- LANGUAGES
- (#9300) - Language Group Specify - US English
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9718) - Language Group Specify - Turkish
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- (#9724) - Language Group Specify - Czech
- MISCELLANEOUS
- (#0986) - CCS Customer Service Specify (US)
- SPECIFY CODES
- (#0191) - Rack Content Specify: 7040/61D - 4U
- (#0211) - Rack Content Specify: 7039/651 - 4U, Half Drawer
- (#4651) - Rack Indicator, Rack #1
- (#4652) - Rack Indicator, Rack #2
- (#4653) - Rack Indicator, Rack #3
- (#4654) - Rack Indicator, Rack #4
- (#4655) - Rack Indicator, Rack #5
- (#4656) - Rack Indicator, Rack #6
- (#4657) - Rack Indicator, Rack #7
- (#4658) - Rack Indicator, Rack #8
- (#4659) - Rack Indicator, Rack #9
- (#4660) - Rack Indicator, Rack #10
- (#4661) - Rack Indicator, Rack #11
- (#4662) - Rack Indicator, Rack #12
- (#4663) - Rack Indicator, Rack #13
- (#4664) - Rack Indicator, Rack #14
- (#4665) - Rack Indicator, Rack #15
- (#4666) - Rack Indicator, Rack #16
- POWER
- (#6187) - Power Controller, Four Cooling Fans, Three DC Power
Converter Connections
- RACK RELATED
- (#8690) - Bulk Power Assembly, Redundant
- (#6070) - Front Door, Black with Copper Accent, Primary Rack
- (#6076) - Front Door, Black with Copper Accent, Primary Rack
- (#6079) - Rear Door, Acoustic, Primary Rack
- (#6119) - Front Door, Acoustic, Primary Rack
Special Features - Plant and/or Field Installable
- CABLES
- (#8122) - Attachment Cables, Hardware Management Console to 7040-W42,
6-Meter
- (#8123) - Attachment Cables, Hardware Management Console to 7040-W42,
15-Meter
- POWER
- (#6186) - Bulk Power Regulator
- (#6188) - Power Distribution Assembly, Ten DC Power Converter
Connectors
- (#6200) - Integrated Battery Backup, Primary
- (#6201) - Integrated Battery Backup, Redundant
- (#6241) - Cable, Integrated Battery to Bulk Power Regulator,
Expansion Rack
- (#6242) - Cable, Front Mounted Integrated Battery Backup to rear BPR,
Primary/Expansion Rack
- (#6267) - Power Distribution Jumper Assembly, High Current
- (#6240) - Cable, Integrated Battery Backup to Bulk Power Regulator,
Primary Rack
- LINECORDS
- (#8677) - Line Cord, 8AWG, 14ft, No Plug
- (#8680) - Line Cord, 10AWG, 14ft, IEC309 Plug
- (#8682) - Line Cord, 10AWG, 6ft, Chicago, IEC309 Plug
- (#8686) - Line Cord, 6AWG, 14ft, IEC309 100A Plug
- (#8687) - Line Cord, 6AWG, 6ft, IEC309 100A Plug
- (#8688) - Line Cord, 6AWG/Type W, 14ft, IEC309 60A Plug
- (#8689) - Line Cord, 6AWG/Type W, 6ft, IEC309 60A Plug
- (#8694) - Line Cord, 6AWG, 14ft, No Plug
- MISCELLANEOUS
- (#3754) - Service Tool Kit
- (#3755) - Service Ladder
- (#3756) - Service Tool Kit, High Performance Switch
- RACK RELATED
- (#6071) - Front Door, Sculptured Black, Secondary Rack
- (#6074) - Rear Door, Slim Line, Primary or Secondary Rack
- (#6078) - Rear Door, Slim Line, Primary Rack
- (#6234) - Frame Extender
- (#8691) - Expansion Rack, 24", 42U
- SPECIFY CODES
- (#0212) - Rack Content Specify: 7045/SW4 - 4U
Feature Descriptions
(#0191) Rack Content Specify: 7040/61D - 4U
Indicator of rack space utilization for 7040/61D I/O Drawer
- Attributes provided: Indicator of rack space utilization
- Attributes required: 4U of rack space
- For 7040-W42: (#0191)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#0211) Rack Content Specify: 7039/651 - 4U, Half Drawer
Indicator of rack space utilization for 7039/651 CEC.
