7039-651 IBM eServer pSeries 655 Server Model 651

IBM U.S. Sales Manual
Revised: October 04, 2005.

Table of contents Document options IBM U.S. Product Life Cycle Dates Technical Description Abstract Publications Highlights Features -- Specify/Special/Exchange Description Accessories Product Positioning Machine Elements Model Supplies

IBM U.S. Product Life Cycle Dates

Type Model	Announced	Available	Marketing Withdrawn	Service Discontinued	Replaced By
7039-651	2002/11/12	2002/12/13	2005/10/07	-	-

Abstract

IBM UNIX systems consist of the IBM eServer pSeries and IBM RS/6000 product lines. Providing unprecedented value, these innovative systems feature IBM's leading-edge technology and run the top-rated UNIX operating system, AIX. This broad product line ranges from powerful workstations ideal for mechanical design; to mission-critical symmetric multiprocessing (SMP) servers for ERP, SCM, CRM, transaction processing, and Web serving; up to parallel RS/6000 SP systems that can handle demanding scientific and technical computing and business intelligence tasks. These platforms provide the power to create change and the flexibility to manage it, with thousands of applications that provide real value. More than 1,000,000 systems have shipped to over 135,000 businesses worldwide.

Model Abstract 7039-651

(No Longer Available as of October 7, 2005)

The IBM eServer pSeries 655 (7039-651) is the latest in a family of products within IBM's UNIX, 64-bit, symmetric multiprocessing (SMP) servers. The pSeries 655 offers a super-dense package (up to 128 processors in a single frame), ideal for many high-performance computing and business intelligence applications.

Based on IBM's leadership POWER4 Technology, the p655 is designed for medium to large customers whose workloads are best managed with a clustered server solution.

Packaged in scalable, single multi-chip module (MCM)-based thin nodes, within a half-drawer, 4U form factor, up to sixteen p655s can be installed within a frame, capable of delivering over 1/2 peak TFlop of clustered performance within that single frame.

With PSSP, over 10 years of cluster management technology is delivered to the p655. You benefit from leadership administration at lower costs.

The p655 server can be interconnected to the SP Switch2 fabric using the SP Switch2 PCI-X adapter as a stand-alone cluster, or as an additional building block of the IBM eServer Cluster 1600.

The p655 can be partitioned into four Logical Partitions (LPARs), either switched or non-switched for greater flexibility.

Within the 7040-W42 frame for the p655, the 7040-61D I/O drawer offers expansion of up to 20 blind-swap PCI bus slots and up to 16 additional Ultra3 SCSI disks per server that can be hot-plugged.

The IBM eServer Cluster 1600 is enhanced to include the p655 server within the available cluster building blocks. This new server is now available as both an initial option and a field addition to the IBM eServer Cluster 1600.
Back to top

Highlights

IBM Innovative Technology -- A Top Performing Cluster Optimized UNIX Server Featuring:

IBM SOI/copper chip technology
Mainframe-inspired LPAR and self-managing capabilities
Cost-efficient growth path to the future

Attributes include:

64-bit system scalability in a 4U, half-drawer server with either:
- 4-way 1.7 GHz MCM, high memory bandwidth processors
- 8-way 1.5 GHz MCM, dual core implementation for greater density
- 4-way 1.3 GHz MCM, high memory bandwidth processors
- 8-way 1.1 GHz MCM, dual core implementation for greater density
- 128 MB of L3 ECC cache per MCM
POWER4+ System memory expandable to 64 GB per server through RPQ 8A1232 for commercial applications.
Three PCI-X I/O slots per server
Two Ultra3 SCSI hot-plug disks per server
One 7040-61D I/O drawer supported per server; each I/O drawer supports 20 blind-swap PCI bus slots and up to 16 Ultra3 SCSI disks that can be hot-plugged
Hardware that can be partitioned into four LPARs (switched or non- switched), each functioning as a "computer within a computer" with its instance of the operating system,

Description

Innovative Technology

This product further extends IBM's server family building upon the POWER4 technology, specifically focused within the high-performance computing and business intelligence areas.

Designed for the self-managed environment with high levels of reliability, availability, and serviceability (RAS) capability:
- Self-configuring; disk and PCI
- Self-healing; Chipkill memory, memory bit scrubbing, dynamic deallocation of processors, memory cache, PCI bus, and LPAR
- Self-optimizing; Workload Manager, LPAR
- Self-protecting; cryptographic coprocessors, digital certificates, Kerberos
Leadership technology
- Copper and silicon-on-insulator (SOI) helps produce faster chips that run cooler
- POWER4, the first SMP on a chip with dual microprocessors
- Up to 1.3 GHz and POWER4+ up to 1.7 GHz, 64-bit processors.
Flexible configurations

SMP, LPAR, Clusters

The pSeries 655 is a densely packaged, cluster-optimized server, available as a stand-alone SMP server, or fully managed as a cluster through PSSP software. The combination of LPAR, common CEC hardware, platform-optimized I/O drawers, a common hardware management console, common switch fabric, and attachment adapters enable customers with new levels of flexibility and scalability not previously available from IBM.

IBM anticipates that one or more Linux distributors will support 64-bit Linux in the first half of 2003. For more information about Linux running on IBM eServer pSeries systems, consult:

http://www.ibm.com/servers/eserver/pseries/linux.

Linux for pSeries is available directly from the Linux distributors.

pSeries

The pSeries is the powerful, technologically advanced family of UNIX servers. pSeries systems meet a diverse set of needs scaling from small departmental and distributed systems to massively parallel supercomputers. Each pSeries system features IBM's UNIX operating system AIX 5L, the most open UNIX with Linux affinity.

The ultra-powerful pSeries 655 sets the standard for supercomputing class UNIX servers with its mainframe-heritage LPAR and selfmanaging features.

The p655 is the latest system to offer the POWER4+ microprocessor. The POWER4+ chip is a dual processor SMP on a single piece of silicon. It owes its advanced performance to IBM's SOI and copper fabrication technology.

The system features include:

Full 64-bit implementation
AIX 5L V5.1, AIX 5L V5.2, and HACMP support
POWER4+ processors operating at 1.5 GHz (8-way) or 1.7 GHz (4-way)
POWER4 processors operating at 1.1 GHz (8-way) or 1.3 GHz (4-way)
Up to 32 GB memory
Two hot-plug disk bay, for a pair of 18.2 GB, 36.4 GB, 73.4 GB, or 146.8 GB disks
Three hot-plug capable PCI-X slots
Two integrated 10/100 Ethernet ports
Two integrated serial ports for HMC connection
Two remote I/O ports to connect the 7040-61D I/O drawer
L2 and L3 ECC caches
Up to four LPARs, switched or non-switched
Service processor for RAS
First failure data capture
Self-diagnosing and healing features
IBM Hardware Management Console for pSeries (HMC)

The pSeries 655 can be configured with a 7040-61D I/O Drawer. The I/O drawer can contain up to 16 hot-swap capable disks structured into four 4-packs of 18.2 GB, 36.4 GB, 73.4 GB, or 146.8 GB disks.

The drawer contains two planars with 10 slots/planar, 20 slots/drawer. The slots are hot-plug capable to permit PCI adapters to be added or replaced without extending the I/O drawer, all while the system remains available to the customer. PCI-X planars in the 7040-61D I/O Drawer, with RIO-2 connectivity, are supported on the POWER4+ version of the 7039-651.

For unmatched UNIX system performance and scalability, up to 32 p655 Central Electronic Complexes (CECs) can be connected within a cluster environment. To help customers consolidate workloads, the CECs can be split into as many as two LPARs.

Complementing the power of the pSeries 655 are the extraordinary self- managing capabilities. The system can detect faulty memory, processors, cache and PCI buses, and dynamically take them offline. It even makes the service call. All of this without requiring administrative action or interrupting operations. Growth is easy with hot-plug PCI. For the ultimate in availability, the systems can be clustered together with high-availability cluster multiprocessing software.

Dynamic Logical Partitioning

Dynamic logical partitioning (dynamic LPAR) allows system resources to be easily and quickly configured across multiple logical partitions (LPARs).
Dynamic LPAR can be used to add newly activated Capacity Upgrade on Demand processors into the p690 configuration without requiring a system re-boot.
The following are required for dynamic LPAR:
- AIX 5L for POWER Version 5.2 or later
- Hardware Management Console for pSeries with Version 1.0 Release 3 or later software

Self-Managing Systems

IBM designs IBM eServer systems to be self-managing so you can concentrate on your business and technical computing needs.

The IBM autonomic computing initiative is IBM's blueprint for self- managing systems. The goal is to use technology to manage technology and create an intelligent, self-managing IT infrastructure that minimizes complexity. You can manage environments hundreds of times more complex and more broadly distributed than exist today.

IBM autonomic computing initiative systems will allow you to grow your computing resources without increasing critical staff and costs to manage larger more complex computer networks.

This all-encompassing strategy addresses the self-management needs in four areas:

Self-configuring -- systems can be reconfigured or expanded without interrupting operations
Self-healing -- systems can detect impending problems and correct them automatically to keep systems going and lower administrative expense
Self-optimizing -- systems can balance resources and workloads dynamically to maximize responsiveness and throughput
Self-protecting -- systems can help protect transactions and enterprise data

I/O Drawer

Previously introduced on the p690 server, the p655 utilized the common hardware of the 7040-61D I/O drawer to provide PCI adapter slots and internal disk capabilities. The Model 61D is a 4U drawer that mounts in the 24-inch 7040-W42 System Rack and connects to the system CEC via remote I/O cables.

Each Model 61D I/O drawer provides up to twenty blind swap PCI slots and sixteen hot-swap disk bays. The Model 61D utilizes redundant power converters and power cabling to help ensure high reliability and availability. It utilizes 350 V bulk power supplied from the 7040-W42 system rack.

PCI-X planars in the 7040-61D I/O Drawer, with RIO-2 connectivity, are supported on the POWER4+ version of the 7039-651.

System Rack

The 7040-W42 System Rack provides space for mounting system drawer components for pSeries 655 servers the 7040-61D I/O drawers. The Model W42 is a 24-inch rack that provides 42U of rack space.

The 7040-W42 utilizes a 350 V DC bulk power subsystem to provide power for the components within the rack. The bulk power subsystem incorporates redundant bulk power assemblies mounted in the front and rear sections of the top 8U of the rack.

RAS Features and Functions

Excellent quality and reliability features are the keys to all facets of IBM eServer pSeries products. The measures taken help ensure the products operate when required, perform reliably, efficiently handle infrequent failures in a nondisruptive fashion, and provide timely and competent repair to allow resumption of operations with minimal inconvenience.

Reliability begins with the development of architectures, where RAS innovations are of paramount importance. The reliability concept flows through design and product development stages, where RAS designs are reviewed, assessed, developed, evaluated, and optimized. It continues through the manufacturing and release processes, where the manufacturing quality is extensively measured and is under continual evaluation. It culminates in service and support, where:

Reliability is consistently monitored for deviation from the criteria.
Warranty and maintenance have high priority.
Significant customer problems are assigned to and addressed by an expert team.

IBM eServer pSeries 655 system processes, from the architectural and concept phases of development through the provision of service and support, are ISO certified and audited periodically for ISO compliance by representatives of Underwriters Laboratories.

Section 508 of the U.S. Rehabilitation Act
Back to top

Product Positioning

The pSeries 655 is designed to offer leadership performance for a dense cluster optimized server package, targeted for High Performance Computing (HPC) and Business Intelligence (BI) customers within the UNIX server environment. Designed for the medium to large customer whose workloads are best managed with a clustered-server solution, the p655 provides flexibility and scalability. Additional upside opportunity includes current SP customers outside HPC/BI looking to upgrade, expand, or integrate more compute power for workload consolidation or enterprise applications.
Based on IBM's advanced POWER4 microprocessor technology with up to 1.3 GHz, 64-bit processor speed, copper and SOI technology, the p655 offers high performance in a dense package with favorable price/performance characteristics, allowing up to 128 processors in a single frame.
pSeries 655 systems configured with 4-way, high-memory-bandwidth processor MCMs (#5513 or #5518)) may be especially attractive to customers in the high-performance computing environment. This configuration provide twice the amount of Level 2 and Level 3 cache, and additional memory bandwidth per processor when compared to systems configured with 8-way processor MCMs.
This additional cache and memory bandwidth available for each processor in this configuration may provide significantly higher performance per processor for certain engineering and technical environment applications.
Back to top

Model

Model Summary Matrix

Model System Memory L3 ECC cache

651 Up to 32 GB 128 MB

Customer Setup (CSU)

