Powerful blade-thin computing
The IBM eServer BladeCenter HS20 blade servers are the key components
to building your blade configuration. Optionally available Ethernet and
Fibre Channel switch, redundant keyboard video mouse (KVM) management,
and power modules support advanced configurations.
Performance and scalability
- 3.06 GHz/533 MHz-512 KB L2 cache and 2.80 GHz/533 MHz-512 KB L2 cache
Xeon processors with 533 MHz front-side bus
- 512 MB memory with Chipkill ECC, supporting up to 8 GB maximum(2)
(only with memory DIMMs of 512 MB, or higher)
- Dual Giabit Ethernet connections with teaming and failover support
- Integrated management processor, monitoring critical components on
each blade for remote and local systems management
- ATA-100 IDE controller, economical interface for up to two optional
40 GB(3) IDE HDDs with IDE RAID 1 standard for operating
system-independent mirroring capability
- SCSI expansion connector, supporting optional storage unit containing
an Ultra320 RAID 1 SCSI controller and backplane support for two hot-swap
HDDs
Note: (2) Using 2 GB DIMMs.
Note: (3) When referring to HDD or tape backup capacity, GB stands for
one billion bytes. Total user capacity may vary depending on operating
environments.
Service and support perfected for e-business
- IBM Director and Remote Deployment Manager
- ServerProven compatibility testing and Web support
- Three-year, on-site(4) limited warranty(5)
Note: (4) IBM sends a technician after attempting to diagnose and resolve
the problem remotely.
Note: (5) For information on the IBM Statement of Limited Warranty,
visit:
http://www.ibm.com/servers/support/machine_warranties/
Alternatively, this information is also available by contacting your
IBM representative or reseller. Copies are available upon request.
Related options
IBM Processor Upgrade with 2.8 GHz/533 MHz-512 KB L2 Cache Xeon
Processor (73P9073) contains a 2.8 GHz/512 KB L2 Cache Xeon
processor supporting internal processing speeds of 2.8 GHz at 533 MHz
front-side bus.
IBM Processor Upgrade with 3.06 GHz/533 MHz-512 KB L2 Cache Xeon
Processor (73P9074) contains a 3.06 GHz/512 KB L2 Cache Xeon
processor supporting internal processing speeds of 3.06 GHz at 533 MHz
front-side bus.
These processor options feature a full-speed 512 KB advanced transfer
L2 cache. These next-generation Xeon processors use a 133 MHz common
clock speed for external operations. Both 266 and 533 MHz source
synchronous strobes are used to support 266 MHz (double-pumped) address
and 533 MHz (quad-pumped) data buses to the memory controller. This
allows up to 4.3 GB/s data transfers between memory and the processor.
Memory
512 MB (2 x 256 MB) Non-Chipkill RDIMM Kit (73P2868)
consists of two 256 MB PC2100 CL2.5 ECC DDR SDRAM RDIMMs.
BladeCenter HS20
High-performance blade server subsystems
The BladeCenter HS20 blades are high-throughput, two-way, SMP-capable
Xeon-based network blade servers, highly scalable when you add memory and
a second processor. These flip-chip, pin grid array 2 (FC-PGA2)
processors feature advanced transfer L2 caches integrated onto the
processor core and that run at the same clock speed. The advanced
transfer cache is a result of a "backside bus" 256 bits wide. It
features a quad-wide cache line that can transfer four 64-bit cache line
segments at one time to deliver full-speed capability. The cache is
eight-way set associative.
Two Intel Xeon connectors are standard on the blade board to support
installation of a second processor. High-speed, PC2100 DDR SDRAM is
synchronized for up to 533 MHz processor-to-memory subsystem performance
with current processors.
