|
These BladeCenter HS20 blades, coupled with a BladeCenter, advance
application serving with performance, density, and scalability. At your
command are powerful, two-way SMP capable Xeon processors, high-speed
memory, Gigabit Ethernet controllers, and advanced high-availability and
systems-management features. Best of all, they provide a new economic
approach to the deployment of large numbers of powerful servers that can
require less space and power resources.
Powerful Blade-Thin Computing
The BladeCenter and BladeCenter HS20 are the key components to build
your blades configuration. Optionally available Ethernet and Fibre
Channel (FC) switch and power modules support advanced configurations.
For information on BladeCenter and related options, refer to Hardware
Announcement 102-257, dated September 24, 2002,
BladeCenter HS20 - Performance and Highly Scalable
- Choice of 2.6 or 2.8 GHz(1) Xeon processors with quad-pumped 400 MHz
front-side bus (FSB) and full-speed 512 KB ECC L2 caches
- Standard 512 MB system memory with Chipkill ECC support - Supports 8
GB maximum(2)
- Dual Broadcom Gigabit Ethernet controllers with teaming and failover
support
- Integrated management processor - Monitors critical components on
each blade for remote and local systems management
- ATA-100 IDE controller - Economical interface for up to two optional
40 GB(3) IDE HDDs
- SCSI expansion connector - Supports optional storage unit containing
an Ultra320 RAID 1 SCSI controller and backplane support for two hot-swap
HDDs
Note: (1) GHz and MHz denote the internal and/or external clock speed of
the microprocessor only, not application performance. Many factors
affect application performance.
Note: (2) When and if 2 GB DIMMs become available.
Note: (3) When referring to hard drive or tape backup capacity, GB stands
for one billion bytes. Total user capacity may vary depending on
operating environments.
Service and Support Perfected for e-business
- Supported with IBM Director 4.1 and Remote Deployment Manager (RDM)
- ServerProven compatibility testing and Web support
- Three-year, on-site(4), limited warranty(5)
Note: (4) With respect to on-site service, IBM sends a technician after
attempting to diagnose and resolve the problem remotely.
Note: (5) For information on the IBM Statement of Limited Warranty,
visit:
http://www.ibm.com/servers/support/machine_warranties/
Alternatively, this information is also available by contacting your
IBM representative or reseller. Copies are available upon request.
Related Options
IBM Processor Upgrade with 2.6 GHz 400 MHz 512 KB L2 Cache Xeon
Processor (73P5982) contains a 2.6 GHz Xeon processor supporting
internal processing speeds of 2.6 GHz.
IBM Processor Upgrade with 2.8 GHz 400 MHz 512 KB L2 Cache Xeon
Processor (73P5983) contains a 2.8 GHz Xeon processor supporting
internal processing speeds of 2.8 GHz.
The above processor options feature a full-speed 512 KB advanced
transfer L2 cache and a quad-pumped FSB. These next-generation Xeon
processors use a 100 MHz common clock speed for external operations.
Both 200 and 400 MHz source synchronous strobes are used to support 200
MHz (double-pumped) address and 400 MHz (quad-pumped) data busses to the
memory controller. This allows up to 3.2 GB/s data transfers between
memory and the processor.
Each option contains a heat sink designed for the BladeCenter HS20
server.
BladeCenter HS20 Description
High-Performance Blade-Server Subsystems
The BladeCenter HS20 blades are high-throughput, two-way, SMP-capable
Xeon-based network blade servers, highly scalable by adding memory and a
second processor. These flip-chip, pin grid array 2 (FC-PGA2) processors
feature advanced transfer L2 caches that are integrated onto the
processor core and run at the same clock speed as the processor core.
The advanced transfer cache is a result of a "backside bus" that is 256
bits wide. It features a quad-wide cache line that can transfer four
64-bit cache line segments at one time to deliver full-speed capability.
The cache is eight-way set associative.