- Attributes provided: Indicator of rack space utilization
- Attributes required: 4U of rack space in one half drawer
- For 7040-W42: (#0211)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#0212) Rack Content Specify: 7045/SW4 - 4U
Indicator of rack space utilization for 7045/SW4.
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#0986)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#3754) Service Tool Kit
This feature delivers the Service Took Kit and Service Tray for the
p655 server. Remove this feature from additional 7040-W42 rack orders
with 7039-651 p655 CECs to prevent multiple quantities of the Tool Kit
and Service Tray from being shipped. Every p655 installation location
must have access to one Service Tool Kit/Service Tray. Failure to have
at least one available in a location may result in delayed or prolonged
maintenance times.
(#3755) Service Ladder
This feature delivers the Service Ladder for components within the
higher drawers of the 7040-W42 rack. Remove this feature from additional
7040-W42 rack orders to prevent multiple quantities of the Service Ladder
from being shipped. Also remove this feature if RPQ 8A1173 "Compact
Handling Option" is ordered. Every 7040-W42 installation location with
components within the higher drawers of the rack must have access to one
Service Ladder. Failure to have at least one available in a location may
result in delayed or prolonged maintenance times.
- Attributes provided: Service Ladder for 7040-W42
- Attributes required: 7040-W42 rack
- For 7040-W42: (#3755)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Note: The Service Ladder FC 3755 should be assigned once when the FC 3803
is ordered, as either an initial order or an MES. FC 3755 can be removed
from the order to prevent multiple shipment of Service Ladders per
installation. The FC should be removed from the initial order if RPQ
8A1173 Compact Handling Option is ordered.
(#3756) Service Tool Kit, High Performance Switch
This feature delivers the Service Took Kit for the High Performance
Switch.
Remove this feature from additional 7045-SW4 orders to prevent
multiple quantities of the Tool Kit from being shipped.
Every installation location with an HPS 7045-SW4 must have access to
one Service Tool Kit. Failure to have at least one available in a
location may result in delayed or prolonged maintenance times.
(#4651) Rack Indicator, Rack #1
This indicator is used to specify the first rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the first rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4651)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4652) Rack Indicator, Rack #2
This indicator is used to specify the second rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the second rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4652)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4653) Rack Indicator, Rack #3
This indicator is used to specify the third rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the third rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4653)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4654) Rack Indicator, Rack #4
This indicator is used to specify the fourth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fourth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4654)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4655) Rack Indicator, Rack #5
This indicator is used to specify the fifth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fifth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4655)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4656) Rack Indicator, Rack #6
This indicator is used to specify the sixth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the sixth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4656)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4657) Rack Indicator, Rack #7
This indicator is used to specify the seventh rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the seventh rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4657)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4658) Rack Indicator, Rack #8
This indicator is used to specify the eighth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the eighth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4658)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4659) Rack Indicator, Rack #9
This indicator is used to specify the ninth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the ninth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4659)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4660) Rack Indicator, Rack #10
This indicator is used to specify the tenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the tenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4660)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4661) Rack Indicator, Rack #11
This indicator is used to specify the eleventh rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the eleventh rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4661)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4662) Rack Indicator, Rack #12
This indicator is used to specify the twelfth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the twelfth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4662)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4663) Rack Indicator, Rack #13
This indicator is used to specify the thirteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the thirteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4663)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4664) Rack Indicator, Rack #14
This indicator is used to specify the fourteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fourteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4664)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4665) Rack Indicator, Rack #15
This indicator is used to specify the fifteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fifteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4665)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4666) Rack Indicator, Rack #16
This indicator is used to specify the sixteenth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the sixteenth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7040-W42: (#4666)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6070) Front Door, Black with Copper Accent, Primary Rack
This feature provides a sculptured black front door with copper accent
for installation on the primary rack containing the system CEC
(Central Electronics Complex).