The BladeCenter HS20 uses the fourth-generation ServerWorks Grand
Champion Low End (GCLE) SystemSet chipset that includes:
- Grand Champion Memory and I/O Controller (CMIC-LE5)
- Champion South Bridge 6 (CSB6-U)
- Champion I/O Bridge (CIOB-ES)
The CMIC-LE5 controls two main functional units:
- High-performance main memory subsystem, maximizing throughput from
processors to memory
- Inter Module Bus, maximizing throughput from the processor bus to the
I/O buses
The CSB6-U delivers PCI function and integrates the following key I/O
functions:
- IDE controller and HDDs
- USB, supporting four USB ports
- Power management logic
- PCI bus interface for video controller
- Systems management bus, supporting Phillips I2C two-wire protocol
interface
- Low power controller interface for POST/BIOS EEPROM
- Dual Gigabit Ethernet connections
- One external PCI-X bus segment for daughter card connector
Standard BladeCenter HS20 configurations
___________________________________________________________________
| Models Processor L2 Cache Memory Ethernet HDD |
| -------- ------------- -------- ---------- ------------ ---- |
| 8832-L1X 2.8 GHz Xeon 512 KB 512 MB ECC Dual Gigabit open |
| 8832-M1X 3.06 GHz Xeon 512 KB 512 MB ECC Dual Gigabit open |
|__________________________________________________________________|
Additional features
- BladeCenter HS20 system board containing four DIMM connectors,
supporting 256 MB, 512 MB, 1 GB, or 2 GB DIMM options.
- Up to 8 GB of system memory is supported.
- Memory is two-way interleaved (must be installed in matched pairs).
- Memory sizes can be mixed.
- Chipkill function is supported on memory DIMMS of 512 MB and above
- Supports optional HS20 SCSI Storage Expansion Unit: 64-bit Ultra320
SCSI PCI controller (LSI53C1020 Ultra320 SCSI controller) supporting
high-speed (320 MB/s), Low-Voltage Differential SCSI (LVDS) RAID 1
internal storage solutions
- Dual-channel EIDE (ATA-100) controller, supporting economical EIDE
data storage up to 80 GB (two 40 GB HDDs) and RAID 1
- Two full-duplex, dual Gigabit Ethernet PCI connections, high-speed
network communications to LAN clients
BladeCenter HS20 blades are designed for high throughput from
processor to memory and bus I/O.
These features, combined with SMP capability and blade-thin density,
make it an excellent choice for space constrained environments used for:
- Web caching
- Collaboration
- Terminal serving
- Dynamic Web serving
- Firewall
- Telecommunications
- Active directory services
- Scientific and technical computing
- Linux clustering
High-availability and serviceability features
- Hot-swap blades enable easy access to each blade server.
- Two hot-swap 1,800-watt redundant power modules; optional BladeCenter
1,800-Watt Power Supply Modules with two additional power modules for
robust configurations.
- Two hot-swap, 325 CFM redundant blowers assemblies and therm monitors
in critical locations.
- Hot-swap module bays for support of optional Ethernet and Fibre
Channel switch modules minimizes point-of-failure for high levels of
reliability and uptime.
- Management module interfaces with each blade server and enables
single systems management control.
- Control panel with status LEDs provides visual indications of system
well-being.
- Light Path Diagnostics and on-board diagnostics provides an LED map
to a failed or failing component, helping reduce downtime, and service
costs.
The BladeCenter HS20 blades deliver reliability and serviceability.
Features include:
- ECC DIMMs, combined with an integrated ECC memory controller, correct
many soft and hard single-bit memory errors, while minimizing disruption
of service to LAN clients.
- Chipkill memory -- correction for up to four bits per DIMM to help
keep your blade server up and running (available on 512 MB, or higher,
DIMMs).
- Memory hardware scrubbing, designed to correct many soft memory
errors automatically without software intervention.
- ECC L2 cache processors help improve data reliability and reduce
downtime.
- CPU failure recovery in SMP configurations:
- Forces failed processor offline
- Automatically reboots server
- Generates alerts
- Continues operations with the working processor
- PFA on SCSI HDD options, memory, and processors alerts the system
administrator of an imminent component failure.
- Dual Gigabit Ethernet connections support:
- Failover, adapter fault tolerance
- PXE 2.0 Boot Agent
- Wake on LAN
- Load balancing or teaming
- An integrated management processor supports diagnostic, reset, POST,
and auto recovery functions and monitors temperature and voltage; alerts
generated when thresholds are exceeded (refer to the
Limitations section for restrictions).
Systems management
IBM Director
BladeCenter HS20 blades include IBM Director. This powerful, highly
integrated systems-management software solution is built on industry
standards and designed for ease of use.
Exploit your existing enterprise or workgroup management environments
and use rich security features to access and manage physically dispersed
IT assets more efficiently over the Internet.
