Model 720

Summary of standard features:

• Deskside or rack-mount (4 U) configurations

• 1-way, 2-way, and 4-way SMP design (one 1-way or one or two 2-way processor cards)

• 1-way or 2-way 1.5 GHz or 2-way 1.65 GHz POWER5 64-bit processor
  • No Level 3 (L3) cache with processor feature number 1960; 36 MB L3 cache with processor feature number 1961 and 5262

• 512 MB of DDR-I 266 MHz ECC memory
  • Expandable to 64 GB

• Eight hot-swap disk drive bays -- two four packs
  • Four standard and four optional

• Three media bays:
  • One DVD-ROM (optional)
  • One DVD-RAM (optional)
  • One tape drive (optional)

  Note: Either a DVD-ROM or DVD-RAM is required in a minimum configuration.

• A maximum of five hot-swap PCI-X slots:

  • Four 64-bit, 3.3 volt, 133 MHz (long).

  • One 64-bit, 3.3 volt, 133 MHz (short). This slot can be used to support the Dual Port RIO-2 I/O Hub (#1806).

• One 4-pack disk drive enclosure

• One media backplane

• Integrated:
  • Dual 10/100/1000 Gb Ethernet
  • Ultra320 SCSI controller with dual ports (internal) and optional RAID adapter
  • Service Processor
  • Hot-swap and redundant fans
  • Two USB ports
  • Two serial ports
  • Two HMC ports
  • Two RIO-2 ports

• One Power Supply, 1475 Watt AC, Hot-swap, Base (redundant power optional)

The minimum model 720 configuration must include a processor, memory, power supply, hard disk, a disk drive enclosure, a DVD-ROM or DVD-RAM, a media backplane, a power cord, one or two configuration indicators, and a language group specify. The defaults, if no choice is made, are:

     1-way, 1.5 GHz Processor        (#1960)
     Processor power regulator       (#7876)
     Memory 512 MB memory DIMM       (#1936)
     Power supply, 1475 Watt AC,
     Base                            (#7889)
     Disk drive 36.4 GB hard drive   (#3273) (Prior to 1/25/05)
     Disk drive 73.4 GB hard drive   (#1968) (After 1/25/05)
     4-pack disk drive enclosure     (#6592)
     DVD-ROM                         (#2640)
     Media backplane                 (#7877)
     Configuration indicator         (#7912 for deskside
                                     system; #7914 and #7162
                                     or #7163 for rack-mount system)
     Language group specify          (#9300 or 97xx)
     Power Cord                      (#6458, #6460, #6469-#6479, #6487,
                                     #6488, #6493-#6496)

A keyboard, mouse, graphics adapter, and monitor are available as options.

POWER Hypervisor and Virtual I/O Server (VIOS)

The POWER Hypervisor and Virtual I/O Server technologies allow customers to create partitions in units of less than one CPU (sub-CPU LPARs) and for the same system I/O to be virtually added to these partitions. This optional feature, available for a per processor fee, combines two components:

• Firmware feature to turn on the POWER Hypervisor technologies, including Logical Partitioning (LPAR), Dynamic LPAR and Micro-Partitioning

• Software feature to activate the I/O virtualization

At initial order entry, selecting feature number 1965 will result in the POWER Hypervisor technology being enabled during manufacture. The selection of feature number 1965 will also enable the VIOS software media and publications to be shipped to the customer. However, the VIOS software will not be pre-installed in manufacturing.

When ordering feature number 1965 as an MES, an activation key will be posted on an IBM Web site and the customer must retrieve and install it on the system. The IBM Web site is:

http://www.ibm.com/servers/eserver/openpower/cod

POWER Hypervisor and Virtual I/O Server (VIOS) Limitations (#1965)

• If any processors in a system have the feature number 1965, all active processors must have it.

• Once feature number 1965 is installed in a system, yes. rf it cannot be removed.

• Virtual Ethernet and Virtual Storage are part of feature 1965.

The POWER Hypervisor and VIOS feature is supported by the following levels of the Linux operating systems:

• SUSE LINUX Enterprise Server 9 for POWER, or later
• Red Hat Enterprise Linux AS for POWER Version 3 or later

Reliability, Availability, and Serviceability (RAS)

Reliability, fault tolerance, and data integrity

The reliability of the model 720 system starts with reliable components, devices, and subsystems. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems go through a thorough testing process designed to help ensure highest product quality level.

The model 720 system L3 cache and system memory offer ECC (error checking and correcting) fault-tolerant features. ECC is designed to correct environmentally induced, single-bit, intermittent memory failures and single-bit hard failures. With ECC, the likelihood of memory failures will be substantially reduced. ECC also provides double-bit memory error detection that helps protect data integrity in the event of a double-bit memory failure. System memory also provides 4-bit packet error detection that helps to protect data integrity in the event of a DRAM chip failure. The system bus, I/O bus, and PCI buses are designed with parity error detection.

Memory error correction extensions

The standard memory has single error-correct and double-error detect ECC circuitry that is designed to correct single-bit memory failures. The double-bit detection helps maintain data integrity by detecting and reporting multiple errors beyond what the ECC circuitry can correct. The memory chips are organized such that the failure of any specific memory module only affects a single bit within an ECC word (bit scattering), thus allowing for error correction and continued operation in the presence of a complete chip failure (Chipkill recovery).

The memory also utilizes memory scrubbing and thresholding to determine when spare memory modules within each bank of memory, if available, should be used to replace ones that have exceeded their threshold value (dynamic bit steering).

Redundancy for array self-healing

Although the most likely failure event in a processor is a soft single-bit error in one of its caches, there are other events that can occur, and they need to be distinguished from one another. For the L1, L2, and L3 caches and their directories, hardware and firmware keep track of whether permanent errors are being corrected beyond a threshold. If exceeded, a deferred repair error log is created. Additional run-time availability actions, such as CPU vary off**** or L3 cache line delete, are also initiated.

L1 and L2 caches and L2 and L3 directories on the POWER5 chip are manufactured with spare bits in their arrays that can be accessed via programmable steering logic to replace faulty bits in the respective arrays. This is analogous to the redundant bit steering employed in main storage as a mechanism to avoid physical repair, and is also implemented in POWER5 systems. The steering logic is activated during processor initialization and is initiated by the built-in system-test (BIST) at power-on time.

L3 cache redundancy is implemented at the cache line level. Exceeding correctable error thresholds while running causes a dynamic L3 cache line delete function to be invoked.

Service Processor

A Service Processor included in the 720 gives you an immediate means to diagnose, check status, and sense operational conditions of a remote system, even when the main processor is inoperable.

The Service Processor enables firmware and operating system surveillance, several remote power controls, environmental monitoring, reset, boot features, remote maintenance, and diagnostic activities, including console mirroring. The Service Processor can place calls to report surveillance failures, critical environmental faults, and critical processing faults.

Fault monitoring functions

• BIST (built-in self-test) and POST (power-on self-test) check processor, L3 cache, memory, and associated hardware required for proper booting of the operating system, every time the system is powered on. If a noncritical error is detected or if the errors occur in the resources that can be removed from the system configuration, the booting process is designed to proceed to completion. The errors are logged in the system nonvolatile RAM (NVRAM).

• Disk drive fault tracking can alert the system administrator of an impending disk failure before it impacts customer operation.

• The Linux log (where hardware and software failures are recorded and analyzed by the Error Log Analysis (ELA) routine) warns the system administrator about the causes of system problems. This also enables IBM service representatives to bring along probable replacement hardware components when a service call is placed, thus minimizing system repair time.

Mutual surveillance

The Service Processor can monitor the operation of the hypervisor. It also allows the hypervisor to monitor for Service Processor activity. The Service Processor can take appropriate action, including calling for service, when it detects the hypervisor has lost control. Likewise, the operating system can request a Service Processor reset or repair action, if necessary.

Environmental monitoring functions

• Temperature monitoring increases the fan speed rotation when ambient temperature is above the normal operating range.

• Temperature monitoring warns the system administrator of environmental related-problems (for example, air conditioning and air circulation around the system) so that appropriate corrective actions can be taken before a critical failure threshold is reached. It also performs an orderly system shutdown when the operating temperature exceeds the critical level.

• Fan speed monitoring provides a warning and an orderly system shutdown when the speed is out of operational specification.

• Voltage monitoring provides warning and an orderly system shutdown when the voltages are out of operational specification.

Error handling and reporting

In the unlikely event of system hardware or environmentally induced failure, the system run-time error capture capability systematically analyzes the hardware error signature to determine the cause of failure. The analysis result will be stored in system NVRAM. When the system can be successfully rebooted, either manually or automatically, the error will be reported to the Linux operating system. Error Log Analysis (ELA) can be used to display the failure cause and the physical location of failing hardware.

With the combination of the integrated Service Processor and electronic Service Agent, the system can automatically send out an alert via phone line to a pager or call for service in the event of critical system failure (service processor notification) or a recoverable error (electronic Service Agent notification). A hardware fault will also turn on the two Attention Indicators (one located on the front of the system unit and the other on the rear of the system unit) to alert the user of an internal hardware problem. The indicator may also be set to identify mode by the operator as a tool to allow system identification. For identification, the indicators will flash, whereas the indicator will be on solid when an error condition occurs.

Availability enhancement functions

• The auto-restart (reboot) option, when enabled, can reboot the system automatically following an unrecoverable software error, software hang, hardware failure, or environmentally induced (AC power) failure.

Serviceability

The model 720 is designed for customer setup of the machine and for subsequent addition of most features (adapters/devices).(1) For a fee, IBM Service can perform the installation.

• The model 720 allows customers to replace service parts (Customer Replaceable Unit) if they want to. To accomplish this, the model 720 have incorporated LEDs that will indicate the parts needing to be replaced. These LEDs are manually activated by selecting the component to be replaced at the time of service and manually reset when the service is completed.

• The model 720 allows support personnel to remotely log into a system to review error logs and perform remote maintenance. The model 720 Service Processor enables analysis of a system that will not boot.

• The diagnostics consist of Stand-alone Diagnostics, which can be loaded from the DVD-ROM drive.

• The System Management Services (SMS) error log is accessible from the SMS menu for tests performed through SMS programs. The Service Processor error log is accessible from the Service Processor menu for results of Service Processor tests.

Service Agent

The Service Agent is available at no additional charge. When installed on the IBM eServer OpenPower system, the Electronic Service Agent can enhance IBM's ability to provide the system with maintenance service.

The Service Agent:

• Monitors for recoverable system errors and, if needed, can automatically place a service call to IBM without customer intervention.

• Can help reduce the effect of business disruptions due to unplanned system outages and failures.

• Performs problem analysis on a subset of hardware-related problems and, with customer authorization, can report automatically the results to IBM Service.

The Service Processor

• Monitors for critical unrecoverable system errors and can automatically place a service call to IBM without customer intervention.

• Can help reduce the effect of business disruptions due to unrecoverable critical system outages.

Note: (1) Indicates that this RAS function is only available for a Linux operating system running the 2.6 kernel.
Back to top
 

