c5
Revised: April 13, 2004.
Revised: April 27, 2004.
9a30
6,52c37,51
modular design
helps allow the 3494 to grow as your business grows. Flexible
configuration choices start at a single frame with up to two tape drives
and up to 240 tape cartridges. Optional drive, storage, and Virtual Tape
Server units may be added as needed, to create an automated tape library
with up to 76 physical tape drives, 512 virtual tape drives, or up to
6,240 tape cartridges. Choices in tape drives for the 3494 can be
the IBM TotalStorage Enterprise Tape Drive 3592,
the IBM TotalStorage Enterprise Tape Drive 3590,
or the IBM 3490E. Different tape drives can be installed in different
frames in the same 3494 library. The 3494 supports a variety of IBM
and Open Systems hosts including IBM eServer zSeries, S/390*,
IBM eServer pSeries, RS/6000*, IBM eServer iSeries, AS/400*,
Sun**, HP, and Intel-compatible servers running Microsoft Windows** NT,
2000, and 2003. Also available are unique optional models such as
the IBM TotalStorage Enterprise High Availability Tape Frames (HA1
Frames) and the IBM TotalStorage Virtual Tape Server (VTS). The HA1
modular design helps allow the 3494 to grow as your business grows.
Flexible configuration choices start at a single frame with up to two
tape drives and up to 240 tape cartridges. Optional drive, storage, and
Virtual Tape Server units may be added as needed, to create an automated
tape library with up to 76 physical tape drives, 512 virtual tape drives,
or up to 6,240 tape cartridges. Choices in tape drives for the 3494 can
be the IBM TotalStorage Enterprise Tape Drive 3592, the IBM TotalStorage
Enterprise Tape Drive 3590, or the IBM 3490E. Different tape drives can
be installed in different frames in the same 3494 library. The 3494
supports a variety of IBM and Open Systems hosts including IBM eServer
zSeries, S/390*, IBM eServer pSeries, RS/6000*, IBM eServer iSeries,
AS/400*, Sun**, HP, and Intel-compatible servers running Microsoft
Windows** NT, 2000, and 2003. Also available are unique optional models
such as the IBM TotalStorage Enterprise High Availability Tape Frames
(HA1 Frames) and the IBM TotalStorage Virtual Tape Server (VTS). The HA1
7,62c56,60
of the 3494 to create a self-contained hierarchical
storage management subsystem. All this, in addition to remote console
support, Simple Network Management Protocol (SNMP) reporting
capabilities, multi-host attachment, and modular design, assist in making
the 3494 flexible, easy to use, and well-suited for automated tape
library solutions.
of the 3494 to create a self-contained hierarchical storage management
subsystem. All this, in addition to remote console support, Simple
Network Management Protocol (SNMP) reporting capabilities, multi-host
attachment, and modular design, assist in making the 3494 flexible, easy
to use, and well-suited for automated tape library solutions.
6,68c64,66
manager, up to two 3590 Tape Drives, and storage cells for 1/2"
tape cartridges. It is designed to grow as your storage and usage needs
grow. The cartridge capacity is determined by whether or not an optional
manager, up to two 3590 Tape Drives, and storage cells for 1/2" tape
cartridges. It is designed to grow as your storage and usage needs grow.
The cartridge capacity is determined by whether or not an optional
08,109c106,107
Supports 3590 Technology (0 to 32 SCSI or Fibre Channel
attached tape drive transports or 0 to 76 ESCON/FICON* attached drives)
Supports 3590 Technology (0 to 32 SCSI or Fibre Channel attached tape
drive transports or 0 to 76 ESCON/FICON* attached drives)
33,144c131,142
and B1A Tape Drives the 3590 Model
A00, A50, and A60 Controllers, and can include the 3494 VTS Model B16. A
Model B10, B18, or B20 VTS can be externally attached to the 3494. The
VTSs are cost/performance solutions to provide attached host systems a
hierarchical storage management system and exploit the capacity and
performance of attached 3590 Tape Drives. The Model HA1 Frames
provide a second accessor and library manager for high availability and
improved performance. The 3494 provides a cost-effective solution for
automating tape operations such as save/restore, migration of data
between disk and tape, and other mass data applications. Cost savings
result from high performance and reduced requirements in tape drives,
cartridges, floor space, power, and personnel.
and B1A Tape Drives the 3590 Model A00, A50, and A60 Controllers, and can
include the 3494 VTS Model B16. A Model B10, B18, or B20 VTS can be
externally attached to the 3494. The VTSs are cost/performance solutions
to provide attached host systems a hierarchical storage management system
and exploit the capacity and performance of attached 3590 Tape Drives.
The Model HA1 Frames provide a second accessor and library manager for
high availability and improved performance. The 3494 provides a
cost-effective solution for automating tape operations such as
save/restore, migration of data between disk and tape, and other mass
data applications. Cost savings result from high performance and reduced
requirements in tape drives, cartridges, floor space, power, and
personnel.
