Model Summary Matrix
Model |
Processor |
Speed |
Memory |
Hard Drive |
Slot Maximum |
Optical Storage Device |
C03 |
Intel Pentium 4 |
3.0 GHz |
1 GB |
40 GB |
3 |
DVD-RAM |
Customer Setup (CSU)
No.
Devices Supported
Feature Availability Matrix
The following feature availability matrix for MT 7315 uses the letter
"A" to indicate features that are available and orderable on the
specified models. "S" indicates a feature that is supported on the new
model during a model conversion; these features will work on the new
model, but additional quantities of these features cannot be ordered on
the new model; they can only be removed. "N" indicates that the feature
is not supported on the new model and must be removed during the model
conversion. As additional features are announced, supported, or
withdrawn, this list will be updated. Please check with your Marketing
Representative for additional information.
|C| A = AVAILABLE S = SUPPORTED
|0| N = NOT SUPPORTED, MUST BE REMOVED
|3|
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
0960 |A| Hardware Management Console for POWER4 Licensed
| | Machine Code
0961 |A| Hardware Management Console for POWER5 Licensed
| | Machine Code
0966 |A| pSeries Indicator
0986 |A| CCS Customer Service Specify (US)
1204 |A| Order Routing Indicator - Product will be used with a 24"
| | Rack Mounted Server
2943 |A| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944 |S| 128-Port Asynchronous Controller, PCI bus
3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable
3631 |S| IBM ThinkVision C170 17-inch Color Monitor
3636 |A| L200P Flat Panel Monitor
3637 |A| IBM T541H /L150p 15" TFT Color Monitor, Business Black,
| | Captured Cable
3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable
3639 |S| IBM ThinkVision L170p Flat Panel Monitor
3640 |A| IBM ThinkVision L171p Flat Panel Monitor
3642 |A| ThinkVision L191p Flat Panel Monitor
4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15
| | pin D-shell)
4256 |A| Extender Cable - USB Keyboards, 2M
4962 |S| 10/100 Mbps Ethernet PCI Adapter II
5001 |A| Customer Service Specify
5005 |A| Software Preinstall
7801 |A| Ethernet Cable, 6M, Hardware Management Console to
| | System Unit
7802 |A| Ethernet Cable, 15M, Hardware Management Console to
| | System Unit
8120 |A| Attachment Cable, Hardware Management Console to Host,
| | 6-Meter
8121 |A| Attachment Cable, Hardware Management Console to Host,
| | 15-Meter
8122 |A| Attachment Cables, Hardware Management Console to
| | 7040-W42/61R, 6-Meter
8123 |A| Attachment Cables, Hardware Management Console to
| | 7040-W42/61R, 15-Meter
8131 |A| 128-Port Asynchronous Controller Cable, 4.5 Meter
8132 |A| 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
8133 |A| RJ-45 to DB-25 Converter Cable
8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232
8800 |A| Quiet Touch Keyboard - USB, Business Black, US English, #103P
8801 |A| Quiet Touch Keyboard - USB, Business Black, French, #189
8802 |A| Quiet Touch Keyboard - USB, Business Black, Italian, #142
8803 |A| Quiet Touch Keyboard - USB, Business Black, German/Austrian,
| | #129
8804 |A| Quiet Touch Keyboard - USB, Business Black, UK English, #166
8805 |A| Quiet Touch Keyboard - USB, Business Black, Spanish, #172
8806 |A| Quiet Touch Keyboard - USB, Business Black, Japanese, #194
8807 |A| Quiet Touch Keyboard - USB, Business Black,
| | Brazilian/Portuguese, #275
8817 |A| Quiet Touch Keyboard - USB, Business Black, Dutch,
| | #143
8821 |A| Quiet Touch Keyboard - USB, Business Black,
| | Hungarian, #208
8825 |A| Quiet Touch Keyboard - USB, Business Black,
| | Slovakian, #245
8826 |A| Quiet Touch Keyboard - USB, Business Black, Czech,
| | #243
8829 |A| Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
8833 |A| Quiet Touch Keyboard - USB, Business Black, Korean,
| | #413
8834 |A| Quiet Touch Keyboard - USB, Business Black, Chinese
| | #467
