     Title                           Order Number     Language

 --------------------------------     ------------     --------

 IBM TotalStorage Enterprise

 Automated Tape Library

 Introduction and Planning Guide       GA32-0448       English

                                       GA88-8238       Japanese

  


 IBM TotalStorage Enterprise

 Automated Tape Library

 Operator Guide                        GA32-0449       English

                                       GA88-8239       Japanese

alt="Back to top"/>Back to top

524,1525c1551,1553

cellpadding="0" summary="layout">

528,1531c1556,1557

No Charge Specify Codes

summary="layout">

533,1534c1559,1561

Special Feature Codes -- Chargeable

alt="TOC Link"/>
No Charge Specify Codes

536c1563,1568

alt="TOC Link"/>
Special Feature Codes -- Chargeable

alt="TOC Link"/>

539,1540c1571,1572

Special Feature Codes -- Chargeable

Power Cord

The appropriate power cord is attached at the factory except for the
following:

(#9986) 6-Foot Chicago Power Cord

Plant specify or field installation with a Model B16 to B18 model
conversion.

Special Feature Codes -- Chargeable

697a1736,1763

(#1026) Convert 8 VTC PtP to 4 VTC PtP Configuration

This feature allows an 8 VTC PtP configuration of VTS Model B18
to be converted to a 4 VTC VTS Model B20 PtP configuration. This
feature must be ordered on each VTS in that PtP configuration. For a
Model B18, it must be included on the MES with the B18 to B20 model
conversion.

Maximum: One

Corequisites:

To convert an 8 VTC Model B18 to 4 VTC Model B20,
four channel adapters must be removed from the Model B18 with its
conversion to a Model B20. In addition, a VTS Model B20 with four
attached VTCs requires a quantity two of feature #5265 (Incremental
Virtual Drives). A feature conversion is available to convert
the feature #5264 (64 Additional Virtual Drives) to one feature #5265,
and the second feature #5265 must be added.

The conversion from an 8 to 4 VTC PtP configuration may require
a Model CX0 to Model CX1
conversion or a conversion of the existing VTCs in a Model CX1.
If the Model CX0 or CX1 does not match the required
configuration, the necessary features (#11xx, #1023, #1024, or #1025)
or feature conversions must be ordered on the Model CX1.
Based on the Model CX0s or CX1s final configuration, the required
corresponding host adapters may also need to be ordered on the VTSs.

Field Installation Only

154,2155c2220,2221