It can help reduce costs through:
- Reduced downtime
- Increased productivity of IT personnel and end users
- Potentially reduced service and support costs
IT administrators can view the hardware configuration of remote
systems in detail and monitor the usage and performance of critical
components such as processors, HDDs, and memory. IBM Director can be
extended with optional add-ons for advanced server management,
deployment, and software distribution. All of these tools smoothly
integrate into IBM Director for consistent look-and-feel and single point
of management while taking advantage of IBM Director's monitoring,
scheduling, alerting, event management, and group management
capabilities.
Optional add-ons
- The IBM Director Server Plus Pack is a collection of five tools with
predictive and autonomic capabilities that help deliver optimal server
performance and high availability. The five tools include capacity
manager, software rejuvenation, active PCI manager, system availability,
and rack manager.
- Application Workload Manager extends IBM Director to enable the
control of how multiple applications use server resources and protects
against unexpected resource contention.
- Remote Deployment Manager is an effective tool for the initial
deployment phase of a system's life cycle with the ability to remotely
send out complete software images for installation in a preboot
environment.
- Software Distribution Premium Edition enables you to create and
distribute software packages to systems on your network, saving travel
and labor costs.
IBM Director also provides integration into leading workgroup and
enterprise systems management environments, via its Upward Integration
Modules. This enables the advanced management capabilities built into
xSeries servers to be accessed from:
- Tivoli Enterprise and Tivoli NetView
- Computer Associates CA Unicenter TNG
- HP OpenView
- Microsoft SMS
- BMC Patrol
- NetlQ
For more information about IBM Director, refer to Software
Announcement 202-246, dated September 24, 2002.
Remote Deployment Manager (RDM) for BladeCenter
BladeCenter can use RDM, which enables the configuration and
deployment of BladeCenter HS20 blades within a single BladeCenter. This
highly flexible and powerful tool enables you to deploy system images
that include the operating system and configuration detail to one or more
blade servers at one time from an IBM Director console on the network.
With RDM you can:
- Add instructions for loading firmware or specific operating systems
- Deploy multiple blade servers in a BladeCenter at one time
- Store various images on the RDM server for target server
installations
- Restore initial or incremental disk image locally with a keystroke
- Drop and drag to deploy images
BladeCenter management module
Use the management module in the BladeCenter to manage the BladeCenter
and obtain vital system information about your installed BladeCenter HS20
servers. The management module communicates with the blade servers
within the BladeCenter via an RS-485 intermanagement network. This
network relays vital information about individual blade servers such as:
- Temperature
- Voltages
- Power supply status
- Memory status
- Fan status
- HDD status
- Error and status log
You receive status and control for all blade servers within the
BladeCenter. You can shut down and restart any blade server from
anywhere on the network to help save time and costs associated with
travel to the actual installation.
These manageability functions are provided through a self-contained
Web page, creating an easy and familiar way for administrators to
monitor, control, and maintain highly available BladeCenter
installations. The BladeCenter chassis ships standard with one
KVM/management module. An optional BladeCenter redundant KVM/management
module provides BladeCenter with even higher levels of resiliency. While
in the chassis, the second module is in passive or standby mode. If the
active or primary module fails, the second module is automatically
enabled with all the configuration settings of the primary module. You
benefit from seamless remote management and connectivity to the
BladeCenter chassis for your most critical applications.
Accessibility by people with disabilities
None.
Back to top
Product Positioning
|
The BladeCenter HS20 offerings are positioned as the highest-density
servers of the IBM eServer line. They represent a new approach to the
deployment of application servers where two-way, SMP-capable Xeon
processing, high-availability design, systems management, and easy setup
features are combined in an extremely dense package.
The BladeCenter HS20 blades can require less space and power resources
because of their high-density design, reduced power requirements, and
single environment systems management. This is an extremely important
consideration for:
- Large enterprises
- Application service providers
- Scientific and technical computing businesses
They are an excellent fit for applications such as:
- Lotus Notes
- Microsoft Exchange
- Linux clusters
Back to top
Models
|
Model Summary Matrix
Models |
Processor |
Cache |
Memory |
Hard Drive |
CD/DVD |
Software Preload |
Language Support |
Misc. |
L1X |
2.8 GHz Xeon |
512 KB |
512 MB |
Open Bay |
- |
See Software Requirements |
Yes |
Dual Gigabit Ethernet |
M1X |
3.06 GHz Xeon |
512 KB |
512 MB |
Open Bay |
- |
See Software Requirements |
Yes |
Dual Gigabit Ethernet |
Customer Setup (CSU)
This product is designated Customer Setup.
