

(No Longer Available as of December 30, 2005)

The 48X (Max) IDE Internal CD-ROM Drive is a tray loading CD-ROM drive
providing up to 7200KB/sec maximum media data transfer rate. It is a
5.25 inch half-high form factor, multi-session capable, CD-ROM drive
which provides state of the art performance and supports existing 650MB
CD-ROM discs.

Characteristics:

Media Data Transfer Rate: 7200 KB/sec (Max)

Interface: IDE/ATAPI

Avg. Random Access Time: 75ms (typical)

Buffer Memory: 128KB

Media capacity: 650MB

Multisession capable (Reads CDR & CDRW media)

5.25-inch half-high form factor

Operates in either vertical or horizontal positions

Interface supports standard and extended XA formats

Loading tray supports 12cm and 8cm disks

Attributes provided: 650MB 48X (Max) (Up to 7200KB/sec) IDE CE-ROM

Attributes required: 1 half-high media bay

For 7028-6E1: (#2633)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

Note: One of #2623 or #2633 required.

(#2634) 16X/48X(max) IDE DVD-ROM Drive

The 16X/48X(max) IDE DVD-ROM Drive is an internal tray loading DVD-ROM
drive providing up to 7200KB/sec (CD-ROM) and 22.16MB/sec (DVD-ROM) data
transfer rates. It is a 5.25 inch half-high form factor multi-session
capable, DVD-ROM drive which provides state of the art performance and
supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4 GB DVD-ROM
(double-sided) discs. This drive also reads Type II (removable from
cartridge) DVD-RAM discs at DVD-ROM speeds. System boot and install
functions are supported with CD-ROM and DVD-RAM media.

Characteristics:

Media Data Transfer Rate: CD-ROM=7200 KB/sec (max):
DVD-ROM=22.16MB/sec (max)

Interface: IDE/ATAPI

Avg. Random Access Time: CD-ROM=90ms(typical);
DVD-ROM=135ms(typical)

Buffer Memory: 256KB

Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4
GB(double-sided)

Multisession capable (Reads CD/R & CD-R/W media)

5.25-inch half-high form factor

Operates in either vertical or horizontal positions

Interface supports standard and extended XA formats

Loading tray supports 12cm and 8cm disks

Limitations:

DVD video is not supported.

This DVD-ROM drive is limited to reading only CD-type formatted media
when running with AIX 5.1 software.

Attributes provided: 16X/48X(max) IDE DVD-ROM Drive

Attributes required: 1 half-high media bay

For 7028-6E1: (#2634)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 5.1, 5.2 or later. Linux - Refer to the
following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: One of #2633, #2634, #2623, or #2627 required.

(#2709) ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable

(No Longer Available as of June 25, 2004)

4-Port T1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
ARTIC960RxD Quad Digital Trunk adapter.

Attributes provided: 4-Port T1 RJ48 cable

Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk
Adapter

For 7028-6E1: (#2709)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310.

(#2710) ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable

(No Longer Available as of June 25, 2004)

4-Port E1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
the ARTIC960RxD Quad Digital Trunk Adapter.

Attributes provided: 4-Port E1 RJ-48 cable

Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk
Adapter

For 7028-6E1: (#2710)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310.

(#2732) IBM Short-wave Serial HIPPI PCI Adapter for RS/6000

(No Longer Available as of December 10, 2004)

The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit
PCI adapter supporting TCP/IP over a serial HIPPI link. Data is sent and
received over optical fiber at 1.2 Gbps using the HIPPI standard 20/24
bit encoding scheme with short wave optical transducers. The effective
maximum data rate of the HIPPI interface is 800 Mbps.

Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements.

http://www.ibm.com/servers/aix/os/adapters/51.html

Attributes provided: Attachment to HIPPI Network

Attributes required: One 32-bit PCI Slot and LPP 5765-E07

For 7028-6E1: (#2732)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 0)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: MES Only

CSU: Yes

Return parts MES: No

(#2733) IBM Long-wave Serial HIPPI PCI Adapter for RS/6000

(No Longer Available as of August 8, 2003)

The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit
PCI adapter supporting TCP/IP over a Serial HIPPI link. Data is sent and
received over optical fiber at 1.2 Gbps using the HIPPI standard 20/24
bit encoding scheme with long wave optical transducers. The effective
maximum data rate of the HIPPI interface is 800 Mbps.

Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements.

http://www.ibm.com/servers/aix/os/adapters/51.html

Attributes provided: Attachment to HIPPI Network

Attributes required: One 32-bit PCI Slot and LPP 5765-E07

For 7028-6E1: (#2733)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 0)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: MES Only

CSU: Yes

Return parts MES: No

(#2751) S/390 ESCON Channel PCI Adapter

(No Longer Available as of December 10, 2004)

Provides RS/6000 Systems the ability to attach to IBM Enterprise
Systems Connection (ESCON) channels of the System/390 server. The S/390
ESCON Channel PCI Adapter attaches directly to an ESCON channel providing
fiber optic links using LED technology, and also attaches to ESCON
Directors (fiber optic switches) permitting connections to multiple
Channels. Host operating systems supported include VM/ESA, MVS/ESA, and
OS/390.

Supported on AIX Version 4.3.0 with separately orderable device
driver in License Program Number 5765-D49.

Control Unit Multi-path definitions are not supported in IOCP or HCD.

3174 Emulation Mode is not supported. For SNA users, MPC Emulation
is now supported.

S/390 TCP/IP support is available in:

IBM TCP/IP Version 3.1 or later for VM (5735-FAL)

IBM TCP/IP Version 3.1 or later for MVS (5735-HAL)

MPC support is available in IBM TCP/IP Open Edition Version 3.4 or
later, which is shipped as part of OS/390 2.5 (5647-A01) when used in
conjunction with IBM VTAM Version 4.4 or later (5695-117).

Requires ESCON external cabling

APAR OW33336 is recommended to be installed on OS/390 BCP.

Characteristics:

Single slot, full length PCI adapter

Supports VM, MVS, and OS/390

Supports 3088, CLAW (TCP/IP), and MPC (SNA and TCP/IP) Emulations.

Supports CLIO/S.

Provides the same API for user-written application programs for CLAW
and 3088 Emulations as ESCON Channel Connectivity for AIX V1.1 LPP
(5765-603)

Supports attachment to either 10MB or 17MB ESCON channels.

Supports ESCON Multiple Image Facility (EMIF)

Maximum distance supported using a combination of LED and XDF ESCON
links is 43 Km.

Attributes provided: 1 ESCON channel attachment interface

Attributes required: One PCI slot

For 7028-6E1: (#2751)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 0)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: MES Only

CSU: Yes

Return parts MES: No

(#2848) POWER GXT135P Graphics Accelerator

(No Longer Available as of December 12, 2003)

The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes.

Hardware Description

128-bit graphics processor

8-bit CLUT or 24-bit true color

16 MB SDRAM

32-bit PCI interface

Universal PCI (5.0v or 3.3v)

1 hardware color map

Features Supported:

Up to approximately 16.7 million colors

Rectangular clipping

2 analog monitor outputs

Up to 1600 x 1200 resolution

60 to 85 Hz refresh rates (ISO 9241, Part 3)

APIs Supported:

X-Windows and Motif

UMS 2.3.0 (no hardware scaling)

Software Requirements: AIX Versions 4.3.3 or 5.1

Attributes provided: 2D Graphics

Attributes required: 1 PCI slot

For 7028-6E1: (#2848)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2849) POWER GXT135P Graphics Accelerator with Digital Support

The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.

Hardware Description

128-bit graphics processor

8-bit CLUT or 24-bit true color

16 MB SDRAM

32-bit PCI interface

Universal PCI (5.0v or 3.3v)

1 hardware color map

Features Supported

Up to approximately 16.7 million colors

Rectangular clipping

2 analog monitor outputs at up to 1280 x 1024 resolution

1 analog monitor output at up to 2048 x 1536 resolution

1 digital monitor output at up to 1600 x 1200 resolution

60 to 85 Hz refresh rates (ISO 9241, Part 3)

APIs Supported

X-Windows and Motif

UMS 2.3.0 (no hardware scaling)

Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)

Attributes provided: 2D Graphics

Attributes required: 1 PCI slot

For 7028-6E1: (#2849)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: AIX 5.1 or AIX 5.2, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#2861) ARTIC960Hx 4-Port EIA-232 Cable

Attributes provided: 4-port EIA-232 cable for (#2947)

Attributes required: One #2947 adapter

For 7028-6E1: (#2861)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 2947.

(#2863) ARTIC960Hx 4-Port X.21 Cable

Attributes provided: 4-port X.21 cable for (#2947)

Attributes required: One #2947 adapter

For 7028-6E1: (#2863)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 2947.

(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable

Attributes provided: 4-port X.35 (DTE) cable for (#2947)

Attributes required: One #2947 adapter

For 7028-6E1: (#2864)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 2947.

(#2871) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable

(No Longer Available as of June 25, 2004)

Attributes provided: Connection of 1 to 4 T1 Trunk lines.

Attributes required: One (#6310) adapter

For 7028-6E1: (#2871)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310.

(#2872) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable

(No Longer Available as of June 25, 2004)

Attributes provided: Connection of 1 to 4 T1 Trunk lines.

Attributes required: One (#6310) adapter and (#2871) cable

For 7028-6E1: (#2872)

Minimum required: 0

Maximum allowed: 16 (Initial order maximum: 16)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310 and feature code number 2871.
Maximum of 4 per adapter.

(#2873) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable

(No Longer Available as of June 25, 2004)

Attributes provided: Connection of 1 to 4 E1 Trunk lines.

Attributes required: One (#6310) adapter

For 7028-6E1: (#2873)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310.

(#2874) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable

(No Longer Available as of June 25, 2004)

Attributes provided: Connection of 1 to 4 E1 Trunk lines.

Attributes required: One (#6310) adapter and ##2873) cable

For 7028-6E1: (#2874)

Minimum required: 0

Maximum allowed: 16 (Initial order maximum: 16)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310 and feature code number 2873.
Maximum of 4 per adapter.

(#2875) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, 1.8M 4-Port Cable

(No Longer Available as of December 27, 2002)

Attributes provided: Connection of 1 to 4 E1 Trunk lines.

Attributes required: One (#6310) adapter

For 7028-6E1: (#2875)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310.

(#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable

This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 4-position cable should be used when
four or less adapters with H.100 connectors will be interconnected. When
more than 4 and less than or equal to 8 adapters will be connected, the
H.100 Bus 8-Drop Cable (#4353) should be used.

