Model D11 provides I/O expansion for the IBM eServer p5 570 system. For complete, detailed product positioning information refer to Hardware announcement 102-xxx, dated July 13, 2004.
Back to top
 

Model

Model Summary Matrix Model Slot Maximum Cabinet Type D11 6 PCI 4U Rack-mount Customer Setup (CSU) Customer Setup Box: No Customer Setup MES: Yes Devices Supported The following external machine types are supported on the indicated models for MT 7311. This list is not all inclusive. Many devices are supported through standard ports. Please refer to the sales manual of the external machine type and the list of supported devices in the appropriate section of the AIX sales manual for further attach support information. |D| X = SUPPORTED DEVICE |1| |1| | | MT-MOD | | DESCRIPTION ---------|-|----------------------------------------- ---------+-+--------TAPE----------------------------- 7210-030 |X| IBM 7210-030 External DVD-RAM Drive Feature Availability Matrix The following feature availability matrix for MT 7311 uses the letter "A" to indicate features that are available and orderable on the specified models. "S" indicates a feature that is supported on this model during a model conversion; these features will work on this model, but additional quantities of these features cannot be ordered on this model; they can only be removed. "N" indicates that the feature is not supported on this model and must be removed during the model conversion. As additional features are announced, supported, or withdrawn, this list will be updated. Please check with your Marketing Representative for additional information. |D| A = AVAILABLE S = SUPPORTED |1| N = NOT SUPPORTED, MUST BE REMOVED |1| | | FEAT/PN | | DESCRIPTION --------|-|----------------------------------------- 0986 |A| CCS Customer Service Specify (US) 1820 |A| PCI-X Dual-port 4x IB HCA 1835 |A| 3 meter 4x IB Cable 1836 |A| 8 meter 4x IB Cable 1839 |A| 1.5 meter 4x IB Cable 2114 |A| PCI SCSI Adapter 16-Bit Differential External Y Cable 2118 |A| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M 2424 |S| 0.6M 16-bit SCSI-2 System to System Cable 2425 |A| 2.5M 16-bit SCSI-2 System to System Cable 2456 |A| LC-SC 50 Micron Fiber Converter Cable 2459 |A| LC-SC 62.5 Micron Fiber Converter Cable 2591 |A| External USB 1.44 MB Diskette Drive 2732 |S| IBM Short-wave Serial HIPPI PCI Adapter for RS/6000 2737 |S| Keyboard/Mouse Attachment Card - PCI 2738 |A| 2 Port USB PCI Adapter 2849 |A| POWER GXT135P Graphics Accelerator with Digital Support 2861 |A| ARTIC960Hx 4-Port EIA-232 Cable 2863 |A| ARTIC960Hx 4-Port X.21 Cable 2864 |A| ARTIC960Hx 4-Port V.35 (DTE) Cable 2877 |A| IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable 2934 |A| Asynchronous Terminal/Printer Cable EIA-232 2936 |A| Asynchronous Cable EIA-232/V.24 2943 |A| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus 2944 |S| 128-Port Asynchronous Controller, PCI bus 2947 |A| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter 2951 |S| Cable, V.24 / EIA-232 2952 |S| Cable, V.35 2953 |S| Cable, V.36 / EIA-499 2954 |S| Cable, X.21 2962 |S| 2-Port Multiprotocol PCI Adapter 3124 |A| Serial to Serial Port Cable for Drawer/Drawer 3125 |A| Serial to Serial Port Cable for Rack/Rack 3146 |A| RIO-2 (Remote I/O-2) Cable, 1.2M 3147 |A| RIO-2 (Remote I/O-2) Cable, 3.5M 3148 |A| RIO-2 (Remote I/O-2) Cable, 10M 3636 |A| L200P Flat Panel Monitor 3637 |A| IBM T541H /L150p 15" TFT Color Monitor 3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable 3639 |S| IBM ThinkVision L170p Flat Panel Monitor 3640 |A| IBM ThinkVision L171p Flat Panel Monitor 3642 |A| ThinkVision L191p Flat Panel Monitor 4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15 | | pin D-shell) 4256 |A| Extender Cable - USB Keyboards, 2M 4353 |S| H-100 Bus 8-position Cable 4651 |A| Rack Indicator, Rack #1 4652 |A| Rack Indicator, Rack #2 4653 |A| Rack Indicator, Rack #3 4654 |A| Rack Indicator, Rack #4 4655 |A| Rack Indicator, Rack #5 4656 |A| Rack Indicator, Rack #6 4657 |A| Rack Indicator, Rack #7 4658 |A| Rack Indicator, Rack #8 4659 |A| Rack Indicator, Rack #9 4691 |S| Rack Status Beacon Cable, Junction Box To Drawer Or Status | | Beacon 4692 |S| Rack Status Beacon Cable, Junction Box Daisy Chain 4693 |S| Rack Status Beacon Junction Box 4957 |S| IBM 64bit/66MHz PCI ATM 155 MMF Adapter 4959 |S| IBM Token-Ring PCI Adapter 4961 |S| IBM Universal 4-Port 10/100 Ethernet Adapter 4962 |S| 10/100 Mbps Ethernet PCI Adapter II 5001 |A| Customer Service Specify 5700 |A| IBM Gigabit Ethernet-SX PCI-X Adapter 5701 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter 5703 |A| PCI-X Dual Channel Ultra320 SCSI RAID Adapter 5706 |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter 5707 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter 5712 |S| PCI-X Dual Channel Ultra320 SCSI Adapter 5716 |A| 2 Gigabit Fibre Channel PCI-X Adapter 5718 |A| 10 Gigabit Ethernet-SR PCI-X Adapter 5719 |A| IBM 10 Gigabit Ethernet-LR PCI-X Adapter 5723 |A| 2 Port Asynchronous EIA-232 PCI Adapter 5736 |A| PCI-X DDR Dual Channel Ultra320 SCSI Adapter 6001 |A| Power Control Cable (SPCN) - 2 meter 6006 |A| Power Control Cable (SPCN) - 3 meter 6007 |A| Power Control Cable (SPCN) - 15 meter 6008 |A| Power Control Cable (SPCN) - 6 meter 6204 |S| PCI Universal Differential Ultra SCSI Adapter 6230 |S| Advanced SerialRAID Plus Adapter 6231 |S| 128 MByte DRAM Option Card 6235 |S| 32 MByte Fast-Write Cache Option Card 6276 |A| AC Power Supply, 288W 6438 |A| RIO-2 Remote I/O Loop Adapter 6451 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #69 6452 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #62 6453 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #2 6454 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #66 6455 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #5 6456 |A| Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), | | Right Angle, Plug Type #5 (Denan marking) 6459 |A| Power Cord - Drawer To IBM PDU, 4M, Right Angle 6461 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #18 6462 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #19 6463 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #23 6464 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #32 6465 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #24 6466 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #22 6467 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #25 6468 |N| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #6 6470 |A| Power Cord - United States/Canada 6471 |A| Power Cord - Brazil (125V, 15A) 6472 |A| Power Cord - Belgium, Finland, France, Indonesia, Korea | | (250V, 16A) 6473 |A| Power Cord - Denmark (250V, 10A) 6474 |A| Power Cord - United Kingdom (250V, 13A) 6475 |A| Power Cord - Israel (250V, 6-16A) 6476 |A| Power Cord - Switzerland (250V, 10A) 6477 |A| Power Cord - South Africa/Pakistan (250V, 16A) 6478 |A| Power Cord - Italy/Chile (250V, 10A and 16A) 6479 |N| Power Cord - Australia/New Zealand/Argentina (250V, 10A) 6487 |A| Power Cord - Thailand (250V, 15A) 6488 |A| Power Cord - Uruguay (250V, 10A) 6493 |A| Power Cord - China (250V,10A) 6494 |A| Power Cord - India (250V/10A) 6495 |A| Power Cord - Brazil (250V,10A) 6496 |A| Power Cord - Korea (250V, 10A) 6499 |A| Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type | | #73 6582 |A| Planar Board, 6 PCI-X Slots 6583 |A| Air Blower 6651 |A| Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug | | Type #75 6659 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug | | Type #76 6663 |A| Power Cord (14-foot), To Wall/OEM PDU, (250V, 10A), Right | | Angle, Plug Type #76 6670 |A| Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 | | (Denan marking) 6680 |A| Power Cord (9-foot) , To Wall/OEM PDU, (250V, 10A), Plug | | Type #6, Insulated 6681 |A| Power Cord (14-foot), Drawer to OEM PDU, (250V, 10A), | | Right Angle, Plug Type #6, Insulated 6687 |A| Power Cord (6-foot),To Wall, (250V, 15A), Plug Type #5 | | (Denan marking) 7311 |A| Rack Mount I/O Drawer Enclosure, Two Position 7862 |A| PCI Blind Swap Cassette Kit, Single Wide Adapters, Type II 8131 |A| 128-Port Asynchronous Controller Cable, 4.5 Meter 8132 |A| 128-Port Asynchronous Controller Cable, 23cm (9-Inch) 8133 |A| RJ-45 to DB-25 Converter Cable 8136 |S| Rack Mountable Remote Asynchronous Node 16-Port EIA-232 8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232 8453 |A| Customer Specified Placement , Initial Order Only 8800 |A| Quiet Touch Keyboard - USB, Business Black, US English, | | #103P 8801 |A| Quiet Touch Keyboard - USB, Business Black, French, #189 8802 |A| Quiet Touch Keyboard - USB, Business Black, Italian, #142 8803 |A| Quiet Touch Keyboard - USB, Business Black, German | | Austrian, #129 8804 |A| Quiet Touch Keyboard - USB, Business Black, UK English, #166 8805 |A| Quiet Touch Keyboard - USB, Business Black, Spanish, #172 8806 |A| Quiet Touch Keyboard - USB, Business Black, Japanese, #194 8807 |A| Quiet Touch Keyboard - USB, Business Black, | | Brazilian/Portuguese, #275 8808 |A| Quiet Touch Keyboard - USB, Business Black, Canadian | | French, #058 8810 |A| Quiet Touch Keyboard - USB, Business Black, Belgian Dutch, | | #120 8811 |A| Quiet Touch Keyboard - USB, Business Black, | | Swedish/Finnish, #153 8812 |A| Quiet Touch Keyboard - USB, Business Black, Danish, #159 8813 |A| Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442 8814 |A| Quiet Touch Keyboard - USB, Business Black, | | Swiss/French/German, #150F/G 8816 |A| Quiet Touch Keyboard - USB, Business Black, Norwegian, #155 8817 |A| Quiet Touch Keyboard - USB, Business Black, Dutch, #143 8818 |A| Quiet Touch Keyboard - USB, Business Black, Portuguese, #163 8819 |A| Quiet Touch Keyboard - USB, Business Black, Greek, #319 8820 |A| Quiet Touch Keyboard - USB, Business Black, Hebrew, #212 8821 |A| Quiet Touch Keyboard - USB, Business Black, Hungarian, #208 8823 |A| Quiet Touch Keyboard - USB, Business Black, Polish, #214 8825 |A| Quiet Touch Keyboard - USB, Business Black, Slovakian, #245 8826 |A| Quiet Touch Keyboard - USB, Business Black, Czech, #243 8827 |A| Quiet Touch Keyboard - USB, Business Black, Turkish, #179 8829 |A| Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171 8830 |A| Quiet Touch Keyboard - USB, Business Black, Arabic, #238 8833 |A| Quiet Touch Keyboard - USB, Business Black, Korean, #413 8834 |A| Quiet Touch Keyboard - USB, Business Black, Chinese #467 8835 |A| Quiet Touch Keyboard - USB, Business Black, French | | Canadian, #445 8836 |A| Quiet Touch Keyboard - USB, Business Black, Thai, #191 8838 |A| Quiet Touch Keyboard - USB, Business Black, Russian, #443 8839 |A| Quiet Touch Keyboard - USB, Business Black, | | Yugoslavian/Latin, #105 8840 |A| Quiet Touch Keyboard - USB, Business Black, US English | | (EMEA), #103P 8841 |A| Mouse - Business Black with Keyboard Attachment Cable 9004 |A| Southern Hemisphere Designator for Monitors 9006 |A| Linux Configuration Indicator 9172 |A| Power Specify, AC 9300 |A| Language Group Specify - US English 9700 |A| Language Group Specify - Dutch 9703 |A| Language Group Specify - French 9704 |A| Language Group Specify - German 9705 |A| Language Group Specify - Polish 9707 |A| Language Group Specify - Portuguese 9708 |A| Language Group Specify - Spanish 9711 |A| Language Group Specify - Italian 9712 |A| Language Group Specify - Canadian French 9714 |A| Language Group Specify - Japanese 9715 |A| Language Group Specify - Traditional Chinese (Taiwan) 9716 |A| Language Group Specify - Korean 9718 |A| Language Group Specify - Turkish 9719 |A| Language Group Specify - Hungarian 9720 |A| Language Group Specify - Slovakian 9721 |A| Language Group Specify - Russian 9722 |A| Language Group Specify - Simplified Chinese (PRC) 9724 |A| Language Group Specify - Czech 9725 |A| Language Group Specify - Romanian 9727 |A| Language Group Specify - Slovenian   Model Conversions None. Back to top   Technical Description Physical Specifications Operating Environment Limitations Hardware Requirements Software Requirements Physical Specifications For two 7311-D11 drawers in a 7311 rack-mount enclosure: Width: 445 mm (17.5 in) Depth: 711 mm (28.0 in) Height: 175 mm (6.9 in) Weight: 39.1 kg (86 lb) maximum For one 7311-D11 drawer without a rack-mount enclosure: Width: 217 mm (8.6 in) Depth: 711 mm (28.0 in) Height: 168 mm (6.6 in) Weight: 16.8 kg (37 lb) maximum To assure installability and serviceability in non-IBM, industry-standard racks, review the installation planning information for any product-specific installation requirements. Operating Environment Temperature: 10 to 38 degrees C (50 to 100 F) Relative humidity: 8% to 80% Maximum wet bulb: 23 degrees C (73 F) Noise level: Sound power: 5.6 bels Idle/5.6 bels (operating) Sound pressure: 44 dBa Idle/45 dBa (operating) Power requirements Operating voltage: 200 to 240 V ac 50/60 Hz Electrical output: 150 watts (typical); 225 watts (maximum) Power source loading: 0.158 kVA (typical configuration) 0.240 kVA (maximum configuration) Thermal output: 150 joules/sec (512 Btu/hr, typical configuration) 225 joules/sec (768 Btu/hr, maximum configuration) EMC conformance classification This equipment is subject to FCC rules, and it shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution: U.S.: FCC CFR47 Part 15 Class A Europe: CISPR 22 Class A; "CE" Mark of Conformity Japan: VCCI-1 Korea: Korean Requirement Class A Homologation: Telecom Environmental Testing (Safety and EMC) Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude. This