8835 |A| Quiet Touch Keyboard - USB, Business Black, French Canadian,
| | #445
8838 |A| Quiet Touch Keyboard - USB, Business Black, Russian, #443
8840 |A| Quiet Touch Keyboard - USB, Business Black, US English
| | (EMEA), #103P
8841 |A| Mouse - Business Black with Keyboard Attachment Cable
9004 |A| Southern Hemisphere Designator for Monitors
9300 |A| Language Group Specify - US English
9703 |A| Language Group Specify - French
9704 |A| Language Group Specify - German
9705 |A| Language Group Specify - Polish
9707 |A| Language Group Specify - Portuguese
9708 |A| Language Group Specify - Spanish
9711 |A| Language Group Specify - Italian
9712 |A| Language Group Specify - Canadian French
9714 |A| Language Group Specify - Japanese
9715 |A| Language Group Specify - Traditional Chinese (Taiwan)
9716 |A| Language Group Specify - Korean
9718 |A| Language Group Specify - Turkish
9719 |A| Language Group Specify - Hungarian
9720 |A| Language Group Specify - Slovakian
9721 |A| Language Group Specify - Russian
9722 |A| Language Group Specify - Simplified Chinese (PRC)
9724 |A| Language Group Specify - Czech
9800 |A| Power Cord Specify - United States/Canada
9802 |A| Power Cord Specify - Brazil (125V, 15A)
9820 |A| Power Cord Specify - Belgium, Finland, France, Indonesia,
| | Korea (250V, 16A)
9821 |A| Power Cord Specify - Denmark (250V, 10A)
9825 |A| Power Cord Specify - United Kingdom (250V, 13A)
9827 |A| Power Cord Specify - Israel (250V, 6-16A)
9828 |A| Power Cord Specify - Switzerland (250V, 10A)
9829 |A| Power Cord Specify - South Africa/Pakistan (250V, 16A)
9830 |A| Power Cord Specify - Italy/Chile (250V, 10A and 16A)
9831 |A| Power Cord Specify - Australia/New Zealand/Argentina (250V,
| | 10A)
9833 |A| Power Cord Specify - Thailand (250V, 15A)
9834 |A| Power Cord Specify - Uruguay (250V, 10A)
Model Conversions
None.
Back to top
Technical Description
|
The IBM 7315 Desktop Hardware Management Console Model C03 has a 3.0
GHz Intel Pentium 4 processor, 1 GB memory, 40 GB hard drive, two
integrated serial ports, one graphics port, one integrated 10/100 Mbps
Ethernet port, DVD-RAM drive, six USB ports, and three PCI slots.
- Height: 140 mm (5.5 inches)
- Width: 425 mm (16.7 inches)
- Depth: 425 mm (16.7 inches)
- Weight: 12.0 kgs (26.5 lbs)
- Temperature: 10 to 35 degrees C (50 to 95 degrees F)
- Relative Humidity: 8% to 80%
- Sound Power: 4.4 Bels (maximum)
Power Requirements
- Operating voltage: 110 V or 220 V ac 50/60 Hz (switch control on
back)
- Electrical output: 185 watts (maximum)
- Power source loading: 0.30 kva (maximum)
- Thermal Output:
- 75 joules/sec (257 Btu/hr) (minimum)
- 230 joules/sec (789 Btu/hr) (maximum)
EMC Conformance Classification
This equipment is subject to FCC rules and it shall comply with the
appropriate FCC rules before final delivery to the buyer or centers of
distribution.
- U.S. - FCC CFR47 Part 15 Class A
- Europe - CISPR 22 Class A; "CE" Mark of Conformity
- Japan - VCCI-1
- Korea - Korean Requirement Class A
Product Safety/Country Testing/Certification
- U.S.: UL
- Canada: CNL (CSA or cUL)
- Germany/Europe: GS Mark (Safety, TUV, EN60 950)
- An Ethernet connection between the HMC and each active partition on
the pSeries server is recommended. It is required for servers operating
in dynamic LPAR mode. This connection is used to provide:
- Additional systems management, such as Web-based System Manager of
AIX in the individual partitions
- Collection and passing of hardware service events to the HMC for
automatic notification of error conditions to IBM
- Total system inventory collection
- One serial port is required for each pSeries server controlled by the
HMC. An additional serial port is required for modem attachment if the
Service Agent call-home function is implemented. When more than two
serial ports are required, 8-port (#2943) and 128-port (#2944)
asynchronous PCI adapters should be used.