Attributes provided: H.100 bus connection between adapters

Attributes required: Two to Four H.100 adapters

For 7028-6E1: (#2877)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310.

(#2934) Asynchronous Terminal/Printer Cable EIA-232

The Asynchronous Printer/Terminal Cable is used for attaching
printers, plotters, and terminals that support the EIA-232 standard to
any asynchronous adapter. This cable is the equivalent of the
combination of FC 2936 (modem cable) and FC 2937 (printer/terminal
interposer) and replaces this method of printer/terminal attachment.

This cable is 3m (9.8 feet) long, uses DB25 connectors and is
supported on all RS/6000 systems using any asynchronous ports. It is
used in conjunction with:

FC 2931 (8-port Async Adapter EIA232, ISA bus)

FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)

Attributes provided: EIA232 device attachment capability

Attributes required: Any RS/6000 Asynchronous port

For 7028-6E1: (#2934)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2936) Asynchronous Cable EIA-232/V.24

Used to attach a modem to the standard I/O ports with the 10-pin to
25-pin converter cable (shipped with the system), 8-port Cable Assembly,
16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to
DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote
Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The
cable is 3 meters (9.8 feet) in length.

Attributes provided: Modem attachment to async or serial port

Attributes required: Async or serial port

For 7028-6E1: (#2936)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus

For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.

Attributes provided: 8 Async ports

Attributes required: One PCI slot

For 7028-6E1: (#2943)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2944) 128-Port Asynchronous Controller, PCI bus

The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.

Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.

The new RANs being announced provide 16 EIA-232 (#8137) or 16 RS-422
(#8138) ports yielding a total of 128-ports in a maximum configuration.

Existing RANs feature numbers 8130, 8134, or 8136 can also be used
with this adapter. If these RANs are connected the synchronous channel
the data rate drops down to 1.2 Mbps. For the best results keep the
previous and new RANs on separate synchronous channels.

Attributes provided: Up to 128 Async Ports

Attributes required: One PCI slot, One to eight (#8137) or (#8138)

For 7028-6E1: (#2944)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2946) Turboways 622 Mbps PCI MMF ATM Adapter

(No Longer Available as of December 17, 2004)

The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal
PCI Adapter. This adapter provides direct access to the ATM network at a
dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI
MMF ATM Adapter is a short form-factor adapter that interfaces to the
system via the PCI bus and connects to the 622 Mbps ATM network via
dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF
ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for
packet memory. This ATM adapter also provides a hardware assist for TCP
checksum which can provide a performance improvement by minimizing the
host CPU cycles .

Attributes provided: One full-duplex connection to 622 ATM network

Attributes required: One available PCI card slot

For 7028-6E1: (#2946)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter

The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one-
slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of:
EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of
up 2.0M bps. Software support is provided by ARTIC960 Support for AIX,
Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC
and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that
provide AIXLink X.25 LPP Version 1.1.5 support.

Note: This adapter may have AIX 5.1 support limitations. Go to to the
following URL to view the latest AIX 5.1 support limitation statements.

http://www.ibm.com/servers/aix/os/adapters/51.html

Attributes provided: One to four WAN connections at up to 2.0Mbps

Attributes required: One full length 32-bit PCI slot, AIX Version
4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5,
4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).

For 7028-6E1: (#2947)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#2951) Cable, V.24 / EIA-232

(No Longer Available as of December 30, 2005)

V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.

For 7028-6E1: (#2951)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2952) Cable, V.35

(No Longer Available as of December 30, 2005)

V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.

For 7028-6E1: (#2952)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2954) Cable, X.21

(No Longer Available as of December 30, 2005)

X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.

For 7028-6E1: (#2954)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2962) 2-Port Multiprotocol PCI Adapter

(No Longer Available as of December 30, 2005)

This adapter provides high-speed connections between stand-alone
system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI
Adapter connects via external communications equipment including Channel
Service Units (CSU), Data Service Units (DSU), or through synchronous
modems.

This adapter together with IBM AIXlink/X.25 provides a two-port
connection to X.25 packet switched networks. IBM AIXlink/X.25 is a
separately orderable LPP (5696-926).

2-Port Multiprotocol PCI Adapter with an appropriate cable is
compatible with:

X.21 DCE - Using 2-Port Cable, X.21 (#2954)

CCITT X.21 Signalling

CCITT V.11 Electrical

CCITT X.27 Electrical

EIA-422-A Electrical

ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable

V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)

CCITT V.24 Signalling

CCITT V.28 Electrical

CCITT X.21bis Electrical and Signalling

EIA-232-C Electrical and Signalling

ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable

V.35 DCE - Using 2-Port Cable, V.35 (#2952)

CCITT V.35 Some signals for signalling

CCITT V.28 Some signals for electrical and signalling

ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable

V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)

CCITT V.10 Electrical

CCITT V.11 Electrical

Attributes provided: Two high speed WAN connections

Attributes required: One PCI slot

For 7028-6E1: (#2962)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2969) Gigabit Ethernet - SX PCI Adapter

(No Longer Available as of December 12, 2003)

Provides a 1 Gbps (1000BaseT) full-duplex Ethernet LAN connection.

Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet switch.

Attributes required: Available 64 bit PCI slot, AIX 4.3.2 or later
is required for Hardware Checksum and Jumbo Frame support.

For 7028-6E1: (#2969)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#2975) 10/100/1000 Base-T Ethernet PCI Adapter

(No Longer Available as of December 12, 2003)

10/100/1000 Base-T Ethernet PCI Adapter is a Full Duplex Gigabit
Ethernet adapter designed with highly integrated components to optimize
cost and performance. The adapter interfaces to the system via the PCI
bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted
Pair (UTP) cable for distances of up to 100m. The 10/100/1000 Base-T
Ethernet PCI Adapter supports jumbo frames for full duplex Fast & Gigabit
Ethernet.

AIX's Network Install Manager (NIM) boot capability is supported with
this adapter provided your system firmware is at the proper support
level. Systems manufactured prior to July, 2001 may require a firmware
update. Check the following web URL to review and download latest system
firmware if needed:

http://www.austin.ibm.com/support/micro/

Note: For optimum performance, adapter should be placed in a 64 bit PCI
card slot.

Limitation: The 1000 Mbps speed is not supported in Half Duplex (HDX)
mode.

Attributes provided: One full-duplex 1000Base-T UTP connection to a
Gigabit Ethernet LAN.

Attributes required: One available PCI card slot

For 7028-6E1: (#2975)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3102) 18.2 GB 10,000 RPM Ultra SCSI Disk Drive

(No Longer Available as of August 8, 2003)

The 18.2GB 10,000 RPM Ultra SCSI Disk Drive provides 18.2GB of storage
capacity and supports the industry standard Ultra SCSI interface speed of
40 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra SCSI (16-bit, Single Ended)

Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D

Average Seek Time: 6.02 milliseconds

Average Latency: 2.99 milliseconds

Rotational Speed: 10,000 RPM

Maximum Data Transfer Rate: 44.3 MBps

Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI
adapter in order for the drive to run at 40 MBps.

Attributes provided: 18.2 GB storage capacity

Attributes required: One disk drive bay.

For 7028-6E1: (#3102)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3118) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive

(No Longer Available as of December 10, 2004)

The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of
storage capacity and supports the industry standard Ultra3 SCSI interface
speed of 160 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI-3 fast 80

Average Seek Time: 5.38 ms (based on four READS to one WRITE)

Average Latency: 3.00 ms

Rotational Speed: 10,000 RPM

Maximum Data Transfer Rate: 83.88 MBps

Note: This disk drives requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane for the
drive to run at 160 MBps. Any and all other SCSI device(s) on the same
SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) for this disk drive
to run at 160 MBps.

Attributes provided: 73.4 GB of disk storage.

Attributes required: One disk drive bay.

For 7028-6E1: (#3118)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3119) 36.4GB 10,000 RPM Ultra SCSI Disk Drive

(No Longer Available as of December 10, 2004)

The 36.4GB 10,000 RPM Ultra SCSI Disk Drive provides 36.4GB of storage
capacity and supports the industry standard Ultra SCSI interface speed of
40 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra SCSI (16-bit, Single Ended)

Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D

Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)

Average Latency: 2.99 ms

Rotational Speed: 10,000 RPM

Maximum Data Transfer Rate: 44.3 MBps

Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI
adapter in order for the drive to run at 40 MBps.

Attributes provided: 36.4GB of disk storage

Attributes required: One disk drive bay.

For 7028-6E1: (#3119)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3124) Serial to Serial Port Cable for Drawer/Drawer

This cable is available to provide a null-modem connection between the
serial ports of two system drawers that are mounted within the same rack.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#3124)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3125) Serial to Serial Port Cable for Rack/Rack

This cable is available to provide a null-modem connection between the
serial ports of two system drawers that are mounted in separate racks.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#3125)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3263) 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of August 8, 2003)

The 18.2GB 10,000 RPM Ultra3 SCSI Disk Drive provides 18.2GB of
storage capacity and supports the industry standard Ultra3 SCSI interface
speed of 160 Mbps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI-3 fast 80

Average Seek Time: 5.1 milliseconds (based on four(4) READS to one
(1) WRITE)

Average Latency: 2.99 milliseconds

Rotational Speed: 10,000 RPM

Maximum Data Transfer Rate: 44.3 MBps

Note: This disk drives requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane in order
for the drive to run at 160MBps. Also, any and all other SCSI device(s)
on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in
order for this disk drive to run at 160MBps.

Attributes provided: 18,2 GB of disk storage mounted in a carrier.

Attributes required: One disk drive bay.

For 7028-6E1: (#3263)

Minimum required: 0

Maximum allowed: 6 (Initial order maximu

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3264) 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of December 10, 2004)

The 36.4GB 10,000 RPM Ultra3 SCSI Disk Drive provides 36.4GB of
storage capacity and supports the industry standard Ultra3 SCSI interface
speed of 160 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI-3 fast 80

Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)

Average Latency: 2.99 millliseconds

Rotational Speed: 10,000 RPM

Maximum Data Transfer Rate: 44.3 MBps

Note: This disk drives requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane in order
for the drive to run at 160MBps. Also, any and all other SCSI device(s)
on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in
order for this disk drive to run at 160MBps.

Attributes provided: 36.4 GB of disk storage mounted in a carrier.

Attributes required: One disk drive bay.

