c5,7

Revised: August 10, 2004.

Revised: October 26, 2004.

summary="layout">

2a35,36

summary="layout">

5a40,41

cellpadding="0" summary="layout">

9c45
member of the IBM TotalStorage Virtualization Family of solutions. The
member of the IBM TotalStorage Open Software Family of solutions. The

2,57c58,63

The IBM 2145 SAN Volume Controller Model 4F2 has a 2.4 GHz, 2-way
Intel Prestonia processor, 4 GB high speed memory, redundant
Uninterruptable Power Supplies (UPSs), 36 GB hard drive, and language
support.

The IBM 2145 SAN Volume Controller Model 4F2 has dual 2.4 GHz, 2-way
Intel Prestonia processors, 4 GB high speed memory, redundant
Uninterruptable Power Supplies (UPSs), and language support.

alt="Back to top"/>Back to top

0c66,67

cellpadding="0" summary="layout">

7,78c84,86

alt="Back to top"/>Back to top

1c89,90

cellpadding="0" summary="layout">

9,93c98,102
Engine is a node; two nodes make up a node pair (I/O Group), and one or
two I/O Groups constitute a SAN Volume Controller cluster. The cluster
is scalable from one to two node pairs (I/O Groups) and supported by dual
read/write cache. This design is intended to avoid single points of
failure and support concurrent maintenance.
Engine is a node; two nodes make up a node pair (I/O Group), and one to
four I/O Groups constitute a SAN Volume Controller cluster. The cluster
is scalable from one to four node pairs (I/O Groups) and supported by
dual read/write cache. This design is intended to avoid single points
of failure and support concurrent maintenance.

31a141,146

If the master console is used to manage more than two I/O Groups
(4 nodes) within a cluster, it must have 2 GB of RAM. Master consoles
after October 29, 2004 ship with 2 GB of RAM installed.
Questions about master console memory requirements should be directed to:
Virtualization One-Off Administrator/Raleigh/IBM@IBMUS
by your IBM sales representative.

40c155

In the event of a power failure, the UPSs provide temporary power

In the event of a power failure, the UPS pair provides temporary power

44c159,160
day that is convenient for the customer. Two UPSs are required to
day that is convenient for the customer.

UPSs are paired to

46c162,163
Each UPS requires a 220 V, 15 amp power source and must be protected by a
Each UPS in the UPS pair
requires a 220 V, 15 amp power source and must be protected by its own

48,152c165,172
provide added redundancy.

Power cords to connect the UPSs to a standard PDU ships standard with
the UPSs. If the UPSs will not be installed in a rack with a PDU, power
cords must be ordered with the UPSs to connect to an alternate power
source.
provide added redundancy. Two UPS pairs can share the two separate
circuits, but each UPS must be protected by its own 15 amp circuit
breaker.

One UPS pair (#8100) is required for one or two I/O Groups;
a second UPS pair is required for a three or four I/O Group SVC cluster.

Power cords to connect the UPSs to a standard PDU ship standard with
the UPSs. In addition, country-specific power cords must be ordered
for UPSs so they can be installed in a rack without a PDU.

61,162c181,183

alt="Back to top"/>Back to top

65c186,187

cellpadding="0" summary="layout">

72,173c194,196

alt="Back to top"/>Back to top

76c199,200

cellpadding="0" summary="layout">

98c222
to a maximum of four machines per SAN Volume Controller cluster.
to a maximum of eight machines per SAN Volume Controller cluster.

09,210c233,235

alt="Back to top"/>Back to top

13c238,239

cellpadding="0" summary="layout">

57c389
Controller is four.
Controller is eight, configured in four I/O groups.

59,362c391,393
Pack for SAN Management or Bonus Kit for SAN Management.
The license for the IBM Tivoli Bonus Pack for SAN Management or
Bonus Kit for SAN Management applies to the enterprise
acquiring the SAN Volume
Pack for SAN Management or Bonus Kit for SAN Management. The license for
the IBM Tivoli Bonus Pack for SAN Management or Bonus Kit for SAN
Management applies to the enterprise acquiring the SAN Volume

82,387c413,419

The UPS requires two dedicated circuits, one for each of the
redundant UPSs. Each circuit must be protected by a 15 amp
circuit breaker and supply single-phase 220 volts at 50 to 60 Hz.
It is recommended that these be on separate circuits to provide added
redundancy in the system structure.

