BladeCenter and BladeCenter HS20 blade servers continue to revolutionize the economics of application server deployment with Capacity On Demand (COD) availability, while fulfilling the promise to deliver power, scalability, control, and serviceability. BladeCenter standby capacity on demand comes with a BladeCenter chassis and seven standard blades and seven standby capacity blades. A contract is required and seven standby capacity activation part numbers must be purchased within six months.

These BladeCenter HS20 Blade Servers

• Two 2.8 GHz/533 MHz(1) Intel** Xeon** processors
• Two-way SMP processing with 533 MHz front side bus(FSB)
• High-speed 4 GB double data rate (DDR) ECC SDRAM memory standard
• Dual Gb Ethernet switches with failover support
• Fibre channel daughter card
• Integrated systems-management processor
• Integrated IDE controller and one 40 GB IDE HDDs,

Note: (1) GHz and MHz denote the internal and/or external clock speed of the microprocessor only, not application performance. Many factors affect application performance.
Back to top
 

Description

BladeCenter HS20 - Performance and High Availability Service and Support Perfected for e-business IBM Director V4.x ServerProven compatibility testing and Web support Three-year, on-site(3), limited warranty(4) Note: IBM sends a technician after attempting to diagnose and resolve the problem remotely. Note: (3) For information on the IBM Statement of Limited Warranty, visit: http://www.ibm.com/servers/support/machine_warranties/ Alternatively, this information is also available by contacting your IBM representative or reseller. Copies are available upon request. Note: (4) Actual playback speed will vary and is often less than the maximum possible. Related Options BladeCenter Bundle Description The BladeCenter Standby Capacity On Demand offering is comprised of a BladeCenter enclosure (8677-CXX) which is a richly configured chassis with redundant GB ethernet and Fibre channel switches, redundant management modules and power. There are 7 standard HS20 Blades (8832-C1X) each configured with dual 2.8GHz/533FSB processors, 4GB of memory, 1 40GB IDE HDD and a fibre channel daughter card. In addition, there are 7 "standby capacity" HS20 Blades (8832-C2X) with the same configuration as the standard blades. Activation of the standby blades is through the management console, available to the customer immediately. (Terms and conditions of activation specified in a contract agreed to at the time of purchase.) High-Performance Blade-Server Subsystems The BladeCenter HS20 blades are high-throughput, two-way, SMP-capable Xeon-based network blade servers. These flip-chip, pin grid array 2 (FC-PGA2) processors feature advanced transfer L2 caches that are integrated onto the processor core and run at the same clock speed as the processor core. The advanced transfer cache is a result of a "backside bus" that is 256 bits wide. It features a quad-wide cache line that can transfer four 64-bit cache line segments at one time to deliver full-speed capability. The cache is eight-way set associative. Two Intel Xeon processors are standard on the blade board. High-speed, PC2100 DDR SDRAM is synchronized for up to 533 MHz processor-to-memory subsystem performance with current processors. The BladeCenter HS20 uses the fourth-generation ServerWorks Grand Champion Low End (GCLE) SystemSet chipset that includes: Grand Champion Memory and I/O Controller (CMIC-LE5) Champion South Bridge 6 (CSB6-U) Champion I/O Bridge (CIOB-ES) The CMIC-LE5 controls two main functional units: High-performance main memory subsystem, maximizing throughput from processors to memory Inter Module Bus (IMB), maximizing throughput from the processor bus to the I/O busses The CSB6-U delivers PCI function and integrates the following key I/O functions: IDE controller and HDDs USB, supporting four USB ports Power management logic PCI bus interface for video controller Systems management bus (SMBus), supporting Phillips I2C two-wire protocol interface Low-power controller (LPC) interface for POST/BIOS EEPROM The CIOB-ES provides high-performance data flow between the IMB and two 64-bit PCI-X interfaces, supporting 1.6 GB/s bandwidths for dual Gb