- Attributes provided: Front Door for Primary System Rack
- Attributes required: None
- For 7040-W42: (#6070)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#6071) Front Door, Sculptured Black, Secondary Rack
(No Longer Available as of December 10, 2004)
This feature provides a sculptured black front door for installation
on a secondary rack which does not contain a system CEC (Central
Electronics Complex).
(#6074) Rear Door, Slim Line, Primary or Secondary Rack
(No Longer Available as of November 18, 2005)
This feature provides a black rear door for installation on the
primary rack containing the system CEC (Central Electronics Complex)
or on a secondary rack. This door provides a minimized footprint for
use in environments where conservation of space is required.
- Attributes provided: Rear Door for Primary System Rack
- Attributes required: None
- For 7040-W42: (#6074)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6076) Front Door, Black with Copper Accent, Primary Rack
(No Longer Available as of November 18, 2005)
This feature provides a sculptured black front door with copper accent
for installation on the primary rack containing the system CEC (Central
Electronics Complex).
(#6078) Rear Door, Slim Line, Primary Rack
(No Longer Available as of November 18, 2005)
This feature provides a black rear door for installation on the
primary rack containing the system CEC (Central Electronics Complex).
This door provides a minimized footprint for use in environments where
conservation of space is required.
(#6079) Rear Door, Acoustic, Primary Rack
(No Longer Available as of November 18, 2005)
This feature provides a rear black door for installation on a primary
rack which contains a system CEC (Central Electronics Complex). This
door provides additional acoustic dampening for use where a quieter
environment is desired.
(#6119) Front Door, Acoustic, Primary Rack
(No Longer Available as of November 18, 2005)
This feature provides a sculptured black front acoustic door with
copper accent for installation on the primary rack containing the system
CEC (Central Electronics Complex).
(#6186) Bulk Power Regulator
Bulk power regulators provide increments of power for use by the
systems components such as fans, CEC components, and I/O drawers.
- Attributes provided: Regulated Power
- Attributes required: Bulk power assembly.
- For 7040-W42: (#6186)
- Minimum required: 2
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6187) Power Controller Assembly
This power controller provides the base power connections for the
internal power cables.
(#6188) Power Distribution Assembly, Ten DC Power Converter Connectors
This Power distribution assembly provides ten connector locations for
cable attachment of I/O drawer and CEC DC power converters.
(#6200) Integrated Battery Backup, Primary
The Primary Integrated Battery Backup features provide batteries to be
connected to the bulk power regulators of the front bulk power assembly.
These batteries protect against power line disturbances as well as power
failures involving both redundant power sources or the front power source
and the rear bulk power assembly. The batteries provide sufficient
backup power to allow an orderly system shutdown.
(#6201) Integrated Battery Backup, Redundant
The Redundant Integrated Battery Backup features provide batteries to
be connected to the bulk power regulators of the rear bulk power
assembly. These batteries protect against power line disturbances as
well as power failures involving both redundant power sources. They also
protect against failure of both power sources at the same time as a
failure of the primary battery backup or the front bulk power assembly.
The batteries provide sufficient backup power to allow an orderly system
shutdown.
(#6234) Frame Extender
This frame extender feature provides cable management for the
7040-W42 in the non-CEC, multi drawer application, when 3 or more
drawers are installed. The frame extender can also be ordered with
less than three drawers to ease upgrade rework. If the expansion
rack #8691 is in the configuration, it also requires a frame
extender #6234 if there is a Frame Extender (#6234) on the 7040-W42
rack.
- Attributes provided: Frame extender for cable management
- Attributes required: Non-CEC version of 7040-W42 or #8691 on
7040-W42 Rack.
