- LANGUAGES
- (#9300) - Language Group Specify - US English
- (#9700) - Language Group Specify - Dutch
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9718) - Language Group Specify - Turkish
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- (#9724) - Language Group Specify - Czech
- (#9725) - Language Group Specify -- Romanian
- (#9727) - Language Group Specify -- Slovenian
- SPECIFY CODES
- (#0265) - AIX Partition Specify
- (#0266) - Linux Partition Specify
- (#0191) - RACK CONTENT SPECIFY: Migrated 7041/61D - 4 EIA
- (#0268) - Rack Content Specify: 9118-575
- (#4643) - 7040-61D I/O Drawer Attachment Indicator
- (#4644) - 7045-SW4 Migrated Drawer Indicator
- (#4651) - Rack Indicator, Rack #1
- (#4652) - Rack Indicator, Rack #2
- (#4653) - Rack Indicator, Rack #3
- (#4654) - Rack Indicator, Rack #4
- (#4655) - Rack Indicator, Rack #5
- (#4656) - Rack Indicator, Rack #6
- (#4657) - Rack Indicator, Rack #7
- (#4658) - Rack Indicator, Rack #8
- (#4659) - Rack Indicator, Rack #9
- (#4660) - Rack Indicator, Rack #10
- (#4661) - Rack Indicator, Rack #11
- (#4662) - Rack Indicator, Rack #12
- (#4663) - Rack Indicator, Rack #13
- (#4664) - Rack Indicator, Rack #14
- (#4665) - Rack Indicator, Rack #15
- (#4666) - Rack Indicator, Rack #16
- (#4671) - First Shared I/O Drawer, Indicator
- (#4672) - Second Shared I/O Drawer, Indicator
- (#4673) - Third Shared I/O Drawer, Indicator
- (#4674) - Fourth Shared I/O Drawer, Indicator
- (#8453) - Base Customer Spec Plcmnt
- (#9671) - Manufacturing Process Indicator
- (#9672) - Manufacturing Process Indicator
- MISCELLANEOUS
Special Features - Initial Orders
- CABLES
- (#3800) - Pwr.Cbl.Grp, 09U(or 09U Lft)
- POWER
- (#7803) - Bulk Power Controller Assembly
- MISCELLANEOUS
- (#5005) - Software Preinstall
- PROCESSORS
- (#7657) - 16 Way 1.5GHz POWER5 CPU
- (#7836) - 8-Way 1.9GHz POWER5 Processor, 288 MB L3 Cache and System
Planar
- RACK RELATED
- (#5793) - System Rack
- (#6850) - Weight Reduction Option
- (#7960) - Compact Handling Option
- (#7964) - Shipping Depth Reduction
Special Features - Plant and/or Field Installable
- ADAPTERS
- (#1811) - GX Dual-port 4x IB HCA
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#5723) - 2-Port Asynchronous IEA-232 PCI Adapter
- (#5736) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter
- (#5710) - PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter
- (#5711) - PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
- (#6204) - PCI Universal Differential Ultra SCSI Adapter
- (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
- (#4959) - IBM Token-Ring PCI Adapter
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
- (#5718) - 10 Gigabit Ethernet -SR PCI-X Adapter
- (#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
- (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#4599) - PCI Blind Swap Cassette Kit, Single Wide Adapters,
Universal
- (#2738) - 2-Port USB PCI Adapter
- (#7910) - 2 Link Switch Network Interface (p5-575)
- CABLES
- (#1835) - 3 meter 4x IB Cable
- (#1836) - 8 meter 4x IB Cable
- (#3161) - Switch Cable (SNI), 1.2 meter, copper
- (#3166) - Switch Cable (SNI), 3 meter, copper
- (#3167) - Switch Cbl.(SNI)10M Copper
- (#3925) - Serial Port Converter Cable, 9-pin to 25-pin
- (#7922) - Switch Cable (SNI), 0.5 meter, copper
- (#7853) - Power Cables, 4x, 01U
- (#7854) - Power Cables, 4x, 05U
- (#7856) - Power Cables, 4x, 13U
- (#7857) - Power Cables, 4x, 19U
- (#7858) - Power Cables, 4x, 23U
- (#7859) - Power Cables, 4x, 27U
- (#7860) - Power Cables, 4x, 31U
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- (#2425) - 2.5M 16-bit SCSI-2 System-to-System Cable
- (#2456) - LC-SC 50 Micron Fiber Converter Cable
- (#2459) - LC-SC 62.5 Micron Fiber Converter Cable
- (#4242) - 6-Foot Extender Cable for Displays (15-pin D-shell to
15-pin D-shell)
- (#4256) - Extender Cable - USB Keyboards, 2M
- (#7801) - Ethernet Cable, 6M, Hardware Management Console to System
Unit
- (#7802) - Ethernet Cable, 15M, Hardware Management Console to System
Unit
- (#7920) - Ethernet Cables, Node to Hubs, EIA01 through EIA17
- (#7921) - Ethernet Cables, Node to Hubs, EIA19 through EIA35
- (#2951) - Cable, V.24 / EIA-232
- (#2952) - Cable, V.35
- (#2953) - Cable, V.36 / EIA-499
- (#2954) - Cable, X.21
- (#3125) - Serial-to-Serial Port Cable for Rack/Rack
- (#3146) - RIO-2(Remote I/O-2)Cbl, 1.2M
- (#3168) - RIO-2 (Remote I/O-2) Cbl, 2.5M
- (#3803) - Pwr.Cbl.Grp, 19U(or 19U Lft)
- (#3804) - Pwr.Cbl.Grp, 23U(or 23U Lft)
- (#3805) - Pwr.Cbl.Grp, 27U(or 27U Lft)
- (#3806) - Pwr.Cbl.Grp, 31U(or 31U Lft)
- (#3807) - Pwr.Cbl.Grp, 13U(or 13U Lft)
- (#3810) - Pwr.Cbl.Grp, 11U(or 09U Rt)
- (#3813) - Pwr.Cbl.Grp, 21U(or 19U Rt)
- (#3814) - Pwr.Cbl.Grp, 25U(or 23U Rt)
- (#3815) - Pwr.Cbl.Grp, 29U(or 27U Rt)
- (#3816) - Pwr.Cbl.Grp, 33U(or 31U Rt)
- (#3817) - Pwr.Cbl.Grp, 15U(or 13U Rt)
- (#7843) - Pwr.Cbl.Grp, 03U(or 01U Rt)
- (#7844) - Pwr.Cbl.Grp, 01U(or 01U Lft)
- (#7845) - Pwr.Cbl.Grp, 07U(or 05U Rt)
- (#7846) - Pwr.Cbl.Grp, 05U(or 05U Lft)
- (#7924) - RIO-2(Remote I/O-2)Cbl, 0.6M
- DISKS
- (#3274) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3275) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3277) - 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3278) - 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3279) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- DISPLAYS
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H /L150p 15" TFT Color Monitor
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - IBM ThinkVision L171p Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- KEYBOARDS
- (#8800) - Quiet Touch Keyboard - USB, Business Black, US English,
#103P
- (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189
- (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142
- (#8803) - Quiet Touch Keyboard - USB, Business Black,
German/Austrian, #129
- (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English,
#166
- (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172
- (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194
- (#8807) - Quiet Touch Keyboard - USB, Business Black,
Brazilian/Portuguese, #275
- (#8808) - Quiet Touch Keyboard - USB, Business Black, Canadian
French, #058
- (#8810) - Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch,
#120
- (#8811) - Quiet Touch Keyboard - USB, Business Black,
Swedish/Finnish, #153
- (#8812) - Quiet Touch Keyboard - USB, Business Black, Danish, #159
- (#8813) - Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
- (#8814) - Quiet Touch Keyboard - USB, Business Black,
Swiss/French/German, #150F/G
- (#8816) - Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
- (#8817) - Quiet Touch Keyboard - USB, Business Black, Dutch, #143
- (#8818) - Quiet Touch Keyboard - USB, Business Black, Portuguese,
#163
- (#8819) - Quiet Touch Keyboard - USB, Business Black, Greek, #319
- (#8820) - Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
- (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
- (#8823) - Quiet Touch Keyboard - USB, Business Black, Polish, #214
- (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
- (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243
- (#8827) - Quiet Touch Keyboard - USB, Business Black, Turkish, #179
- (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish,
#171
- (#8830) - Quiet Touch Keyboard - USB, Business Black, Arabic, #238
- (#8833) - Quiet Touch Keyboard - USB, Business Black, Korean, #413
- (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese/US,
#467
- (#8835) - Quiet Touch Keyboard - USB, Business Black, French
Canadian, #445
- (#8836) - Quiet Touch Keyboard - USB, Business Black, Thai, #191
- (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443
- (#8839) - Quiet Touch Keyboard - USB, Business Black,
Yugoslavian/Latin, #105
- (#8840) - Quiet Touch Keyboard - USB, Business Black, US English
(EMEA), #103P
- MEMORY
- (#4444) - 1024MB (4x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM
- (#4452) - 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
- (#4454) - 8192MB (4x2048MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
- (#4490) - 4096MB (4x1024MB) DIMMs, 208-pin, 250MHz Stacked DDR1 SDRAM
- (#4491) - 16384MB (4x4096MB) DIMMs, 208-pin, 250MHz Stacked DDR1
SDRAM
- POWER
- (#6186) - Bulk Power Regulator
- (#6200) - Integrated Battery Backup, Primary or Redundant-Front
Mounted
- (#6201) - Integrated Battery Backup, Redundant Rear Mounted
- (#6267) - Power Distribution Jumper Assembly, High Current
- (#7837) - Bulk Power Distribution Assembly
- (#6240) - Cable, Integrated Battery Backup to Bulk Power Regulator,
Primary Rack
- MEDIA DEVICES
- (#2591) - External USB 1.44 MB Diskette Drive
- LINECORDS
- (#6470) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4
- (#6471) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug
Type #70
- (#6472) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #18
- (#6473) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type 19
- (#6474) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug
Type #23
- (#6475) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #32
- (#6476) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #24
- (#6477) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #22
- (#6478) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #25
- (#6479) - Power Cord (9-foot) , To Wall/OEM PDU, (250V, 10A), Plug
Type #6
- (#6487) - Power Cord (6-foot) ,To Wall, (250V, 15A), United States,
Plug Type #5
- (#6488) - Power Cord (9-foot) , To Wall/OEM PDU, (125V, 15A or 250V,
10A), Plug Type #2
- (#6493) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #62
- (#6494) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #69