For 7028-6E1: (#3264)

Minimum required: 0

Maximum allowed: 6 (Initial order maxim

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3265) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of November 18, 2005)

The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of
storage capacity and supports the industry standard Ultra3 SCSI interface
speed of 160 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI-3 fast 80

Average Seek Time: 5.38 ms (based on four READS to one WRITE)

Average Latency: 3.00 ms

Rotational Speed: 10,000 RPM

Maximum Data Transfer Rate: 83.88 MBps

Note: This disk drive requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane for the
drive to run at 160 MBps. Any and all other SCSI device(s) on the same
SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) for this disk drive
to run at 160 MBps.

Attributes provided: 73.4 GB of disk storage mounted in a carrier.

Attributes required: One disk drive bay.

For 7028-6E1: (#3265)

Minimum required: 0

Maximum allowed: 6 (Initial order maximum: 6)

OS level required: AIX 4.3.3 or later, or AIX 5.1 or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3276) 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of December 10, 2004)

The 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 146.8
GB of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of 160 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI-3 fast 160

Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE)

Average Latency: 2.99 ms

Rotational Speed 10,000 RPM

Maximum Data Transfer Rate: 67 MBps

Note: This disk drives requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane in order
for the drive to run at 160 MBps. Also, any and all other SCSI device(s)
on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in
order for this disk drive to run at 160 MBps.

Attributes provided: 146.8 GB of disk storage mounted in a carrier.

Attributes required: One disk drive bay.

For 7028-6E1: (#3276)

Minimum required: 0

Maximum allowed: 6 (Initial order maximum: 6)

OS level required: AIX 5.1 or AIX 5.2 or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3280) - 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of December 10, 2004)

The 36.4GB 15,000 RPM Ultra3 SCSI Disk Drive provides 36.4GB of
storage capacity and supports the industry standard Ultra3 SCSI interface
speed of 160 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI-3 fast 80

Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)

Average Latency: 2 millliseconds

Rotational Speed: 15,000 RPM

Maximum Data Transfer Rate: 83 MBps

Note: This disk drives requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane in order
for the drive to run at 160MBps. Also, any and all other SCSI device(s)
on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in
order for this disk drive to run at 160MBps.

Attributes provided: 36.4 GB of disk storage mounted in a carrier.

Attributes required: One disk drive bay.

For 7028-6E1: (#3280)

Minimum required: 0

Maximum allowed: 6 (Initial order maximum: 6)

OS level required: AIX 4.3.3, AIX 5.1, or later, AIX 5.2 or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3281) - 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of December 10, 2004)

The 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of
storage capacity and supports the industry standard Ultra3 SCSI interface
speed of 160 MBps.

Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high

Cable included: No

External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)

Attachment Industry Spec: SCSI-3 fast 80

Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)

Average Latency: 2 ms

Rotational Speed 15,000 RPM

Maximum Data Transfer Rate: 83 MBps

Note: This disk drives requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane in order
for the drive to run at 160MBps. Also, any and all other SCSI device(s)
on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in
order for this disk drive to run at 160MBps.

Attributes provided: 73.4 GB of disk storage mounted in a carrier.

Attributes required: One disk drive bay.

For 7028-6E1: (#3281)

Minimum required: 0

Maximum allowed: 6 (Initial order maximum: 6)

OS level required: AIX 4.3.3, AIX 5.1, or later, AIX 5.2 or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable

(No Longer Available as of July 25, 2003)

The P76/P77 monitor has the following general characteristics:

Business Black color

17-inch Flat Trinitron** CRT with a viewable image size of 406 mm
(16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.

Designed to provide reduced flicker operation at an optimum 1024 x
768 pels at up to 85 Hz non-interlaced, with a maximum addressability of
1600 x 1200 pels at 70 Hz.

Note: The P76 and P77 monitors are functionally equivalent.

Attributes provided: Color Monitor

Attributes required: Graphics Adapter

For 7028-6E1: (#3627)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable

(No Longer Available as of February 27, 2004)

The P260/P275 monitor has the following general characteristics:

Business Black color

21-inch Flat Trinitron** CRT with a viewable image size of 503 mm
(19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.

Designed to provide reduced flicker operation at an optimum
addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.

Note: The P260 and P275 monitors are functionally equivalent.

Attributes provided: Color Monitor

Attributes required: Graphics Adapter

For 7028-6E1: (#3628)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3635) - T210 Flat-Panel Monitor

(No Longer Available as of February 18, 2003)

The T210 flat-panel monitor has the following general characteristics:

Business Black color

21-inch TFT LCD digital screen with a viewable image size of 528 mm
(20.8 inches) measured diagonally, incorporating a 0.207 mm pixel
pitch/type for bright, high-definition images.

Designed to provide flicker free operation at a maximum resolution of
2048 x 1536 pels at 60Hz.

Tilt/swivel stand

Attributes provided: Color Flat-panel Monitor

Attributes required: Graphics Adapter

For 7028-6E1: (#3635)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3636) L200P Flat Panel Monitor

The L200p flat-panel monitor has the following general
characteristics:

Business Black color

20.1-inch TFT LCD digital screen with a viewable image size of 510 mm
(20.1 inches) measured diagonally, incorporating a 0.255 mm pixel
pitch/type for bright, high-definition images.

Designed to provide flicker free operation at a maximum resolution of
1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in
digital mode.

Tilt/swivel stand

Attributes provided: Color Flat-panel Monitor

Attributes required: Graphics Adapter

Note: Requires #2848, #2842, or #2843 be installed in the system.

For 7028-6E1: (#3636)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable

The T541H and the L150p monitors have the following general
characteristics:

Business Black color

15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.

Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.

Tilt/swivel stand

Supports 2D Graphics Adapters only

Attributes provided: Color Flat-panel Monitor

Attributes required: 2D Graphics Adapter

For 7028-6E1: (#3637)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable

(No Longer Available as of June 24, 2005)

The IBM C220p monitor has the following general characteristics:

Business Black color

21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.

Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).

Tilt/swivel stand

Dual input allows attachment to two systems concurrently.

Depth: 483.6 mm (19.0 in.)

Height: 516.4 mm (20.3 in.)

Width: 512.8 mm (20.2 in.)

Weight: 30.5 kg (67.2 lbs.)

Attributes provided: Color Monitor

Attributes required: Graphics Adapter

For 7028-6E1: (#3638)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3639) IBM ThinkVision L170p Flat Panel Monitor

(No Longer Available as of September 30, 2005)

The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:

Business color

17.0-inch LCD digital screen with a viewable image size of
432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm
pixel pitch/type for bright, high-definition images.

Maximum resolution of 1280 x 1024.

Tilt/swivel and height adjustable stand

Analog or digital connection

Dual input allows attachment to two systems concurrently.

Internal power

Depth: 237.0 mm (9.3 in.)

Height: 457.0 mm (18.0 in.)

Width: 400.0 mm (15.7 in.)

Weight: 5.7 kg (12.6 lbs.)

Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees

Contrast ratio: 500:1 (typical)

Video inputs: 15-pin D / DVI-D

Two removable cables: one analog and one digital

Attributes provided: Color Flat-panel Monitor

Attributes required: Graphics Adapter

For 7028-6E1: (#3639)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2 )

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3640) - IBM ThinkVision L171p Flat Panel Monitor

The IBM ThinkVision L171p LCD flat-panel monitor has the following
general characteristics:

Business black color

17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.

Maximum resolution of 1280 x 1024.

Tilt/swivel and height adjustable stand

Analog or digital connection

Dual input allows attachment to two systems concurrently.

Internal power

Depth: 237.0 mm (9.3 in.)

Height: 457.0 mm (18.0 in.)

Width: 400.0 mm (15.7 in.)

Weight: 5.7 kg (12.6 lbs.)

Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees

Contrast ratio: 500:1 (minimal) 700:1 (typical)

Video inputs: 15-pin D / DVI-D

Two removable cables: one analog and one digital

Attributes provided: Color Flat-panel Monitor

Attributes required: Graphics Adapter

For 7028-6E1: (#3640)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#3752) Service Package

This kit contains service publications, wrap plugs, and diagnostic
CD-ROM. The "Diagnostics Information for Multiple Bus Systems" contains
information common to all multiple bus system units and is used primarily
for problem isolation by a customer's service specialist trained on the
unit being serviced.

These publications are intended to be used in the customer's
enterprise by the customer's own service specialists, and not by IBM
Service personnel.

Two wrap plugs are included for use in diagnostic testing of the
following connections to the system unit:

RS-232 serial I/O port

parallel I/O port

This kit also contains system diagnostic CD-ROM, along with a test
diskette, for use by the customer's service specialist (not by IBM
Service personnel).

Attributes provided: None

Attributes required: None

For 7028-6E1: (#3752)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3925) Serial Port Converter Cable, 9-Pin to 25-Pin

This cable converts the 9-pin serial port on the system to a 25-pin
serial port which allows the user to attach 25-pin serial devices to the
system.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#3925)

Minimum required: 0

Maximum allowed: 3 (Initial order maximum: 3)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#3926) Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M

This 4-meter cable allows external async devices such as printers or
terminals to be attached directly to the 9-pin serial port. This is
equivalent to using #3925 in combination with #2934.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#3926)

Minimum required: 0

Maximum allowed: 3 (Initial order maximum: 3)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#4120) 512MB (2x256MB) DIMMs, 200-pin 10NS SDRAM

(No Longer Available as of December 10, 2004)

Provides 512MB system memory with two 256MB DIMMs.

Attributes provided: 512MB System Memory

Attributes required: Two empty memory DIMM positions.

For 7028-6E1: (#4120)

Minimum required: 0

Maximum allowed: 8 (Initial order maximum: 8)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#4121) 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM

Provides 1024MB of system memory with 2 512MB DIMMS.

Attributes provided: 1024MB of system memory

Attributes required: Two empty memory DIMM positions.

For 7028-6E1: (#4121)

Minimum required: 0

Maximum allowed: 8 (Initial order maximum: 8)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)

This cable is required to connect displays with a 15-pin "D" shell
connector to the appropriate accelerator connector when it is farther
away than the attached monitor cable can reach. Rack mounted systems are
likely candidates for this extender cable.

Attributes provided: 6-foot extension cable

Attributes required: Supported monitor and adapter with a 15-pin "D"
shell connector.

(#4246) IDE 2-Drop Connector Cable

(No Longer Available as of December 10, 2004)

IDE Cable that connects the IDE controller on the planar to the IDE
CD-ROMs in the media bays.

Attributes provided: Connection between controller and media bays

Attributes required: None

For 7028-6E1: (#4246)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#4247) SCSI 2-Drop Cable: Integrated SCSI to SCSI Backplane and Bolt-in Disk

(No Longer Available as of December 10, 2004)

SCSI cable that connects the SCSI controller on the planar to the six
hot-swap SCSI disk drives and the bolt-in SCSI disk drive.