pSeries model and applicable features meet the environmental testing requirements of the country Telecom and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom Regulatory authority. Product safety/Country testing/Certification U.S.: UL Canada: CNL (CSA or cUL) Germany/Europe: GS Mark (Safety, TUV, EN60 950) General requirements The model 7311-D11 is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration). Limitations Power Redundant power supplies are required on model D11 I/O drawers. Two power supplies must be ordered for each drawer to provide redundancy for enhanced system availability. Racks Model D11 drawers are packaged as rack-mounted devices and are supported in the IBM 7014-T00 and T42 racks. An existing 7014 rack can be utilized for model D11 drawers if sufficient space and power are available. Other peripheral devices such as SCSI or SSA disk subsystems or tape subsystems can share the rack with model D11 drawers. Model D11 drawers can occupy the same rack as the attached model 570, or can be in an adjacent rack. The appropriate attachment cable lengths should be ordered, based on the specific installation. I/O drawer attachment The p5-570 system allows up to twenty I/O drawers to be attached. It is recommended the I/O drawers be located in the same rack as the server drawer for service purposes; however, they can be mounted in separate racks, if desired. I/O drawers are connected to the server drawer via the following cables: RIO-2 cables for data transfer Power control cables RIO cable connections are always made in loops to help protect against a single point-of-failure resulting from an open, missing, or disconnected cable. Systems with nonlooped configurations could experience degraded performance and serviceability. If a nonloop connection is detected, a problem is reported. Up to eight RIO loops are available, each supporting up to four I/O drawers and up to a maximum of 20 I/O drawers. A minimum of two RIO cables are required to attach the first I/O drawer on each RIO loop. A third drawer-to-drawer RIO cable is required to complete the loop when an additional I/O drawer is attached to the loop. RIO cables are available in various lengths (#3146 = 1.2 meters, #3147 = 3.5 meters, and #3148 = 10 meters) to attach I/O drawers within a single rack or across multiple racks, if desired. Power control for each I/O drawer is provided from each model 570 drawer via one loop. The number of Power Control (SPCN) cables required is equal to one plus the number of I/O drawers attached to the server drawer. A minimum of two power control cables (#6001 = 2 meters, #6006 = 3 meters, #6007 = 15 meters, or #6008 = 6 meters) is required for attachment of the first D11 drawer to the server drawer. Each additional I/O drawer requires one additional power control cable to complete the loop attachment. PCI slots and adapters The model D11 PCI slot population rules are complex when combined with the PCI slot population rules for the host system. Refer to the p5-570 Sales Manual pages for combined adapter limitations. Extensive configuration rules and checking procedures are incorporated into the ECFGRS6000 configurator to help ensure valid system configurations. Configurations generated without utilizing the ECFGRS6000 configurator can create orders that cannot be manufactured, resulting in possible order rejection and delayed delivery. System maximum limits for adapters and devices cannot provide optimal system performance. These limits are given to help assure connectivity and functionality. Hot-plug options It is not necessary to power down the system to install hot-plug options. Information regarding hot-plugging procedures may be found in the installation and replacement instructions included with your system order. Any PCI adapter supporting the system boot device or system console is not hot-plugged. The following adapters are not hot-plug capable: POWER GXT135P Graphics Accelerator with digital support (#2849) 2-Port Multiprotocol PCI Adapter (#2962) Hardware Requirements The model D11 must be installed in a new or existing IBM 7014 or equivalent rack. This helps assure the following are met: Proper dimensions Mounting surfaces Power distribution Ventilation Stability Other functional requirements The recommended rack is the IBM 7014 model T00 or T42. 7311-D11 - Minimum system configuration The 7311-D11 I/O drawer provides six slots for PCI adapters. It is designed to be mounted in a 19-inch rack, using the rack-mount enclosure (#7311), which can accommodate either one or two 7311-D11 I/O drawers in 4 U of rack space. The minimum configuration for a 7311-D11 I/O drawer must include the following items: One Rack-Mount I/O Drawer Enclosure, Two Position (#7311) Two AC Power Supplies, 288W (#6276) One Remote I/O Loop Adapter (#6438) Two Remote I/O Cables (#3146, #3147, or #3148) Two Power Control Cables (#6001, #6006, #6007, or #6008) One AC Power Specify (#9172) One Language Group Specify (#9XXX) Two Power Cords (#64XX) One Air Blower (#6583) One Planar Board, six PCI-X Slots (#6582) Additional optional features can be added, as desired. When adding more than one 7311-D11 I/O drawer to a system, only one additional power control cable and one additional remote I/O cable are required, up to a maximum of four I/O drawers per remote I/O loop. If additional remote I/O ports are available on the system unit, direct attachment is recommended via two remote I/O cables per I/O drawer. Software Requirements AIX 5L V5.2 or V5.3, or later; or Linux releases supported on the IBM eServer p5 570. Back to top   Publications To obtain and print the most current installation and replacement instructions visit: http://www.ibm.com/servers/library/infocenter Select your continent Then select your language and IBM @server hardware Then select 'Installing hardware' Then 'Installing features' Alternatively, you can use the instructions on the IBM @server Hardware Information Center CD-ROM that is included with your system hardware order. Back to top   Features -- Specify/Special/Exchange No Charge Specify Codes Special Feature Codes -- Chargeable Feature Exchanges No Charge Specify Codes LANGUAGES (#9300) - Language Group Specify - US English (#9700) - Language Group Specify - Dutch (#9703) - Language Group Specify - French (#9704) - Language Group Specify - German (#9705) - Language Group Specify - Polish (#9707) - Language Group Specify - Portuguese (#9708) - Language Group Specify - Spanish (#9711) - Language Group Specify - Italian (#9712) - Language Group Specify - Canadian French (#9714) - Language Group Specify - Japanese (#9715) - Language Group Specify - Traditional Chinese (Taiwan) (#9716) - Language Group Specify - Korean (#9718) - Language Group Specify - Turkish (#9719) - Language Group Specify - Hungarian (#9720) - Language Group Specify - Slovakian (#9721) - Language Group Specify - Russian (#9722) - Language Group Specify - Simplified Chinese (PRC) (#9724) - Language Group Specify - Czech (#9725) - Language Group Specify - Romanian (#9727) - Language Group Specify - Slovenian POWER (#9172) - Power Specify, AC MISCELLANEOUS (#0986) - CCS Customer Service Specify (US) (#5001) - Customer Service Specify (#9006) - Linux Configuration Indicator SPECIFY CODES (#9004) - Southern Hemisphere Designator for Monitors (#4651) - Rack Indicator, Rack #1 (#4652) - Rack Indicator, Rack #2 (#4653) - Rack Indicator, Rack #3 (#4654) - Rack Indicator, Rack #4 (#4655) - Rack Indicator, Rack #5 (#4656) - Rack Indicator, Rack #6 (#4657) - Rack Indicator, Rack #7 (#4658) - Rack Indicator, Rack #8 (#4659) - Rack Indicator, Rack #9 VOLTAGE: A specify code for voltage/power is not required and will be provided by the configurator based on the country code of the order. Specify codes must be used when an alternative to the ELINK configurator default is required. LANGUAGE: A specify code is not required. Language will be provided by the plant based on the country code of the order. Specify codes must be used when an alternative to the ELINK configurator default is required. Special Feature Codes -- Chargeable Special Features - Initial Orders ADAPTERS (#6438) - RIO-2 Remote I/O Loop Adapter POWER (#6276) - AC Power Supply, 288W (#6583) - Air Blower MISCELLANEOUS (#6582) - Planar Board, 6 PCI-X Slots SPECIFY CODES (#8453) - Customer Specified Placement , Initial Order Only Special Features - Plant and/or Field Installable ADAPTERS (#1820) - PCI-X Dual-port 4x IB HCA (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus (#2944) - 128-Port Asynchronous Controller, PCI bus (#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter (#6204) - PCI Universal Differential Ultra SCSI Adapter (#6230) - Advanced SerialRAID Plus Adapter (#6231) - 128 MByte DRAM Option Card (#6235) - 32 MByte Fast-Write Cache Option Card (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter (#2849) - POWER GXT135P Graphics Accelerator with Digital Support (#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter (#4959) - IBM Token-Ring PCI Adapter (#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter (#4962) - 10/100 Mbps Ethernet PCI Adapter II (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5718) - 10 Gigabit Ethernet-SR PCI-X Adapter (#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter (#5723) - 2 Port Asynchronous EIA-232 PCI Adapter (#5736) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter (#2962) - 2-Port Multiprotocol PCI Adapter (#7862) - PCI Blind Swap Cassette Kit, Single Wide Adapters, Type II (#2732) - IBM Short-wave Serial HIPPI PCI Adapter for RS/6000 (#2737) - Keyboard/Mouse Attachment Card - PCI (#2738) - 2 Port USB PCI Adapter CABLES (#1835) - 3 meter 4x IB Cable (#1836) - 8 meter 4x IB Cable (#1839) - 1.5 meter 4x IB Cable (#2934) - Asynchronous Terminal/Printer Cable EIA-232 (#2936) - Asynchronous Cable EIA-232/V.24 (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch) (#8133) - RJ-45 to DB-25 Converter Cable (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232 (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M (#2424) - 0.6M 16-bit SCSI-2 System to System Cable (#2425) - 2.5M 16-bit SCSI-2 System to System Cable (#2456) - LC-SC 50 Micron Fiber Converter Cable (#2459) - LC-SC 62.5 Micron Fiber Converter Cable (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell) (#4256) - Extender Cable - USB Keyboards, 2M (#2861) - ARTIC960Hx 4-Port EIA-232 Cable (#2863) - ARTIC960Hx 4-Port X.21 Cable (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable (#2951) - Cable, V.24 / EIA-232 (#2952) - Cable, V.35 (#2953) - Cable, V.36 / EIA-499 (#2954) - Cable, X.21 (#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable (#3124) - Serial to Serial Port Cable for Drawer/Drawer (#3125) - Serial to Serial Port Cable for Rack/Rack (#4353) - H-100 Bus 8-position Cable (#4691) - Rack Status Beacon Cable, Junction Box To Drawer Or Status Beacon (#4692) - Rack Status Beacon Cable, Junction Box Daisy Chain (#3146) - RIO-2 (Remote I/O-2) Cable, 1.2M (#3147) - RIO-2 (Remote I/O-2) Cable, 3.5M (#3148) - RIO-2 (Remote I/O-2) Cable, 10M (#6001) - Power Control Cable (SPCN) - 2 meter (#6006) - Power Control Cable (SPCN) - 3 meter (#6007) - Power Control Cable (SPCN) - 15 meter (#6008) - Power Control Cable (SPCN) - 6 meter DISPLAYS (#3636) - L200P Flat Panel Monitor (#3637) - IBM T541H /L150p 15" TFT Color Monitor (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable (#3639) - IBM ThinkVision L170p Flat Panel Monitor (#3640) - IBM ThinkVision L171p Flat Panel Monitor (#3642) - ThinkVision L191p Flat Panel Monitor KEYBOARDS (#8800) - Quiet Touch Keyboard - USB, Business Black, US English, #103P (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189 (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142 (#8803) - Quiet Touch Keyboard - USB, Business Black, German Austrian, #129 (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English, #166 (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172 (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194 (#8807) - Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275 (#8808) - Quiet Touch Keyboard - USB, Business Black, Canadian French, #058 (#8810) - Quiet Touch Keyboard - USB, Business Black, Belgian Dutch, #120 (#8811) - Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153 (#8812) - Quiet Touch Keyboard - USB, Business Black, Danish, #159 (#8813) - Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442 (#8814) - Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G (#8816) - Quiet Touch Keyboard - USB, Business Black, Norwegian, #155 (#8817) - Quiet Touch Keyboard - USB, Business Black, Dutch, #143 (#8818) - Quiet Touch Keyboard - USB, Business Black, Portuguese, #163 (#8819) - Quiet Touch Keyboard - USB, Business Black, Greek, #319 (#8820) - Quiet Touch Keyboard - USB, Business Black, Hebrew, #212 (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208 (#8823) - Quiet Touch Keyboard - USB, Business Black, Polish, #214 (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245 (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243 (#8827) - Quiet Touch Keyboard - USB, Business Black, Turkish, #179 (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171 (#8830) - Quiet Touch Keyboard - USB, Business Black, Arabic, #238 (#8833) - Quiet Touch Keyboard - USB, Business Black, Korean, #413 (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese #467 (#8835) - Quiet