Power cords to connect the UPSs (feature number 8100) to a compatible

Each UPS in the UPS pair must be powered by a single-phase 220 volt,
15 amp, 50 to 60 Hz power source. It is recommended that these be on
separate circuits to provide added redundancy in the system structure.
If there are two UPS pairs in the SVC cluster,
they may share the two dedicated circuits, but each UPS must still be
protected by its own 15 amp circuit breaker.

Power cords to connect the UPSs (feature # 8100) to a compatible

92,593c624,626

alt="Back to top"/>Back to top

96c629,630

cellpadding="0" summary="layout">

14d647
Version 1, Release 1, VRM 1.1.0

34c667
Web by August 29, 2003. They can be downloaded from:
Web by October 29, 2003. They can be downloaded from:

03c736
---------------------------------------------------------- ---------
------------------------------------------------- ---------

07,708c740,742

alt="Back to top"/>Back to top

11c745,746

cellpadding="0" summary="layout">

Power Cords

UPS

Power cords to connect the UPSs (feature number 8100) to a compatible
Power Distribution Unit (PDU) ship standard with the UPSs.

Power cords to connect the UPS pair(s) (feature number 8100) to a
compatible Power Distribution Unit (PDU), ship standard with the UPSs.

35,736c772,774
One of the following power cord Specify
Features is required to connect the UPSs to the alternate power source.
One of the following power cord Specify Features is required to connect
each UPS pair to the alternate power source. If two UPS pairs are
ordered, two country-specific power cord features must be ordered.

39,743c777,779
Hardware Requirements section.

Power cords are both Plant and Field installable.

 


 Power Cord

 Hardware Requirements section.

 
Power cords are both Plant and Field installable.

 
Power Cord

45c781

 ----------------------         -------   -----   -------

 -----------------------------  -------   -----   -------

64,774c800,810

 Minimum number of features:  None.

 
Maximum number of features:  One.

 
Prerequisites:  Feature #8100.

 
Corequisites:  None.

 
Compatibility Conflicts:  None.

 
Customer Setup:  No.

 
Limitations:  Only one UPS Power Cord feature may be

 ordered for each machine.

 
Field installable:  Yes.

 
Plant installable:  Yes.

 


 Minimum number of features:  One.

 
Maximum number of features:  Two.

 
Prerequisites:  Feature #8100.

 
Corequisites:  None.

 
Compatibility Conflicts:  None.

 
Customer Setup:  No.

 
Limitations:  Only one UPS Power Cord feature may be

 ordered for each UPS pair.

 
Field installable:  Yes.

 
Plant installable:  Yes.

 


03c839

 Maximum number of features:  One.

 
Maximum number of features:  Two.

09c845

 machine.

 master console (#4001)

51c887

 
Compatibility Conflicts:  None.

 
Compatibility Conflicts:  Mutually exclusive with feature #1724.

74,925d909

 SAN Integration Server            2145     4F2    9298    Plant   No

  (Integration Routing)

 UPS Power (Line) Cords

                                                           Plant/

 Description                      Machine  Model  Feature  Field   CSU

 -----------------------------    -------  -----  -------  ------  ---

 UPS Power Cord - US/Canada        2145     4F2    9800    Both    No

  (250V/15A - 2.5 m)

 UPS Power Cord - EMEA             2145     4F2    9820    Both    No

  (250V/16A - 2.5 m)

 UPS Power Cord - Swiss, Liech     2145     4F2    9825    Both    No

  (250V/16A - 2.5 m)

 UPS Power Cord - Thailand         2145     4F2    9827    Both    No

  (250V/15A - 2.5 m)

 UPS Power Cord - S. Africa        2145     4F2    9829    Both    No

  (250V/16A - 2.5 m)

 UPS Power Cord - Aust/NZ          2145     4F2    9831    Both    No

  (250V/20A - 2.5 m)

 UPS Power Cord - Denmark          2145     4F2    9838    Both    No

  (250V/16A - 2.5 m)

 UPS Power Cord - US/Chicago       2145     4F2    9986    Both    No

  (250V/15A - 1.8 m)

 Master Console Power (Line) Cords

                                                           Plant/

 Description                      Machine  Model  Feature  Field   CSU

 ----------------------           -------  -----  -------  ------  ---

  MC Power Cord (#1)               2145     4F2    9701    Both    No

   U.S. 110 V 6'

  MC Power Cord (#2)               2145     4F2    9702    Both    No

   Eur,Mid-East,Africa

  MC Power Cord (#3)               2145     4F2    9703    Both    No

   Austral,N.Z.