- (#6495) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #73
- (#6496) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #66
- (#6651) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A),
Plug Type #75
- (#6659) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A),
Plug Type #76
- (#6670) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59
(Denan marking)
- (#6680) - Power Cord (9-foot) , To Wall/OEM PDU, (250V, 10A), Plug
Type #6, Insulated
- (#6687) - Power Cord (6-foot),To Wall, (250V, 15A), Plug Type #5
(Denan marking)
- (#8677) - Line Cord, 8AWG, 14ft, No Plug
- (#8686) - Line Cord, 6AWG, 14ft, IEC309 100A Plug
- (#8687) - Line Cord, 6AWG, 6ft, IEC309 100A Plug
- (#8688) - Line Cord, 6AWG/Type W, 14ft, IEC309 60A Plug
- (#8689) - Line Cord, 6AWG/Type W, 6ft, IEC309 60A Plug
- (#8694) - Line Cord, 6AWG, 14ft, No Plug
- (#8697) - Line Cord, 8AWG, 14ft, IEC309 30A Plug
- (#8698) - Line Cord, 8AWG, 6ft, IEC309 30A Plug
- MISCELLANEOUS
- (#3755) - Service Ladder
- (#3756) - Service Tool Kit, High Performance Switch
- (#3758) - Service Lift
- (#7944) - Advanced POWER Virtualization
- (#8841) - Mouse - Business Black with Keyboard Attachment Cable
- (#7209) - I/O Assembly without PCI-X or RIO-2 capability
- (#7210) - I/O Assembly with PCI-X and RIO-2 capability
- RACK RELATED
- (#5791) - I/O Drawer, 20 Slots, 16 Disk Bays
- (#5794) - I/O Drawer, 20 Slots, 8 Disk Bays
- (#6245) - EMC Skirts/Tailgate
- (#6251) - Slim Line Doors
- (#6252) - Acoustic Doors
- (#6851) - Slim Line Doors OEM, System and #5792 Racks
- (#6852) - Acoustic Doors OEM, System and #5792 Racks
- (#6855) - Weight Distribution Plate
- (#7937) - Bolt-Down Kit, Low-Raised Floor
- (#7938) - Bolt-Down Kit, High-Raised Floor
- (#7939) - Bolt-Down Kit, Non-Raised Floor
- (#7945) - Slim Line Door Kit, System Rack
- (#7947) - Acoustic Door Kit, System Rack
- SPECIFY CODES
- (#0212) - Rack Content Specify: 7045/SW4 - 4U
- (#9004) - Southern Hemisphere Designator for Monitors
Feature Descriptions
The following is a list of all feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.
The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.
(#0191) RACK CONTENT SPECIFY: I/O Drawer - 4 EIA
Indicator of rack space utilization for I/O Drawers (#5791, #5794,
#4643).
- Attributes provided: Indicator of rack space utilization
- Attributes required: 4U of rack space
- For 9118-575: (#0191)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#0212) - Rack Content Specify: 7045/SW4 - 4U
Indicator of rack space utilization for 7045/SW4.
- Attributes provided: Indicator of rack space utilization
- Attributes required: 4U of rack space
- For 9118-575: (#0212)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#0265) AIX Partition Specify
This feature number is used to indicate the number of partitions the
system will have running under AIX.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#0265)
- Minimum required: 0
- Maximum allowed: 80 (Initial order maximum: 80)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#0266) Linux Partition Specify
This feature number is used to indicate the number of partitions the
system will have running under Linux.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#0266)
(#0268) Rack Content Specify: 9118-575
Indicator of presence of 9118-575 node within a #5793 rack, used for
initial orders.
- Attributes provided: Indicator of node within the rack
- Attributes required: 2U of rack space
- For 9118-575: (#0268)
- Minimum required: 0
- Maximum allowed: 12 (Initial order maximum: 12)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#1811) GX Dual-port 4x IB HCA
The #1811, GX Dual-port 4x InfiniBand Host Channel Adapter, provides
the attachment to the Topspin Server Switch models 120 and 270. The
adapter plugs into the GX bus slot of the p5-575. Connection to the
Topspin Server Switches are accomplished by using the 4x IB Cables.
Within the rack, the location of the #1811 will alternate between the
left side and the right side of the p5-575 for cable management. #1811
occupies the space of one PCI-X adapter within the server, reducing the
available PCI-X slots by one.
- Attributes provided: 2 ports of 4x IB to attach to the Topspin
Server Switch models 120 and 270
- Attributes required: Available GX position in the p5-575
- For 9118-575: (#1811)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.3, or later. SUSE LINUX Enterprise Server
9 for POWER, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#1835) 3 meter 4x IB Cable
This 3 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 3 meter 4x IB cable
- Attributes required: 4x IB port
- For 9118-575: (#1835)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1836) 8 meter 4x IB Cable
This 8 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 8 meter 4x IB cable
- Attributes required: 4x IB port
- For 9118-575: (#1836)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2425) 2.5M 16-bit SCSI-2 System-to-System Cable
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 9118-575: (#2425)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#2456) LC-SC 50 Micron Fiber Converter Cable
The 50 micron fiber cable is used to convert from LC type to SC type
connectors. The 2 meter cable has a male LC type connector on one end
and a female SC type connector on the other.
- Attributes provided: Attachment to external 50 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 9118-575: (#2456)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2459) LC-SC 62.5 Micron Fiber Converter Cable
The 62.5 micron fiber cable is used to convert from LC type to SC type
connectors. The 2 meter cable has a male LC type connector on one end
and a female SC type connector on the other.
- Attributes provided: Attachment to external 62.5 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 9118-575: (#2459)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2591) External USB 1.44 MB Diskette Drive
The externally attached USB diskette drive provides storage capacity
up to 1.44 MB on a high density (2HD) floppy disk and 720 KB on a double
density floppy disk. Includes 350mm (13.7 in) captured cable with
standard USB connector.
Limitation:
- Maximum 1 USB diskette per adapter,
- Up to 1 Keyboard and mouse also supported on the adapter with the
diskette drive at the same time
- No system boot capability
- Not to be operated upside down or with eject button down
Characteristics:
- Capacity - 1.44 MB (2HD disk) or 720 KB (double density disk)
- Physical Dimensions: Width=103mm (4.05 in), Height=17.6mm (.69 in),
Depth=141.8mm (5.58 in)
- Color: Black
- Data Rate: 12 Mbits/sec
- Max Power Consumption: 2.36 Watt (seek)
- Operates in all positions except those noted in the limitations above
- Attributes provided: External diskette drive
- Attributes required: 1 available USB port
- For 9118-575: (#2591)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2738) 2-Port USB PCI Adapter
The 2 Port USB PCI Adapter is a USB 2.0 capable adapter that provides
for the connection of one USB keyboard and mouse. Limitation: Limited
to USB 1.1 support with AIX
- Attributes provided: USB Keyboard/mouse Attachment
- Attributes required: One available PCI slot
- For 9118-575: (#2738)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#2849) POWER GXT135P Graphics Accelerator with Digital Support
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.
- Hardware Description:
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported:
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported:
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 9118-575: (#2849)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 9118-575: (#2943)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#2944) 128-Port Asynchronous Controller, PCI bus
(No Longer Available as of March 31, 2006)
The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.
RANs can also be used with this adapter. If these RANs are connected
the synchronous channel the data rate drops down to 1.2 Mbps. For the
best results keep the previous and new RAN's on separate synchronous
channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 9118-575: (#2944)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a
one-slot, standard length, 32-bit PCI card. The adapter provides
4-Ports of: EIA-232, EIA530, RS-449, X.21, or V.35. Each port will
support speeds of up 2.0M bps. Software support is provided by ARTIC960
Support for AIX, Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later
that provide SDLC and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1
or later that provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations. Go to to the
following URL to view the latest AIX 5.1 support limitation statements.
- http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: One to four WAN connections at up to 2.0Mbps
- Attributes required: One full length 32-bit PCI slot, AIX Version
4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5,
4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
- For 9118-575: (#2947)
- Minimum required: 0
- Maximum allowed: 20 (Initial order maximum: 20)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#2951) Cable, V.24 / EIA-232
V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- Attributes provided: V.24 Cable
- Attributes required: #2962 Adapter
- For 9118-575: (#2951)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2952) Cable, V.35
V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- Attributes provided: V.35 Cable
- Attributes required: #2962 Adapter
- For 9118-575: (#2952)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2953) Cable, V.36 / EIA-499
V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter.