Devices Supported
The IBM(R) BladeCenter HS20 (models -L1X, -M1X) are designed to
maintain compatibility with the following IBM products. As a part of the
ServerProven program, xSeries compatibility listings are updated on the
Web. Detailed information relative to IBM and non-IBM vendor devices,
adapters, software and network operating systems supported with xSeries
servers can be accessed via the Web:
- http://www.ibm.com/pc/us/compat
Part
Description Number
---------------------------------- -------
BladeCenter HS20 (model 8832-L1X) 8832L1X
BladeCenter HS20 (model 8832-M1X) 8832M1X
System Memory
512MB Non-Chipkill RDIMM Kit 73P2868
2x256MB PC2100 CL2.5
ECC DDR SDRAM RDIMMs
512 MB PC2100 CL2.5 ECC 33L5038
DDR SDRAM DIMM
1 GB PC2100 CL2.5 ECC 33L5039
DDR SDRAM DIMM
2 GB PC2100 CL2.5 ECC 33L5040
DDR SDRAM DIMM
Microprocessor Upgrades
IBM Processor Upgrade with 13N0650
2.80 GHz/533 MHz/512 KB L2
Cache Xeon Processor
IBM Processor Upgrade with 73P9074
3.06 GHz/533 MHz/512 KB L2
Cache Xeon Processor
Fixed Disks / Diskette Drives / Storage
IBM HS20 40 GB 5400-rpm ATA-100 HDD 48P7063
IBM 36.4 GB 15K-rpm Ultra160 SCSI 06P5768
Hot-Swap HDD(1)
IBM 36.4 GB 10K-rpm Ultra160 SCSI 06P5755
Hot-Swap SL HDD(1)
IBM 73.4 GB 10K-rpm Ultra160 SCSI 06P5756
Hot-Swap SL HDD(1)
IBM 18.2 GB 15K-rpm Ultra160 SCSI 80-pin HDD(1) 06P5767
IBM 18.2 GB 10K-rpm Ultra160 SCSI Hot-Swap HDD(1) 06P5754
IBM 36.4 GB 10K Ultra320 SCSI HDD Hot-Swap 32P0726
IBM 36.4 GB 15K-rpm Ultra320 SCSI Hot-Swap HDD(1) 32P0734
IBM 73.4 GB 10K-rpm Ultra320 SCSI HDD Hot-Swap 32P0727
IBM 146.8 GB 10K-rpm Ultra160 SCSI HDD Hot-Swap 32P0750
IBM 146.8 GB 10K Ultra320 SCSI HDD Hot-Swap 32P0728
IBM 73.4 GB 15K Ultra320 SCSI HDD 32P0735
Hot-Swap HDD
IBM HS20 SCSI Storage Expansion Unit 48P7058
IBM FAStT500 Storage Server(2) 35521RU
IBM FAStT EXP500 Storage Expansion Unit(2) 35601RU
IBM FAStT EXP500 Storage Expansion Unit(2) (EMEA) 35601RX
IBM FAStT EXP200 Storage Expansion Unit(2) 35421RU
IBM FAStT EXP200 Storage Expansion Unit(2) (EMEA) 35421RX
IBM FAStT EXP200 Redundant Raid Controller 19K1121
IBM FAStT EXP200 HA Storage Server(2) 35422RU
IBM FAStT EXP200 HA Storage Server(2) (EMEA) 35422RX
IBM FAStT700 Storage Server 17421RU
IBM FAStT700 Storage Server 17421RU
IBM FAStT700 Mini Hub 19K1269
IBM SAN Data Gateway Router 2108R3L
UltraSCSI LVD Port
Note: (1) Requires installation of the HS20 SCSI Storage Expansion Unit.
Note: (2) Must be attached to a supported FC expansion card and switch
module.