None.
Devices Supported

|6| X = SUPPORTED DEVICE |5| |1| MT-MOD | | DESCRIPTION ---------|-|----------------------------------------- ---------+-+--------SWITCH--------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2031-016 |X| McDATA Model 016 Departmental ES-3032 Fabric Switch 2031-032 |X| McDATA Model 032 Departmental ES-3032 Fabric Switch 2031-216 |X| McData ES-3216 Fabric Switch 2031-232 |X| McData ES-3232 Fabric Switch 2031-L00 |X| McDATA Model L00 ES-1000 Loop Switch 2032-001 |X| McDATA ED-5000 Enterprise Fibre Channel Switch 2032-064 |X| McDATA Model 064 Enterprise Fibre Channel Director 2042-001 |X| Inrange FC/9000 64-port Fibre Channel Director 2042-128 |X| Inrange FC/9000 128-port Fibre Channel Director 2042-256 |X| INRANGE FC/9000-256 FC Director 2109-F16 |X| IBM TotalStorage SAN Switch Model M16 2109-M12 |X| IBM TotalStorage SAN Switch Model M12 2109-S08 |X| IBM SAN Fibre Channel Switch Model S08 2109-S16 |X| IBM SAN Fibre Channel Switch Model S16 3534-F08 |X| IBM TotalStorage Storage Area Network (SAN) Model F08 7045-SW4 |X| IBM pSeries High Performance Switch | | ---------+-+--------DISK----------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2101-100 |X| Seascape Solutions Rack 2102-D00 |X| IBM Expandable Storage Unit 2102-F10 |X| IBM Fibre Channel Raid Storage Server 2103-H07 |X| Fibre Channel Storage Hub 2104-DL1 |X| IBM Expandable Storage Plus Model DL1 2104-DU3 |X| Expandable Storage Plus Model DU3 2104-TL1 |X| IBM Expandable Storage Plus Model TL1 2104-TU3 |X| Expandable Storage Plus Model TU3 2105-800 |X| TotalStorage Enterprise Storage Server Model 800 2105-E10 |X| IBM Enterprise Storage Server Model E10 2105-E20 |X| IBM Enterprise Storage Server Model E20 2105-F10 |X| IBM Enterprise Storage Server Model F10 2105-F20 |X| IBM Enterprise Storage Server Model F20 7027-HSC |X| IBM High Capacity Drawer Model HSC 7027-HSD |X| IBM High Capacity Drawer Model HSD 7131-105 |X| IBM Multi-Storage Tower Model 105 7131-405 |X| IBM Multi-Storage Tower Model 405 7133-010 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem | | Model 010 7133-020 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem | | Model 020 7133-500 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem | | Model 500 7133-600 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem 7133-D40 |X| IBM Serial Disk System Advanced Model D40 7133-T40 |X| IBM Serial Disk System Advanced Model T40 7134-010 |X| High Density SCSI Disk Subsystem 7135-210 |X| IBM RAIDiant Array Model 210 7137-412 |X| IBM Disk Array Subsystem Model 412 7137-413 |X| IBM Disk Array Subsystem Model 413 7137-414 |X| IBM Disk Array Subsystem Model 414 7137-415 |X| IBM Disk Array Subsystem Model 415 7137-512 |X| IBM Disk Array Subsystem Model 512 7137-513 |X| IBM Disk Array Subsystem Model 513 7137-514 |X| IBM Disk Array Subsystem Model 514 7137-515 |X| IBM Disk Array Subsystem Model 515 7203-001 |X| IBM RS/6000 External Portable Disk Drive Model 001 7204-001 |X| 1 GB Disk Drive 7204-010 |X| 1 GB Disk Drive 7204-112 |X| 1.1 GB Fast/Wide Disk Drive 7204-113 |X| IBM RS/6000 External Disk Drive Model 113 7204-114 |X| IBM RS/6000 External Disk Drive Model 114 7204-118 |X| IBM 7204 18.2 GB External Disk Drive Model 118 7204-139 |X| IBM RS/6000 External Disk Drive Model 139 7204-215 |X| 2 GB Differential Disk Drive 7204-315 |X| IBM RS/6000 External Disk Drive Model 315 7204-317 |X| IBM RS/6000 External Disk Drive Model 317 7204-320 |X| 320 MB Disk Drive 7204-325 |X| IBM RS/6000 External Disk Drive Model 325 7204-339 |X| IBM RS/6000 External Disk Drive Model 339 7204-402 |X| IBM External Disk Drive Model 402 7204-404 |X| IBM External Disk Drive Model 404 7204-409 |X| IBM 9.1 GB External Disk Drive Model 409 7204-418 |X| IBM 7204-418 18GB DE External Disk Drive 7204-419 |X| IBM 18.2 GB External Disk Drive Model 419 7204-518 |X| IBM 7204 18 GB External Disk Drive 7204-536 |X| IBM 7204 36 GB External Disk Drive | | ---------+-+--------DISPLAYS------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 6546-00E |X| G52 Display 6546-00N |X| G52 Display 6546-01E |X| G52 Display 6546-01S |X| G52 Display 6546-0AE |X| G54 Display 6546-0AN |X| G54 Display 6546-0BE |X| G54 Display 6546-0BN |X| G54 Display 6546-0BS |X| G54 Display 6546-21N |X| G52 Display 6546-2BN |X| G54 Display 6546-31N |X| G52 Display 6546-4AN |X| G54 Display 6546-6BN |X| G54 Display 7315-C01 |X| IBM Hardware Management Console 7315-C02 |X| IBM Hardware Management Console 9419-HB7 |X| IBM ThinkVision L191p 19-inch LCD Flat-panel Monitor | | ---------+-+--------STORAGE NETWORK DEVICES---------- - - - - -|-|- - - - BUS CONVERTER - - - - - - - - - - 2108-G07 |X| IBM Storage Area Network Data Gateway Model G07 - - - - -|-|- - - - ROUTER- - - - - - - - - - - - - - 2108-R03 |X| IBM Storage Area Network Data Gateway Model R03 | | ---------+-+--------SCSI DEVICES--------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 3995-063 |X| Optical Library Dataserver (2 Drives) 3995-163 |X| Optical Library Dataserver (4 Drives) 3995-A63 |X| Optical Library Dataserver (1 Drive) 3995-C60 |X| IBM Optical Library Dataserver 3995-C62 |X| IBM Optical Library Dataserver 3995-C64 |X| IBM Optical Library Dataserver 3995-C66 |X| IBM Optical Library Dataserver 3995-C68 |X| IBM Optical Library Dataserver 7209-003 |X| IBM Multifunction Optical Disk Drive Model 003 7210-025 |X| 4.7GB DVDRAM Drive | | ---------+-+--------TAPE----------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 3490-C11 |X| IBM Magnetic Tape Subsystem Model C11 3490-C1A |X| IBM Magnetic Tape Subsystem Family Model C1A 3490-C22 |X| IBM Magnetic Tape Subsystem Model C22 3490-C2A |X| Magnetic Tape Subsystem 3490-E01 |X| IBM Magnetic Tape Subsystem Model E01 3490-E11 |X| IBM Magnetic Tape Subsystem Model E11 3490-F00 |X| IBM Magnetic Tape Subsystem Model F00 3490-F01 |X| IBM Magnetic Tape Subsystem Model F01 3490-F11 |X| IBM Magnetic Tape Subsystem Model F11 3490-F1A |X| Magnetic Tape Subsystem * 18/36 track, 3494 att, 1 drive, | | 2.4GB 3490-FC0 |X| IBM Rack Model FC0 3494-B10 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B10 3494-B18 |X| IBM Magstar Virtual Tape Server Model B18 3494-B20 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B20 3494-D10 |X| IBM Magstar Tape Library Model D10 3494-D12 |X| IBM Magstar Tape Library Model D12 3494-D14 |X| Tape Library Dataserver (Tape Drive Unit) 3494-HA1 |X| IBM Magstar 3494 High Availability Unit Model HA1 3494-L10 |X| IBM Magstar Tape Library Model L10 3494-L12 |X| IBM Magstar Tape Library Model L12 3494-L14 |X| IBM Magstar Tape Library Model L14 3494-S10 |X| IBM Magstar Tape Library Model S10 3570-B00 |X| IBM Magstar MP Tape Subsystem Model B00 3570-B01 |X| IBM Magstar MP Tape Subsystem Model B01 3570-B02 |X| IBM Magstar MP Tape Subsystem Model B02 3570-B11 |X| IBM Magstar MP Tape Subsystem Model B11 3570-B12 |X| IBM Magstar MP Tape Subsystem Model B12 3570-B1A |X| IBM Magstar MP Tape Drive Model B1A 3570-C00 |X| IBM Magstar MP Tape Drive Model C00 3570-C01 |X| IBM Magstar MP Tape Drive Model C01 3570-C02 |X| IBM Magstar MP Tape Drive Model C02 3570-C11 |X| IBM Magstar MP Tape Drive Model C11 3570-C12 |X| IBM Magstar MP Tape Drive Model C12 3575-L06 |X| IBM Magstar MP Tape Library Dataserver Model L06 3575-L12 |X| IBM Magstar MP Tape Library Dataserver Model L12 3575-L18 |X| IBM Magstar MP Tape Library Dataserver Model L18 3575-L24 |X| IBM Magstar MP Tape Library Dataserver Model L24 3575-L32 |X| IBM Magstar MP Tape Library Dataserver Model L32 3580-H11 |X| Linear Tape Open (LTO) Bridge Box (HVD) 3580-H13 |X| LTO Ultrium Tape Drive 3580-H23 |X| IBM TotalStorage Ultrium 2 Tape Drive 3580-L11 |X| Linear Tape Open (LTO) Bridge Box (LVD) 3580-L13 |X| LTO Ultrium Tape Drive 3580-L23 |X| IBM TotalStorage Ultrium 2 Tape Drive 3581-H13 |X| LTO Ultrium Tape Autoloader 3581-H17 |X| Linear Tape Open (LTO) Autoloader (HVD) 3581-L13 |X| LTO Ultrium Tape Autoloader 3581-L17 |X| Linear Tape Open (LTO) Autoloader (LVD) 3581-H23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader 3581-L23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader 3583-L18 |X| Linear Tape Open (LTO) Tape Library - Scalable 3583-L36 |X| Linear Tape Open (LTO) Tape Library - Scalable 3583-L72 |X| Linear Tape Open (LTO) Tape Library - Scalable 3584-D22 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model D22 Expansion Frame 3584-D32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Base Frame 3584-D42 |X| IBM UltraScalable Tape Library Model D42 3584-D52 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model D52 Expansion Frame 3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1 3584-L22 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model L22 Base Frame 3584-L32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Expansion | | Frame 3584-L52 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model L52 Base Frame 3590-B11 |X| IBM Magstar Tape Subsystem Model B11 3590-B1A |X| IBM Magstar Tape Subsystem Model B1A 3590-C12 |X| IBM Magstar Silo Compatible Frame Model C1A 3590-E11 |X| Magstar Tape Subsystem 3590-E1A |X| Magstar Tape Subsystem 3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11 3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A 7205-311 |X| IBM 35 GB External Digital Linear Tape Drive Model 311 7205-440 |X| IBM 7205 Model 440 40 GB External Digital Linear Tape | | Drive 7206-005 |X| IBM External 4MM Tape Drive Model 005 7206-110 |X| IBM 12GB External 4MM DDS-3 Tape Drive Model 110 7206-220 |X| IBM 20GB External 4MM DDS-4 Tape Drive Model 220 7206-VX2 |X| IBM 7206-VX2 External Tape Drive 7207-011 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive Model | | 011 7207-012 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive Model | | 012 7207-122 |X| IBM 4GB External SLR5 QIC Tape Drive Model 122 7207-315 |X| IBM RS/6000 13GB 1/4-inch Tape Drive Model 315 7208-011 |X| IBM External 8MM Tape Drive Model 011 7208-341 |X| IBM 20GB External 8MM Tape Drive Model 341 7208-345 |X| IBM 7208 Model 345 60GB External 8MM Tape Drive 7331-205 |X| IBM 8MM Tape Library Model 205 7331-305 |X| IBM 8MM Tape Library Model 305 7332-005 |X| IBM 4MM DDS-2 Tape Autoloader Model 005 7332-110 |X| IBM 4MM DDS-3 Tape Cartridge Autoloader Model 110 7332-220 |X| IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220 7334-410 |X| IBM 7334 Model 410 8MM Tape Library (MAM2 4x30) 7336-205 |X| IBM 4MM Tape Library Model 205 7337-305 |X| IBM Digital Linear Tape Library Model 305 7337-306 |X| IBM Digital Linear Tape Library Model 306 7337-360 |X| IBM 7337 Digital Linear Tape Library Model 360 | | ---------+-+--------EXPANSION CABINETS--------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2032-C36 |X| McDATA Model 0C3 FC-512 Cabinet for McDATA Directors and | | Fabric Switch 2042-C40 |X| Inrange 40U Cabinet 2109-C36 |X| IBM TotalStorage San Cabinet C36 7012-G02 |X| Expansion Cabinet 7014-S00 |X| 1.6 Meter System Rack - 32U 7014-T00 |X| 1.8 Meter System Rack - 36U 7014-T42 |X| 2.0 Meter System Rack - 42U 7015-R00 |X| 1.6 Meter System Rack - 32U 7040-61D |X| I/O Drawer 7040-W42 |X| System Rack