Maximum of two cables per #2962.
- Attributes provided: V.36 Cable
- Attributes required: #2962 Adapter
- For 9118-575: (#2953)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2954) Cable, X.21
X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- Attributes provided: X.21 Cable
- Attributes required: #2962 Adapter
- For 9118-575: (#2954)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2962) 2-Port Multiprotocol PCI Adapter
This adapter provides high-speed connections between stand-alone
system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI
Adapter connects via external communications equipment including Channel
Service Units (CSU), Data Service Units (DSU), or through synchronous
modems.
This adapter together with IBM AIXlink/X.25 provides a two-port
connection to X.25 packet switched networks. IBM AIXlink/X.25 is a
separately orderable LPP (5696-926).
2-Port Multiprotocol PCI Adapter with an appropriate cable is
compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954):
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951):
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952):
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953):
- CCITT V.10 Electrical
- CCITT V.11 Electrical
- Attributes provided: Two high speed WAN connections
- Attributes required: One PCI slot
- For 9118-575: (#2962)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3125) Serial-to-Serial Port Cable for Rack/Rack
This 8 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted in
separate racks. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#3125)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3146) RIO-2(Remote I/O-2)Cbl, 1.2M
This 1.2-meter RIO-2 (Remote I/O-2) cable connects two RIO-2 based I/O
planars within an I/O drawer.
- Attributes provided: 1.2M RIO-2 Cable
- Attributes required: I/O Drawer and two RIO-2 I/O planars
- For 9118-575: (#3146)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3161) - Switch Cable (SNI), 1.2 meter, copper
The Switch Cable (SNI), 1.2 meter, copper, is used within the
pSeries High Performance Switch (HPS) network to enable copper
connections between the switch network interface (SNI) features
in the nodes to the switch port connection card within the HPS
for nodes in EIA locations 19 through 25. It is also used for
NSB to ISB switch connections when the NSBs and ISBs are in the
same multi-switch rack.
- Attributes provided: Switch Cable (SNI), 1.2 meter, copper
- Attributes required: None
- For 9118-575: (#3161)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3166) - Switch Cable (SNI), 3 meter, copper
The Switch Cable (SNI), 3 meter, copper, is used within the
pSeries High Performance Switch (HPS) network to enable copper
connections between the switch network interface (SNI) features
in the servers to the switch port connection card within the HPS.
- Attributes provided: Switch Cable (SNI), 3 meter, copper
- Attributes required: None
- For 9118-575: (#3166)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3167) - Switch Cbl.(SNI)10M Copper
The Switch Cable, 10 meter Copper, is used within the pSeries High
Performance Switch (HPS) network to enable copper connections
between the switch network interface (SNI) features in the servers
to the switch port connection card within the HPS. It is used
when the switch is in a different rack than the servers.
#3167 is also used for switch to switch connections between Node
Switch Boards (NSB's) or between NSB's and Intermediate Switch
Boards (ISB's).
- Attributes provided: Switch Cable, 10 meter Copper
- Attributes required: None
- For 9118-575: (#3167)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3168) RIO-2 (Remote I/O-2) Cbl, 2.5M
This 2.5 meter RIO-2 (Remote I/O-2) cable is utilized to connect RIO-2
based I/O planars and I/O drawers to the system CEC.
- Attributes provided: 2.5M RIO-2 Cable
- Attributes required: I/O Drawer and two RIO-2 connectors on the
system CEC.
- For 9118-575: (#3168)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3274) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry-standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9118-575: (#3274)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3275) 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry-standard Ultra320
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9118-575: (#3275)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3277) 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4
GB of storage capacity and supports the industry-standard Ultra3 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 36.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9118-575: (#3277)
- Minimum required: 0
- Maximum allowed: 18 (Initial order maximum: 18)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3278) 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry-standard Ultra3 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9118-575: (#3278)
- Minimum required: 0
- Maximum allowed: 18 (Initial order maximum: 18)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3279) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra3
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate:107 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9118-575: (#3279)
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage
Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9118-575: (#3578)
(#3636) L200P Flat Panel Monitor
The L200p flat-panel monitor has the following general
characteristics:
- Business black color
- 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm
(20.1 inches) measured diagonally, incorporating a 0.255 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9118-575: (#3636)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3637) IBM T541H /L150p 15" TFT Color Monitor
Both the T541H and L150p monitors have the following general
characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 9118-575: (#3637)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3638) IBM C220p 21-inch Color Monitor, Business Black, and Cable
(No Longer Available as of July 29, 2005)
The IBM C220p monitor has the following general characteristics:
- Business black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 9118-575: (#3638)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3639) IBM ThinkVision L170p Flat Panel Monitor
(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.264mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical 170 degrees; horizontal 170 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9118-575: (#3639)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
The IBM ThinkVision L171p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
- Contrast ratio: 500:1 (minimal) 700:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9118-575: (#3640)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3642) - ThinkVision L191p Flat Panel Monitor
The ThinkVision L191p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables, one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9118-575: (#3642)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3755) Service Ladder
This feature delivers the Service Ladder for components within the
higher drawers of the 9118-575 rack. Remove this feature from additional
rack orders to prevent multiple quantities of the Service Ladder from
being shipped. Also remove this feature if #7960 Compact Handling
feature is ordered. Every 9118-575 installation location with components
within the higher drawers of the rack must have access to one Service
Ladder. Failure to have at least one available in a location may result
in delayed or prolonged maintenance times.
(#3756) - Service Tool Kit, High Performance Switch
This feature delivers the Service Took Kit for the High Performance
Switch. Remove this feature from additional 7045-SW4 orders to prevent
multiple quantities of the Tool Kit from being shipped.
Every installation location with an HPS 7045-SW4 must have access to
one Service Tool Kit. Failure to have at least one available in a
location may result in delayed or prolonged maintenance times.
(#3758) - Service Lift
This feature delivers the Service Lift for p5-575. Every 9118-575
installation location with a p5-575 within the upper section of the rack
(EIA location 19 or higher) must have access to a Service Lift. Failure
to have at least one available in a location may result in delayed or
prolonged maintenance times. Remove this feature from additional rack
orders to prevent multiple quantities of the Service Lift from being
shipped.
- Attributes provided: Service Lift
- Attributes required: Rack with p5-575 in EIA location 19 or higher.
- For 9118-575: (#3758)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3800) Pwr.Cbl.Grp, 09U(or 09U Lft)
This feature provides redundant power cabling for a rack component in
EIA 09 (or in the left side of EIA 09, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 09
- For 9118-575: (#3800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#3803) Pwr.Cbl.Grp, 19U(or 19U Lft)
This feature provides redundant power cabling for a rack component in
EIA 19 (or in the left side of EIA 19, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 19
- For 9118-575: (#3803)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3804) Pwr.Cbl.Grp, 23U(or 23U Lft)
This feature provides redundant power cabling for a rack component in
EIA 23 (or in the left side of EIA 23, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 23
- For 9118-575: (#3804)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3805) Pwr.Cbl.Grp, 27U(or 27U Lft)
This feature provides redundant power cabling for a rack component in
EIA 27 (or in the left side of EIA 27, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 27
- For 9118-575: (#3805)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3806) Pwr.Cbl.Grp, 31U(or 31U Lft)
This feature provides redundant power cabling for a rack component in
EIA 31 (or in the left side of EIA 31, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 31
- For 9118-575: (#3806)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3807) Pwr.Cbl.Grp, 13U(or 13U Lft)
This feature provides redundant power cabling for a rack component in
EIA 13 (or in the left side of EIA 13, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 13
- For 9118-575: (#3807)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3810) Pwr.Cbl.Grp, 11U(or 09U Rt)
This feature provides redundant power cabling for a rack component in
EIA 11 (or in the right side of EIA 09, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 11 or right side of EIA 09
- For 9118-575: (#3810)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3813) Pwr.Cbl.Grp, 21U(or 19U Rt)
This feature provides redundant power cabling for a rack component in
EIA 21 (or in the right side of EIA 19, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 21 or right side of EIA 19
- For 9118-575: (#3813)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3814) Pwr.Cbl.Grp, 25U(or 23U Rt)
This feature provides redundant power cabling for a rack component in
EIA 25 (or in the right side of EIA 23, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 25 or right side of EIA 23
- For 9118-575: (#3814)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3815) Pwr.Cbl.Grp, 29U(or 27U Rt)
This feature provides redundant power cabling for a rack component in
EIA 29 (or in the right side of EIA 27, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 29 or right side of EIA 27
- For 9118-575: (#3815)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3816) Pwr.Cbl.Grp, 33U(or 31U Rt)
This feature provides redundant power cabling for a rack component in
EIA 33 (or in the right side of EIA 31, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 33 or right side of EIA 31
- For 9118-575: (#3816)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3817) Pwr.Cbl.Grp, 15U(or 13U Rt)
This feature provides redundant power cabling for a rack component in
EIA 15 (or in the right side of EIA 13, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 15 or right side of EIA 13
- For 9118-575: (#3817)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin
This cable converts the 9-pin serial port on the system
to a 25-pin serial port which allows the user to attach
25-pin serial devices to the system.