Two Intel Xeon connectors are standard on the blade board to support
installation of a second processor. High-speed, PC2100 DDR SDRAM is
synchronized for up to 400 MHz processor-to-memory subsystem performance
with current processors.
The BladeCenter HS20 uses the fourth-generation ServerWorks Grand
Champion Low End (GCLE) SystemSet chipset that includes:
- Grand Champion Memory and I/O Controller (GMIC-LE)
- Champion South Bridge 5 (CSB5)
- Champion IO Bridge (CIOBX2)
The CMIC-LE controls two main functional units:
- The high-performance main memory subsystem - Maximizes throughput
from processors to memory
- The Inter Module Bus (IMB) - Maximizes throughput from the processor
bus to the I/O busses
The CSB5 provides PCI function and integrates the following key I/O
functions:
- IDE controller and HDDs
- USB - Supports four USB ports
- Power management logic
- Systems management bus (SMBus) - Supports Phillips I2C two-wire
protocol interface
- LPC interface for POST/BIOS EEPROM
The CIOBX2 provide high-performance data flow between the IMB and two
64-bit PCI-X interfaces supporting 1.6 GB/s bandwidths for dual gigabit
Ethernet controllers and optional SCSI expansion.
Standard BladeCenter HS20 Configurations
__________________________________________________________________
| Models Processor L2 Cache Memory Ethernet HDD |
| -------- ------------ -------- ---------- ------------ ---- |
| 8678-51X 2.6 GHz Xeon 512 KB 512 MB ECC Dual Gigabit open |
| 8678-61X 2.8 GHz Xeon 512 KB 512 MB ECC Dual Gigabit open |
|__________________________________________________________________|
Additional Features
- BladeCenter HS20 system board containing four DIMM connectors
supporting currently available 256 MB, 512 MB, or 1 GB DIMM options.
- Up to 8 GB(7) of system memory is supported.
- Memory is two-way interleaved (must be installed in matched pairs).
- Memory sizes can be mixed.
- Chipkill function supported.
- Supports optional HS20 SCSI Storage Expansion Unit - 64-bit, Ultra320
SCSI PCI controller (LSI53C1020 Ultra320 SCSI controller) supporting
high-speed (320 MB/s), Low-Voltage Differential SCSI (LVDS) RAID 1
internal storage solutions
- Dual-channel EIDE (ATA-100) controller - Supports economical EIDE
data storage up to 80 GB (two 40 GB HDDs)
- Two full-duplex, Broadcom 5703 Gigabit Ethernet PCI controllers -
High-speed network communications to LAN clients
BladeCenter HS20 blades are designed for high throughput from
processor, to memory, and bus I/O. These features combined with SMP
capability and blade-thin density, make it an excellent choice for space
constrained environments used for:
- Web caching
- Collaboration
- Terminal serving
- Dynamic Web serving
- Firewall
- Telecommunications
- Active directory services
- Scientific and technical computing
- Linux clustering
Note: (7) Requires 2 GB memory DIMM if and when they become available.
High-Availability and Serviceability Features
The BladeCenter HS20 blades deliver on reliability and serviceability.
Features include:
- ECC DIMMs combined with an integrated ECC memory controller
correcting soft and hard single-bit memory errors, while minimizing
disruption of service to LAN clients
- Chipkill memory - Designed to provide correction for up to four bits
per DIMM to help keep your blade server up and running
- Memory hardware scrubbing, designed to correct soft memory errors
automatically without software intervention
- ECC L2 cache processors - Help improve data reliability and reduce
downtime
- CPU failure recovery in SMP configurations:
- Forces failed processor offline
- Automatically re-boots server
- Generates alerts
- Continues operations with the working processor
- PFA on SCSI HDD options, memory, and processors - Alerts the system
administrator of an imminent component failure
- Dual Broadcom 5703 Gigabit Ethernet controllers support:
- Failover - Adapter Fault Tolerance (AFT)
- PXE 2.0 Boot Agent
- Wake on LAN
- Load balancing, or teaming
- An integrated management processor supports diagnostic, reset, POST,
and auto recovery functions and monitors temperature and voltage - Alerts
generated when thresholds are exceeded (refer to the
Limitations section for restrictions)
Systems Management
IBM Director V4.1
BladeCenter HS20 blades are supported with IBM Director V4.1 included
with each BladeCenter This powerful, highly integrated,
systems-management software solution is built on industry standards and
designed for ease of use. Exploit your existing enterprise or workgroup
management environments and use the Internet to securely access and
manage physically dispersed IT assets more efficiently. It can help
reduce costs through:
- Reduced downtime
- Increased productivity of IT personnel and end users
- Reduced service and support costs
IBM Director lets IT administrators view the hardware configuration of
remote systems in detail and monitor the usage and performance of
critical components such as processors, HDDs, and memory.