- For 7040-W42: (#6234)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Note: For non-CEC applications of the 7040-W42 with 3 or more
drawers, #6234 is assigned by the configurator. If there are more
than 2 HPSs and fewer than 32 copper cables within the multi-switch
rack application, then the Frame Extender (#6234) may be
deselected in the configurator. This is to allow large configurations
with a high density of fiber cables to minimize the multi-switch rack
footprint.
(#6240) Cable, Integrated Battery Backup to Bulk Power Regulator, Primary Rack
This cable provides a connection between the integrated battery backup
features located in the primary rack and the bulk power regulators
located in the front and rear bulk power assemblies. One cable is
required for each primary and redundant integrated battery backup feature
installed in the primary rack.
- Attributes provided: Battery Backup Attachment Cable
- Attributes required: Primary or Redundant Integrated Battery Backup
Features.
- For 7040-W42: (#6240)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Note: In non-CEC multi drawer applications, the quantity is
limited to 2.
(#6241) Cable, Integrated Battery to Bulk Power Regulator, Expansion
(No Longer Available as of December 10, 2004)
Rack
.This cable provides a connection between the integrated battery
backup features located in the expansion rack and the bulk power
regulators located in the front and rear bulk power assemblies. One
cable is required for each primary and redundant integrated battery
backup feature installed in the expansion rack.
- Attributes provided: Battery Backup Attachment Cable
- Attributes required: Primary or Redundant Integrated Battery
Backup Features.
- For 7040-W42: (#6241)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6242) Cable, Front Mounted Integrated Battery Backup to rear BPR,
Primary/Expansion Rack
This cable provides a connection between the front mounted integrated
battery backup features (#6200)located in the primary and expansion
rack and the bulk power regulators located in the rear bulk power
assemblies.
- Attributes provided: Battery Backup Attachment Cable
- Attributes required: Front Mounted Integrated Battery Backup
Feature connected to rear Bulk Power Regulator.
- For 7040-W42: (#6242)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6244) EMC Skirts/Tailgate for 7040-W42
(No Longer Available as of November 18, 2005)
#6244 is used when the High Performance Switch, 7045-SW4, is
installed in the rack type 7040-W42 in EIA position #4601. It
is also used for rack configurations that have the p655 server SNI
feature #6420. #6244 drives the rack level EMC skirts/tailgate parts
for the 7040-W42. For multiple switch applications, if there is an
expansion rack #8691 without the frame extender #6234, then the
expansion rack also requires a #6244.
- Attributes provided: EMC Skirts/Tailgate for 7040-W42
- Attributes required: 7045-SW4 or #6420
- For 7040-W42: (#6244)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6267) Power Distribution Jumper Assembly, High Current
This feature provides a power distribution jumper assembly and cables
for high current applications to enable the power output load sharing at
the frame level.
- Attributes provided: Power Distribution Jumper assembly/cables
- Attributes required: High current frame configuration
- For 7040-W42: (#6267)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8120) Attachment Cable, Hardware Management Console to Host, 6-Meter
This 6-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a 9-pin
female connector for HMC connection and a 9-pin male connection to
attach to the HMC port on the host system. A 9-pin to 25-pin adapter is
also provided.
- Attributes provided: 6-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7040-W42: (#8120)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8121) Attachment Cable, Hardware Management Console to Host, 15-Meter
This 15-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a 9-pin
female connector for HMC connection and a 9-pin male connection to
attach to the HMC port on the host system. A 9-pin to 25-pin adapter is
also provided.
- Attributes provided: 15-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7040-W42: (#8121)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8122) - ATTACHMENT CABLES, HARDWARE MANAGEMENT CONSOLE TO 7040-W42/61R, 6-Meter
These 6-meter cables provide an asynch connection between the
HMC (Hardware Management Console) and the7040-W42 or 7040-61R
power system. A pair of RS-422 to EIA 232 converters are
included with this feature.
- Attributes provided: Two 6-meter HMC attachment cables and two
RS-422 to EIA 232 converters.
- Attributes required: Two empty RS-422 asynch ports attached to an
HMC, or two empty EIA 232 asynch ports attached to an HMC.