Attributes provided: Connection between controller and disk drives.

Attributes required:

For 7028-6E1: (#4247)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#4248) SCSI Connector Cable and Repeater Card

(No Longer Available as of December 10, 2004)

SCSI cable that connects the SCSI controller on the planar to the six
hot-swap disks and provides a repeater card, used with #4249, to connect
the media bays to the SCSI controller.

Attributes provided: Connection between controller and disk drives.
Repeater card.

Attributes required: None

For 7028-6E1: (#4248)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return Parts MES: No

(#4249) 3-Drop Cable: Backplane to Media Bays/Bolt-in Disk

(No Longer Available as of December 10, 2004)

SCSI cable that connects the repeater card (#4248) to the media bays
and the bolt-in SCSI disk drive.

Attributes provided: Connection between repeater card and media bays
and bolt-in DASD bay.

Attributes required: #4248

For 7028-6E1: (#4249)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return Parts MES: No

(#4258) SCSI Cable, PCI Adapter to Hot-Swap Disks

(No Longer Available as of December 10, 2004)

SCSI cable that connects a PCI adapter to the hot swap disks.

Attributes provided: Connection between adapter and hot swap disk
drives.

Attributes required: None

For 7028-6E1: (#4258)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX V4.3.3 or 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#4259) 3-Drop Cable: Integrated SCSI to Media Bays/Bolt-in Disk

(No Longer Available as of December 10, 2004)

SCSI cable that connects the SCSI controller on the planar to the
media bays and the bolt-in SCSI disk drive.

Attributes provided: Connection between controller, media bays, and
bolt-in SCSI disk drive.

Attributes required: None

For 7028-6E1: (#4259)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX V4.3.3 or 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#4353) H-100 Bus 8-position Cable

(No Longer Available as of December 10, 2004)

This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 8-position cable should be used when
more than four and less than or equal to eight adapters with H.100
connectors will be interconnected. If four or less adapters are
interconnected, the H.100 Bus 4-Drop Cable (#2877) should be used.

Attributes provided: H.100 bus connection between adapters

Attributes required: Four to eight H.100 adapters

For 7028-6E1: (#4353)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Requires feature code number 6310.

(#4953) IBM 64bit/66MHz PCI ATM 155 UTP Adapter

(No Longer Available as of December 17, 2004)

The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155
Mbps full-duplex connection to ATM networks over either permanent virtual
circuits (PVC) or switched virtual circuits (SVC). This adapter enables
TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair
(UTP). It also supports communication with devices located on an ATM
network or bridged to a Token-Ring, Ethernet, or other LAN.

Attributes provided: One ATM 155 UTP connector

Attributes required: One PCI slot

For 7028-6E1: (#4953)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and
AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD
LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.

Initial Order/MES/Both/Supported: Both

(#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter

The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to
ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155
Mbps full-duplex connection using permanent virtual circuits (PVC) or
switched virtual circuits (SVC) and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on
an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.

This 155 Mbps PCI MMF ATM Adapter is compatible with:

IBM 8285 ATM Workgroup Switch

IBM 8260 ATM Subsystem

IBM 8282 ATM Concentrator

IBM 8281 ATM LAN Bridge

Attributes provided: One ATM 155Mbps MMF connection

Attributes required: One PCI slot

For 7028-6E1: (#4957)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and
AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD
LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.

Initial Order/MES/Both/Supported: Both

(#4959) IBM Token-Ring PCI Adapter

The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short,
32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half-
duplex or full-duplex.

Automatic Ring-Speed selection prevents "wrong speed" insertion into
the ring, even when connected to speed-sensing hubs. This adapter will
operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45
connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin
D-shell connectors. The Token-Ring PCI Adapter will provide network boot
capability.

Attributes provided:

Attributes required: A single empty 32-bit PCI adapter slot.

For 7028-6E1: (#4959)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#4960) IBM e-business Cryptographic Accelerator

The IBM e-business Cryptographic Accelerator is a short form factor
PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure
Web transaction, SSL operations is a key requirement. To do this,
public-key cryptographic operations using SSL handshake protocol is
employed. The IBM e-business Cryptographic Accelerator is a hardware
cryptographic solution that off-loads this compute-intensive public-key
cryptographic processing from the host.

The overall operation control, including command decoding, is
implemented in hardware and requires no on-card microprocessor subsystem.
As such, the adapter is a less expensive alternative to those who do not
need the high security of the on-card secure programming environment such
as is offered by the PCI Cryptographic Coprocessor(#4958), but do need
the high cryptographic performance that hardware acceleration provides by
offloading the host processor.

Note: The IBM e-business Cryptographic Accelerator is only supported by
the industry standard PKCS #11 application programming interface (API)
Version 2.01, and applications which interface to the PKCS #11 Support
Program.

Attributes provided: Data encryption via PCI bus to host

Attributes required: 1 PCI slot

For 7028-6E1: (#4960)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#4961) IBM Universal 4-Port 10/100 Ethernet Adapter

IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long,
64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10
Base-T or 100 Base-T interfaces either half or full duplex. Each port is
provided with it's own RJ-45 connector for attachment to standard CAT-3/5
Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u
compatible and provides full auto-negotiation for detecting speed and
duplex capability across each port. Network boot capability and Network
Install Manager (NIM) capability are available using this adapter if no
specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet
Adapter (#4961) should be considered where maximum port density is
required per I/O card slot. But, for high end systems, where card slots
are not the limiting factor and maximum throughput is required, the
single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM
10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions.
Below are some performance factors to consider when choosing the right
adapter for your needs. These performance comparisons are based on all
four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961)
being active.

With all four ports under full bandwidth conditions, a single IBM
Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver
up to 3 times the comparable performance of a single IBM 10/100 Mbps
Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI
Adapter (#2968).

Under most conditions, each port of the IBM Universal 4-Port 10/100
Ethernet Adapter (#4961) is expected to perform at greater than 50% the
throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter
II (#4962) or the IBM 10/100 Mbps Eth PCI Adapter (#2968).

Note: The resulting performance in your environment compared to the above
may vary and depends upon the RS/6000 model, the I/O configuration, and
associated workload of your applications.

Attributes provided: 4 ports of 10/100 Base-Tx Ethernet

Attributes required: 1 PCI slot

For 7028-6E1: (#4961)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or
later, AIX 5.1 or later. Linux - Refer to the following URL for systems
and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

(#4962) 10/100 Mbps Ethernet PCI Adapter II

The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:

After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates) and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.

Note: This IP Security function is not supported with AIX 4.3 software.

Half / Full Duplex 10/100 Mbps Ethernet interface

10/100 Mbps data rates

Auto-negotiation for 10/100 speed and half/full duplex

Network boot capability and Network Install Manager (NIM)

IEEE 802.3 Ethernet Specification

IEEE 802.3u Fast Ethernet Specification

802.3x Ethernet flow control support

Attributes provided: One 10/100 Mbps Ethernet port (connector)

Attributes required: One PCI slot

For 7028-6E1: (#4962)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and
AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD
LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later. Linux - Refer to
the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both of these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.

(#4963) PCI Cryptographic Coprocessor (FIPS-4)

(No Longer Available as of February 8, 2005)

The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter
which combines hardware and software to provide a wide variety of
security services. The PCI Cryptographic Coprocessor (FIPS-4) is a
second generation adapter of the Cryptographic Coprocessor family that
provides high performance secure hardware engines for secure internet
transactions such as transmitting data, verifying electronic signatures,
bulk data encryption and decryption. In addition, the card is enclosed
in a tamper proof enclosure to restrict access to on card resources,
designed to FIPS 140-1 Level 4 standards.

Security functions supported by the adapter include:

DES (Data Encryption Standard) (40 and 56 bit key) encryption and
decryption, with pre-and post-padding; the coprocessor uses both ECB
(electronic and codebook) and CBC (cipher block chain) modes of
encryption.

MAC (Message Authentication) generation and MAC verification services

Triple DES (three key) encryption and decryption of eight-byte units

Secure RSA key-pair generation

RSA signature generation and signature verification at 18
signatures/sec at 2048 bits

Hardware random number generation

Secure data storage and retrieval

Other non-cryptographic security utilities can be carried out using
the onboard processor

As part of this adapter's physical security features, the following
events will cause an adapter shutdown and secure data zeroization.

Shipping/Storage Temperature less than -15C or greater than 95C

Dead Battery (VBAT less than 2.4V)

Supply Voltage greater than 3.3V/12V max

Mesh Sensor opens/shorts detection

X-ray exposure

IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for download
from the http://www.ibm.com/security/cryptocards website:

PKCS #11 Version 2.01, an implementation of the industry-standard API

IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.

Under custom contract, IBM also offers toolkits that you can employ to
develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and cryptographic
hardware. For more information on custom contracts, refer to web site
http://www.ibm.com/security/cryptocards.

For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:

http://www.ibm.com/security/cryptocards

Limitations:

The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.

Attributes provided: Data encryption via PCI bus to host

Attributes required: 1 PCI slot

For 7028-6E1: (#4963)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#4964) PCI Cryptographic Coprocessor

The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter
combining hardware and software designed to provide high performance
hardware engines for secure internet transactions such as data exchange,
verifying electronic signatures, bulk data encryption and decryption.
Cryptographic processes are performed within a tamper resistant
enclosure on the adapter that is designed to meet FIPS PUB 140-1
standard for commercial cryptographic devices at Level 3.

Security functions supported by the adapter includes:

Data Encryption Standard (DES) (56 and 40 bit keys) encryption and
decryption, with pre- and post-padding; the coprocessor uses both
electronic and codebook (ECB) and cipher block chain (CBC) modes of
encryption.

Message Authentication (MAC) and financial PIN processing

Triple DES encryption and decryption of general data

RSA key-pair generation

RSA signature generation and signature verification

Secure Hashing Algorithm (SHA-1) in hardware

Hardware random number generation

Protected data storage and retrieval

Other non-cryptographic security utilities can be carried out
using the onboard processor

IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for
download from:

http://www.ibm.com/security/cryptocards

PKCS #11 Version 2.01, an implementation of the industry-standard
API

IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.

Under custom contract, IBM also offers toolkits that you can employ
to develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and
cryptographic hardware. For more information on custom contracts,
refer to:

http://www.ibm.com/security/cryptocards.

For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:

http://www.ibm.com/security/cryptocards

Limitations:

The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.

Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:

http://www.ibm.com/servers/aix/os/adapters/51.html

Attributes provided: Data encryption via PCI bus to host

Attributes required: 1 PCI slot

For 7028-6E1: (#4964)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2 )

OS level required: AIX V4.3.3 or 5.1 or later.
For Linux informaion, refer to:

http://www.ibm.com/servers/eservers/pseries/hardware/
factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#5001) Customer Service Specify

This feature code specifies that the system will receive special
request services from the Center for Customer Services (CCS) in
Rochester.

Attributes provided: Customization

Attributes required: None

For 7028-6E1: (#5001)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#5005) Software Preinstall

Licensed programs may be preinstalled on the media selected. To order
this option, specify code (#5005) on the initial system order. The
preinstalled licensed programs will be at the same release level as
programs being shipped from the Program Libraries at the time the system
is manufactured.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#5005)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

(#5300) 1-Way 375MHz POWER3-II Processor Card

(No Longer Available as of December 10, 2004)

1-way processor card with 375 MHz POWER3-II processor and 4 MB of L2
cache.

Attributes provided: 1-way processor

Attributes required: 1 processor card slot

For 7028-6E1: (#5300)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#5309) 1-way 450MHz POWER3-II Processor Card

(No Longer Available as of December 10, 2004)

1-Way processor card with 450 MHz POWER3-II processor with 8MB of L2
cache.

Attributes provided: 1-way processor

Attributes required: 1 processor card slot

For 7028-6E1: (#5309)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#5322) 1-Way 333MHz POWER3-II Processor Card

(No Longer Available as of December 10, 2004)

1-way processor card with 333 MHz POWER3-II processor and 4 MB of L2
cache.

Attributes provided: 1-way processor

Attributes required: 1 processor card slot

For 7028-6E1: (#5322)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX V4.3.3 or 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter

The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5-micron
Multi Mode Fiber (MMF) and 550m for 50.0-micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.

Note: For optimum performance, the adapter should be placed in a 64-bit
PCI-X card slot.

Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5-Micron Fiber Converter Cable (#2459) or LC-SC
50-Micron Fiber Converter Cable (#2456) is required.

Limitation: Half-Duplex (HDX) mode is not supported.

Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.

Attributes required: One available PCI or PCI-X card slot

For 7028-6E1: (#5700)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX
5.2 with the 12/2002 or later Update CD. Linux - Refer to the following
URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.

Note: For optimum performance, adapter should be placed in a 64-bit PCI-X
card slot.

Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.

Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.

Attributes required: One available PCI or PCI-X card slot

For 7028-6E1: (#5701)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX
5.2 with the 12/2002 or later Update CD. Linux - Refer to the following
URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter

The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit
3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing
RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI
physical disk drives on two independent SCSI buses.

To increase the data writing performance, a 40 MByte fast-write cache
is provided as a resident part of this adapter. The 40 MByte fast-write
cache is resident on the Dual Channel Ultra320 SCSI RAID Adapter and
utilizes non-volatile RAM. The 40 MByte fast-write cache can provide an
significant improvement in data throughput and response time during
certain sequence write operations compared to SCSI RAID adapters without
the fast-write cache. The response time and data transfer improvement
will vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.

The Dual Channel Ultra320 SCSI RAID Adapter has two independent
ultra320 SCSI buses. There are two internal ports and two external
ports. The two internal ports are shared with the two external ports.
The SCSI busses can drive either an internal port or an external port.
The internal ports can be used to provide an internal RAID solution on
certain supporting pSeries systems with internal multiple disk drives or
packs of drives. Internally attached Ultra320 devices are designed to
run at a data rate of up to 320 MB per second on systems that have
internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.

When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or external ports) are required to be formatted to 522 byte
sectors. 522 byte sectors provide additional CRC error checking for
improved data integrety. A menu option is provided in the AIX supporting
software which will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array, a similar
menu option is also provided to re-format them back to 512 byte sectors.

Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors.

Also, there are some disk drives which do not support being formatted
to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the
user of these known situations when they exist. For disk microcode
updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI RAID Adapter.

The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate configured as either a non-array or
an array of disks. Also the two external ports provide non-array
connectivity to numerous other SCSI external subsystems. Check the
external subsystem sales/web pages for verification of connectivity
support with this adapter.

Limitations:

The two external ports provide connectivity to an IBM 2104-DU3
Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower
at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only
non-array configuration support.

The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.

Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.

Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following web page
URL:

http://techsupport.services.ibm.com/server/mdownload/

Attributes provided: Attachment of internal and external SCSI
devices

Attributes required: One PCI or PCI-X bus slot

For 7028-6E1: (#5703)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: If Feature Number 9556 or Feature Number 6556 is not installed in
the system, the Maximum Allowed and Inital order maximum is 4.

(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a
Full-Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.

A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For
optimum performance, the adapter should be placed in a 64 bit PCI-X card
slot whenever possible.

Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.

Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).

Attributes required: One available PCI or PCI-X card slot

For 7028-6E1: (#5706)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: For optimum 2-Port Gigabit Ethernet PCI-X Adapter performance,
systems manufactured prior to December 6, 2002 may require a system
firmware update. Check the following Web URL after December 6, 2002 to
review and download latest firmware if needed.

http://www.austin.ibm.com/support/micro/

If Feature Number 9556 or Feature Number 6556 is not installed in the
system, the Maximum Allowed and Inital order maximum is 4.

(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter

The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.

A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.

The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution. Note: For optimum
performance, the adapter should be placed in a 64 bit PCI-X card slot
whenever possible.

Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.

Limitation: Half-Duplex (HDX) mode is not supported.

Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).

Attributes required: One available PCI or PCI-X card slot

For 7028-6E1: (#5707)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: For optimum 2-Port Gigabit Ethernet PCI-X Adapter performance,
systems manufactured prior to December 6, 2002 may require a system
firmware update. Check the following Web URL after December 6, 2002 to
review and download latest firmware if needed.

http://www.austin.ibm.com/support/micro/

If Feature Number 9556 or Feature Number 6556 is not installed in the
system, the Maximum Allowed and Inital order maximum is 4.

(#5712) PCI-X Dual Channel Ultra320 SCSI Adapter

The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3
volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two
SCSI channels (busses), each capable of running 320 MBps (max.), up to
twice the maximum data transfer rate of the previous Dual Channel Ultra3
SCSI adapter (160 MBps). Each SCSI bus can either be internal (on
systems that support internal SCSI device or backplane attachments) or
external. Internally attached Ultra320 devices can run at a data rate of
up to 320 MB per second on systems that have internal backplanes that are
capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.

Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI Adapter.

The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate. The two external ports also
provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1
Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also
the two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.

The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot
adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or
RS/6000 systems. The adapter also supports target mode.

Limitations:

The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.

Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.

Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following web page
URL:

http://techsupport.services.ibm.com/server/mdownload/

Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices

Attributes required: One available 3.3 volt PCI or PCI-X slot

For 7028-6E1: (#5712)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: If Feature Number 9556 or Feature Number 6556 is not installed in
the system, the Maximum Allowed and Inital order maximum is 4.

(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology

The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and achieve functions. This tape drive uses
VXAtape** data cartridges and is compression capable, providing a
capacity of up to 160 GB - a significant increase in capacity over the
previous internal tape drives.

Characteristics:

Capacity: 80 GB native mode, 160 GB (typical) compression mode

Form Factor: 5.25-inch half high

Media: uses VXAtape data cartridges

Technology: Helical scan, rotating head

Operation: Streaming

Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression

Interface: SCSI-2 (LVD/SE) asynchronous/synchronous

Compatability: 80 GB mode (Read/Write), 160 GB compression
(Read/Write)

Attributes provided: One 80/160 GB internal tape drive

Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address

For 7028-6E1: (#6120)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or
later. Linux - Refer to the following URL for systems and features that
operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#6134) 60/150 GB 16-bit 8mm Internal Tape Drive

(No Longer Available as of March 31, 2005)

The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch
half-high, 16-bit tape drive. This drive provides a high capacity tape
drive for save/restore and archiving functions. This tape drive uses IBM
8mm data cartridges and is compression capable, providing a capacity of
up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm
internal tape drive.

Characteristics:

Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode

Form Factor: 5.25-inch Half-high

Media: IBM 8mm Data Cartridge with Smart Clean Technology

Technology: Helical Scan, Rotating Head

Operation: Streaming

Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical)
Compression M

Interface: SCSI-2 16-bit Low Voltage Differential(LVD) /
Single-ended (SE) Asynchronous/Synchronous

Compatibility: See the following Technical Support Web page (8mm
Tape Interchange Information section) for compatability information:

http://techsupport.services.ibm.com/server/mdownload/tapewhdr.html

Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive

Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal 16-bit address

For 7028-6E1: (#6134)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or
later. Linux - Refer to the following URL for systems and features that
operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#6156) 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)

(No Longer Available as of December 6, 2002)

This feature consists of a 5.25-inch half-high, single-ended, 16-bit
tape drive. This drive provides a high capacity tape drive for
save/restore and archiving functions. This tape drive uses IBM 8mm data
cartridges and is compression capable, providing a capacity of up to 40
GB -- a 400% increase over the previous 5/10 GB 8mm internal tape drive.
(Black bezel)

Characteristics:

Capacity: 20.0 GB Native Mode, 40.0 GB (typical) Compression Mode

Form Factor: 5.25-inch Half-high

Media: IBM 8mm Data Cartridge

Technology: Helical Scan, Rotating Head

Operation: Streaming

Data Transfer Rate: 3MB/Sec. Native Mode, 6MB/Sec. (typical)
Compression M

Interface: SCSI-2 16-bit (Single-ended) Asynchronous/Synchronous

Compatibility: 2.3 GB Mode (Read only), 2.3 GB mode with Compression
(Read only), 5 GB Mode (Read only), 5 GB Compression (Read only), 7 GB
Mode (Read only), 7 GB Compression (Read only), 20 GB Mode (R/W), 20 GB
Compression (R/W).

Attributes provided: 8mm tape capability

Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address

For 7028-6E1: (#6156)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#6158) 20/40GB 4mm Internal Tape Drive

The 20/40 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high,
single-ended 16-bit tape drive, which provides a high capacity for
save/restore and achieve functions. This tape drive uses IBM 4-mm data
cartridges and is compression capable, providing a capacity of up to 40
GB - a significant increase in capacity over the previous 12/24 4-mm
internal tape drives (when using DDS-4 media).

Characteristics:

Capacity: 20 GB native mode, 40 GB (typical) compression mode

Form Factor: 5.25-inch half high

Media: IBM 4-mm DDS-4 data cartridge

Technology: Helical scan, rotating head

Operation: Streaming

Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression

Interface: SCSI-2 (single ended) asynchronous/synchronous

Compatibility: 4 GB mode (Read/Write), 8 GB compression
(Read/Write); 12 GB mode(Read/Write), 24 GB compression (Read/Write), 20
GB mode (Read/Write), 40 GB compression (Read/Write).