The following feature availability matrix for MT 7039:
|6| A = AVAILABLE S = SUPPORTED |5| N = NOT SUPPORTED, MUST BE REMOVED |1| FEAT/PN | | DESCRIPTION --------|-|----------------------------------------- 0986 |A| CCS Customer Service Specify (US) 1820 |A| PCI-X Dual-port 4x IB HCA 1835 |A| 3 meter 4x IB Cable 1836 |A| 8 meter 4x IB Cable 2456 |A| LC-SC 50 Micron Fiber Converter Cable 2459 |A| LC-SC 62.5 Micron Fiber Converter Cable 2737 |S| Keyboard/Mouse Attachment Card - PCI 2848 |S| POWER GXT135P Graphics Accelerator 2849 |A| POWER GXT135P Graphics Accelerator with Digital Support 2861 |A| ARTIC960Hx 4-Port EIA-232 Cable 2863 |A| ARTIC960Hx 4-Port X.21 Cable 2864 |A| ARTIC960Hx 4-Port V.35 (DTE) Cable 2946 |S| Turboways 622 Mbps PCI MMF ATM Adapter 2947 |A| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter 3146 |A| RIO-2 (Remote I/O-2) Cable, 1.2M 3157 |S| 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3158 |S| 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3159 |S| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3161 |A| Switch Cable, 1.2 meter Copper 3164 |A| Remote I/O Cable, 1.0M 3165 |A| Remote I/O Cable, 3.0M 3166 |A| Switch Cable, 3 meter Copper 3167 |A| Switch Cable, 10 meter Copper 3168 |A| RIO-2 (Remote I/O-2) Cable, 2.5M 3273 |N| 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3274 |A| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3275 |A| 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3277 |A| 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly 3278 |A| 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly 3279 |S| 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly 3578 |A| 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly 3627 |S| IBM P76/P77 Color Monitor, Business Black, Captured Cable 3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable 3637 |A| IBM T541H/L150p 15" TFT Color Monitors, Business Black, | | Captured Cable 3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable 3639 |S| IBM ThinkVision L170p Flat Panel Monitor 3640 |A| IBM ThinkVision L171p Flat Panel Monitor 3642 |A| ThinkVision L191p Flat Panel Monitor 3800 |A| Power Cable Group, Left, Drawer Position #4609 3801 |A| Power Cable Group, Left, Drawer Position #4605 3802 |A| Power Cable Group, Left, Drawer Position #4601 3803 |A| Power Cable Group, Left, Drawer Position #4619 3804 |A| Power Cable Group, Left, Drawer Position #4623 3805 |A| Power Cable Group, Left, Drawer Position #4627 3806 |A| Power Cable Group, Left, Drawer Position #4631 3807 |A| Power Cable Group, Left, Drawer Position #4613 3810 |A| Power Cable Group, Right, Drawer Position #4609 3811 |A| Power Cable Group, Right, Drawer Position #4605 3812 |A| Power Cable Group, Right, Drawer Position #4601 3813 |A| Power Cable Group, Right, Drawer Position #4619 3814 |A| Power Cable Group, Right, Drawer Position #4623 3815 |A| Power Cable Group, Right, Drawer Position #4627 3816 |A| Power Cable Group, Right, Drawer Position #4631 3817 |A| Power Cable Group, Right, Drawer Position #4613 4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15 | | pin D-shell) 4256 |A| Extender Cable - USB Keyboards, 2M 4456 |A| 4GB Memory Card 4457 |A| 8GB Memory Card 4458 |A| 16 GB Memory Card 4599 |A| PCI Blind Swap Cassette Kit, Single Wide Adapters, Universal 4601 |A| Drawer Placement Indicator, 1U Position, Primary Rack 4605 |A| Drawer Placement Indicator, 5U Position, Primary Rack 4609 |A| Drawer Placement Indicator, 9U Position, Primary Rack 4613 |A| Drawer Placement Indicator, 13U Position, Primary Rack 4619 |A| Drawer Placement Indicator, 19U Position, Primary Rack 4623 |A| Drawer Placement Indicator, 23U Position, Primary Rack 4627 |A| Drawer Placement Indicator, 27U Position, Primary Rack 4631 |A| Drawer Placement Indicator, 31U Position, Primary Rack 4651 |A| Rack Indicator, Rack #1 4652 |A| Rack Indicator, Rack #2 4653 |A| Rack Indicator, Rack #3 4654 |A| Rack Indicator, Rack #4 4655 |A| Rack Indicator, Rack #5 4656 |A| Rack Indicator, Rack #6 4657 |A| Rack Indicator, Rack #7 4658 |A| Rack Indicator, Rack #8 4659 |A| Rack Indicator, Rack #9 4660 |A| Rack Indicator, Rack #10 4661 |A| Rack Indicator, Rack #11 4662 |A| Rack Indicator, Rack #12 4663 |A| Rack Indicator, Rack #13 4664 |A| Rack Indicator, Rack #14 4665 |A| Rack Indicator, Rack #15 4666 |A| Rack Indicator, Rack #16 4953 |S| IBM 64bit/66MHz PCI ATM 155 UTP Adapter 4957 |S| IBM 64bit/66MHz PCI ATM 155 MMF Adapter 4959 |S| IBM Token-Ring PCI Adapter 4960 |A| IBM e-business Cryptographic Accelerator 4961 |S| IBM Universal 4-Port 10/100 Ethernet Adapter 4962 |S| 10/100 Mbps Ethernet PCI Adapter II 4963 |N| PCI Cryptographic Coprocessor (FIPS-4) 4964 |A| PCI Cryptographic Coprocessor 5005 |A| Software Preinstall 5511 |S| 8-Way 1.1GHz POWER4 Processor, 128MB L3 Cache and System | | Planar 5513 |S| 4-Way 1.3GHz POWER4 Processor, 128MB L3 Cache and System | | Planar 5515 |S| 8-Way 1.5GHz POWER4+ Processor, 128MB L3 Cache and System | | Planar 5518 |S| 4-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System | | Planar 5519 |S| 8-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System | | Planar 5700 |A| IBM Gigabit Ethernet-SX PCI-X Adapter 5701 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter 5706 |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter 5707 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter 5710 |S| PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter 5711 |A| PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter 5716 |A| 2 Gigabit Fibre Channel PCI-X Adapter 5718 |A| 10 Gigabit Ethernet-SR PCI-X Adapter 5719 |A| IBM 10 Gigabit Ethernet-LR PCI-X Adapter 5723 |A| 2 Port Asynchronous EIA-232 PCI Adapter 6199 |S| DC Power Converter Assembly, CEC 6203 |S| PCI Dual Channel Ultra3 SCSI Adapter 6204 |S| PCI Universal Differential Ultra SCSI Adapter 6228 |S| 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus 6230 |S| Advanced SerialRAID Plus Adapter 6231 |S| 128 MByte DRAM Option Card 6235 |S| 32 MByte Fast-Write Cache Option Card 6236 |A| DC Power Converter Assembly, CEC 6239 |S| 2 Gigabit Fibre Channel PCI-X Adapter 6420 |A| 2 Link Switch Network Interface (p655) 6430 |S| Service Support Processor 6437 |S| Dual SNI Link to Single SNI Link Converter 6569 |S| ULTRA320 SCSI Backplane, two position 6591 |A| Dual CEC side by side Mounting Enclosure 8120 |A| Attachment Cable, Hardware Management Console to Host, | | 6-Meter 8121 |A| Attachment Cable, Hardware Management Console to Host, | | 15-Meter 8398 |S| SP Switch2 PCI-X Attachment Adapter 8800 |A| Quiet Touch Keyboard - USB, Business Black, US English, #103P 8801 |A| Quiet Touch Keyboard - USB, Business Black, French, #189 8802 |A| Quiet Touch Keyboard - USB, Business Black, Italian, #142 8803 |A| Quiet Touch Keyboard - USB, Business Black, German/Austrian, | | #129 8804 |A| Quiet Touch Keyboard - USB, Business Black, UK English, #166 8805 |A| Quiet Touch Keyboard - USB, Business Black, Spanish, #172 8806 |A| Quiet Touch Keyboard - USB, Business Black, Japanese, #194 8829 |A| Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171 8835 |A| Quiet Touch Keyboard - USB, Business Black, French Canadian, | | #445 8838 |A| Quiet Touch Keyboard - USB, Business Black, Russian, #443 8840 |A| Quiet Touch Keyboard - USB, Business Black, US English | | (EMEA), #103P 8841 |A| Mouse - Business Black with Keyboard Attachment Cable 9004 |A| Southern Hemisphere Designator for Monitors 9300 |A| Language Group Specify - US English 9703 |A| Language Group Specify - French 9704 |A| Language Group Specify - German 9705 |A| Language Group Specify - Polish 9707 |A| Language Group Specify - Portuguese 9708 |A| Language Group Specify - Spanish 9711 |A| Language Group Specify - Italian 9712 |A| Language Group Specify - Canadian French 9714 |A| Language Group Specify - Japanese 9715 |A| Language Group Specify - Traditional Chinese (Taiwan) 9716 |A| Language Group Specify - Korean 9718 |A| Language Group Specify - Turkish 9719 |A| Language Group Specify - Hungarian 9720 |A| Language Group Specify - Slovakian 9721 |A| Language Group Specify - Russian 9722 |A| Language Group Specify - Simplified Chinese (PRC) 9724 |A| Language Group Specify - Czech 9800 |A| Power Cord Specify - United States/Canada 9802 |A| Power Cord Specify - Brazil (125V, 15A) 9820 |A| Power Cord Specify - Belgium, Finland, France (250V, 16A) 9821 |A| Power Cord Specify - Denmark (250V, 10A) 9825 |A| Power Cord Specify - United Kingdom (250V, 13A) 9827 |A| Power Cord Specify - Israel (250V, 6-16A) 9828 |A| Power Cord Specify - Switzerland (250V, 10A) 9829 |A| Power Cord Specify - South Africa/Pakistan (250V, 16A) 9830 |A| Power Cord Specify - Italy/Chile (250V, 10A and 16A) 9831 |A| Power Cord Specify - Australia/New Zealand/Argentina (250V, | | 10A) 9833 |A| Power Cord Specify - Thailand (250V, 15A) 9834 |A| Power Cord Specify - Uruguay (250V, 10A)

Model Conversions

None.
Back to top

Technical Description

TOC Link Physical Specifications Operating Environment Limitations
Hardware Requirements Software Requirements

Central Electronics Complex -- (7039-651)
The pSeries 655 provides outstanding 64-bit compute performance for the UNIX environment. It features SOI (silicon on insulator) copper chip technology, mainframe inspired logical partitioning (LPAR) and self- managing capabilities. Its features include:

Excellent performance in 4-, or 8-way servers utilizing a single multi-chip module (MCM) containing four or eight POWER4+ or POWER4 processors. Each MCM also contains 5.6 MB of L2 cache shared across the processors.
High-performance ECC L3 cache of 128 MB per processor MCM.
Excellent reliability, availability, and serviceability (RAS) features providing:

Dynamic Processor Deallocation
Error checking and correcting (ECC) system memory and cache
I/O link failure recovery
PCI-X/PCI cards that can be hot-swapped
Hot-plug disk
Environmental sensing
Redundant power and cooling
Service processor for integrated system monitoring
Concurrent diagnostics
Dynamic LPAR

Logical partitioning (LPAR) of the system hardware into four partitions, switched or non-switched. Each logical partition operates under the control of it's own copy of the operating system. PCI-X/PCI cards may be assigned to an LPAR on a slot by slot basis if required. The integrated ethernet ports can be individually assigned to an LPAR. Internal disk can be assigned to only one LPAR. To achieve the minimum resources per LPAR, additional I/O expansion for disk is required. Information on resources required to enable LPAR can be found in the publication IBM Hardware Management Console for pSeries Installation and Operations Guide, SA38-0590. Four dynamic LPARs are supported with AIX 5L v5.2. Two static LPARs are supported with AIX 5L v5.1.
There are no feature upgrade paths between processor speeds or memory card sizes. Selection of the appropriate CEC processor features, and memory cards based upon future growth requirements within the 7039-651 is important. For system expansion, additional 7039-651 CEC's and 7040-61D I/O drawers are ordered.

The 7040-W42 rack configuration can scale from an single 7039-651 1.3 GHz 4-way up to a maximum of sixteen 7039-651 1.5 GHz 8-way (128-way processors) within the rack. Up to 32 7039-651's are supported in the clustered server environment.
Memory can be expanded up to 32 GB.
Internal I/O system scalability and expandability that supports the 7040-61D I/O drawer to provide:

Industry-standard PCI subsystem supporting 32-bit and 64-bit adapters
20 blind swap PCI slots per drawer
16 hot-plug capable Ultra3 SCSI bays per drawer
PCI-X with RIO-2 connectivity, on PCI-X based planars available on the POWER4+ versions of the p655. Additional SP Switch2 connectivity with the SP Switch2 PCI-X Attachment Adapter (#8389) in the I/O Drawer.

The 7039-651 can operate as a stand-alone server as well as in a cluster environment.
The 7039-651 is supported on the SP Switch2 fabric in both single plane and two plane environments. The SP Switch2 PCI-X Attachment Adapter (#8398) is utilized in the 7030-651 CEC to support the SMP in a single plane application, the SMP in the two plane application, and the two LPAR in the single plane application. The 7039-651 in LPAR mode can also have one LPAR on the SP Switch2 fabric, and one LPAR not on the SP Switch2 fabric. (#8389) is utilized in the I/O drawer to support two plane applications of two switched LPARs.
The SP Switch2 PCI Attachment Adapter (#8397) and the IBM RS/6000 SP System Attachment Adapter (#8396) are not supported in the I/O drawer 7040-61D when attached to the 7039-651 CEC.
A redundant system power which provides a modular design that allows adding power regulators as required based on the system configuration.
Industry recognized AIX 5L operating system license is included with each system.
Open industry standards, such as Open Firmware based on IEEE P1275 standard.

I/O Drawer -- (7040-61D)
The 7040-61D I/O drawer provides PCI adapter slots and internal disk capabilities for use with pSeries servers such as the pSeries 655 and the p690/p670. The Model 61D is a 4U drawer which mounts in the 24-inch 7040-61R System Rack and connects to the system Central Electronics Complex via remote I/O cables.
Each Model 61D I/O drawer provides twenty blind swap PCI slots and sixteen hot-swap disk bays. The Model 61D utilizes redundant power converters and power cabling to help ensure high reliability and availability. It utilizes 350 V bulk power supplied from the 7040-W42 system rack.
System Rack -- (7040-W42)
The 7040-W42 System Rack provides space for mounting system drawer components for pSeries servers such as the pSeries 655 Central Electronics Complex (7039-651) and the 7040-61D I/O drawers. The Model W42 is a 24-inch rack which provides 42U of rack space.
The 7040-W42 incorporates a 350 V DC bulk power subsystem to provide power for the components within the rack. The bulk power subsystem incorporates redundant bulk power assemblies mounted in the front and rear sections of the top 8U of the rack.
Number of 7039-651 servers 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ------------------------------------------------------------- Number of 0 2 2 2 4 4 6 6 6 6(1)6 6(2)6 6 6 6 6 7040- 61D 1 2 2 2 4 4 6 6 6 6 6 6 6 6 6 plus 7045- 2 2 4 4 6 6 6 6(1)6 6(2)6 6 SW4 3 4 6 6 6 6(1)6 6 6 4 6 6 6 6 6 5 6 6(1) Number of 7045-SW4 Number of BPRs 1 through 6 2 7 thourgh 11 4 12 4 13 through 16 6

Note: (1) Configurations above this limit require the (#8686 or #8687) - Line Cord with 100A plug, (#8677) - Line Cord with no plug, or (#8680) - Line Cord with 30A plug to maintain the redundant input power source/line cord condition. Customers have the option of continuing with the 60 Amp plug line cords, running in non-redundant mode for input power source/line cords. Customers also have the option of ordering any line cord at any time, regardless of configuration size. Two line cords are required per 7040-W42 rack, and these line cords must be identical features.
Note: (2) Configuration above this limit requires the (#6267) - Power Distribution Jumper Assembly, High Current. Rack configurations with this feature run in non-redundant mode for input power source/line cords.

Two Power Controller features (#6187) are required for all pSeries 655 systems, one per bulk power assembly. Each Power Controller provides power connections to support the systems four cooling fans. It also provides three additional connectors which can be utilized to attach DC power converters contained in the CEC and each I/O drawer. Ten additional connector locations are provided by the Power Distribution Assembly (#6188). Two Power Distribution Assemblies (one per Bulk Power Assembly) may be added as required to provide more connections for large system configurations.
Optional Integrated Battery Backup is available, if desired. The primary and secondary battery backup features (#6200 and #6201) interface with the power controllers of the front and rear bulk power assemblies. The battery backup features protect against power line disturbances and provide sufficient power to allow an orderly system shutdown in the event that the power sources fail. The battery backup features require up to 6U of rack space and are always installed at the 13U location of the primary 7040-W42 rack.
p655 CECs and I/O drawers occupy specific locations in the 7040-W42 rack. Drawer placement is specified by the mounting location features ordered on the CEC or I/O drawer. The first p655 CEC is in Drawer #1. Additional drawers can have 7039-651 CECs, 7040-61D I/O, or IBF features of the 7040-W42 rack.

Drawer #1 - Placement indicator #4609 - 9U position of 7040-W42 rack
Drawer #2 - Placement indicator #4605 - 5U position of 7040-W42 rack
Drawer #3 - Placement indicator #4601 - 1U position of 7040-W42 rack
Drawer #4 - Placement indicator #4619 - 19U position of 7040-W42 rack
Drawer #5 - Placement indicator #4623 - 23U position of 7040-W42 rack
Drawer #6 - Placement indicator #4627 - 27U position of 7040-W42 rack
Drawer #7 - Placement indicator #4631 - 31U position of 7040-W42 rack
Drawer #8 - Placement indicator #4613 - 13U position of 7040-W42 rack

Placement indicator #4613 - 13U position of 7040-W42 rack if Integrated Battery Backup feature (#6200) is not installed.

The position of the p655 CEC within the node enclosure is identified by the Power Cable Group (#38xx) for left side or right side of the enclosure.

