- LANGUAGES
- (#9300) - Language Group Specify - US English
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9718) - Language Group Specify - Turkish
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- (#9724) - Language Group Specify - Czech
- POWER
- (#9172) - Power Specify, AC
- LINECORDS
- (#9800) - Power Cord Specify - United States/Canada
- (#9802) - Power Cord Specify - Brazil (125V, 15A)
- (#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A)
- (#9821) - Power Cord Specify - Denmark (250V, 10A)
- (#9825) - Power Cord Specify - United Kingdom (250V, 13A)
- (#9827) - Power Cord Specify - Israel (250V, 6-16A)
- (#9828) - Power Cord Specify - Switzerland (250V, 10A)
- (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
- (#9830) - Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- (#9831) - Power Cord Specify - Australia/New Zealand/Argentina (250V,
10A)
- (#9833) - Power Cord Specify - Thailand (250V, 15A)
- (#9834) - Power Cord Specify - Uruguay (250V, 10A)
- MISCELLANEOUS
- (#0986) - CCS Customer Service Specify (US)
- (#5001) - Customer Service Specify
- (#9006) - Linux Ready Express Configuration Indicator Feature
- RACK RELATED
- (#9901) - Power Cord (4M) Specify -- Belgium Finland, France (250V,
16A)
- (#9902) - Power Cord (4M) Specify -- Denmark (250V, 10A)
- (#9903) - Power Cord (4M) Specify -- U.K. and Others (250V, 13A)
- (#9904) - Power Cord (4M) Specify -- Israel (250V, 6-16A)
- (#9905) - Power Cord (4M) Specify -- Switzerland (250V, 10A)
- (#9906) - Power Cord (4M) Specify -- India, Pakistan, S. Africa
(250V, 16A)
- (#9907) - Power Cord (4M) Specify -- Italy (250V, 10A and 16A)
- (#9908) - Power Cord (4M) Specify -- Australia/New Zealand/Argentina
(250V, 10A)
- (#9909) - Power Cord (4M) Specify -- Thailand (250V, 15A)
- (#9911) - Power Cord (4M) Specify -- All (Standard rack power cord)
- SPECIFY CODES
- (#9004) - Southern Hemisphere Designator for Monitors
- (#4651) - Rack Indicator, Rack #1
- (#4652) - Rack Indicator, Rack #2
- (#4653) - Rack Indicator, Rack #3
- (#4654) - Rack Indicator, Rack #4
- (#4655) - Rack Indicator, Rack #5
- (#4656) - Rack Indicator, Rack #6
- (#4657) - Rack Indicator, Rack #7
- (#4658) - Rack Indicator, Rack #8
- (#4659) - Rack Indicator, Rack #9
Special Features - Initial Orders
- ADAPTERS
- (#6414) - Remote I/O Loop Adapter
- (#6431) - RIO-2 Remote I/O Loop Adapter
- POWER
- (#6278) - AC Power Supply, 250W
- SPECIFY CODES
- (#8453) - Customer Specified Placement, Initial Order Only
Special Features - Plant and/or Field Installable
- ADAPTERS
- (#1820) - PCI-X Dual-port 4x IB HCA
- (#2498) - PCI 4-Channel Ultra3 SCSI RAID Adapter
- (#2737) - Keyboard/Mouse Attachment Card - PCI
- (#2751) - S/390 ESCON Channel PCI Adapter
- (#2848) - POWER GXT135P Graphics Accelerator
- (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#2946) - Turboways 622 Mbps PCI MMF ATM Adapter
- (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#4599) - PCI Blind Swap Cassette Kit, Single Wide Adapters,
Universal
- (#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
- (#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
- (#4959) - IBM Token-Ring PCI Adapter
- (#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- (#4960) - IBM e-business Cryptographic Accelerator
- (#4963) - PCI Cryptographic Coprocessor (FIPS-4)
- (#4964) - PCI Cryptographic Coprocessor
- (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5710) - PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter
- (#5711) - PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
- (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#5718) - 10 Gigabit Ethernet-SR PCI-X Adapter
- (#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
- (#5723) - 2 Port Asynchronous EIA-232 PCI Adapter
- (#6203) - PCI Dual Channel Ultra3 SCSI Adapter
- (#6204) - PCI Universal Differential Ultra SCSI Adapter
- (#6228) - 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
- (#6230) - Advanced SerialRAID Plus Adapter
- (#6231) - 128 MByte DRAM Option Card
- (#6235) - 32 MByte Fast-Write Cache Option Card
- (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#6313) - Quad Digital Trunk Telephony PCI Blind Swap Adapter
- CABLES
- (#1835) - 3 meter 4x IB Cable
- (#1836) - 8 meter 4x IB Cable
- (#1839) - 1.5 meter 4x IB Cable
- (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
- (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
- (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
- (#2425) - 2.5M 16-bit SCSI-2 System to System Cable
- (#2456) - LC-SC 50 Micron Fiber Converter Cable
- (#2459) - LC-SC 62.5 Micron Fiber Converter Cable
- (#2709) - ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
- (#2710) - ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
- (#2861) - ARTIC960Hx 4-Port EIA-232 Cable
- (#2863) - ARTIC960Hx 4-Port X.21 Cable
- (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
- (#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
- (#2934) - Asynchronous Terminal/Printer Cable EIA-232
- (#2936) - Asynchronous Cable EIA-232/V.24
- (#2951) - Cable, V.24 / EIA-232
- (#2952) - Cable, V.35
- (#2953) - Cable, V.36 / EIA-499
- (#2954) - Cable, X.21
- (#3124) - Serial to Serial Port Cable for Drawer/Drawer
- (#3125) - Serial to Serial Port Cable for Rack/Rack
- (#3146) - Remote I/O Cable, 1.2M
- (#3147) - Remote I/O Cable, 3.5M
- (#3148) - Remote I/O Cable, 10m
- (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15
pin D-shell)
- (#4256) - Extender Cable - USB Keyboards, 2M
- (#4353) - H-100 Bus 8-position Cable
- (#4691) - Rack Status Beacon Cable, Junction Box To Drawer Or Status
Beacon
- (#4692) - Rack Status Beacon Cable, Junction Box Daisy Chain
- (#6001) - Power Control Cable (SPCN) - 2 meter
- (#6006) - Power Control Cable (SPCN) - 3 meter
- (#6007) - Power Control Cable (SPCN) - 15 meter
- (#6008) - Power Control Cable (SPCN) - 6 meter
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- DISPLAYS
- (#3627) - IBM P76/P77 Color Monitor, Business Black, Captured Cable
- (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
- (#3635) - T210 Flat-Panel Monitor
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black,
Captured Cable
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - IBM ThinkVision L171p Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- KEYBOARDS
- (#8800) - Quiet Touch Keyboard - USB, Business Black, US English,
#103P
- (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189
- (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142
- (#8803) - Quiet Touch Keyboard - USB, Business Black,
German/Austrian, #129
- (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English,
#166
- (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172
- (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194
- (#8807) - Quiet Touch Keyboard - USB, Business Black,
Brazilian/Portuguese, #275
- (#8808) - Quiet Touch Keyboard - USB, Business Black, Canadian
French, #058
- (#8810) - Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch,
#120
- (#8811) - Quiet Touch Keyboard - USB, Business Black,
Swedish/Finnish, #153
- (#8812) - Quiet Touch Keyboard - USB, Business Black, Danish, #159
- (#8813) - Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
- (#8814) - Quiet Touch Keyboard - USB, Business Black,
Swiss/French/German, #150F/G
- (#8816) - Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
- (#8818) - Quiet Touch Keyboard - USB, Business Black, Portuguese,
#163
- (#8819) - Quiet Touch Keyboard - USB, Business Black, Greek, #319
- (#8820) - Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
- (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
- (#8823) - Quiet Touch Keyboard - USB, Business Black, Polish, #214
- (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
- (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243
- (#8827) - Quiet Touch Keyboard - USB, Business Black, Turkish, #179
- (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish,
#171
- (#8830) - Quiet Touch Keyboard - USB, Business Black, Arabic, #238
- (#8833) - Quiet Touch Keyboard - USB, Korean, #413
- (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese/US,
#467
- (#8835) - Quiet Touch Keyboard - USB, Business Black, French
Canadian, #445
- (#8836) - Quiet Touch Keyboard - USB, Business Black, Thai, #191
- (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443
- (#8839) - Quiet Touch Keyboard - USB, Business Black,
Yugoslavian/Latin, #105
- (#8840) - Quiet Touch Keyboard - USB, Business Black, US English
(EMEA), #103P
- MEDIA DEVICES
- (#2591) - External USB 1.44 MB Diskette Drive
- MISCELLANEOUS
- (#8841) - Mouse - Business Black with Keyboard Attachment Cable
- RACK RELATED
- (#4693) - Rack Status Beacon Junction Box
- (#7311) - Rack Mount I/O Drawer Enclosure, Two Position
Feature Descriptions
The following is a list of all feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.