Note: MES orders are shipped with both a black and a white bezel.

Attributes provided: 4mm tape capability

Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address

For 7028-6E1: (#6158)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

(#6166) Acoustic Package for Deskside/Desktop Systems

(No Longer Available as of December 10, 2004)

This feature provides an acoustic package consisting of a rear
muffler, rear fan, hot-swap DASD disk array baffle, and mounting
hardware. When installed it will enable deskside/desktop systems to
attain "Quiet Office" standards.

Attributes provided: Acoustic package

Attributes required: Supported system

For 7028-6E1: (#6166)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#6203) PCI Dual Channel Ultra3 SCSI Adapter

(No Longer Available as of December 10, 2004)

The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64-bit adapter
and is an excellent solution for high-performance SCSI applications. The
PCI Dual Channel Ultra3 SCSI Adapter provides two SCSI channels (busses).
Each SCSI bus can either be internal (on systems that support internal
SCSI device or backplane attachments) or external and will support a data
rate of up to 160 MBytes per second, up to twice the maximum data
transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes
per second).

In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes
per second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this Ultra3 160 MBytes per second performance, all attaching
devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2
and Ultra3 devices coexist on the same bus, each device will operate at
its rated speed. For lower speed single-ended (SE) devices, the SCSI bus
will switch to single-ended (SE) performance and interface at the lower
SE bus data rate of the device.

Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE subsystems to allow
connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI
Adapter.

Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI port will auto-throttle to a "Fast"
interface speed running no faster than 20MB/s maximum. This auto-
throttle function is performed to ensure best signal quality between host
adapter and attaching subsystem. The second external port is unaffected
unless a SE subsystem is also attached to it. If so, it would also auto-
throttle as described above.

The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot
adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the
supported pSeries or RS/6000 systems.

Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices

Attributes required: One available PCI slot

For 7028-6E1: (#6203)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or
later, AIX 5.1 with Update CD LCD4-1103-01 or later. Linux - Refer to
the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

(#6204) PCI Universal Differential Ultra SCSI Adapter

(No Longer Available as of Decenber 30, 2005)

The PCI Universal Differential Ultra SCSI Adapter is the latest
technology advancement of an RS/6000 SCSI-2 differential adapter with a
maximum data transfer rates of 40 MBytes per second. This adapter has
the capability to be plugged into the newer +3.3 volt PCI slots as well
as the older +5 volt PCI slots. Feature code # 6204 allows connection to
external differential SCSI-2 F/W or Ultra SCSI type devices up to 25
meters away. Feature code # 6204 will negotiate with each external
device and transfer data at the fastest SCSI data transfer rate capable
by the external device. Check system sales pages as to which external
differential subsystems are supported.

The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra)
documentation. Industry standard 68 pin connectors are incorporated
(SCSI "P" connector definition of X3T9.2/90-048).

Attributes provided: 15 external SCSI-2 addresses

Attributes required: 1 PCI slot.

For 7028-6E1: (#6204)

Minimum required: 0

Maximum allowed: 5 (Initial order maximum: 5)

OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both

(#6206) PCI Single-Ended Ultra SCSI Adapter

(No Longer Available as of December 10, 2004)

The PCI Single-Ended Ultra SCSI Adapter (#6206) is an ideal solution
for applications requiring large block data transfers (more than 64K
block size) in a multi disk drive environment utilizing SCSI-2 protocol.
FC #6206 has a maximum data transfer rate of 40 MBytes per second which
is twice the maximum data transfer rate of SCSI-2 Fast/Wide adapters (20
MBytes per second).

The PCI Single-Ended Ultra SCSI Adapter (#6206) conforms to the SCSI-2
standard and Fast-20 (Ultra) documentation. Industry standard 68 pin
connectors are incorporated (SCSI "P" connector definition of
X3T9.2/90-048).

Note: If any Single Ended (SE) SCSI subsystem is attached to the external
port of this adapter, the SCSI ports (both external and internal) will
auto-throttle to a "Fast" interface speed running no faster than 20MB/s
max. This auto-throttle function is performed to ensure best signal
quality between host adapter and attaching subsystem.

Limitation: Attachment of the IBM 2104 models DL1, TL1, DU3, or TU3
external disk subsystems to the external connector of this SCSI adapter
is not supported when any device(s) are attached to the internal
connector of the same adapter.

Attributes provided: 15 internal or 15 external SCSI-2 addresses

Attributes required: 1 PCI slot.

For 7028-6E1: (#6206)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or 5.1, or later

Initial Order/MES/Both/Supported: Both

(#6228) Gigabit Fibre Channel Adapter for 64-bit PCI Bus

(No Longer Available as of December 10, 2004)

The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a 64-bit
address/data, short form factor PCI adapter with LC type external fiber
connectors that provides single or dual initiator capability over an
optical fiber link or loop. With the use of appropriate optical fiber
cabling, this adapter provides the capability for a network of high speed
local and remote located storage. The 2 Gigabit Fibre Channel Adapter
for 64-bit PCI Bus will auto-negotiate for the highest data rate (either
1Gps or 2Gps) of which the device or switch is capable. Distances of up
to 500 meters running at 1Gbps data rate and up to 300 meters running at
2Gbps data rate are supported between the adapter and an attaching device
or switch. When used with IBM supported Fibre Channel storage switches
supporting long-wave optics, distances of up to 10 kilometers are capable
running at either 1Gps or 2Gps data rates.

The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be used to
attach devices either directly, or by means of Fibre Channel Switches.
If attaching a device or switch with a SC type fiber connector(s), use of
an LC-SC Fibre Channel Conversion Cable (#2456) is required.

Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.

Attributes provided: 1 FC/FC-AL interface

Attributes required: 1 empty PCI slot

For 7028-6E1 (#6228):

Minimum required: 0

Maximum allowed: 2 (Initial Order Maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: MES

Fibre Channel boot capability is supported on this system with this
adapter provided your system firmware and adapter firmware are at the
proper support levels. Systems manufactured prior to November 30, 2001
may require a system and adapter firmware update. Check the following
web URL to review and download latest firmware if needed.

http://www.austin.ibm.com/support/micro

Note: Fibre Channel boot also requires AIX 4.3.3 or AIX 5.1 at the
September, 2001 maintenance level or later along with a disk subsystem on
which this boot capability has been qualified.

(#6230) Advanced SerialRAID Plus Adapter

(No Longer Available as of June 24, 2005)

The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop)
Serial Storage Architecture (SSA) adapter providing an instantaneous data
transfer rate of up to 160 MByte/s per loop. It also provides eight-
initiator, non-RAID capability, two-initiator RAID 1, two-initiator RAID
0 + 1, two-initiator RAID 5, or one-initiator RAID 0 capability. The
adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that
improves write performance in RAID 0+1, RAID 5, and non-RAID
applications. When the 32 MByte Fast-Write Cache Option Card is used,
the adapter can be configured in either single or dual initiator fast-
write cache mode. In dual initiator fast-write cache mode, if one of the
two adapters fail, the failing adapter is designed to transfer control
over to the other. Also, in dual initiator Fast Write Cache mode, the
128 MByte DRAM Option Card (#6231) is available and required to utilize
the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte
DRAM Option Card is not used in dual initiator fast-write cache mode, the
effective fast-write cache capacity will be 16 MBytes on each adapter.
See the 128 MByte DRAM Option Card (#6231) for information.

The Advanced SerialRAID Plus Adapter when operated in a RAID 5
configuration will support (2+P) to (15+P) arrays and up to 6 (15+P)
arrays. When operated in a RAID 1 or RAID 0+1 configuration, will
support up to eight disk drives mirrored. The adapter also supports Hot
Spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter
also supports connectivity to external disk enclosures and internal
RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also
supported (Refer to IBM 7133 Sales literature for additional information)

Any supported RS/6000 system can be set up to boot from an Advanced
SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included
as part of the configuration. Other disks associated with the adapter
can be RAID but at least one disk must be a non-RAID SSA disk. The
non-RAID SSA disk can be located under the covers of a processor unit or
in an external SSA storage unit. If your system is running with AIX
4.3.3 or later software, native boot capability is supported. For
factory system orders with AIX preload requested, an internal SCSI disk
drive will be preloaded as the native boot disk even if internal SSA disk
drive(s) are present. If your system is running with AIX 4.2.1 or AIX
4.3.2 software, the below procedure applies in order to boot using the
Advanced SerialRAID Plus Adapter:

The non-RAID SSA disk can be located under the covers of a processor
unit or in an external SSA storage unit.

A supported AIX version of software (with proper updates) must be
loaded to the non-RAID SSA disk using AIX's Network Install Manager
(NIM) before booting from the non-RAID disk.

The system with a non-RAID SSA disk must have a network connection
with another RS/6000 system performing the NIM Master function to perform
the install. On RS/6000 SP systems, a similar network install is
performed from a control workstation.

Once AIX with updates is installed on the non-RAID SSA disk and the
system is configured for booting, booting will take place from the boot
disk without any support from the control processor or NIM Master and the
system does not have to be connected to the network at boot time.

A 3-Way Copy Function allows a user to create a third copy to an
existing RAID-1 or RAID 0+1 array while mirrored operation continues.
3-Way Copy allows the user, at any time after the copy process has
completed, to split the third copy off from the original RAID-1 or RAID
0+1 array to form an independent RAID copy. This third copy or
"snapshot" copy could be typically used to perform a backup or to test
some new application. The 3-Way Copy Function is available only via a
code download and can only be gained by going to the SSA web support
pages defined below.

When performing SSA device or subsystem planning, installation,
upgrades, or preventive maintenance, refer to the following Web support
pages. They provide access to the latest SSA publications and support
code for the system, SSA adapters, and SSA subsystems. These sites
should also be considered during system hardware and/or operating system
upgrades if SSA devices are included in the system.

http://www.storage.ibm.com/hardsoft/products/ssa/

The above link contains links to SSA publications and other SSA Web
sites, including the one below.

http://www.storage.ibm.com/hardsoft/products/ssa/rs6k/index.html

The above link contains lists of the latest SSA support code and
provides code download capability for the RS/6000 and AIX environments.

LIMITATION: Internal ports on the adapter are not supported. See
machine/model specific information to determine if internal SSA disk
drives and associated hardware/cables are supported.