Reliability -- Fault Avoidance
Major effort has been spent on the development of the p655 system to analyze single points-of-failure within the CEC (comprised of the processors, memory, and the I/O interface) and to either eliminate them or to provide hardening capabilities to significantly reduce the probability of failure. The best way to harden a system is to prevent error from occurring. Components within the CEC were selected to provide server levels of reliability. These components undergo the highest level of reliability testing within IBM. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems again go through a thorough testing process to ensure highest product quality level.
Extensive error detecting and checking circuitry is included to help ensure that infrequent component failures are recognized and corrected automatically, and properly reported for isolation and repair. This helps preserve the integrity of data stored and transported in the system. To support a diagnostic technique called run time first failure data capture, errors detected by the CEC error checking circuitry are captured automatically and analyzed by the service processor at the time of error. The system is designed to identify and log the appropriate replacement part or parts without the need to reproduce the error condition. The purpose of this function is to significantly reduce the repeat failure and repair scenarios associated with error recreate strategies by providing the correct isolation at the time of the failure. Reduced outages and quicker repair time can result in higher system reliability and better overall availability.
Hardware and software failures are recorded in the AIX log facility and analyzed by error log analysis (ELA) routines to provide warning to the system administrator on the causes of system problems. On p655 systems, all service action requests are forwarded from the operating system are partitions to a Service Focal Point (SFP) application running on the Hardware Management Console (HMC). The service focal point application analyzes the potentially duplicate reported failures from the various logical partitions, attempts to determine the root cause of the fault, and upon identifying the cause, initiates call-home requests to IBM support utilizing the HMC modem and the Service Agent application program. This enables IBM service representatives to have available needed replacement hardware components when a service call is placed, thus minimizing system repair time.
Availability -- Backup and Replication
Power and Cooling Subsystem
The pSeries 655 is designed to provide full fault tolerance with redundancy and concurrent repair for power and cooling at the CEC rack level for configurations of up to ten 7039-651 CECs and two 7040-61D I/O. Above the configuration of ten 7039-651 CECs and two 7040-61D I/O, N+1 redundancy and deferred maintenance is provided for the bulk power regulators.
The p655 also features redundant Internal Battery Features (IBF) to hold the system up during brown-out conditions. For full power loss protection, the p655 supports optional uninterruptible power supply (UPS) systems in addition to, or in place of, the IBF features.
In the I/O drawers, N+1 power and cooling is provided with the capability for concurrent repair of the power components and deferred repair of the cooling units.
Constant power monitoring hardware assists in detection of early loss of source power, and is designed to notify the operating system to effect an orderly shutdown. This same power monitoring hardware can detect the loss of redundant bulk power supplies, regulators, fans, and blowers and report them to the operating system for entry in the system error log and for maintenance notification.
CEC Subsystem
RAS features such as ECC on the L1 data cache and L2 data and directory caches can provide dynamic detection and correction of hard or soft array cell failures. Dynamic de-allocation functions include:

L3 cache line detect and L2 cache de-allocation
Individual L3 cache memory bypass
Mainstore memory card de-allocation
L2 cache and CPU de-allocation
Redundant bit steering in L1 and L2 caches and L2 and L3 directory arrays

Building on the robust features of the processor complex, the p655 system has enhanced error detection and prevention capabilities. These processor RAS features are called Dynamic Processor De-allocation and Persistent Processor De-allocation. Predictive failure analysis is performed on recoverable processor errors during run time. If a processor exceeds a threshold of recoverable errors such as on L2 cache accesses, the system is designed to log the event marked and deconfigure the processor from the system while the operating system continues to run. This feature allows the processor to be repaired on a deferred basis while helping prevent an unscheduled system outage.
Persistent Processor De-allocation is designed to ensure that on subsequent reboots, the processor remains out of the system configuration until replaced. The standard memory card has single-error correct and double-error detect ECC circuitry to correct single-bit memory failures. The double-bit detection helps maintain data integrity by detecting and reporting multiple errors beyond what the ECC circuitry can correct. The memory chips are organized such that the failure of any specific memory module should only affect a single bit within an ECC word (bit scattering), thus allowing for error correction and continued operation in the presence of a complete chip failure (Chipkill recovery).
This memory card also utilizes memory scrubbing and thresholding to determine when spare memory modules within each bank of memory should be used to replace ones that have exceeded their threshold value (dynamic bit steering). Memory scrubbing is the process of reading the contents of memory during idle time and checking and correcting any single-bit errors that have accumulated. These single-bit failures could be either solid (technology failures) or soft failures (intermittent errors caused by noise or other cosmic effects). If an error is detected, the system is designed to correct it by passing the data through the ECC logic that corrects the fault and then writing the corrected contents back to its memory address location.
In order to prevent an uncorrectable memory error from causing a system outage, the service processor is designed to initiate a deferred maintenance request on memory cards that have used their spare bits and are experiencing additional correctable errors (memory predictive failure analysis).
DASD predictive failure analysis is designed to detect an imminent disk failure and report the findings through the AIX log. Then the disk can be replaced either immediately or scheduled at a later time, depending on the configuration of the DASD subsystem. With the hot-plug disk design, normal operation can continue in the presence of a failed disk and a concurrent repair can be performed while the application continues uninterrupted.
Availability - UE Error Handling
Rare events in the processor, cache, and memory subsystems sometimes cause errors that exceed the error correction capability, and become Uncorrectable Errors (UEs). In other systems, these result in immediate checkstop with the offending component fully identified by the run-time diagnostics. The p655 system is designed not to cause a checkstop of the system. Instead, the corrupted data is specially marked until used by a processor, at which time a new synchronous machine check interrupt allows AIX to localize the effect to a single LPAR or a software process. This provides the capability of localizing a global system resource to affecting only the partition utilizing the resource instead of checkstopping all system partitions. The affected partition can then be rebooted with significantly reduced boot time as compared to a full system reboot.
I/O Subsystem
The interface from the processor to the I/O is through the Remote I/O (RIO) link. This link uses a loop interconnect technology to provide redundant paths to I/O drawers. There is a maximum of 1 I/O drawer on each loop path per CEC. RIO availability features include CRC checking on the RIO bus with packet retry on bus timeouts. In addition, if a RIO link fails, the hardware is designed to automatically initiate a RIO bus reassignment to route the data through the alternate path to its intended destination.
Availability - PCI BUS Error Recovery
In the p655 system, the PCI-X slots in the CEC and the PCI slots in the I/O expansion drawer have specialized hardware and system firmware to support PCI Bus Parity Error Recovery. The specialized hardware function is designed to interact with the software device driver to help prevent PCI slot bus errors from causing a system machine check interrupt and subsequent reboot. Instead, errors are reported locally to the specific device driver controlling activity to the PCI device. Special firmware commands allow the device driver to reset the slot and retry the command, and perform other recovery operations without affecting the total system operation.
The purpose of this design point is also to provide better fault isolation for PCI adapters because each PCI adapter is in essence on its own PCI bus. If it has an interface error, it only affects this single adapter instead of all other adapters residing on the common PCI bus. Thus repair time is significantly reduced because isolation is to the specific adapter and PCI hot plug allows concurrent repair of that card without affecting other adapters.
The pSeries 655 uses AIX online (concurrent) diagnostics with error log analysis and service aids, which can allow administrators or IBM service representatives to diagnose potential system malfunction without interrupting end-user operation.
Auto-restart options, when enabled, are designed to reboot the system automatically following:

Unrecoverable software error
Software hang
Hardware failure
Environmentally-induced (ac power) failure

These standard, high-availability features, coupled with the optional High Availability Cluster Multi-Processing (HACMP) program, are designed to provide unmatched availability among UNIX systems.
Serviceability -- Correcting Faults
The pSeries 655 product is designed to be installed and maintained by a trained service representative.
Much of the repair of the p655 system can be done in either a concurrent repair or a deferred repair scenario. Areas of the system that support the concurrent repair scenario are PCI-X/PCI adapters, the power subsystem on the I/O drawers as well as the integrated disk units. Deferred repair scenarios are supported for the I/O drawer cooling units, Remote I/O (RIO) connections, power connections, and predictive failure analyzed portions of the CEC including the processors and memory subsystems when components have been varied off either dynamically or at boot time.
Microcode Discovery Service
Microcode Discovery Service is a new service that allows you to determine if your pSeries 655 is at the latest microcode level. Using a secure Internet connection and a Web browser, Microcode Discovery Service can capture the machine data and generate a real-time comparison report showing subsystems that may need to be updated.
To accomplish this, you must install the new service tool onto your system. This tool, Inventory Scout, will run as a daemon on the server. The tool will create a file containing the current level of all microcode (adapters, devices, system, and support processor) levels in the system. This file will be used to compare the system level codes against the latest available levels on the IBM Web site. You will then receive a report notifying you of any new updates available along with a link from which the microcode can be downloaded.
This service will allow you to maintain the pSeries 655 microcode at the latest levels to obtain peak performance. This service will be available to customers through the Worldwide Support Centers.

Service Focal Point
To accommodate error reporting, analysis, and repair in the LPAR environment, a new application was developed to run on the HMC. This application is called the Service Focal Point (SFP) and leverages the design capabilities of the HMC to provide equivalent virtual function to the current capabilities presented by physical op panels, service processor TTY menu interfaces, and system firmware interfaces as well as capability for configuring/reconfiguring building block hardware into partitions. The SFP is a system infrastructure that manages serviceable event information for the system building blocks. It consists of resource managers that monitor and record information about different objects in the system. It filters and correlates events from the resource managers and initiates calls home when appropriate. It also provides a user interface that allows a user to view the events and perform problem determination. When a problem is corrected, the user can record actions that have been taken to resolve the hardware problem. These features of SFP support the overall problem management strategy in a complex system. The SFP application receives service action events from the Service Processor for critical system down situations, and from the Service Agent application programs running on the individual logical partitions for system recoverable or predictive events as well as operating system or device driver detected events.
Service Action Event Log
The SFP collects the serviceable events from different building blocks together in a Service Action Event (SAE) log. The log entries are generated by analysis routines that run on an error that has occurred in a building block. The resource manager for the building block forwards information about the event to the service focal point and the information is placed in the SAE log. The particular content of the error data depends upon the type of the error and on the system configuration itself.
The SAE log on the SFP also contains pointers to extended information that may have been recorded at the time of a serviceable event by the building block. Extended error collection includes not only the collection of first failure data capture, but also vital product data, partition information, operating system error logs, service processor error logs, and error register data.
When the SFP receives a new log entry, filtering is performed to determine if this was a unique event. The filtering is done because sometimes an event notification can come from more than one resource manager for the same event or a resource manager may forward a notification for an event that previously occurred but has not been corrected yet.
Service Agent Component
When a SAE is logged in the SFP, the system needs to communicate the failure back to IBM. During this call-home function, particular error data and system configuration information needs to be sent to IBM to drive the service delivery infrastructure. The SFP utilizes the Service Agent focal point application residing on the HMC along with the HMC modem to initiate the call home and transfer the pertinent error information to IBM Service. When a call home is required, Service Agent manages the connection to IBM that is used to open a problem record. The problem record is used by the service delivery team to determine whether or not to dispatch a customer engineer (CE) with the appropriate service parts to the system to perform a repair.
When service personnel perform a repair on the system, the SFP is used to identify the source of the problem and record information relating to the repair. When the repair has been completed, the service representative can update the SAE log with FRU replacement information and any comments. The information stored by the SFP represents the system's service history and can be used to ensure proper maintenance over the life of the system.
Guiding Light Maintenance
To assist the service representative in locating the correct system unit and drawer that contain the fault requiring repair, the SFP can enable the capability to flash LEDs on the respective system unit and drawer that contain the fault.

Service Support
Hardware service requests go to IBM's remote support center for initial problem diagnosis. This approach gives you direct access to skilled specialists. These specialists can either solve the problem over the phone or help get it resolved as quickly as possible. They are backed up by a highly-trained product engineering team to assist in problem identification and resolution.
Physical Specifications

pSeries 655 (7039-651)(single rack):

Width:

78.5 cm (30.9 in)(with acoustic doors)
78.5 cm (30.9 in)(with slim-line doors)

Depth:

179.9 cm (70.8 in)(with acoustic doors)
144.3 cm (56.8 in)(with slim-line doors)

Height:

202.5 cm (79.7 in)(with acoustic doors)
202.5 cm (79.7 in) (with slim-line doors)

Weight:

1,652 kgs (3,635 lb maximum)(with acoustic doors)
1,642 kgs (3,613 lb maximum) (with slim-line doors)

Operating Environment

Temperature: 10 to 32 degrees C (50 to 90 degrees F)
Relative humidity: 8% to 80%
Maximum wet bulb: 23 degrees C (73 degrees F)
Sound power single p655 CEC:

6.7 bels (B) (operating/idling with acoustic covers)
7.4 bels (B) (operating/idling with slim-line covers)

Sound pressure single p655 CEC:

50 dBA (operating/idling with acoustic covers
57 dBA (operating/idling with slim-line covers)

Attention
Your server installation may be subject to government regulations (such as those prescribed by OSHA or European Community Directives) that cover noise-level exposure in the workplace. The IBM eServer pSeries 655 is available with an optional acoustical door feature that can reduce the likelihood of exceeding noise-level exposure limits. The actual sound- pressure levels in your installation will depend on a variety of factors, including the number of servers in the installation, the size, materials, and configuration of the room where the server(s) is(are) installed, the noise levels from other equipment, the room ambient temperature, and employees' location in relation to the equipment. It is recommended that a qualified person, such as an industrial hygienist, be consulted to determine whether the sound-pressure levels to which employees may be exposed exceed regulatory limits.
(Additional detailed acoustic information is available in the publication Site and Hardware Planning Information.)

Maximum altitude: (10,000 ft)
Power requirements:

Operating voltage @ 50/60 Hz: (3-phase):

200 to 240 V ac
380 to 415 V ac
480 V ac

Electrical output: 31,818 watts (maximum, non-redundant line cords).
Power source loading: 32.1 kVA (maximum non-redundant line cord configuration).
Thermal output: 30,012 joules/sec (102,000 Btu/hr) (maximum configuration, non-redundant line cords)

EMC Conformance Classification
This equipment is subject to FCC rules and it shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.