The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#0986)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#1820) PCI-X Dual-port 4x IB HCA
The #1820, PCI-X Dual-port 4x InfiniBand Host Channel Adapter,
provides attachment to the Topspin Server Switch models 120 and 270.
Connection to the Topspin Server Switches are accomplished by using the
4x IB Cables.
- Attributes provided: 2 ports of 4x IB to attach to the Topspin
Server Switch models 120 and 270
- Attributes required: Available PCI-X slot
- For 7311-D10: (#1820)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: AIX 5.3, or later.
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#1835) 3 meter 4x IB Cable
This 3 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 3 meter 4x IB cable
- Attributes required: 4x IB port
- For 7311-D10: (#1835)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#1836) 8 meter 4x IB Cable
This 8 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 8 meter 4x IB cable
- Attributes required: 4x IB port
- For 7311-D10: (#1836)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#1839) 1.5 meter 4x IB Cable
This 1.5 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 1.5 meter 4x IB cable
- Attributes required: 4x IB port
- For 7311-D10: (#1839)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2
differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7311-D10: (#2114)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI
connector to a 68-pin P style connector. Cable has male Mini-68 pin
VHDCI connector on one end and a female 68 pin P style connector on the
other. Length = 0.3 meters.
- Attributes provided: Attachment of supported external sub-system to
integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
- Attributes required: None
- For 7311-D10: (#2118)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2424) 0.6M 16-bit SCSI-2 System to System Cable
(No Longer Available as of December 10, 2004)
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7311-D10: (#2424)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2425) 2.5M 16-bit SCSI-2 System to System Cable
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7311-D10: (#2425)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2456) LC-SC 50 Micron Fiber Converter Cable
50 micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 50 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 7311-D10: (#2456)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2459) LC-SC 62.5 Micron Fiber Converter Cable
62.5 micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 62.5 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 7311-D10: (#2459)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter
(No Longer Available as of December 12, 2003)
The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a non-
bootable high performance Ultra3 SCSI RAID Adapter providing RAID 0,1,1E,
5, or 5E capability and can address up to sixty 16-bit SCSI physical disk
drives on four independent SCSI buses.
To increase the data writing performance, a 128 MByte fast-write cache
is provided as a resident part of this adapter. The 128 MByte fast-write
cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter
that utilizes non-volatile RAM. During the unlikely event of an PCI
4-Channel Ultra3 SCSI RAID Adapter failure, a replacement PCI 4-Channel
Ultra3 SCSI RAID Adapter can be installed and the fast-write cache can be
removed from the failing adapter and installed in the new adapter to help
ensure data integrity. The 128 MByte fast-write cache can provide an
significant improvement in data throughput and response time during
certain sequence write operations compared to SCSI RAID adapters without
the fast-write cache. The response time and data transfer improvement
will vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.
The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3
SCSI buses. There are two internal ports and four external ports. The
two internal ports are shared with two of the external ports. Two of the
four busses can drive either an internal port or an external port. The
other two busses only drive external ports. The internal ports can be
used to provide an internal RAID solution on supporting RS/6000 systems.
Systems with one or two internal 6-pack disks can attach to a PCI
4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide
connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate. The four external ports also provide connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate.
Limitations:
- The four external ports do not support the connection to the IBM
7131-105 external Fast/Wide SCSI disk enclosure.
- Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that
run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up
to 80MBytes/s), the internally attached disk drives will run at a maximum
SCSI bus data rate specified by that supporting system backplane.
In order for full support and to take full advantage of the Ultra3 (up
to 160 MBytes/s) speed of this adapter, the proper AIX level also needs
to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX
versions support the full range of SCSI bus data rates (including Ultra3
SCSI up to 160 MByte/s). Check the AIX level your system has or is able
to support.
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI bus slot
- For 7311-D10: (#2498)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2591) External USB 1.44 MB Diskette Drive
The externally attached USB diskette drive provides storage capacity
up to 1.44 MB on a high density (2HD) floppy disk and 720 KB on a
double density floppy disk. Includes 350mm (13.7 in) captured cable
with standard USB connector.
Limitation:
- Maximum 1 USB diskette per adapter,
- Up to 1 Keyboard and Mouse also supported on the adapter with
the diskette drive at the same time
- No system boot capability
- Not to be operated upside down or with eject button down
Characteristics:
- Capacity - 1.44 MB (2HD disk) or 720 KB (double density disk)
- Physical Dimensions: Width=103mm (4.05 in), Height=17.6mm (.69 in),
Depth=141.8mm (5.58 in)
- Color: Black
- Data Rate: 12 Mbits/sec
- Max Power Consumption: 2.36 Watt (seek)
- Operates in all positions except those noted in the limitations
above
- Attributes provided: External diskette drive
- Attributes required: 1 available USB port
- For 7311-D10: (#2591)
(#2709) ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
(No Longer Available as of June 25, 2004)
4-Port T1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
ARTIC960RxD Quad Digital Trunk adapter.
- Attributes provided: 4-Port T1 RJ48 cable
- Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk
Adapter
- For 7311-D10: (#2709)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2710) ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
(No Longer Available as of June 25, 2004)
4-Port E1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
the ARTIC960RxD Quad Digital Trunk Adapter.
- Attributes provided: 4-Port E1 RJ-48 cable
- Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk
Adapter
- For 7311-D10: (#2710)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2732) IBM Short-wave Serial HIPPI PCI Adapter for RS/6000
(No Longer Available as of December 10, 2004)
The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit
PCI adapter supporting TCP/IP over a serial HIPPI link. Data is sent and
received over optical fiber at 1.2 Gbps using the HIPPI standard 20/24
bit encoding scheme with short wave optical transducers. The effective
maximum data rate of the HIPPI interface is 800 Mbps.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements.
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Attachment to HIPPI Network
- Attributes required: One 32-bit PCI Slot and LPP 5765-E07
- For 7311-D10: (#2732)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2737) Keyboard/Mouse Attachment Card - PCI
(No Longer Available as of December 30, 2005)
This PCI card provides for connection of one USB keyboard and mouse.
- Attributes provided: USB Keyboard/Mouse Attachment
- Attributes required: Empty PCI slot
- For 7311-D10: (#2737)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2751) S/390 ESCON Channel PCI Adapter
(No Longer Available as of December 10, 2004)
Provides RS/6000 Systems the ability to attach to IBM Enterprise
Systems Connection (ESCON) channels of the System/390 server. The S/390
ESCON Channel PCI Adapter attaches directly to an ESCON channel providing
fiber optic links using LED technology, and also attaches to ESCON
Directors (fiber optic switches) permitting connections to multiple
Channels. Host operating systems supported include VM/ESA, MVS/ESA, and
OS/390.
- Supported on AIX Version 4.3.0 with separately orderable device
driver in License Program Number 5765-D49.
- Control Unit Multi-path definitions are not supported in IOCP or HCD.
- 3174 Emulation Mode is not supported. For SNA users, MPC Emulation
is now supported.