Touch Keyboard - USB, Business Black, French Canadian, #445 (#8836) - Quiet Touch Keyboard - USB, Business Black, Thai, #191 (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443 (#8839) - Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105 (#8840) - Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P MEDIA DEVICES (#2591) - External USB 1.44 MB Diskette Drive LINECORDS (#6451) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #69 (#6452) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #62 (#6453) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #2 (#6454) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #66 (#6455) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #5 (#6456) - Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), Right Angle, Plug Type #5 (Denan marking) (#6459) - Power Cord - Drawer To IBM PDU, 4M, Right Angle (#6461) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #18 (#6462) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #19 (#6463) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #23 (#6464) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #32 (#6465) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #24 (#6466) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #22 (#6467) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #25 (#6468) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #6 (#6470) - Power Cord - United States/Canada (#6471) - Power Cord - Brazil (125V, 15A) (#6472) - Power Cord - Belgium, Finland, France, Indonesia, Korea (250V, 16A) (#6473) - Power Cord - Denmark (250V, 10A) (#6474) - Power Cord - United Kingdom (250V, 13A) (#6475) - Power Cord - Israel (250V, 6-16A) (#6476) - Power Cord - Switzerland (250V, 10A) (#6477) - Power Cord - South Africa/Pakistan (250V, 16A) (#6478) - Power Cord - Italy/Chile (250V, 10A and 16A) (#6479) - Power Cord - Australia/New Zealand/Argentina (250V, 10A) (#6487) - Power Cord - Thailand (250V, 15A) (#6488) - Power Cord - Uruguay (250V, 10A) (#6493) - Power Cord - China (250V,10A) (#6494) - Power Cord --India (250V/10A) (#6495) - Power Cord - Brazil (250V,10A) (#6496) - Power Cord - Korea (250V, 10A) (#6499) - Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #73 (#6651) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75 (#6659) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76 (#6663) - Power Cord (14-foot), To Wall/OEM PDU, (250V, 10A), Right Angle, Plug Type #76 (#6670) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (Denan marking) (#6680) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated (#6681) - Power Cord (14-foot), Drawer to OEM PDU, (250V, 10A), Right Angle, Plug Type #6, Insulated (#6687) - Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #5 (Denan marking) MISCELLANEOUS (#8841) - Mouse - Business Black with Keyboard Attachment Cable RACK RELATED (#4693) - Rack Status Beacon Junction Box (#7311) - Rack Mount I/O Drawer Enclosure, Two Position Feature Descriptions The following is a list of all feature codes in numeric order. Attributes, as defined in the following feature descriptions, state the interaction of requirements among features. Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features. The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities. The order type defines if a feature is orderable only on initial orders, only on MES orders, on both initial and MES orders, or if a feature is supported on a model due to a model conversion. Supported features cannot be ordered on the converted model, only left on or removed from the converted model. (#0986) CCS Customer Service Specify (US) This feature code specifies that the system will receive special request services from the Center for Customized Solutions (CCS). FC 0986 is available only on the initial plant order. Attributes provided: None Attributes required: None For 7311-D11: (#0986) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#1820) PCI-X Dual-port 4x IB HCA The #1820, PCI-X Dual-port 4x InfiniBand Host Channel Adapter, provides attachment to the Topspin Server Switch models 120 and 270. Connection to the Topspin Server Switches are accomplished by using the 4x IB Cables. Attributes provided: 2 ports of 4x IB to attach to the Topspin Server Switch models 120 and 270 Attributes required: Available PCI-X slot For 7311-D11: (#1820) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: AIX 5.3, or later. Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1835) 3 meter 4x IB Cable This 3 meter 4x IB cable is utilized for InfiniBand applications. Attributes provided: 3 meter 4x IB cable Attributes required: 4x IB port For 7311-D11: (#1835) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1836) 8 meter 4x IB Cable This 8 meter 4x IB cable is utilized for InfiniBand applications. Attributes provided: 8 meter 4x IB cable Attributes required: 4x IB port For 7311-D11: (#1836) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#1839) 1.5 meter 4x IB Cable This 1.5 meter 4x IB cable is utilized for InfiniBand applications. Attributes provided: 1.5 meter 4x IB cable Attributes required: 4x IB port For 7311-D11: (#1839) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 differential adapter Attributes required: 1 external SCSI-2 Fast/Wide Port For 7311-D11: (#2114) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M 0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI connector to a 68-pin P style connector. Cable has male Mini-68 pin VHDCI connector on one end and a female 68 pin P style connector on the other. Length = 0.3 meters. Attributes provided: Attachment of supported external sub-system to integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector. Attributes required: None For 7311-D11: (#2118) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2424) 0.6M 16-bit SCSI-2 System to System Cable (No Longer Available as of December 10, 2004) This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system. Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at each end Attributes required: 68-pin SCSI Interface For 7311-D11: (#2424) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2425) 2.5M 16-bit SCSI-2 System to System Cable This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system. Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at each end Attributes required: 68-pin SCSI Interface For 7311-D11: (#2425) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2456) LC-SC 50 Micron Fiber Converter Cable 50 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters. Attributes provided: Attachment to external 50 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector. Attributes required: None For 7311-D11: (#2456) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2459) LC-SC 62.5 Micron Fiber Converter Cable 62.5 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters. Attributes provided: Attachment to external 62.5 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector. Attributes required: None For 7311-D11: (#2459) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2591) External USB 1.44 MB Diskette Drive The externally attached USB diskette drive provides storage capacity up to 1.44 MB on a high density (2HD) floppy disk and 720 KB on a double density floppy disk. Includes 350mm (13.7 in) captured cable with standard USB connector. Limitations: Maximum 1 USB diskette per adapter, Up to 1 Keyboard and Mouse also supported on the adapter with the diskette drive at the same time No system boot capability Not to be operated upside down or with eject button down Characteristics: Capacity - 1.44 MB (2HD disk) or 720 KB (double density disk) Physical Dimensions: Width=103mm (4.05 in), Height=17.6mm (.69 in), Depth=141.8mm (5.58 in) Color: Black Data Rate: 12 Mbits/sec Max Power Consumption: 2.36 Watt (seek) Operates in all positions except those noted in the limitations above Attributes provided: External diskette drive Attributes required: 1 available USB port For 7311-D11: (#2591) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2732) IBM Short-wave Serial HIPPI PCI Adapter for RS/6000 (No Longer Available as of December 10, 2004) The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit PCI adapter supporting TCP/IP over a serial HIPPI link. Data is sent and received over optical fiber at 1.2 Gbps using the HIPPI standard 20/24 bit encoding scheme with short wave optical transducers. The effective maximum data rate of the HIPPI interface is 800 Mbps. Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements. www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: Attachment to HIPPI Network Attributes required: One 32-bit PCI Slot and LPP 5765-E07 For 7311-D11: (#2732) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2737) Keyboard/Mouse Attachment Card - PCI (No Longer Available as of December 10, 2004) This PCI card provides for connection of one USB keyboard and mouse. Attributes provided: USB Keyboard/Mouse Attachment Attributes required: Empty PCI slot For 7311-D11: (#2737) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2738) 2 Port USB PCI Adapter The 2 Port USB PCI Adapter is a USB 2.0 capable adapter that provides for the connection of one USB keyboard and mouse. Limitation: Limited to USB 1.1 support with AIX Attributes provided: USB Keyboard/Mouse Attachment Attributes required: One available PCI slot For 7311-D11: (#2738) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2849) POWER GXT135P Graphics Accelerator with Digital Support The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors. Hardware Description: 128-bit graphics processor 8-bit CLUT or 24-bit true color 16 MB SDRAM 32-bit PCI interface Universal PCI (5.0v or 3.3v) 1 hardware color map Features Supported: Up to approximately 16.7 million colors Rectangular clipping 2 analog monitor outputs at up to 1280 x 1024 resolution 1 analog monitor output at up to 2048 x 1536 resolution 1 digital monitor output at up to 1600 x 1200 resolution 60 to 85 Hz refresh rates (ISO 9241, Part 3) APIs Supported: X-Windows and Motif UMS 2.3.0 (no hardware scaling) Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only) Attributes provided: 2D Graphics Attributes required: 1 PCI slot For 7311-D11: (#2849) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2861) ARTIC960Hx 4-Port EIA-232 Cable Attributes provided: 4-port EIA-232 cable for (#2947) Attributes required: One #2947 adapter For 7311-D11: (#2861) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2863) ARTIC960Hx 4-Port X.21 Cable Attributes provided: 4-port X.21 cable for (#2947) Attributes required: One #2947 adapter For 7311-D11: (#2863) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable Attributes provided: 4-port X.35 (DTE) cable for (#2947) Attributes required: One #2947 adapter For 7311-D11: (#2864) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable This cable provides the capability to interconnect adapters that provide H.100 bus connectors. This 4-position cable should be used when four or less adapters with H.100 connectors will be interconnected. When more than 4 and less than or equal to 8 adapters will be connected, the H.100 Bus 8-Drop Cable (#4353) should be used. Attributes provided: H.100 bus connection between adapters Attributes required: None For 7311-D11: (#2877) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2934) Asynchronous Terminal/Printer Cable EIA-232 The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal interposer) and replaces this method of printer/terminal attachment. This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is is used in conjunction with : FC 2931 (8-port Async Adapter EIA232, ISA bus) FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136) Attributes provided: EIA232 device attachment capability Attributes required: Any RS/6000 Asynchronous port For 7311-D11: (#2934) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2936) Asynchronous Cable EIA-232/V.24 Used to attach a modem to the standard I/O ports with the 10-pin to 25-pin converter cable (#3925), 8-port Cable Assembly, 16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to DB-25 Converter Cable feature #6402) or the 16-Port EIA-232 Remote Async Node (with RJ45 to DB25 Converter Cable feature #8133). The cable is 3 meters (9.8 feet) in length. Attributes provided: Modem attachment to async or serial port Attributes required: Async or serial port For 7311-D11: (#2936) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All eight ports are software programmable to support either EIA-232E or RS-422A protocols, at up to 230K baud. Attributes provided: 8 Async ports Attributes required: One PCI slot For 7311-D11: (#2943) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2944) 128-Port Asynchronous Controller, PCI bus (No Longer Available as of March 31, 2006) The 128-Port Async Adapter subsystem provides attachment for a high concentration of asynchronous lines (up to 128) from a single PCI bus slot. This gives the system the ability to serve a large number of user of EIA-232 or RS-422 devices such as terminals, printers, and modems. Two 2.4 Mbps synchronous channels link the adapter to a maximum of eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to each synchronous channel. RANs can also be used with this adapter. If these RANs are connected the synchronous channel the data rate drops down to 1.2 Mbps. For the best results keep the previous and new RAN's on separate synchronous channels. Attributes provided: Up to 128 Async Ports Attributes required: One PCI slot, One to eight (#8137) or (#8138) For 7311-D11: (#2944) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one-slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of: EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of up 2.0M bps. Software support is provided by ARTIC960 Support for AIX, Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that provide AIXLink X.25 LPP Version 1.1.5 support. Note: This adapter may have AIX 5.1 support limitations. Go to to the following URL to view the latest AIX 5.1 support limitation statements. www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: One to four WAN connections at up to 2.0Mbps Attributes required: One full length 32-bit PCI slot, AIX Version 4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5, 4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support). For 7311-D11: (#2947) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2951) Cable, V.24 / EIA-232 (No Longer Available as of December 30, 2005) V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7311-D11: (#2951) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2952) Cable, V.35 (No Longer Available as of December 30, 2005) V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7311-D11: (#2952) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2953) Cable, V.36 / EIA-499 (No Longer Available as of December 30, 2005) V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7311-D11: (#2953) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2954) Cable, X.21 (No Longer Available as of December 30, 2005) X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7311-D11: (#2954) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2962) 2-Port Multiprotocol PCI Adapter (No Longer Available as of December 30, 2005) This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems. This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926). 