Models

Model Summary Matrix Model Processor Type Clock Rate System Memory Internal Storage Slots/Bays 720 POWER5 1.5 and 1.65 GHz 512 MB/64 GB 36.4 GB/1174.4 GB 5 slots/7 bays standard with additional 4 optional bays Customer Setup (CSU) Yes. Devices Supported The following external machine types are supported on the indicated models for MT 9124. This list is not all inclusive. Many devices are supported through standard ports. Please refer to the sales manual of the external machine type and the list of supported devices in the appropriate section of the sales manual for further attach support information. |7| X = SUPPORTED DEVICE |2| |0| MT-MOD | | DESCRIPTION ---------|-|----------------------------------------- ---------+-+--------SWITCH--------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2031-016 |X| McDATA Model 016 Departmental ES-3032 Fabric Switch 2031-032 |X| McDATA Model 032 Departmental ES-3032 Fabric Switch 2031-216 |X| McData ES-3216 Fabric Switch 2031-224 |X| McData IBM 2031 Model 224 Fabric Switch 2031-232 |X| McData ES-3232 Fabric Switch 2031-L00 |X| McDATA Model L00 ES-1000 Loop Switch 2032-001 |X| McDATA ED-5000 Enterprise Fibre Channel Switch 2032-064 |X| McDATA Model 064 Enterprise Fibre Channel Director 2032-140 |X| 2032 McDATA Intrepid 6140 Enterprise Fibre Channel | | Director Model 140 2032-C40 |X| Cabinet for McDATA Intrepid 6064 Enterprise Fibre Channel | | Director 2042-001 |X| Inrange FC/9000 64-port Fibre Channel Director 2042-128 |X| Inrange FC/9000 128-port Fibre Channel Director 2042-256 |X| INRANGE FC/9000-256 FC Director 2061-020 |X| Cisco Systems MDS 9120 Fabric Switch (IBM Resell) 2061-040 |X| Cisco Systems MDS 9140 Fabric Switch (IBM Resell) 2062-D01 |X| Cisco MDS-9216 Multilayer Fabric Switch 2062-D07 |X| Cisco MDS 9509 Multilayer Director Switch (Data Center | | Model) 2062-T07 |X| Cisco 9509 Multilayer Director Switch (Telecom Model - DC | | Power) 2109-F16 |X| IBM TotalStorage SAN Switch Model M16 2109-F32 |X| TotalStorage SAN Switch - 2109 Model F32 2109-M12 |X| IBM TotalStorage SAN Switch Model M12 2109-M14 |X| IBM TotalStorage SAN Switch Model M14 2109-S08 |X| IBM SAN Fibre Channel Switch Model S08 2109-S16 |X| IBM SAN Fibre Channel Switch Model S16 3534-F08 |X| IBM TotalStorage Storage Area Network (SAN) Model F08 | | ---------+-+--------DISK----------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 1722-60U |X| FAStT600 Storage Server 1740-1RU |X| TotalStorage FAStT EXP700 Storage Expansion Unit 1742-1RU |X| TotalStorage FAStT700 Storage Server 1742-90U |X| FAStT900 Storage Server 2104-DU3 |X| Expandable Storage Plus Model DU3 2104-TS4 |X| IBM TOTALSTORAGE EXPANDABLE STORAGE PLUS U320 MODELS TS4 2104-TU3 |X| Expandable Storage Plus Model TU3 2105-800 |X| TotalStorage Enterprise Storage Server Model 800 2105-F10 |X| IBM Enterprise Storage Server Model F10 2105-F20 |X| IBM Enterprise Storage Server Model F20 3542-2RU |X| IBM FAStT200 Storage Server Model 2RU 3542-2RX |X| IBM FAStT200 Storage Server Model 2RU (EMEA) 3552-1RU |X| IBM TotalStorage FAStT500 Storage Server 3552-1RX |X| IBM TotalStorage FAStT500 Storage Server (EMEA) 3560-1RU |X| IBM TotalStorage FAStT EXP500 Storage Expansion Unit 3560-1RX |X| IBM TotalStorage FAStT EXP500 Storage Expansion Unit | | (EMEA) 7204-419 |X| IBM 18.2 GB External Disk Drive Model 419 7204-518 |X| IBM 7204 18 GB External Disk Drive 7204-536 |X| IBM 7204 36 GB External Disk Drive 7204-573 |X| IBM 7204 External Disk Drive Model 573 | | ---------+-+--------DISPLAYS------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 7310-C03 |X| IBM 7310 Model C03 Hardware Management Console 7310-CR2 |X| IBM 7310 Model CR2 Hardware Management Console 7316-TF3 |X| IBM 7316-TF3 Rack Mounted Flat Panel Display | | ---------+-+--------STORAGE NETWORK DEVICES---------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 1710-10U |X| IBM 1710 TotalStorage FAStT EXP100 Storage Expansion Unit 2105-750 |X| IBM TotalStorage Enterprise Storage Server Model 750 2145-4F2 |X| IBM TotalStorage SAN Volume Controller Storage Engine 2146-V1A |X| IBM TotalStorage 2146 SAN Integration Server | | ---------+-+--------SCSI DEVICES--------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2104-DS4 |X| IBM TOTALSTORAGE EXPANDABLE STORAGE PLUS U320 MODELS DS4 7210-020 |X| IBM CR-ROM Model 020 7210-025 |X| 4.7GB DVDRAM Drive | | ---------+-+--------TAPE----------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 3494-B10 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B10 3494-B18 |X| IBM Magstar Virtual Tape Server Model B18 3494-B20 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B20 3494-D10 |X| IBM TotalStorage Enterprise Tape Drive Expansion Model D10 3494-D12 |X| IBM Magstar Tape Library Model D12 3494-D14 |X| IBM TotalStorage Enterprise Tape Drive Expansion Model D14 3494-D22 |X| IBM TOTALSTORAGE ENTERPRISE AUTOMATED TAPE LIBRARY | | 3494-D22 3494-D24 |X| IBM TOTALSTORAGE ENTERPRISE AUTOMATED TAPE LIBRARY | | 3494-D24 3494-L10 |X| IBM TotalStorage Enterprise Tape Library Model L10 3494-L14 |X| IBM TotalStorage Enterprise Tape Library Model L14 3494-HA1 |X| IBM TotalStorage Enterprise High Availability Tape Frame | | Model HA1 3494-L12 |X| IBM Magstar Tape Library Model L12 3494-L22 |X| IBM TOTALSTORAGE ENTERPRISE AUTOMATED TAPE LIBRARY | | 3494-L22 3580-H23 |X| IBM Total Storage Ultrium 2 Tape Drive Model H23 3580-L23 |X| IBM Total Storage Ultrium 2 Tape Drive Model L23 3581-L23 |X| IBM Total Storage Ultrium Tape Autoloader 3581 Model L23 3581-L23 |X| IBM Total Storage Ultrium Tape Autoloader 3581 Model L23 3581-F28 |X| IBM Total Storage Ultrium Tape Autoloader 3581 Model F28 3581-H23 |X| IBM TOTALSTORAGE ULTRIUM TAPE AUTOLOADER 3581 MODELS H23 3581-L28 |X| IBM Total Storage Ultrium Tape U2 Autoloader 3582-L23 |X| IBM Total Storage Ultrium Tape Autoloader 3582 Model L23 3583-L18 |X| Linear Tape Open (LTO) Tape Library - Scalable 3583-L36 |X| Linear Tape Open (LTO) Tape Library - Scalable 3583-L72 |X| Linear Tape Open (LTO) Tape Library - Scalable 3584-D32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Base Frame 3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1 3584-L32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Expansion | | Frame 3584-L22 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library Model L22 3584-L52 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library Model L52 3590-B11 |X| IBM Magstar Tape Subsystem Model B11 3590-B1A |X| IBM Magstar Tape Subsystem Model B1A 3590-C12 |X| IBM Magstar Silo Compatible Frame Model C1A 3590-E11 |X| Magstar Tape Subsystem 3590-E1A |X| Magstar Tape Subsystem 3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11 3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A 3592-C20 |X| IBM TOTALSTORAGE SILO COMPATIBLE TAPE DRIVE FRAME 3592-C20 3592-J1A |X| IBM TOTALSTORAGE ENTERPRISE TAPE DRIVE 3592 MODEL J1A 7205-440 |X| IBM 7205 Digital Linear Tape Library Model 440 7205-550 |X|External Digital Linear Tape Drive 7206-220 |X| IBM 20GB External 4MM DDS-4 Tape Drive Model 220 7206-VX2 |X| IBM 7206-VX2 External Tape Drive 7206-336 |X| IBM 36GB External Tape Drive Model 336 7207-122 |X| IBM 4GB External SLR5 QIC Tape Drive Model 122 7207-330 |X| 7207-330 IBM Tape Drive 7208-341 |X| IBM 20GB External 8MM Tape Drive Model 341 7208-345 |X| IBM 7208 Model 345 60GB External 8MM Tape Drive 7212-102 |X| STORAGE DEVICE ENCLOSURE 7332-220 |X| IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220 7334-410 |X| IBM 7334 Model 410 8MM Tape Library (MAM2 4x30) 7337-360 |X| IBM 7337 Digital Linear Tape Library Model 360 | | ---------+-+--------EXPANSION CABINETS--------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2032-C36 |X| McDATA Model 0C3 FC-512 Cabinet for McDATA Directors and | | Fabric Switch 2042-C40 |X| Inrange 40U Cabinet 2109-C36 |X| IBM TotalStorage San Cabinet C36 7014-S00 |X| 1.6 Meter System Rack - 32U 7014-T00 |X| 1.8 Meter System Rack - 36U 7014-T42 |X| 2.0 Meter System Rack - 42U 7311-D20 |X| IBM 7311 Model D20 Rack-Mounted Expansion Drawer | | ---------+-+--------SERVICES------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 0463-001 |X| Software Customization (CCS) 0463-002 |X| Center for Customized Solutions (CCS) Feature Availability Matrix The following feature availability matrix for MT 9124 uses the letter "A" to indicate features that are available and orderable on the specified models. "S" indicates a feature that is supported on the new model during a model conversion; these features will work on the new model, but additional quantities of these features cannot be ordered on the new model; they can only be removed. "N" indicates that the feature is not supported on the new model and must be removed during the model conversion. As additional features are announced, supported, or withdrawn, this list will be updated. Please check with your Marketing Representative for additional information. |7| A = AVAILABLE S = SUPPORTED |2| N = NOT SUPPORTED, MUST BE REMOVED |0| FEAT/PN | | DESCRIPTION --------|-|----------------------------------------- 0050 |A| IBM SystemSeller Indicator 0983 |A| Made in America Indicator 0986 |A| CCS Customer Service Specify (US) 1806 |A| Dual Port RIO-2 I/O Hub 1809 |A| GX Dual-port 4x IB HCA 1820 |A| PCI-X Dual-port 4x IB HCA 1835 |A| 3 meter 4x IB Cable 1836 |A| 8 meter 4x IB Cable 1839 |A| 1.5 meter 4x IB Cable 1912 |A| PCI-X DDR Dual Channel Ultra320 SCSI Adapter 1907 |A| Dual Channel SCSI RAID Enablement Daughter Card 1936 |A| 512MB (2x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM 1937 |S| 1024MB (4x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM 1938 |S| 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM 1940 |S| 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM 1942 |S| 8192MB (4x2048MB) DIMMs, 208-pin, 8NS DDR SDRAM 1943 |A| 2-way 1.5 GHz POWER5 Processor Card for Express Product | | Offerings 1944 |A| 2-Way 1.65 GHz POWER5 Processor Card for Express Product | | Offerings 1945 |S| 16GB (4x4096MB) DIMMs, 208-pin, 266 MHz DDR Stacked SDRAM 1949 |A| 1024MB (2x512MB) DIMMs, 208-pin, 266 MHz DDR SDRAM 1950 |A| 2048MB (2x1024MB) DIMMs, 208-pin, 266 MHz DDR SDRAM 1951 |A| 4096MB (2x2048MB) DIMMs, 208-pin, 266 MHz DDR SDRAM 1952 |A| 8192MB (2x4096MB) DIMMs, 208-pin, 266 MHz DDR SDRAM 1960 |A| 1-way 1.5 GHz POWER5 Processor Card, no L3 Cache, 8 Memory | | DIMM Slots 1961 |A| 2-way 1.5 GHz POWER5 Processor Card, 36 MB L3 Cache, 8 Memory | | DIMM Slots 1965 |A| POWER Hypervisor 1968 |A| 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly 1969 |A| 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly 1970 |A| 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly 1971 |A| 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly 1972 |A| 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly 1973 |A| 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly 1974 |S| PCI-X Dual Channel Ultra320 SCSI Adapter 1975 |A| PCI-X Dual Channel Ultra320 SCSI RAID Adapter 1976 |S| Dual Channel SCSI RAID Enablement Card 1977 |A| 2 Gigabit Fibre Channel PCI-X Adapter 1978 |A| IBM Gigabit Ethernet-SX PCI-X Adapter 1979 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter 1980 |A| POWER GXT135P Graphics Accelerator with Digital Support 1981 |A| 10 Gigabit Ethernet-SR PCI-X Adapter 1982 |A| IBM 10 Gigabit Ethernet-LR PCI-X Adapter 1983 |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter 1984 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter 1985 |S| 10/100 Mbps Ethernet PCI Adapter II 1991 |A| 36/72 4mm Internal Tape Drive 1992 |A| IBM 80/160 GB Internal Tape Drive with VXA Technology 1993 |A| IBM 4.7 GB IDE Slimline DVD-RAM Drive 1994 |A| IDE Slimline DVD-ROM Drive 2114 |A| PCI SCSI Adapter 16-Bit Differential External Y Cable 2118 |A| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M 2425 |A| 2.5M 16-bit SCSI-2 System to System Cable 2456 |A| LC-SC 50 Micron Fiber Converter Cable 2459 |A| LC-SC 62.5 Micron Fiber Converter Cable 2591 |A| External USB 1.44 MB Diskette Drive 2640 |N| IDE Slimline DVD-ROM Drive 2738 |A| 2 Port USB PCI Adapter 2849 |N| POWER GXT135P Graphics Accelerator with Digital Support 2934 |A| Asynchronous Terminal/Printer Cable EIA-232 2936 |A| Asynchronous Cable EIA-232/V.24 3146 |A| RIO-2 (Remote I/O-2) Cable, 1.2M 3147 |A| RIO-2 (Remote I/O-2) Cable, 3.5M 3148 |A| RIO-2 (Remote I/O-2) Cable, 10M 3273 |N| 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly 3274 |N| 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly 3275 |N| 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly 3277 |N| 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly 3278 |N| 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly 3636 |A| L200P Flat Panel Monitor 3637 |A| IBM T541H /L150p 15" TFT Color Monitor 3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable 3639 |S| IBM ThinkVision L170p Flat Panel Monitor 3640 |A| IBM ThinkVision L171p Flat Panel Monitor 3642 |A| ThinkVision L191p Flat Panel Monitor 3752 |A| Service Package 3925 |A| Serial Port Converter Cable, 9-Pin to 25-Pin 3926 |A| Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M 4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15 | | pin D-shell) 4256 |A| Extender Cable - USB Keyboards, 2M 4263 |A| SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media | | Device; Mounting Tray 4267 |A| SCSI Cable, PCI Adapter to Hot-Swap Disks 4273 |A| External SCSI Port Enablement Cable 4691 |S| Rack Status Beacon Cable, Junction Box To Drawer Or Status | | Beacon 4692 |S| Rack Status Beacon Cable, Junction Box Daisy Chain 4693 |S| Rack Status Beacon Junction Box 4962 |S| 10/100 Mbps Ethernet PCI Adapter II 5001 |A| Customer Service Specify 5005 |S| Software Preinstall 5262 |S| 2-Way 1.65 GHz POWER5 Processor Card,, 8 Memory DIMM Slots 5700 |S| IBM Gigabit Ethernet-SX PCI-X Adapter 5701 |S| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter 5703 |S| PCI-X Dual Channel Ultra320 SCSI RAID Adapter 5706 |S| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter 5707 |S| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter 5709 |S| Dual Channel SCSI RAID Enablement Card 5712 |S| PCI-X Dual Channel Ultra320 SCSI Adapter 5716 |S| 2 Gigabit Fibre Channel PCI-X Adapter 5723 |A| 2 Port Asynchronous EIA-232 PCI Adapter 5727 |A| Dual Channel SCSI RAID Enablement Card 5751 |S| IBM 4.7 GB IDE Slimline DVD-RAM Drive 6120 |S| IBM 80/160 GB Internal Tape Drive with VXA Technology 6134 |S| 60/150 GB 16-bit 8mm Internal Tape Drive 6258 |S| 36/72 4mm Internal Tape Drive 6458 |A| Power Cable -- Drawer to IBM PDU, 14-foot, 250V/10A 6460 |A| Power Cord (14-foot), Drawer to OEM PDU, (125V, 15A), | | Plug Type #4 6469 |A| Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), | | United States, Plug Type #5 6470 |A| Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4 6471 |A| Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug | | Type #70 6472 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug | | Type #18 6473 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug | | Type 19 6474 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug | | Type #23 6475 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug | | Type #32 6476 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug | | Type #24 6477 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug | | Type #22 6478 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug | | Type #25 6479 |N| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug | | Type #6 6487 |A| Power Cord (6-foot), To Wall, (250V, 15A), United States, | | Plug Type #5 6488 |A| Power Cord (9-foot) , To Wall/OEM PDU, (125V, 15A or 250V, | | 10A), Plug Type #2 6493 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug | | Type #62 6494 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug | | Type #69 6495 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug | | Type #64 6496 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug | | Type #66 6497 |A| Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #10 6592 |A| Ultra320 SCSI 4-Pack 6593 |A| Ultra320 SCSI 4-Pack for Disk Mirroring 6598 |A| Disk Slot Fillers (Quantity 4) 6651 |A| Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug | | Type #75 6659 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug | | Type #76 6660 |A| Power Cord (14-foot), Drawer To OEM PDU (125V, 15A), Plug | | Type #59 (Denan marking) 6669 |A| Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), | | Plug Type #5 (Denan marking) 6670 |A| Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 | | (Denan marking) 6671 |A| Power Cord (9-foot), Drawer to IBM PDU, 250V/10A 6672 |A| Power Cord (5-foot), Drawer to IBM PDU, 250V/10A 6680 |A| Power Cord (9-foot) , To Wall/OEM PDU, (250V, 10A), Plug | | Type #6, Insulated 6687 |A| Power Cord (6-foot),To Wall, (250V, 15A), Plug Type #5 | | (Denan marking) 7162 |A| IBM Rack-mount Drawer Rail Kit 7163 |S| OEM Rack-mount Drawer Rail Kit 7801 |A| Ethernet Cable, 6M, Hardware Management Console to System | | Unit 7802 |A| Ethernet Cable, 15M, Hardware Management Console to System | | Unit 7876 |A| Processor Power Regulator 7877 |A| Media Backplane 7889 |A| Power Supply, 1475 Watt AC, Hot-swap, Base and Redundant 7912 |A| IBM Deskside Cover Set 7914 |A| IBM Rack-mount Drawer Bezel and Hardware 8800 |A| Quiet Touch Keyboard - USB, Business Black, US English, | | #103P 8801 |A| Quiet Touch Keyboard - USB, Business Black, French, #189 8802 |A| Quiet Touch Keyboard - USB, Business Black, Italian, #142 8803 |A| Quiet Touch Keyboard - USB, Business Black, German | | Austrian, #129 8804 |A| Quiet Touch Keyboard - USB, Business Black, UK English, #166 8805 |A| Quiet Touch Keyboard - USB, Business Black, Spanish, #172 8806 |A| Quiet Touch Keyboard - USB, Business Black, Japanese, #194 8807 |A| Quiet Touch Keyboard - USB, Business Black, | | Brazilian/Portuguese, #275 8808 |A| Quiet Touch Keyboard - USB, Business Black, Canadian | | French, #058 8810 |A| Quiet Touch Keyboard - USB, Business Black, Belgian Dutch, | | #120 8811 |A| Quiet Touch Keyboard - USB, Business Black, | | Swedish/Finnish, #153 8812 |A| Quiet Touch Keyboard - USB, Business Black, Danish, #159 8813 |A| Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442 8814 |A| Quiet Touch Keyboard - USB, Business Black, | | Swiss/French/German, #150F/G 8816 |A| Quiet Touch Keyboard - USB, Business Black, Norwegian, #155 8818 |A| Quiet Touch Keyboard - USB, Business Black, Portuguese, #163 8819 |A| Quiet Touch Keyboard - USB, Business Black, Greek, #319 8820 |A| Quiet Touch Keyboard - USB, Business Black, Hebrew, #212 8821 |A| Quiet Touch Keyboard - USB, Business Black, Hungarian, #208 8823 |A| Quiet Touch Keyboard - USB, Business Black, Polish, #214 8825 |A| Quiet Touch Keyboard - USB, Business Black, Slovakian, #245 8826 |A| Quiet Touch Keyboard - USB, Business Black, Czech, #243 8827 |A| Quiet Touch Keyboard - USB, Business Black, Turkish, #179 8829 |A| Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171 8830 |A| Quiet Touch Keyboard - USB, Business Black, Arabic, #238 8833 |A| Quiet Touch Keyboard - USB, Business Black, Korean, #413 8834 |A| Quiet Touch Keyboard - USB, Business Black, Chinese #467 8835 |A| Quiet Touch Keyboard - USB, Business Black, French | | Canadian, #445 8836 |A| Quiet Touch Keyboard - USB, Business Black, Thai, #191 8838 |A| Quiet Touch Keyboard - USB, Business Black, Russian, #443 8839 |A| Quiet Touch Keyboard - USB, Business Black, | | Yugoslavian/Latin, #105 8840 |A| Quiet Touch Keyboard - USB, Business Black, US English | | (EMEA), #103P 8841 |A| Mouse - Business Black with Keyboard Attachment Cable 9004 |A| Southern Hemisphere Designator for Monitors 9169 |A| Factory Integration Specify 9300 |A| Language Group Specify - US English 9351 |A| Express Product Offering 91241D1 9352 |A| Express Product Offering 91241D2 9353 |A| Express Product Offering 91241D3 9354 |A| Express Product Offering 91241D4 9355 |A| Express Product Offering 91241D5 9700 |A| Language Group Specify - Dutch 9703 |A| Language Group Specify - French 9704 |A| Language Group Specify - German 9705 |A| Language Group Specify - Polish 9707 |A| Language Group Specify - Portuguese 9708 |A| Language Group Specify - Spanish 9711 |A| Language Group Specify - Italian 9712 |A| Language Group Specify - Canadian French 9714 |A| Language Group Specify - Japanese 9715 |A| Language Group Specify - Traditional Chinese (Taiwan) 9716 |A| Language Group Specify - Korean 9718 |A| Language Group Specify - Turkish 9719 |A| Language Group Specify - Hungarian 9720 |A| Language Group Specify - Slovakian 9721 |A| Language Group Specify - Russian 9722 |A| Language Group Specify - Simplified Chinese (PRC) 9724 |A| Language Group Specify - Czech 9725 |A| Language Group Specify - Romanian 9727 |A| Language Group Specify - Slovenian   Model Conversions None Back to top   Technical Description Physical Specifications Operating Environment Limitations Hardware Requirements Software Requirements Physical Specifications Deskside/Desktop: Width: 201 mm (07.9 in) Depth: 779 mm (30.7 in) Height: 533 mm (21.1 in) Rack-mount: Width: 437 mm (17.2 in) Depth: 686 mm (27.0 in) Height: 178 mm (7.0 in) Operating Environment Temperature: (non-operating) 5 to 45 degrees C (41 to 113 F). Recommended temperature (operating) 5 to 35 degrees C (41 to 95 F) Relative humidity: 8 % to 80 % Maximum wet bulb: (power off) 27 degrees C (80 F) Operating voltage: 1-2 way 100 to 127 or 200 to 240 V ac (auto-ranging): 4-way 200 to 240 V ac Operating frequency: 47/63 Hz Power consumption: 1100 watts (maximum) Thermal output: 3,754 Btu/hour (maximum) Power source loading: 1.158 kVA (maximum configuration) Maximum altitude: 3,048 m (10,000 ft) Noise level and sound power Sound Power: model 720 rack-mount -- 6.0 Bels Idle/6.0 Bels Operating Sound Power: model 720 deskside -- 6.6 Bels Idle/6.8 Bels Operating EMC conformance classification This equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution. U.S.A.: FCC Class A for Deskside/Desktop; FCC Class A for Rack Mount Europe: CISPR 22 Class A for Deskside/Desktop; CISPR 22 Class A for Rack Mount Japan: VCCI-A for Deskside/Desktop; VCCI-A for Rack Mount Korea: Korean Requirement Class A for Deskside/Desktop; Class A Rack Mount China: People's Republic of China commodity inspection law Homologation -- Telecom Environmental Testing (Safety and EMC) Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude. This IBM OpenPower model and applicable features meet the environmental testing requirements of the country telecom and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom regulatory authority. Product safety/country testing/certification UL 60950-1 First Edition 1950 Underwriters Laboratory, Safety Information CSA C22.2 No. 60950-1-03 First Edition EN60950 European Norm IEC 60950-1, Edition 1, and 60950 Third Edition International Electrotechnical Commission, Safety Information Nordic deviations to IEC-950 1st Edition, as outlined in document EMKO-TSE(05-SEC) 200/93 General Requirements The product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration). Limitations System External SCSI Port Enablement Cable: When feature number 4273 is installed in the system, a second 4-pack disk enclosure (second #6592 or first #6593) cannot be installed. One PCI-X slot is required. The maximum cable length supported by #4273 is 6 meters. When an HMC is connected to the system, the integrated serial ports are rendered nonfunctional. In this case, the customer must install an asynchronous adapter for serial port usage. Integrated serial ports are not supported when the HMC ports are connected to a Hardware Management Console. Either the HMC ports or the integrated serial ports can be used, but not both. The integrated serial ports are supported only for modem and async terminal connections. Any other applications using serial ports require a serial port adapter to be installed in a PCI slot. The integrated serial ports do not support HACMP configurations. Processor cards A minimum of one processor is required on an order with a maximum of four processors on two processor cards. Only one 1-way processor card (#1960) is allowed in a system. A 1-way processor (#1960) cannot be used with a 2-way processor (#1961 or #5262). One or two 2-way processor cards (#1961 or #5262) may be installed in a system. Processor cards (#1960, #1961, and #5262) cannot be mixed in a system. Processor power regulator (#7876) is required for each processor card installed in the system. Each processor card contains 32 KB of data cache and 64 KB of instruction cache. Each processor card contains 1.9 MB of Level 2 cache. Power Supply The base machine contains one ac power supply with a second available for redundancy. Redundant power supply/Fans Second optional AC (#7889) power supply Redundant fans standard Power Cords On a 4-way OpenPower 720 system (2 x #5262), a 220V power cord is required. Cannot use feature #6460, #6470, #6471, or #6488. System memory A maximum of 64 GB of system memory is available with two processor cards installed in the system. Eight memory DIMM slots are on a processor card. The maximum system memory with one processor card is 32 GB. A minimum of 512 MB of memory is required when processor feature number 1960 is installed in the system. A minimum of 1 GB of memory is required when processor feature number 1961 or 5262 is in the system. Memory can be installed in pairs (feature numbers 1936, 1949, 1950, 1951, and 1952) or quads (feature numbers 1937, 1938, 1939, 1940, 1942, and 1945). Memory feature numbers may be mixed within a system. Figure 1. Memory features Feature Minimum Maximum Feature number quantity quantity ======= ======= ======== ======== 512 MB 1936 0 2 (2 x 256 MB DIMMs) 1024 MB 1937 0 4 (4 x 256 MB DIMMs) 2048 MB 1938 0 4 (4 x 512 MB DIMMs) 4096 MB 1940 0 4 (4 x 1024 MB DIMMs) 8192 MB 1942 0 4 (4 x 2048 MB DIMMs) 16384 MB 1945 0 4 (4 x 4096 MB DIMMs) 1024 MB 1949 0 8 (2 x 512 MB DIMMs) 2048 MB 1950 0 8 (2 x 1024 MB DIMMs) 4096 MB 1951 0 8 (2 x 2048 MB DIMMs) 8192 MB 1949 0 8 (2 x 4096 MB DIMMs) I/O Drawers Model 720 systems can be attached to the 7311-D20 I/O drawers using the standard RIO-2 ports and/or the optional Dual Port RIO-2 I/O Hub (#1806): Maximum of 8 drawers per system Maximum of 2 RIO loops PCI card slots The model 720 has a maximum of five hot-plug PCI-X slots. Slots 1 to 4 are long, 64-bit, 3.3 V, and run at 133 MHz. Slot 5 is physically shared by either a PCI-X adapter or the Dual Port RIO-2 I/O Hub (#1806). PCI-X adapter installed in slot 5 must be a short card. Graphics Adapters Graphics adapter, keyboard, and mouse are not required in the minimum configuration. The maximum number of graphics adapters supported in the model 720 is two. I/O Adapters Feature number 5709 is not plugged into a slot. Refer to Figure 2 for additional I/O adapter limitations. Feature #1806 requires that two processor cards be installed in the system. The adapter installed in slot 5 must be short. Figure 2. I/O adapter features Feature Max Slot I/O Adapter number qty priority Size =============== ========= === =========== ==== 2-port USB PCI 2738 2 3,1,4,2,5 Short GXT135P Graphics Accelerator 2849/1980 2 3,1,4,2,5 Short 10/100 Ethernet 4962/1985 5 3,1,4,2,5 Short Gigabit Ethernet 5700/1978 5 3,4,1,5,2 Short 10/100/1000 Ethernet 5701/1979 5 3,4,1,5,2 Short PCI-X Ultra320 SCSI RAID 5703/1975 4 3,1,4,2 Long 2-port 10/100/1000 Ether. 5706/1983 5 3,4,1,5,2 Short 2-port Gigabit Ether.-SX 5707/1984 5 3,1,4,5,2 Short SCSI RAID Enablement Card 5709/1976 1 N/A N/A PCI-X Ultra320 SCSI 5712/1974 5 3,1,4,2,5 Short 2 Gb Fibre Channel PCI-X 5716/1977 5 3,1,4,2,5 Short   Storage devices/bays The model 720 has two DASD 4-packs in the system, one mandatory (#6592) and one optional (#6592 or #6593). Media bays can contain an optional DVD-ROM (#2640 or follow-on) in bays 2 and 3, an optional DVD-RAM (#5751 or follow-on) in bay 2 and 3, and an optional tape drive (#6120, #6134, #6258, or follow-ons) in bay 4. Either a DVD-ROM (#2640) or DVD-RAM (#5751) must be selected. If optional tape drive feature number 6258, 6120 or 6134 is installed, cable feature number 4263 is required. Cable feature number 4263 requires 6258, 6120 or 6134 to be installed. The first optical device can only be installed in the top slimline bay (bay D2) in the rack configuration. Figure 3. Storage device features Maximum Feature Device quantity Bay number ========================= ======== ========= ========= DVD-ROM (IDE) 2 Media 2/3 2640/1994 DVD-RAM (IDE) 2 Media 2/3 5751/1993 4-mm 36/72 GB Tape (LVD) 1 Media 4 6258/1991 8-mm 60/150 GB Tape (LVD) 1 Media 4 6134 8-mm 80/160 GB Tape (LVD) 1 Media 4 6120/1992 36.4 GB 10,000 rpm 8 DASD 1-8 3273 Ultra320 SCSI Disk, Hot-swap 36.4 GB 15,000 rpm Ultra320 SCSI Disk, Hot-swap 8 DASD 1-8 3277/1970 73.4 GB 10,000 rpm 8 DASD 1-8 3274/1968 Ultra320 SCSI Disk, Hot-swap 73.4 GB 15,000 rpm 8 DASD 1-8 3278/1971 Ultra320 SCSI Disk, Hot-swap 146.8 GB 10 K rpm, 8 DASD 1-8 3275/1969 Ultra320 SCSI Disk, Hot-swap Ultra320 SCSI 4-pack 2 System Planar 6592 Ultra320 SCSI 4-pack for 1 System Planar 6593 disk mirroring Linux operating system For customers installing SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, refer to the following Web site for information on supported I/O adapters and storage devices: http://www.ibm.com/servers/eserver/openpower Hardware Requirements Model 720 minimum system configuration The model 720 server can be configured to incorporate up to two 2-way processors, 64 GB of system memory, five PCI adapters, and multiple media devices, as desired. This flexibility is made available through the many optional features for the model 720. Each model 720 must include a minimum of the following items: One system Central Electronics Complex (CEC) enclosure with the following items: One power cord (#6458, #6460, #6469-#6479, #6487, #6488, #6493-#6498) One language group, specify (#9300 or #97xx) One processor power regulator (#7876) One processor card -- chosen from: POWER5 processor -- 1-way 1.5 GHz, no L3 cache (#1960) POWER5 processor -- 2-way 1.5 GHz, 36 MB L3 cache (#1961) POWER5 processor -- 2-way 1.65 GHz, 36 MB L3 Cache (#5262) Choose 512 MB minimum memory from: 512 MB Memory (2 x 256 MB DIMMs) (#1936) 1024 MB Memory (4 x 256 MB DIMMs) (#1937) 2048 MB Memory (4 x 512 MB DIMMs) (#1938) 4096 MB Memory (4 x 1024 MB DIMMs) (#1940) 8192 MB Memory (4 x 2048 MB DIMMs) (#1942) 16384 MB Memory (4 x 4096 MB DIMMs) (#1945) 1024 MB Memory (2 x 512 MB DIMMs) (#1949) 2048 MB Memory (2 x 1024 MB DIMMs) (#1950) 4096 MB Memory (2 x 2048 MB DIMMs) (#1951) 8192 MB Memory (2 x 4096 MB DIMMs) (#1952) Choose disk drive from: 36.4 GB Ultra320 10,000 rpm (#3273) 36.4 GB Ultra320 15,000 rpm (#3277 or #1970) 73.4 GB Ultra320 10,000 rpm (#3274 or #1968) 73.4 GB Ultra320 15,000 rpm (#3278 or #1971) 146.8 GB Ultra320 10,000 rpm (#3275 or #1969) Choose media devices from: DVD-ROM (#2640 or #1994) DVD-RAM (#5751 or #1993) One 4-pack disk drive enclosure (#6592) One Power Supply, 1475 Watt AC, Hot-swap, Base (#7889) One Media Backplane (#7877) Configuration indicator #7912 for deskside system with IBM cover set #7914 for rack-mount system with IBM bezel #7162 for rack-mount system with IBM rack-mounting rails #7163 for rack-mount system with OEM rack-mounting rails Note: If feature number 7914 is selected, either feature number 7162 or 7163 must be selected. RAID Internal RAID is available on the model 720. A number of options are available to customers wanting to install RAID on their systems: Install feature number 5709, the Dual Channel SCSI RAID Enablement Card. Install four disk drives in feature number 6592, the Ultra320 SCSI 4-pack enclosure. This will allow RAID capabilities within a single 4-pack of DASD. Install feature number 5709. Install a second feature number 6592. This will allow RAID capabilities across two 4-packs of DASD. Install feature number 5709. Install feature number 6593, the Ultra320 SCSI 4-Pack Enclosure for Disk Mirroring. Install feature number 5703, the PCI-X Dual Channel Ultra320 SCSI RAID Adapter. Install feature number 4267, the SCSI Cable which connects the PCI Adapter to feature number 6593. Software Requirements SUSE LINUX Enterprise Server 9 for POWER, or later or Red Hat Enterprise Linux AS for POWER Version 3 or later (planned availability date: September 30, 2004) Note: Information on features and external devices supported by Linux on the model 720 can be found at: http://www.ibm.com/servers/eserver/openpower/ The system is capable of running other operating systems, including AIX, if enabled. Upon request, IBM may consider RPQs for installed systems to enable that capability. Back to top   Publications The following information will be shipped with the 9124-720. Additional copies are available. To order, contact your IBM representative. Title Order number ---------------------------------------------- ------------ IBM eServer Hardware Information Center CD-ROM SK3T-8159 IBM eServer Safety Information G229-9054 Start here for IBM eServer SA41-5156 IBM Statement of Limited Warranty Z125-4753 IBM License Agreement for Machine Code Z125-5468   Hardware books such as installation guides, user's guides, and service guides are available to download or view at: www.ibm.com/servers/library/infocenter The Publication Notification System (PNS) is available by order number/ product number. Customers currently subscribing to PNS will automatically receive notifications by e-mail. Customers who want to subscribe, can visit the PNS Web site location at: http://service5.boulder.ibm.com/pnsrege.nsf/ WebMessages/WelcomeENUS The publications listed on the notification can be ordered by calling the Publication Support Group in Raleigh at 800-879-2755, option 1. The IBM Publications Center Portal: http://www.ibm.com/shop/publications/order The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. Furthermore, a large number of publications are available online in various file formats, which can currently be downloaded free of charge. Note: PNS subscribers most often order their publications via the Publication Center. Back to top   Features -- Specify/Special/Exchange No Charge Specify Codes Special Feature Codes -- Chargeable Feature Exchanges No Charge Specify Codes Specify Features for Machine Type 9124 LANGUAGES (#9300) - Language Group Specify - US English (#9700) - Language Group Specify - Dutch (#9703) - Language Group Specify - French (#9704) - Language Group Specify - German (#9705) - Language Group Specify - Polish (#9707) - Language Group Specify - Portuguese (#9708) - Language Group Specify - Spanish (#9711) - Language Group Specify - Italian (#9712) - Language Group Specify - Canadian French (#9714) - Language Group Specify - Japanese (#9715) - Language Group Specify - Traditional Chinese (Taiwan) (#9716) - Language Group Specify - Korean (#9718) - Language Group Specify - Turkish (#9719) - Language Group Specify - Hungarian (#9720) - Language Group Specify - Slovakian (#9721) - Language Group Specify - Russian (#9722) - Language Group Specify - Simplified Chinese (PRC) (#9724) - Language Group Specify - Czech (#9725) - Language Group Specify - Romanian (#9727) - Language Group Specify - Slovenian POWER (#7889) - Power Supply, 1475 Watt AC, Hot-swap, Base and Redundant MISCELLANEOUS (#0050) - IBM SystemSeller Indicator (#0986) - CCS Customer Service Specify (US) (#5001) - Customer Service Specify (#5005) - Software Preinstall (#9169) - Factory Integration Specify (#9351) - Express Product Offering 91241D1 (#9352) - Express Product Offering 91241D2 (#9353) - Express Product Offering 91241D3 (#9354) - Express Product Offering 91241D4 (#9355) - Express Product Offering 91241D5 SPECIFY CODES (#9004) - Southern Hemisphere Designator for Monitors LINECORDS (#6671) - Power Cord (9-foot), Drawer to IBM PDU, 250V/10A (#6672) - Power Cord (5-foot), Drawer to IBM PDU, 250V/10A Special Feature Codes -- Chargeable Special Features - Initial Orders ADMINISTRATIVE (#0983) - Made in America Indicator PROCESSORS (#1943) - 2-way 1.5 GHz POWER5 Processor Card for Express Product Offerings (#1944) - 2-Way 1.65 GHz POWER5 Processor Card for Express Product Offerings (#1960) - 1-way 1.5 GHz POWER5 Processor Card, no L3 Cache, 8 Memory DIMM Slots Special Features - Plant and/or Field Installable ADAPTERS (#1806) - Dual Port RIO-2 I/O Hub (#1809) - GX Dual-port 4x IB HCA (#1820) - PCI-X Dual-port 4x IB HCA (#1907) - Dual Channel SCSI RAID Enablement Daughter Card (#1912) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter (#1974) - PCI-X Dual Channel Ultra320 SCSI Adapter (#1975) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#1976) - Dual Channel SCSI RAID Enablement Card (#1977) - 2 Gigabit Fibre Channel PCI-X Adapter (#1980) - POWER GXT135P Graphics Accelerator with Digital Support (#1978) - IBM Gigabit Ethernet-SX PCI-X Adapter (#1979) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#1981) - 10 Gigabit Ethernet-SR PCI-X Adapter (#1982) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter (#1983) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#1984) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#1985) - 10/100 Mbps Ethernet PCI Adapter II (#2738) - 2 Port USB PCI Adapter (#2849) - POWER GXT135P Graphics Accelerator with Digital Support (#4962) - 10/100 Mbps Ethernet PCI Adapter II (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5709) - Dual Channel SCSI RAID Enablement Card (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter (#5723) - 2 Port Asynchronous EIA-232 PCI Adapter (#5727) - Dual Channel SCSI RAID Enablement Card CABLES (#1835) - 3 meter 4x IB Cable (#1836) - 8 meter 4x IB Cable (#1839) - 1.5 meter 4x IB Cable (#2934) - Asynchronous Terminal/Printer Cable EIA-232 (#2936) - Asynchronous Cable EIA-232/V.24 (#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin (#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M (#4263) - SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media Device; Mounting Tray (#4267) - SCSI Cable, PCI Adapter to Hot-Swap Disks (#4273) - External SCSI Port Enablement Cable (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M (#2425) - 2.5M 16-bit SCSI-2 System to System Cable (#2456) - LC-SC 50 Micron Fiber Converter Cable (#2459) - LC-SC 62.5 Micron Fiber Converter Cable (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell) (#4256) - Extender Cable - USB Keyboards, 2M (#7801) - Ethernet Cable, 6M, Hardware Management Console to System Unit (#7802) - Ethernet Cable, 15M, Hardware Management Console to System Unit (#4691) - Rack Status Beacon Cable, Junction Box To Drawer Or Status Beacon (#4692) - Rack Status Beacon Cable, Junction Box Daisy Chain (#3146) - RIO-2 (Remote I/O-2) Cable, 1.2M (#3147) - RIO-2 (Remote I/O-2) Cable, 3.5M (#3148) - RIO-2 (Remote I/O-2) Cable, 10M DISKS (#1968) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (#1969) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (#1970) - 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly (#1971) - 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly (#1972) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly (#1973) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (#3273) - 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (#3274) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (#3275) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (#3277) - 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly (#3278) - 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly (#6598) - Disk Slot Fillers (Quantity 4) DISPLAYS (#3636) - L200P Flat Panel Monitor (#3637) - IBM T541H /L150p 15" TFT Color Monitor (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable (#3639) - IBM ThinkVision L170p Flat Panel Monitor (#3640) - IBM ThinkVision L171p Flat Panel Monitor (#3642) - ThinkVision L191p Flat Panel Monitor KEYBOARDS (#8800) - Quiet Touch Keyboard - USB, Business Black, US English, #103P (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189 (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142 (#8803) - Quiet Touch Keyboard - USB, Business Black, German Austrian, #129 (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English, #166 (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172 (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194 (#8807) - Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275 (#8808) - Quiet Touch Keyboard - USB, Business Black, Canadian French, #058 (#8810) - Quiet Touch Keyboard - USB, Business Black, Belgian Dutch, #120 (#8811) - Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153 (#8812) - Quiet Touch Keyboard - USB, Business Black, Danish, #159 (#8813) - Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442 (#8814) - Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G (#8816) - Quiet Touch Keyboard - USB, Business Black, Norwegian, #155 (#8818) - Quiet Touch Keyboard - USB, Business Black, Portuguese, #163 (#8819) - Quiet Touch Keyboard - USB, Business Black, Greek, #319 (#8820) - Quiet Touch Keyboard - USB, Business Black, Hebrew, #212 (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208 (#8823) - Quiet Touch Keyboard - USB, Business Black, Polish, #214 (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245 (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243 (#8827) - Quiet Touch Keyboard - USB, Business Black, Turkish, #179 (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171 (#8830) - Quiet Touch Keyboard - USB, Business Black, Arabic, #238 (#8833) - Quiet Touch Keyboard - USB, Business Black, Korean, #413 (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese #467 (#8835) - Quiet Touch Keyboard - USB, Business Black, French Canadian, #445 (#8836) - Quiet Touch Keyboard - USB, Business Black, Thai, #191 (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443 (#8839) - Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105 (#8840) - Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P MEMORY (#1936) - 512MB (2x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM (#1937) - 1024MB (4x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM (#1938) - 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM (#1940) - 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM (#1942) - 8192MB (4x2048MB) DIMMs, 208-pin, 8NS DDR SDRAM (#1945) - 16GB (4x4096MB) DIMMs, 208-pin, 266 MHz DDR Stacked SDRAM (#1949) - 1024MB (2x512MB) DIMMs, 208-pin, 266 MHz DDR SDRAM (#1950) - 2048MB (2x1024MB) DIMMs, 208-pin, 266 MHz DDR SDRAM (#1951) - 4096MB (2x2048MB) DIMMs, 208-pin, 266 MHz DDR SDRAM (#1952) - 8192MB (2x4096MB) DIMMs, 208-pin, 266 MHz DDR SDRAM POWER (#7876) - Processor Power Regulator MEDIA DEVICES (#1991) - 36/72 4mm Internal Tape Drive (#1992) - IBM 80/160 GB Internal Tape Drive with VXA Technology (#1993) - IBM 4.7 GB IDE Slimline DVD-RAM Drive (#1994) - IDE Slimline DVD-ROM Drive (#2591) - External USB 1.44 MB Diskette Drive (#2640) - IDE Slimline DVD-ROM Drive (#5751) - IBM 4.7 GB IDE Slimline DVD-RAM Drive (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology (#6134) - 60/150 GB 16-bit 8mm Internal Tape Drive (#6258) - 36/72 4mm Internal Tape Drive LINECORDS (#6470) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4 (#6471) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #70 (#6472) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #18 (#6473) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type 19 (#6474) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug Type #23 (#6475) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #32 (#6476) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #24 (#6477) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #22 (#6478) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #25 (#6479) - Power Cord (9-foot) , To Wall/OEM PDU, (250V, 10A), Plug Type #6 (#6487) - Power Cord (6-foot) ,To Wall, (250V, 15A), United States, Plug Type #5 (#6488) - Power Cord (9-foot) , To Wall/OEM PDU, (125V, 15A or 250V, 10A), Plug Type #2 (#6493) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #62 (#6494) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #69 (#6495) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #64 (#6496) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #66 (#6458) - Power Cable -- Drawer to IBM PDU, 14-foot, 250V/10A (#6460) - Power Cord (14-foot), Drawer to OEM PDU, (125V, 15A), Plug Type #4 (#6469) - Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), United States, Plug Type #5 (#6497) - Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #10 (#6651) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75 (#6659) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76 (#6670) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (Denan marking) (#6680) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated (#6687) - Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #5 (Denan marking) (#6660) - Power Cord (14-foot), Drawer To OEM PDU (125V, 15A), Plug Type #59 (Denan marking) (#6669) - Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), Plug Type #5 (Denan marking) MISCELLANEOUS (#1965) - POWER Hypervisor (#3752) - Service Package (#8841) - Mouse - Business Black with Keyboard Attachment Cable (#6592) - Ultra320 SCSI 4-Pack (#6593) - Ultra320 SCSI 4-Pack for Disk Mirroring (#7912) - IBM Deskside Cover Set (#7877) - Media Backplane PROCESSORS (#1961) - 2-way 1.5 GHz POWER5 Processor Card, 36 MB L3 Cache, 8 Memory DIMM Slots (#5262) - 2-Way 1.65 GHz POWER5 Processor Card,, 8 Memory DIMM Slots RACK RELATED (#4693) - Rack Status Beacon Junction Box (#7162) - IBM Rack-mount Drawer Rail Kit (#7163) - OEM Rack-mount Drawer Rail Kit (#7914) - IBM Rack-mount Drawer Bezel and Hardware Feature Descriptions The following is a list of all feature codes in numeric order. Attributes, as defined in the following feature descriptions, state the interaction of requirements among features. Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features. The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities. The order type defines if a feature is orderable only on initial orders, only on MES orders, on both initial and MES orders, or if a feature is supported on a model due to a model conversion. Supported features cannot be ordered on the converted model, only left on or removed from the converted model. (#0050) IBM SystemSeller Indicator This is a no-charge feature used for administrative purposes by IBM and IBM Business Partners. Attributes provided: None Attributes required: None For 9124-720: (#0050) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#0983) - Made in America Indicator This feature indicates that the product has an American plant of manufacture. Attributes provided: Attributes required: For 9124-720: (#0983) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#0986) CCS Customer Service Specify (US) This feature code specifies that the system will receive special request services from the Center for Customized Solutions (CCS). FC 0986 is available only on the initial plant order. Attributes provided: None Attributes required: None For 9124-720: (#0986) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#1806) Dual Port RIO-2 I/O Hub This feature provides an adapter plus interposer card that connects slot #5 in the system to the system backplane and provides two additional external RIO-2 ports for external connectivity or drawer expansion. Attributes provided: Two external RIO-2 ports Attributes required: Slot #5 on the model 720; two processor cards installed in the system For 9124-720: (#1806) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/openpower Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1809) GX Dual-port 4x IB HCA The #1809, GX Dual-port 4x InfiniBand Host Channel Adapter, provides an adapter plus interposer card that enables the attachment to the Topspin Server Switch models 120 and 270. This adapter plus interposer card plugs into the system backplane (GX slot). Connection to the Topspin Server Switches are accomplished by using the 4x IB Cables. Attributes provided: 2 ports of 4x IB to attach to the Topspin Server Switch models 120 and 270 Attributes required: Available GX slot position For 9124-720: (#1809) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later. Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1820) PCI-X Dual-port 4x IB HCA The #1820, PCI-X Dual-port 4x InfiniBand Host Channel Adapter, provides attachment to the Topspin Server Switch models 120 and 270. Connection to the Topspin Server Switches are accomplished by using the 4x IB Cables. Attributes provided: 2 ports of 4x IB to attach to the Topspin Server Switch models 120 and 270 Attributes required: Available PCI-X slot For 9124-720: (#1820) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later. Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1835) 3 meter 4x IB Cable This 3 meter 4x IB cable is utilized for InfiniBand applications. Attributes provided: 3 meter 4x IB cable Attributes required: 4x IB port For 9124-720: (#1835) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1836) 8 meter 4x IB Cable This 8 meter 4x IB cable is utilized for InfiniBand applications. Attributes provided: 8 meter 4x IB cable Attributes required: 4x IB port For 9124-720: (#1836) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1839) 1.5 meter 4x IB Cable This 1.5 meter 4x IB cable is utilized for InfiniBand applications. Attributes provided: 1.5 meter 4x IB cable Attributes required: 4x IB port For 9124-720: (#1839) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1907) - Dual Channel SCSI RAID Enablement Daughter Card The Dual Channel SCSI RAID Enablement Card (#1907) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select pSeries systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives. To increase the data writing performance, a 40 MByte nonvolatile fast-write cache is provided as a resident part of this feature. The 40 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re- format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL: http://techsupport.services.ibm.com/server/mdownload/ Limitation: Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Attributes provided: Internal disk drives can be configured as a Redundant Array of Independent Disks. There are a number of different RAID levels. The Dual Channel SCSI RAID card (#1907) supports Level 0, 5 and 10. RAID level 0 support fast data transfers and spreads out the individual bits to an array of disk. RAID level 5, includes RAID level 0 functions and adds parity checking for fault tolerances. RAID level 10, support fast data transfers and uses disk mirroring for higher reliability over RAID level 0 and 5. Attributes required: System with supporting integrated SCSI adapter and disk drives. For 9124-720: (#1907) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS for POWER Version 4, or later. Linux - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1912) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter The PCI-X Dual Channel Ultra320 SCSI Adapter (#1912) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X DDR Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. Two VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter. The two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/Web pages for verification of connectivity support with this adapter. The PCI-X Dual Channel Ultra320 SCSI Adapter (#1912) is a native boot adapter with AIX 5L for POWER Version 5.2 with the 5200-07 Recommended Maintenance package (APAR IY67914) or AIX 5L for POWER Version 5.3 with the 5300-03 Recommended Maintenance package (APAR IY71011) or later software in a supported pSeries or RS/6000 systems. The adapter also supports target mode. Limitations: Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. To obtain microcode update go to the following Web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices Attributes required: One available 3.3 volt PCI or PCI-X slot or PCI-X 2.0 DDR slot. For 9124-720: (#1912) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS for POWER Version 4, or later. Linux - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1936) 512MB (2x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM Provides 512MB of system memory with 2 256MB DIMMs. Attributes provided: 512MB of system memory. Attributes required: Two empty memory DIMM positions. For 9124-720: (#1936) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1937) 1024MB (4x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM (No Longer Available as of May 12, 2005) Provides 1024MB of system memory with 4 256MB DIMMs. Attributes provided: 1024MB of system memory. Attributes required: Four empty memory DIMM positions. For 9124-720: (#1937) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1938) 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM (No Longer Available as of May 12, 2005) Provides 2048MB of system memory with 4 512MB DIMMs. Attributes provided: 2048MB of system memory. Attributes required: Four empty memory DIMM positions. For 9124-720: (#1938) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1940) 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM (No Longer Available as of May 12, 2005) Provides 4096MB of system memory with 4 1024MB DIMMs. Attributes provided: 4096MB of system memory. Attributes required: Four empty memory DIMM positions. For 9124-720: (#1940) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1942) 8192MB (4x2048MB) DIMMs, 208-pin, 8NS DDR SDRAM (No Longer Available as of May 12, 2005) Provides 8192MB of system memory with 4 2048MB DIMMs. Attributes provided: 8192MB of system memory. Attributes required: Four empty memory DIMM positions. For 9124-720: (#1942) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1943) - 2-way 1.5 GHz POWER5 Processor Card for Express Product Offerings 2-way processor card with 1.5 GHz POWER5 processor and 36 MB L3 cache. There are 8 DIMM slots on the processor card. Available only with Express Product Offerings. Attributes provided: 2-way processor card, 36 MB L3 cache Attributes required: Minimum requirements for Express Product Offering For 9124-720: (#1943) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#1944) - 2-Way 1.65 GHz POWER5 Processor Card for Express Product Offerings 2-way 1.65 GHz processor card. The two processors share 36MB of L3 cache and 1.9MB of L2 cache. There are 8 DIMM slots on the processocard. Available only with Express Product Offerings. Attributes provided: 2-way processor card Attributes required: One processor card slot. Minimum requirements for Express Product Offering. For 9124-720: (#1944) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#1945) 16GB (4x4096MB) DIMMs, 208-pin, 266 MHz DDR Stacked SDRAM (No Longer Available as of May 12, 2005) Provides 16GB of system memory with 4 4096MB DIMMs. Attributes provided: 16GB of system memory. Attributes required: Four empty memory DIMM positions. For 9124-720: (#1945) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1949) 1024MB (2x512MB) DIMMs, 208-pin, 266 MHz DDR SDRAM Provides 1024MB of system memory with 2 512MB DIMMs. Attributes provided: 1024MB of system memory. Attributes required: Two empty memory DIMM positions. For 9124-720: (#1949) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1950) 2048MB (2x1024MB) DIMMs, 208-pin, 266 MHz DDR SDRAM Provides 2048MB of system memory with 2 1024MB DIMMs. Attributes provided: 2048MB of system memory. Attributes required: Two empty memory DIMM positions. For 9124-720: (#1950) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1951) 4096MB (2x2048MB) DIMMs, 208-pin, 266 MHz DDR SDRAM Provides 4096MB of system memory with 2 2048MB DIMMs. Attributes provided: 4096MB of system memory. Attributes required: Two empty memory DIMM positions. For 9124-720: (#1951) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1952) 8192MB (2x4096MB) DIMMs, 208-pin, 266 MHz DDR SDRAM Provides 8192MB of system memory with 2 4096MB DIMMs. Attributes provided: 8192MB of system memory. Attributes required: Two empty memory DIMM positions. For 9124-720: (#1952) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1960) 1-way 1.5 GHz POWER5 Processor Card, no L3 Cache, 8 Memory DIMM Slots 1-way processor card with 1.5 GHz POWER5 processor and no L3 cache. There are 8 DIMM slots on the processor card. Attributes provided: 1-way processor card, no L3 cache Attributes required: None For 9124-720: (#1960) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#1961) 2-WAY 1.5 GHZ POWER5 Processor Card, 36 MB L3 Cache, 8 Memory DIMM Slots: 2-way processor card with 1.5 GHz POWER5 processor 3 and 36 MB L3 cache. There are 8 DIMM slots on the processor card. Attributes provided: 2-way processor card, 36 MB L3 cache Attributes required: None For 9124-720: (#1961) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1965) POWER Hypervisor and Virtual I/O Server (VIOS) The POWER Hypervisor and Virtual I/O Server technologies allow customers to create partitions in units of less than one CPU (sub-CPU LPARs) and for the same system I/O to be virtually added to these partitions. This optional feature, available for a per processor fee, combines two components: Firmware feature to turn on the POWER Hypervisor technologies, including Logical Partitioning (LPAR), Dynamic LPAR and Micro-Partitioning Software feature to activate the I/O virtualization At initial order entry, selecting feature number 1965 will result in the POWER Hypervisor technology being enabled during manufacture. The selection of feature number 1965 will also cause the VIOS software media and publications to be shipped to the customer. However, the VIOS software will not be pre-installed in manufacturing. When ordering feature number 1965 as an MES, an activation key will be posted on an IBM Web site and the customer must retrieve and install it on the system. The IBM Web site is: http://www.ibm.com/servers/eserver/openpower/cod Attributes provided: POWER Hypervisor technology Attributes required: None For 9124-720: (#1965) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1968) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 67 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 73.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#1968) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1969) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 67 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 146.8 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#1969) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1970) 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2 ms Rotational Speed: 15,000 RPM Maximum Data Transfer Rate: 83 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 36.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#1970) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1971) 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2 ms Rotational Speed: 15,000 RPM Maximum Data Transfer Rate: 83 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 73.