- S/390 TCP/IP support is available in:
- IBM TCP/IP Version 3.1 or later for VM (5735-FAL)
- IBM TCP/IP Version 3.1 or later for MVS (5735-HAL)
- MPC support is available in IBM TCP/IP Open Edition Version 3.4 or
later, which is shipped as part of OS/390 2.5 (5647-A01) when used in
conjunction with IBM VTAM Version 4.4 or later (5695-117).
- Requires ESCON external cabling
- APAR OW33336 is recommended to be installed on OS/390 BCP.
Characteristics:
- Single slot, full length PCI adapter
- Supports VM, MVS, and OS/390
- Supports 3088, CLAW (TCP/IP), and MPC (SNA and TCP/IP) Emulations.
- Supports CLIO/S.
- Provides the same API for user-written application programs for CLAW
and 3088 Emulations as ESCON Channel Connectivity for AIX V1.1 LPP
(5765-603)
- Supports attachment to either 10MB or 17MB ESCON channels.
- Supports ESCON Multiple Image Facility (EMIF)
- Maximum distance supported using a combination of LED and XDF ESCON
links is 43 Km.
- Attributes provided: 1 ESCON channel attachment interface
- Attributes required: One PCI slot
- For 7311-D10: (#2751)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2848) POWER GXT135P Graphics Accelerator
(No Longer Available as of December 12, 2003)
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs
- Up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 4.3.3 or 5.1
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 7311-D10: (#2848)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2849) POWER GXT135P Graphics Accelerator with Digital Support
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 7311-D10: (#2849)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2861) ARTIC960Hx 4-Port EIA-232 Cable
- Attributes provided: 4-port EIA-232 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7311-D10: (#2861)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2863) ARTIC960Hx 4-Port X.21 Cable
- Attributes provided: 4-port X.21 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7311-D10: (#2863)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable
- Attributes provided: 4-port X.35 (DTE) cable for (#2947)
- Attributes required: One #2947 adapter
- For 7311-D10: (#2864)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 4-position cable should be used when
four or less adapters with H.100 connectors will be interconnected. When
more than 4 and less than or equal to 8 adapters will be connected, the
H.100 Bus 8-Drop Cable (#4353) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: Two to Four H.100 adapters
- For 7311-D10: (#2877)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2934) Asynchronous Terminal/Printer Cable EIA-232
The Asynchronous Printer/Terminal Cable is used for attaching
printers, plotters, and terminals that support the EIA-232 standard to
any asynchronous adapter. This cable is the equivalent of the
combination of FC 2936 (modem cable) and FC 2937 (printer/terminal
interposer) and replaces this method of printer/terminal attachment.
This cable is 3m (9.8 feet) long, uses DB25 connectors and is
supported on all RS/6000 systems using any asynchronous ports. It is is
used in conjunction with :
- FC 2931 (8-port Async Adapter EIA232, ISA bus)
- FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
- Attributes provided: EIA232 device attachment capability
- Attributes required: Any RS/6000 Asynchronous port
- For 7311-D10: (#2934)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2936) Asynchronous Cable EIA-232/V.24
Used to attach a modem to the standard I/O ports with the 10-pin to
25-pin converter cable (shipped with the system), 8-port Cable Assembly,
16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to
DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote
Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The
cable is 3 meters (9.8 feet) in length.
- Attributes provided: Modem attachment to async or serial port
- Attributes required: Async or serial port
- For 7311-D10: (#2936)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 7311-D10: (#2943)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2944) 128-Port Asynchronous Controller, PCI bus
(No Longer Available as of March 31, 2006)
The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.
RANs can also be used with this adapter. If these RANs are connected
the synchronous channel the data rate drops down to 1.2 Mbps. For the
best results keep the previous and new RANs on separate synchronous
channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 7311-D10: (#2944)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2946) Turboways 622 Mbps PCI MMF ATM Adapter
(No Longer Available as of December 17, 2004)
The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal
PCI Adapter. This adapter provides direct access to the ATM network at a
dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI
MMF ATM Adapter is a short form-factor adapter that interfaces to the
system via the PCI bus and connects to the 622 Mbps ATM network via
dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF
ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for
packet memory. This ATM adapter also provides a hardware assist for TCP
checksum which can provide a performance improvement by minimizing the
host CPU cycles .
- Attributes provided: One full-duplex connection to 622 ATM network
- Attributes required: One available PCI card slot
- For 7311-D10: (#2946)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one-
slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of:
EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of
up 2.0M bps. Software support is provided by ARTIC960 Support for AIX,
Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC
and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that
provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations. Go to to the
following URL to view the latest AIX 5.1 support limitation statements.
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: One to four WAN connections at up to 2.0Mbps
- Attributes required: One full length 32-bit PCI slot, AIX Version
4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5,
4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
- For 7311-D10: (#2947)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2951) Cable, V.24 / EIA-232
(No Longer Available as of December 30, 2005)
V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7311-D10: (#2951)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2952) Cable, V.35
(No Longer Available as of December 30, 2005)
V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7311-D10: (#2952)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2953) Cable, V.36 / EIA-499
(No Longer Available as of December 30, 2005)
V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter.
Maximum of two cables per #2962.
- For 7311-D10: (#2953)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2954) Cable, X.21
(No Longer Available as of December 30, 2005)
X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7311-D10: (#2954)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2962) 2-Port Multiprotocol PCI Adapter
(No Longer Available as of December 30, 2005)
This adapter provides high-speed connections between stand-alone
system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI
Adapter connects via external communications equipment including Channel
Service Units (CSU), Data Service Units (DSU), or through synchronous
modems.
This adapter together with IBM AIXlink/X.25 provides a two-port
connection to X.25 packet switched networks. IBM AIXlink/X.25 is a
separately orderable LPP (5696-926).
2-Port Multiprotocol PCI Adapter with an appropriate cable is
compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954)
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952)
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
- CCITT V.10 Electrical
- CCITT V.11 Electrical
- Attributes provided: Two high speed WAN connections
- Attributes required: One PCI slot
- For 7311-D10: (#2962)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3124) Serial to Serial Port Cable for Drawer/Drawer
This 3.7 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted within
the same rack. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#3124)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3125) Serial to Serial Port Cable for Rack/Rack
This 8 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted in
separate racks. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#3125)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3146) Remote I/O Cable, 1.2M
This 1.2 meter RIO-G cable is available to connect the processor
complex and the I/O drawers.
- Attributes provided: Interconnection of CEC and I/O drawers
- Attributes required: None
- For 7311-D10: (#3146)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3147) Remote I/O Cable, 3.5M
This 3 1/2 meter RIO-G cable is available to connect the processor
complex and the I/O drawers. It can also be utilized to connect I/O
drawers mounted in separate racks.
- Attributes provided: Interconnection of CEC and I/O drawers
- Attributes required: None
- For 7311-D10: (#3147)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3148) Remote I/O Cable, 10m
This 10 meter RIO-G cable is available to connect the processor
complex and the I/O drawers. It can also be utilized to connect I/O
drawers mounted in separate racks.
- Attributes provided: Interconnection of CEC and I/O drawers
- Attributes required: None
- For 7311-D10: (#3148)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable
(No Longer Available as of July 25, 2003)
The P76/P77 monitor has the following general characteristics:
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable
(No Longer Available as of February 27, 2004)
The P260/P275 monitor has the following general characteristics:
(#3635) T210 Flat-Panel Monitor
(No Longer Available as of February 18, 2003)
The T210 flat-panel monitor has the following general characteristics:
- Business Black color
- 21-inch TFT LCD digital screen with a viewable image size of 528 mm
(20.8 inches) measured diagonally, incorporating a 0.207 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
2048 x 1536 pels at 60Hz.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7311-D10: (#3635)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3636) L200P Flat Panel Monitor
The L200p flat-panel monitor has the following general
characteristics:
(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable
The T541H and the L150p monitors have the following general
characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 7311-D10: (#3637)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
(No Longer Available as of June 24, 2005)
The IBM C220p monitor has the following general characteristics:
- Business Black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7311-D10: (#3638)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3639) IBM ThinkVision L170p Flat Panel Monitor
(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:
- Business color
- 17.0-inch LCD digital screen with a viewable image size of
432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm
pixel pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7311-D10: (#3639)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
The IBM ThinkVision L171p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
- Contrast ratio: 500:1 (minimal) 700:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7311-D10: (#3640)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#3642) - ThinkVision L191P Flat Panel Monitor
The ThinkVision L191p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7311-D10: (#3642)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
This cable is required to connect displays with a 15-pin "D" shell
connector to the appropriate accelerator connector when it is farther
away than the attached monitor cable can reach. Rack mounted systems are
likely candidates for this extender cable.