Ethernet switches and one external PCIX bus segment for daughter card connector. Standard BladeCenter HS20 Configurations Models Processors L2 Cache Memory Ethernet/Fiber Channel Hard Disk Drive 8832C1X 2x 2.8 GHz Xeon 512 KB 4 GB ECC Dual Gb FC Card 40 GB IDE 8832C2X 2x 2.8 GHz Xeon 512 KB 4 GB ECC Dual Gb FC Card 40 GB IDE Standard BladeCenter Configurations Model CD-ROM Power Supply KVM Ethernet/Fiber Channel 8677CXX 1 Dual 1400W 2 2-Ethernet/2-Fiber Switch BladeCenter HS20 blades are designed for high throughput from processor, to memory, and bus I/O. These features, combined with SMP capability and blade-thin density, make it an excellent choice for space constrained environments used for: Web caching Collaboration Terminal serving Dynamic Web serving Firewall Telecommunications Active directory services Scientific and technical computing Linux clustering High-Availability and Serviceability Features The BladeCenter HS20 blades deliver on reliability and serviceability. Features include: ECC DIMMs, combined with an integrated ECC memory controller, correct soft and hard single-bit memory errors, while minimizing disruption of service to LAN clients Chipkill memory - Designed to provide correction for up to four bits per DIMM to help keep your blade server up and running Memory hardware scrubbing, designed to correct soft memory errors automatically without software intervention ECC L2 cache processors help improve data reliability and reduce downtime CPU failure recovery in SMP configurations: Forces failed processor offline Automatically reboots server Generates alerts Continues operations with the working processor PFA on SCSI HDD options, memory, and processors alerts the system administrator of an imminent component failure Dual Gb Ethernet switches support: Failover, adapter fault tolerance PXE 2.0 Boot Agent Wake on LAN Load balancing or teaming Fibre channel daughter card for optical networking An integrated management processor supports diagnostic, reset, POST, and auto recovery functions and monitors temperature and voltage; alerts generated when thresholds are exceeded (refer to the Limitations section for restrictions) Systems Management IBM Director V4.x BladeCenter HS20 blades feature IBM Director V4.x included with each BladeCenter This powerful, highly integrated systems-management software solution is built on industry standards and designed for ease of use. Exploit your existing enterprise or workgroup management environments and use rich security features to access and manage physically dispersed IT assets more efficiently over the internet. It can help reduce costs through: Reduced downtime Increased productivity of IT personnel and end users Reduced service and support costs IT administrators can view the hardware configuration of remote systems in detail and monitor the usage and performance of critical components such as processors, HDDs, and memory. IBM Director can be extended with optional add-ons for advanced server management, deployment, and software distribution. All of these tools smoothly integrate into IBM Director for consistent look-and-feel and single point of management while taking advantage of IBM Directors monitoring, scheduling, alerting, event management and group management capabilities. The IBM Director Server Plus Pack is a collection of five tools with predictive and autonomic capabilities that help deliver optimal server performance and high availability. The five tools include Capacity Manager, Software Rejuvenation, Active PCI Manager, System Availability and Rack Manager. Application Workload Manager extends IBM Director to enable the control of how multiple applications use server resources and protects against unexpected resource contention. Software Distribution Premium Edition enables you to create and distribute software packages to systems on your network, saving travel and labor costs. IBM Director also provides integration into leading workgroup and enterprise systems management environments, via its Upward Integration Modules. This enables the advanced management capabilities built into xSeries servers to be accessed from: Tivoli Enterprise and Tivoli Netview Computer Associates CA