IBM Director includes IBM Director Agent, a portfolio of server tools,
that integrates into the IBM Director interface and works with the Remote
Supervisor Adapter or other system management monitoring functions
contained in xSeries servers. Typical functions and monitoring
capabilities can include:
- PFA-enabled critical hardware components
- Temperature
- Voltage
- Fan speed
- Light Path Diagnostics
This gives the IT administrator comprehensive, virtual on-site control
of xSeries servers through the ability to remotely:
- Access the server regardless of its status
- Inventory and display detailed system and component information
- View server bootup during POST
- Browse and delete logs of events and errors
- Reset or power cycle the server
- Monitor and set thresholds on server health including:
- Operating system load
- POST time-out
- Voltage
- Temperature
- Set proactive alerts for critical server events including PFA on:
- Processors
- Memory
- Fans
- Power supplies
- SCSI HDDs
- Define automated actions such as:
- Send an e-mail or page to an administrator
- Execute a command or program
- Pop-up an error message to the IBM Director console
- Flash BIOS
- Monitor and graph the utilization of server resources such as:
- Identify potential performance bottlenecks and react to prevent
downtime
IBM Director Agent provides integration into leading workgroup and
enterprise systems management environments, via Upward Integration
Modules. This enables the advanced management capabilities built into
xSeries servers to be accessed from:
- Tivoli Enterprise and Tivoli Netview
- Computer Associates CA Unicenter TNG
- HP OpenView
- Microsoft SMS
- BMC Patrol
- NetlQ
For more information about Director 4.1, refer to Software
Announcement 202-246, dated September 24, 2002.
Remote Deployment Manager (RDM) for BladeCenter
The BladeCenter enclosure features RDM that enables the configuration
and deployment of BladeCenter HS20 blades within a single BladeCenter.
This highly flexible and powerful tool enables you to deploy system
images to one or more blade servers at one time with various operating
systems and configurations from a console on the network.
RDM operates in the following operating system environments:
- Windows 2000
- Windows 2000 Advanced Server
RDM lets you:
- Customize scripting ability to add additional instructions for
loading firmware or specific operating systems
- Deploy multiple blade servers in an BladeCenter at one time
- Store various images on the RDM server for target server
installations
- Power restore technology - Restore initial or incremental disk image
locally with a keystroke
- Ease-of-use user interface - Drop and drag capability for deploying
images
BladeCenter Management Module
The management module standard in the BladeCenter enables you to
manage the BladeCenter and obtain vital system information of the
installed BladeCenter HS20 servers. The management module communicates
with the blade servers within the BladeCenter via an RS-485
intermanagment network. This network relays vital information about
individual blade servers such as:
- Temperature
- Voltages
- Power supply status
- Memory status
- Fan status
- HDD status
- Error and status log
The management module allows you to receive status and control all
blade servers within the BladeCenter. You can shutdown and restart any
blade server from anywhere on the network to help save time and costs
associated with travel to the actual installation.
These manageability functions are provided through a self-contained
Web page. This creates an easy and familiar way for administrators to
monitor, control, and maintain highly-available BladeCenter
installations.
Accessibility by People with Disabilities
None.