- Attributes provided: 6-foot extension cable
- Attributes required: Supported monitor and adapter with a 15-pin "D"
shell connector.
- For 7311-D10: (#4242)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4256) Extender Cable - USB Keyboards, 2M
This feature provides a 2M extension cable for use with USB keyboards.
- Attributes provided: 2M Extension Cable
- Attributes required: USB Keyboard
- For 7311-D10: (#4256)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4353) - H-100 Bus 8-position Cable
(No Longer Available as of December 10, 2004)
This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 8-position cable should be used when
more than four and less than or equal to eight adapters with H.100
connectors will be interconnected. If four or less adapters are
interconnected, the H.100 Bus 4-Drop Cable (#2877) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: Four to eight H.100 adapters
- For 7311-D10: (#4353)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4599) PCI Blind Swap Cassette Kit, Single Wide Adapters, Universal
This feature contains a blind swap cassette for single slot width PCI
adapters. It also includes the necessary hardware to adapt the cassette
to mount various sizes of PCI cards.
- Attributes provided: Blind swap PCI cassette
- Attributes required: PCI card and empty PCI adapter location
- For 7311-D10: (#4599)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#4651) Rack Indicator, Rack #1
This indicator is used to specify the first rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the first rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4651)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4652) Rack Indicator, Rack #2
This indicator is used to specify the second rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the second rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4652)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4653) Rack Indicator, Rack #3
This indicator is used to specify the third rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the third rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4653)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4654) Rack Indicator, Rack #4
This indicator is used to specify the fourth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fourth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4654)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4655) Rack Indicator, Rack #5
This indicator is used to specify the fifth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fifth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4655)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4656) Rack Indicator, Rack #6
This indicator is used to specify the sixth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the sixth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4656)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4657) Rack Indicator, Rack #7
This indicator is used to specify the seventh rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the seventh rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4657)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4658) Rack Indicator, Rack #8
This indicator is used to specify the eighth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the eighth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4658)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4659) Rack Indicator, Rack #9
This indicator is used to specify the ninth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the ninth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7311-D10: (#4659)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4691) Rack Status Beacon Cable, Junction Box To Drawer Or Status Beacon
(No Longer Available as of November 18, 2005)
This cable can be used to connect the Rack Status Beacon Junction Box
to a supported rack drawer or to the Rack Status Beacon.
- Attributes provided: Connection between Rack Status Beacon
components
- Attributes required: None
- For 7311-D10: (#4691)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4692) Rack Status Beacon Cable, Junction Box Daisy Chain
(No Longer Available as of November 18, 2005)
This cable is used to connect two Rack Status Beacon Junction Boxes
(#4693) together. Multiple Junction Boxes may be linked in series, as
required.
- Attributes provided: Connection between (#4693) Junction Boxes
- Attributes required: Two or more (#4693) Junction Boxes
- For 7311-D10: (#4692)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4693) Rack Status Beacon Junction Box
(No Longer Available as of November 18, 2005)
This feature provides six input connectors and one output connector
for racks configured with the Rack Status Beacon (#4690). Multiple
Junction Boxes can be linked together in series with Daisy Chain Cable
#4692.
- Attributes provided: Connection of multiple drawers to a single Rack
Status Beacon (#4690).
- Attributes required: Feature #4690 and two or more #4691 cables.
- For 7311-D10: (#4693)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4953) IBM 64bit/66MHz PCI ATM 155 UTP Adapter
(No Longer Available as of December 17, 2004)
The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155
Mbps full-duplex connection to ATM networks over either permanent virtual
circuits (PVC) or switched virtual circuits (SVC). This adapter enables
TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair
(UTP). It also supports communication with devices located on an ATM
network or bridged to a Token-Ring, Ethernet, or other LAN.
- Attributes provided: One ATM 155 UTP connector
- Attributes required: One PCI slot
- For 7311-D10: (#4953)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter
(No Longer Available as of March 31, 2006)
The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to
ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155
Mbps full-duplex connection using permanent virtual circuits (PVC) or
switched virtual circuits (SVC) and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on
an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
This 155 Mbps PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
- Attributes provided: One ATM 155Mbps MMF connection
- Attributes required: One PCI slot
- For 7311-D10: (#4957)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4959) IBM Token-Ring PCI Adapter
(No Longer Available as of March 31, 2006)
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short,
32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half-
duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into
the ring, even when connected to speed-sensing hubs. This adapter will
operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45
connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin
D-shell connectors. The Token-Ring PCI Adapter will provide network boot
capability.
- Attributes provided:
- Attributes required: A single empty 32-bit PCI adapter slot.
- For 7311-D10: (#4959)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4960) IBM e-business Cryptographic Accelerator
The IBM e-business Cryptographic Accelerator is a short form factor
PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure
Web transaction, SSL operations is a key requirement. To do this,
public-key cryptographic operations using SSL handshake protocol is
employed. The IBM e-business Cryptographic Accelerator is a hardware
cryptographic solution that off-loads this compute-intensive public-key
cryptographic processing from the host.
The overall operation control, including command decoding, is
implemented in hardware and requires no on-card microprocessor subsystem.
As such, the adapter is a less expensive alternative to those who do not
need the high security of the on-card secure programming environment such
as is offered by the PCI Cryptographic Coprocessor(#4958), but do need
the high cryptographic performance that hardware acceleration provides by
offloading the host processor.
Note: The IBM e-business Cryptographic Accelerator is only supported by
the industry-standard PKCS #11 application programming interface (API)
Version 2.01, and applications which interface to the PKCS #11 Support
Program.
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7311-D10: (#4960)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4961) IBM Universal 4-Port 10/100 Ethernet Adapter
(No Longer Available as of March 31, 2006)
IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long,
64-bit, 33 MHz PCI adapter supporting 4 industry-standard Ethernet 10
Base-T or 100 Base-T interfaces either half or full-duplex. Each port is
provided with it's own RJ-45 connector for attachment to standard CAT-3/5
Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u
compatible and provides full auto-negotiation for detecting speed and
duplex capability across each port. Network boot capability and Network
Install Manager (NIM) capability are available using this adapter if no
specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet
Adapter (#4961) should be considered where maximum port density is
required per I/O card slot. But, for high end systems, where card slots
are not the limiting factor and maximum throughput is required, the
single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM
10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions.
Below are some performance factors to consider when choosing the right
adapter for your needs. These performance comparisons are based on all
four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961)
being active.
- With all four ports under full bandwidth conditions, a single IBM
Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver
up to 3 times the comparable performance of a single IBM 10/100 Mbps
Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI
Adapter (#2968).
- Under most conditions, each port of the IBM Universal 4-Port 10/100
Ethernet Adapter (#4961) is expected to perform at greater than 50% the
throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter
II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968).
Note: The resulting performance in your environment compared to the above
may vary and depends upon the RS/6000 model, the I/O configuration, and
associated workload of your applications.