- Attributes provided: 9-Pin to 25-Pin connectivity
- Attributes required: None
- For 9118-575: (#3925)
- Minimum required: 0
- Maximum allowed: 48 (Initial order maximum: 48)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4242) 6-Foot Extender Cable for Displays (15-pin D-shell to 15-pin D-shell)
This cable is required to connect displays with a 15-pin "D" shell
connector to the appropriate accelerator connector when it is farther
away than the attached monitor cable can reach. Rack mounted systems are
likely candidates for this extender cable.
- Attributes provided: 6-foot extension cable
- Attributes required: Supported monitor and adapter with a 15-pin "D"
shell connector.
- For 9118-575: (#4242)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4256) Extender Cable - USB Keyboards, 2M
This feature provides a 2M extension cable for use with USB keyboards.
- Attributes provided: 2M Extension Cable
- Attributes required: USB Keyboard
- For 9118-575: (#4256)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4444) 1024MB (4x256MB) DIMMs, 208-pin, 266 MHz DDR SDRAM
Provides 1024MB of system memory with 4 256MB DIMMs.
- Attributes provided: 1024MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 9118-575: (#4444)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4452) 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 2048MB of system memory with 4 512MB DIMMs.
- Attributes provided: 2048MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 9118-575: (#4452)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4454) 8192MB (4x2048MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
Provides 8192MB of system memory with 4 2048MB DIMMs.
- Attributes provided: 8192MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 9118-575: (#4454)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4490) 4096MB (4x1024MB) DIMMs, 208-pin, 250MHz Stacked DDR1 SDRAM
Provides 4096MB of system memory with 4 1024MB DIMMs.
- Attributes provided: 4096MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 9118-575: (#4490)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4491) 16384MB (4x4096MB) DIMMs, 208-pin, 250MHz Stacked DDR1 SDRAM
Provides 16384MB of system memory with 4 4096MB DIMMs.
- Attributes provided: 16384MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 9118-575: (#4491)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4599) PCI Blind Swap Cassette Kit, Single Wide Adapters, Universal
This feature contains a blind swap cassette for single slot width PCI
adapters. It also includes the necessary hardware to adapt the cassette
to mount various sizes of PCI cards.
- Attributes provided: Blind swap PCI cassette
- Attributes required: PCI card and empty PCI adapter location
- For 9118-575: (#4599)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 0)
- OS level required:
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#4643) 7040-61D I/O Drawer Attachment Indicator
This feature indicates that a 7040-61D I/O drawer is being attached to
the system.
- Attributes provided: 7040-61D I/O drawer indicator
- Attributes required: Empty I/O drawer location and RIO-2 ports
- For 9118-575: (#4643)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4644) - 7045-SW4 Migrated Drawer Indicator
This feature indicates that a 7045-SW4 drawer is being migrated
to a POWER5 rack environment. It is used to determine rack level
power and cable requirements for the migrated location.
(#4651) Rack Indicator, Rack #1
This indicator is used to specify the first rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the first rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4651)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4652) Rack Indicator, Rack #2
This indicator is used to specify the second rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the second rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4652)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4653) Rack Indicator, Rack #3
This indicator is used to specify the third rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the third rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4653)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4654) Rack Indicator, Rack #4
This indicator is used to specify the fourth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fourth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4654)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4655) Rack Indicator, Rack #5
This indicator is used to specify the fifth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fifth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4655)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4656) Rack Indicator, Rack #6
This indicator is used to specify the sixth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the sixth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4656)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4657) Rack Indicator, Rack #7
This indicator is used to specify the seventh rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the seventh rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4657)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4658) Rack Indicator, Rack #8
This indicator is used to specify the eighth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the eighth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4658)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4659) Rack Indicator, Rack #9
This indicator is used to specify the ninth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the ninth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4659)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4660) Rack Indicator, Rack #10
This indicator is used to specify the tenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the tenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4660)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4661) Rack Indicator, Rack #11
This indicator is used to specify the eleventh rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the eleventh rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4661)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4662) Rack Indicator, Rack #12
This indicator is used to specify the twelfth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the twelfth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4662)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4663) Rack Indicator, Rack #13
This indicator is used to specify the thirteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the thirteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4663)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4664) Rack Indicator, Rack #14
This indicator is used to specify the fourteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fourteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4664)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4665) Rack Indicator, Rack #15
This indicator is used to specify the fifteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fifteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4665)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4666) Rack Indicator, Rack #16
This indicator is used to specify the sixteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the sixteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 9118-575: (#4666)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4671) First Shared I/O Drawer, Indicator
#4671 is used to identify the connectivity and associativity when two
9118-575's connect to the first shared I/O drawer (either #5794 or
#5791)in the #5793 rack. This enables the correct number of PCI-X
adapter slots and the correct number of disk bays to be assigned to each
of the nodes. These indicators would be ordered on each of the 575 nodes
that connect to the first shared I/O drawer.
- Attributes provided: Indicator of first shared I/O drawer.
- Attributes required: Two 575's connecting to the first shared I/O
drawer in the #5793 rack.
- For 9118-575: (#4671)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4672) Second Shared I/O Drawer, Indicator
#4672 is used to identify the connectivity and associativity when two
9118-575's connect to the second shared I/O drawer (either #5794 or
#5791)in the #5793 rack. This enables the correct number of PCI-X
adapter slots and the correct number of disk bays to be assigned to each
of the nodes. These indicators would be ordered on each of the 575 nodes
that connect to the second shared I/O drawer.
- Attributes provided: Indicator of second shared I/O drawer.
- Attributes required: Two 575's connecting to the second shared I/O
drawer in the #5793 rack.
- For 9118-575: (#4672)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4673) Third Shared I/O Drawer, Indicator
#4673 is used to identify the connectivity and associativity when two
9118-575's connect to the third shared I/O drawer (either #5794 or
#5791)in the #5793 rack. This enables the correct number of PCI-X
adapter slots and the correct number of disk bays to be assigned to each
of the nodes. These indicators would be ordered on each of the 575 nodes
that connect to the third shared I/O drawer.
- Attributes provided: Indicator of third shared I/O drawer.
- Attributes required: Two 575's connected to the third shared I/O
drawer in the #5793 rack.
- For 9118-575: (#4673)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4674) Fourth Shared I/O Drawer, Indicator
#4674 is used to identify the connectivity and associativity when two
9118-575's connect to the fourth shared I/O drawer (either #5794 or
#5791)in the #5793 rack. This enables the correct number of PCI-X
adapter slots and the correct number of disk bays to be assigned to each
of the nodes. These indicators would be ordered on each of the 575 nodes
that connect to the fourth shared I/O drawer.
- Attributes provided: Indicator of fourth shared I/O drawer.
- Attributes required: Two 575's connected to the fourth shared I/O
drawer in the #5793 rack.
- For 9118-575: (#4674)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4959) IBM Token-Ring PCI Adapter
(No Longer Available as of March 31, 2006)
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short,
32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either
half-duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into
the ring, even when connected to speed-sensing hubs. This adapter will
operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45
connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin
D-shell connectors. The Token-Ring PCI Adapter will provide network boot
capability.
- Attributes provided:
- Attributes required: A single empty 32-bit PCI adapter slot.
- For 9118-575: (#4959)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4962) 10/100 Mbps Ethernet PCI Adapter II
(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
- Half / Full Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates)and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 9118-575: (#4962)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5005) Software Preinstall
Licensed programs may be preinstalled on the media selected. To order
this option, specify code (#5005) on the initial system order. The
preinstalled licensed programs will be at the same release level as
programs being shipped from the Program Libraries at the time the system
is manufactured.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#5005)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 9118-575: (#5700)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64 bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 9118-575: (#5701)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full
Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#5701) is the preferred solution.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 9118-575: (#5706)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 9118-575: (#5707)
- Minimum required: 0
- Maximum allowed: 20 (Initial order maximum: 20)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5710) PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter
(No Longer Available as of March 31, 2006)
The PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter (#5710) is a
64-bit 3.3 volt adapter and is an excellent solution for high-performance
SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Blind Swap
Adapter provides two SCSI channels (busses), each capable of running 320
MBps (max.), up to twice the maximum data transfer rate of the previous
Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be
internal (on systems that support internal SCSI device or backplane
attachments) or external. Internally attached Ultra320 devices are
designed to run at a data rate of up to 320 MB per second on systems that
have internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two industry-standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI Blind Swap Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate. The two external ports also
provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1
Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also
the two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/Web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter (#5710) is a
native boot adapter with AIX 5.1 or AIX 5.2 software in a supported
pSeries or RS/6000 systems. The adapter also supports target mode.
Limitations:
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the
internally attached disk drives will run at a maximum SCSI bus data rate
specified by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available 3.3 volt PCI or PCI-X slot
- For 9118-575: (#5710)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5711) PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
The PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter (#5711)
is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID
Adapter providing RAID 0,5, or 10 capability and can address up to thirty
16-bit SCSI physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 40 MByte non-volitile
fast-write cache is provided as a resident part of this adapter. The 40
MByte fast-write cache can provide a significant improvement in data
throughput and response time during certain sequence write operations
compared to SCSI RAID adapters without the fast-write cache. The
response time and data transfer improvement will vary depending upon the
data block sizes, the percentage of sequential writes, machine
type/model, and application parameters.
