All 3494 Enterprise Tape Library Models L12, L22, or HA1 shipped after
October 29, 2004, will contain the new LAN PCI Library Manager. The LAN
PCI Library Manager feature (#9047) must be added to each new order for a
Model L12, L22, or HA1. The LAN PCI Library Manager offers the same
technology and performance as the enhanced PCI Library Manager feature
(9046), but comes enabled for EASH attachment. The LAN PCI Library
Manager feature (#5047) can be ordered for any installed 3494 Tape
Library Base Frame Model L10, L12, or L14, or 3494 High Availability
Frame Model HA1 so they both have the same Library Manager (LM).

With this LM, the 3494 will no longer come standard with four RS232
connections and four tape control unit connections. If these connections
are required, the following feature should be ordered with the LM feature
(#9047 or #5047):

5225 (Base Tape Control Unit Attachment) - which provides four RS232
connections and four tape control unit serial cable connections. This
feature can be installed when EASH attachment is also used.

Note: Feature #5225 is required if any feature #53xx or #55xx is
installed on the Model Lxx. Also, if the 3494 Tape Library includes a
Model HA1 and one LM has feature #5225, or does not have #5047 or #9047,
then feature #5225 is required on the other LM.

A new LM may need to be ordered for the 3494 Model L1x to have a
compatible LM when adding the High Availability Frames 3494 Model HA1
(the addition of feature number 9040 on the Tape Library Base Frame Model
L10, L12, or L14), attaching 3592 Tape Drives to a 3494 Tape Library, or
supporting any of the features and functions in this announcement. The
LAN PCI Library Manager feature (#9047 or #5047) is required when adding
a new 3494 Model HA1 to any installed 3494 that does not have an LM
installed after May 15, 2000, the PCI Library Manager feature (#5046 or
#9046), or a VTS installed in the 3494 (feature #9020 on the 3494 Model
L1x). Even though the 3494 with a VTS has a compatible LM, if the PCI
Library Manager feature (#5046 or #9046) is not installed, it may be
desirable to order the LAN PCI Library Manager on the 3494 Model L1x for
the performance advantages it offers.

The Remote Support features (#2710, #2711, and #2712) are no longer
required on the 3494 and all service support can be done through the IBM
TotalStorage Master Console features (#2713, #2714, and #2715).

Increased open system hosts

The microcode firmware provided with the LAN PCI Library Manager
(#9047 or #5047) includes the capability to support attachment of up to
64 LAN attached open system hosts. This capability can be added to an
installed PCI Library Manager (#5046 or #9046) with the addition of the
following feature:

5222 (Additional 32 LAN Attached Open Systems Hosts)

The hosts are attached via the LAN interface to the LM. The LAN
interface can be through either the Token Ring Adapter feature (#5219) or
Ethernet Adapter feature (#5220). This is in addition to the 8 open
systems hosts that may be connected through the serial interface provided
by the 32 Port Attachment feature (#5227) or the Tape Control Unit
Attachment feature (#5229).

Increased open systems tape drives

Tape drives in each 3494 Model Dxx Frame can now connect to an
Ethernet Attached Serial Hub (EASH) feature instead of by a serial cable
back to the LM in the 3494 Base Frame Model Lxx. Each pair of EASH
devices can support up to the maximum number of drives in the 3494 Tape
Library Dxx Frame they reside in, and communicate via an Ethernet
interface back to the LM in the 3494 Base Frame Model Lxx. A total of 96
open systems tape drives can communicate via the EASH interface.
Combined with the 32 open systems tape drives that can communicate via
the serial interfaces of the LM in the 3494 Model Lxx Frame, a total of
128 open systems tape drives may now be attached to a single 3494 Tape
Library.

To attach the Tape Drives to the EASH, the following features must be
installed:

On each 3494 Model Dxx or Lxx Frame with tape drives:

5184 (Ethernet Attached Serial Hub) - one per frame on a 3494 Model
D12, D22, L12, or L22, which provides two EASH devices in each frame for
redundancy.

On each 3494 Model D12 or D22 Frame with a tape controller:

9060 (Attach Controller to 3494 Concentrator) - must be specified
instead of feature #9061 (Attach Controller to 3494 RS422 Connection)
when feature #5225 (Base Control Unit Attachment) is not installed on the
3494 Model Lxx Frame, to provide Ethernet cables from the tape controller
to the 3494 concentrator.

On each 3494 Model Lxx and HA1 Frame with an EASH anywhere in the
library:

9184 (EASH Enablement) - this must be on the Model L10, L12, L14, or
L22, and on the Model HA1 if feature #5184 is installed in a Model Dxx or
Lxx Frame, to enable an EASH connection on the LM.

5232 (Attachment Concentrator) - provides the internal attachment to
the LM.

5246 (Dual Path Concentrator) - is also required for EASH attachment
to provide a dual path to the drive helping eliminate a Single Point of
Failure (SPOF) and Single Point of Repair (SPOR).

An LM that was shipped after May 15, 2000, or one of the following
features on the Model Lxx:

5047 or 9047 (LAN PCI Library Manager)

5046 or 9046 (PCI Library Manager)

9020 (Model B20, B10, or B18 VTS Attachment)

A pair of Ethernet cables is provided from the LM to each frame with
EASH devices.