U.S.: FCC CFR47 Part 15 Class A
Europe: CISPR 22 Class A; "CE" Mark of Conformity
Japan: VCCI-1
Korea: Korean Requirement Class A

Homologation: Telecom Environmental Testing (Safety and EMC)
Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude.
This IBM pSeries model and applicable features meet the environmental testing requirements of the country TELECOM and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom Regulatory authority.
Product Safety/Country Testing/Certification

U.S.: UL
Canada: CNL (CSA or cUL)
Germany/Europe: CB Report/Certificate, EU DoC (CE Mark, IEC 60950, EN 60950)

General Requirements
The pSeries 655 is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).
Limitations

pSeries 655 Central Electronics Complex (CEC) (7039-651)

The pSeries 655 CEC (7039-651) is a 4U tall, 24-inch half drawer, rack-mounted device. It houses the system processors, memory, system support processor, I/O drawer connection capability, and associated components. The first CEC is installed with the bottom of the drawer at placement indicator (#4609), the 9U position of the 7040-W42 rack. The 7039-651 requires the (#6591) Dual CEC side-by-side Mounting Enclosure, ordered on the CECs positioned in the left side of the rack.
The p655 is powered by a single multi-chip processor module. The Multi-Chip Module (MCM) contains either four or eight processors. The p655 is available in the following configurations:

4-way 1.3 GHz, POWER4, high-memory-bandwidth processors (4 processors per MCM)
8-way 1.1 GHz, dual processor POWER4 processors (8 processors per MCM)
4-way 1.7 GHz, POWER4+, high-memory-bandwidth processors (4 processors per MCM)
8-way 1.5 GHz, dual processor POWER4+ processors (8 processors per MCM)

Each processor contains 32 KB of data cache and 64 KB of instruction cache.
Each processor MCM contains 5.6 MB of Level 2 cache shared between the processors. This provides 1.44 MB of L2 cache per processor for four processor MCMs and 0.72 MB of L2 cache per processor for eight processor MCMs.
Each installed processor MCM is supported with 128 MB of Level 3 cache. This provides 32 MB of L3 cache per processor for four processor MCMs and 16 MB of L3 cache per processor for eight processor MCMs. The L3 cache operates at 400 MHz for 1.1 GHz processors and 433 MHz for 1.3 GHz processors.
Note: pSeries 655 systems configured with 4-way, HPC option processor MCMs (#5513 or #5518) may be especially attractive to customers in the high-performance computing environment.
The 7039-651 can operate as a stand-alone server or in a cluster environment. When operating as a stand-alone server, for AIX installation, a NIM server is required.
The 7039-651 is supported on the SP Switch2 fabric in both single plane and two plane environments. The SP Switch2 PCI-X Attachment Adapter (#8398) is utilized in the 7039-651 CEC to support the SMP in a single plane application, the SMP in the two plane application, and the two LPAR in the single plane application. The 7039-651 in LPAR mode can also have one LPAR on the SP Switch2 fabric, and one LPAR not on the SP Switch2 fabric. (#8389) is utilized in the I/O drawer to support two plane applications of two switched LPARs.
The SP Switch2 PCI Attachment Adapter (#8397) and the IBM RS/6000 SP System Attachment Adapter (#8396) are not supported in the I/O drawer 7040-61D when attached to the 7039-651 CEC.
The p655 utilizes redundant power within the rack power distribution. For configurations below ten 7039-651 CECs and two 7040-61D I/O drawers, the 7040-W42 rack implements redundant bulk power assemblies, bulk power regulators, power controllers, power distribution assemblies, associated power input, and power distribution cabling.
For configurations above ten 7039-651 CECs and two 7040-61D I/O drawers, high-current applications are addressed by the Power Distribution Jumper Assembly. The 7040-W42 rack's bulk power assemblies are tied together, maintaining N+1 capability at the bulk power regulators.
Power for the p655 CEC is supplied from a dc power converter in the 7039-651. The bulk power is converted to the power levels required for the CEC within the dc power converter. Power input is supplied by the redundant power cable groups, based upon position within the rack.
Monitoring and control of the 7039-651 is provided by a Hardware Management Console (7315-C01, 7315-C02, or existing HMC on a p690/p670), and for PSSP clusters, a Control Workstation.
U.S. English (#8800 and #8840) USB keyboards can be ordered with the 7040-61D I/O drawer for use with native-attached displays on the pSeries 655.
Various native language groups are supported by AIX on pSeries 655. Keyboard function with the following languages has been verified. USB keyboards for these languages can be obtained anywhere IBM products are sold, such as at the IBM Web site. For more information on where to buy these IBM products, contact your local IBM sales representative.

U.K. English, #166, Black USB Keyboard
French, #189, Black USB Keyboard
German/Austrian, #129, Black USB Keyboard
Italian, #142, Black USB Keyboard
Japanese, #194, Black USB Keyboard
Russian, #443, Black USB Keyboard
Spanish, #172, Black USB Keyboard
LA Spanish, #171, Black USB Keyboard
Chinese / U.S., #467, Black USB Keyboard

P655 (POWER4+) Memory

The pSeries 655 (with POWER4+ MCM's) has four memory slots.
Minimum 7039-651 memory is 4 GB. Maximum memory is 64 GB.
The default memory configuration is two 8 GB memory cards for a total of 16 GB
Memory is available in 4 GB (#4456) 8 GB (#4457) and 16 GB (#4458) sizes.
Supported memory plug rules/configurations:

Total memory Slot 1 Slot 2 Slot 3 Slot 4 ------------ ------ ------ ------ ------ 4 GB 4 GB - - - 8 GB 4 GB - 4 GB - 16 GB 4 GB 4 GB 4 GB 4 GB 16 GB 8 GB - 8 GB - 32 GB(1) 8 GB 8 GB 8 GB 8 GB 32 GB 16 GB - 16 GB - 64 GB(1) 16 GB 16 GB 16 GB 16 GB

Note: (1) Quantity of four 8 GB cards or four 16 GB cards are supported on #5515 or #5518 with a co-requisite of DCA #6236. These memory configurations are supported on #5519 which requires DCA #6236.
p655 (POWER4) Memory

The pSeries 655 (with POWER4 MCM's) has four memory slots.
Minimum 7039-651 memory is 4 GB. Maximum memory is 32 GB.
Memory is available in 4 GB (#4456) and 8 GB (#4457) sizes.
Supported memory plug rules/configurations:

Total memory Slot 1 Slot 2 Slot 3 Slot 4 ------------ ------ ------ ------ ------ 4 GB 4 GB - - - 8 GB 4 GB - 4 GB - 16 GB 4 GB 4 GB 4 GB 4 GB 16 GB 8 GB - 8 GB - 32 GB 8 GB 8 GB 8 GB 8 GB

Memory placement and balancing across processors is desirable for certain workloads. This is especially important in the technical computing environment where maximum memory bandwidth is desired. Unbalanced configurations will function properly, but may not provide optimum performance for the planned applications.

16 GB Memory Card Delivery

16 GB memory cards will be delivered on an extended lead time basis. p655 orders with this memory feature (#4458) may experience delays of up to 60 days.

Logical Partitioning (LPAR)

The pSeries 655 can be divided into four logical partitions (nonswitched, or switched). System resources can be dedicated to each LPAR.
LPAR allocation, monitoring, and control is provided by the HMC.
Each LPAR functions under its own instance of the operating system.
A minimum of 4 GB of system memory is recommended per LPAR.
I/O adapters in PCI slots may be allocated to an LPAR on an individual slot basis.
Integrated Ultra3 SCSI controllers may be individually allocated to an LPAR.

IBM Hardware Management Console for pSeries

The IBM HMC (7315-C01/C02/CR2/C03) provides a set of functions necessary to manage the pSeries 655 and LPAR configurations. These functions include:

Create and store LPAR profiles, which define the processor, memory, and I/O resources allocated to an individual partition
One HMC can control up to 16 p655 servers and a max of 32 LPARs. Information regarding HMC control of clustered servers can be found in the "Scaling Statement" section of the Family 9078+01 IBM eServer Cluster 1600, 9078-160 sales manual.
If redundant HMC function is desired, the p655 can be attached to two separate hardware management consoles.
Starting, stopping, and resetting a system partition
Boot a partition or system by selecting a profile
Display system and partition status
Displaying the contents of a virtual operator panel for each partition or controlled system

The HMC also provides a service focal point for the systems it controls. It is connected to the service processor of the system via a dedicated serial link. The HMC provides tools for problem determination and service support, such as call-home and error log notification through an analog phone line.
The HMC is a dedicated function device. It is utilized only for the control and service functions of the pSeries servers it serves. It is not available for use as a general purpose computing resource.
Each HMC must be configured with a graphics display and a keyboard. A mouse is included with each HMC and is not required to be ordered separately.
An Ethernet connection between the HMC and each active partition on the pSeries server is recommended. This connection provides:

Additional systems management such as WebSM management of AIX in the individual partitions
Collection and passing of hardware service events to the HMC for automatic notification of error conditions to IBM
Total system inventory collection

Various native language keyboards are available for the hardware system console. However, the HMC displays menus and control information in English regardless of the keyboard utilized.

System Control

Each p655 CEC must be connected to an HMC for system control, LPAR, and service functions. The HMC is capable of supporting multiple p655 and p690/p670 systems if desired.
The p655 CEC provides two special RS-232 async ports dedicated for HMC attachment. The connectors on these ports are differentiated from standard async ports by providing a 9-pin female connector versus the standard 9-pin male connector. The connection between the HMC and the p655 CEC is through cables available in 6-meter (#8120) and 15-meter (#8121) lengths.
The p655 rack (7040-W42) provides two special RS-422 async ports per base power controller, dedicated for HMC attachment. The connection between the HMC and the p655 rack is through cables available in 6-meter (#8122) and 15-meter (#8123) lengths. For specific details and considerations of connecting the RS-422 rack and the RS-232 CEC to the HMC, refer to the publications Web site and the Planning Information section of this letter.

I/O within the CEC

The pSeries 655 has three PCI-X slots.

I/O Drawers

The pSeries 655 utilizes the 7040-61D I/O drawer for directly attached PCI or PCI-X adapters and SCSI disk capabilities.
Each 7040-61D I/O drawer is divided into two separate halves. Each half contains 10 blind swap PCI or PCI-X slots and two Ultra3 SCSI 4-pack back planes for a total of 20 PCI or PCI-X slots and 16 hot-swap disk bays per drawer.
One single-wide PCI blind swap cassette (equivalent to those in feature #4599) is provided in each PCI slot of the 7040-61D. Cassettes not containing a PCI adapter will be shipped with a dummy card installed to ensure proper environmental characteristics for the drawer. If additional single-wide blind swap cassettes are needed, feature number 4599 should be ordered.
All ten PCI or PCI-X slots on each I/O drawer planar are capable of supporting either 64-bit or 32-bit PCI or PCI-X adapters. Each #6563 planer provides seven 3.3V, 66 MHz, 64-bit PCI slots and three 5V, 32 MHz, 64-bit PCI slots. Each #6571 planar provides ten PCI-X slots capable of supporting 3.3V signaling PCI or PCI-X adapters operating at speeds up to 133MHz.
While it is not optimized, #6563 PCI and #6571 PCI-X planars may reside in the same 61D I/O drawer.
Each I/O drawer planar incorporates two integrated Ultra3 SCSI adapters for direct attachment of the two 4-pack hot swap backplanes in that half of the drawer. These adapters do not support external SCSI device attachments.
Each half of the 7040-61D I/O drawer is powered separately.

I/O Drawer Attachment

7040-61D I/O drawers are always connected to the p655 CEC via RIO (Remote I/O) or RIO-2 loops. 61D connections are always made in loops to help protect against a single point-of-failure resulting from an open, missing, or disconnected cable. p655 systems with non-looped configurations could experience degraded performance and serviceability.
RIO loop connections operate at 500MHz. RIO loops connect to the 7039-651 CEC via RIO ports within the features #5511, #5513, #5515, #5518 or #5519.
RIO-2 loop connections operate at 1GHz. RIO-2 loops connect to the 7039-651 CEC via RIO-2 ports within the features #5515, #5518 and #5519.
7040-61D I/O drawers may be connected to the 7039-651 CEC in either single loop or dual loop mode. Dual loop mode is recommended whenever possible as it provides the maximum bandwidth between the I/O drawer and the CEC.
Single loop mode connects an entire I/O drawer to the CEC via one RIO or RIO-2 loop (2 ports). The two I/O planars in the I/O drawer are connected together via a short RIO or RIO-2 cable. Single loop connection requires one loop (2 ports) per I/O drawer.
Single loop mode connection is required for I/O drawers containing two #6563 PCI Planars attached to a single model 651 CEC.
Single loop mode is allowed for I/O drawers containing two #6571 PCI-X planars. However dual loop mode is recommended for this configuration.
Dual loop mode connects each I/O planar in the drawer to a separate CEC. Each I/O planar is connected to the CEC via separate RIO-2 loops.
Dual loop mode is required for I/O drawers containing one #6563 PCI I/O planar and one #6571 PCI-X I/O planar.
Dual loop mode is recommended for all I/O drawers containing two #6571 I/O planars.
PCI I/O planars (#6563) provide a RIO type cable connector for system attachment. When connecting a PCI I/O planar to a model 651 CEC, 1 meter RIO to RIO-2 cables (#3164) or 3 meter RIO to RIO-2 cables (#3165) are used. Single loop connection of two #6563 planars within an I/O drawer utilizees a 0.5M RIO cable (#3145) between the planars to complete the I/O loop.
PCI-X I/O planars (#6571) must be attached to the 7039-651 CEC via RIO-2 connections. RIO-2 connections for CECs to I/O drawers residing in adjacent drawers in the 7040-W42 system rack are made via 1.2 meter RIO-2 cables (#3146). Non-adjacent CEC to I/O drawers connect via 2.5 meter RIO-2 cables (#3168). Single loop connection of two #6571 planars within an I/O drawer utilize a 1.2 meter RIO-2 cable (#3146) between the planars to complete the I/O loop

Disks and Boot Devices

Minimum of two internal SCSI hard disks are required per p655 server. It is recommended that these disks be utilized as mirrored boot devices. This configuration provides service personnel the maximum amount of diagnostic information if the system encounters errors in the boot sequence.
Disk sizes offered are 18.2 GB (#3157), 36.4 GB (#3158), 73.4 GB (#3159), and 146.8 GB (#3275).
Boot support is also available from local SCSI, SSA, and Fibre Channel adapters, or from network via ENET or token-ring adapters.
The p655 incorporates an Early Power Off Warning (EPOW) capability that assists in performing an orderly system shutdown in the event of a sudden power loss. IBM recommends use of the integrated battery backup features or an uninterruptible power system (UPS) to help ensure against loss of data due to power failures.
Hot-swap disk capability in the p655 CEC is enabled by downloading the microcode - PCI-X Dual Channel Ultra320 SCSI Adapter bus, Version 0018
Ultra320 function support is limited to the p655 with feature numbers #5515, #5518, or #5519.