The Dual Channel Ultra320 SCSI RAID Blind Swap Adapter has two
independent ultra320 SCSI buses. There are two internal ports and two
external ports. The two internal ports are shared with the two external
ports. The SCSI busses can drive either an internal port or an external
port. The internal ports can be used to provide an internal RAID
solution on certain supporting pSeries systems with internal multiple
disk drives or packs of drives. Internally attached Ultra320 devices are
designed to run at a data rate of up to 320 MB per second on systems that
have internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or external ports) are required to be formatted to 522 byte
sectors. 522 byte sectors provide additional CRC error checking for
improved data integrety. A menu option is provided in the AIX supporting
software which will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array, a similar
menu option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. Also, there are
some disk drives which do not support being formatted to 522 Byte
Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these
known situations when they exist. For disk microcode updates, go to the
following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two industry-standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI RAID Blind Swap Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate configured as either a non-array or
an array of disks Also the two external ports provide non-array
connectivity to numerous other SCSI external subsystems. Check the
external subsystem sales/Web pages for verification of connectivity
support with this adapter.
Limitations:
- The two external ports provide connectivity to an IBM 2104-DU3
Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower
at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only
non-array configuration support.
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the
internally attached disk drives will run at a maximum SCSI bus data rate
specified by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI or PCI-X bus slot
- For 9118-575: (#5711)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5716) 2 Gigabit Fibre Channel PCI-X Adapter
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber onnector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
- http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 9118-575: (#5716)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5718) 10 Gigabit Ethernet -SR PCI-X Adapter
Provides 10 Gigabit Ethernet PCI-X based server connections. Supports
distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um
multimode fiber with 2000MHz km minimum model bandwith at 850 nm.
Adapter connector type is LC.
- Attributes provided: Provides highend bandwith for networking
- Attributes required: Supported on PCI-X slots only
- For 9118-575: (#5718)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter
Offers 10 Gigabit Ethernet PCI-X based server connections over a
maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The
adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um
single-mode fiber optic cables and uses a SC connector type for
connecting into net-work infrastructure components like 10 Gigabit
Ethernet switch/router with SC connectors.
- Attributes provided: 10 Gigabit Ethernet connections
- Attributes required: Available PCI-X slot
- For 9118-575: (#5719)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5723) 2-Port Asynchronous IEA-232 PCI Adapter
Connection for 2 Asynchronous EIA-232 devices. Ports are Programmable
to support EIA-232 protocols, at a line speed of 128K bps.
- Attributes provided: 2 Asynchronous Ports
- Attributes required: One PCI Slot
- For 9118-575: (#5723)
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 24)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Note: 1) (3925) - Serial Port Converter Cable, 9-pin to
25-pin is rquired (0.3m).
(#5791) I/O Drawer, 20 Slots, 16 Disk Bays
This feature provides a 4U high I/O drawer containing twenty PCI-X
slots and sixteen hot-swap disk bays. This drawer attaches to the
central electronics complex via RIO-2 attachment cables.
- Attributes provided: 20 PCI-X slots, 16 disk bays
- Attributes required: Available RIO-2 attachment ports
- For 9118-575: (#5791)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5736) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5736) is a 64-bit 3.3
volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X DDR Dual Channel Ultra320 SCSI Adapter provides
two SCSI channels (busses), each capable of running 320 MBps (max.).
Each SCSI bus can either be internal (on systems that support internal
SCSI device or backplane attachments) or external. Internally attached
Ultra320 devices are designed to run at a data rate of up to 320 MB per
second on systems that have internal backplanes that are capable of
supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two VHDCI 68-pin connectors are mounted on the adapter's end bracket
allowing attachment of various LVD and SE external subsystems. A .3
meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be
used with older external SE devices or subsystems to allow connection to
the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter.
The two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/Web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5736) is a native boot
adapter with AIX 5L for POWER Version 5.2 with the 5200-07 Recommended
Maintenance package (APAR IY67914) or AIX 5L for POWER Version 5.3 with
the 5300-03 Recommended Maintenance package (APAR IY71011) or later
software in a supported pSeries or RS/6000 systems. The adapter also
supports target mode.
Limitations:
- Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- To obtain microcode update go to the following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
(#5793) System Rack
This feature provides a 24" wide, 42U powered system rack for the
9118-575. The power subsystem resides in the upper 8U of the rack, and
also provides the ethernet hub function within the rack.
- Attributes provided: System rack
- Attributes required: None
- For 9118-575: (#5793)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5794) I/O Drawer, 20 Slots, 8 Disk Bays
This feature provides a 4U high I/O drawer containing twenty PCI-X
slots and eight hot-swap disk bays. This drawer attaches to the central
electronics complex via RIO-2 attachment cables.
- Attributes provided: 20 PCI-X slots, 8 disk bays
- Attributes required: Available RIO-2 attachment ports
- For 9118-575: (#5794)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6186) Bulk Power Regulator
Bulk power regulators provide increments of power for use by the
systems components such as fans, CEC components, and I/O drawers.
- Attributes provided: Regulated Power
- Attributes required: Bulk power assembly.
- For 9118-575: (#6186)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6200) Integrated Battery Backup, Primary or Redundant-Front Mounted
The Primary Integrated Battery Backup features provide batteries to be
connected to the bulk power regulators of the front bulk power assembly.
These batteries protect against power line disturbances as well as power
failures involving both redundant power sources or the front power source
and the rear bulk power assembly. The batteries provide sufficient
backup power to allow an orderly system shutdown. #6200 is also used for
the unique application of the redundant front mounted integrated battery
backup feature connected to the rear bulk power regulators.
(#6201) Integrated Battery Backup, Redundant Rear Mounted
The Redundant Integrated Battery Backup features provide batteries to
be connected to the bulk power regulators of the rear bulk power
assembly. These batteries protect against power line disturbances as
well as power failures involving both redundant power sources. They also
protect against failure of both power sources at the same time as a
failure of the primary battery backup or the front bulk power assembly.
The batteries provide sufficient backup power to allow an orderly system
shutdown.
(#6204) PCI Universal Differential Ultra SCSI Adapter
(No Longer Available as of December 30, 2005)
The PCI Universal Differential Ultra SCSI Adapter is the latest
technology advancement of an RS/6000 SCSI-2 differential adapter with a
maximum data transfer rates of 40 MBytes per second. This adapter has
the capability to be plugged into the newer +3.3 volt PCI slots as well
as the older +5 volt PCI slots. Feature code # 6204 allows connection to
external differential SCSI-2 F/W or Ultra SCSI type devices up to 25
meters away. Feature code # 6204 will negotiate with each external
device and transfer data at the fastest SCSI data transfer rate capable
by the external device. Check system sales pages as to which external
differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra)
documentation. Industry-standard 68 pin connectors are incorporated
(SCSI "P" connector definition of X3T9.2/90-048).
- Attributes provided: 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 9118-575: (#6204)
- Minimum required: 0
- Maximum allowed: 11 (Initial order maximum: 11)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6240) Cable, Integrated Battery Backup to Bulk Power Regulator, Primary Rack
This cable provides a connection between the integrated battery backup
features located in the primary rack and the bulk power regulators
located in the front and rear bulk power assemblies. One cable is
required for each primary and redundant integrated battery backup feature
installed in the primary rack.
- Attributes provided: Battery Backup Attachment Cable
- Attributes required: Primary or Redundant Integrated Battery Backup
Features.
- For 9118-575: (#6240)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6245) - EMC Skirts/Tailgate
#6245 is used when the High Performance Switch, 7045-SW4, or the SNI
adapter #7910, is installed in the #5793 rack. This feature drives
the rack level EMC skirts/tailgate parts.
- Attributes provided: EMC Skirts/Tailgate
- Attributes required: 7045-SW4 or #7910 in #5793
- For 9118-575: (#6245)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6251) - Slim Line Doors
This feature provides front and rear doors for use with the
24 inch racks that have the power sub-system in the rack. This
slim line door kit provides a minimized footprint for use where
conservation of space is desired.
- Attributes provided: Slim line Door Kit
- Attributes required: 24 inch rack with power sub-system
- For 9118-575: (#6251)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6252) - Acoustic Doors
This feature provides front and rear doors for use with the
24 inch racks that have the power sub-system in the rack. This
door kit provides acoustic dampening for use where a quieter
environment is desired.
- Attributes provided: Acoustic Door Kit
- Attributes required: 24 inch rack with power sub-system
- For 9118-575: (#6252)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6267) Power Distribution Jumper Assembly, High Current
This feature provides a power distribution jumper assembly and cables
for high current applications to enable the power output load sharing at
the frame level.