- A combined maximum of two 8-Port and 128-Port Asynchronous Adapters
are allowed per HMC Model C03.
Software or Licensed Machine Code Requirements
Each 7315-C03 Hardware Management Console must include either
Software or Licensed Machine Code as follows:
- Hardware Management Console Recovery Software for pSeries
(5639-N47) V2.3, or later, with a 1-year (5639-SB1 and 5639-ST1)
or 3-year (5639-SB3 and 5639-ST3) Software Maintenance contract
for Hardware Management Console Recovery Software
OR
- Hardware Management Console for POWER4 Licensed Machine Code
- (Feature #0960)
- Model C03 Hardware Management Consoles ordered for shipment
before May 28, 2004 require the Hardware Management Console
Recover Software for pSeries (5639-N47) on the initial order. The
Hardware Management Console for POWER4 Licensed Machine Code
feature #0960 may be ordered via MES for these Hardware Management
Consoles after installation if desired.
- Model C03 Hardware Management Consoles ordered for shipment on
or after May 28, 2004 must be ordered with feature #0960 Hardware
Management Console for POWER4 Licensed Machine Code.
- A renewable remote support offering governed by the Agreement
for Machine Control Program Remote Support is available for 7315
models. One year is mandatory with new orders.
Back to top
Publications
|
The following publications are shipped with the 7315-C03 Desktop
Hardware Management Console. Additional copies are available. To order,
contact your IBM representative.
Title Order Number
------------------------------------------- ------------
IBM Hardware Management Console for pSeries SA38-0590
Installation and Operations Guide
System Unit Safety Information SA23-2652
Refer to the Related Publications section of the HMC
Installation and Operations Guide for information regarding other
available HMC publications, or on the Web, visit the IBM eServer pSeries
Information Center:
http://publib16.boulder.ibm.com/pseries/en_US/infocenter/base
Back to top
Features -- Specify/Special/Exchange
|
Specify Features for Machine Type 7315
- LANGUAGES
- (#9300) - Language Group Specify - US English
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9718) - Language Group Specify - Turkish
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- (#9724) - Language Group Specify - Czech
- LINECORDS
- (#9800) - Power Cord Specify - United States/Canada
- (#9802) - Power Cord Specify - Brazil (125V, 15A)
- (#9820) - Power Cord Specify - Belgium, Finland, France, Indonesia,
Korea (250V, 16A)
- (#9821) - Power Cord Specify - Denmark (250V, 10A)
- (#9825) - Power Cord Specify - United Kingdom (250V, 13A)
- (#9827) - Power Cord Specify - Israel (250V, 6-16A)
- (#9828) - Power Cord Specify - Switzerland (250V, 10A)
- (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
- (#9830) - Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- (#9831) - Power Cord Specify - Australia/New Zealand/Argentina (250V,
10A)
- (#9833) - Power Cord Specify - Thailand (250V, 15A)
- (#9834) - Power Cord Specify - Uruguay (250V, 10A)
- MISCELLANEOUS
- (#5005) - Software Preinstall
- (#0966) - pSeries Indicator
- (#0986) - CCS Customer Service Specify (US)
- (#1204) - Order Routing Indicator - Product will be used with a 24"
Rack Mounted Server
- (#5001) - Customer Service Specify
- SPECIFY CODES
- (#9004) - Southern Hemisphere Designator for Monitors
Special Features - Initial Orders
Special Features - Plant and/or Field Installable
- ADAPTERS
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- CABLES
- (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15
pin D-shell)
- (#4256) - Extender Cable - USB Keyboards, 2M
- (#7801) - Ethernet Cable, 6M, Hardware Management Console to System
Unit
- (#7802) - Ethernet Cable, 15M, Hardware Management Console to System
Unit
- (#8120) - Attachment Cable, Hardware Management Console to Host,
6-Meter
- (#8121) - Attachment Cable, Hardware Management Console to Host,
15-Meter
- (#8122) - Attachment Cables, Hardware Management Console to
7040-W42/61R, 6-Meter
- (#8123) - Attachment Cables, Hardware Management Console to
7040-W42/61R, 15-Meter
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- DISPLAYS
- (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H /L150p 15" TFT Color Monitor, Business Black,
Captured Cable
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - IBM ThinkVision L171p Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- KEYBOARDS
- (#8800) - Quiet Touch Keyboard - USB, Business Black, US English,
#103P
- (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189