Unicenter TNG HP OpenView Microsoft SMS BMC Patrol NetlQ BladeCenter Management Module Use the management module in the BladeCenter to manage the BladeCenter and obtain vital system information about your installed BladeCenter HS20 servers. The management module communicates with the blade servers within the BladeCenter via an RS-485 intermanagement network. This network relays vital information about individual blade servers such as: Temperature Voltages Power supply status Memory status Fan status HDD status Error and status log You receive status and control all blade servers within the BladeCenter. You can shut down and restart any blade server from anywhere on the network to help save time and costs associated with travel to the actual installation. These manageability functions are provided through a self-contained Web page, creating an easy and familiar way for administrators to monitor, control, and maintain highly available BladeCenter installations. The BladeCenter chassis ships standard with two KVM/Management module. An optional IBM BladeCenter Redundant KVM/Management module provides BladeCenter with even higher levels of resiliency. While in the chassis, the second module is in passive or "stand by" mode. If the active or "primary" module faults, the second module is automatically enabled with all the configuration settings of the primary module. Providing the customer with seamless remote management and connectivity to the BladeCenter chassis for their most critical applications. Back to top   Product Positioning High performance, high resiliency system for "on demand" blade server capacity upgrades and enterprise workloads Midmarket or large enterprise who have forecasted growth of 7-14 2-way blade servers over six months Capacity upgrade on demand - capacity is available instantly BladeCenter advantages: Integration, ease of management and deployment, more density, less complexity The BladeCenter and BladeCenter HS20 offers the option of Capacity On Demand (COD) which allows 7 standard blades and 7 standby blades for increased capacity as required by the customer. The BladeCenter and BladeCenter HS20 blades can require less space and power resources because of their high-density design, reduced power requirements, and single environment systems management. This is an extremely important consideration for: Large enterprises Large Mid-market They are an excellent fit for applications such as: Lotus Notes Microsoft Exchange Multi-tier Workloads Citrix Web Serving Parallel Database Back to top   Models Model Summary Matrix Bundles Processors Memory Connection Optical Networking Hard Drive Type WBC11US 2x 2.8 GHz/512KB Xeon 4GB dual Ethernet fiber daughter card 40 GB blade servers Customer Setup (CSU) This product is designated Customer Setup. Devices Supported The IBM(R) BladeCenter and BladeCenter HS20 Capacity On Demand (models -WBC, MBC, NBC) is designed to maintain compatibility with the following IBM products. As a part of the ServerProven program, xSeries compatibility listings are updated on the Web. Detailed information relative to IBM and non-IBM vendor devices, adapters, software and network operating systems supported with xSeries servers can be accessed via the Web: http://www.ibm.com/pc/us/compat Part Description Number ---------------------------- -------- BladeCenter (model 8677-CXX) 8677CXX Blades HS20 (model 8832-C1X) 8832-C1X Blades HS20 (model 8832-C2X) 8832-C2X System Memory 512 MB PC2100 CL2.5 ECC 33L5038 DDR SDRAM DIMM 1 GB PC2100 CL2.5 ECC 38L4031 DDR SDRAM DIMM Microprocessor Upgrades Fixed Disks / Diskette Drives / Storage IBM HS20 40 GB 5400-rpm ATA-100 HDD 48P7099 IBM 36.4 GB 15K-rpm Ultra160 SCSI 06P5768 Hot-Swap HDD(1) IBM 36.4 GB 10K-rpm Ultra160 SCSI 06P5755 Hot-Swap SL HDD(1) IBM 73.4 GB 10K-rpm Ultra160 SCSI 06P5756 Hot-Swap SL HDD(1) IBM 18.2 GB 15K-rpm Ultra160 SCSI 80-pin HDD(1) 06P5767 IBM 18.2 GB 10K-rpm Ultra160 SCSI Hot-Swap HDD(1) 06P5754 IBM 36.4 GB 10K Ultra320 SCSI HDD Hot-Swap 32P0726 IBM 36.4 GB 15K-rpm Ultra320 SCSI Hot-Swap HDD(1) 32P0734 IBM 73.4 GB 10K-rpm Ultra320 SCSI HDD Hot-Swap 32P0727 IBM 146.8 GB 10K-rpm Ultra160 SCSI HDD Hot-Swap 32P0750 IBM 146.8 GB 10K Ultra320 SCSI HDD Hot-Swap 