2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with: X.21 DCE - Using 2-Port Cable, X.21 (#2954) CCITT X.21 Signalling CCITT V.11 Electrical CCITT X.27 Electrical EIA-422-A Electrical ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951) CCITT V.24 Signalling CCITT V.28 Electrical CCITT X.21bis Electrical and Signalling EIA-232-C Electrical and Signalling ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable V.35 DCE - Using 2-Port Cable, V.35 (#2952) CCITT V.35 Some signals for signalling CCITT V.28 Some signals for electrical and signalling ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable   V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953) CCITT V.10 Electrical CCITT V.11 Electrical Attributes provided: Two high speed WAN connections Attributes required: One PCI slot For 7311-D11: (#2962) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3124) Serial to Serial Port Cable for Drawer/Drawer This 3.7 meter cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted within the same rack. The cable provides a DB25 female connector at each end. Attributes provided: None Attributes required: None For 7311-D11: (#3124) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3125) Serial to Serial Port Cable for Rack/Rack This 8 meter cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted in separate racks. The cable provides a DB25 female connector at each end. Attributes provided: None Attributes required: None For 7311-D11: (#3125) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3146) RIO-2 (Remote I/O-2) Cable, 1.2M This 1.2-meter RIO-2 (Remote I/O-2) cable connects two RIO-2 based I/O planars within an I/O drawer. Attributes provided: 1.2M RIO-2 Cable Attributes required: I/O Drawer and two RIO-2 I/O planars For 7311-D11: (#3146) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3147) RIO-2 (Remote I/O-2) Cable, 3.5M This 3 1/2 meter RIO-2 (Remote I/O-2)cable is available to connect the processor complex and the I/O drawers. It can also be utilized to connect I/O drawers mounted in separate racks. Attributes provided: Interconnection of CEC and I/O drawers Attributes required: None For 7311-D11: (#3147) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3148) RIO-2 (Remote I/O-2) Cable, 10M This 10 meter RIO-2 (Remote I/O-2) cable is available to connect the processor complex and the I/O drawers. It can also be utilized to connect I/O drawers mounted in separate racks. Attributes provided: Interconnection of CEC and I/O drawers Attributes required: None For 7311-D11: (#3148) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3636) L200P Flat Panel Monitor The L200p flat-panel monitor has the following general characteristics: Business black color 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm (20.1 inches) measured diagonally, incorporating a 0.255 mm pixel pitch/type for bright, high-definition images. Designed to provide flicker free operation at a maximum resolution of 1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in digital mode. Tilt/swivel stand Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7311-D11: (#3636) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: None Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#3637) IBM T541H /L150p 15" TFT Color Monitor Both the T541H and L150p monitors have the following general characteristics: Business Black color 15-inch TFT LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297 mm pixel pitch/type for bright, high-definition images. Designed to provide flicker free operation at a maximum resolution of 1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in digital mode. Tilt/swivel stand Supports 2D Graphics Adapters only Attributes provided: Color Flat-panel Monitor Attributes required: 2D Graphics Adapter For 7311-D11: (#3637) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3638) IBM C220p 21-inch Color Monitor, Business Black, and Cable (No Longer Available as of June 24, 2005) The IBM C220p monitor has the following general characteristics: Business black color 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508 mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel pitch for bright, high-definition images. Designed to provide reduced flicker operation at an optimum and maximum supported addressability of 1600 x 1200 pels at up to 85 Hz (Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa). Tilt/swivel stand Dual input allows attachment to two systems concurrently. Depth: 483.6 mm (19.0 in.) Height: 516.4 mm (20.3 in.) Width: 512.8 mm (20.2 in.) Weight: 30.5 kg (67.2 lbs.) Attributes provided: Color Monitor Attributes required: Graphics Adapter For 7311-D11: (#3638) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: None Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#3639) IBM ThinkVision L170p Flat Panel Monitor (No Longer Available as of September 30, 2005) The IBM ThinkVision L170p LCD flat-panel monitor has the following general characteristics: Business black color 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 400.0 mm (15.7 in.) Weight: 5.7 kg (12.6 lbs.) Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees Contrast ratio: 500:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7311-D11: (#3639) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: None Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#3640) - IBM ThinkVision L171p Flat Panel Monitor The IBM ThinkVision L171p LCD flat-panel monitor has the following general characteristics: Business black color 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.280mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 400.0 mm (15.7 in.) Weight: 5.7 kg (12.6 lbs.) Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees Contrast ratio: 500:1 (minimal) 700:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7311-D11: (#3640) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: None Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#3642) - ThinkVision L191P Flat Panel Monitor The ThinkVision L191p LCD flat-panel monitor has the following general characteristics: Business black color 19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 408.0 mm (16.1 in.) Weight: 7.1 kg (15.7 lbs.) Contrast ratio: 1000:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7311-D11: (#3642) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: None Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell) This cable is required to connect displays with a 15-pin "D" shell connector to the appropriate accelerator connector when it is farther away than the attached monitor cable can reach. Rack mounted systems are likely candidates for this extender cable. Attributes provided: 6-foot extension cable Attributes required: Supported monitor and adapter with a 15-pin "D" shell connector. For 7311-D11: (#4242) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4256) Extender Cable - USB Keyboards, 2M This feature provides a 2M extension cable for use with USB keyboards. Attributes provided: 2M Extension Cable Attributes required: USB Keyboard For 7311-D11: (#4256) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4353) H-100 Bus 8-position Cable (No Longer Available as of December 10, 2004) This cable provides the capability to interconnect adapters that provide H.100 bus connectors. This 8-position cable should be used when more than four and less than or equal to eight adapters with H.100 connectors will be interconnected. If four or less adapters are interconnected, the H.100 Bus 4-Drop Cable (#2877) should be used. Attributes provided: H.100 bus connection between adapters Attributes required: None For 7311-D11: (#4353) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4651) Rack Indicator, Rack #1 This indicator is used to specify the first rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the first rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4651) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4652) Rack Indicator, Rack #2 This indicator is used to specify the second rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the second rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4652) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4653) Rack Indicator, Rack #3 This indicator is used to specify the third rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the third rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4653) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4654) Rack Indicator, Rack #4 This indicator is used to specify the fourth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the fourth rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4654) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4655) Rack Indicator, Rack #5 This indicator is used to specify the fifth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the fifth rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4655) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4656) Rack Indicator, Rack #6 This indicator is used to specify the sixth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the sixth rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4656) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4657) Rack Indicator, Rack #7 This indicator is used to specify the seventh rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the seventh rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4657) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4658) Rack Indicator, Rack #8 This indicator is used to specify the eighth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the eighth rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4658) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4659) Rack Indicator, Rack #9 This indicator is used to specify the ninth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the ninth rack of a multi rack complex. Attributes provided: Rack specify Attributes required: Rack For 7311-D11: (#4659) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4691) Rack Status Beacon Cable, Junction Box To Drawer or Status Beacon (No Longer Available as of November 18, 2005) This cable can be used to connect the Rack Status Beacon Junction Box to a supported rack drawer or to the Rack Status Beacon. Attributes provided: Connection between Rack Status Beacon components Attributes required: None For 7311-D11: (#4691) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4692) Rack Status Beacon Cable, Junction Box Daisy Chain (No Longer Available as of November 18, 2005) This cable is used to connect two Rack Status Beacon Junction Boxes (#4693) together. Multiple Junction Boxes may be linked in series, as required. Attributes provided: Connection between (#4693) Junction Boxes Attributes required: Two or more (#4693) Junction Boxes For 7311-D11: (#4692) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4693) Rack Status Beacon Junction Box (No Longer Available as of November 18, 2005) This feature provides six input connectors and one output connector for racks configured with the Rack Status Beacon (#4690). Multiple Junction Boxes can be linked together in series with Daisy Chain Cable #4692. Attributes provided: Connection of multiple drawers to a single Rack Status Beacon (#4690). Attributes required: Feature #4690 and two or more #4691 cables. For 7311-D11: (#4693) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter (No Longer Available as of March 31, 2006) The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155 Mbps full-duplex connection using permanent