- Attributes provided: Power Distribution Jumper assembly/cables
- Attributes required: High current frame configuration
- For 9118-575: (#6267)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6470) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #4 (NEMA 5-15). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. 6-foot length. The
following countries/regions use the #6470 power cord to power the system
and/or peripheral features requiring a power cord:
United States, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize,
Bermuda, Bolivia, Bonnaire, Calicos Islands, Canada, Cayman Islands,
Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador,
El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica,
Japan, Mexico, Micronesia, Montsderrrrat, Netherlands Antilles,
Nicaragua, Panama, Peru, Phillipines, St. Kitts/Nevis, St. Martin,
Taiwan, Tortola (BVI), Trinidad/Tobago, Venezuela.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6470)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6471) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #70
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #70 (iNMETRO NBR 6147, NEMA 5-15). Refer to
Corporate Bulletin C-B-2-4700-009 for a description of plug types. The
following countries/regions use the #6471 power cord to power the system
and/or peripheral features requiring a power cord:
Brazil.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6471)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6472) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #18
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #18 (CEE 7 VII). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6472 power cord to power the system and/or
peripheral features requiring a power cord:
Afghanistan, Albania, Algeria, Andorra, Angola, Armenia, Austria,
Belarus, Belgium, Benin, Bosnia/Herzegovina, Bulgaria, Burkina Faso,
Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic,
Chad, Comoros, Conogo, Croatia, Czech Republic, Dahomey, Djibuouti,
Egypt, Equatorial Guinea, Eritrea, Estonia, Etrhiopia, Finland,
France, French Polynesia, French Guyana, Gabon, Georgia, Germany,
Greece, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland,
Indonesia, Iran, Ivory Coast, Kazakhstan, Krygystan, Laos, Latvia,
Lebanon, Lintuania, Luxembourg, Macau, Macedonia, Mali, Martinigue,
Mauritania, Mauritus, Mayotte, Moldova, Monaco, Mongolia, Morocco,
Mozambique, Netherlands, New Caledonia, Niger, North Korea (C19
only), Norway, Poland, Portugal, Principe, Reunion, Romania, Russia,
Rwanda, St. Thomas, Saudi Arabia, Senegal, Serbia, Slovenia,
Somalia, South Korea (C19 only), Spain, Surinam, Sweden, Syria,
Tahiti, Tajikistan, Togo, Tunesia, Turkey, Turkmenistan, Ukraine,
Upper Volta, Uzbekistan, Vanuatu, Vietnam, Wallis & Futuna, Zaire,
Zimbabwe.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6472)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6473) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type 19
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #19 (CEE). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6473 power cord to power the system and/or
peripheral features requiring a power cord: ;p.Denmark.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6473)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6474) Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug Type #23
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #23 (BS 1364A). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6474 power cord to power the system and/or
peripheral features requiring a power cord:
Abu Dhabi, Bahrain, Botswana, Brunei, Channel Islands, Cyprus,
Dominica, Gambia, Grenada, Grenadines, Guyana, Hong Kong, Iraq,
Ireland, Jordan, Kenya, Kuwait, Liberia, Malawi, Malaysia, Malta,
Myanmar, Nkigeria, Oman, Qatar, Sierra Leone, Singapore, St. Kitts,
St. Lucia, Seychelles, Sudan, Tanzania, Trinidad & Tobago, United
Arab Emirates, United Kingdom, Yemen, Zambia
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6474)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6475) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #32
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #32 (SII 32-1971). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6475 power cord to power the system and/or
peripheral features requiring a power cord:
Israel.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6475)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6476) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #24
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #24 (SEV 24507). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6476 power cord to power the system and/or
peripheral features requiring a power cord:
Lichtenstein, Switzerland.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6476)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6477) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #22
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #22 (SABS 164). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6477 power cord to power the system and/or
peripheral features requiring a power cord:
Bangladesh
LeSotho
Maceo
Maldives
Nambia
Pakistan
Samoa
South Africa
Sri Lanka
Swaziland
Uganda
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6477)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6478) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #25
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #25 (CEI 23-16). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6478 power cord to power the system and/or
peripheral features requiring a power cord:
Chile, Italy, Libya.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6478)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6479) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6
(No Longer Available as of June 24, 2005)
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198). Refer to
Corporate Bulletin C-B-2-4700-009 for a description of plug types. The
following countries/regions use the #6479 power cord to power the system
and/or peripheral features requiring a power cord:
Australia
Fiji Islands
Kiribati
Nauru
New Zealand
Papua New Guinea
W. Samoa
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6479)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6487) Power Cord (6-foot), To Wall, (250V, 15A), United States, Plug Type #5
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. 6-foot length. The
following countries/regions use the #6487 power cord to power the system
and/or peripheral features requiring a power cord:
United States, Anguilla, Antigua & Barbuda, Aruba, Bahamas, Barbados,
Belize, Bermuda, Bolivia, Bonnaire, Caicos Is., Canada, Cayman Islands,
Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El
Salvador, Guam, Guatamala, Haiti, Honduras, Jamaica, Japan, Micronesia,
Montserrat, Netherlands Antilles, Nicaragua, Panama, Peru, Phillipines,
St. Marten NA, Taiwan, Tortola (BVI), Thailand, Venezuela.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6487)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6488) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A or 250V, 10A), Plug Type #2
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Refer to Corporate Bulletin C-B-2-4700-009 for a
description of plug types. The following countries/regions use the #6488
power cord to power the system and/or peripheral features requiring a
power cord:
Argentina, Paraguay, Uruguay.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6488)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6493) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #62
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #62 (GB 1053). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6493 power cord to power the system and/or
peripheral features requiring a power cord:
People's Republic of China.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6493)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6494) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #69
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #69 (IS 6538). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6494 power cord to power the system and/or
peripheral features requiring a power cord:
India.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6494)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6495) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #73
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #73. Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6495 power cord to power the system and/or
peripheral features requiring a power cord:
Brazil.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6495)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6496) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #66
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #66 (KETI). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6496 power cord to power the system and/or
peripheral features requiring a power cord:
North Korea, South Korea.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6496)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6651) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75
This power cord goes from the system and/or peripheral features to
a wall-type outlet. Plug type #75 (KETI). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types.
The following countries/regions use the #6651 power cord to power
the system and/or peripheral features requiring a power cord: Taiwan
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6651)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6659) Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76
This power cord goes from the system and/or peripheral features to
a wall-type outlet. Plug type #76 (KETI). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types.
The following countries/regions use the #6659 power cord to power
the system and/or peripheral features requiring a power cord: Taiwan
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6659)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6670) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (Denan marking)
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #59 (NEMA 5-15). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length.
This power cord meets the Denan marking requirement in Japan.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6670)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6680) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated
This insulated power cord goes from the system and/or peripheral
features to a wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198).
Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug
types. The following countries/regions use the #6479 power cord to power
the system and/or peripheral features requiring a power cord:
Australia
Fiji Islands
Kiribati
Nauru
New Zealand
Papua New Guinea
W. Samoa
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6680)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6687) Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #5 (Denan marking)
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. 6-foot length. This
power cord meets the Denan marking requirement in Japan.
- Attributes provided: Power cord
- Attributes required: None
- For 9118-575: (#6687)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6850) Weight Reduction Option
This feature allows the System Rack to utilize elevators that have a
2500 pound weight limitation. This feature can also be ordered for any
shipping application where the weight needs to be reduced on the rack to
below 2500 pounds.
(#6851) Slim Line Doors OEM, System and #5792 Racks
This feature provides OEM front and rear doors for use with the
primary system rack or the #5792 Powered Expansion Rack. This slimline
door kit provides a minimized footprint for use where conservation of
space is desired.
- Attributes provided: OEM Slimline Door Kit
- Attributes required: System rack or #5792 expansion rack
- For 9118-575: (#6851)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6852) Acoustic Doors OEM, System and #5792 Racks
This feature provides OEM front and rear doors for use with the
primary system rack or the #5792 Powered Expansion Rack. This door kit
provides acoustic dampening for use where a quieter environment is
desired.
- Attributes provided: OEM Acoustic Door Kit
- Attributes required: System rack or #5792 expansion rack
- For 9118-575: (#6852)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6855) Weight Distribution Plate
This feature delivers the weight distribution plate for rack.
- Attributes provided: Weight Distribution Plate
- Attributes required: None
- For 9118-575: (#6855)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Note: This feature delivers the weight distribution plate for the #5793
rack. It is to be assigned by the configurator for the following
conditions: If there is no internal battery feature present (#6200),
then assign #6855 when there is rack content in the sixth rack drawer
(the sixth drawer has UPIC #3805). If there is internal battery feature
present (#6200), then assign #6855 when there is rack content in the
fourth rack drawer (the fourth rack drawer has UPIC #3803). This feature
#6855 may also be ordered below these drawer assignments at initial rack
install to avoid installation in the future when content is added to the
rack.
(#7209) I/O Assembly without PCI-X or RIO-2 capability
This feature provides an I/O Assembly without PCI-X or RIO-2
capability. It includes the I/O Planar, four 10/100/1000 ethernet ports,
two Disk bays and two 10/100 BaseT ethernet ports (for HMC connectivity).
This I/O assembly would be selected for a CPU intensive node.
(#7210) I/O Assembly with PCI-X and RIO-2 capability
This feature provides an I/O Assembly with PCI-X and RIO-2 capability.
It includes the I/O Planar, four 10/100/1000 ethernet ports, two Disk
bays, four PCI-X slots, RIO-2 Connections for I/O drawer attachment, and
two 10/100 BaseT ethernet ports (for HMC connectivity). This I/O
assembly would be selected for an I/O intensive node.
(#7657) - 16 Way 1.5GHz POWER5 CPU
This feature provides a 16-Way 1.5GHz POWER5 Processor, 288 MB L3
Cache, and System Planar. The System Planar incorporates up to 64 memory
DIMM slots.
- Attributes provided: 16-Way 1.5GHz POWER5 Processor, 288 MB L3 Cache
System Planar.
- Attributes required: 9118-575 Model
- For 9118-575: (#7657)
(#7801) Ethernet Cable, 6M, Hardware Management Console to System Unit
This feature provides a six meter long Ethernet cable for attachment
of a Hardware Management Console to the system unit.
- Attributes provided: 6M Ethernet Cable
- Attributes required: Ethernet port on Hardware Management Console
- For 9118-575: (#7801)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7802) Ethernet Cable, 15M, Hardware Management Console to
System Unit
This feature provides a fifteen meter long Ethernet cable for
attachment of a Hardware Management Console to the system unit.