 Back to top
|
Product Positioning
| |
The BladeCenter and BladeCenter HS20 offerings are positioned as the
highest density servers of the xSeries server line. They are a new
approach to the the deployment of application servers where two-way,
SMP-capable Xeon processing, high-availability design, and systems
management and easy setup features are condensed into an extremely dense
package.
The BladeCenter takes just 7 U of rack space. It is capable of
containing up to 14 blade servers and providing the necessary I/O network
switching, power, cooling, and control panel information to support these
individual servers. When compared to most 1 U high servers, the
BladeCenter can support twice the number of processing power in the same
rack space.
In addition to initial cost savings, the BladeCenter and BladeCenter
HS20 blades can require less space and power resources due to their
high-density design, reduced power requirements, and single environment
systems management. This is an extremely important consideration for:
- Large enterprises
- Application service providers
- Scientific and technical computing businesses
They are an excellent fit for applications, such as:
- Citrix
- Lotus Notes
- Microsoft Exchange
- WebSphere
- Linux clusters
These new BladeCenter HS20 offerings enhance the BladeCenter line and
will replace the current 2.0 and 2.4 GHz BladeCenter HS20 blades at a
later date.
Back to top
|
Models
|
Model Summary Matrix
Xeon L2
Model Processor Cache Memory Connection Hard Drive
----- --------- ------ ------ ------------- ----------
51X 2.6 GHz 512 KB 512 MB dual Ethernet Open bay
61X 2.8 GHz 512 KB 512 MB dual Ethernet Open bay
Customer Setup (CSU)
These products are designated Customer Setup.
Devices Supported
The IBM(R) BladeCenter HS20 (models -51X, -61X) are designed to
maintain compatibility with the following IBM products. As a part of the
ServerProven program, xSeries compatibility listings are updated on the
Web. Detailed information relative to IBM and non-IBM vendor devices,
adapters, software and network operating systems supported with xSeries
servers can be accessed via the Web:
- http://www.ibm.com/pc/us/compat
Part
Description Number
---------------------------- -------
BladeCenter (model 8677-1XX) 86771XX
System Memory
256 MB PC2100 CL2.5 ECC 33L5037
DDR SDRAM DIMM
512 MB PC2100 CL2.5 ECC 33L5038
DDR SDRAM DIMM
1 GB PC2100 CL2.5 ECC 33L5039
DDR SDRAM DIMM
Microprocessor Upgrades
IBM Processor Upgrade with 73P5982
2.6 GHz 400 MHz 512 KB L2
Cache Xeon Processor
IBM Processor Upgrade with 73P5983
2.8 GHz 400 MHz 512 KB L2
Cache Xeon Processor
Fixed Disks / Diskette Drives / Storage
IBM HS20 40 GB 5400-rpm ATA-100 HDD 48P7063
IBM 36.4 GB 15K-rpm Ultra160 SCSI 06P5768
Hot-Swap HDD(1)
IBM 36.4 GB 10K-rpm Ultra160 SCSI 06P5755
Hot-Swap SL HDD(1)
IBM 73.4 GB 10K-rpm Ultra160 SCSI 06P5756
Hot-Swap SL HDD(1)
IBM 18.2 GB 15K-rpm Ultra160 SCSI 80-pin HDD(1) 06P5767
IBM 18.2 GB 10K-rpm Ultra160 SCSI Hot-Swap HDD(1) 06P5754
IBM 36.4 GB 15K-rpm Ultra320 SCSI Hot-Swap HDD(1) 06P5776
IBM HS20 SCSI Storage Expansion Unit 48P7058
IBM FAStT500 Storage Server(2) 35521RU
IBM FAStT EXP500 Storage Expansion Unit(2) 35601RU
IBM FAStT EXP500 Storage Expansion Unit(2) (EMEA) 35601RX
IBM FAStT EXP200 Storage Expansion Unit(2) 35421RU
IBM FAStT EXP200 Storage Expansion Unit(2) (EMEA) 35421RX
IBM FAStT EXP200 Redundant Raid Controller 19K1121
IBM FAStT EXP200 HA Storage Server(2) 35422RU
IBM FAStT EXP200 HA Storage Server(2) (EMEA) 35422RX
IBM FAStT700 Storage Server 17421RU
IBM FAStT700 Storage Server 17421RU
IBM FAStT700 Mini Hub 19K1269
IBM SAN Data Gateway Router 2108R3L
UltraSCSI LVD Port
Note: (1) Requires installation of the HS20 SCSI Storage Expansion Unit.