Communications
IBM HS20 Fibre Channel Expansion Card 48P7061
IBM BladeCenter 2-port Fibre Channel 48P7062
Switch Module
IBM BladeCenter 4-port Gb Ethernet 48P7054
Switch Module
Miscellaneous Cables
Netfinity Fibre Channel 1 M Cable 36L9973
LC-LC Fibre Channel Cable - 25M 19K1249
Short Wave SFP Module 19K1271
LC-LC Fibre Channel Cable - 1M 19K1247
LC-LC Fibre Channel Cable - 5M 19K1248
Netfinity Fibre Channel 25M cable 03P9305
LC-SC Fibre Channel Cable Adapter 19K1250
Long Wave SPF Module 19K1272
NetVista USB - Parallel Printer Cable 19K4164
USB to Serial Cable 10K3661
Other Devices
BladeCenter Acoustic Attenuation Module 49P2694
IBM KVM/Redundant Management Module 48P7055
NetBAY42 Enterprise Rack 930842S
NetBAY42 Enterprise Rack Expansion Cabinet 930842E
NetBAY42 Standard Rack Cabinet 9306420
NetBAY42 Standard Expansion Rack Cabinet 9306421
NetBAY25 Standard Rack Cabinet 9306250
NetBay11 Standard Rack Cabinet 9306110
NetBAY Rack Power 37L6866
Distribution Unit
BladeCenter 1400W Power Supply Modules 48P7052
BladeCenter 1800W Power Supply Modules 13N0570
NetBAY Local Console Manager (LCM) 1735L04
NetBAY Remote Console Manager (RCM) 1735R16
250 mm KVM Conversion Option 32P1636
1.5 M KVM Conversion Option 32P1652
IBM Two-Button Mouse 90P0740
IBM 84-key Space Saver Cost Reduced Keyboard 28L3644
IBM Preferred Pro Full-Size 25R6968
Keyboard - 104 Key (Business Black)
Topspin IB Host Channel Adapter Expansion Card
for IBM eServer BladeCenter 26K6457
IB 3 meter 4x Cable for IBM eServer BladeCenter 26R0813
IB 3 meter 12x to (3) 4x Cable for IBM eServer BladeCenter 26R0816
Qlogic(**) iSCSI Expansion Card for IBM eServer BladeCenter 26K6487
Model Conversions
None.
Back to top
Technical Description
|
BladeCenter HS20
The BladeCenter HS20 is a high-density design blade server that is
installed into the BladeCenter. This hot-swap blade server includes the
following features:
- A 3.06 GHz/512 KB model or 2.80 GHz/512 KB model, Intel-based
processors with 533 MHz quad-pumped FSB:
- 512 MB memory, PC2100 DDR SDRAM with Chipkill ECC system support; 8
GB per blade server using 4x2 GB DIMMs
- Dual Broadcom Gigabit Ethernet connections
- Management processor
- SVGA video controller with 8 MB of video memory
- Network card connector - Supports optional HS20 Fibre Channel
Expansion Card and additional Ethernet cards
- IDE controller
- Two IDE HDD connectors - Install one or two optional 40 GB ATA-100
HDDs
- Connector for storage expansion unit - Supports an optional HS20 SCSI
Storage Expansion Unit for Ultra320 SCSI and support for two hot-swap
Ultra160 or Ultra320 HDDs
Note: (1) The processor GHz speed is the internal processor speed.
External processor operations to system memory and to the PCI bus
controller run at up to 533 MHz.
BladeCenter HS20 Model Configurations
Xeon L2 ECC IDE
Model Processor Cache Memory HDD Interface Ethernet
-------- --------- ------ ------ ---- ------------ --------
8832-L1X 2.80 GHz 512 KB 512 MB open Dual ATA-100 Dual Gb
8832-M1X 3.06 GHz 512 KB 512 MB open Dual ATA-100 Dual Gb
By combining a BladeCenter and up to 14 BladeCenter HS20 blades,
extremely high-density configurations can be deployed to address large
enterprise or application service providers needs for powerful, high
density, high availability servers. This new approach allows twice the
processors, memory, and network connections to be made than that of the
current 1 U-high xSeries 335.