- Attributes provided: 15M Ethernet Cable
- Attributes required: Ethernet port on Hardware Management Console
- For 9118-575: (#7802)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7803) Bulk Power Controller Assembly
This power controller provides the base power connections for the
internal power cables.
(#7836) 8-Way 1.9GHz POWER5 Processor, 288 MB L3 Cache and System Planar
This feature provides an 8-Way 1.9GHz POWER5 Processor, 288 MB L3
Cache, and System Planar. The System Planar incorporates up to 64 memory
DIMM slots.
- Attributes provided: 8-Way 1.9GHz POWER5 Processor, 288 MB L3 Cache
System Planar.
- Attributes required: 9118-575 Model
- For 9118-575: (#7836)
(#7837) Bulk Power Distribution Assembly
This Power distribution assembly provides connector locations for
cable attachment of I/O drawers and CEC DC power converters.
- Attributes provided: 10 power connectors
- Attributes required: none
- For 9118-575: (#7837)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7843) Pwr.Cbl.Grp, 03U(or 01U Rt)
This feature provides redundant power cabling for a rack component in
EIA 03 (or in the right side of EIA 01, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 03 or right side of EIA 01
- For 9118-575: (#7843)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7844) Pwr.Cbl.Grp, 01U(or 01U Lft)
This feature provides redundant power cabling for a rack component in
EIA 01 (or in the left side of EIA 01, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 01
- For 9118-575: (#7844)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7845) Pwr.Cbl.Grp, 07U(or 05U Rt)
This feature provides redundant power cabling for a rack component in
EIA 07 (or in the right side of EIA 05, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 07 or right side of EIA 05
- For 9118-575: (#7845)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7846) Pwr.Cbl.Grp, 05U (or 05U Lft)
This feature provides redundant power cabling for a rack component in
EIA 05 (or in the left side of EIA 05, as viewed from the front of the
rack) of the primary system rack.
- Attributes provided: Redundant Power Cables
- Attributes required: Component in EIA 05
- For 9118-575: (#7846)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7853) - Power Cables, 4x, 01U
This feature provides redundant power cabling for a 4 EIA drawer
with the bottom of the drawer positioned at the 1U location of the rack.
- Attributes provided: Redundant Drawer Power Cables
- Attributes required: None
- For 9118-575: (#7853)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7854) - Power Cables, 4x, 05U
This feature provides redundant power cabling for a 4 EIA drawer
with the bottom of the drawer positioned at the 5U location of the rack.
- Attributes provided: Redundant Drawer Power Cables
- Attributes required: None
- For 9118-575: (#7854)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7856) - Power Cables, 4x, 13U
This feature provides redundant power cabling for a 4 EIA drawer
with the bottom of the drawer positioned at the 13U location of the rack.
- Attributes provided: Redundant I/O Drawer Power Cables
- Attributes required: None
- For 9118-575: (#7856)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7857) - Power Cables, 4x, 19U
This feature provides redundant power cabling for a 4 EIA drawer
with the bottom of the drawer positioned at the 19U location of the rack.
- Attributes provided: Redundant I/O Drawer Power Cables
- Attributes required: None
- For 9118-575: (#7857)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7858) - Power Cables, 4x, 23U
This feature provides redundant power cabling for a 4 EIA drawer
with the bottom of the drawer positioned at the 23U location of the rack.
- Attributes provided: Redundant Drawer Power Cables
- Attributes required: None
- For 9118-575: (#7858)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7859) - Power Cables, 4x, 27U
This feature provides redundant power cabling for a 4 EIA drawer
with the bottom of the drawer positioned at the 27U location of the rack.
- Attributes provided: Redundant Drawer Power Cables
- Attributes required: None
- For 9118-575: (#7859)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7860) - Power Cables, 4x, 31U
This feature provides redundant power cabling for a 4 EIA drawer
with the bottom of the drawer positioned at the 31U location of the rack.
- Attributes provided: Redundant Drawer Power Cables
- Attributes required: None
- For 9118-575: (#7860)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7910) - 2 Link Switch Network Interface (p5-575)
The 2 Link Switch Network Interface (SNI) for the p5-575 provides
the attachment to the pSeries High Performance Switch (HPS).
The 2 Link SNI plugs into the GX bus of the p5-575. Connection to
the HPS is accomplished by using the copper switch cable features.
Within the rack, the location of the 2 Link SNI will alternate
between the left side and the right side of the p5-575 for cable
management. #7910 occupies the space of one PCI-X adapter within
the server, reducing the available PCI-X slots by one.
- Attributes provided: 2 Link SNI to attach to the HPS (7045-SW4)
- Attributes required: Available GX position in the p5-575
- For 9118-575: (#7910)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7920) Ethernet Cables, Node to Hubs, EIA01 through EIA17
This feature provides the ethernet cables for the node to connect to
the rack's ethernet network for communication to the HMC, for nodes in
rack locations EIA01 through EIA17.
- Attributes provided: Node Ethernet Cables to Ethernet Hubs
- Attributes required: p5-575 node in EIA position 01 through 17
- For 9118-575: (#7920)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7921) Ethernet Cables, Node to Hubs, EIA19 through EIA35
This feature provides the ethernet cables for the Node to connect to
the rack's ethernet network for communication to the HMC, for nodes in
rack locations EIA19 through EIA35.
- Attributes provided: Node Ethernet Cables to Ethernet Hubs
- Attributes required: p5-575 node in EIA position 19 through 35
- For 9118-575: (#7921)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7922) - Switch Cable (SNI), 0.5 meter, copper
The Switch Cable, 0.5 meter, copper, is used within the pSeries
High Performance Switch (HPS) network to enable copper connections
between the switch network interface (SNI) features in the nodes
to the switch port connection card within the HPS for nodes
below EIA location 17. It is also used for NSB to ISB
switch connections when the NSBs and ISBs are in the same
multi-switch rack.
- Attributes provided: Switch Cable, 0.5 meter, copper
- Attributes required: None
- For 9118-575: (#7922)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7924) RIO-2(Remote I/O-2)Cbl, 0.6M
This 0.6M Remote I/O cable is utilized to connect between the left and
right sections of an I/O drawer.
- Attributes provided: RIO-2 Connection
- Attributes required: I/O drawer
- For 9118-575: (#7924)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7937) Bolt-Down Kit, Low-Raised Floor
This feature provides rack ruggedizing and bolt down hardware for
securing rack to a concrete floor beneath a 9.25" to 11.75" (235mm to
298mm) raised floor. Installation of this feature will help to secure
and protect the rack and it's contents from damage when exposed to
vibrations and shocks such as those in a seismic event.
- Attributes provided: Rack bolt down kit
- Attributes required: System or expansion rack
- For 9118-575: (#7937)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7938) Bolt-Down Kit, High-Raised Floor
This feature provides rack ruggedizing and bolt down hardware for
securing rack to a concrete floor beneath a 11.75" to 16.0" (298mm to
405mm) raised floor. Installation of this feature will help to secure
and protect the rack and it's contents from damage when exposed to
vibrations and shocks such as those in a seismic event.
- Attributes provided: Rack bolt down kit
- Attributes required: System or expansion rack
- For 9118-575: (#7938)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7939) Bolt-Down Kit, Non-Raised Floor
This feature provides rack ruggedizing and bolt down hardware for
securing rack to a concrete floor. Installation of this feature will
help to secure and protect the rack and it's contents from damage when
exposed to vibrations and shocks such as those in a seismic event.
- Attributes provided: Rack bolt down kit
- Attributes required: System or expansion rack
- For 9118-575: (#7939)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7944) Advanced POWER Virtualization
This feature allows the customer to create partitions that are in
units of less than 1 CPU (sub-CPU LPARs) and allows the same system I/O
to be virtually allocated to these partitions. The processors on the
system can be partitioned into as many as 10 LPARs per processor.
Partition Load Manager is included to provide cross-partition workload
management across the LPARs. An encrypted key is supplied to the
customer and installed on the system, authorizing the partitioning at the
sub-processor level.
(#7945) Slim Line Door Kit, System Rack
(No Longer Available as of May 12, 2005)
This feature provides front and rear doors for use with the system
rack #5793. This slimline door kit provides a minimized footprint for
use where conservation of space is desired.
- Attributes provided: Slimline Door Kit
- Attributes required: System rack #5793
- For 9118-575: (#7945)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7947) Acoustic Door Kit, System Rack
(No Longer Available as of May 12, 2005)
This feature provides front and rear doors for use with the system
rack #5793. This door kit provides acoustic dampening for use where a
quieter environment is desired.
- Attributes provided: Acoustic Door Kit
- Attributes required:
System rack #5793
- For 9118-575: (#7947)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#7960) Compact Handling Option
This feature allows the System or expansion rack to pass through doors
at the customer location which are less than the 2.02M (79.5") normally
required. With this feature the top 8U section of the rack (including
the power subsystem) is removed at the factory and shipped separately for
installation at the customer location. The height of the rack with the
upper section removed is approximately 1.65M (65").
- Attributes provided: Reduced height for shipping.
- Attributes required: None
- For 9118-575: (#7960)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#7964) Shipping Depth Reduction
This feature allows the #5793 System Rack to utilize elevators that
have a 51 inch depth limitation. The rear frame extension components are
removed at the factory and shipped separately for installation at the
customer location.