- (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142
- (#8803) - Quiet Touch Keyboard - USB, Business Black,
German/Austrian, #129
- (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English,
#166
- (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172
- (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194
- (#8807) - Quiet Touch Keyboard - USB, Business Black,
Brazilian/Portuguese, #275
- (#8817) - Quiet Touch Keyboard - USB, Business Black, Dutch, #143
- (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
- (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
- (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243
- (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish,
#171
- (#8833) - Quiet Touch Keyboard - USB, Business Black, Korean, #413
- (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese #467
- (#8835) - Quiet Touch Keyboard - USB, Business Black, French
Canadian, #445
- (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443
- (#8840) - Quiet Touch Keyboard - USB, Business Black, US English
(EMEA), #103P
- MISCELLANEOUS
- (#0960) - Hardware Management Console for POWER4 Licensed Machine
Code
- (#0961) - Hardware Management Console for POWER5 Licensed Machine
Code
- (#8841) - Mouse - Business Black with Keyboard Attachment Cable
Feature Descriptions
The following is a list of all feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.
The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.
(#0960) Hardware Management Console for POWER4 Licensed Machine Code
Licensed machine code provides GUI interface for LPAR and dynamic
Capacity Upgrade on Demand (CUoD) for POWER4/POWER4+ Serial
connections. Functions provided include:
- Creating and storing LPAR profiles that define the processor, memory,
and I/O resources allocated to an individual partition.
- Starting, stopping, and resetting a system partition
- Booting a partition or system by selecting a profile
- Displaying system and partition status
- Displaying a virtual operator panel of the contents for each
partition or controlled system
- Providing a service focal point for the systems it controls.
- Attributes provided: Hardware Management Console Control Functions
- Attributes required: Hardware Management Console
- For 7315-C03: (#0960)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#0961) Hardware Management Console for POWER5 Licensed Machine Code
Licensed machine code provides GUI interface for LPAR and dynamic
Capacity Upgrade on Demand (CUoD) for POWER5 Ethernet connections.
- Attributes provided: Hardware Management Console Control Function
- Attributes required: Hardware Management Console
- For 7315-C03: (#0961)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0 )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#0966) pSeries Indicator
This feature is used to indicate the Hardware Management Console will
be used to control IBM pSeries products.
- Attributes provided: pSeries Indicator
- Attributes required: an IBM pSeries Product
- For 7315-C03: (#0966)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#0986)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#1204) Order Routing Indicator - Product will be used with a 24" Rack Mounted Server
This feature indicates this device is being ordered for use with a
server mounted in a 24" rack. It is used to route the order for this
device to the plant of manufacture for the server.
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 7315-C03: (#2943)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#2944) 128-Port Asynchronous Controller, PCI bus
(No Longer Available as of March 31, 2006)
The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.
RANs can also be used with this adapter. If these RANs are connected
the synchronous channel the data rate drops down to 1.2 Mbps. For the
best results keep the previous and new RAN's on separate synchronous
channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 7315-C03: (#2944)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3631) IBM ThinkVision C170 17-inch Color Monitor
(No Longer Available as of March 31, 2006)
The IBM ThinkVision C170 color monitor has the following general
characteristics:
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable
(No Longer Available as of February 27, 2004)
The P260/P275 monitor has the following general characteristics:
- Business Black color
- 21-inch Flat Trinitron** CRT with a viewable image size of 503 mm
(19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum
addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.