BladeCenter HS20
8832-M1X 8832-L1X
------------ ------------
Processor - Xeon Xeon
Int. speed - 3.06 GHz 2.8 GHz
Ext. speed - 533 MHz (QP) 533 MHz (QP)
Number standard - 1 1
Maximum - 2 2
L2 cache (full speed) 512 KB 512 KB
L3 cache 0 MB 0 MB
Memory (PC2100 DDR) 512 MB ECC 512 MB ECC
DIMMs - 2x256 MB 2x256 MB
DIMM sockets - 4 4
Capacity - 8 GB(1) 4 GB(1)
Video - SVGA SVGA
Memory - 8 MB 8 MB
IDE controller - ATA-100 ATA-100
Channels - 2 2
Connector int. - 2 2
Connector ext. - 0 0
HDD - 0 0
Connectors - 2 2
Internal capacity - 80 GB(2) 80 GB(2)
Total HDD bays - 0 0
PCI Slots - 0 0
Management proc. - Standard Standard
Ethernet controller - Dual Gigabit Dual Gigabit
FC card - Optional Optional
Storage expansion - Optional Optional
SCSI interface - Ultra320 Ultra320
HDD support - 2 2
Internal capacity - 293.6 GB(2) 293.6 GB(2)
CD-ROM (IDE) - 0 0
Diskette drive - 0 0
Power supply - 0 0
Note: (1) Total system memory capacity is based on using 2 GB memory
DIMMs
Note: (2) Capacities are based on installation of two 40 GB IDE HDDs or
two 146.8 GB SCSI HDDs. For latest information on supported HDD options,
visit:
http://www.ibm.com/pc/us/compat
Video Subsystem
- ATI RageXL Graphics/Video Accelerator
- Integrated on the blade
- 8 MB SDRAM standard/maximum video memory
Supported BladeCenter HS20 Video Resolutions
______________________________________________________________________
| | Maximum Refresh | CRT | CRT ISO 9241.3 | Flat Panel|
| Resolution | Rate Supported | Support | Compliance | Support |
|____________|_________________|_________|_________________|___________|
|640 x 480 | 85 Hz | Yes | Yes | Yes |
|____________|_________________|_________|_________________|___________|
|800 x 600 | 85 Hz | Yes | Yes | Yes |
|____________|_________________|_________|_________________|___________|
|1024 x 768 | 75 Hz | Yes | Yes | Yes |
|____________|_________________|_________|_________________|___________|
|1280 x 1024 | 40 Hz | No | No | Yes |
|____________|_________________|_________|_________________|___________|
|1600 x 1200 | 28 Hz | No | No | Yes |
|____________|_________________|_________|_________________|___________|
Note: For resolutions supported by different operating systems, refer to
the operating system documentation.
Dimensions - BladeCenter
- 7 U Rack Drawer:
- Width: 444.0 mm (17.5 in)
- Depth: 711.2 mm (28.0 in)
- Height: 304.2 mm (12.0 in)
- Weight: (minimum configuration) 43.2 kg (95.0 lb)
- Weight: (maximum configuration) 106.8 kg (235 lb)
Electrical - BladeCenter
- 200 to 240 (nominal) V ac; 50 Hz or 60 Hz; 12 A (per power module)
- Input kilovolt-amperes (kVA) (approximately):
- Minimum Configuration: 0.40 kVA (two power supplies)
- Maximum Configuration: 4.00 kVA (four power supplies)
- Btu Output: ship configuration - 1365 Btu/hr (400 watts)
- Btu Output: full configuration - 13648 Btu/hr (4000 watts)
- Acoustical noise emissions for a single BladeCenter configured with
14 BladeCenter HS20 servers:
- 7.4 bels (operating)
- 7.4 bels (idling)
- Acoustical noise emissions for a single BladeCenter with a
BladeCenter Acoustic Attenuation Module option installed and configured
with 14 BladeCenter HS20 servers:
- 6.9 bels (operating)
- 6.9 bels (idling)
Electrical-BladeCenter HS20
- 200 to 240 (nominal) V ac; 50 Hz or 60 Hz
Standards
This system supports or complies with the following standards:
- Multiprocessor Specification (MPS) 1.4.
- Hardware-enabled to meet the International Organization for
Standardization (ISO) 9241, Part 3.