- Attributes provided: Shipping depth reduction
- Attributes required: None
- For 9118-575: (#7964)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 9118-575: (#8131)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 9118-575: (#8132)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8133) RJ-45 to DB-25 Converter Cable
This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 9118-575: (#8133)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a
modified version of the existing 16-port Remote Async Node (feature #8130
or 8134) in an industry-standard 19-inch rack mount chassis to allow
simpler installation and ease-of-use. Like the existing RAN, it can also
be configured as a desktop device.
As an additional benefit, the metal chassis meets FCC Class B/CISPR B
when used with similarly rated RS/6000 host to meet the needs of
customers with these requirements.
The RANs provide 16 ports of EIA-232 capability with full modem
controls on each port and are connected to the 128-port Async Controller
(Micro Channel or ISA versions) residing in the host. RANs are connected
in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either
version).
The rack-mountable RAN offers these enhanced features:
- Industry-standard 19-inch rack mountable chassis (can be configured
for stacking on a desktop or mounted in a 19-inch rack).
- Meets FCC Class B/CISPR B when used with similarly rated RS/6000
host.
- All RJ-45 connectors are now on the front panel, greatly enhancing
cable management.
- The DB-15 synchronous connectors (cabling from host to RAN and
between RANs) and the power cord and switch are located on the rear
panel.
- Power supply is self contained within the unit.
The rack-mountable RAN offers these same features as the existing RAN
product:
- Identical function and support as existing 16-port Remote Async Node
(RAN), feature #8130 or 8134.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel or ISA host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of 62 meters (200
feet).
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer-supplied cables.
- Location of RAN up to 330 meters from the host using standard
shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN
connection
- Attributes required: 1 RAN-to-128-port Controller connection OR 1
RAN-to-RAN connection
- For 9118-575: (#8136)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 9118-575: (#8137)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8453) - Base Customer Spec Plcmnt
- Requests that IBM deliver the system to the customer according
to the slot in drawer hardware placement defined within the LPAR
Verification Tool (LVT).
- Eliminates the need to have these parts relocated in the
customers environment as would happen if the order is placed
without this feature code.
- Requires account team to submit output of LVT into IBM
manufacturing via a Web site.
- Requires account team to assure that the LVT information
submitted always reflects the actual order placed.
- Attributes provided: I/O component placement
- Attributes required: LVT tool input
- For 9118-575: (#8453)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8677) Line Cord, 8AWG, 14ft, No Plug
This feature provides a 14 ft 8AWG line cord with no plug. It may be
utilized 200-415V circuits at loadings up to 40A.
- Attributes provided: 14 ft Line Cord with No Plug
- Attributes required: None
- For 9118-575: (#8677)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8686) Line Cord, 6AWG, 14ft, IEC309 100A Plug
This feature provides a 14 ft, 6AWG line cord equipped with an IEC309
100A plug. It provides connection to an 80A, 240VAC circuit.
(#8687) Line Cord, 6AWG, 6ft, IEC309 100A Plug
This feature provides a 6 ft, 6AWG line cord equipped with an IEC309
100A plug. It provides connection to an 80A, 240VAC circuit.
- Attributes provided: 6 ft line cord with IEC309 100A plug
- Attributes required: None
- For 9118-575: (#8687)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8688) Line Cord, 6AWG/Type W, 14ft, IEC309 60A Plug
This feature provides a 14 ft, 6AWG/Type W line cord equipped with a
60A IEC309 plug. It provides connection to a 60A, 240VAC circuit.
(#8689) Line Cord, 6AWG/Type W, 6ft, IEC309 60A Plug
This feature provides a 6 ft, 6AWG/Type W line cord equipped with a
60A IEC 309 plug. It may be utilized for 60A, 240VAC circuits.
- Attributes provided: 6 ft Line Cord with 60A IEC309 Plug
- Attributes required: None
- For 9118-575: (#8689)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8694) Line Cord, 6AWG, 14ft, No Plug
This feature provides a 14 ft 6AWG line cord with no plug. It may be
utilized for 200-415V circuits at loadings up to 63A.
- Attributes provided: 14 ft Line Cord with No Plug
- Attributes required: None
- For 9118-575: (#8694)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8697) Line Cord, 8AWG, 14ft, IEC309 30A Plug
This feature provides a 14 ft, 8AWG line cord equipped with an IEC309
30A plug. It provides connection to an 30A, 480VAC circuit.
- Attributes provided: 14 ft line cord with IEC309 30A plug
- Attributes required: None
- For 9118-575: (#8697)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8698) Line Cord, 8AWG, 6ft, IEC309 30A Plug
This feature provides a 6 ft, 8AWG line cord equipped with an IEC309
30A plug. It provides connection to an 30A, 480VAC circuit.
- Attributes provided: 6 ft line cord with IEC309 30A plug
- Attributes required: None
- For 9118-575: (#8698)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P
This feature provides a USB attached US English #103P keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8800)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8801) Quiet Touch Keyboard - USB, Business Black, French, #189
This feature provides a USB attached French #189 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8801)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142
This feature provides a USB attached Italian #142 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8802)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8803) Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129
This feature provides a USB attached German/Austrian #129 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8803)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166
This feature provides a USB attached UK English #166 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8804)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172
This feature provides a USB attached Spanish #172 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8805)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194
This feature provides a USB attached Japanese #194 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8806)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275
This feature provides a USB attached Brazilian Portuguese #275
keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8807)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8808) Quiet Touch Keyboard - USB, Business Black, Canadian French, #058
This feature provides a USB attached Canadian French #058 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8808)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8810) Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch, #120
This feature provides a USB attached Belgian/Dutch #120 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8810)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8811) Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153
This feature provides a USB attached Swedish/Finnish #153 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8811)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8812) Quiet Touch Keyboard - USB, Business Black, Danish, #159
This feature provides a USB attached Danish #159 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8812)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8813) Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
This feature provides a USB attached Bulgarian #442 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8813)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8814) Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G
This feature provides a USB attached Swiss/French/German #150F/G
keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8814)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8816) Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
This feature provides a USB attached Norwegian #155 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8816)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8817) Quiet Touch Keyboard - USB, Business Black, Dutch, #143
- Attributes provided:
- Attributes required:
- For 9118-575: (#8817)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8818) Quiet Touch Keyboard - USB, Business Black, Portuguese, #163
This feature provides a USB attached Portuguese #163 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8818)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8819) Quiet Touch Keyboard - USB, Business Black, Greek, #319
This feature provides a USB attached Greek #319 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8819)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8820) Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
This feature provides a USB attached Hebrew #212 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8820)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8821) Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
This feature provides a USB attached Hungarian #208 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8821)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8823) Quiet Touch Keyboard - USB, Business Black, Polish, #214
This feature provides a USB attached Polish #214 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8823)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
This feature provides a USB attached Slovakian #245 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8825)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243
This feature provides a USB attached Czeck #243 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8826)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8827) Quiet Touch Keyboard - USB, Business Black, Turkish, #179
This feature provides a USB attached Turkish #179 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8827)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
This feature provides a USB attached LA Spanish #171 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8829)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8830) Quiet Touch Keyboard - USB, Business Black, Arabic, #238
This feature provides a USB attached Arabic #238 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8830)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8833) Quiet Touch Keyboard - USB, Business Black, Korean, #413
This feature provides a USB attached Korean #413 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8833)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8834) Quiet Touch Keyboard - USB, Business Black, Chinese/US, #467
This feature provides a USB attached Chinese/US #467 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8834)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445
This feature provides a USB attached French Canadian #445 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8835)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8836) Quiet Touch Keyboard - USB, Business Black, Thai, #191
This feature provides a USB attached Thai #191 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8836)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443
This feature provides a USB attached Russian #443 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8838)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8839) Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105
This feature provides a USB attached Yugoslavian/Latin #105 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8839)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P
This feature provides a USB attached US English #103P (EMEA) keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9118-575: (#8840)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8841) Mouse - Business Black with Keyboard Attachment Cable
This feature provides a three button mouse and a cable for attachment
to a keyboard.
- Attributes provided: 3-Button mouse
- Attributes required: Keyboard with mouse Attachment Port
- For 9118-575: (#8841)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9004) Southern Hemisphere Designator for Monitors
Specifies that southern hemisphere models are required for all CRT
monitors on the initial plant order or on MES orders. Not required with
TFT monitors.
- Attributes provided: None
- Attributes required: Monitor
- For 9118-575: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9671) - Manufacturing Process Indicator:
This feature provides an indicator to the manufacturing process.
- Attributes provided: Manufacturing process indicator
- Attributes required: None
- For 9118-575: (#9671)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: No
- Return parts MES: No
(#9672) - Manufacturing Process Indicator:
This feature provides an indicator to the manufacturing process.
- Attributes provided: Manufacturing process indicator
- Attributes required: None
- For 9118-575: (#9672)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9700) Language Group Specify - Dutch
Dutch language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9700)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 9118-575: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9718) Language Group Specify - Turkish
Turkish language group for nomenclature and publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 9118-575: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 9118-575: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9721) Language Group Specify - Russian
Russian language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for nomenclature and standard
publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9724) Language Group Specify - Czech
Czech language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9725) Language Group Specify -- Romanian
Romanian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9725)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9727) Language Group Specify -- Slovenian
Slovenian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9118-575: (#9727)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
© IBM Corporation 2005.
Back to top
|
|
|
|