- Attributes provided: 4 ports of 10/100 Base-Tx Ethernet
- Attributes required: 1 PCI slot
- For 7311-D10: (#4961)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4962) 10/100 Mbps Ethernet PCI Adapter II
(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full-duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
- Half / Full-Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full-duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates)and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 7311-D10: (#4962)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both of these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
(#4963) PCI Cryptographic Coprocessor (FIPS-4)
(No Longer Available as of February 8, 2005)
The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter
which combines hardware and software to provide a wide variety of
security services. The PCI Cryptographic Coprocessor (FIPS-4) is a
second generation adapter of the Cryptographic Coprocessor family that
provides high performance secure hardware engines for secure internet
transactions such as transmitting data, verifying electronic signatures,
bulk data encryption and decryption. In addition, the card is enclosed
in a tamper proof enclosure to restrict access to on card resources,
designed to FIPS 140-1 Level 4 standards.
Security functions supported by the adapter include:
- DES (Data Encryption Standard) (40-and 56-bit key) encryption and
decryption, with pre-and post-padding; the coprocessor uses both ECB
(electronic and codebook) and CBC (cipher block chain) modes of
encryption.
- MAC (Message Authentication) generation and MAC verification services
- Triple DES (three key) encryption and decryption of eight-byte units
- Secure RSA key-pair generation
- RSA signature generation and signature verification at 18
signatures/sec at 2048 bits
- Hardware random number generation
- Secure data storage and retrieval
- Other non-cryptographic security utilities can be carried out using
the onboard processor
As part of this adapter's physical security features, the following
events will cause an adapter shutdown and secure data zeroization.
- Shipping/Storage Temperature less than -15C or greater than 95C
- Dead Battery (VBAT less than 2.4V)
- Supply Voltage greater than 3.3V/12V max
- Mesh Sensor opens/shorts detection
- X-ray exposure
IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for download
from the following Web site:
- http://www.ibm.com/security/cryptocards
- PKCS #11 Version 2.01, an implementation of the industry-standard API
- IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ to
develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and cryptographic
hardware. For more information on custom contracts, refer to the
following Web site:
- http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:
- http://www.ibm.com/security/cryptocards
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.
(#4964) PCI Cryptographic Coprocessor
The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter
combining hardware and software designed to provide high performance
hardware engines for secure internet transactions such as data exchange,
verifying electronic signatures, bulk data encryption and decryption.
Cryptographic processes are performed within a tamper resistant
enclosure on the adapter that is designed to meet FIPS PUB 140-1
standard for commercial cryptographic devices at Level 3.
Security functions supported by the adapter includes:
- Data Encryption Standard (DES) (56 and 40 bit keys) encryption and
decryption, with pre- and post-padding; the coprocessor uses both
electronic and codebook (ECB) and cipher block chain (CBC) modes of
encryption.
- Message Authentication (MAC) and financial PIN processing
- Triple DES encryption and decryption of general data
- RSA key-pair generation
- RSA signature generation and signature verification
- Secure Hashing Algorithm (SHA-1) in hardware
- Hardware random number generation
- Protected data storage and retrieval
- Other non-cryptographic security utilities can be carried out
using the onboard processor
IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for
download from:
- http://www.ibm.com/security/cryptocards
- PKCS #11 Version 2.01, an implementation of the industry-standard
API
- IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ
to develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and
cryptographic hardware. For more information on custom contracts,
refer to:
- http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed
device in order to meet restrictive shipping requirements.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7311-D10: (#4964)
(#5001) Customer Service Specify
This feature code specifies that the system will receive special
request services from the Center for Customer Services (CCS) in
Rochester.
- Attributes provided: Customization
- Attributes required: None
- For 7311-D10: (#5001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64-bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7311-D10: (#5700)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex
Gigabit Ethernet adapter designed with highly integrated components to
optimize cost and performance. This adapter can be configured to run at
10, 100, or 1000 Mbps data rates. The adapter interfaces to the system
via the PCI-X bus and connects to the network using a 4-pair CAT-5
Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX
Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
Note: For optimum performance, adapter should be placed in a 64-bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7311-D10: (#5701)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a
Full-Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For
optimum performance, the adapter should be placed in a 64 bit PCI-X card
slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7311-D10: (#5706)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution. Note: For optimum
performance, the adapter should be placed in a 64 bit PCI-X card slot
whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7311-D10: (#5707)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5710) PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter
(No Longer Available as of March 31, 2006)
The PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter (#5710) is a
64-bit 3.3 volt adapter and is an excellent solution for high-performance
SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Blind Swap
Adapter provides two SCSI channels (busses), each capable of running 320
MBps (max.), up to twice the maximum data transfer rate of the previous
Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be
internal (on systems that support internal SCSI device or backplane
attachments) or external. Internally attached Ultra320 devices can run
at a data rate of up to 320 MB per second on systems that have internal
backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI Blind Swap Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate. The two external ports also
provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1
Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also
the two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter (#5710) is a
native boot adapter with AIX 5.1 or AIX 5.2 software in a supported
pSeries or RS/6000 systems. The adapter also supports target mode.
Limitations:
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the
internally attached disk drives will run at a maximum SCSI bus data rate
specified by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003, require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available 3.3 volt PCI or PCI-X slot
- For 7311-D10: (#5710)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5711) PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
The PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter (#5711)
is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID
Adapter providing RAID 0,5, or 10 capability and can address up to thirty
16-bit SCSI physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 40 MByte fast-write cache
is provided as a resident part of this adapter. The 40 MByte fast-write
cache is resident on the Dual Channel Ultra320 SCSI RAID Blind Swap
Adapter and utilizes non-volatile RAM. The 40 MByte fast-write cache can
provide an significant improvement in data throughput and response time
during certain sequence write operations compared to SCSI RAID adapters
without the fast-write cache. The response time and data transfer
improvement will vary depending upon the data block sizes, the percentage
of sequential writes, machine type/model, and application parameters.
The Dual Channel Ultra320 SCSI RAID Blind Swap Adapter has two
independent ultra320 SCSI buses. There are two internal ports and two
external ports. The two internal ports are shared with the two external
ports. The SCSI busses can drive either an internal port or an external
port. The internal ports can be used to provide an internal RAID
solution on certain supporting pSeries systems with internal multiple
disk drives or packs of drives. Internally attached Ultra320 devices are
designed to run at a data rate of up to 320 MB per second on systems that
have internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or external ports) are required to be formatted to 522 byte
sectors. 522 byte sectors provide additional CRC error checking for
improved data integrety. A menu option is provided in the AIX supporting
software which will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array, a similar
menu option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors.
Also, there are some disk drives which do not support being formatted
to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the
user of these known situations when they exist. For disk microcode
updates, go to the following web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI RAID Blind Swap Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate configured as either a non-array or
an array of disks. Also the two external ports provide non-array
connectivity to numerous other SCSI external subsystems. Check the
external subsystem sales/web pages for verification of connectivity
support with this adapter.
Limitations:
- The two external ports provide connectivity to an IBM 2104-DU3
Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower
at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only
non-array configuration support.
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the
internally attached disk drives will run at a maximum SCSI bus data rate
specified by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI or PCI-X bus slot
- For 7311-D10: (#5711)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#5716) 2 Gigabit Fibre Channel PCI-X Adapter
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit
address/data, short form factor PCI-X adapter with an LC type external
fiber connector that provides single or dual initiator capability
over an optical fiber link or loop. With the use of appropriate
optical fiber cabling, this adapter provides the capability for a
network of high speed local and remote located storage. The 2
Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for
the highest data rate (either 1 Gbps or 2 Gbps) of which the device
or switch is capable. Distances of up to 500 meters running at
1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are
supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches
supporting long-wave optics, distances of up to 10 kilometers are
capable running at either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to
attach devices either directly, or by means of Fibre Channel
Switches. If attaching a device or switch with a SC type fiber
connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456)
or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.
Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required
order Feature Code #6239- 2 Gigabit Fibre Channel PCI-X Adapter.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 7311-D10: (#5716)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5718) 10 Gigabit Ethernet-SR PCI-X Adapter
Provides 10 Gigabit Ethernet PCI-X based server connections. Supports
distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um
multimode fiber. Adapter connector type is LC.