- For 7040-W42: (#8122)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8123) - ATTACHMENT CABLES, HARDWARE MANAGEMENT CONSOLE TO 7040-W42/61R, 15-Meter
These 15-meter cables provide an asynch connection between the HMC
(Hardware Management Console) and the 7040-W42 or 7040-61R power system.
A pair of RS-422 to EIA 232 converters are included with this feature.
- Attributes provided: Two 15-meter HMC attachment cables and two
RS-422 to EIA 232 converters.
- Attributes required: Two empty RS-422 asynch ports attached to an
HMC, or two empty EIA 232 asynch ports attached to an HMC.
- For 7040-W42: (#8123)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8677) Line Cord, 8AWG, 14ft, No Plug
This feature provides a 14 ft 8AWG line cord with no plug. It may
be utilized for 200-415V circuits at loadings up to 40 A.
(#8680) Line Cord, 10AWG, 14ft, IEC309 Plug
This feature provides a 14 ft, 10AWG line cord equipped with an IEC
309 plug. It may be utilized for 30A, 480VAC circuits.
- Attributes provided: 14 ft Line Cord with IEC309 Plug
- Attributes required: None
- For 7040-W42: (#8680)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8682) Line Cord, 10AWG, 6ft, Chicago, IEC309 Plug
This feature provides a 6 ft, 10AWG line cord equipped with an IEC 309
plug. It may be utilized for 30A, 480VAC circuits.
- Attributes provided: 6 ft Line Cord with IEC309 Plug
- Attributes required: None
- For 7040-W42: (#8682)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8686) Line Cord, 6AWG, 14ft, IEC309 100A Plug
This feature provides a 14 ft, 6AWG line cord equipped with an IEC309
100A plug. It provides connection to an 80A, 240VAC circuit.
(#8687) Line Cord, 6AWG, 6ft, IEC309 100A Plug
This feature provides a 6 ft, 6AWG line cord equipped with an IEC309
100A plug. It provides connection to an 80A, 240VAC circuit.
(#8688) Line Cord, 6AWG/Type W, 14ft, IEC309 60A Plug
This feature provides a 14 ft, 6AWG/Type W line cord equipped with a
60A IEC309 plug. It provides connection to a 60A, 240VAC circuit.
(#8689) Line Cord, 6AWG/Type W, 6ft, IEC309 60A Plug
This feature provides a 6 ft, 6AWG/Type W line cord equipped with a
60A IEC 309 plug. It may be utilized for 60A, 240VAC circuits.
(#8690) Bulk Power Assembly, Redundant
This feature provides two bulk power assemblies for redundant power.
These bulk power assemblies mount in the front and the back of the
primary rack and utilize 8U of space.
- Attributes provided: Redundant Bulk Power
- Attributes required: 8U Rack Space
- For 7040-W42: (#8690)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8691) Expansion Rack, 24", 42U
(No Longer Available as of December 10, 2004)
This expansion rack feature provides an additional 42U of 24" rack
space. When installed, one side cover of the 7040-61R rack is
removed, the expansion rack is bolted to the 7040-61R rack, and the
side cover is placed on the expansion rack. Devices mounted in the
expansion rack feature utilize power provided by the base 7040-61R
rack. #8691 is also available on the 7040-W42 in the non-CEC, multi
drawer application.
- Attributes provided: 42U of 24" Rack Space
- Attributes required: 7040-61R or 7040-W42 Rack
- For 7040-W42: (#8691)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Note: #8691 on the 7040-W42 is only available with the non-CEC
version of the primary rack 7040-W42.
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8694) Line Cord, 6AWG, 14ft, No Plug
This feature provides a 14 ft 6AWG line cord with no plug. It may be
utilized for 200-415V circuits at loadings up to 63A.
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7040-W42: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9718) Language Group Specify - Turkish
Turkish language group for nomenclature and publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7040-W42: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7040-W42: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9721) Language Group Specify - Russian
Russian language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for nomenclature and standard
publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9724) Language Group Specify - Czech
Czech language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7040-W42: (#9724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2005.
Back to top
|
|
|
|