d2

Family 2027+01 IBM Total Storage SAN140M Director and SAN32M-1 Switch



c4

Revised:  October 05, 2004.



Revised:  March 08, 2005.



3c12



7c16



1c20



5c24



7c26



9c28



23,224d221

Maximum


Not applicable.


40c237



47c244



51c248



55c252



60c257



64c261



85,286c282,283

Physical Specifications



Physical Specifications



06,307c303,304

Operating Environment



Operating Environment



44,345c341,342

Limitations



Limitations



47,348c344,345

Hardware Requirements



Hardware Requirements



50,355c347,350

The SAN140M director is only supported in the 2032-C40 cabinet. You
must select either the plant or field cabinet integration code. To
ensure you receive your choice of country specific power cord on the
SAN140M, specify a country-specific power cord, (#10xx).

The SAN32M-1 is supported in the 2032-C40 (plant and field) and is
supported IBM cabinets (field) upon selection of the appropriate cabinet

The SAN140M director is supported in the 2032-C40 and 2027-C40
cabinets, upon selection of the appropriate cabinet integration code.

The SAN32M-1 is supported in the 2032-C40, 2027-C40, and supported IBM
cabinets (field only) upon selection of the appropriate cabinet


57,358c352,353
industry-standard 19-inch racks, review the installation planning
information for any product specific installation requirements.
industry-standard 19-inch racks, review the installation
planning information for any product specific installation requirements.

65,369c360,363

To ensure you receive the correct country-specific power cord for the
SAN32M-1, specify the power cord feature (#10xx).

Cabinet Requirements: Each 2032-C40 Cabinet requires at least one IBM
TotalStorage SAN140M director or IBM TotalStorage SAN32M-1 switch to be
ordered with your initial order. The 2032-C40 is designed to support the

Cabinet Requirements

Each 2032-C40 and 2027-C40 Cabinet requires at least one IBM
TotalStorage m-type director or switch to be ordered with your initial
order. The 2032-C40 and 2027-C40 cabinets are designed to support the


71,372c365,375

Software Requirements


The Model 140 and 232 are equipped with one 110v U.S.
Power Cord and one rack PDU jumper in the base configuration.
In the U.S., all other U.S. power cord selections are
completely optional. For example, if a U.S. 220v Power Cord
is desired, there are various, optional U.S. feature numbers
to select from. For non-U.S. installations, appropriate power
cord selection is required. If the Model 140 or Model 232 are
not being installed in the U.S., you must choose the
appropriate power cord for the country the machine will be installed in.

Software Requirements



82c385



33c436



40c443



44c447



48c451



53,454c456,457

No Charge Specify Codes



No Charge Specify Codes



89c492

Power Cords (Model 140)

Power Cords - Model 140 and Model 232


91,509c494,524
in the order for each 2027 Model 140. To ensure you receive the correct
country specific power cord, specify the power cord in your initial plant
order.

Power Cords (Model 232)

One, and only one, country-specific
power cord feature may be included in the order for each 2027 Model 232.
To ensure you receive the correct country-specific power cord, specify
the power cord in your initial plant order.

These features are plant-install only; they may not be ordered as MES.


  • Minimum number of features for 2027-140: One.
  • Maximum number of features for 2027-140: One.
  • Minimum number of features for 2027-232: One.
  • Maximum number of features for 2027-232: One.
  • Prerequisites: None.
  • Corequisites: None.
  • Compatibility Conflicts: All 2027-232 power cord features are
    mutually exclusive.
  • Customer Setup: No.
    in the order for each Model 140 and Model 232. To ensure you receive the
    correct country specific power cord, you must specify the power cord in
    your initial plant order. The Model 140 and Model 232 are equipped with
    one 110v U.S. Power Cord, and one rack PDU jumper in the base
    configuration. In the U.S., all other U.S. power cord
    selections are completely optional. For example, if a U.S.
    220v Power Cord is desired, there are various optional U.S.
    feature numbers to select from. For non-U.S. installations,
    appropriate power cord selection is required. If the
    Model 140 and Model 232 are not being installed in the
    U.S., you must choose the appropriate power cord for the
    country the machine will be installed in.

    These features are plant install only; they may not be
    ordered as MES.

    (#1012 - #1030) Power Cords for the 2027-140 and 2027-232



      US--->

    • Minimum number of features for 2027-140 and 2027-232: None.
    • Maximum number of features for 2027-140 and 2027-232: One.

      <---US

      AP, LA, CAN, EMEA--->

    • Minimum number of features for 2027-140 and 2027-232: One.
    • Maximum number of features for 2027-140 and 2027-232: One.

      <---AP, LA, CAN, EMEA

    • Prerequisites: None.
    • Corequisites: None.
    • Compatibility Conflicts: All 2027-140 and 2027-232 power cord
      features are mutually exclusive. For non-U.S. orders, you must
      specify one Power Cord feature (#1012-#1030) in your initial
      plant order for the 2027-140 and 2027-232.
    • Customer Set-up: No.

      11,512c526
    • Plant installable: Yes.
    • Field Installable: No.
    • Plant / Field Install: Plant install only.

      22c536,540
      Inst SAN32M1 in IBM Cab (Field) 2027 232 9237 Plant
      Field Install 2027-232 in IBM Cab. 2027 232 9237 Plant
      Plant Install 2027-140 in 2027-C40 2027 140 9241 Plant
      Field Install 2027-140 in 2027-C40 2027 140 9242 Plant
      Plant Install 2027-232 in 2027-C40 2027 232 9243 Plant
      Field Install 2027-232 in 2027-C40 2027 232 9244 Plant

      26,530c544,549
      m-type family will be plant or field installed in the 2032 Model C40 or
      in a supported IBM cabinet. Note that the Plant installation features
      for Models 140 and 232 have matching/paired features on the 2032 Model
      C40; both install features must be specified.