Attributes provided: Attachment of SSA devices

Attributes required: One PCI bus slot

For 7028-6E1: (#6230)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#6231) 128 MByte DRAM Option Card

(No Longer Available as of June 24, 2005)

The 128 MByte DRAM Option Card (#6231) is a field only optional
feature to the Advanced SerialRAID Adapter (#6225) or a factory or field
option for the Advanced SerialRAID Plus Adapter (#6230). This option is
recommended for dual initiator fail-over Fast Write Cache (FWC)
configurations. The option increases the existing DRAM on the adapter to
128 MBytes. In this type of dual initiator FWC configuration, the
existing DRAM does not have enough capacity to completely contain a copy
of each adapter's 32 MByte FWC and also provide additional working space.
The 128 MByte DRAM Option Card provides this additional space needed to
contain a full copy of each adapters 32 MByte FWC content and allows for
full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card
(#6231) is not used with dual-initiator FWC configurations, the effective
FWC capacity is reduced to 16 MBytes per adapter.

If this feature is ordered as a field upgrade to an existing
SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software
and publications are also provided.

Attributes provided: 128 MByte DRAM memory

Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced
SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card
(#6235) is also recommended.

For 7028-6E1: (#6231)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#6235) 32 MByte Fast-Write Cache Option Card

(No Longer Available as of June 24, 2005)

The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast-
write optional feature that plugs into the IBM RS/6000 Advanced
SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus
(#6230). It utilizes non-volatile RAM. During the unlikely event of an
Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID
Adapter can be installed and the fast-write cache can be removed from the
failing adapter and installed in the new adapter insuring data integrity.
The 32 MByte Fast-Write Cache Option Card can provide a significant
improvement of data throughput and response time during certain sequence
write operations compared to SSA RAID adapters without the fast-write
cache. The response time and data transfer improvement using the
optional card will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters. The 32 MByte Fast-Write Cache Option Card plugged into the
Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or
RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write
Cache Option Card plugged into the Advanced SerialRAID Plus Adapter
(#6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single-
initiator or dual initiator configurations.

Attributes provided: None

Attributes required: One Advanced SerialRAID Adapter (#6225) or
Advanced SerialRAID Plus Adapter (#6230).

For 7028-6E1: (#6235)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#6239) 2 Gigabit Fibre Channel PCI-X Adapter

(No Longer Available as of December 30, 2005)

The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gbps or 2 Gbps data rates.

The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber onnector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.

Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.

Attributes provided: 1 Fibre Channel/FC-AL interface

Attributes required: 1 empty PCI or PCI-X slot

For 7028-6E1: (#6239)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: MES

CSU: Yes

Return parts MES: No

Note: Fibre Channel boot capability is supported on this system with this
adapter provided your system firmware is at the proper support level.
Systems manufactured prior to November 30, 2001, may require a system
firmware update. Check the following Web URL to review and download
latest firmware if needed.

http://www.austin.ibm.com/support/micro/

Note: Fibre Channel boot requires AIX 5.1 at the September, 2001,
maintenance level or later along with a disk subsystem on which this boot
capability has been qualified.

(#6275) Power Supply, 250 Watt AC, Hot-swap, Redundant

(No Longer Available as of December 10, 2004)

This feature provides a 250 watt AC power supply for redundant power.

Attributes provided: 250 Watt AC Redundant Power Supply

Attributes required: Available Power Supply Bay

For 7028-6E1: (#6275)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX V4.3.3 or 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#6277) Power Supply, 250 Watt AC, Hot-swap, Base

(No Longer Available as of December 10, 2004)

This feature provides a 250 watt AC power supply.

Attributes provided: 250 Watt AC Power Supply

Attributes required: Available Power Supply Bay

For 7028-6E1: (#6277)

Minimum required: 2

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX V4.3.3 or 5.1, or later

Initial Order/MES/Both/Supported: Initial

(#6310) IBM ARTIC960RxD Quad Digital Trunk PCI Adapter

(No Longer Available as of June 25, 2004)

Provides voice processing for up to four T1 or E1 digital trunks,
providing connectivity for 96 (T1) or 120 (E1) voice channels in a single
PCI slot. The voice processing function is provided by Voice Response
for AIX LPP. Several network attachment cables are available in support
of this adapter and the correct cable should be selected for either T1 or
E1networks. (Select from cable features: 2709 (T1,RJ-45), 2710 (E1,
RJ-45), 2871/2872 (T1, 100 ohm), 2873/2874 (E1, 120 ohm).

Note: When more than one IBM ARTIC960RxD Quad Digital Trunk PCI
Adapter (#6310) is ordered, the Artic960RxD Quad DTA, H.100, 4-drop Cable
(#2877) is required.

Note: When a Digital Trunk Quad PCI adapter (#6309) is already
present and an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is
ordered, an IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and
IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879)
are required.

Note: When an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310)
is ordered and an IBM ARTIC960RxD DSP Resource PCI Adapter (#2949) is
already present, the IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable
(#2878) and the IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter
Cable (#2879) are required.

Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:

http://www.ibm.com/servers/aix/os/adapters/51.html

Attributes provided: Connection of 1 to 4 T1/E1 Trunks

Attributes required: Available PCI slot, appropriate cables and
WebSphere Voice Response for AIX LPP application software.

For 7028-6E1: (#6310)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#6566) Mounting Hardware for Disk in Media Bay

(No Longer Available as of December 10, 2004)

This feature code will provide the mounting hardware and external
filler needed to mount any valid disk drive in an available media bay.

Attributes provided: Mounting of a valid disk drive in a media bay.

Attributes required: 1 empty media drive bay

For 7028-6E1: (#6566)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#6567) Ultra3 SCSI Backplane for Hot-swap Disks

(No Longer Available as of December 10, 2004)

This feature provides a backplane that allows the installation of hot-
swap disks in the system.

Attributes provided: Ultra3 SCSI Backplane

Attributes required:

For 7028-6E1: (#6567)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX V4.3.3 or 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#7305) AAP Software Pre-Install Indicator

Software pre-install indicator for Authorized Assemblers

Attributes provided: Software Preinstall

Attributes required: Authorized Assembler Order

For 7028-6E1: (#7305)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

(#7779) OEM Publications for IBM Logo Product

This feature provides OEM publications with a product shipping with
IBM nomenclature.

Attributes provided: OEM Publications

Attributes required: None

For 7028-6E1: (#7779)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

(#8091) 1-way 450MHz POWER3-II Processor Card, Express Configurations, Factory Only

(No Longer Available as of March 9, 2004)

Provides a 1-way processor card with 450 MHz POWER3-II processor, with
8MB of L2 cache for systems being included in Express Configurations.
Equivalent to #5309.

Attributes provided: 1-way processor equivalent to #5309.

Attributes required: 1 processor card slot.

For 7028-6E1: (#8091)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

Note: If #8096 is ordered, Minimum Required must equal 1.

(#8092) 1-way 450MHz POWER3-II Processor Card, Express Configurations, Factory Only

(No Longer Available as of March 9, 2004)

Provides a 1-way processor card with 450 MHz POWER3-II processor, with
8MB of L2 cache for systems being included in Express Configurations.
Equivalent to #5309.

Attributes provided: 1-way processor equivalent to #5309.

Attributes required: 1 processor card slot.

For 7028-6E1: (#8092)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

Note: If #8097 or #8098 is selected, Minimum Required must equal 2.

(#8093) 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only

(No Longer Available as of March 9, 2004)

Provides 1024MB of system memory with 2 512MB DIMMs for systems being
included in Express Configurations. Equivalent to #4121.

Attributes provided: 1024MB of system memory equivalent to #4121.

Attributes required: Two empty memory DIMM positions.

For 7028-6E1: (#8093)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

Note: If #8096 is selected, Minimum Required must equal 1.

(#8094) 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only

(No Longer Available as of March 9, 2004)

Provides 1024MB of system memory with 2 512MB DIMMs for systems being
included in Express Configurations. Equivalent to #4121.

Attributes provided: 1024MB of system memory equivalent to #4121.

Attributes required: Two empty memory DIMM positions.

For 7028-6E1: (#8094)

Minimum required: 0

Maximum allowed: 2 (Initial order maximum: 2)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

Note: If #8097 or #8099 is selected, Minimum Required must equal 2.

(#8095) 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only

(No Longer Available as of March 9, 2004)

Provides 1024MB of system memory with 2 512MB DIMMs for systems being
included in Express Configurations. Equivalent to #4121.

Attributes provided: 1024MB of system memory equivalent to #4121.

Attributes required: Two empty memory DIMM positions.

For 7028-6E1: (#8095)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

Note: If #8098 is selected, Minimum Required must equal 4.

(#8096) Express Configuration -- pSeries 610 (100C/100E)

(No Longer Available as of March 9, 2004)

Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of:

1 x #8091 (1-way 450 MHz POWER3-II processor)

1 x #8093 (1024MB memory DIMMs)

1 x #3264 (36.4GB hot-swap disk drive)

1 x #6275 (Redundant power supply)

Attributes provided: None

Attributes required: None

For 7028-6E1: (#8096)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

(#8097) Express Configuration -- pSeries 610 (200C/200E)

(No Longer Available as of March 9, 2004)

Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of:

2 x #8092 (1-way 450 MHz POWER3-II processor)

2 x #8094 (1024MB memory DIMMs)

2 x #3264 (36.4GB hot-swap disk drive)

1 x #6275 (Redundant power supply)

Attributes provided: None

Attributes required: None

For 7028-6E1: (#8097)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

(#8098) Express Configuration -- pSeries 610 (250C/250E)

(No Longer Available as of March 9, 2004)

Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of:

2 x #8092 (1-way 450 MHz POWER3-II processor)

4 x #8095 (1024MB memory DIMMs)

2 x #3265 (73.4GB hot-swap disk drive)

1 x #6275 (Redundant power supply)

Attributes provided: None

Attributes required: None

For 7028-6E1: (#8098)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

(#8099) Express Configuration -- pSeries 610 (125C/125E) RAID Applications

(No Longer Available as of March 9, 2004)

Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of:

1 x #8091 (1-way 450 MHz POWER3-II processor)

2 x #8094 (1024MB memory DIMMs)

1 x #3119 (36.4GB disk drive)

6 x #3264 (36.4GB hot-swap disk drive)

1 x #6275 (Redundant power supply)

1 x #2498 (Ultra3 SCSI RAID Adapter)

Attributes provided: None

Attributes required: None

For 7028-6E1: (#8099)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Initial

CSU: Does not apply

Return parts MES: Does not apply

(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter

This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.

Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN

Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.

For 7028-6E1: (#8131)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)

This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.

Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN

Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.

For 7028-6E1: (#8132)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8133) RJ-45 to DB-25 Converter Cable

This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.