32P0728 IBM 73.4 GB 15K Ultra320 SCSI HDD 32P0735 Hot-Swap HDD IBM HS20 SCSI Storage Expansion Unit 48P7058 IBM FAStT500 Storage Server(2) 35521RU IBM FAStT EXP500 Storage Expansion Unit(2) 35601RU IBM FAStT EXP500 Storage Expansion Unit(2) (EMEA) 35601RX IBM FAStT EXP200 Storage Expansion Unit(2) 35421RU IBM FAStT EXP200 Storage Expansion Unit(2) (EMEA) 35421RX IBM FAStT EXP200 Redundant Raid Controller 19K1121 IBM FAStT EXP200 HA Storage Server(2) 35422RU IBM FAStT EXP200 HA Storage Server(2) (EMEA) 35422RX IBM FAStT700 Storage Server 17421RU IBM FAStT700 Storage Server 17421RU IBM FAStT700 Mini Hub 19K1269 IBM SAN Data Gateway Router 2108R3L UltraSCSI LVD Port   Note: (1) Requires installation of the HS20 SCSI Storage Expansion Unit. Note: (2) Must be attached to a supported FC expansion card and switch module. Communications IBM HS20 Fibre Channel Expansion Card 48P7061 IBM BladeCenter 2-port Fibre Channel 59P6627 Switch Module IBM BladeCenter 4-port Gb Ethernet 48P7082 Switch Module Miscellaneous Cables Netfinity Fibre Channel 1 M Cable 36L9973 LC-LC Fibre Chennel Cable - 25M 19K1249 Short Wave SFP Module 19K1271 LC-LC Fibre Channel Cable - 1M 19K1247 LC-LC Fibre Channel Cable - 5M 19K1248 Netfinity Fibre Channel 25M cable 03P9305 LC-SC Fibre Channel Cable Adapter 19K1250 Long Wave SPF Module 19K1272 NetVista USB - Parallel Printer Cable 19K4164 USB to Serial Cable 10K3661 Other Devices BladeCenter Acoustic Attenuation Module 49P2694 IBM KVM/Redundant Management Module 48P7055 NetBAY42 Enterprise Rack 930842S NetBAY42 Enterprise Rack Expansion Cabinet 930842E NetBAY42 Standard Rack Cabinet 9306420 NetBAY42 Standard Expansion Rack Cabinet 9306421 NetBAY25 Standard Rack Cabinet 9306250 NetBay11 Standard Rack Cabinet 9306110 NetBAY Rack Power 37L6866 Distribution Unit BladeCenter 1200W Power Supply Modules 48P7052 NetBAY Local Console Manager (LCM) 1735L04 NetBAY Remote Console Manager (RCM) 1735R16 250 mm KVM Conversion Option 32P1636 1.5 M KVM Conversion Option 32P1652 IBM Two-Button Mouse 90P0740 IBM 84-key Space Saver Cost Reduced Keyboard 28L3644 IBM Preferred Pro Full-Size 25R6968 Keyboard - 104 Key (Business Black) Cisco Systems Intelligent Gigabit Ethernet 13N2281 Switch Module for IBM eServer BladeCenter Cisco Systems Fiber Intelligent 26K6547 Gigabit Ethernet Switch Module for IBM eServer BladeCenter IBM eServer BladeCenter T Filter 25K8376 Brocade(**) Entry Switch Module for 26K5601 IBM eServer BladeCenter(**) Brocade Performance Bundle for IBM eServer BladeCenter 26K5605 Brocade ISL Trunking for IBM eServer BladeCenter 26K5607 Brocade Advanced Performance Monitoring for 26K5612 IBM eServer BladeCenter Brocade Extended Fabrics for IBM eServer BladeCenter 26K5613 Brocade Fabric Manager v4.x for IBM eServer BladeCenter 26K5615 Brocade Remote Switch for IBM eServer BladeCenter 26K5616 Brocade Advanced Security (Secure OS) for 26K5617 IBM eServer BladeCenter BladeCenter Brocade Entry Switch Full SAN Upgrade for 26K5618 IBM eServer BladeCenter Brocade Enterprise Switch Module for 90P0165 IBM eServer BladeCenter Intel Gigabit Ethernet Expansion Card for 90P3777 IBM eServer BladeCenter IBM eServer BladeCenter Fibre Channel Expansion Card 13N2203 IBM eServer BladeCenter Copper Passthru Module 73P6100 IBM eServer BladeCenter Copper Passthru Module 73P6101 Cable IBM eServer BladeCenter HS20 Low Profile Handle 25K8358 IBM eServer BladeCenter HS40 Low Profile Handle 25K8359 Topspin IB Switch Module for IBM eServer BladeCenter 26K6454 IB 3 meter 4x Cable for IBM eServer BladeCenter 26R0813 IB 3 meter 12x to (3) 4x Cable for IBM eServer BladeCenter 26R0816 Nortel Networks L2/3 Copper GbE Switch 26K6530 Module for IBM eServer BladeCenter Nortel Networks L2/3 Fiber GbE Switch 26K6531 Module for IBM eServer BladeCenter   Qlogic(**) iSCSI Expansion Card for IBM eServer BladeCenter 26K6487   Model Conversions None. Back to top   Technical Description Physical Specifications Operating Environment Limitations Hardware Requirements Software Requirements The BladeCenter and BladeCenter HS20 servers are high-density blade servers that are designed to function when required for Capacity On Demand. The COD is configured so that 7 standard blades are active and 7 