Note: (2) Must be attached to a supported FC expansion card and switch
module.
Communications
IBM HS20 Fibre Channel Expansion Card 48P7061
IBM BladeCenter 2-port Fibre Channel 48P7062
Switch Module
IBM BladeCenter 4-port Gb Ethernet 48P7054
Switch Module
Miscellaneous Cables
Netfinity Fibre Channel 1 M Cable 36L9973
LC-LC Fibre Channel Cable - 25M 19K1249
Short Wave SFP Module 19K1271
LC-LC Fibre Channel Cable - 1M 19K1247
LC-LC Fibre Channel Cable - 5M 19K1248
Netfinity Fibre Channel 25M cable 03P9305
LC-SC Fibre Channel Cable Adapter 19K1250
Long Wave SPF Module 19K1272
NetVista USB - Parallel Printer Cable 19K4164
USB to Serial Cable 10K3661
Monitors
IBM E54 Color Monitor 6331
IBM E74 Color Monitor 6332
IBM G78 Color Monitor 6627
IBM T541 15" Flat Panel TFT Display 9512
1U Flat Panel Display Console Kit w/ US Keyboard 32P1031
1U Flat Panel Display Console Kit w/o Keyboard 32P1032
IBM NetBay 2U Flat Panel Display Console Kit w/o Keyboard 32P1703
IBM NetBay 2U Flat Panel Display Console Kit 32P1702
Other Devices
BladeCenter Acoustic Attenuation Module 49P2694
NetBAY42 Enterprise Rack 930842S
NetBAY42 Enterprise Rack Expansion Cabinet 930842E
NetBAY42 Standard Rack Cabinet 9306420
NetBAY42 Standard Expansion Rack Cabinet 9306421
NetBAY25 Standard Rack Cabinet 9306250
NetBay11 Standard Rack Cabinet 9306110
NetBAY Rack Power 37L6866
Distribution Unit
BladeCenter 1200W Power Supply Modules 48P7052
NetBAY Local Console Manager (LCM) 1735L04
NetBAY Remote Console Manager (RCM) 1735R16
250 mm KVM Conversion Option 32P1636
1.5 M KVM Conversion Option 32P1652
IBM Two-Button Mouse 90P0740
IBM 84-key Space Saver Cost Reduced Keyboard 28L3644
IBM Preferred Pro Full-Size 25R6968
Keyboard - 104 Key (Business Black)
Qlogic(**) iSCSI Expansion Card for IBM eServer BladeCenter 26K6487
Model Conversions
None.
Back to top
|
Technical Description
|
The BladeCenter HS20 is a high-density design blade server that is
installed into the BladeCenter. These hot-swap blade servers include the
following features:
- Choice of Xeon processor-based models each with 512 KB full-speed
caches and 400 MHz quad-pumped FSB:
- 512 MB of PC2100 DDR SDRAM with Chipkill ECC system memory support -
4 GB per blade server using 4 x 1 GB DIMMs)
- Dual Broadcom Gigabit Ethernet controllers
- Management processor
- SVGA video controller with 8 MB of video memory
- Network card connector - Supports optional HS20 Fibre Channel
Expansion Card and additional Ethernet cards
- IDE controller
- Two IDE HDD connectors - Install one or two optional 40 GB ATA-100
HDDs
- Connector for storage expansion unit - Supports an optional HS20 SCSI
Storage Expansion Unit for Ultra320 SCSI and support for two hot-swap
Ultra160 or Ultra320 HDDs
Note: (1) The processor GHz speed is the internal processor speed.