- Attributes provided: Conforms to the IEEE 802.3ae standard
- Attributes required: Supported on PCI-X slots only
- For 7311-D10: (#5718)
(#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter
Offers 10 Gigabit Ethernet PCI-X based server connections over a
maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The
adapter conforms to the IEEE 802.3ae standard. The adapter requires
9um single-mode fiber optic cables and uses a SC connector type for
connecting into net-work infrastructure components like 10 Gigabit
Ethernet switch/router with SC connectors.
- Attributes provided: 10 Gigabit Ethernet connections
- Attributes required: Available PCI-X slot
- For 7311-D10: (#5719)
(#5723) 2 Port Asynchronous EIA-232 PCI Adapter
Connection for 2 Asynchronous EIA-232 devices. Ports are
Programmable to support EIA-232 protocols, at a line speed of 128K bps.
- Attributes provided: 2 Asynchronous Ports
- Attributes required: One PCI Slot
- For 7311-D10: (#5723)
(#6001) Power Control Cable (SPCN) - 2 meter
This feature provides a two-meter power control cable.
- Attributes provided: 2M power control cable
- Attributes required: I/O drawer
- For 7311-D10: (#6001)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6006) Power Control Cable (SPCN) - 3 meter
This feature provides a three-meter power control cable.
- Attributes provided: 3M power control cable.
- Attributes required: two drawers in the same rack.
- For 7311-D10: (#6006)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6007) Power Control Cable (SPCN) - 15 meter
This feature provides a fifteen-meter power control cable.
- Attributes provided: 15M power control cable.
- Attributes required: I/O drawer
- For 7311-D10: (#6007)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6008) Power Control Cable (SPCN) - 6 meter
This feature provides a six-meter power control cable.
- Attributes provided: 6M power control cable
- Attributes required: I/O drawer
- For 7311-D10: (#6008)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6203) PCI Dual Channel Ultra3 SCSI Adapter
(No Longer Available as of December 12, 2003)
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64-bit adapter
and is an excellent solution for high-performance SCSI applications. The
PCI Dual Channel Ultra3 SCSI Adapter provides two SCSI channels (busses).
Each SCSI bus can either be internal (on systems that support internal
SCSI device or backplane attachments) or external and will support a data
rate of up to 160 MBytes per second, up to twice the maximum data
transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes
per second).
In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes
per second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this Ultra3 160 MBytes per second performance, all attaching
devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2
and Ultra3 devices coexist on the same bus, each device will operate at
its rated speed. For lower speed single-ended (SE) devices, the SCSI bus
will switch to single-ended (SE) performance and interface at the lower
SE bus data rate of the device.
Two industry-standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE subsystems to allow
connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI
Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI port will auto-throttle to a "Fast"
interface speed running no faster than 20MB/s maximum. This auto-
throttle function is performed to ensure best signal quality between host
adapter and attaching subsystem. The second external port is unaffected
unless a SE subsystem is also attached to it. If so, it would also auto-
throttle as described above.
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot
adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the
supported pSeries or RS/6000 systems.
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available PCI slot
- For 7311-D10: (#6203)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6204) PCI Universal Differential Ultra SCSI Adapter
(No Longer Available as of December 30, 2005)
The PCI Universal Differential Ultra SCSI Adapter is the latest
technology advancement of an RS/6000 SCSI-2 differential adapter with a
maximum data transfer rates of 40 MBytes per second. This adapter has
the capability to be plugged into the newer +3.3 volt PCI slots as well
as the older +5 volt PCI slots. Feature code # 6204 allows connection to
external differential SCSI-2 F/W or Ultra SCSI type devices up to 25
meters away. Feature code # 6204 will negotiate with each external
device and transfer data at the fastest SCSI data transfer rate capable
by the external device. Check system sales pages as to which external
differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra)
documentation. Industry-standard 68 pin connectors are incorporated
(SCSI "P" connector definition of X3T9.2/90-048).
- Attributes provided: 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 7311-D10: (#6204)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6228) 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
(No Longer Available as of August 8, 2003)
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a 64-bit
address/data, short form factor PCI adapter with LC type external fiber
connectors that provides single or dual initiator capability over an
optical fiber link or loop. With the use of appropriate optical fiber
cabling, this adapter provides the capability for a network of high speed
local and remote located storage. The 2 Gigabit Fibre Channel Adapter
for 64-bit PCI Bus will auto-negotiate for the highest data rate (either
1Gps or 2Gps) of which the device or switch is capable. Distances of up
to 500 meters running at 1Gbps data rate and up to 300 meters running at
2Gbps data rate are supported between the adapter and an attaching device
or switch. When used with IBM supported Fibre Channel storage switches
supporting long-wave optics, distances of up to 10 kilometers are capable
running at either 1Gps or 2Gps data rates.
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be used to
attach devices either directly, or by means of Fibre Channel Switches.
If attaching a device or switch with a SC type fiber connector(s), use of
an LC-SC Fibre Channel Conversion Cable (#2456) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 FC/FC-AL interface
- Attributes required: 1 empty PCI slot
- For 7311-D10: (#6228)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6230) Advanced SerialRAID Plus Adapter
(No Longer Available as of June 24, 2005)
The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop)
Serial Storage Architecture (SSA) adapter providing an instantaneous data
transfer rate of up to 160 MByte/s per loop. It also provides eight-
initiator, non-RAID capability, two-initiator RAID 1, two-initiator RAID
0 + 1, two-initiator RAID 5, or one-initiator RAID 0 capability. The
adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that
improves write performance in RAID 0+1, RAID 5, and non-RAID
applications. When the 32 MByte Fast-Write Cache Option Card is used,
the adapter can be configured in either single or dual initiator fast-
write cache mode. In dual initiator fast-write cache mode, if one of the
two adapters fail, the failing adapter is designed to transfer control
over to the other. Also, in dual initiator Fast Write Cache mode, the
128 MByte DRAM Option Card (#6231) is available and required to utilize
the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte
DRAM Option Card is not used in dual initiator fast-write cache mode, the
effective fast-write cache capacity will be 16 MBytes on each adapter.
See the 128 MByte DRAM Option Card (#6231) for information.
The Advanced SerialRAID Plus Adapter when operated in a RAID 5
configuration will support (2+P) to (15+P) arrays and up to 6 (15+P)
arrays. When operated in a RAID 1 or RAID 0+1 configuration, will
support up to eight disk drives mirrored. The adapter also supports Hot
Spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter
also supports connectivity to external disk enclosures and internal
RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also
supported (Refer to IBM 7133 Sales literature for additional information)
Any supported RS/6000 system can be set up to boot from an Advanced
SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included
as part of the configuration. Other disks associated with the adapter
can be RAID but at least one disk must be a non-RAID SSA disk. The
non-RAID SSA disk can be located under the covers of a processor unit or
in an external SSA storage unit. If your system is running with AIX
4.3.3 or later software, native boot capability is supported. For
factory system orders with AIX preload requested, an internal SCSI disk
drive will be preloaded as the native boot disk even if internal SSA disk
drive(s) are present. If your system is running with AIX 4.2.1 or AIX
4.3.2 software, the below procedure applies in order to boot using the
Advanced SerialRAID Plus Adapter:
- The non-RAID SSA disk can be located under the covers of a processor
unit or in an external SSA storage unit.
- A supported AIX version of software (with proper updates) must be
loaded to the non-RAID SSA disk using AIX's Network Install Manager
(NIM) before booting from the non-RAID disk.
- The system with a non-RAID SSA disk must have a network connection
with another RS/6000 system performing the NIM Master function to perform
the install. On RS/6000 SP systems, a similar network install is
performed from a control workstation.
- Once AIX with updates is installed on the non-RAID SSA disk and the
system is configured for booting, booting will take place from the boot
disk without any support from the control processor or NIM Master and the
system does not have to be connected to the network at boot time.
After October 3, 2000, a 3-Way Copy Function will be available. This
3-Way Copy Function allows a user to create a third copy to an existing
RAID-1 or RAID 0+1 array while mirrored operation continues. 3-Way Copy
allows the user, at any time after the copy process has completed, to
split the third copy off from the original RAID-1 or RAID 0+1 array to
form an independent RAID copy. This third copy or "snapshot" copy could
be typically used to perform a backup or to test some new application.