      Installation in a cabinet:


      m-type family will be plant or field installed in the 2032 Model C40,
      2027 Model C40, or in a supported IBM cabinet. Note that the plant
      installation features for Models 140 and 232 have matching/paired
      features on the 2032 Model C40 and 2027 Model C40; both install
      features must be specified.

      Installation in a cabinet


      32,534c551,553

      This feature specifies installation of the IBM TotalStorage SAN140M
      director in a 2032 Model C40 cabinet prior to being shipped from the
      plant.

      This feature specifies installation of the IBM TotalStorage
      SAN140M director in a 2032 Model C40 Cabinet prior to being
      shipped from the plant.


      36,541c555,557

      This feature specifies installation of the IBM TotalStorage SAN140M
      director in a 2032 Model C40 cabinet by IBM when the switch is installed
      at the customer location. Note: the SAN140M director is only supported
      in the 2032-C40 cabinet.

      One of these features must be specified on the initial order of the
      2027 Model 140.

      This feature specifies installation of the IBM TotalStorage
      SAN140M director in a 2032 Model C40 Cabinet by IBM when the
      switch is installed at the customer location.


      53a570

      (No Longer Available as of June 10, 2005)


      61c578

      (#9237) Inst SAN32M1 in IBM Cab (Fld)


      (#9237) Field Install 2027-232 in IBM 7014 Cabinet



      80,581c597,650

      Special Feature Codes -- Chargeable


      (#9241) Plant Install 2027-140 in 2027-C40


      This feature provides factory installation of 2027-140 in a
      2027-C40 Cabinet.


      • Minimum Number of Features per 2027-140: None.
      • Maximum Number of Features per 2027-140: One.
      • Prerequisites: Must select feature #9241 or #9242.
      • Corequisites: Must specify feature #9225 on 2027-C40.
      • Compatibility Conflicts: None.
      • Customer Setup: No.
      • Limitations: None.
      • Plant / Field Installable: Plant install only.

      (#9242) Field Install 2027-140 in 2027-C40


      This feature provides field installation of 2027-140 in a 2027-C40
      Cabinet.


      • Minimum Number of Features per 2027-140: None.
      • Maximum Number of Features per 2027-140: One.
      • Prerequisites: Must select feature #9241 or #9242.
      • Corequisites: Must have sufficient space available in 2027-C40.
      • Compatibility Conflicts: None.
      • Customer Setup: No.
      • Limitations: None.
      • Plant / Field Installable: Initial Plant Order only.

      (#9243) Plant Install 2027-232 in 2027-C40


      This feature provides factory installation of 2027-140 in a
      2027-C40 Cabinet.


      • Minimum Number of Features per 2027-232: None.
      • Maximum Number of Features per 2027-232: One.
      • Prerequisites: Must select feature #9243 or #9244.
      • Corequisites: Must select feature #9226 on 2027-C40.
      • Compatibility Conflicts: None.
      • Customer Setup: No.
      • Limitations: None.
      • Plant / Field Installable: Plant install only.

      (#9244) Field Install 2027-232 in 2027-C40


      This feature provides field installation of 2027-140 in a 2027-C40
      Cabinet.


      • Minimum Number of Features per 2027-232: None.
      • Maximum Number of Features per 2027-232: One.
      • Prerequisites: Must select feature #9243 or #9244.
      • Corequisites: Must have sufficient space available in 2027-C40.
      • Compatibility Conflicts: None.
      • Customer Setup: No.
      • Limitations: None.
      • Plant / Field Installable: Initial Plant Order only.


      Special Feature Codes -- Chargeable



      01c670
      SAN32M1 SANtegrity Activation 2027 232 3007 Both
      SAN32M1 SANtegrity Binding 2027 232 3007 Both

      03a673
      SAN32M1 SANtegrity Authentication 2027 232 3018 Both

      09c679
      SAN140M SANtegrity 2027 140 6007 Both
      SAN140M SANtegrity Binding 2027 140 6007 Both

      12a683
      SAN140M SANtegrity Authentication 2027 140 6224 Both

      63c934

      (#3007) SAN32M1 SANtegrity Activation


      (#3007) SAN32M1 SANtegrity Binding



      99a971,983

      (#3018) SAN32M-1 SANtegrity Authentication


      This feature provides the optional SANtegrity Authentication
      activation.


      • Minimum Number of Features per 2027-232: None.
      • Maximum Number of Features per 2027-232: One.
      • Prerequisites: Requires SANtegrity Binding feature #3007.
      • Corequisites: None.
      • Compatibility Conflicts: None.
      • Customer Setup: Yes.
      • Limitations: None.
      • Plant / Field Installable: Both.


      001c1085

      (#6007) SAN140M SANtegrity


      (#6007) SAN140M SANtegrity Binding



      065a1150,1162

      (#6224) SAN140M SANtegrity Authentication


      This feature provides the optional SANtegrity Authentication
      activation.


      • Minimum Number of Features per 2027-140: None.
      • Maximum Number of Features per 2027-140: One.
      • Prerequisites: Requires SANtegrity Binding feature #6007.
      • Corequisites: None.
      • Compatibility Conflicts: None.
      • Customer Setup: Yes.
      • Limitations: None.
      • Plant / Field Installable: Both.


      084,1085c1181,1182

      Feature Exchanges



      Feature Exchanges



      091c1188



      103c1200



      113c1210



      121c1218



      128c1225

       © IBM Corporation 2004.

       © IBM Corporation 2005.

      133a1231,1275















      printable version

        
      email
      E-mail this page
















        
      About IBM

        |  
      Privacy

        |  
      Terms of use

        |  
      Contact