Rack and Power

The 7040-W42 rack is a 24-inch rack with an integrated power subsystem to support the pSeries 655 system. It provides 42U of rack space.
The 7040-W42 rack is utilized in multirack clusters. Rack indicators (such as #4651) identify the racks within the cluster and specify the desired rack in which to place various rack-mounted components.
The 7040-W42 rack must have door assemblies installed. The following door assemblies are available:

A sculptured black front door with copper accent (#6076) is available for the Model W42 rack, used with the slim-line rear door (#6078). Use this combination where system footprint is the primary consideration.
A sculpted black front acoustic door (#6119) is available for the Model W42 rack, used with the acoustic rear door (#6079). Use this combination when you want a quieter environment.

If additional external communication and storage devices are required, 7014-T00 or T42 racks should be ordered (no limit on quantity).
The height of the 7040-W42 rack (42U) may require special handling when shipping by air or when moving under a low doorway.
The weight of the 7040-W42 rack (42U) may require special handling during movement to the customer installation.
The 7040-W42 rack incorporates two bulk power assemblies (#8690). These provide 350 V dc power for devices located in the W42 rack. The bulk power assemblies are mounted in front and rear positions and occupy the top 8U of the rack. To provide optimum system availability, they should be powered from separate power sources via separate line cords.
Bulk power regulators (#6186) interface to the bulk power assemblies to ensure proper power is supplied to the systems components. The number of bulk power regulators required is configuration dependent based on the number of CECs and I/O drawers installed. The following table provides the number of bulk power regulators required for each combination of CECs and I/O drawers.

Number of 7039-651 servers 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ------------------------------------------------------------- Number of 0 2 2 2 4 4 6 6 6 6(1)6 6(2)6 6 6 6 6 7040- 61D 1 2 2 2 4 4 6 6 6 6 6 6 6 6 6 plus 7045- 2 2 4 4 6 6 6 6(1)6 6(2)6 6 SW4 3 4 6 6 6 6(1)6 6 6 4 6 6 6 6 6 5 6 6(1) Number of 7045-SW4 Number of BPRs 1 through 6 2 7 thourgh 11 4 12 4 13 through 16 6

Note: (1) Configurations above this limit require the (#8686 or #8687) - Line Cord with 100A plug, (#8677) - Line Cord with no plug, or (#8680) - Line Cord with 30A plug to maintain the N+1 input power source/line cord condition. Customers have the option of continuing with the 60 Amp plug line cords, running in N mode for input power source/line cords. Customers also have the option of ordering any line cord at any time, regardless of configuration size. Two line cords are required per 7040-W42 rack, and these line cords must be identical features.
Note: (2) Configuration above this limit requires the (#6267) - Power Distribution Jumper Assembly, High Current. Rack configurations with this feature run in N mode for input power source/line cords.

Two Power Controller features (#6187) are required for all pSeries 655 systems, one per bulk power assembly. Each Power Controller provides power connections to support the systems four cooling fans. Three additional connectors can be utilized to attach dc power converters contained in the CEC and each I/O drawer. Ten additional connector locations are provided by the Power Distribution Assembly (#6188). Two Power Distribution Assemblies (one per Bulk Power Assembly) may be added as required to provide more connections for system configurations greater than or equal to four rack drawers.
The Power Distribution Jumper Assembly, High Current (#6267) does not have redundant power input at the line cords. Power input is shared between the two line cords when the #6267 is installed.
Optional Integrated Battery Backup is available, if desired. The primary and secondary battery backup features (#6200 and #6201) interface with the power controllers of the front and rear bulk power assemblies. The battery backup features protect against power line disturbances and provide sufficient power to allow an orderly system shutdown if power sources fail. The battery backup features require up to 6U of rack space and are always installed at the 13U location of the primary 7040-W42 rack.
p655 CECs and I/O drawers occupy specific locations in the 7040-W42 rack. Drawer placement is specified by the mounting location features ordered on the CEC or I/O drawer. The first p655 CEC is in Drawer #1. Additional drawers can have 7039-651 CECs, 7040-61D I/O, or IBF features of the 7040-W42 rack.

Drawer #1 - Placement indicator #4609 - 9U position of 7040-W42 rack
Drawer #2 - Placement indicator #4605 - 5U position of 7040-W42 rack
Drawer #3 - Placement indicator #4601 - 1U position of 7040-W42 rack
Drawer #4 - Placement indicator #4619 - 19U position of 7040-W42 rack
Drawer #5-Placement indicator #4623 - 23U position of 7040-W42 rack
Drawer #6 - Placement indicator #4627 - 27U position of 7040-W42 rack
Drawer #7 - Placement indicator #4631 - 31U position of 7040-W42 rack
Drawer #8 - Placement indicator #4613 - 13U position of 7040-W42 rack

Placement indicator #4613 - 13U position of 7040-W42 rack if Integrated Battery Backup feature (#6200) is not installed.

The position of the p655 CEC within the node enclosure is identified by the Power Cable Group (#38xx) for left side or right side of the enclosure.

The e-config user has control of the functional associations between p655 CECs and 61D I/O drawers. The configurator and manufacturing procedures handle the physical placement of power modules, integrated battery features, drawers, and their power connections to comply with the technical attributes, RAS capabilities, and limitations of the W42 rack.
e-config assigns rack position features during system validation. If a 7040-W42 rack is ordered, it will be assigned to the p655 CEC assigned rack position indicator feature 4609. Stand-alone p655 components can be ordered without a W42 rack. Rack position features will not be validated by e-config on stand-alone p655 orders that do not include a W42 rack or during e-config MES sessions.
Rules for Racking p655 Components
CECs will be placed first at the left rack location (as viewed from the front), then the right rack location at the same EIA position. Both EIA positions will be filled before a new CEC EIA position can be filled.
At validation:

Place 7039-651 then 7040-61D when p655 has single loop RIO connection to 2x #6563 planars.
Place 7039-651 then 7040-61D when p655 has single loop RIO-2 connection to 2x #6571 planars.
Place 7039-651 connected to left side of 7040-61D, then place 7039-651 connected to right side of 7040-61D, then place 7040-61D when p655s have dual loop RIO connection to 2x #6563 planars.
Place 7039-651 connected to left side of 7040-61D, then place 7039-651 connected to right side of 7040-61D, then place 7040-61D when p655s have dual loop RIO, RIO-2 connection to mixed planar drawer.
Place 7039-651 connected to left side of 7040-61D, then place 7039-651 connected to right side of 7040-61D, then place 7040-61D when p655s have dual loop RIO-2 connection to 2x #6571 planars.
Place 7039-651 then 7040-61D when p655 has RIO connection to 2x #6563 planar drawer with no connection to right side of 7040-61D.
Place 7039-651 then 7040-61D when p655 has RIO connection to mixed planar drawer with no connection to right side of 7040-61D.
Place 7039-651 then 7040-61D when p655 has RIO-2 connection to 2x #6571 planar drawer with no connection to right side of 7040-61D.
Place 7039-651 then 7040-61D when p655 has RIO-2 connection to mixed planar drawer with no connection to left side of 7040-61D.
Place 7039-651 not connected to any 7040-61D drawer

Note: 1 When ordered, the IBFs have a fixed positions in Rack EIA 13, second IBF in EIA 15, and third IBF in EIA 17.
Note: 2 When required, RIO or RIO-2 cables must be ordered on the 7040-61D for system connection validation and correct placement of the p655 components. RIO or RIO-2 cables ordered on the 7039-651 (CEC) will be ignored during e-config validation.
Note: 3 Only 1 non-system-connected 7040-61D planar (right side from the front) will be allowed per Multisystem order (per CFR). A non-system- connected 7040-61D will be identified as a 7040-61D without #3145, and only 2 RIO or 2 RIO-2 cables.
Multiple Rack Configurations
econfig is providing the capability to configure a p655 solution that requires multiple W42 racks. The user will have the ability to define the contents of each rack and assign a unique RACK ID# to each rack and also have every CEC and I/O associated with the specific rack carry the same RACK ID #.
Rack indicator features FC 4651 through FC 4666 represent Rack #'s 1 through 16 respectively.
Racking, placement and feature assignments remain the same as if a single rack is being configured. No rack to rack connections are supported. (In other words all 7040-61D's must be in the same physical rack as its associated CEC 7039-651.)
Only a quantity of 1 rack ID of each type can be configured per econfig session. Otherwise the user must configure each p655 rack solution independently in a separate configurator session.
Hardware Requirements

pSeries 655 -- Minimum System Configuration
The minimum configuration for an IBM eServer pSeries 655 includes the following items:

One - 7039-651 Central Electronics Complex (4U rack space required, half drawer)

One - (#5513) - 4-Way 1.3 GHz POWER4 Processor, 128 MB L3 Cache and System Planar
One - (#6430) - Service Support Processor
One - (#6199) - DC Power Converter Assembly, CEC
One - (#6569) - ULTRA320 SCSI Backplane, two position
Two - (#3157) - 18.2 GB 10,000 rpm Ultra3 SCSI Disk Drive Assembly
One - (#4609) - Drawer Placement Indicator, 9U Position, Primary Rack
One - (#3800) - Power Cable Group, Left, Drawer Position #4609
One - (#6591) - Dual CEC side-by-side Mounting Enclosure
One - Language Specify (#9xxx)

One - 7040-W42 System Rack (24-inch rack with 42U available space)

One - (#6076) - Front Door, Black with Copper Accent, Primary Rack
One - (#6078) - Rear Door, Slim Line, Primary Rack
Two - (#6186) - Bulk Power Regulator
Two - (#6187) - Power Controller
One - (#8690) - Bulk Power Assembly, Redundant
One - (#0211) - Rack Content Specify: 7039/651 - 4U, Half Drawer
Two - (#8678) - Line Cord, 60A/240 V ac, 6-AWG, 14 feet, IEC309 Plug
One - Language Specify (#9xxx)

Software Requirements

AIX 5L for POWER V5.1 with the 5100-03 Recommended Maintenance package (APAR IY32749) or later.
p655 systems running PSSP require PSSP V3.4 with APAR IY34495 or PSSP V3.5 with APAR IY34496.

Back to top

Publications

The following publications are shipped with the pSeries 655. Additional copies are available. To order, contact your IBM representative.
Title Order Number -------------------------------- ------------ pSeries 655 Installation Guide SA38-0616 System Unit Safety Information SA23-2652 PCI Adapter Placement Reference SA38-0538

Back to top

Features -- Specify/Special/Exchange

TOC Link No Charge Specify Codes Special Feature Codes -- Chargeable Feature Exchanges

No Charge Specify Codes

LANGUAGES

(#9300) - Language Group Specify - US English
(#9703) - Language Group Specify - French
(#9704) - Language Group Specify - German
(#9705) - Language Group Specify - Polish
(#9707) - Language Group Specify - Portuguese
(#9708) - Language Group Specify - Spanish
(#9711) - Language Group Specify - Italian
(#9712) - Language Group Specify - Canadian French
(#9714) - Language Group Specify - Japanese
(#9715) - Language Group Specify - Traditional Chinese (Taiwan)
(#9716) - Language Group Specify - Korean
(#9718) - Language Group Specify - Turkish
(#9719) - Language Group Specify - Hungarian
(#9720) - Language Group Specify - Slovakian
(#9721) - Language Group Specify - Russian
(#9722) - Language Group Specify - Simplified Chinese (PRC)
(#9724) - Language Group Specify - Czech

LINECORDS

(#9800) - Power Cord Specify - United States/Canada
(#9802) - Power Cord Specify - Brazil (125V, 15A)
(#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A)
(#9821) - Power Cord Specify - Denmark (250V, 10A)
(#9825) - Power Cord Specify - United Kingdom (250V, 13A)
(#9827) - Power Cord Specify - Israel (250V, 6-16A)
(#9828) - Power Cord Specify - Switzerland (250V, 10A)
(#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
(#9830) - Power Cord Specify - Italy/Chile (250V, 10A and 16A)
(#9831) - Power Cord Specify - Australia/New Zealand/Argentina (250V, 10A)
(#9833) - Power Cord Specify - Thailand (250V, 15A)
(#9834) - Power Cord Specify - Uruguay (250V, 10A)

MISCELLANEOUS

(#5005) - Software Preinstall
(#0986) - CCS Customer Service Specify (US)

SPECIFY CODES

(#9004) - Southern Hemisphere Designator for Monitors
(#4601) - Drawer Placement Indicator, 1U Position, Primary Rack
(#4605) - Drawer Placement Indicator, 5U Position, Primary Rack
(#4609) - Drawer Placement Indicator, 9U Position, Primary Rack
(#4613) - Drawer Placement Indicator, 13U Position, Primary Rack
(#4619) - Drawer Placement Indicator, 19U Position, Primary Rack
(#4623) - Drawer Placement Indicator, 23U Position, Primary Rack
(#4627) - Drawer Placement Indicator, 27U Position, Primary Rack
(#4631) - Drawer Placement Indicator, 31U Position, Primary Rack
(#4651) - Rack Indicator, Rack #1
(#4652) - Rack Indicator, Rack #2
(#4653) - Rack Indicator, Rack #3
(#4654) - Rack Indicator, Rack #4
(#4655) - Rack Indicator, Rack #5
(#4656) - Rack Indicator, Rack #6
(#4657) - Rack Indicator, Rack #7
(#4658) - Rack Indicator, Rack #8
(#4659) - Rack Indicator, Rack #9
(#4660) - Rack Indicator, Rack #10
(#4661) - Rack Indicator, Rack #11
(#4662) - Rack Indicator, Rack #12
(#4663) - Rack Indicator, Rack #13
(#4664) - Rack Indicator, Rack #14
(#4665) - Rack Indicator, Rack #15
(#4666) - Rack Indicator, Rack #16

Special Feature Codes -- Chargeable

Special Features - Initial Orders

ADAPTERS

(#6430) - Service Support Processor

CABLES

(#3800) - Power Cable Group, Left, Drawer Position #4609

POWER

(#6199) - DC Power Converter Assembly, CEC

MISCELLANEOUS

(#6569) - ULTRA320 SCSI Backplane, two position

PROCESSORS

(#5511) - 8-Way 1.1GHz POWER4 Processor, 128MB L3 Cache and System Planar
(#5513) - 4-Way 1.3GHz POWER4 Processor, 128MB L3 Cache and System Planar
(#5519) - 8-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar

Special Features - Plant and/or Field Installable

ADAPTERS

(#1820) - PCI-X Dual-port 4x IB HCA
(#2737) - Keyboard/Mouse Attachment Card - PCI
(#2848) - POWER GXT135P Graphics Accelerator
(#2849) - POWER GXT135P Graphics Accelerator with Digital Support
(#2946) - Turboways 622 Mbps PCI MMF ATM Adapter
(#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
(#4599) - PCI Blind Swap Cassette Kit, Single Wide Adapters, Universal
(#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
(#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
(#4959) - IBM Token-Ring PCI Adapter
(#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
(#4962) - 10/100 Mbps Ethernet PCI Adapter II
(#4960) - IBM e-business Cryptographic Accelerator
(#4963) - PCI Cryptographic Coprocessor (FIPS-4)
(#4964) - PCI Cryptographic Coprocessor
(#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
(#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
(#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
(#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
(#5710) - PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter
(#5711) - PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter
(#5716) - 2 Gigabit Fibre Channel PCI-X Adapter
(#5718) - 10 Gigabit Ethernet-SR PCI-X Adapter
(#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
(#5723) - 2 Port Asynchronous EIA-232 PCI Adapter
(#6203) - PCI Dual Channel Ultra3 SCSI Adapter
(#6204) - PCI Universal Differential Ultra SCSI Adapter
(#6228) - 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
(#6230) - Advanced SerialRAID Plus Adapter
(#6231) - 128 MByte DRAM Option Card
(#6235) - 32 MByte Fast-Write Cache Option Card
(#6239) - 2 Gigabit Fibre Channel PCI-X Adapter
(#6420) - 2 Link Switch Network Interface (p655)
(#8398) - SP Switch2 PCI-X Attachment Adapter

CABLES

(#1835) - 3 meter 4x IB Cable
(#1836) - 8 meter 4x IB Cable
(#8120) - Attachment Cable, Hardware Management Console to Host, 6-Meter
(#8121) - Attachment Cable, Hardware Management Console to Host, 15-Meter
(#2456) - LC-SC 50 Micron Fiber Converter Cable
(#2459) - LC-SC 62.5 Micron Fiber Converter Cable
(#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
(#4256) - Extender Cable - USB Keyboards, 2M
(#2861) - ARTIC960Hx 4-Port EIA-232 Cable
(#2863) - ARTIC960Hx 4-Port X.21 Cable
(#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
(#3146) - RIO-2 (Remote I/O-2) Cable, 1.2M
(#3161) - Switch Cable, 1.2 meter Copper
(#3164) - Remote I/O Cable, 1.0M
(#3165) - Remote I/O Cable, 3.0M
(#3166) - Switch Cable, 3 meter Copper
(#3167) - Switch Cable, 10 meter Copper
(#3168) - RIO-2 (Remote I/O-2) Cable, 2.5M
(#3801) - Power Cable Group, Left, Drawer Position #4605
(#3802) - Power Cable Group, Left, Drawer Position #4601
(#3803) - Power Cable Group, Left, Drawer Position #4619
(#3804) - Power Cable Group, Left, Drawer Position #4623
(#3805) - Power Cable Group, Left, Drawer Position #4627
(#3806) - Power Cable Group, Left, Drawer Position #4631
(#3807) - Power Cable Group, Left, Drawer Position #4613
(#3810) - Power Cable Group, Right, Drawer Position #4609
(#3811) - Power Cable Group, Right, Drawer Position #4605
(#3812) - Power Cable Group, Right, Drawer Position #4601
(#3813) - Power Cable Group, Right, Drawer Position #4619
(#3814) - Power Cable Group, Right, Drawer Position #4623
(#3815) - Power Cable Group, Right, Drawer Position #4627
(#3816) - Power Cable Group, Right, Drawer Position #4631
(#3817) - Power Cable Group, Right, Drawer Position #4613
(#6437) - Dual SNI Link to Single SNI Link Converter

DISKS

(#3157) - 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3158) - 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3159) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3273) - 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3274) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3275) - 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3277) - 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3278) - 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
(#3279) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

DISPLAYS

(#3627) - IBM P76/P77 Color Monitor, Business Black, Captured Cable
(#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
(#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable
(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
(#3639) - IBM ThinkVision L170p Flat Panel Monitor
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
(#3642) - ThinkVision L191p Flat Panel Monitor
(#5515) - 8-Way 1.5GHz POWER4+ Processor, 128MB L3 Cache and System Planar
(#5518) - 4-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar

KEYBOARDS

(#8800) - Quiet Touch Keyboard - USB, Business Black, US English, #103P
(#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189
(#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142
(#8803) - Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129
(#8804) - Quiet Touch Keyboard - USB, Business Black, UK English, #166
(#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172
(#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194
(#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
(#8835) - Quiet Touch Keyboard - USB, Business Black, French Canadian, #445
(#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443
(#8840) - Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P

MEMORY

(#4456) - 4GB Memory Card
(#4457) - 8GB Memory Card
(#4458) - 16 GB Memory Card

MISCELLANEOUS

(#8841) - Mouse - Business Black with Keyboard Attachment Cable

POWER

(#6236) - DC Power Converter Assembly, CEC

RACK RELATED

(#6591) - Dual CEC side by side Mounting Enclosure

Feature Descriptions

The following is a list of all feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features. The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities.
The order type defines if a feature is orderable only on initial orders, only on MES orders, on both initial and MES orders, or if a feature is supported on a model due to a model conversion. Supported features cannot be ordered on the converted model, only left on or removed from the converted model.
(#0986) CCS Customer Service Specify (US)

This feature code specifies that the system will receive special request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.

Attributes provided: None
Attributes required: None
For 7039-651: (#0986)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#1820) PCI-X Dual-port 4x IB HCA

The #1820, PCI-X Dual-port 4x InfiniBand Host Channel Adapter, provides attachment to the Topspin Server Switch models 120 and 270. Connection to the Topspin Server Switches are accomplished by using the 4x IB Cables.

Attributes provided: 2 ports of 4x IB to attach to the Topspin Server Switch models 120 and 270
Attributes required: Available PCI-X slot
For 7039-651: (#1820)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2 )
OS level required: AIX 5.3, or later.
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

Note: There is a system maximum of four within the CEC plus I/O drawers.

(#1835) 3 meter 4x IB Cable

This 3 meter 4x IB cable is utilized for InfiniBand applications.

Attributes provided: 3 meter 4x IB cable
Attributes required: 4x IB port
For 7039-651: (#1835)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max )
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#1836) 8 meter 4x IB Cable

This 8 meter 4x IB cable is utilized for InfiniBand applications.

Attributes provided: 8 meter 4x IB cable
Attributes required: 4x IB port
For 7039-651: (#1836)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max )
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#2456) LC-SC 50 Micron Fiber Converter Cable

50 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters.

Attributes provided: Attachment to external 50 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector.
Attributes required: None
For 7039-651: (#2456)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2459) LC-SC 62.5 Micron Fiber Converter Cable

62.5 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters.

Attributes provided: Attachment to external 62.5 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector.
Attributes required: None
For 7039-651: (#2459)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2737) Keyboard/Mouse Attachment Card - PCI

(No Longer Available as of December 30, 2005)
This PCI card provides for connection of one USB keyboard and mouse.

Attributes provided: USB Keyboard/Mouse Attachment
Attributes required: Empty PCI slot
For 7039-651: (#2737)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5.1 or later, AIX 5.2 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2848) POWER GXT135P Graphics Accelerator

(No Longer Available as of December 12, 2003)
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes.

Hardware Description

128-bit graphics processor
8-bit CLUT or 24-bit true color
16 MB SDRAM
32-bit PCI interface
Universal PCI (5.0v or 3.3v)
1 hardware color map

Features Supported

Up to approximately 16.7 million colors
Rectangular clipping
2 analog monitor outputs
Up to 1600 x 1200 resolution
60 to 85 Hz refresh rates (ISO 9241, Part 3)

APIs Supported

X-Windows and Motif
UMS 2.3.0 (no hardware scaling)

Software Requirements: AIX Versions 4.3.3 or 5.1
Attributes provided: 2D Graphics
Attributes required: 1 PCI slot
For 7039-651: (#2848)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2849) - POWER GXT135P Graphics Accelerator with Digital Support

The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors.

Hardware Description

128-bit graphics processor
8-bit CLUT or 24-bit true color
16 MB SDRAM
32-bit PCI interface
Universal PCI (5.0v or 3.3v)
1 hardware color map

Features Supported

Up to approximately 16.7 million colors
Rectangular clipping
2 analog monitor outputs at up to 1280 x 1024 resolution
1 analog monitor output at up to 2048 x 1536 resolution
1 digital monitor output at up to 1600 x 1200 resolution
60 to 85 Hz refresh rates (ISO 9241, Part 3)

APIs Supported

X-Windows and Motif
UMS 2.3.0 (no hardware scaling)

Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only)

Attributes provided: 2D Graphics
Attributes required: 1 PCI slot
For 7039-651: (#2849)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5.1 or AIX 5.2, or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2861) ARTIC960Hx 4-Port EIA-232 Cable

Attributes provided: 4-port EIA-232 cable for (#2947)
Attributes required: One #2947 adapter
For 7039-651: (#2861)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2863) ARTIC960Hx 4-Port X.21 Cable

Attributes provided: 4-port X.21 cable for (#2947)
Attributes required: One #2947 adapter
For 7039-651: (#2863)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable

Attributes provided: 4-port X.35 (DTE) cable for (#2947)
Attributes required: One #2947 adapter
For 7039-651: (#2864)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2946) Turboways 622 Mbps PCI MMF ATM Adapter

(No Longer Available as of December 17, 2004)
The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal PCI Adapter. This adapter provides direct access to the ATM network at a dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI MMF ATM Adapter is a short form-factor adapter that interfaces to the system via the PCI bus and connects to the 622 Mbps ATM network via dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for packet memory. This ATM adapter also provides a hardware assist for TCP checksum which can provide a performance improvement by minimizing the host CPU cycles.

Attributes provided: One full-duplex connection to 622 ATM network
Attributes required: One available PCI card slot
For 7039-651: (#2946)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter

The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one- slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of: EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of up 2.0M bps. Software support is provided by ARTIC960 Support for AIX, Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations. Go to to the following URL to view the latest AIX 5.1 support limitation statements.

http://www.ibm.com/servers/aix/os/adapters/51.html

Attributes provided: One to four WAN connections at up to 2.0Mbps
Attributes required: One full length 32-bit PCI slot, AIX Version 4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5, 4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
For 7039-651: (#2947)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3146) RIO-2 (Remote I/O-2) Cable, 1.2M

This 1.2-meter RIO-2 (Remote I/O-2) cable connects two RIO-2 based I/O planars within an I/O drawer.

Attributes provided: 1.2M RIO-2 Cable
Attributes required: I/O Drawer and two RIO-2 I/O planars
For 7039-651: (#3146)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3157) 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of August 8, 2003)
The 18.2GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 18.2GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 160 MBps.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI-3 fast 80
Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2.99 ms
Rotational Speed: 10,000 RPM
Maximum Data Transfer Rate: 44.3 MBps

Limitation: This disk drive requires attachment to a supported Ultra3 SCSI Adapter in an system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160MBps.

Attributes provided: 18.2GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3157)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3158) 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of August 8, 2003)
The 36.4GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 36.4GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 160 MBps.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI-3 fast 80
Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2.99 ms
Rotational Speed: 10,000 RPM
Maximum Data Transfer Rate: 44.3 MBps

Limitation: This disk drive requires attachment to a supported Ultra3 SCSI Adapter in an system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160MBps.

Attributes provided: 36.4GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3158)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3159) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

(No Longer Available as of August 8, 2003)
The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 160 MBps.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI-3 fast 80
Average Seek Time: 5.38 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 3.00 ms
Rotational Speed: 10,000 RPM
Maximum Data Transfer Rate: 83.88 MBps

Limitation: This disk drive requires attachment to a supported Ultra3 SCSI Adapter in an system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160MBps.

Attributes provided: 73.4 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3159)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3161) Switch Cable, 1.2 meter Copper

The Switch Cable, 1.2 meter Copper, is used within the pSeries High Performance Switch (HPS) network to enable copper connections between the switch network interface (SNI) features in the p655 to the switch port connection card within the HPS for p655 servers in EIA locations 5, 9 and 13. It is also used for NSB to ISB switch connections when the NSBs and ISBs are in the same multi-switch rack.

Attributes provided: Switch Cable, 1.2 meter Copper
Attributes required: None
For 7039-651: (#3161)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3164) Remote I/O Cable, 1.0M

This 1-meter Remote I/O cable is utilized to connect an I/O drawer to the system CEC. It should be used when the I/O drawer and the system CEC are in vertically adjacent drawers within the rack.

Attributes provided: 1M RIO Cable
Attributes required: I/O Drawer and CEC RIO ports
For 7039-651: (#3164)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3165) Remote I/O Cable, 3.0M

This 3-meter Remote I/O cable is utilized to connect an I/O drawer to the system CEC. It should be used when the I/O drawer and the system CEC are not in vertically adjacent drawers within the rack.

Attributes provided: 3M RIO Cable
Attributes required: I/O Drawer and CEC RIO ports
For 7039-651: (#3165)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3166) Switch Cable, 3 meter Copper

The Switch Cable, 3 meter Copper, is used within the pSeries High Performance Switch (HPS) network to enable copper connections between the switch network interface (SNI) features in the p690 or p655 to the switch port connection card within the HPS.

Attributes provided: Switch Cable, 3 meter Copper
Attributes required: None
For 7039-651: (#3166)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3167) Switch Cable, 10 meter Copper

The Switch Cable, 10 meter Copper, is used within the pSeries High Performance Switch (HPS) network to enable copper connections between the switch network interface (SNI) features in the p690 or p655 to the switch port connection card within the HPS. It is used when the switch is in a different rack than the p690 or p655. #3167 is also used for switch to switch connections between Node Switch Boards (NSB's) or between NSB's and Intermediate Switch Boards (ISB's).

Attributes provided: Switch Cable, 10 meter Copper
Attributes required: None
For 7039-651: (#3167)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3168) RIO-2 (Remote I/O-2) Cable, 2.5M

This 2.5 meter RIO-2 (Remote I/O-2) cable is utilized to connect RIO-2 based I/O planars and I/O drawers to the system CEC.

Attributes provided: 2.5M RIO-2 Cable
Attributes required: I/O Drawer and two RIO-2 connectors on the system CEC.
For 7039-651: (#3168)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3273) 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

(No Longer Available as of March 31, 2005)
The 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.
Note: Feature Code #5515 or #5518 is required in this system in order to run at Ultra320 speed'.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI U320
Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2.99 ms
Rotational Speed: 10,000 RPM
Maximum Data Transfer Rate: 67 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320MBps.

Attributes provided: 36.4 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3273)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3274) 73.4GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.
Note: Feature Code #5515 or #5518 is required in this system in order to run at Ultra320 speed'.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI U320
Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2.99 ms
Rotational Speed: 10,000 RPM
Maximum Data Transfer Rate: 67 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320MBps.