Equipment approvals and safety
- FCC - Verified to comply with Part 15 of the FCC Rules, Class A
- Canada ICES-003, issue 3, Class A
- UL 60950 Safety of Information Technology Equipment
- CSA C22.2 No.60950 Safety of Information Technology Equipment60950
- NOM-019 Seguridad de Equipto de Procesamiento de Datos
- Temperature:
- 10.0 to 35.0 degrees C (50 to 95 degrees F) at 0 to 914 m (0 to 3,000
ft)
- 10.0 to 32.0 degrees C (50 to 90 degrees F) at 914 to 2,133 m (3,000
to 7,000 ft)
- Relative humidity: 8% to 80%
- Maximum altitude: 2,133 m (7,000 ft)
- The BladeCenter HS20 blades contain four DIMM sockets. A maximum of
8 GB of system memory is supported by adding a 2 GB PC2100 CL2.5 ECC DDR
SDRAM DIMM in each of the 4 DIMM sockets. All supported system memory is
addressable through direct memory access. The BladeCenter HS20 supports
currently available 256 MB, 512 MB, 1 GB, and 2 GB DIMM options.
Supported DIMMs can coexist in the same server; however, memory DIMMs of
the same capacity must be installed in matched pairs.
- Chipkill function is only active when 512 MB, or higher, DIMMs are
used. Using 256 MB DIMMs mixed with 512 MB, or higher, DIMMs is not
supported for Chipkill memory.
- Microprocessor SMP upgrades must be of the same type and clock speed
on each BladeCenter HS20. Mixing microprocessors of different speeds or
cache size or upgrading the base processor is not supported.
- The second IDE connector supporting an IDE HDD cannot be used when an
HS20 Fibre Channel Expansion Card or other expansion adapter card is
installed due to mechanical reasons.
Refer to the Software Requirements section for operating
system limitations.
For attended installation of an operating system, this server requires
a compatible:
Unattended or remote installation may be performed without requiring
some or all of these components. Review your unattended software
installation program information for specific hardware configuration
requirements.
For service, the server requires a compatible:
When having the unit serviced, plan to have these components attached
to your server either directly or indirectly via a console switch.
Software Compatibility
The following software products have been tested by IBM and software
publishers in the latest available versions, and where appropriate, are
or will soon be certified by the publisher to be compatible with the
BladeCenter HS20.
OPERATING SYSTEMS
Software Publisher Description
------------------ -----------------------------------------------
Microsoft - Windows 2000 Server (requires SP 3)
- Windows 2000 Advanced Server (requires SP 3)
o Microsoft - Windows Server 2003, Standard Edition
- Windows Server 2003, Enterprise Edition
- Windows Server 2003, Web Edition
o Linux - Red Hat Enterprise Linux 2.1 Advanced Server
- SCO Linux 4.0 - (UL1.0 Based)(1)
- SuSE Linux Enterprise Server 8 - (UL 1.0 Based)
- Turbolinux Enterprise Server 8 - (UL 1.0 Based)
Note: (1) IDE RAID will not be supported on this NOS.
APPLICATION SOFTWARE
Software Publisher Description
------------------ ------------------------------------
IBM Director
IBM RDM
IBM Real Time Diagnostics v2.01
Lotus Lotus/Domino Server R6
Lotus Lotus/Domino Mail Server R6.0.1
IBM SMA 3.1 System Migration Assoc. v3.1
LSI IBM FastT Storage 8.30
Norton Norton AntiVirus Latest
For additional information support, certification, and versions
information on network operating systems, access:
http://www.ibm.com/pc/us/compat
Back to top
Publications
|
An installation and user's guide, safety, and warranty publications
are shipped with each BladeCenter HS20 blade.
Back to top
Features -- Specify/Special/Exchange
|
None.
Order
Description Machine Models Number
-------------------- ---------- -------- ------
BladeCenter HS20 8832 L1X 8832L1X
BladeCenter HS20 8832 M1X 8832M1X
Japan:
BladeCenter HS20 8832 L1X 26K4803
BladeCenter HS20 8832 M1X 26K4811
Part
Description Number
------------------------------------------- -------
512MB (2x256MB) PC2100 CL2.5 ECC DDR SDRAM 73P2868
Non-Chipkill RDIMM Kit
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|
|
|