virtual circuits (PVC) or switched virtual circuits (SVC) and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN. This 155 Mbps PCI MMF ATM Adapter is compatible with: IBM 8285 ATM Workgroup Switch IBM 8260 ATM Subsystem IBM 8282 ATM Concentrator IBM 8281 ATM LAN Bridge Attributes provided: One ATM 155Mbps MMF connection Attributes required: One PCI slot For 7311-D11: (#4957) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4959) IBM Token-Ring PCI Adapter (No Longer Available as of March 31, 2006) The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short, 32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half-duplex or full-duplex. Automatic Ring-Speed selection prevents "wrong speed" insertion into the ring, even when connected to speed-sensing hubs. This adapter will operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45 connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin D-shell connectors. The Token-Ring PCI Adapter will provide network boot capability. Attributes provided: Attributes required: A single empty 32-bit PCI adapter slot. For 7311-D11: (#4959) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4961) IBM Universal 4-Port 10/100 Ethernet Adapter (No Longer Available as of December 10, 2004) IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long, 64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10 Base-T or 100 Base-T interfaces either half or full duplex. Each port is provided with it's own RJ-45 connector for attachment to standard CAT-3/5 Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u compatible and provides full auto-negotiation for detecting speed and duplex capability across each port. Network boot capability and Network Install Manager (NIM) capability are available using this adapter if no specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) should be considered where maximum port density is required per I/O card slot. But, for high end systems, where card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions. Below are some performance factors to consider when choosing the right adapter for your needs. These performance comparisons are based on all four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) being active. With all four ports under full bandwidth conditions, a single IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver up to 3 times the comparable performance of a single IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968). Under most conditions, each port of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to perform at greater than 50% the throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968). Note: The resulting performance in your environment compared to the above may vary and depends upon the RS/6000 model, the I/O configuration, and associated workload of your applications. Attributes provided: 4 ports of 10/100 Base-Tx Ethernet Attributes required: 1 PCI slot For 7311-D11: (#4961) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4962) 10/100 Mbps Ethernet PCI Adapter II (No Longer Available as of March 31, 2006) The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports: Half / Full Duplex 10/100 Mbps Ethernet interface 10/100 Mbps data rates Auto-negotiation for 10/100 speed and half/full duplex Network boot capability and Network Install Manager (NIM) IEEE 802.3 Ethernet Specification IEEE 802.3u Fast Ethernet Specification After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This support is provided with AIX 5.1 (with appropriate software updates)and later software. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. If you are running with AIX 5.1, to invoke the IP Security function on the adapter, you must obtain AIX 5.1 software updates IY27069 and IY26514 or the 5100-02 Recommended Maintenance package. These updates can be obtained by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD (LCD4-1103-03) dated 4/2002 or later. Note: This IP Security function is not supported with AIX 4.3 software. An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software. Attributes provided: One 10/100 Mbps Ethernet port (connector) Attributes required: One PCI slot For 7311-D11: (#4962) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5001) Customer Service Specify This feature code specifies that the system will receive special request services from the Customer Solution Center (CSC). Attributes provided: Customization Attributes required: None For 7311-D11: (#5001) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#5700) IBM Gigabit Ethernet-SX PCI-X Adapter The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connection with throughput on a standard shortwave multimode optical cable which conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot. Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required. Limitation: Half Duplex (HDX) mode is not supported. Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 7311-D11: (#5700) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. Note: For optimum performance, adapter should be placed in a 64 bit PCI-X card slot. Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode. Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 7311-D11: (#5701) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses. To increase the data writing performance, a 40 MByte non-volitile fast-write cache is provided as a resident part of this adapter. The 40 MByte fast-write cache can provide a significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or external ports) are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrety. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following http://techsupport.services.ibm.com/server/mdownload/ Two industry-standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI RAID Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate configured as either a non-array or an array of disks Also the two external ports provide non-array connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. Limitations: The two external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only non-array configuration support. The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal and external SCSI devices Attributes required: One PCI or PCI-X bus slot For 7311-D11: (#5703) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.1 or later, AIX 5.2 or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode. Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 7311-D11: (#5706) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.1 or later, AIX 5.2 or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required. Limitation: Half Duplex (HDX) mode is not supported. Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 7311-D11: (#5707) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.1 or later, AIX 5.2 or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5712) PCI-X Dual Channel Ultra320 SCSI Adapter (No Longer Available as of March 31, 2006) The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.), up to twice the maximum data transfer rate of the previous Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. Two industry-standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate. The two external ports also provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also the two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or RS/6000 systems. The adapter also supports target mode. Limitations: The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices Attributes required: One available 3.3 volt PCI or PCI-X slot For 7311-D11: (#5712) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.1 or later, AIX 5.2 or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5716) 2 Gigabit Fibre Channel PCI-X Adapter The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gps or 2 Gps data rates. save2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required. Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required order Feature Code #6239-2 Gigabit Fibre Channel PCI-X Adapter Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices. http://www.storage.ibm.com/hardsoft/disk/products.htm Consult with your IBM representative or Business Partner for additional information relative to any third party attachment. Attributes provided: 1 Fibre Channel/FC-AL interface Attributes required: 1 empty PCI or PCI-X slot For 7311-D11: (#5716) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5718) 10 Gigabit Ethernet-SR PCI-X Adapter Provides 10 Gigabit Ethernet PCI-X based server connections. Supports distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um multimode fiber with 2000MHz km minimum model bandwith at 850 nm. Adapter connector type is LC. Attributes provided: Provides highend bandwith for networking Attributes required: Supported on PCI-X slots only For 7311-D11: (#5718) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter Offers 10 Gigabit Ethernet PCI-X based server connections over a maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um single-mode fiber optic cables and uses a SC connector type for connecting into net-work infrastructure components like 10 Gigabit Ethernet switch/router with SC connectors. Attributes provided: 10 Gigabit Ethernet connections Attributes required: Available PCI-X slot For 7311-D11: (#5719) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: AIX V5.2 or higher. For Linux information, refer to the following Web site: http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5723) 2 Port Asynchronous EIA-232 PCI Adapter Connection for 2 Asynchronous EIA-232 devices. Ports are Programmable to support EIA-232 protocols, at a line speed of 128K bps. Attributes provided: 2 Asynchronous Ports Attributes required: One PCI Slot For 7311-D11: (#5723) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6 ) OS level required: AIX V5.2 or higher. For Linux information, refer to the following Web site: http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5736) - PCI-X DDR Dual Channel Ultra320 SCSI Adapter The PCI-X Dual Channel Ultra320 SCSI Adapter (#5736) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X DDR Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. Two VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter. The two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/Web pages for verification of connectivity support with this adapter. The PCI-X DDR Dual Channel Ultra320 SCSI Adapter (#5736) is a native boot adapter with AIX 5.3L or AIX 5.3D software in a supported pSeries or RS/6000 systems. The adapter also supports target mode. Limitations: Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. To obtain microcode update go to the following Web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices Attributes required: One available 3.3 volt PCI or PCI-X slot or PCI-X 2.0 DDR slot. For 7311-D11: (#5736) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later. SUSE LINUX Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS for POWER Version 4, or later. Linux - Refer to the following URL for systems and features that operate with Linux: http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6001) Power Control Cable (SPCN) 2 meter This feature provides a two-meter power control cable. Attributes provided: 2M power control cable Attributes required: I/O drawer For 7311-D11: (#6001) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6006) Power Control Cable (SPCN) 3 meter This feature provides a three-meter power control cable. Attributes provided: 3M power control cable. Attributes required: two drawers in the same rack. For 7311-D11: (#6006) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6007) Power Control Cable (SPCN) 15 meter This feature provides a fifteen-meter power control cable. Attributes provided: 15M power control cable. Attributes required: I/O drawer For 7311-D11: (#6007) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6008) Power Control Cable (SPCN) 6 meter This feature provides a six-meter power control cable. Attributes provided: 6M power control cable Attributes required: I/O drawer For 7311-D11: (#6008) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6204) PCI Universal Differential Ultra SCSI Adapter (No Longer Available as of December 30, 2005) The PCI Universal Differential Ultra SCSI Adapter is the latest technology advancement of an RS/6000 SCSI-2 differential adapter with a maximum data transfer rates of 40 MBytes per second. This adapter has the capability to be plugged into the newer +3.3 volt PCI slots as well as the older +5 volt PCI slots. Feature code # 6204 allows connection to external differential SCSI-2 F/W or Ultra SCSI type devices up to 25 meters away. Feature code # 6204 will negotiate with each external device and transfer data at the fastest SCSI data transfer rate capable by the external device. Check system sales pages as to which external differential subsystems are supported. The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry-standard 68-pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048). Attributes provided: 15 external SCSI-2 addresses Attributes required: 1 PCI slot. For 7311-D11: (#6204) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6230) Advanced SerialRAID Plus Adapter (No Longer Available as of December 10, 2004) The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop) Serial Storage Architecture (SSA) adapter providing an instantaneous data transfer rate of up to 160 MByte/s per loop. It