are on standby for activation as required by the customer. The BladeCenter HS20 is a high-density design blade server that is installed into the BladeCenter. This hot-swap blade server includes the following features: Two 2.8 GHz Xeon processors with 512 KB full-speed cache and 533 MHz quad-pumped FSB: 4 GB of PC2100 DDR SDRAM with Chipkill ECC system memory Dual Gb Ethernet switch connections Management processor SVGA video controller with 8 MB of video memory Network card connector and HS20 Fibre Channel Expansion Card IDE controller Two IDE HDD connectors - one 40 GB ATA-100 HDD standard BladeCenter HS20 Model Configurations Xeon L2 ECC IDE Model Processor Cache Memory HDD Interface Ethernet/FC ------- ---------- ------ ------ ----- ------------ ----------- 8832C1X 2x 2.8 GHz 512 KB 4 GB 40 GB Dual ATA-100 Dual Gb/FC 8832C2X 2x 2.8 GHz 512 KB 4 GB 40 GB Dual ATA-100 Dual Gb/FC   Standard BladeCenter Configurations Model CD ROM Power Supply KVM Ethernet/Fiber Channel ------- ------ ------------ --- -------------------------- 8677CXX 1 Dual 1400W 2 2- Ethernet/2-Fiber Switch By combining a BladeCenter and up to 14 BladeCenter HS20 blades, extremely high-density configurations can be deployed to address large enterprise or application service providers needs for powerful, high density, high availability servers. This new approach allows the customer to activate blades as needed. Physical Specifications BladeCenter and BladeCenter HS20 The Capacity On Demand Bundles listed will contain the following components in their configurations: 1 x 8677-CXX, 7 x 8832-C1X, and 7 x 8832-C2X. Bundle Part Numbers: WBC11US WBC11xx MBC11xx NBC11xx 8832C1X 8832C2X ------------ ------------ Processor - Xeon Xeon Int. speed - 2.8 GHz 2.8 GHz Ext. speed - 533 MHz (QP) 533 Mhz (QP) Number standard - 2 2 Maximum - 2 2 L2 cache (full speed) 512 KB 512 KB Memory (PC2100 DDR) 4 GB ECC 4 GB ECC DIMMs - 4x1GB 4x1GB DIMM sockets - 4 4 Capacity - 4 GB 4 GB Video - SVGA SVGA Memory - 8 MB 8 MB IDE controller - ATA-100 ATA-100 Channels - 2 2 Connector int. - 2 2 Connector ext. - 0 0 HDD - 1 1 Connectors - 2 2 Internal capacity - 40 GB 40 GB Total HDD bays - 1 1 PCI Slots - 0 0 Management proc. - Standard Standard Ethernet controller - Dual Gb Dual Gb Fiber channel card - 1 1 Storage expansion - None None CD-ROM (IDE) - 0 0 Diskette drive - 0 0 Power supply - 0 0   8677CXX ------------------------- Blade bays (type) - High availability ePlanes Blades standard - 14 (7 Active, 7 Standby) Blades maximum - 14 Video - None PCI slots - 0 Switch modules bays - 4 Ethernet switches - 2 Fiber channel switch - 2 Management modules - 2 CD-ROM (IDE) - 1 (24x-10x) Diskette drive - 1 (1.44 MB) Power supply modules - 2 (4x1400W) Hot-swap - Yes Redundant power - Yes Auto restart - Yes Cooling - 2 blowers Redundant - Yes Hot-swap - Yes   http://www.ibm.com/pc/us/compat Video Subsystem ATI RageXL Graphics/Video Accelerator Integrated on the blade 8 MB SDRAM standard/maximum video memory Supported BladeCenter HS20 Video Resolutions ______________________________________________________________________ | | Maximum Refresh | CRT | CRT ISO 9241.3 | Flat Panel| | Resolution | Rate Supported | Support | Compliance | Support | |____________|_________________|_________|_________________|___________| |640 x 480 | 85 Hz | Yes | Yes | Yes | |____________|_________________|_________|_________________|___________| |800 x 600 | 85 Hz | Yes | Yes | Yes | |____________|_________________|_________|_________________|___________| |1024 x 768 | 75 Hz | Yes | Yes | Yes | |____________|_________________|_________|_________________|___________| |1280 x 1024 | 40 Hz | No | No | Yes | |____________|_________________|_________|_________________|___________| |1600 x 1200 | 28 Hz | No | No | Yes | |____________|_________________|_________|_________________|___________|   Note: For resolutions supported by different operating systems, refer to the operating system documentation. Electrical 200-240 (nominal) V ac; 50 Hz or 60 Hz; Standards This system supports or complies with the following standards: Multi Processor Specification (MPS) 1.4. Hardware-enabled to meet the International Organization for Standardization (ISO) 9241, Part 