Attributes provided: 4 DB-25 EIA-232 ports

Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)

For 7028-6E1: (#8133)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232

The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a
modified version of the existing 16-port Remote Async Node (feature #8130
or 8134) in an industry-standard 19-inch rack mount chassis to allow
simpler installation and ease-of-use. Like the existing RAN, it can also
be configured as a desktop device.

As an additional benefit, the metal chassis meets FCC Class B/CISPR B
when used with similarly rated RS/6000 host to meet the needs of
customers with these requirements.

The RANs provide 16 ports of EIA-232 capability with full modem
controls on each port and are connected to the 128-port Async Controller
(Micro Channel or ISA versions) residing in the host. RANs are connected
in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either
version).

The rack-mountable RAN offers these enhanced features:

Industry-standard 19-inch rack mountable chassis (can be configured
for stacking on a desktop or mounted in a 19-inch rack).

Meets FCC Class B/CISPR B when used with similarly rated RS/6000
host.

All RJ-45 connectors are now on the front panel, greatly enhancing
cable management.

The DB-15 synchronous connectors (cabling from host to RAN and
between RANs) and the power cord and switch are located on the rear
panel.

Power supply is self contained within the unit.

The rack-mountable RAN offers these same features as the existing RAN
product:

Identical function and support as existing 16-port Remote Async Node
(RAN), feature #8130 or 8134.

Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel or ISA host adapter.

Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.

Built-in diagnostics can test ports independent of RS/6000 host.

Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.

The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.

Individual ports support a maximum EIA-232 distance of 62 meters (200
feet).

Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer-supplied cables.

Location of RAN up to 330 meters from the host using standard
shielded 8-wire twisted pair cabling.

Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.

Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN
connection

Attributes required: 1 RAN-to-128-port Controller connection OR 1
RAN-to-RAN connection

For 7028-6E1: (#8136)

Minimum required: 0

Maximum allowed: 40 (Initial order maximum: 40)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

Note: Maximum of 8 per #2944 -- 128-port asynch adapter.

(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232

Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.

Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.

Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.

Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.

Built-in diagnostics can test ports independent of RS/6000 host.

Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.

The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.

Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.

Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.

Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.

Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.

Attributes provided: 16 EIA-232 Async ports

Attributes required: One 128-port adapter per eight (#8137s)

For 7028-6E1: (#8137)

Minimum required: 0

Maximum allowed: No max (Initial order maximum: No max)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8700) Quiet Touch Keyboard - Business Black, US English, #103P

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8700)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8701) Quiet Touch Keyboard - Business Black, French, #189

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8701)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8702) Quiet Touch Keyboard - Business Black, Italian, #142

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8702)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8703) Quiet Touch Keyboard - Business Black, German/Austrian, #129

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8703)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8704) Quiet Touch Keyboard - Business Black, UK English, #166

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8704)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8705) Quiet Touch Keyboard - Business Black, Spanish, #172

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8705)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8706) Quiet Touch Keyboard - Business Black, Japanese, #194

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8706)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8707) Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8707)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8708) Quiet Touch Keyboard - Business Black, Canadian French, #058

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8708)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8709) Quiet Touch Keyboard - Business Black, Belgian/French, #120

(No Longer Available as of April 26, 2002)

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8709)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8710) Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8710)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8711) Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8711)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8712) Quiet Touch Keyboard - Business Black, Danish, #159

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8712)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8713) Quiet Touch Keyboard - Business Black, Bulgarian, #442

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8713)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8714) Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8714)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8716) Quiet Touch Keyboard - Business Black, Norwegian, #155

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8716)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8717) Quiet Touch Keyboard - Business Black, Dutch, #143

(No Longer Available as of April 26, 2002)

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8717)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8718) Quiet Touch Keyboard - Business Black, Portuguese, #163

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8718)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8719) Quiet Touch Keyboard - Business Black, Greek, #319

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8719)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8720) Quiet Touch Keyboard - Business Black, Hebrew, #212

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8720)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8721) Quiet Touch Keyboard - Business Black, Hungarian, #208

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8721)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8722) Quiet Touch Keyboard - Business Black, Icelandic, #197

(No Longer Available as of April 26, 2002)

Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8722)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8723) Quiet Touch Keyboard - Business Black, Polish, #214

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8723)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8724) Quiet Touch Keyboard - Business Black, Romanian, #446

(No Longer Available as of April 26, 2002)

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8724)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8725) Quiet Touch Keyboard - Business Black, Slovakian, #245

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8725)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8726) Quiet Touch Keyboard - Business Black, Czech, #243

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8726)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8727) Quiet Touch Keyboard - Business Black, Turkish, #179

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8727)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8728) Quiet Touch Keyboard - Business Black, Turkish, #440

(No Longer Available as of April 26, 2002)

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8728)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8729) Quiet Touch Keyboard - Business Black, LA Spanish, #171

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8729)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8730) Quiet Touch Keyboard - Business Black, Arabic, #238

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8730)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8732) Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118

(No Longer Available as of April 26, 2002)

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8732)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8733) Quiet Touch Keyboard - Business Black, Korean, #413

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8733)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8734) Quiet Touch Keyboard - Business Black, Chinese/US, #467

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8734)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8735) Quiet Touch Keyboard - Business Black, French Canadian, #445

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8735)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8736) Quiet Touch Keyboard - Business Black, Thailand, #191

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8736)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8738) Quiet Touch Keyboard - Business Black, Russian, #443

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8738)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8739) Quiet Touch Keyboard - Business Black, Croatian, #105

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8739)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: No

Return parts MES: No

(#8740) Quiet Touch Keyboard - Business Black, US English ISO9995, #103P

Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.

Attributes required: Supported RS/6000 system with proper AIX
operating system installed.

For 7028-6E1: (#8740)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#8741) 3-Button Mouse - Business Black

3-button dynamic tracking pointing device, utilizes opto-mechanical
technology, resolution is 320 DPI, 3-meter cable, Business Black color,
standard 6-pin mini-DIN connection.

Attributes provided: Mouse capability

Attributes required: Mouse port

For 7028-6E1: (#8741)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#9004) Southern Hemisphere Designator for Monitors

Specifies that southern hemisphere models are required for all
monitors on the initial plant order or on MES orders.

Attributes provided: None

Attributes required: Monitor

For 7028-6E1: (#9004)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: AIX 4.3.3 or AIX 5.1, or later

Initial Order/MES/Both/Supported: Both

(#9300) Language Group Specify - US English

English language group for nomenclature and standard publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9300)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9703) Language Group Specify - French

French language group for Nomenclature and Standard Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9703)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9704) Language Group Specify - German

German language group for Nomenclature and Standard Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9704)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9705) Language Group Specify - Polish

Polish language group for Nomenclature and Standard Publications.

Attributes provided: none

Attributes required: none

For 7028-6E1: (#9705)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9707) Language Group Specify - Portuguese

Portuguese language group for Nomenclature and Standard Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9707)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9708) Language Group Specify - Spanish

Spanish language group for Nomenclature and Standard Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9708)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9711) Language Group Specify - Italian

Italian language group for Nomenclature and Standard Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9711)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9712) Language Group Specify - Canadian French

Canadian French language group for Nomenclature and Standard
Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9712)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9714) Language Group Specify - Japanese

Japanese language group for Nomenclature and Standard Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9714)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9715) Language Group Specify - Traditional Chinese (Taiwan)

Traditional Chinese language group for Nomenclature and Standard
Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9715)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9716) Language Group Specify - Korean

Korean language group for Nomenclature and Standard Publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9716)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9719) Language Group Specify - Hungarian

Hungarian language group for Nomenclature and Standard Publications.

Attributes provided: none

Attributes required: none

For 7028-6E1: (#9719)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9720) Language Group Specify - Slovakian

Slovakian language group for Nomenclature and Standard Publications.

Attributes provided: none

Attributes required: none

For 7028-6E1: (#9720)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9721) Language Group Specify - Russian

Russian language group for nomenclature and standard publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9721)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9722) Language Group Specify - Simplified Chinese (PRC)

Simplified Chinese language group for nomenclature and standard
publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9722)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9724) Language Group Specify - Czech

Czech language group for nomenclature and standard publications.

Attributes provided: None

Attributes required: None

For 7028-6E1: (#9724)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Initial

(#9800) Power Cord Specify - United States/Canada

The following countries use the #9800 power cord to power the system
unit and/or peripheral features requiring a power cord.

DOM U.S.

649 CANADA

832 SAUDI ARABIA

619 BAHAMAS

621 BARBADOS

627 BERMUDA

629 BOLIVIA

631 BRAZIL

661 COLOMBIA

663 COSTA RICA

681 DOMINICAN REPUBLIC

683 ECUADOR

829 EL SALVADOR

731 GUATEMALA

640 GUYANA

735 HONDURAS

759 JAMAICA

781 MEXICO

791 NETHERLANDS ANTILLES

811 PANAMA

843 SURINAM

859 TRINIDAD

871 VENEZUELA

760 JAPAN

761 JAPAN (PDS)

766 KOREA

818 PHILIPPINES

858 TAIWAN

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9800)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9802) Power Cord Specify - Brazil (125V, 15A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9802)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

CSU: Does not apply

Return parts MES: Does not apply

(#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9820)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9821) Power Cord Specify - Denmark (250V, 10A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9821)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9825) Power Cord Specify - United Kingdom (250V, 13A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9825)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9827) Power Cord Specify - Israel (250V, 6-16A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9827)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9828) Power Cord Specify - Switzerland (250V, 10A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9828)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9829)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9830) Power Cord Specify - Italy (250V, 10A and 16A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9830)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9831) Power Cord Specify - Argentina (250V, 10A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9831)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9833) Power Cord Specify - Thailand (250V, 15A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9833)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

(#9834) Power Cord Specify - Uruguay (250V, 10A)

Attributes provided: power cord

Attributes required: None

For 7028-6E1: (#9834)

Minimum required: 0

Maximum allowed: 1 (Initial order maximum: 1)

OS level required: None

Initial Order/MES/Both/Supported: Both

Feature Exchanges

Not available.

alt="Back to top"/>Back to top

cellpadding="0" summary="layout">

Accessories

None.

Customer Replacement Parts

None.

alt="Back to top"/>Back to top

cellpadding="0" summary="layout">

Machine Elements

None.

alt="Back to top"/>Back to top

cellpadding="0" summary="layout">

Supplies

None.

Diskettes

None.

Trademarks

(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.

** Company, product, or service name may be a trademark or service
mark of others.

Windows is a trademark of Microsoft Corporation.

UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.

© IBM Corporation 2005.

alt="Back to top"/>Back to top