Software Requirements

057,1058c1201,1203

alt="Back to top"/>Back to top

060,1061c1205,1207

cellpadding="0" summary="layout">

072,1092c1218,1220

The following publications are available:

     Title                           Order Number     Language

 --------------------------------     ------------     --------

 IBM TotalStorage (TM) Enterprise

 Automated Tape Library

 Introduction and Planning Guide       GA32-0448       English

                                       GA88-8238       Japanese

  


 IBM TotalStorage (TM) Enterprise

 Automated Tape Library

 Operator Guide                        GA32-0449       English

                                       GA88-8239       Japanese

  


 IBM 3494 User's Guide:

 Media Library Device Driver

 for AS/400                            GC35-0153       English

                                       GC88-6232       Japanese

alt="Back to top"/>Back to top

094,1095c1222,1224

cellpadding="0" summary="layout">

098,1101c1227,1228

No Charge Specify Codes

summary="layout">

103,1104c1230,1232

Special Feature Codes -- Chargeable

alt="TOC Link"/>
No Charge Specify Codes

106c1234,1239

alt="TOC Link"/>
Special Feature Codes -- Chargeable

alt="TOC Link"/>

109,1110c1242,1243

No Charge Specify Codes

119,1121d1251

No specify code is required to order the default option. The
appropriate voltage and power cord is automatically supplied based on the
3-digit country code.

330a1461,1489

(#9184) EASH Enablement

This feature must be installed to enable a tape drive in the 3494 Tape
Library to connect to the library manager (LM) with an Ethernet Attached
Serial Hub (EASH) attachment. Up to 96 open system tape drives can be
connected to the LM through an EASH attachment.

Maximum: One.

Required feature: No. However, if open system attached tape drives
are in a 3494 Tape Library with the LAN PCI Library Manager feature
(#5047 or #9047), either this feature #5184 or the Base Tape Control Unit
Attachment feature (#5225) must be installed. Feature #9184 is required
if any frame in the 3494 Tape Library has feature #5184 (Ethernet
Attached Serial Hub) installed.

Corequisites:

Feature #5232 (Attachment Concentrator).

Feature #5246 (Dual Path Concentrator).

Feature #9184 must be on both the Model HA1 and the Model Lxx Frames
if the Model HA1 Frames are installed in the 3494 Tape Library.

The 3494 Model Lxx must have an LM shipped after May 15, 2000, or one
of the following features:

Feature #5047 or #9047 (LAN PCI Library Manager).

Feature #5046 or #9046 (PCI Library Manager).

Feature #9020 (Model B20, B10, or B18 VTS Attachment).

Plant or Field Installation.

469,1470c1628,1629

Special Feature Codes -- Chargeable

678a1838

(No Longer Available as of October 29, 2004)

693a1854,1880

(#5047) LAN PCI Library Manager - Field Install

This feature provides the field installation of a library manager (LM)
that supports EASH attachment of tape drives attached to open systems and
up to 64 LAN attached open system TCP/IP hosts. The LM has a PCI
architecture and includes a 1.2 Ghz processor and a mirrored dual disk
drive, to help improve performance and availability in the 3494. If this
feature is added to a 3494 that includes Model HA1 Frames, the other LM
must be feature #5046, #9046, or #9047. This feature code is for
installed units only.

Note: This LM does not come with four RS232 host connections and four
tape control unit serial connections. If that capability is required,
the Base Tape Control Unit Attachment feature (#5225) must be ordered
with this feature. Feature #5225 is also required if the other LM in the
3494 Tape Library that includes Model HA1 Frames is not feature #5047 or
#9047.

Maximum: One.

Required: Feature #5047 (or #9047) is required when adding feature
#9040 (High Availability Attachment) to any installed Model Lxx that has
a LM shipped prior to May 15, 2000, and the Model Lxx does not contain
feature #5046 or #9046 (PCI Library Manager) or feature #9020 (Model B20,
B18, or B10 VTS Attachment).

Corequisite: Feature #5225, if RS232 host connection or base tape
control unit serial connection to the LM is required (such as when
replacing an older LM with that connection requirement).

Field Installation Only.

809a1997,2010

(#5222) Additional 32 LAN Host Attachments

This feature provides an update to the microcode firmware of an
installed PCI Library Manager feature (#5046 or #9046) to support up to
64 LAN attached open system hosts. This is double the 32 LAN attached
open system hosts previously available. This capability is included in
the LAN PCI Library Manager feature (#5047 or #9047). The LAN interface
can be through either the Ethernet LAN Adapter feature (#5220) or the
Token Ring Adapter feature (#5219). Support is provided for up to 32
APPC hosts or 64 TCP/IP hosts, or combinations of those attachments.

Maximum: One.

Prerequisite: Feature #5046 or #9046.

Field Installation Only.

817a2019,2038

(#5225) Base Tape Control Unit Attachment

This feature includes an attachment card that provides four RS232 open
system host connections and four tape control unit serial attachments to
the 3494 library manager (LM). This feature is not required if all open
system attached tape drives are connected to the LM with an EASH
attachment, or if LAN attachment to open system hosts is used instead of
an RS232 attachment. If this feature is added to a 3494 that includes
Model HA1 Frames, the other LM must also have this capability.