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#1971) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1972) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2 ms Rotational Speed: 15,000 RPM Maximum Data Transfer Rate: 107 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 146.8 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#1972) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1973) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 88 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 300 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#1973) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1974) PCI-X Dual Channel Ultra320 SCSI Adapter (No Longer Available as of March 31, 2006) The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.), up to twice the maximum data transfer rate of the previous Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate. The two external ports also provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also the two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or RS/6000 systems. The adapter also supports target mode. Limitations: The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices Attributes required: One available 3.3 volt PCI or PCI-X slot For 9124-720: (#1974) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1975) PCI-X Dual Channel Ultra320 SCSI RAID Adapter The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses. To increase the data writing performance, a 40 MByte non-volitile fast-write cache is provided as a resident part of this adapter. The 40 MByte fast-write cache can provide a significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or external ports) are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrety. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI RAID Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate configured as either a non-array or an array of disks Also the two external ports provide non-array connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. Limitations: The two external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only non-array configuration support. The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal and external SCSI devices Attributes required: One PCI or PCI-X bus slot For 9124-720: (#1975) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1976) Dual Channel SCSI RAID Enablement Card (No Longer Available as of March 31, 2006) The Dual Channel SCSI RAID Enablement Card (#5709) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select pSeries systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives. To increase the data writing performance, a 16 MByte non-volitile fast-write cache is provided as a resident part of this feature. The 16 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrety. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Limitations: Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Internal disk drives to be configured as an array. Attributes required: Systems with supporting integrated SCSI adapter. For 9124-720: (#1976) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1977) 2 Gigabit Fibre Channel PCI-X Adapter The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gps or 2 Gps data rates. The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber onnector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required. Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required order Feature Code #6239-2 Gigabit Fibre Channel PCI-X Adapter Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices. http://www.storage.ibm.com/hardsoft/disk/products.htm Consult with your IBM representative or Business Partner for additional information relative to any third party attachment. Attributes provided: 1 Fibre Channel/FC-AL interface Attributes required: 1 empty PCI or PCI-X slot For 9124-720: (#1977) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1978) IBM Gigabit Ethernet-SX PCI-X Adapter The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connection with throughput on a standard shortwave multimode optical cable which conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot. Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required. Limitation: Half Duplex (HDX) mode is not supported. Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 9124-720: (#1978) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1979) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. Note: For optimum performance, adapter should be placed in a 64 bit PCI-X card slot. Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode. Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 9124-720: (#1979) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1980) POWER GXT135P Graphics Accelerator with Digital Support The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors. Hardware Description 128-bit graphics processor 8-bit CLUT or 24-bit true color 16 MB SDRAM 32-bit PCI interface Universal PCI (5.0v or 3.3v) 1 hardware color map Features Supported Up to approximately 16.7 million colors Rectangular clipping 2 analog monitor outputs at up to 1280 x 1024 resolution 1 analog monitor output at up to 2048 x 1536 resolution 1 digital monitor output at up to 1600 x 1200 resolution 60 to 85 Hz refresh rates (ISO 9241, Part 3) APIs Supported X-Windows and Motif UMS 2.3.0 (no hardware scaling) Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only) Attributes provided: 2D Graphics Attributes required: 1 PCI slot For 9124-720: (#1980) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1981) 10 Gigabit Ethernet-SR PCI-X Adapter Provides 10 Gigabit Ethernet PCI-X based server connections. Supports distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um multimode fiber with 2000MHz km minimum model bandwidth at 850 nm. Adapter connector type is LC. Attributes provided: Provides highend bandwidth for networking Attributes required: Supported on PCI-X slots only For 9124-720: (#1981) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 4, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1982) IBM 10 Gigabit Ethernet-LR PCI-X Adapter Offers 10 Gigabit Ethernet PCI-X based server connections over a maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um single-mode fiber optic cables and uses a SC connector type for connecting into net-work infrastructure components like 10 Gigabit Ethernet switch/router with SC connectors. Attributes provided: 10 Gigabit Ethernet connections Attributes required: Available PCI-X slot For 9124-720: (#1982) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 4, or later. - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1983) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode. Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 9124-720: (#1983) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1984) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required. Limitation: Half Duplex (HDX) mode is not supported. Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 9124-720: (#1984) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1985) 10/100 Mbps Ethernet PCI Adapter II (No Longer Available as of March 31, 2006) The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports: Half / Full Duplex 10/100 Mbps Ethernet interface 10/100 Mbps data rates Auto-negotiation for 10/100 speed and half/full duplex Network boot capability and Network Install Manager (NIM) IEEE 802.3 Ethernet Specification IEEE 802.3u Fast Ethernet Specification After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This support is provided with AIX 5.1 (with appropriate software updates)and later software. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. If you are running with AIX 5.1, to invoke the IP Security function on the adapter, you must obtain AIX 5.1 software updates IY27069 and IY26514 or the 5100-02 Recommended Maintenance package. These updates can be obtained by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD (LCD4-1103-03) dated 4/2002 or later. Note: This IP Security function is not supported with AIX 4.3 software. An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software. Attributes provided: One 10/100 Mbps Ethernet port (connector) Attributes required: One PCI slot For 9124-720: (#1985) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1991) 36/72 4mm Internal Tape Drive The 36/72 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 72 GB - a significant increase in capacity over the previous 20/40 4-mm internal tape drives (when using DDS-4 media). Characteristics Capacity: 36 GB native mode, 70 GB (typical) compression mode Form Factor: 5.25-inch half high Media: IBM 4-mm supports the new DAT72 media Technology: Helical scan, rotating head Operation: Streaming Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression Interface: SCSI-2 (single ended) asynchronous/synchronous Compatability: 4 GB mode (Read/Write), 8 GB compression (Read/Write); 12 GB mode(Read/Write), 24 GB compression (Read/Write), 36 GB mode (Read/Write), 72 GB compression (Read/Write). Note: MES orders are shipped with a black bezel. Attributes provided: 4mm tape capability Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 16-bit address For 9124-720: (#1991) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1992) IBM 80/160 GB Internal Tape Drive with VXA Technology The IBM 80/160 GB Internal Tape Drive with VXA* Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses VXAtape** data cartridges and is compression capable, providing a capacity of up to 160 GB - a significant increase in capacity over the previous internal tape drives. Characteristics Capacity: 80 GB native mode, 160 GB (typical) compression mode Form Factor: 5.25-inch half high Media: uses VXAtape data cartridges Technology: Helical scan, rotating head Operation: Streaming Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression Interface: SCSI-2 (LVD/SE) asynchronous/synchronous Compatability: 80 GB mode (Read/Write), 160 GB compression (Read/Write) Attributes provided: One 80/160 GB internal tape drive Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address For 9124-720: (#1992) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1993) IBM 4.7 GB IDE Slimline DVD-RAM Drive The IBM 4.7 GB IDE Slimline DVD-RAM Drive is an internal tray loading, multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs as well as reading a multitude of other optical media discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs. It is a 12.7mm high Slimline form factor, multi-session capable, DVD-RAM drive which provides state of the art performance. System boot and install functions are supported with CD-ROM and DVD-RAM media. Characteristics: Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diameter; 10.8MB/sec read (8X DVD-ROM); 2.7MB/sec write (2X DVD-RAM) and 2.7MB/sec read (2X DVD-RAM) Interface: Parallel IDE Average Random Access Time: 150ms CD-ROM; 180ms DVD-ROM; 229ms DVD-RAM Buffer Memory: 2MB High-speed burst rate of 16/16/33 MB/second for PIO / MDMA / UDMA transfers respectively Loading tray accommodates both 8cm discs and 12cm discs. Operates in either vertical or horizontal position Reads multi-session discs Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs. Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB double sided DVD-RAM media Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio Limitations: DVD video is not supported. Attributes provided: One 4.7GB IDE Slimline DVD-RAM Drive Attributes required: One IDE 12.7mm high media bay For 9124-720: (#1993) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1994) IDE Slimline DVD-ROM Drive The 8X/24X(max) Slimline IDE DVD-ROM Drive is an internal tray loading DVD-ROM drive providing up to 3600KB/sec (CD-ROM) and 10.3MB/sec (DVD-ROM) data transfer rates. It is a 12.7mm Slimline form factor multi-session capable, DVD-ROM drive which provides state of the art performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4 GB DVD-ROM (double-sided) discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot and install functions are supported with CD-ROM and DVD-RAM media. Characteristics: Media Data Transfer Rate: CD-ROM=3600 KB/sec (max): DVD-ROM=10.3MB/sec (max) Interface: IDE/ATAPI Avg. Random Access Time: CD-ROM=95ms(typical); DVD-ROM=150ms(typical) Buffer Memory: 256KB Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4 GB(double-sided) Multisession capable (Reads CD/R & CD-R/W media) 12.7mm Slimline form factor Operates in either vertical or horizontal positions Interface supports standard and extended XA formats Loading tray supports 12cm and 8cm disks Limitations: DVD video is not supported. DVD-ROM only reads CD-type formatted media with AIX 5.1. Attributes provided: 8X/24X(max) IDE DVD-ROM Drive Attributes required: 1 Slimline media bay For 9124-720: (#1994) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 differential adapter Attributes required: 1 external SCSI-2 Fast/Wide Port For 9124-720: (#2114) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M 0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI connector to a 68-pin P style connector. Cable has male Mini-68 pin VHDCI connector on one end and a female 68 pin P style connector on the other. Length = 0.3 meters. Attributes provided: Attachment of supported external sub-system to integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector. Attributes required: None For 9124-720: (#2118) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2425) 2.5M 16-bit SCSI-2 System to System Cable This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an OpenPower system. Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at each end Attributes required: 68-pin SCSI Interface For 9124-720: (#2425) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2456) LC-SC 50 Micron Fiber Converter Cable 50 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters. Attributes provided: Attachment to external 50 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector. Attributes required: None For 9124-720: (#2456) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2459) LC-SC 62.5 Micron Fiber Converter Cable 62.5 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters. Attributes provided: Attachment to external 62.5 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector. Attributes required: None For 9124-720: (#2459) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2591) External USB 1.44 MB Diskette Drive The externally attached USB diskette drive provides storage capacity up to 1.44 MB on a high density (2HD) floppy disk and 720 KB on a double density floppy disk. Includes 350mm (13.7 in) captured cable with standard USB connector. Limitation: Maximum 1 USB diskette per adapter, Up to 1 Keyboard and Mouse also supported on the adapter with the diskette drive at the same time No system boot capability Not to be operated upside down or with eject button down Characteristics: Capacity - 1.44 MB (2HD disk) or 720 KB (double density disk) Physical Dimensions: Width=103mm (4.05 in), Height=17.6mm (.69 in), Depth=141.8mm (5.58 in) Color: Black Data Rate: 12 Mbits/sec Max Power Consumption: 2.36 Watt (seek) Operates in all positions except those noted in the limitations above Attributes provided: External diskette drive Attributes required: 1 available USB port For 9124-720: (#2591) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2640) IDE Slimline DVD-ROM Drive (No Longer Available as of March 31, 2005) The 8X/24X(max) Slimline IDE DVD-ROM Drive is an internal tray loading DVD-ROM drive providing up to 3600KB/sec (CD-ROM) and 10.3MB/sec (DVD-ROM) data transfer rates. It is a 12.7mm Slimline form factor multi-session capable, DVD-ROM drive which provides state of the art performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4 GB DVD-ROM (double-sided) discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot and install functions are supported with CD-ROM and DVD-RAM media. Characteristics: Media Data Transfer Rate: CD-ROM=3600 KB/sec (max): DVD-ROM=10.3MB/sec (max) Interface: IDE/ATAPI Avg. Random Access Time: CD-ROM=95ms(typical); DVD-ROM=150ms (typical) Buffer Memory: 256KB Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4 GB(double-sided) Multisession capable (Reads CD/R & CD-R/W media) 12.7mm Slimline form factor Operates in either vertical or horizontal positions Interface supports standard and extended XA formats Loading tray supports 12cm and 8cm disks Limitations: DVD video is not supported. Attributes provided: 8X/24X (max) IDE DVD-ROM Drive Attributes required: 1 Slimline media bay For 9124-720: (#2640) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2738) 2 Port USB PCI Adapter The 2 Port USB PCI Adapter is a USB 2.0 capable adapter that provides for the connection of one USB keyboard and mouse. Attributes provided: USB Keyboard/Mouse Attachment Attributes required: One available PCI slot For 9124-720: (#2738) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2849) POWER GXT135P Graphics Accelerator with Digital Support (No Longer Available as of March 31, 2005) The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for OpenPower servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors. Hardware Description 128-bit graphics processor 8-bit CLUT or 24-bit true color 16 MB SDRAM 32-bit PCI interface Universal PCI (5.0v or 3.3v) 1 hardware color map Features Supported Up to approximately 16.7 million colors Rectangular clipping 2 analog monitor outputs at up to 1280 x 1024 resolution 1 analog monitor output at up to 2048 x 1536 resolution 1 digital monitor output at up to 1600 x 1200 resolution 60 to 85 Hz refresh rates (ISO 9241, Part 3) APIs Supported X-Windows and Motif UMS 2.3.0 (no hardware scaling) Software Requirements: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3, or later Attributes provided: 2D Graphics Attributes required: 1 PCI slot For 9124-720: (#2849) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2934) Asynchronous Terminal/Printer Cable EIA-232 The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal interposer) and replaces this method of printer/terminal attachment. This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is is used in conjunction with : FC 2931 (8-port Async Adapter EIA232, ISA bus) FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136) Attributes provided: EIA232 device attachment capability Attributes required: Any RS/6000 Asynchronous port For 9124-720: (#2934) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2936) Asynchronous Cable EIA-232/V.24 Used to attach a modem to the standard I/O ports with the 10-pin to 25-pin converter cable (#3925), 8-port Cable Assembly, 16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to DB-25 Converter Cable feature #6402) or the 16-Port EIA-232 Remote Async Node (with RJ45 to DB25 Converter Cable feature #8133). The cable is 3 meters (9.8 feet) in length. Attributes provided: Modem attachment to async or serial port Attributes required: Async or serial port For 9124-720: (#2936) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3146) RIO-2 (Remote I/O-2) Cable, 1.2M This 1.2-meter RIO-2 (Remote I/O-2) cable connects two RIO-2 based I/O planars within an I/O drawer. Attributes provided: 1.2M RIO-2 Cable Attributes required: I/O Drawer and two RIO-2 I/O planars For 9124-720: (#3146) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3147) RIO-2 (Remote I/O-2) Cable, 3.5M This 3 1/2 meter RIO-2 (Remote I/O-2)cable is available to connect the processor complex and the I/O drawers. It can also be utilized to connect I/O drawers mounted in separate racks. Attributes provided: Interconnection of CEC and I/O drawers Attributes required: None For 9124-720: (#3147) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3148) RIO-2 (Remote I/O-2) Cable, 10M This 10 meter RIO-2 (Remote I/O-2) cable is available to connect the processor complex and the I/O drawers. It can also be utilized to connect I/O drawers mounted in separate racks. Attributes provided: Interconnection of CEC and I/O drawers Attributes required: None For 9124-720: (#3148) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3273) 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (No Longer Available as of April 15, 2005) The 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 67 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 36.