External processor operations to system memory and to the PCI bus
controller run at up to 400 MHz.
BladeCenter HS20 Model Configurations
Xeon L2 ECC IDE
Model Processor Cache Memory HDD Interface Ethernet
-------- --------- ------ ------ ---- ------------ ------------
8678-51X 2.6 GHz 512 KB 512 MB open Dual ATA-100 Dual Gigabit
8678-61X 2.8 GHz 512 KB 512 MB open Dual ATA-100 Dual Gigabit
By combining a BladeCenter and up to 14 BladeCenter HS20 blades,
extremely high-density configurations can be deployed to address large
enterprise or application service providers needs for powerful, high
density, high availability servers. This new approach allows twice the
processors, memory, and network connections to be made than that of the
current 1 U-high xSeries 335.
BladeCenter HS20
8678-51X 8678-61X
------------ ------------
Processor - Xeon Xeon
Int. Speed - 2.6 GHz 2.8 GHz
Ext. Speed - 400 MHz (QP) 400 MHz (QP)
Number Standard - 1 1
Maximum - 2 2
L2 Cache (full speed) 512 KB 512 KB
Memory (PC2100 DDR) 512 MB ECC 512 MB ECC
DIMMs - 2x256 MB 2x256 MB
DIMM Sockets - 4 4
Capacity - 8 GB(1) 8 GB(1)
Video - SVGA SVGA
Memory - 8 MB 8 MB
IDE Controller - ATA-100 ATA-100
Channels - 2 2
Connector Int. - 2 2
Connector Ext. - 0 0
HDD - 0 0
Connectors - 2 2
Internal capacity - 80 GB(2) 80 GB(2)
Total HDD Bays - 0 0
PCI Slots - 0 0
Management Proc. - Standard Standard
Ethernet Controller - Dual Gigabit Dual Gigabit
FC card - Optional Optional
Storage expansion - Optional Optional
SCSI interface - Ultra320 Ultra320
HDD support - 2 2
Internal capacity - 146.8 GB 146.8 GB
CD-ROM (IDE) - 0 0
Diskette Drive - 0 0
Power Supply - 0 0
Note: (1) Total system memory capacity is based on using 2 GB memory
DIMMs when and if they become available.
Note: (2) Capacities are based on installation of two 40 GB IDE HDDs.
For the latest information on supported HDD options, visit:
http://www.ibm.com/pc/us/compat
Video Subsystem
- ATI RageXL Graphics/Video Accelerator
- Integrated on the blade
- 8 MB SDRAM standard/maximum video memory
Supported BladeCenter HS20 Video Resolutions
______________________________________________________________________
| | Maximum Refresh | CRT | CRT ISO 9241.3 | Flat Panel|
| Resolution | Rate Supported | Support | Compliance | Support |
|____________|_________________|_________|_________________|___________|
|640 x 480 | 85 hz | Yes | Yes | Yes |
|____________|_________________|_________|_________________|___________|
|800 x 600 | 85 hz | Yes | Yes | Yes |
|____________|_________________|_________|_________________|___________|
|1024 x 768 | 75 hz | Yes | Yes | Yes |
|____________|_________________|_________|_________________|___________|
|1280 x 1024 | 40 hz | No | No | Yes |
|____________|_________________|_________|_________________|___________|
|1600 x 1200 | 28 hz | No | No | Yes |
|____________|_________________|_________|_________________|___________|
Note: For resolutions supported by different operating systems, refer to
the operating system documentation.
Standards
These systems support or comply with the following standards:
- Multi Processor Specification (MPS) 1.4.
- Hardware-enabled to meet the International Organization for
Standardization (ISO) 9241, Part 3.
Equipment Approvals and Safety
- FCC - Verified to comply with Part 15 of the FCC Rules, Class A
- Canada ICES-003, issue 3, Class A
- UL 1950(1)
- CSA C22.2 No. 950
- NOM-019(1)
Note: (1) This server is certified by the respective UL and NOM agencies.