  MC Power Cord (#4)               2145     4F2    9704    Both    No

   Eur,S.Korea

  MC Power Cord (#5)               2145     4F2    9705    Both    No

   Eur,Den

  MC Power Cord (#6)               2145     4F2    9706    Both    No

   Pakistan,S.Africa

  MC Power Cord (#7)               2145     4F2    9707    Both    No

   Switz,Liechtenstein

  MC Power Cord (#8)               2145     4F2    9708    Both    No

   Chile,Italy,Ethiopia

  MC Power Cord (#9)               2145     4F2    9709    Both    No

   Israel

  MC Power Cord (#10)              2145     4F2    9710    Both    No

   US/Japan/S.America

  MC Power Cord (#11)              2145     4F2    9711    Both    No

   Argentina

  MC Power Cord (#12)              2145     4F2    9712    Both    No

   China

  MC Power Cord (#13)              2145     4F2    9713    Both    No

   US 110 V, 9'

69,971c953,955

 must be an odd number (one or three); when ordered to add to an existing

 cluster, the number must be even (two).  This feature is plant installed

 only.

 must be an odd number (1, 3, 5, or 7); when ordered to add to an

 existing cluster, the number must be even (2, 4, or 6).  This feature is

 plant installed only.

91a976,981

 If the master console is used to manage more than two I/O Groups

 (4 nodes) within a cluster, it must have 2 GB of RAM.  Master consoles

 after October 29, 2004 ship with 2 GB of RAM installed.

 Questions about master console memory requirements should be directed to:

 Virtualization One-Off Administrator/Raleigh/IBM@IBMUS

 by your IBM sales representative.

99c989

 
Maximum number of features per Model 4F2:  One.

 
Maximum number of features per Model 4F2:  Two.

021a1012,1013

 
Maximum number of features per Model 4F2:  Eight if two master

 console features (#4001) are included in the order.

041a1034,1035

 
Maximum number of features per Model 4F2:  Eight if two master

 console features (#4001) are included in the order.

061a1056,1057

 
Maximum number of features per Model 4F2:  Eight if two master

 console features (#4001) are included in the order.

081a1078,1079

 
Maximum number of features per Model 4F2:  Eight if two master

 console features (#4001) are included in the order.

093,1094c1091,1092

 each SAN Volume Controller.  It must be included in the order for

 the first SVC Storage Engine of each and every SAN Volume Controller

 each SAN Volume Controller.  This feature must be included in the order

 for the first SVC Storage Engine of each and every SAN Volume Controller

097,1113c1095,1113

 Each UPS includes power (line) cords that will connect

 the UPS to a rack power distribution unit (PDU).

 Optional country-specific power cords,

 specified by feature number, may also be included in

 the initial SVC Storage Engine order if a PDU is not used.

 

 Minimum number of features per Model 4F2:  None.

 
Maximum number of features per Model 4F2:  One.

 
Prerequisites:  Feature number 3001.

 
Corequisites:  None.

 
Compatibility Conflicts:  Mutually exclusive with

 Feature #3002.

 
Customer Setup:  No.

 
Limitations:  None.

 
Field installable:  Yes.

 
Plant installable:  Yes.

 


 One UPS pair (#8100) is required for one or two I/O Groups;

 a second UPS pair is required for a three or four I/O Group SVC cluster.

 
Each UPS pair includes power (line) cords that will connect

 the UPS pair to a rack power distribution unit (PDU).

 Country-specific power cords, specified by feature number, must also

 be included in the order for each UPS pair ordered.

 


 Minimum number of features per Model 4F2:  One on the initial order;

                                                None on an MES order.

 
Maximum number of features per Model 4F2:  Two on the initial order;

                                                one on an MES order.

 
Prerequisites:  Feature #3001 on the initial order.

 
Corequisites:  One country-specific power cord (#98xx).

 
Compatibility Conflicts:  None.

 
Customer Setup:  No.

 
Limitations:  Maximum of two #8100 per SVC.

 
Field installable:  Yes.

 
Plant installable:  Yes.

 


117,1118c1117,1119

 


 


 


 
 alt="Back to top"/>Back to top

121c1122,1123

cellpadding="0" summary="layout">

127,1128c1129,1131

alt="Back to top"/>Back to top

131c1134,1135

cellpadding="0" summary="layout">

135,1136c1139,1141

alt="Back to top"/>Back to top

139c1144,1145

cellpadding="0" summary="layout">

152a1159,1161

alt="Back to top"/>Back to top