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#3273) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3274) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (No Longer Available as of March 31, 2005) The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 67 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 73.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#3274) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3275) 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly (No Longer Available as of March 31, 2005) The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 67 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 146.8 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#3275) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3277) 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly (No Longer Available as of March 31, 2005) The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2 ms Rotational Speed: 15,000 RPM Maximum Data Transfer Rate: 83 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 36.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#3277) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3278) 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly (No Longer Available as of March 31, 2005) The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI U320 Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2 ms Rotational Speed: 15,000 RPM Maximum Data Transfer Rate: 83 MBps Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps. Attributes provided: 73.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 9124-720: (#3278) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3636) L200P Flat Panel Monitor The L200p flat-panel monitor has the following general characteristics: Business black color 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm (20.1 inches) measured diagonally, incorporating a 0.255 mm pixel pitch/type for bright, high-definition images. Designed to provide flicker free operation at a maximum resolution of 1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in digital mode. Tilt/swivel stand Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 9124-720: (#3636) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3637) IBM T541H /L150p 15" TFT Color Monitor Both the T541H and L150p monitors have the following general characteristics: Business Black color 15-inch TFT LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297 mm pixel pitch/type for bright, high-definition images. Designed to provide flicker free operation at a maximum resolution of 1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in digital mode. Tilt/swivel stand Supports 2D Graphics Adapters only Attributes provided: Color Flat-panel Monitor Attributes required: 2D Graphics Adapter For 9124-720: (#3637) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3638) IBM C220p 21-inch Color Monitor, Business Black, and Cable (No Longer Available as of June 24, 2005) The IBM C220p monitor has the following general characteristics: Business black color 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508 mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel pitch for bright, high-definition images. Designed to provide reduced flicker operation at an optimum and maximum supported addressability of 1600 x 1200 pels at up to 85 Hz (Vesa) non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa). Tilt/swivel stand Dual input allows attachment to two systems concurrently. Depth: 483.6 mm (19.0 in.) Height: 516.4 mm (20.3 in.) Width: 512.8 mm (20.2 in.) Weight: 30.5 kg (67.2 lbs.) Attributes provided: Color Monitor Attributes required: Graphics Adapter For 9124-720: (#3638) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3639) IBM ThinkVision L170p Flat Panel Monitor (No Longer Available as of September 30, 2005) The IBM ThinkVision L170p LCD flat-panel monitor has the following general characteristics: Business black color 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 400.0 mm (15.7 in.) Weight: 5.7 kg (12.6 lbs.) Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees Contrast ratio: 500:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 9124-720: (#3639) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3640) - IBM ThinkVision L171p Flat Panel Monitor The IBM ThinkVision L171p LCD flat-panel monitor has the following general characteristics: Business black color 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.280mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 400.0 mm (15.7 in.) Weight: 5.7 kg (12.6 lbs.) Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees Contrast ratio: 500:1 (minimal) 700:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 9124-720: (#3640) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3642) - ThinkVision L191P Flat Panel Monitor The ThinkVision L191p LCD flat-panel monitor has the following general characteristics: Business black color 19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 408.0 mm (16.1 in.) Weight: 7.1 kg (15.7 lbs.) Contrast ratio: 1000:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 9124-720: (#3642) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3752) Service Package This kit contains publications, wrap plugs, and diagnostic CD-ROM. The "Diagnostics Information for Multiple Bus Systems" contains information common to all multiple bus system units and is used primarily for problem isolation by a customer's service specialist trained on the unit being serviced. These publications are intended to be used in the customer's enterprise by the customer's own service specialists, and not by IBM Service personnel. Two wrap plugs are included for use in diagnostic testing of the following connections to the system unit: RS-232 serial I/O port parallel I/O port This kit also contains system diagnostic CD-ROM, along with a test diskette, for use by the customer's service specialist (not by IBM Service personnel). Attributes provided: None Attributes required: None For 9124-720: (#3752) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3925) Serial Port Converter Cable, 9-Pin to 25-Pin This cable converts the 9-pin serial port on the system to a 25-pin serial port which allows the user to attach 25-pin serial devices to the system. Attributes provided: None Attributes required: None For 9124-720: (#3925) Minimum required: 0 Maximum allowed: 3 (Initial order maximum: 3) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3926) Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M This 4-meter cable and transposer (2 parts) allows external async devices such as printers or terminals to be attached directly to the 9-pin serial port. This is equivalent to using #3925 in combination with #2934. Attributes provided: None Attributes required: None For 9124-720: (#3926) Minimum required: 0 Maximum allowed: 3 (Initial order maximum: 3) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell) This cable is required to connect displays with a 15-pin "D" shell connector to the appropriate accelerator connector when it is farther away than the attached monitor cable can reach. Rack mounted systems are likely candidates for this extender cable. Attributes provided: 6-foot extension cable Attributes required: Supported monitor and adapter with a 15-pin "D" shell connector. For 9124-720: (#4242) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4256) Extender Cable - USB Keyboards, 2M This feature provides a 2M extension cable for use with USB keyboards. Attributes provided: 2M Extension Cable Attributes required: USB Keyboard For 9124-720: (#4256) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4263) SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media Device; Mounting Tray This feature number provides a SCSI LVD logic and power cable that connects the SCSI controller on the system planar to the SCSI media bay. Required when installing a SCSI LVD device in the SCSI media bay. Also includes a mounting tray for the SCSI LVD media device. Attributes provided: Connection between SCSI controller and the SCSI media bay. Mounting tray. Attributes required: SCSI LVD device in SCSI media bay. For 9124-720: (#4263) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4267) SCSI Cable, PCI Adapter to Hot-Swap Disks SCSI cable that connects a PCI adapter to the hot swap disks. Attributes provided: Connection between adapter and hot swap disk drives. Attributes required: None For 9124-720: (#4267) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4273) External SCSI Port Enablement Cable SCSI cable that connects one SCSI internal controller to an external port allowing attachment of external SCSI devices to the system. Installing this feature in the system will negate the usage of a second four-pack disk enclosure (second #6592 or first #6593), and uses 1 slot. Attributes provided: External SCSI port Attributes required: One internal SCSI controller and 1 PCI slot For 9124-720: (#4273) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4691) Rack Status Beacon Cable, Junction Box To Drawer Or Status Beacon (No Longer Available as of November 18, 2005) This cable can be used to connect the Rack Status Beacon Junction Box to a supported rack drawer or to the Rack Status Beacon. Attributes provided: Connection between Rack Status Beacon components Attributes required: None For 9124-720: (#4691) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4692) Rack Status Beacon Cable, Junction Box Daisy Chain (No Longer Available as of November 18, 2005) This cable is used to connect two Rack Status Beacon Junction Boxes (#4693) together. Multiple Junction Boxes may be linked in series, as required. Attributes provided: Connection between (#4693) Junction Boxes Attributes required: Two or more (#4693) Junction Boxes For 9124-720: (#4692) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4693) Rack Status Beacon Junction Box (No Longer Available as of November 18, 2005) This feature provides six input connectors and one output connector for racks configured with the Rack Status Beacon (#4690). Multiple Junction Boxes can be linked together in series with Daisy Chain Cable #4692. Attributes provided: Connection of multiple drawers to a single Rack Status Beacon (#4690). Attributes required: Feature #4690 and two or more #4691 cables. For 9124-720: (#4693) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4962) 10/100 Mbps Ethernet PCI Adapter II The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports: Half / Full Duplex 10/100 Mbps Ethernet interface 10/100 Mbps data rates Auto-negotiation for 10/100 speed and half/full duplex Network boot capability and Network Install Manager (NIM) IEEE 802.3 Ethernet Specification IEEE 802.3u Fast Ethernet Specification The 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Attributes provided: One 10/100 Mbps Ethernet port (connector) Attributes required: One PCI slot For 9124-720: (#4962) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5001) Customer Service Specify This feature code specifies that the system will receive special request services from the Customer Solution Center (CCS). Attributes provided: Customization Attributes required: None For 9124-720: (#5001) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#5005) Software Preinstall Licensed programs may be preinstalled on the media selected. To order this option, specify code (#5005) on the initial system order. The preinstalled licensed programs will be at the same release level as programs being shipped from the Program Libraries at the time the system is manufactured. Attributes provided: None Attributes required: None For 9124-720: (#5005) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#5262) 2-Way 1.65 GHz POWER5 Processor Card,, 8 Memory DIMM Slots 2-way 1.65 GHz processor card. The two processors share 36MB of L3 cache and 1.9MB of L2 cache. There are 8 DIMM slots on the processor card. Attributes provided: 2-way processor card Attributes required: One processor card slot For 9124-720: (#5262) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5700) IBM Gigabit Ethernet-SX PCI-X Adapter (No Longer Available as of March 31, 2005) The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connection with throughput on a standard shortwave multimode optical cable which conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. Linux Network Install Manager (NIM) boot capability is supported with this adapter. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot. Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required. Limitation: Half Duplex (HDX) mode is not supported. Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 9124-720: (#5700) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. Linux Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. Note: For optimum performance, adapter should be placed in a 64 bit PCI-X card slot. Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode. Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 9124-720: (#5701) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses. To increase the data writing performance, a 40 MByte non-volitile fast-write cache is provided as a resident part of this adapter. The 40 MByte fast-write cache can provide a significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting IBM eServer systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or external ports) are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI RAID Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate configured as either a non-array or an array of disks Also the two external ports provide non-array connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. Limitations: The two external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only non-array configuration support. The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Attributes provided: Attachment of internal and external SCSI devices Attributes required: One PCI or PCI-X bus slot For 9124-720: (#5703) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. Linux Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the operating system IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the OpenPower PCI Adapter Placement Reference SA38-XXXX. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode. Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 9124-720: (#5706) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. Linux Network Install Manager (NIM) boot capability is supported with this adapter. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the operating system IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the OpenPower PCI Adapter Placement Reference SA38-XXXX. If card slots are not the limiting factor and maximum throughput is required, the single port IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required. Limitation: Half Duplex (HDX) mode is not supported. Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 9124-720: (#5707) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5709) Dual Channel SCSI RAID Enablement Card The Dual Channel SCSI RAID Enablement Card (#5709) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select IBM eServer systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives. To increase the data writing performance, a 16 MByte non-volitile fast-write cache is provided as a resident part of this feature. The 16 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the Linux supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Limitations: Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Attributes provided: Internal disk drives to be configured as an array. Attributes required: Systems with supporting integrated SCSI adapter. For 9124-720: (#5709) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5712) PCI-X Dual Channel Ultra320 SCSI Adapter The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.), up to twice the maximum data transfer rate of the previous Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate. The two external ports also provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also the two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot adapter with Linux software in a supported IBM eServer system. The adapter also supports target mode. Limitations: The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices Attributes required: One available 3.3 volt PCI or PCI-X slot For 9124-720: (#5712) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5716) 2 Gigabit Fibre Channel PCI-X Adapter The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gps or 2 Gps data rates. The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required. Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices. http://www.storage.ibm.com/hardsoft/disk/products.htm Consult with your IBM representative or Business Partner for additional information relative to any third party attachment. Attributes provided: 1 Fibre Channel/FC-AL interface Attributes required: 1 empty PCI or PCI-X slot For 9124-720: (#5716) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5723) 2 Port Asynchronous EIA-232 PCI Adapter Connection for 2 Asynchronous EIA-232 devices. Ports are Programmable to support EIA-232 protocols, at a line speed of 128K bps. Attributes provided: 2 Asynchronous Ports Attributes required: One PCI Slot For 9124-720: (#5723) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5727) - Dual Channel SCSI RAID Enablement Card The Dual Channel SCSI RAID Enablement Card (#5727) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select pSeries systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives. To increase the data writing performance, a 40 MByte nonvolatile fast-write cache is provided as a resident part of this feature. The 40 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re- format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL: http://techsupport.services.ibm.com/server/mdownload/ Limitation: Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Attributes provided: Internal disk drives can be configured as an array. Attributes required: System with supporting integrated SCSI adapter and disk drives. For 9124-720: (#5727) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 0) OS level required: AIX 5.2 or AIX 5.3, or later. SUSE LINUX Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Initial Order/MES/Both/Supported: Support CSU: Yes Return parts MES: No (#5751) IBM 4.7 GB IDE Slimline DVD-RAM Drive The IBM 4.7 GB IDE Slimline DVD-RAM Drive is an internal tray loading, multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs as well as reading a multitude of other optical media discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs. It is a 12.7mm high Slimline form factor, multi-session capable, DVD-RAM drive which provides state of the art performance. System boot and install functions are supported with CD-ROM and DVD-RAM media. Characteristics: Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diameter; 10.8MB/sec read (8X DVD-ROM); 2.7MB/sec write (2X DVD-RAM) and 2.7MB/sec read (2X DVD-RAM) Interface: Parallel IDE Average Random Access Time: 150ms CD-ROM; 180ms DVD-ROM; 229ms DVD-RAM Buffer Memory: 2MB High-speed burst rate of 16/16/33 MB/second for PIO / MDMA / UDMA transfers respectively Loading tray accommodates both 8cm discs and 12cm discs. Operates in either vertical or horizontal position Reads multi-session discs Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs. Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB double sided DVD-RAM media Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio Limitations: DVD video is not supported. Attributes provided: One 4.7GB IDE Slimline DVD-RAM Drive Attributes required: One IDE 12.7mm high media bay For 9124-720: (#5751) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses VXAtape** data cartridges and is compression capable, providing a capacity of up to 160 GB - a significant increase in capacity over the previous internal tape drives. Characteristics Capacity: 80 GB native mode, 160 GB (typical) compression mode Form Factor: 5.25-inch half high Media: uses VXAtape data cartridges Technology: Helical scan, rotating head Operation: Streaming Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression Interface: SCSI-2 (LVD/SE) asynchronous/synchronous Compatibility: 80 GB mode (Read/Write), 160 GB compression (Read/Write) Attributes provided: One 80/160 GB internal tape drive Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address For 9124-720: (#6120) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6134) 60/150 GB 16-bit 8mm Internal Tape Drive The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch half-high, 16-bit tape drive. This drive provides a high capacity tape drive for save/restore and archiving functions. This tape drive uses IBM 8mm data cartridges and is compression capable, providing a capacity of up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm internal tape drive. The 60/150 GB 16-bit 8mm Internal Tape Drive, is limited to a maximum system ambient operating temperature of 31C (87.8F) at a maximum operating altitude of 2134m (7000 ft). Lower altitudes have higher maximum ambient operating temperatures. Refer to the "IBM Site and Hardware Planning Information Guide" (SA38-0508) for additional details. Characteristics: Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode Form Factor: 5.25-inch Half-high Media: IBM 8mm Data Cartridge with Smart Clean Technology Technology: Helical Scan, Rotating Head Operation: Streaming Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical) Compression M Interface: SCSI-2 16-bit Low Voltage Differential(LVD) / Single-ended (SE) Asynchronous/Synchronous Compatibility: See the following Technical Support Web page (8mm Tape Interchange Information section) for compatibility information - http://techsupport.services.ibm.com/server/ mdownload/tapewhdr.html   Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive Attributes required: One 1.6-inch(41mm) half-high media bay and one SCSI-2 internal 16-bit address For 9124-720: (#6134) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6258) 36/72 4mm Internal Tape Drive The 36/72 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 72 GB - a significant increase in capacity over the previous 20/40 4-mm internal tape drives (when using DDS-4 media). Characteristics Capacity: 36 GB native mode, 70 GB (typical) compression mode Form Factor: 5.25-inch half high Media: IBM 4-mm supports the new DAT72 media Technology: Helical scan, rotating head Operation: Streaming Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression Interface: SCSI-2 (single ended) asynchronous/synchronous Compatibility: 4 GB mode (Read/Write), 8 GB compression (Read/Write); 12 GB mode(Read/Write), 24 GB compression (Read/Write), 36 GB mode (Read/Write), 72 GB compression (Read/Write). Note: MES orders are shipped with a black bezel. Attributes provided: 4mm tape capability Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 16-bit address For 9124-720: (#6258) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6458) Power Cable -- Drawer to IBM PDU, 14-foot, 250V/10A Standard IBM rack power cable that goes from the system or I/O drawer to the rack power distribution unit (PDU). Attributes provided: Power cable Attributes required: None For 9124-720: (#6458) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6460) Power Cord (14-foot), Drawer to OEM PDU, (125V, 15A), Plug Type #4 This power cord goes from the system or I/O drawer to the rack power distribution unit. Plug type #4 (NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 14-foot length. The following countries/regions use the #6460 power cord to power the system and/or peripheral features requiring a power cord: United States, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Bonnaire, Calicos Islands, Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Mexico, Micronesia, Montserrat, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, St. Kitts/Nevis, St. Martin, Taiwan, Tortola (BVI), Trinidad/Tobago, Venezuela. Attributes provided: Power cord Attributes required: None For 9124-720: (#6460) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6469) Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), United States, Plug Type #5 This power cord goes from the system or I/O drawer to the rack power distribution unit. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 14-foot length. The following countries/regions use the #6469 power cord to power the system and/or peripheral features requiring a power cord: United States, Anguilla, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Bonnaire, Caicos Is., Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatamala, Haiti, Honduras, Jamaica, Japan, Micronesia, Montserrat, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, St. Marten NA, Taiwan, Tortola (BVI), Thailand, Venezuela. Attributes provided: Power cord Attributes required: None For 9124-720: (#6469) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6470) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #4 (NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. The following countries/regions use the #6470 power cord to power the system and/or peripheral features requiring a power cord: United States, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Bonnaire, Calicos Islands, Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Mexico, Micronesia, Montsderrrrat, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, St. Kitts/Nevis, St. Martin, Taiwan, Tortola (BVI), Trinidad/Tobago, Venezuela. Attributes provided: Power cord Attributes required: None For 9124-720: (#6470) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6471) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #70 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #70 (iNMETRO NBR 6147, NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6471 power cord to power the system and/or peripheral features requiring a power cord: Brazil Attributes provided: Power cord Attributes required: None For 9124-720: (#6471) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6472) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #18 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #18 (CEE 7 VII). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6472 power cord to power the system and/or peripheral features requiring a power cord: Afghanistan, Albania, Algeria, Andorra, Angola, Armenia, Austria, Belarus, Belgium, Benin, Bosnia/Herzegovina, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Conogo, Croatia, Czech Republic, Dahomey, Djibuouti, Egypt, Equatorial Guinea, Eritrea, Estonia, Etrhiopia, Finland, France, French Polynesia, French Guyana, Gabon, Georgia, Germany, Greece, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland, Indonesia, Iran, Ivory Coast, Kazakhstan, Krygystan, Laos, Latvia, Lebanon, Lintuania, Luxembourg, Macau, Macedonia, Mali, Martinigue, Mauritania, Mauritus, Mayotte, Moldova, Monaco, Mongolia, Morocco, Mozambique, Netherlands, New Caledonia, Niger, North Korea (C19 only), Norway, Poland, Portugal, Principe, Reunion, Romania, Russia, Rwanda, St. Thomas, Saudi Arabia, Senegal, Serbia, Slovenia, Somalia, South Korea (C19 only), Spain, Surinam, Sweden, Syria, Tahiti, Tajikistan, Togo, Tunesia, Turkey, Turkmenistan, Ukraine, Upper Volta, Uzbekistan, Vanuatu, Vietnam, Wallis & Futuna, Zaire, Zimbabwe. Attributes provided: Power cord Attributes required: None For 9124-720: (#6472) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6473) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type 19 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #19 (CEE). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6473 power cord to power the system and/or peripheral features requiring a power cord: Denmark Attributes provided: Power cord Attributes required: None For 9124-720: (#6473) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6474) Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug Type #23 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #23 (BS 1364A). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6474 power cord to power the system and/or peripheral features requiring a power cord: Abu Dhabi, Bahrain, Botswana, Brunei, Channel Islands, Cyprus, Dominica, Gambia, Grenada, Grenadines, Guyana, Hong Kong, Iraq, Ireland, Jordan, Kenya, Kuwait, Liberia, Malawi, Malaysia, Malta, Myanmar, Nkigeria, Oman, Qatar, Sierra Leone, Singapore, St. Kitts, St. Lucia, Seychelles, Sudan, Tanzania, Trinidad & Tobago, United Arab Emirates, United Kingdom, Yemen, Zambia Attributes provided: Power cord Attributes required: None For 9124-720: (#6474) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6475) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #32 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #32 (SII 32-1971). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6475 power cord to power the system and/or peripheral features requiring a power cord: Israel Attributes provided: Power cord Attributes required: None For 9124-720: (#6475) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6476) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #24 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #24 (SEV 24507). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6476 power cord to power the system and/or peripheral features requiring a power cord: Lichtenstein, Switzerland. Attributes provided: Power cord Attributes required: None For 9124-720: (#6476) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6477) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #22 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #22 (SABS 164). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6477 power cord to power the system and/or peripheral features requiring a power cord: Bangladesh, LeSotho, Maceo,Maldives, Nambia, Pakistan, Samoa, South Africa, Sri Lanka, Swaziland, Uganda. Attributes provided: Power cord Attributes required: None For 9124-720: (#6477) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6478) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #25 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #25 (CEI 23-16). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6478 power cord to power the system and/or peripheral features requiring a power cord: Chile, Italy, Libya. Attributes provided: Power cord Attributes required: None For 9124-720: (#6478) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6479) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6 (No Longer Available as of March 31, 2005) This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6479 power cord to power the system and/or peripheral features requiring a power cord: Australia, Fiji Islands, Kiribati, Nauru, New Zealand, Papua New Guinea, W. Samoa Attributes provided: Power cord Attributes required: None For 9124-720: (#6479) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6487) Power Cord (6-foot), To Wall, (250V, 15A), United States, Plug Type #5 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. The following countries/regions use the #6487 power cord to power the system and/or peripheral features requiring a power cord: United States, Anguilla, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Bonnaire, Caicos Is., Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatamala, Haiti, Honduras, Jamaica, Japan, Micronesia, Montserrat, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, St. Marten NA, Taiwan, Tortola (BVI), Thailand, Venezuela. Attributes provided: Power cord Attributes required: None For 9124-720: (#6487) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6488) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A or 250V, 10A ), Plug Type #2 This power cord goes from the system and/or peripheral features to a wall-type outlet. Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6488 power cord to power the system and/or peripheral features requiring a power cord: Argentina, Paraguay, Uruguay Attributes provided: Power cord Attributes required: None For 9124-720: (#6488) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6493) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #62 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #62 (GB 1053). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6493 power cord to power the system and/or peripheral features requiring a power cord: People's Republic of China Attributes provided: Power cord Attributes required: None For 9124-720: (#6493) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6494) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #69 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #69 (IS 6538). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6494 power cord to power the system and/or peripheral features requiring a power cord: India Attributes provided: Power cord Attributes required: None For 9124-720: (#6494) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6495) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #64 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #64. Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6495 power cord to power the system and/or peripheral features requiring a power cord: Brazil Attributes provided: Power cord Attributes required: None For 9124-720: (#6495) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6496) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #66 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #66 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6496 power cord to power the system and/or peripheral features requiring a power cord: North Korea, South Korea Attributes provided: Power cord Attributes required: None For 9124-720: (#6496) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6497) Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #10 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #10 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6497 power cord to power the system and/or peripheral features requiring a power cord: United States Canada Colombia Japan Mexico Attributes provided: Power cord Attributes required: None For 9124-720: (#6497) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6592) Ultra320 SCSI 4-Pack This feature provides an enclosure that can contain up to 4 Ultra320 SCSI disk drives. Attributes provided: Enclosure for up to 4 disk drives Attributes required: Empty enclosure location. For 9124-720: (#6592) Minimum required: 1 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6593) Ultra320 SCSI 4-Pack for Disk Mirroring This feature provides an enclosure that can contain up to 4 Ultra320 SCSI disk drives. Used for disk mirroring and requires Feature Number 5712, the PCI-X Dual Channel Ultra320 SCSI Adapter or Feature Number 5703, the PCI-X Dual Channel Ultra320 SCSI RAID Adapter or a follow-on, and Feature Number 4267, the PCI-X adapter to hot-swap disk enclosure cable. Attributes provided: Enclosure for up to 4 disk drives Attributes required: Empty enclosure location. For 9124-720: (#6593) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6598) - Disk Slot Fillers (Quantity 4) This feature allows the customer to move disks from the system to another system or an IO drawer and to place a blank disk filler in the empty disk slot. Systems shipped from manufacturing have blank filler in the empty disk slots. Attributes provided: 4 disk slot fillers Attributes required: None For 9124-720: (#6598) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6651) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #75 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6651 power cord to power the system and/or peripheral features requiring a power cord: Taiwan Attributes provided: Power cord Attributes required: None For 9124-720: (#6651) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6659) Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #76 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6659 power cord to power the system and/or peripheral features requiring a power cord: Taiwan Attributes provided: Power cord Attributes required: None For 9124-720: (#6659) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6660) Power Cord (14-foot), Drawer To OEM PDU (125V, 15A), Plug Type #59 (Denan marking) This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #59 (NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 14-foot length. This power cord meets the Denan marking requirement in Japan. Attributes provided: Power Cord Attributes required: None For 9124-720: (#6660) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6669) Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), Plug Type #5 (Denan marking) This power cord goes from the system or I/O drawer to the rack power distribution unit. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 14-foot length. This power cord meets the Denan marking requirement in Japan. Attributes provided: Power Cord Attributes required: None For 9124-720: (#6669) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6670) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (Denan marking) This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #59 (NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. This power cord meets the Denan marking requirement in Japan. Attributes provided: Power cord Attributes required: None For 9124-720: (#6670) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6671) - Power Cord (9-foot), Drawer to IBM PDU, 250V/10A Standard IBM rack power cable that goes from the system or I/O drawer to the rack power distribution unit (PDU). 9-foot length. Attributes provided: Power cable Attributes required: None For 9124-720: (#6671) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6672) - Power Cord (5-foot), Drawer to IBM PDU, 250V/10A Standard IBM rack power cable that goes from the system or I/O drawer to the rack power distribution unit (PDU). 