71,173c169,171
#5400 are supported as field changes only.
The 3494 Model L12 also supports 3592 tape drives in attached D22
frames, or 3592 tape drives and controllers in attached D24 frames.
#5400 are supported as field changes only. The 3494 Model L12 also
supports 3592 tape drives in attached D22 frames, or 3592 tape drives and
controllers in attached D24 frames.
86,187c184,185
customer to take advantage of the new IBM 3590 tape technology.
The L12 frame can be upgraded to a L22 frame to support 3592 drives.
customer to take advantage of the new IBM 3590 tape technology. The L12
frame can be upgraded to a L22 frame to support 3592 drives.
11,233c209,228
tape drive, and 3590 Model A50 or
A00 Controller utilize one tape control unit connection. The 3490E Model
F1A Control Unit (feature #3000 or #3500) requires one host RS-232
connection. The Model B16 VTS requires two tape control function
connections and one host processor connection. The 3590 Model A60
or 3592 Model J70 Controller
utilizes one tape control unit connection for each feature
#9061 specified. If the Model A60 attaches to the Attachment
Concentrator (#5232), then one feature #9060 should be specified on the
Model L1x for each attached Model A60 or J70
and no tape control unit connection
on the library manager is used. The quantity of tape transports
supported is dependent on the mix of tape drives and/or tape controllers
installed. Processor connections for library commands include up to 8
RS-232 connections, when #5229 is installed, and token ring (#5219) or
Ethernet (#5220) LAN attachment. The quantity of LAN-attached processors
is limited to 32. Each 3590 Tape Drive has two SCSI-2 or Fibre Channel
connections available. Each 3590 Model A50 or A00 Controller can have 2
ESCON connections available. The 3590 Model A60 or 3592 Model J70
Controller can have ESCON or FICON connections.
Each 3490E Model CxA has 2 SCSI-2, OEMI, or
ESCON connections available in any combination. Each F1A can be attached
to a SCSI-host adapter, or through its control unit (feature #3500) to
tape drive, and 3590 Model A50 or A00 Controller utilize one tape control
unit connection. The 3490E Model F1A Control Unit (feature #3000 or
#3500) requires one host RS-232 connection. The Model B16 VTS requires
two tape control function connections and one host processor connection.
The 3590 Model A60 or 3592 Model J70 Controller utilizes one tape control
unit connection for each feature #9061 specified. If the Model A60
attaches to the Attachment Concentrator (#5232), then one feature #9060
should be specified on the Model L1x for each attached Model A60 or J70
and no tape control unit connection on the library manager is used. The
quantity of tape transports supported is dependent on the mix of tape
drives and/or tape controllers installed. Processor connections for
library commands include up to 8 RS-232 connections, when #5229 is
installed, and token ring (#5219) or Ethernet (#5220) LAN attachment.
The quantity of LAN-attached processors is limited to 32. Each 3590 Tape
Drive has two SCSI-2 or Fibre Channel connections available. Each 3590
Model A50 or A00 Controller can have 2 ESCON connections available. The
3590 Model A60 or 3592 Model J70 Controller can have ESCON or FICON
connections. Each 3490E Model CxA has 2 SCSI-2, OEMI, or ESCON
connections available in any combination. Each F1A can be attached to a
SCSI-host adapter, or through its control unit (feature #3500) to
46,248c241,243
programs, such as IPL, that do not require the support of a full-
operating system. The Mount from Input Station function allows one or
more cartridges to be placed into the convenience I/O station and be
programs, such as IPL, that do not require the support of a
full-operating system. The Mount from Input Station function allows one
or more cartridges to be placed into the convenience I/O station and be
44,346c339,341
when the 3494 configuration does not contain a Model HA1. When Model
HA1 Frames are attached, configurations of 3, 4, 6, 8, 10, 12, and 16
frames are allowed (not counting the two service bay frames).
when the 3494 configuration does not contain a Model HA1. When Model HA1
Frames are attached, configurations of 3, 4, 6, 8, 10, 12, and 16 frames
are allowed (not counting the two service bay frames).