The 3-Way Copy Function is available only via a code download and can
only be gained by going to the SSA Web support pages defined below.
When performing SSA device or subsystem planning, installation,
upgrades, or preventive maintenance, refer to the following Web support
pages. They provide access to the latest SSA publications and support
code for the system, SSA adapters, and SSA subsystems. These sites
should also be considered during system hardware and/or operating system
upgrades if SSA devices are included in the system.
http://www.storage.ibm.com/hardsoft/products/ssa/
The above link contains links to SSA publications and other SSA Web
sites, including the one below.
http://www.storage.ibm.com/hardsoft/products/ssa/
rs6k/index.html
The above link contains lists of the latest SSA support code and
provides code download capability for the RS/6000 and AIX environments.
LIMITATION: Internal ports on the adapter are not supported. See
machine/model specific information to determine if internal SSA disk
drives and associated hardware/cables are supported.
- Attributes provided: Attachment of SSA devices
- Attributes required: One PCI bus slot
- For 7311-D10: (#6230)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6231) 128 MByte DRAM Option Card
(No Longer Available as of June 24, 2005)
The 128 MByte DRAM Option Card (#6231) is a field only optional
feature to the Advanced SerialRAID Adapter (#6225) or a factory or field
option for the Advanced SerialRAID Plus Adapter (#6230). This option is
recommended for dual initiator fail-over Fast Write Cache (FWC)
configurations. The option increases the existing DRAM on the adapter to
128 MBytes. In this type of dual initiator FWC configuration, the
existing DRAM does not have enough capacity to completely contain a copy
of each adapter's 32 MByte FWC and also provide additional working space.
The 128 MByte DRAM Option Card provides this additional space needed to
contain a full copy of each adapters 32 MByte FWC content and allows for
full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card
(#6231) is not used with dual-initiator FWC configurations, the effective
FWC capacity is reduced to 16 MBytes per adapter.
If this feature is ordered as a field upgrade to an existing
SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software
and publications are also provided.
- Attributes provided: 128 MByte DRAM memory
- Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced
SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card
(#6235) is also recommended.
- For 7311-D10: (#6231)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6235) 32 MByte Fast-Write Cache Option Card
(No Longer Available as of June 24, 2005)
The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast-
write optional feature that plugs into the IBM RS/6000 Advanced
SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus
(#6230). It utilizes non-volatile RAM. During the unlikely event of an
Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID
Adapter can be installed and the fast-write cache can be removed from the
failing adapter and installed in the new adapter insuring data integrity.
The 32 MByte Fast-Write Cache Option Card can provide a significant
improvement of data throughput and response time during certain sequence
write operations compared to SSA RAID adapters without the fast-write
cache. The response time and data transfer improvement using the
optional card will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters. The 32 MByte Fast-Write Cache Option Card plugged into the
Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or
RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write
Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (#
6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single-
initiator or dual initiator configurations.
- Attributes provided: None
- Attributes required: One Advanced SerialRAID Adapter (#6225) or
Advanced SerialRAID Plus Adapter (#6230).
- For 7311-D10: (#6235)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6239) 2 Gigabit Fibre Channel PCI-X Adapter
(No Longer Available as of December 30, 2005)
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gbps or 2 Gbps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber onnector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
(#6278) AC Power Supply, 250W
This feature provides one 250 watt AC power supply for an I/O drawer.
- Attributes provided: One AC power supply
- Attributes required: AC power specify #9172
- For 7311-D10: (#6278)
- Minimum required: 2
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#6313) - Quad Digital Trunk Telephony PCI Blind Swap Adapter
The Quad Digital Trunk Telephony PCI Blind Swap Adapter is a highly
integrated, intelligent IO adapter designed for use in computer telephony
applications. The adapter is a 4 port, full length, universal PCI 2.2
compliant adapter. It performs voice processing for up to four T1 or E1
digital trunks, providing connectivity for 96 (T1) or 120 (E1) voice
channels in a single PCI slot. The adapter is made up of two separate
cards. A base card that interfaces with the host system and performs
telephony processing functions, and a daughter card that provides the
physical interface to the switch. The voice processing function is
provided by WebSphere Voice Response for AIX LPP with Direct Talk
Technology.
In conjunction with this adapter, network attachment cables using
industry standard RJ-48 connector can be obtained from commercial cable
suppliers in a variety of lengths to suit the particular installation.
Additional information about these cables can be obtained by referring to
this adapter's Installation and User's Guide.
Note: When 2 to 4 Quad Digital Trunk Telephony PCI Blind Swap Adapters
(#6313) are ordered and planned to be used in a single partition, the
Artic960RxD Quad DTA, H.100, 4-drop Cable (#2877) is required.
Limitation: The Quad Digital Trunk Telephony PCI Blind Swap Adapter
(#6313) cannot reside in the same system with the IBM ARTIC960RxD Quad
Digital Trunk PCI Adapter (#6310). The Quad Digital Trunk Telephony PCI
Blind Swap Adapter (#6313) is only supported in machines running in a
full system partition.
- Attributes provided: Connection of 1 to 4 T1/E1 Trunk lines.
- Attributes required: One available Blind Swap PCI slot and WebSphere
Voice Response for AIX LPP application software.
- For 7311-D10: (#6313)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6414) Remote I/O Loop Adapter
(No Longer Available as of September 26, 2003)
This feature provides two Remote I/O ports for attaching the I/O
drawer to a server. Up to four I/O drawers can be included in a single
loop.
- Attributes provided: Two Remote I/O ports
- Attributes required: None
- For 7311-D10: (#6414)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#6431) RIO-2 Remote I/O Loop Adapter
This feature provides two RIO-2 Remote I/O ports for attaching the I/O
drawer to a server. Up to four I/O drawers can be included in a single
loop.
- Attributes provided: Two RIO-2 Remote I/O ports
- Attributes required: None
- For 7311-D10: (#6431)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: One Remote I/O adapter is required (#6414 or #6431).
(#7311) Rack Mount I/O Drawer Enclosure, Two Position
The #7311 enclosure provides the mounting hardware required to install
a 7311-D10 I/O drawer in a 7014-T00 or T42 rack. The enclosure can
accommodate two 7311-D10 drawers, side by side, but it may also be used
with only one 7311-D10 drawer installed.
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7311-D10: (#8131)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7311-D10: (#8132)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8133) RJ-45 to DB-25 Converter Cable
This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 7311-D10: (#8133)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a
modified version of the existing 16-port Remote Async Node (feature #8130
or 8134) in an industry-standard 19-inch rack mount chassis to allow
simpler installation and ease-of-use. Like the existing RAN, it can also
be configured as a desktop device.
As an additional benefit, the metal chassis meets FCC Class B/CISPR B
when used with similarly rated RS/6000 host to meet the needs of
customers with these requirements.
The RANs provide 16 ports of EIA-232 capability with full modem
controls on each port and are connected to the 128-port Async Controller
(Micro Channel or ISA versions) residing in the host. RANs are connected
in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either
version).
The rack-mountable RAN offers these enhanced features:
- Industry-standard 19-inch rack mountable chassis (can be configured
for stacking on a desktop or mounted in a 19-inch rack).
- Meets FCC Class B/CISPR B when used with similarly rated RS/6000
host.
- All RJ-45 connectors are now on the front panel, greatly enhancing
cable management.
- The DB-15 synchronous connectors (cabling from host to RAN and
between RANs) and the power cord and switch are located on the rear
panel.
- Power supply is self contained within the unit.
The rack-mountable RAN offers these same features as the existing RAN
product:
- Identical function and support as existing 16-port Remote Async Node
(RAN), feature #8130 or 8134.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel or ISA host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of 62 meters (200
feet).
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer-supplied cables.