5-foot length. Attributes provided: Power cable Attributes required: None For 9124-720: (#6672) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6680) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated This insulated power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6479 power cord to power the system and/or peripheral features requiring a power cord: Australia, Fiji Islands, Kiribati, Nauru, New Zealand, Papua New Guinea, W. Samoa. Attributes provided: Power cord Attributes required: None For 9124-720: (#6680) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6687) Power Cord (6-foot),To Wall, (250V, 15A), Plug Type #5 (Denan marki ng) This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. This power cord meets the Denan marking requirement in Japan. Attributes provided: Power cord Attributes required: None For 9124-720: (#6687) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#7162) IBM Rack-mount Drawer Rail Kit This system will be shipped with IBM mounting rails for installation in an IBM rack. Attributes provided: None Attributes required: #7914 or #7915 For 9124-720: (#7162) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Feature #7162 or #7163 must be ordered if feature #7886 or #7874 is ordered. (#7163) OEM Rack-mount Drawer Rail Kit (No Longer Available as of May 12, 2005) This system will be shipped with OEM mounting rails for installation in an OEM rack. Attributes provided: None Attributes required: #7886 or #7874 For 9124-720: (#7163) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Feature #7162 or #7163 must be ordered if feature #7886 or #7874 is ordered. (#7305) AAP Software Pre-Install Indicator Software pre-install indicator for Authorized Assemblers Attributes provided: Software Preinstall Attributes required: Authorized Assembler Order For 9124-720: (#7305) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#7801) Ethernet Cable, 6M, Hardware Management Console to System Unit This feature provides a six meter long Ethernet cable for attachment of a Hardware Management Console to the system unit. Attributes provided: 6M Ethernet Cable Attributes required: Ethernet port on Hardware Management Console For 9124-720: (#7801) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#7802) Ethernet Cable, 15M, Hardware Management Console to System Unit This feature provides a fifteen meter long Ethernet cable for attachment of a Hardware Management Console to the system unit. Attributes provided: 15M Ethernet Cable Attributes required: Ethernet port on Hardware Management Console For 9124-720: (#7802) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#7876) Processor Power Regulator This feature is required on the p6 Model 550 when a processor is installed in a processor slot. At least one is required since a Model 550 requires one processor card in the minimum configuration. The regulator provides the needed power/voltage to allow the processors to operate. Attributes provided: Power regulator Attributes required: None For 9124-720: (#7876) Minimum required: 1 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#7877) Media Backplane This feature is required to support the system control panel and any IDE media device installed in the system. Attributes provided: IDE Media Backplane Card Attributes required: None For 9124-720: (#7877) Minimum required: 1 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#7889) Power Supply, 1475 Watt AC, Hot-swap, Base and Redundant This feature provides an 1475 Watt AC power supply, either as the primary power supply in the system, or the secondary power supply for redundant power. Each power supply, base and redundant, comes with one power cord Attributes provided: 1475 Watt AC Power Supply Attributes required: Available Power Supply Bay For 9124-720: (#7889) Minimum required: 1 Maximum allowed: 2 (Initial order maximum: 2) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#7912) IBM Deskside Cover Set Indicates that this order is for a deskside system requiring IBM cover set. Attributes provided: None Attributes required: None For 9124-720: (#7912) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Either #7912 or #7914 must be on initial order. (#7914) IBM Rack-mount Drawer Bezel and Hardware Indicates that this order is for a rack-mount system requiring IBM bezel and hardware. Attributes provided: None Attributes required: None For 9124-720: (#7914) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Either #7912 or #7914 must be on initial order. (#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P This feature provides a USB attached US English #103P keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8800) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8801) Quiet Touch Keyboard - USB, Business Black, French, #189 This feature provides a USB attached French #189 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8801) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142 This feature provides a USB attached Italian #142 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8802) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8803) Quiet Touch Keyboard - USB, Business Black, German Austrian, #129 This feature provides a USB attached German/Austrian #129 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8803) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166 This feature provides a USB attached UK English #166 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8804) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172 This feature provides a USB attached Spanish #172 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8805) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194 This feature provides a USB attached Japanese #194 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8806) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275 This feature provides a USB attached Brazilian Portuguese #275 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8807) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8808) Quiet Touch Keyboard - USB, Business Black, Canadian French, #058 This feature provides a USB attached Canadian French #058 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8808) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8810) Quiet Touch Keyboard - USB, Business Black, Belgian Dutch, #120 This feature provides a USB attached Belgian/Dutch #120 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8810) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8811) Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153 This feature provides a USB attached Swedish/Finnish #153 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8811) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8812) Quiet Touch Keyboard - USB, Business Black, Danish, #159 This feature provides a USB attached Danish #159 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8812) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8813) Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442 This feature provides a USB attached Bulgarian #442 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8813) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8814) Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G This feature provides a USB attached Swiss/French/German #150F/G keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8814) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8816) Quiet Touch Keyboard - USB, Business Black, Norwegian, #155 This feature provides a USB attached Norwegian #155 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8816) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8818) Quiet Touch Keyboard - USB, Business Black, Portuguese, #163 This feature provides a USB attached Portuguese #163 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8818) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8819) Quiet Touch Keyboard - USB, Business Black, Greek, #319 This feature provides a USB attached Greek #319 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8819) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8820) Quiet Touch Keyboard - USB, Business Black, Hebrew, #212 This feature provides a USB attached Hebrew #212 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8820) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8821) Quiet Touch Keyboard - USB, Business Black, Hungarian, #208 This feature provides a USB attached Hungarian #208 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8821) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8823) Quiet Touch Keyboard - USB, Business Black, Polish, #214 This feature provides a USB attached Polish #214 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8823) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245 This feature provides a USB attached Slovakian #245 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8825) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243 This feature provides a USB attached Czech #243 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8826) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8827) Quiet Touch Keyboard - USB, Business Black, Turkish, #179 This feature provides a USB attached Turkish #179 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8827) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171 This feature provides a USB attached LA Spanish #171 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8829) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8830) Quiet Touch Keyboard - USB, Business Black, Arabic, #238 This feature provides a USB attached Arabic #238 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8830) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8833) Quiet Touch Keyboard - USB, Business Black, Korean, #413 This feature provides a USB attached Korean #413 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8833) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8834) Quiet Touch Keyboard - USB, Business Black, Chinese #467 This feature provides a USB attached Chinese/US #467 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8834) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445 This feature provides a USB attached French Canadian #445 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8835) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8836) Quiet Touch Keyboard - USB, Business Black, Thai, #191 This feature provides a USB attached Thai #191 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8836) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443 This feature provides a USB attached Russian #443 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8838) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8839) Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105 This feature provides a USB attached Yugoslavian/Latin #105 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8839) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P This feature provides a USB attached US English #103P (EMEA) keyboard. Attributes provided: Keyboard Attributes required: USB Port For 9124-720: (#8840) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8841) Mouse - Business Black with Keyboard Attachment Cable This feature provides a three button mouse and a cable for attachment to a keyboard. Attributes provided: 3-Button Mouse Attributes required: Keyboard with Mouse Attachment Port For 9124-720: (#8841) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE LINUX Enterprise Server 9 for POWER, or later, or Red Hat Enterprise Linux AS for POWER Version 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#9004) Southern Hemisphere Designator for Monitors Specifies that southern hemisphere models are required for all CRT monitors on the initial plant order or on MES orders. Not required with TFT monitors. Attributes provided: None Attributes required: Monitor For 9124-720: (#9004) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#9169) - Factory Integration Specify Selection of this indicator will direct the order to a fulfillment center that will perform rack-integration of the system. Attributes provided: None Attributes required: None For 9124-720: (#9169) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9300) Language Group Specify - US English English language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 9124-720: (#9300) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9351) - Express Product Offering 91241D1 This feature is used to order Express Product Offering 91241D1 on the IBM eServer OpenPower 720. An Express Product Offering is only available on initial order. The offering consists of the following requirements: 1 x 2-way 1.5 GHz processor card (#1943) 2 x 2048 MB (2x1024MB) DIMMs (#1950) 2 x 73.4 GB 10,000 RPM Disk Drive (#1968) 1 x IBM Deskside Cover Set (#7912) 1 x Processor Power Regulator (#7876) 1 x Power Supply, 1475 Watt (#7889) 1 x Ultra320 SCSI 4-Pack (#6592) 1 x Media Backplane (#7877) 1 x DVD-ROM (#1994) 1 x Language group specify (#9300 or 97xx) 1 x Power Cord   Attributes provided: Express Product Offering 91241D1 Attributes required: None For 9124-720: (#9351) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9352) - Express Product Offering 91241D2 This feature is used to order Express Product Offering 91241D2 on the IBM eServer OpenPower 720. An Express Product Offering is only available on initial order. The offering consists of the following requirements: 1 x 2-way 1.5 GHz processor card (#1943) 2 x 2048 MB (2x1024MB) DIMMs (#1950) 2 x 73.4 GB 10,000 RPM Disk Drive (#1968) 1 x IBM Rack-mount Drawer Bezel and Hardware (#7914) 1 x Rack-mount Drawer Rail Kit (#7162) 1 x Processor Power Regulator (#7876) 1 x Power Supply, 1475 Watt (#7889) 1 x Ultra320 SCSI 4-Pack (#6592) 1 x Media Backplane (#7877) 1 x DVD-ROM (#1994) 1 x Language group specify (#9300 or 97xx) 1 x Power Cord   Attributes provided: Express Product Offering 91241D2 Attributes required: None For 9124-720: (#9352) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9353) - Express Product Offering 91241D3 This feature is used to order Express Product Offering 91241D3 on the IBM eServer OpenPower 720. An Express Product Offering is only available on initial order. The offering consists of the following requirements: 1 x 2-way 1.65 GHz processor card (#1944) 2 x 2048 MB (2x1024MB) DIMMs (#1950) 2 x 73.4 GB 10,000 RPM Disk Drive (#1968) 1 x IBM Rack-mount Drawer Bezel and Hardware (#7914) 1 x Rack-mount Drawer Rail Kit (#7162) 1 x Processor Power Regulator (#7876) 1 x Power Supply, 1475 Watt (#7889) 1 x Ultra320 SCSI 4-Pack (#6592) 1 x Media Backplane (#7877) 1 x DVD-ROM (#1994) 1 x Language group specify (#9300 or 97xx) 1 x Power Cord   Attributes provided: Express Product Offering 91241D3 Attributes required: None For 9124-720: (#9353) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9354) - Express Product Offering 91241D4 This feature is used to order Express Product Offering 91241D4 on the IBM eServer OpenPower 720. An Express Product Offering is only available on initial order. The offering consists of the following requirements: 2 x 2-way 1.5 GHz processor card (#1943) 4 x 2048 MB (2x1024MB) DIMMs (#1950) 4 x 73.4 GB 10,000 RPM Disk Drive (#1968) 1 x Dual Channel SCSI RAID Enablement Card (#1976) 1 x IBM Rack-mount Drawer Bezel and Hardware (#7914) 1 x Rack-mount Drawer Rail Kit (#7162) 2 x Processor Power Regulator (#7876) 2 x Power Supply, 1475 Watt (#7889) 1 x Ultra320 SCSI 4-Pack (#6592) 1 x Media Backplane (#7877) 1 x DVD-ROM (#1994) 1 x Language group specify (#9300 or 97xx) 2 x Power Cord   Attributes provided: Express Product Offering 91241D4 Attributes required: None For 9124-720: (#9354) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9355) - Express Product Offering 91241D5 This feature is used to order Express Product Offering 91241D5 on the IBM eServer OpenPower 720. An Express Product Offering is only available on initial order. The offering consists of the following requirements: 2 x 2-way 1.65 GHz processor card (#1944) 2 x 4096 MB (2x2048MB) DIMMs (#1951) 4 x 73.4 GB 15,000 RPM Disk Drive (#1971) 1 x POWER Hypervisor (#1965) 1 x Dual Channel SCSI RAID Enablement Card (#1976) 1 x IBM Rack-mount Drawer Bezel and Hardware (#7914) 1 x Rack-mount Drawer Rail Kit (#7162) 2 x Processor Power Regulator (#7876) 2 x Power Supply, 1475 Watt (#7889) 1 x Ultra320 SCSI 4-Pack (#6592) 1 x Media Backplane (#7877) 1 x DVD-ROM (#1994) 1 x Language group specify (#9300 or 97xx) 2 x Power Cord   Attributes provided: Express Product Offering 91241D5 Attributes required: None For 9124-720: (#9355) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: SUSE Linux Server for POWER systems for iSeries and pSeries systems, or Red Hat Enterprise Linux 3 Update 3 - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9700) Language Group Specify - Dutch Dutch language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9700) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9703) Language Group Specify - French French language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9703) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9704) Language Group Specify - German German language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9704) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9705) Language Group Specify - Polish Polish language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 9124-720: (#9705) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9707) Language Group Specify - Portuguese Portuguese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9707) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9708) Language Group Specify - Spanish Spanish language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9708) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9711) Language Group Specify - Italian Italian language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9711) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9712) Language Group Specify - Canadian French Canadian French language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9712) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9714) Language Group Specify - Japanese Japanese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9714) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9715) Language Group Specify - Traditional Chinese (Taiwan) Traditional Chinese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9715) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9716) Language Group Specify - Korean Korean language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9716) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9718) Language Group Specify - Turkish Turkish language group for nomenclature and publications. Attributes provided: None Attributes required: None For 9124-720: (#9718) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9719) Language Group Specify - Hungarian Hungarian language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 9124-720: (#9719) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9720) Language Group Specify - Slovakian Slovakian language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 9124-720: (#9720) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9721) Language Group Specify - Russian Russian language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 9124-720: (#9721) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9722) Language Group Specify - Simplified Chinese (PRC) Simplified Chinese language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 9124-720: (#9722) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9724) Language Group Specify - Czech Czech language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 9124-720: (#9724) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9725) Language Group Specify - Romanian Romanian language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9725) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9727) Language Group Specify - Slovenian Slovenian language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 9124-720: (#9727) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Feature Exchanges Not available. Back to top   Accessories None. Customer Replacement Parts None. Back to top   Machine Elements None. Back to top   Supplies None. Diskettes None. Trademarks (R), (TM), * Trademark or registered trademark of International Business Machines Corporation. ** Company, product, or service name may be a trademark or service mark of others. Windows is a trademark of Microsoft Corporation.  © IBM Corporation 2005. Back to top