3. Equipment Approvals and Safety FCC - Verified to comply with Part 15 of the FCC Rules, Class A Canada ICES-003, issue 3, Class A UL 1950(1) CSA C22.2 No. 950 NOM-019(1) Note: (1) This server is certified by the respective UL and NOM agencies. Operating Environment Temperature: 10.0 to 35.0 degrees C (50 to 95 degrees F) at 0 to 914 m (0 to 3,000 ft) 10.0 to 32.0 degrees C (50 to 90 degrees F) at 914 to 2,133 m (3,000 to 7,000 ft) Relative humidity: 8% to 80% Maximum altitude: 2,133 m (7,000 ft) Limitations The BladeCenter HS20 blades contain four DIMM sockets. A maximum of 4 GB of system memory is supported with a 1 GB PC2100 CL2.5 ECC DDR SDRAM DIMM in each of the 4 DIMM sockets. The BladeCenter HS20 supports currently available 512 MB, and 1 GB DIMM options. Microprocessors must be of the same type and clock speed on each BladeCenter HS20. Mixing microprocessors of different speeds or cache size is not supported. Refer to the Software Requirements section for operating system limitations. Hardware Requirements For attended installation of an operating system, this server requires a compatible: Keyboard Mouse Display Unattended or remote installation may be performed without requiring some or all of these components. Review your unattended software installation program information for specific hardware configuration requirements. For service, the server requires a compatible: Keyboard Mouse Display When having the unit serviced, plan to have these components attached to your server either directly or indirectly via a console switch. Software Requirements Software Compatibility The following software products have been tested by IBM and software publishers in the latest available versions, and where appropriate, are or will soon be certified by the publisher to be compatible with the BladeCenter HS20. OPERATING SYSTEMS Software Publisher Description ------------------ ----------------------------------------------- o Microsoft - Windows 2000 Server (requires SP 3) - Windows 2000 Advanced Server (requires SP 3) o Microsoft - Windows Server 2003, Standard Edition - Windows Server 2003, Enterprise Edition - Windows Server 2003, Web Edition o Linux - Red Hat Enterprise Linux 2.1 Advanced Server - SCO Linux 4.0 - (UL1.0 Based) - SuSE Linux Enterprise Server 8 - (UL 1.0 Based) - Turbolinux Enterprise Server 8 - (UL 1.0 Based) APPLICATION SOFTWARE Software Publisher Description ------------------ ------------------------------------------- IBM Director V4.1 IBM RDM V4.11 (Does not support any Linux NOSs) IBM Real Time Diagnostics v2.01 Lotus Lotus/Domino Server R6 Lotus Lotus/Domino Mail Server R6.0.1 IBM SMA 3.1 System Migration Assoc. v3.1 LSI IBM FastT Storage 8.30 Norton Norton AntiVirus Latest   For additional information support, certification, and versions information on network operating systems, access: http://www.ibm.com/pc/us/compat Back to top   Publications An installation and user's guide, safety, and warranty publications and BladeCenter Standby Capacity On Demand Supplemental Information pub are shipped with each bundled BladeCenter system. Back to top   Features -- Specify/Special/Exchange No Charge Specify Codes Special Feature Codes -- Chargeable Feature Exchanges No Charge Specify Codes None. Special Feature Codes -- Chargeable Order Description Machine Models Number -------------------- ---------- -------- ------ BladeCenter Standby Capacity On Demand - US (1-8677-CXX WBC11US Enclosure + 7-Standard 8832-C1X + 7-Standby 8832-C2x Blades) Standby Capacity 8484 C2X 8484C2X Activation for 8832-C2X Note: Non-ordering. The following systems are only available through Capacity On Demand Bundle Order. BladeCenter HS20 8832 C1X 8832C1X 8832 C2X 8832C2X BladeCenter Enclosure 8677 CXX 8677CXX   Feature Exchanges Not available. Back to top   Accessories None. Customer Replacement Parts None. Back to top   Machine Elements None. Back to top   Supplies None. Diskettes None. Trademarks (R), (TM), * Trademark or registered trademark of International Business Machines Corporation. ** Company, product, or service name may be a trademark or service mark of others. Windows is a trademark of Microsoft Corporation.  © IBM Corporation 2005. Back to top