51,366c346,357
fibre attached 3592 tape drive or
B1A, Fibre-Channel attached 3590 Model H1A or E1A, and 3590 Model A50 or
A00 Controller utilize one tape control unit connection. The 3490E Model
F1A Control Unit (feature #3000 or #3500) requires one host RS-232
connection. The 3494 VTS Model B16 uses two tape control unit
connections and one host processor connection. Tape control functions,
(CXA/F1A/B1A/E1A/H1A/A50/A00/B16), can be mixed in any quantity up to 32
with appropriate features. The 3590 Model A60 or 3592 Model J70
Controller utilizes one
tape control unit connection for each feature #9061 specified. If the
Model A60 or J70 attaches to the Attachment Concentrator
(#5232), then one
feature #9060 should be specified on the Model L1x for each attached
Model A60 or J70 and no tape control unit
connection on the library manager is
used.
fibre attached 3592 tape drive or B1A, Fibre-Channel attached 3590 Model
H1A or E1A, and 3590 Model A50 or A00 Controller utilize one tape control
unit connection. The 3490E Model F1A Control Unit (feature #3000 or
#3500) requires one host RS-232 connection. The 3494 VTS Model B16 uses
two tape control unit connections and one host processor connection.
Tape control functions, (CXA/F1A/B1A/E1A/H1A/A50/A00/B16), can be mixed
in any quantity up to 32 with appropriate features. The 3590 Model A60
or 3592 Model J70 Controller utilizes one tape control unit connection
for each feature #9061 specified. If the Model A60 or J70 attaches to
the Attachment Concentrator (#5232), then one feature #9060 should be
specified on the Model L1x for each attached Model A60 or J70 and no tape
control unit connection on the library manager is used.
30,534c521,524
L10, L12, L14, or L22.
The Tape Library Base Frame Model L12 contains the
library manager, space for up to two 3590 Tape Drives, and storage for
240 cartridges. With the Convenience I/O Station (#5210) installed, the
cartridge capacity is 210 and with the 30 Cartridge Convenience I/O
L10, L12, L14, or L22. The Tape Library Base Frame Model L12 contains
the library manager, space for up to two 3590 Tape Drives, and storage
for 240 cartridges. With the Convenience I/O Station (#5210) installed,
the cartridge capacity is 210 and with the 30 Cartridge Convenience I/O
53,561c543,550
Model H1A or E1A, Fibre Channel Attached 3592,
and 3590 Model A50 or A00 Controller utilize one tape
control unit connection. The 3490E Model F1A Control Unit (feature #3000
or #3500) requires one host RS-232 connection. The 3494 VTS Model B16
uses two tape control unit connections and one host processor connection.
Tape control functions, (CXA/F1A/B1A/E1A/H1A/A50/A00/B16), can be mixed
in any quantity up to 32 with appropriate features. The 3590 Model A60
or 3592 Model J70 Controller
utilizes one tape control unit connection for each feature
Model H1A or E1A, Fibre Channel Attached 3592, and 3590 Model A50 or A00
Controller utilize one tape control unit connection. The 3490E Model F1A
Control Unit (feature #3000 or #3500) requires one host RS-232
connection. The 3494 VTS Model B16 uses two tape control unit
connections and one host processor connection. Tape control functions,
(CXA/F1A/B1A/E1A/H1A/A50/A00/B16), can be mixed in any quantity up to 32
with appropriate features. The 3590 Model A60 or 3592 Model J70
Controller utilizes one tape control unit connection for each feature
64,573c553,561
Model L1x for each attached Model A60 or J70
and no tape control unit connection
on the library manager is used. The quantity of tape transports
supported is dependent on the mix of tape drives installed. Processor
connections for library commands include up to 8 RS-232 connections, when
#5229 is installed, and token ring or Ethernet LAN attachment. The
quantity of LAN-attached processors is limited by the quantity of tape
transport connections available. Each additional frame can contain up to
400 cartridges. Total cartridge storage capacity ranges from 160 to 6240
cartridges.
Model L1x for each attached Model A60 or J70 and no tape control unit
connection on the library manager is used. The quantity of tape
transports supported is dependent on the mix of tape drives installed.
Processor connections for library commands include up to 8 RS-232
connections, when #5229 is installed, and token ring or Ethernet LAN
attachment. The quantity of LAN-attached processors is limited by the
quantity of tape transport connections available. Each additional frame
can contain up to 400 cartridges. Total cartridge storage capacity
ranges from 160 to 6240 cartridges.
85,590c573,578
Media identifier JA in both human and machine readable form.
All 3590 Extended High Performance Cartridge Tapes must have a separate
single character label with the letter K in both human and
machine-readable form. All High-Performance 3590 Cartridge Tapes must
have a separate single character label with the letter J in both human
and machine-readable form. All Enhanced Capacity Cartridge System Tape
Media identifier JA in both human and machine readable form. All 3590
Extended High Performance Cartridge Tapes must have a separate single
character label with the letter K in both human and machine-readable
form. All High-Performance 3590 Cartridge Tapes must have a separate
single character label with the letter J in both human and
machine-readable form. All Enhanced Capacity Cartridge System Tape
94,595c582,583
with the character 1. No other machine-readable labels are allowed to be
placed on the cartridge. The VOLSER on the external label should
with the character 1. No other machine-readable labels are allowed to
be placed on the cartridge. The VOLSER on the external label should