also provides eight-initiator, non-RAID capability, two-initiator RAID 1, two-initiator RAID 0 + 1, two-initiator RAID 5, or one-initiator RAID 0 capability. The adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that improves write performance in RAID 0+1, RAID 5, and non-RAID applications. When the 32 MByte Fast-Write Cache Option Card is used, the adapter can be configured in either single or dual initiator fast- write cache mode. In dual initiator fast-write cache mode, if one of the two adapters fail, the failing adapter is designed to transfer control over to the other. Also, in dual initiator Fast Write Cache mode, the 128 MByte DRAM Option Card (#6231) is available and required to utilize the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte DRAM Option Card is not used in dual initiator fast-write cache mode, the effective fast-write cache capacity will be 16 MBytes on each adapter. See the 128 MByte DRAM Option Card (#6231) for information. The Advanced SerialRAID Plus Adapter when operated in a RAID 5 configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. When operated in a RAID 1 or RAID 0+1 configuration, will support up to eight disk drives mirrored. The adapter also supports Hot Spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter also supports connectivity to external disk enclosures and internal RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also supported (Refer to IBM 7133 Sales literature for additional information) Any supported RS/6000 system can be set up to boot from an Advanced SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included as part of the configuration. Other disks associated with the adapter can be RAID but at least one disk must be a non-RAID SSA disk. The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. If your system is running with AIX 4.3.3 or later software, native boot capability is supported. For factory system orders with AIX preload requested, an internal SCSI disk drive will be preloaded as the native boot disk even if internal SSA disk drive(s) are present. If your system is running with AIX 4.2.1 or AIX 4.3.2 software, the below procedure applies in order to boot using the Advanced SerialRAID Plus Adapter: The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. A supported AIX version of software (with proper updates) must be loaded to the non-RAID SSA disk using AIX's Network Install Manager (NIM) before booting from the non-RAID disk. The system with a non-RAID SSA disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation. Once AIX with updates is installed on the non-RAID SSA disk and the system is configured for booting, booting will take place from the boot disk without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time. After October 3, 2000, a 3-Way Copy Function will be available. This 3-Way Copy Function allows a user to create a third copy to an existing RAID-1 or RAID 0+1 array while mirrored operation continues. 3-Way Copy allows the user, at any time after the copy process has completed, to split the third copy off from the original RAID-1 or RAID 0+1 array to form an independent RAID copy. This third copy or "snapshot" copy could be typically used to perform a backup or to test some new application. The 3-Way Copy Function is available only via a code download and can only be gained by going to the SSA web support pages defined below. When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems. These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system. http://www.storage.ibm.com/hardsoft/products/ssa/ The above link contains links to SSA publications and other SSA Web sites, including the one below. http://www.storage.ibm.com/hardsoft/products/ssa/rs6k/index.html The above link contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments. Limitation: Internal ports on the adapter are not supported. See machine/model specific information to determine if internal SSA disk drives and associated hardware/cables are supported. Attributes provided: Attachment of SSA devices Attributes required: One PCI bus slot For 7311-D11: (#6230) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6231) 128 MByte DRAM Option Card (No Longer Available as of December 10, 2004) The 128 MByte DRAM Option Card (#6231) is a field only optional feature to the Advanced SerialRAID Adapter (#6225) or a factory or field option for the Advanced SerialRAID Plus Adapter (#6230). This option is recommended for dual initiator fail-over Fast Write Cache (FWC) configurations. The option increases the existing DRAM on the adapter to 128 MBytes. In this type of dual initiator FWC configuation, the existing DRAM does not have enough capacity to completely contain a copy of each adapter's 32 MByte FWC and also provide additional working space. The 128 MByte DRAM Option Card provides this additional space needed to contain a full copy of each adapters 32 MByte FWC content and allows for full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card (#6231) is not used with dual-initiator FWC configurations, the effective FWC capacity is reduced to 16 MBytes per adapter. If this feature is ordered as a field upgrade to an existing SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software and publications are also provided. Attributes provided: 128 MByte DRAM memory Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card (#6235) is also recommended. For 7311-D11: (#6231) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6235) 32 MByte Fast-Write Cache Option Card (No Longer Available as of December 10, 2004) The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast-write optional feature that plugs into the IBM RS/6000 Advanced SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus (#6230). It utilizes non-volatile RAM. During the unlikely event of an Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter insuring data integrity. The 32 MByte Fast-Write Cache Option Card can provide a significant improvement of data throughput and response time during certain sequence write operations compared to SSA RAID adapters without the fast-write cache. The response time and data transfer improvement using the optional card will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (# 6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single-initiator or dual initiator configurations. Attributes provided: None Attributes required: One Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230). For 7311-D11: (#6235) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6276) AC Power Supply, 288W This feature provides one 288 watt power supply for an I/O drawer. Attributes provided: One AC power supply Attributes required: AC power specify #9172 For 7311-D11: (#6276) Minimum required: 2 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#6438) RIO-2 Remote I/O Loop Adapter This feature provides two RIO-2 Remote I/O ports for attaching the I/O drawer to a server. Up to four I/O drawers can be included in a single loop. Attributes provided: Two RIO-2 Remote I/O ports Attributes required: None For 7311-D11: (#6438) Minimum required: 1 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#6451) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #69 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #69 (IS 6538). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6451 power cord to power the system and/or peripheral features requiring a power cord: India. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6451) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6452) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #62 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #62 (GB 1053). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6452 power cord to power the system and/or peripheral features requiring a power cord: People's Republic of China. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6452) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6453) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #2 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #2 (IRAM 2073). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6453 power cord to power the system and/or peripheral features requiring a power cord: Argentina, Paraguay, Uruguay. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6453) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6454) Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #66 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #66 (KETI). Refer to Corporate Bulletin C-B- 2-4700-009 for a description of plug types. The following countries/regions use the #6454 power cord to power the system and/or peripheral features requiring a power cord: North Korea, South Korea. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6454) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6455) Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #5 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6455 power cord to power the system and/or peripheral features requiring a power cord: United States, Anguilla, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Bonnaire, Caicos Is., Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatamala, Haiti, Honduras, Jamaica, Japan, Micronesia, Montserrat, Netherlands Antilles, Nicaragua, Panama, Peru, Phillipines, St. Maarten NA, Taiwan, Tortola (BVI), Thailand, Venezuela. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6455) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6456) Power Cord (14-foot), Drawer to OEM PDU, (250V, 15A), Right Angle, Plug Type #5 (Denan marking) This power cord goes from the system or I/O drawer to the rack power distribution unit. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 14-foot length. Right angle. This power cord meets the Denan marking requirement in Japan. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6456) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6459) Power Cord -- Drawer To IBM PDU, 4M, Right Angle This feature provides a power cord for connecting an I/O drawer to an IBM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6459) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6461) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #18 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #18 (CEE 7 VII). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6461 power cord to power the system and/or peripheral features requiring a power cord: Afghanistan, Albania, Algeria, Andorra, Angola, Armenia, Austria, Belarus, Belgium, Benin, Bosnia/Herzegovina, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo, Croatia, Czech Republic, Dahomey, Djibuouti, Egypt, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Finland, France, French Polynesia, French Guiana, Gabon, Georgia, Germany, Greece, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland, Indonesia, Iran, Ivory Coast, Kazakhstan, Krygystan, Laos, Latvia, Lebanon, Lithuania, Luxembourg, Macau, Macedonia, Mali, Martinique, Mauritania, Mauritius, Mayotte, Moldova, Monaco, Mongolia, Morocco, Mozambique, Netherlands, New Caledonia, Niger, North Korea (C19 only), Norway, Poland, Portugal, Principe, Reunion, Romania, Russia, Rwanda, St. Thomas, Saudi Arabia, Senegal, Serbia, Slovenia, Somalia, South Korea (C19 only), Spain, Suriname, Sweden, Syria, Tahiti, Tajikistan, Togo, Tunisia, Turkey, Turkmenistan, Ukraine, Upper Volta, Uzbekistan, Vanuatu, Vietnam, Wallis & Futuna, Zaire, Zimbabwe. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6461) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6462) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #19 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #19 (CEE). Refer to Corporate Bulletin C-B- 2-4700-009 for a description of plug types. The following countries/regions use the #6462 power cord to power the system and/or peripheral features requiring a power cord: Denmark. Attributes provided: Power Cord Attributes required: None. For 7311-D11: (#6462) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6463) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #23 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #23 (BS 1364A). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6463 power cord to power the system and/or peripheral features requiring a power cord: Abu Dhabi, Bahrain, Botswana, Brunei, Channel Islands, Cyprus, Dominica, Gambia, Ghana, Grenada, Grenadines, Guyana, Hong Kong, Iraq, Ireland, Jordan, Kenya, Kuwait, Liberia, Malawi, Malaysia, Malta, Myanmar, Nigeria, Oman, Qatar, Sierra Leone, Singapore, St. Kitts & Nevis, St. Lucia, Seychelles, Sudan, Tanzania, Trinidad & Tobago, United Arab Emirates, United Kingdom, Yemen, Zambia. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6463) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6464) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #32 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #32 (SII 32-1971). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6464 power cord to power the system and/or peripheral features requiring a power cord: Israel. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6464) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6465) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #24 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #24 (SEV 24507). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6465 power cord to power the system and/or peripheral features requiring a power cord: Lichtenstein, Switzerland. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6465) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6466) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #22 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #22 (SABS 164). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6466 power cord to power the system and/or peripheral features requiring a power cord: Bangladesh, Lesotho, Maldives, Namibia, Nepal, Pakistan, Samoa, South Africa, Sri Lanka, Swaziland, Uganda. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6466) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6467) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #25 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #25 (CEI 23-16). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6467 power cord to power the system and/or peripheral features requiring a power cord: Chile, Italy, Libya. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6467) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6468) Power Cord -- Drawer To OEM PDU, 4M, Right Angle, Plug Type #6 (No Longer Available as of March 31, 2005) This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #6 (AS 3112-1964 NZS 198). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6468 power cord to power the system and/or peripheral features requiring a power cord: Australia, Fiji, Kiribati, Nauru, New Zealand, Papua New Guinea, Western Samoa. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6468) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6470) Power Cord - United States/Canada The following countries use the #6470 power cord to power the system unit and/or peripheral features requiring a power cord. DOM U.S. 649 CANADA 832 SAUDI ARABIA 619 BAHAMAS 621 BARBADOS 627 BERMUDA 629 BOLIVIA 631 BRAZIL 661 COLOMBIA 663 COSTA RICA 681 DOMINICAN REPUBLIC 683 ECUADOR 829 EL SALVADOR 731 GUATEMALA 640 GUYANA 735 HONDURAS 759 JAMAICA 781 MEXICO 791 NETHERLANDS ANTILLES 811 PANAMA 843 SURINAM 859 TRINIDAD 871 VENEZUELA 760 JAPAN 761 JAPAN (PDS) 766 KOREA 818 PHILIPPINES 858 TAIWAN Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6470) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6471) Power Cord - Brazil (125V, 15A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6471) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6472) Power Cord - Belgium, Finland, France, Indonesia, Korea (250V, 16A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6472) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6473) Power Cord - Denmark (250V, 10A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6473) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6474) Power Cord - United Kingdom (250V, 13A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6474) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6475) Power Cord - Israel (250V, 6-16A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6475) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6476) Power Cord - Switzerland (250V, 10A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6476) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6477) Power Cord - South Africa/Pakistan (250V, 16A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6477) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6478) Power Cord - Italy/Chile (250V, 10A and 16A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6478) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6479) Power Cord - Australia/New Zealand/Argentina (250V, 10A) (No Longer Available as of March 31, 2005) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6479) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6487) Power Cord - Thailand (250V, 15A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6487) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6488) Power Cord - Uruguay (250V, 10A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6488) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6493) Power Cord - China (250V,10A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6493) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6494) Power Cord --India (250V/10A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6494) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6495) Power Cord - Brazil (250V,10A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6495) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6496) Power Cord - Korea (250V, 10A) Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6496) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6499) Power Cord - Drawer To OEM PDU, 4M, Right Angle, Plug Type #73 This feature provides a power cord for connecting an I/O drawer to an OEM PDU within a rack. The power connector to the drawer is at a 90 degree angle to the power cord. Plug type #73 (UNIAO Certificad Ora). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6499 power cord to power the system and/or peripheral features requiring a power cord: Brazil. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6499) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6582) Planar Board, 6 PCI-X Slots This feature provides six PCI-X slots for an I/O drawer. Attributes provided: Six PCI-X slots Attributes required: None For 7311-D11: (#6582) Minimum required: 1 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#6583) Air Blower This feature provides an air blower to cool components in a drawer. Attributes provided: Air blower Attributes required: None For 7311-D11: (#6583) Minimum required: 1 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#6651) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #75 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6651 power cord to power the system and/or peripheral features requiring a power cord: Taiwan Attributes provided: Power cord Attributes required: None For 7311-D11: (#6651) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6659) Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #76 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6659 power cord to power the system and/or peripheral features requiring a power cord: Taiwan Attributes provided: Power cord Attributes required: None For 7311-D11: (#6659) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6663) Power Cord (14-foot), To Wall/OEM PDU, (250V, 10A), Right Angle, Plug Type #76 This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #76 (KETI), right angle. Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6663 power cord to power the system and/or peripheral features requiring a power cord: Taiwan Attributes provided: Power cord Attributes required: None For 7311-D11: (#6663) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6670) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (Denan marking) This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #59 (NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. This power cord meets the Denan marking requirement in Japan. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6670) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6680) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated This insulated power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6479 power cord to power the system and/or peripheral features requiring a power cord: Australia, Fiji Islands, Kiribati, Nauru, New Zealand, Papua New Guinea, W. Samoa. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6680) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6681) Power Cord (14-foot), Drawer to OEM PDU, (250V, 10A), Right Angle, Plug Type #6, Insulated This power cord goes from the system or I/O drawer to the rack power distribution unit. Plug type #6 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 14-foot length. Right angle. Insulated. Attributes provided: Power Cord Attributes required: None For 7311-D11: (#6681) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6687) Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #5 (Denan marking) This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. This power cord meets the Denan marking requirement in Japan. Attributes provided: Power cord Attributes required: None For 7311-D11: (#6687) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#7311) Rack Mount I/O Drawer Enclosure, Two Position The #7311 enclosure provides the mounting hardware required to install a 7311-D10 or 7311-D11 I/O drawer in a 7014-T00 or T42 rack. The enclosure can accommodate two 7311 I/O drawers, side by side, but it may also be used with only one 7311 I/O drawer installed. Attributes provided: Rack mounting for two 7311 I/O drawers Attributes required: 4U of rack space For 7311-D11: (#7311) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Each 7311-D11 I/O drawer must be installed in a #7311 enclosure. The enclosure can hold either one or two I/O drawers, side by side. (#7862) PCI Blind Swap Cassette Kit, Single Wide Adapters, Type II This feature contains a blind swap cassette for single slot width PCI adapters. It also includes the necessary hardware to adapt the cassette to mount various sizes of PCI cards. Attributes provided: Blind swap PCI cassette Attributes required: PCI card and empty PCI adapter location For 7311-D11: (#7862) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter This cable provides attachment between the 128-port Asynchronous Controller and the first RAN in a daisy chain, or attachment between RANs in the daisy chain. Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain. For 7311-D11: (#8131) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch) This cable may be substituted for the 4.5 meter (15 foot) async controller cable whenever a customer configuration requires stacked Remote Async Nodes. Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain. For 7311-D11: (#8132) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8133) RJ-45 to DB-25 Converter Cable This cable can be used to attach EIA-232 devices to the 16 port EIA 232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async subsystem. This cable provides a 25-pin D shell connector for device attachment. Four cables are provided per each order. Attributes provided: 4 DB-25 EIA-232 ports Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136) For 7311-D11: (#8133) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (No Longer Available as of March 31, 2006) The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a modified version of the existing 16-port Remote Async Node (feature #8130 or 8134) in an industry-standard 19-inch rack mount chassis to allow simpler installation and ease-of-use. Like the existing RAN, it can also be configured as a desktop device. As an additional benefit, the metal chassis meets FCC Class B/CISPR B when used with similarly rated RS/6000 host to meet the needs of customers with these requirements. The RANs provide 16 ports of EIA-232 capability with full modem controls on each port and are connected to the 128-port Async Controller (Micro Channel or ISA versions) residing in the host. RANs are connected in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either version). The rack-mountable RAN offers these enhanced features: Industry-standard 19-inch rack mountable chassis (can be configured for stacking on a desktop or mounted in a 19-inch rack). Meets FCC Class B/CISPR B when used with similarly rated RS/6000 host. All RJ-45 connectors are now on the front panel, greatly enhancing cable management. The DB-15 synchronous connectors (cabling from host to RAN and between RANs) and the power cord and switch are located on the rear panel. Power supply is self contained within the unit. The rack-mountable RAN offers these same features as the existing RAN product: Identical function and support as existing 16-port Remote Async Node (RAN), feature #8130 or 8134. Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel or ISA host adapter. Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel. Built-in diagnostics can test ports independent of RS/6000 host. Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI. The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes. Individual ports support a maximum EIA-232 distance of 62 meters (200 feet). Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer-supplied cables. Location of RAN up to 330 meters from the host using standard shielded 8-wire twisted pair cabling. Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host. Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN connection Attributes required: 1 RAN-to-128-port Controller connection OR 1 RAN-to-RAN connection For 7311-D11: (#8136) Minimum required: 0 Maximum allowed: 48 (Initial order maximum: 48) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232 (No Longer Available as of March 31, 2006) Provides remote connection of up to 16 EIA-232 devices to a 128-Port Asynchronous Controller. Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate. Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel, ISA or PCI host adapter. Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel. Built-in diagnostics can test ports independent of RS/6000 host. Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI. The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes. Individual ports support a maximum EIA-232 distance of up to 31 meters (100 feet), depending on the baud rate. Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables. Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps) from host using standard shielded 8-wire twisted pair cabling. Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host. Attributes provided: 16 EIA-232 Async ports Attributes required: One 128-port adapter per eight (#8137s) For 7311-D11: (#8137) Minimum required: 0 Maximum allowed: 48 (Initial order maximum: 48) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8453) - Customer Specified Placement , Initial Order Only This offering allows the customer to order a new initial p5-570 with the 7311-D11 or 7311-D20 as part of the system and have the ability to place the hardware within the CEC and the 7311 I/O drawers. The customer can designate the slot in drawer placement through the process described in the following Web site: http://www-1.ibm.com/servers/eserver/power/csp/ Attributes provided: Designates the IBM manufacturing will ship the system to the customer with the hardware placed within the 7311-D11 and 7311-D20 drawer to the customers specifications. Attributes required: The 7311 order has to be part of a p5-570 system order that has requested Customer Specified Placement (0453 FC). The 8453 FC is not available on stand alone orders for the 7311. See the following website for process to follow: http://www-1.ibm.com/servers/eserver/power/csp/ For 7311-D11: (#8453) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1 ) OS level required: NA Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P This feature provides a USB attached US English #103P keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8800) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8801) Quiet Touch Keyboard - USB, Business Black, French, #189 This feature provides a USB attached French #189 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8801) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142 This feature provides a USB attached Italian #142 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8802) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8803) Quiet Touch Keyboard - USB, Business Black, German Austrian, #129 This feature provides a USB attached German/Austrian #129 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8803) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166 This feature provides a USB attached UK English #166 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8804) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172 This feature provides a USB attached Spanish #172 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8805) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194 This feature provides a USB attached Japanese #194 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8806) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275 This feature provides a USB attached Brazilian Portuguese #275 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8807) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8808) Quiet Touch Keyboard - USB, Business Black, Canadian French, #058 This feature provides a USB attached Canadian French #058 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8808) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8810) Quiet Touch Keyboard - USB, Business Black, Belgian Dutch, #120 This feature provides a USB attached Belgian/Dutch #120 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8810) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8811) Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153 This feature provides a USB attached Swedish/Finnish #153 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8811) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8812) Quiet Touch Keyboard - USB, Business Black, Danish, #159 This feature provides a USB attached Danish #159 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8812) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8813) Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442 This feature provides a USB attached Bulgarian #442 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8813) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8814) Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G This feature provides a USB attached Swiss/French/German #150F/G keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8814) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8816) Quiet Touch Keyboard - USB, Business Black, Norwegian, #155 This feature provides a USB attached Norwegian #155 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8816) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8817) Quiet Touch Keyboard - USB, Business Black, Dutch, #143 This feature provides a USB attached Dutch #143 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8817) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8818) Quiet Touch Keyboard - USB, Business Black, Portuguese, #163 This feature provides a USB attached Portuguese #163 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8818) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8819) Quiet Touch Keyboard - USB, Business Black, Greek, #319 This feature provides a USB attached Greek #319 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8819) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8820) Quiet Touch Keyboard - USB, Business Black, Hebrew, #212 This feature provides a USB attached Hebrew #212 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8820) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8821) Quiet Touch Keyboard - USB, Business Black, Hungarian, #208 This feature provides a USB attached Hungarian #208 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8821) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8823) Quiet Touch Keyboard - USB, Business Black, Polish, #214 This feature provides a USB attached Polish #214 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8823) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245 This feature provides a USB attached Slovakian #245 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8825) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243 This feature provides a USB attached Czeck #243 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8826) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8827) Quiet Touch Keyboard - USB, Business Black, Turkish, #179 This feature provides a USB attached Turkish #179 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8827) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171 This feature provides a USB attached LA Spanish #171 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8829) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8830) Quiet Touch Keyboard - USB, Business Black, Arabic, #238 This feature provides a USB attached Arabic #238 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8830) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8833) Quiet Touch Keyboard - USB, Business Black, Korean, #413 This feature provides a USB attached Korean #413 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8833) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8834) Quiet Touch Keyboard - USB, Business Black, Chinese #467 This feature provides a USB attached Chinese/US #467 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8834) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445 This feature provides a USB attached French Canadian #445 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8835) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8836) Quiet Touch Keyboard - USB, Business Black, Thai, #191 This feature provides a USB attached Thai #191 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8836) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443 This feature provides a USB attached Russian #443 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8838) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8839) Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105 This feature provides a USB attached Yugoslavian/Latin #105 keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8839) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P This feature provides a USB attached US English #103P (EMEA) keyboard. Attributes provided: Keyboard Attributes required: USB Port For 7311-D11: (#8840) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#8841) Mouse - Business Black with Keyboard Attachment Cable This feature provides a three button mouse and a cable for attachment to a keyboard. Attributes provided: 3-Button Mouse Attributes required: Keyboard with Mouse Attachment Port For 7311-D11: (#8841) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.2 or AIX 5.3, or later; Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#9004) Southern Hemisphere Designator for Monitors Specifies that southern hemisphere models are required for all CRT monitors on the initial plant order or on MES orders. Not required with TFT monitors. Attributes provided: None Attributes required: Monitor For 7311-D11: (#9004) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#9006) Linux Configuration Indicator Feature #9006 indicates that the I/O drawer will be attached to a system running Linux. Attributes provided: None Attributes required: None For 7311-D11: (#9006) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9172) Power Specify, AC This feature specifies AC power for the system CEC (Central Electronics Complex) and primary I/O drawer. Attributes provided: AC power specify Attributes required: none For 7311-D11: (#9172) Minimum required: 1 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9300) Language Group Specify - US English English language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7311-D11: (#9300) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9700) Language Group Specify - Dutch Dutch language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9700) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9703) Language Group Specify - French French language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9703) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9704) Language Group Specify - German German language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9704) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9705) Language Group Specify - Polish Polish language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 7311-D11: (#9705) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9707) Language Group Specify - Portuguese Portuguese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9707) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9708) Language Group Specify - Spanish Spanish language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9708) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9711) Language Group Specify - Italian Italian language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9711) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9712) Language Group Specify - Canadian French Canadian French language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9712) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9714) Language Group Specify - Japanese Japanese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9714) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9715) Language Group Specify - Traditional Chinese (Taiwan) Traditional Chinese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9715) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9716) Language Group Specify - Korean Korean language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9716) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9718) Language Group Specify - Turkish Turkish language group for nomenclature and publications. Attributes provided: None Attributes required: None For 7311-D11: (#9718) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9719) Language Group Specify - Hungarian Hungarian language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 7311-D11: (#9719) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9720) Language Group Specify - Slovakian Slovakian language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 7311-D11: (#9720) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9721) Language Group Specify - Russian Russian language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7311-D11: (#9721) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9722) Language Group Specify - Simplified Chinese (PRC) Simplified Chinese language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7311-D11: (#9722) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9724) Language Group Specify - Czech Czech language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7311-D11: (#9724) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9725) Language Group Specify - Romanian Romanian language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9725) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#9727) Language Group Specify - Slovenian Slovenian language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7311-D11: (#9727) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Feature Exchanges Not available. Back to top   Accessories None. Customer Replacement Parts None. Back to top   Machine Elements None. Back to top   Supplies None. Diskettes None. Trademarks (R), (TM), * Trademark or registered trademark of International Business Machines Corporation. ** Company, product, or service name may be a trademark or service mark of others. Windows is a trademark of Microsoft Corporation.  © IBM Corporation 2005. Back to top