- Location of RAN up to 330 meters from the host using standard
shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN
connection
- Attributes required: 1 RAN-to-128-port Controller connection OR 1
RAN-to-RAN connection
- For 7311-D10: (#8136)
- Minimum required: 0
- Maximum allowed: 48 (Initial order maximum: 48)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 7311-D10: (#8137)
- Minimum required: 0
- Maximum allowed: 48 (Initial order maximum: 48)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8453) - Customer Specified Placement, Initial Order Only
This offering allows the customer to order a new initial p5-570 with
the 7311-D11 or 7311-D20 as part of the system and have the ability to
place the hardware within the CEC and the 7311 I/O drawers. The customer
can designate the slot in drawer placement through the process described
in the following Web site:
- http://www-1.ibm.com/servers/eserver/power/csp/
- Attributes provided: Designates the IBM manufacturing
will ship the system to the customer with the hardware placed
within the 7311-D11 and 7311-D20 drawer to the customers specifications.
- Attributes required: The 7311 order has to be part of a p5-570 system
order that has requested Customer Specified Placement (0453 FC). The
8453 FC is not available on stand alone orders for the 7311.
See the following website for process to follow:
- http://www-1.ibm.com/servers/eserver/power/csp/
- For 7311-D10: (#8453)
- Minimum required: 0
- Maximum allowed: (Initial order maximum: 1 )
- OS level required: NA
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P
This feature provides a USB attached US English #103P keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8800)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8801) Quiet Touch Keyboard - USB, Business Black, French, #189
This feature provides a USB attached French #189 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8801)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142
This feature provides a USB attached Italian #142 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8802)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8803) Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129
This feature provides a USB attached German/Austrian #129 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8803)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166
This feature provides a USB attached UK English #166 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8804)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172
This feature provides a USB attached Spanish #172 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8805)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194
This feature provides a USB attached Japanese #194 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8806)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275
This feature provides a USB attached Brazilian Portuguese #275
keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8807)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8808) Quiet Touch Keyboard - USB, Business Black, Canadian French, #058
This feature provides a USB attached Canadian French #058 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8808)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8810) Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch, #120
This feature provides a USB attached Belgian/Dutch #120 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8810)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8811) Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153
This feature provides a USB attached Swedish/Finnish #153 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8811)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8812) Quiet Touch Keyboard - USB, Business Black, Danish, #159
This feature provides a USB attached Danish #159 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8812)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8813) Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
This feature provides a USB attached Bulgarian #442 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8813)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8814) Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G
This feature provides a USB attached Swiss/French/German #150F/G
keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8814)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8816) Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
This feature provides a USB attached Norwegian #155 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8816)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8818) Quiet Touch Keyboard - USB, Business Black, Portuguese, #163
This feature provides a USB attached Portuguese #163 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8818)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8819) Quiet Touch Keyboard - USB, Business Black, Greek, #319
This feature provides a USB attached Greek #319 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8819)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8820) Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
This feature provides a USB attached Hebrew #212 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8820)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8821) Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
This feature provides a USB attached Hungarian #208 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8821)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8823) Quiet Touch Keyboard - USB, Business Black, Polish, #214
This feature provides a USB attached Polish #214 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8823)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
This feature provides a USB attached Slovakian #245 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8825)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243
This feature provides a USB attached Czech #243 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8826)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8827) Quiet Touch Keyboard - USB, Business Black, Turkish, #179
This feature provides a USB attached Turkish #179 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8827)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
This feature provides a USB attached LA Spanish #171 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8829)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8830) Quiet Touch Keyboard - USB, Business Black, Arabic, #238
This feature provides a USB attached Arabic #238 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8830)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8833) Quiet Touch Keyboard - USB, Korean, #413
This feature provides a USB attached Korean #413 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8833)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8834) Quiet Touch Keyboard - USB, Business Black, Chinese/US, #467
This feature provides a USB attached Chinese/US #467 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8834)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445
This feature provides a USB attached French Canadian #445 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8835)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8836) Quiet Touch Keyboard - USB, Business Black, Thai, #191
This feature provides a USB attached Thai #191 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8836)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443
This feature provides a USB attached Russian #443 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8838)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8839) Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105
This feature provides a USB attached Yugoslavian/Latin #105 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8839)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P
This feature provides a USB attached US English #103P (EMEA) keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7311-D10: (#8840)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8841) Mouse - Business Black with Keyboard Attachment Cable
This feature provides a three button mouse and a cable for attachment
to a keyboard.
- Attributes provided: 3-Button Mouse
- Attributes required: Keyboard with Mouse Attachment Port
- For 7311-D10: (#8841)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9004) Southern Hemisphere Designator for Monitors
Specifies that southern hemisphere models are required for all
monitors on the initial plant order or on MES orders.
- Attributes provided: None
- Attributes required: Monitor
- For 7311-D10: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9006) Linux Ready Express Configuration Indicator Feature
Feature #9006 indicates that the I/O drawer is part of an order that
includes a Linux Ready Express Configuration.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9006)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9172) Power Specify, AC
This feature specifies AC power for the system CEC (Central
Electronics Complex) and primary I/O drawer.
- Attributes provided: AC power specify
- Attributes required: none
- For 7311-D10: (#9172)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7311-D10: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9718) Language Group Specify - Turkish
Turkish language group for nomenclature and publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7311-D10: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7311-D10: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9721) Language Group Specify - Russian
Russian language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for nomenclature and standard
publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9724) Language Group Specify - Czech
Czech language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7311-D10: (#9724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9800) Power Cord Specify - United States/Canada
The following countries use the #9800 power cord to power the system
unit and/or peripheral features requiring a power cord.
- DOM U.S.
- 649 CANADA
- 832 SAUDI ARABIA
- 619 BAHAMAS
- 621 BARBADOS
- 627 BERMUDA
- 629 BOLIVIA
- 631 BRAZIL
- 661 COLOMBIA
- 663 COSTA RICA
- 681 DOMINICAN REPUBLIC
- 683 ECUADOR
- 829 EL SALVADOR
- 731 GUATEMALA
- 640 GUYANA
- 735 HONDURAS
- 759 JAMAICA
- 781 MEXICO
- 791 NETHERLANDS ANTILLES
- 811 PANAMA
- 843 SURINAM
- 859 TRINIDAD
- 871 VENEZUELA
- 760 JAPAN
- 761 JAPAN (PDS)
- 766 KOREA
- 818 PHILIPPINES
- 858 TAIWAN
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9802) Power Cord Specify - Brazil (125V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9802)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9820)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9821) Power Cord Specify - Denmark (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9821)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9825) Power Cord Specify - United Kingdom (250V, 13A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9825)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9827) Power Cord Specify - Israel (250V, 6-16A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9827)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9828) Power Cord Specify - Switzerland (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9828)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9830) Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9830)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9831) Power Cord Specify - Australia/New Zealand/Argentina (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9831)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9833) Power Cord Specify - Thailand (250V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9833)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9834) Power Cord Specify - Uruguay (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7311-D10: (#9834)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9901) Power Cord (4M) Specify -- Belgium Finland, France (250V, 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9901)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9902) Power Cord (4M) Specify -- Denmark (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9902)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9903) Power Cord (4M) Specify -- U.K. and Others (250V, 13A)
- Attributes provided: Power Cord
- Attributes required: None
- For 7311-D10: (#9903)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9904) Power Cord (4M) Specify -- Israel (250V, 6-16A)
- Attributes provided: Power Cord
- Attributes required: None
- For 7311-D10: (#9904)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9905) Power Cord (4M) Specify -- Switzerland (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9905)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9906) Power Cord (4M) Specify -- India, Pakistan, S. Africa (250V, 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9906)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9907) Power Cord (4M) Specify -- Italy (250V, 10A and 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9907)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9908) Power Cord (4M) Specify -- Australia/New Zealand/Argentina (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9908)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9909) Power Cord (4M) Specify -- Thailand (250V, 15A)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9909)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9911) Power Cord (4M) Specify -- All (Standard rack power cord)
- Attributes provided: Power cord
- Attributes required: None
- For 7311-D10: (#9911)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2005.
Back to top
|
|
|
|