Note: The P260 and P275 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7315-C03: (#3628)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3636) L200P Flat Panel Monitor
The L200p flat-panel monitor has the following general
characteristics:
- Business Black color
- 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm
(20.1 inches) measured diagonally, incorporating a 0.255 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7315-C03: (#3636)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3637) IBM T541H /L150p 15" TFT Color Monitor, Business Black, Captured Cable
Both the T541H and L150p monitors have the following general
characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 7315-C03: (#3637)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
(No Longer Available as of June 24, 2005)
The IBM C220p monitor has the following general characteristics:
- Business Black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7315-C03: (#3638)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3639) IBM ThinkVision L170p Flat Panel Monitor
(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:
- Business color
- 17.0-inch LCD digital screen with a viewable image size of
432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm
pixel pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7315-C03: (#3639)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
The IBM ThinkVision L171p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
- Contrast ratio: 500:1 (minimal) 700:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7315-C03: (#3640)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3642) - ThinkVision L191P Flat Panel Monitor
The ThinkVision L191p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7315-C03: (#3642)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
This cable is required to connect displays with a 15-pin "D" shell
connector to the appropriate accelerator connector when it is farther
away than the attached monitor cable can reach. Rack mounted systems are
likely candidates for this extender cable.
- Attributes provided: 6-foot extension cable
- Attributes required: Supported monitor and adapter with a 15-pin "D"
shell connector.
- For 7315-C03: (#4242)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4256) Extender Cable - USB Keyboards, 2M
This feature provides a 2M extension cable for use with USB keyboards.
- Attributes provided: 2M Extension Cable
- Attributes required: USB Keyboard
- For 7315-C03: (#4256)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4962) 10/100 Mbps Ethernet PCI Adapter II
(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
- Half / Full Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates)and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later. Note: This IP Security function
is not supported with AIX 4.3 software.
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 7315-C03: (#4962)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5001) Customer Service Specify
This feature code specifies that the system will receive special
request services from the Center for Customer Services (CCS) in
Rochester.
- Attributes provided: Customization
- Attributes required: None
- For 7315-C03: (#5001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5005) Software Preinstall
Licensed programs may be preinstalled on the media selected. To order
this option, specify code (#5005) on the initial system order. The
preinstalled licensed programs will be at the same release level as
programs being shipped from the Program Libraries at the time the system
is manufactured.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#5005)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#7801) Ethernet Cable, 6M, Hardware Management Console to System Unit
This feature provides a six meter long Ethernet cable for attachment
of a Hardware Management Console to the system unit.
- Attributes provided: 6M Ethernet Cable
- Attributes required: Ethernet port on Hardware Management Console
- For 7315-C03: (#7801)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7802) Ethernet Cable, 15M, Hardware Management Console to System Unit
This feature provides a fifteen meter long Ethernet cable for
attachment of a Hardware Management Console to the system unit.
- Attributes provided: 15M Ethernet Cable
- Attributes required: Ethernet port on Hardware Management Console
- For 7315-C03: (#7802)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8120) Attachment Cable, Hardware Management Console to Host, 6-Meter
This 6-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a
9-pin female connector for HMC connection and a 9-pin male
connection to attach to the HMC port on the host system. A 9-pin to
25-pin adapter is also provided.
- Attributes provided: 6-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7315-C03: (#8120)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8121) Attachment Cable, Hardware Management Console to Host, 15-Meter
This 15-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a
9-pin female connector for HMC connection and a 9-pin male
connection to attach to the HMC port on the host system. A 9-pin to
25-pin adapter is also provided.
- Attributes provided: 15-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7315-C03: (#8121)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8122) Attachment Cables, Hardware Management Console to 7040-W42/61R, 6-Meter
These 6-meter cables provide an asynch connection between the HMC
(Hardware Management Console) and the7040-W42 or 7040-61R power system.
A pair of RS-422 to EIA 232 converters are included with this feature.
- Attributes provided: Two 6-meter HMC attachment cables and two
RS-422 to EIA 232 converters.
- Attributes required: Two empty RS-422 asynch ports attached to an
HMC, or two empty EIA 232 asynch ports attached to an HMC.
- For 7315-C03: (#8122)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8123) Attachment Cables, Hardware Management Console to 7040-W42/61R, 15-Meter
These 15-meter cables provide an asynch connection between the HMC
(Hardware Management Console) and the 7040-W42 or 7040-61R power system.
A pair of RS-422 to EIA 232 converters are included with this feature.
- Attributes provided: Two 15-meter HMC attachment cables and two
RS-422 to EIA 232 converters.
- Attributes required: Two empty RS-422 asynch ports attached to an
HMC, or two empty EIA 232 asynch ports attached to an HMC.