- Temperature:
- 10.0 to 35.0 degrees C (50 to 95 degrees F) at 0 to 914 m (0 to 3,000
ft)
- 10.0 to 32.0 degrees C (50 to 90 degrees F) at 914 to 2,133 m (3,000
to 7,000 ft)
- Relative humidity: 8% to 80%
- Maximum altitude: 2,133 m (7,000 ft)
- The BladeCenter HS20 blades contain four DIMM sockets. A maximum of
8 GB of system memory is supported by adding a 2 GB PC2100 CL2.5 ECC DDR
SDRAM DIMM(1) in each of the 4 DIMM sockets. All supported system memory
is addressable through direct memory access (DMA). The BladeCenter HS20
supports currently available 256 MB, 512 MB, and 1 GB DIMM options.
Supported DIMMs can co-exist in the same server; however, memory DIMMs of
the same capacity must be installed in matched pairs.
- Microprocessor SMP upgrades must be of the same type and clock speed
on each BladeCenter HS20. Mixing microprocessors of different speeds or
cache size, or upgrading the base processor is not supported.
- The second IDE connector supporting an IDE HDD cannot be used when an
HS20 Fibre Channel Expansion Card is installed due to mechanical reasons.
Note: (1) When and if 2 GB DIMMs become available.
Refer to the Software Requirements section for operating
system limitations.
For attended installation of an operating system, this server requires
a compatible:
Unattended or remote installation may be performed without requiring
some or all of these components. Review your unattended software
installation program information for specific hardware configuration
requirements.
For service, the server requires a compatible:
When having the unit serviced, plan to have these components attached
to your server either directly or indirectly via a console switch.
Software Compatibility
The following software products have been tested by IBM and software
publishers in the latest available versions, and where appropriate, are
or will soon be certified by the publisher to be compatible with the
BladeCenter HS20.
OPERATING SYSTEMS
Software Publisher Description
-------------------- --------------------------------------------
Microsoft Windows 2000 Server (requires SP 3)
Windows 2000 Advanced Server (requires SP 3)
Linux Red Hat 7.3
SuSE 8.0
APPLICATION SOFTWARE
Software Publisher Description
------------------ ----------------------------------------------
IBM Director 4.1
IBM Real Time Diagnostics v1.10
Lotus Application Server R5.09
Lotus Mail Server R5.09
IBM Tivoli TME 10 Inventory (5698INV)
IBM Tivoli TME 10 Distributed Monitoring (5698EMN)
IBM Tivoli TME 10 Remote Console (5698RCL)
IBM Tivoli TME 10 Enterprise Console (5698EAS)
IBM Tivoli TME 10 Framework (5698FRA)
IBM Tivoli TME 10 User Administration (5698UAD)
IBM Tivoli TME 10 Software Distribution (5698SWD)
IBM Tivoli TME 10 Security Management (5698SEC)
Intel LANDesk Manager 6.0
Intel LANDesk Management Suite V6.4
Note: Additional support, certification, and version information on
network operating systems can be accessed at:
http://www.ibm.com/pc/us/compat
Back to top
|
Publications
| |
An installation guide, safety, and warranty publication is shipped
with each BladeCenter HS20 blade.
Back to top
|
Features -- Specify/Special/Exchange
|
None.
Order
Description Machine Models Number
---------------- ------- ------ -------
BladeCenter HS20 8678 51X 867851X
8678 61X 867861X
Part
Description Number
------------------------------ -------
IBM Processor Upgrade with 73P5982
2.6 GHz 400 MHz 512 KB Cache
Xeon Processor
IBM Processor Upgrade with 73P5983
2.8 GHz 400 MHz 512 KB Cache
Xeon Processor
Not available.
Back to top
|
Accessories
| |
None.
Customer Replacement Parts
None.
Back to top
|
Machine Elements
| |
None.
Back to top
|
Supplies
| |
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|
|
|
Physical Specifications