- For 7315-C03: (#8123)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7315-C03: (#8131)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7315-C03: (#8132)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8133) RJ-45 to DB-25 Converter Cable
This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 7315-C03: (#8133)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 7315-C03: (#8137)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P
This feature provides a USB attached US English #103P keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8801) Quiet Touch Keyboard - USB, Business Black, French, #189
This feature provides a USB attached French #189 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8801)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142
This feature provides a USB attached Italian #142 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8802)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8803) Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129
This feature provides a USB attached German/Austrian #129 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8803)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166
This feature provides a USB attached UK English #166 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8804)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172
This feature provides a USB attached Spanish #172 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8805)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194
This feature provides a USB attached Japanese #194 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8806)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275
This feature provides a USB attached Brazilian Portuguese #275
keyboard.
(#8817) Quiet Touch Keyboard - USB, Business Black, Dutch, #143
This feature provides a USB attached Dutch #143 keyboard.
(#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
This feature provides a USB attached Hungarian #208 keyboard.
(#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
This feature provides a USB attached Slovakian #245 keyboard.
(#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243
This feature provides a USB attached Czech #243 keyboard.
(#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
This feature provides a USB attached LA Spanish #171 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8833) Quiet Touch Keyboard - USB, Business Black, Korean, #413
This feature provides a USB attached Korean #413 keyboard.
(#8834) Quiet Touch Keyboard - USB, Business Black, Chinese #467
This feature provides a USB attached Chinese/US #467 keyboard.
(#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445
This feature provides a USB attached French Canadian #445 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8835)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443
This feature provides a USB attached Russian #443 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8838)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P
This feature provides a USB attached US English #103P (EMEA) keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7315-C03: (#8840)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8841) Mouse - Business Black with Keyboard Attachment Cable
This feature provides a three button mouse and a cable for attachment
to a keyboard.
- Attributes provided: 3-Button Mouse
- Attributes required: Keyboard with Mouse Attachment Port
- For 7315-C03: (#8841)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9004) Southern Hemisphere Designator for Monitors
Specifies that southern hemisphere models are required for all CRT
monitors on the initial plant order or on MES orders. Not required with
TFT monitors.
- Attributes provided: None
- Attributes required: Monitor
- For 7315-C03: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7315-C03: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9718) Language Group Specify - Turkish
Turkish language group for nomenclature and publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7315-C03: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7315-C03: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9721) Language Group Specify - Russian
Russian language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for nomenclature and standard
publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9724) Language Group Specify - Czech
Czech language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7315-C03: (#9724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9800) Power Cord Specify - United States/Canada
The following countries use the #9800 power cord to power the system
unit and/or peripheral features requiring a power cord.
- DOM U.S.
- 649 CANADA
- 832 SAUDI ARABIA
- 619 BAHAMAS
- 621 BARBADOS
- 627 BERMUDA
- 629 BOLIVIA
- 631 BRAZIL
- 661 COLOMBIA
- 663 COSTA RICA
- 681 DOMINICAN REPUBLIC
- 683 ECUADOR
- 829 EL SALVADOR
- 731 GUATEMALA
- 640 GUYANA
- 735 HONDURAS
- 759 JAMAICA
- 781 MEXICO
- 791 NETHERLANDS ANTILLES
- 811 PANAMA
- 843 SURINAM
- 859 TRINIDAD
- 871 VENEZUELA
- 760 JAPAN
- 761 JAPAN (PDS)
- 766 KOREA
- 818 PHILIPPINES
- 858 TAIWAN
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9802) Power Cord Specify - Brazil (125V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9802)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9820) Power Cord Specify - Belgium, Finland, France, Indonesia, Korea (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9820)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9821) Power Cord Specify - Denmark (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9821)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9825) Power Cord Specify - United Kingdom (250V, 13A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9825)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9827) Power Cord Specify - Israel (250V, 6-16A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9827)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9828) Power Cord Specify - Switzerland (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9828)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9830) Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9830)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9831) Power Cord Specify - Australia/New Zealand/Argentina (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9831)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9833) Power Cord Specify - Thailand (250V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9833)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#9834) Power Cord Specify - Uruguay (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7315-C03: (#9834)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|