Attributes provided: 73.4 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3274)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3275) 146.8GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.
Note: Feature Code #5515 or #5518 is required in this system in order to run at Ultra320 speed'.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI U320
Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2.99 ms
Rotational Speed: 10,000 RPM
Maximum Data Transfer Rate: 67 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320MBps. Also, and and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320MBps.

Attributes provided: 146.8 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3275)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3277) 36.4GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.
Note: Feature Code #5515 or #5518 is required in this system in order to run at Ultra320 speed'.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI U320
Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2 ms
Rotational Speed: 15,000 RPM
Maximum Data Transfer Rate: 83 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320MBps.

Attributes provided: 36.4 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3277)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1, or later, AIX 5.2 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3278) 73.4GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.
Note: Feature Code #5515 or #5518 is required in this system in order to run at Ultra320 speed'.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI U320
Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2 ms
Rotational Speed: 15,000 RPM
Maximum Data Transfer Rate: 83 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320MBps.

Attributes provided: 73.4 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3278)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1, or later, AIX 5.2 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3279) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI U320
Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
Average Latency: 2 ms
Rotational Speed: 15,000 RPM
Maximum Data Transfer Rate: 107 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

Attributes provided: 146.8 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3279)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2 )
OS level required: AIX V4.3 or higher PSSP levels 3.1, 3.2 and higher Linux- Refer to the following Web Site for Linux information:
http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.
Characteristics:

Form Factor: 3.5-inch, 1-inch (25 mm) high
Cable included: No
External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
Attachment Industry Spec: SCSI U320
Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)
Average Latency: 2.99 ms
Rotational Speed: 10,000 RPM
Maximum Data Transfer Rate: 88 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

Attributes provided: 300 GB of disk storage mounted in a carrier.
Attributes required: One disk drive bay.
For 7039-651: (#3578)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2 )
OS level required: AIX V4.3 or higher PSSP levels 3.1, 3.2 and higher Linux- Refer to the following Web Site for Linux information:
http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable

(No Longer Available as of July 25, 2003)
The P76/P77 monitor has the following general characteristics:

Business Black color
17-inch Flat Trinitron** CRT with a viewable image size of 406 mm (16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
Designed to provide reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced, with a maximum addressability of 1600 x 1200 pels at 70 Hz.

Note: The P76 and P77 monitors are functionally equivalent.

Attributes provided: Color Monitor
Attributes required: Graphics Adapter
For 7039-651: (#3627)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable

(No Longer Available as of February 27, 2004)
The P260/P275 monitor has the following general characteristics:

Business Black color
21-inch Flat Trinitron** CRT with a viewable image size of 503 mm (19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
Designed to provide reduced flicker operation at an optimum addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.

Note: The P260 and P275 monitors are functionally equivalent.

Attributes provided: Color Monitor
Attributes required: Graphics Adapter
For 7039-651: (#3628)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable

The T541H and the L150p monitors have the following general characteristics:

Business Black color
15-inch TFT LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297 mm pixel pitch/type for bright, high-definition images.
Designed to provide flicker free operation at a maximum resolution of 1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in digital mode.
Tilt/swivel stand
Supports 2D Graphics Adapters only

Attributes provided: Color Flat-panel Monitor
Attributes required: 2D Graphics Adapter
For 7039-651: (#3637)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable

(No Longer Available as of June 24, 2005)
The IBM C220p monitor has the following general characteristics:

Business Black color
21.0-inch Flat Aperture Grille CRT with a viewable image size of 508 mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel pitch for bright, high-definition images.
Designed to provide reduced flicker operation at an optimum and maximum supported addressability of 1600 x 1200 pels at up to 85 Hz (Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
Tilt/swivel stand
Dual input allows attachment to two systems concurrently.
Depth: 483.6 mm (19.0 in.)
Height: 516.4 mm (20.3 in.)
Width: 512.8 mm (20.2 in.)
Weight: 30.5 kg (67.2 lbs.)

Attributes provided: Color Monitor
Attributes required: Graphics Adapter
For 7039-651: (#3638)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3639) IBM ThinkVision L170p Flat Panel Monitor

(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following general characteristics:

Business color
17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm pixel pitch/type for bright, high-definition images.
Maximum resolution of 1280 x 1024.
Tilt/swivel and height adjustable stand
Analog or digital connection
Dual input allows attachment to two systems concurrently.
Internal power
Depth: 237.0 mm (9.3 in.)
Height: 457.0 mm (18.0 in.)
Width: 400.0 mm (15.7 in.)
Weight: 5.7 kg (12.6 lbs.)
Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
Contrast ratio: 500:1 (typical)
Video inputs: 15-pin D / DVI-D
Two removable cables: one analog and one digital
Attributes provided: Color Flat-panel Monitor
Attributes required: Graphics Adapter
For 7039-651: (#3639)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1 )
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3640) - IBM ThinkVision L171p Flat Panel Monitor

The IBM ThinkVision L171p LCD flat-panel monitor has the following general characteristics:

Business black color
17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.280mm pixel pitch/type for bright, high-definition images.
Maximum resolution of 1280 x 1024.
Tilt/swivel and height adjustable stand
Analog or digital connection
Dual input allows attachment to two systems concurrently.
Internal power
Depth: 237.0 mm (9.3 in.)
Height: 457.0 mm (18.0 in.)
Width: 400.0 mm (15.7 in.)
Weight: 5.7 kg (12.6 lbs.)
Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
Contrast ratio: 500:1 (minimal) 700:1 (typical)
Video inputs: 15-pin D / DVI-D
Two removable cables: one analog and one digital
Attributes provided: Color Flat-panel Monitor
Attributes required: Graphics Adapter
For 7039-651: (#3640)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3642) - ThinkVision L191P Flat Panel Monitor

The ThinkVision L191p LCD flat-panel monitor has the following general characteristics:

Business black color
19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294mm pixel pitch/type for bright, high-definition images.
Maximum resolution of 1280 x 1024.
Tilt/swivel and height adjustable stand
Analog or digital connection
Dual input allows attachment to two systems concurrently.
Internal power
Depth: 237.0 mm (9.3 in.)
Height: 457.0 mm (18.0 in.)
Width: 408.0 mm (16.1 in.)
Weight: 7.1 kg (15.7 lbs.)
Contrast ratio: 1000:1 (typical)
Video inputs: 15-pin D / DVI-D
Two removable cables: one analog and one digital

Attributes provided: Color Flat-panel Monitor
Attributes required: Graphics Adapter
For 7039-651: (#3642)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3800) Power Cable Group, Left, Drawer Position #4609

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 9U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4609
For 7039-651: (#3800)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#3801) Power Cable Group, Left, Drawer Position #4605

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 5U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4605
For 7039-651: (#3801)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3802) Power Cable Group, Left, Drawer Position #4601

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 1U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4601
For 7039-651: (#3802)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3803) Power Cable Group, Left, Drawer Position #4619

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 19U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4619
For 7039-651: (#3803)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3804) Power Cable Group, Left, Drawer Position #4623

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 23U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4623
For 7039-651: (#3804)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3805) Power Cable Group, Left, Drawer Position #4627

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 27U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4627
For 7039-651: (#3805)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3806) Power Cable Group, Left, Drawer Position #4631

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 31U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4631
For 7039-651: (#3806)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3807) Power Cable Group, Left, Drawer Position #4613

This feature provides redundant power cabling for the left side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 13U location of the primary system rack.

Attributes provided: Redundant Left Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4613
For 7039-651: (#3807)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3810) Power Cable Group, Right, Drawer Position #4609

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 9U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4609
For 7039-651: (#3810)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3811) Power Cable Group, Right, Drawer Position #4605

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 5U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4605
For 7039-651: (#3811)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3812) Power Cable Group, Right, Drawer Position #4601

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 1U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4601
For 7039-651: (#3812)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3813) Power Cable Group, Right, Drawer Position #4619

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 19U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4619
For 7039-651: (#3813)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3814) Power Cable Group, Right, Drawer Position #4623

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 23U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4623
For 7039-651: (#3814)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3815) Power Cable Group, Right, Drawer Position #4627

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 27U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4627
For 7039-651: (#3815)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3816) Power Cable Group, Right, Drawer Position #4631

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 31U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4631
For 7039-651: (#3816)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#3817) Power Cable Group, Right, Drawer Position #4613

This feature provides redundant power cabling for the right side of a drawer (as viewed from the front of the rack) with the bottom of the drawer positioned at the 13U location of the primary system rack.

Attributes provided: Redundant Right Side Drawer Power Cables
Attributes required: Drawer with Placement Feature #4613
For 7039-651: (#3817)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)

This cable is required to connect displays with a 15-pin "D" shell connector to the appropriate accelerator connector when it is farther away than the attached monitor cable can reach. Rack mounted systems are likely candidates for this extender cable.

Attributes provided: 6-foot extension cable
Attributes required: Supported monitor and adapter with a 15-pin "D" shell connector.
For 7039-651: (#4242)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4256) Extender Cable - USB Keyboards, 2M

This feature provides a 2M extension cable for use with USB keyboards.

Attributes provided: 2M Extension Cable
Attributes required: USB Keyboard
For 7039-651: (#4256)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4456) 4GB Memory Card

This feature provides 4GB of system memory.

Attributes provided: 4GB of system memory
Attributes required: One memory slot
For 7039-651: (#4456)

Minimum required: 0
Maximum allowed: 4 (Initial order maximum: 4)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

Note: 4GB Memory cards are plugged in quantities of 1, 2 or 4 cards.

(#4457) 8GB Memory Card

This feature provides 8GB of system memory.

Attributes provided: 8GB of system memory
Attributes required: One memory slot
For 7039-651: (#4457)

Minimum required: 0
Maximum allowed: 4 (Initial order maximum: 4)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

Note: 8GB Memory cards are ordered in pairs, and plugged in 2 or 4 slots.

(#4458) - 16 GB Memory Card

This feature provides 16 GB of system memory.

Attributes provided: 16 GB of system memory
Attributes required: One memory slot
For 7039-651: (#4458)

Minimum required: 0
Maximum allowed: 4 (Initial order maximum: 4)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

Note: 16 GB Memory cards are ordered in pairs, and plugged in 2 or 4 slots.

(#4599) PCI Blind Swap Cassette Kit, Single Wide Adapters, Universal

This feature contains a blind swap cassette for single slot width PCI adapters. It also includes the necessary hardware to adapt the cassette to mount various sizes of PCI cards.

Attributes provided: Blind swap PCI cassette
Attributes required: PCI card and empty PCI adapter location
For 7039-651: (#4599)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: MES
CSU: No
Return parts MES: No

(#4601) Drawer Placement Indicator, 1U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 1U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4601)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4605) Drawer Placement Indicator, 5U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 5U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4605)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4609) Drawer Placement Indicator, 9U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 9U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4609)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4613) Drawer Placement Indicator, 13U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 13U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4613)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4619) Drawer Placement Indicator, 19U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 19U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4619)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4623) Drawer Placement Indicator, 23U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 23U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4623)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4627) Drawer Placement Indicator, 27U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 27U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4627)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4631) Drawer Placement Indicator, 31U Position, Primary Rack

This drawer placement indicator specifies that the bottom of a drawer should be positioned at the 31U position of the primary system rack.

Attributes provided: Drawer position indicator in rack
Attributes required: Available rack space for the drawer
For 7039-651: (#4631)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4651) Rack Indicator, Rack #1

This indicator is used to specify the first rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the first rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4651)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4652) Rack Indicator, Rack #2

This indicator is used to specify the second rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the second rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4652)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4653) Rack Indicator, Rack #3

This indicator is used to specify the third rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the third rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4653)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4654) Rack Indicator, Rack #4

This indicator is used to specify the fourth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the fourth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4654)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4655) Rack Indicator, Rack #5

This indicator is used to specify the fifth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the fifth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4655)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4656) Rack Indicator, Rack #6

This indicator is used to specify the sixth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the sixth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4656)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4657) Rack Indicator, Rack #7

This indicator is used to specify the seventh rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the seventh rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4657)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4658) Rack Indicator, Rack #8

This indicator is used to specify the eighth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the eighth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4658)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4659) Rack Indicator, Rack #9

This indicator is used to specify the ninth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the ninth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4659)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4660) Rack Indicator, Rack #10

This indicator is used to specify the tenth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the tenth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4660)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4661) Rack Indicator, Rack #11

This indicator is used to specify the eleventh rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the eleventh rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4661)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4662) Rack Indicator, Rack #12

This indicator is used to specify the twelfth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the twelfth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4662)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4663) Rack Indicator, Rack #13

This indicator is used to specify the thirteenth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the thirteenth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4663)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4664) Rack Indicator, Rack #14

This indicator is used to specify the fourteenth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the fourteenth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4664)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4665) Rack Indicator, Rack #15

This indicator is used to specify the fifteenth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the fifteenth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4665)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4666) Rack Indicator, Rack #16

This indicator is used to specify the sixteenth rack of a multi rack complex. It is also used to specify that a rack mounted device (such as an I/O drawer) is to be mounted in the sixteenth rack of a multi rack complex.

Attributes provided: Rack specify
Attributes required: Rack
For 7039-651: (#4666)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4953) IBM 64bit/66MHz PCI ATM 155 UTP Adapter

(No Longer Available as of December 17, 2004)
The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155 Mbps full-duplex connection to ATM networks over either permanent virtual circuits (PVC) or switched virtual circuits (SVC). This adapter enables TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair (UTP). It also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.

Attributes provided: One ATM 155 UTP connector
Attributes required: One PCI slot
For 7039-651: (#4953)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter

(No Longer Available as of March 31, 2006)
The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155 Mbps full-duplex connection using permanent virtual circuits (PVC) or switched virtual circuits (SVC) and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
This 155 Mbps PCI MMF ATM Adapter is compatible with:

IBM 8285 ATM Workgroup Switch
IBM 8260 ATM Subsystem
IBM 8282 ATM Concentrator
IBM 8281 ATM LAN Bridge
Attributes provided: One ATM 155Mbps MMF connection
Attributes required: One PCI slot
For 7039-651: (#4957)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4959) IBM Token-Ring PCI Adapter

(No Longer Available as of March 31, 2006)
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short, 32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half- duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into the ring, even when connected to speed-sensing hubs. This adapter will operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45 connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin D-shell connectors. The Token-Ring PCI Adapter will provide network boot capability.

Attributes provided:
Attributes required: A single empty 32-bit PCI adapter slot.
For 7039-651: (#4959)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4960) IBM e-business Cryptographic Accelerator

The IBM e-business Cryptographic Accelerator is a short form factor PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure Web transaction, SSL operations is a key requirement. To do this, public-key cryptographic operations using SSL handshake protocol is employed. The IBM e-business Cryptographic Accelerator is a hardware cryptographic solution that off-loads this compute-intensive public-key cryptographic processing from the host.
The overall operation control, including command decoding, is implemented in hardware and requires no on-card microprocessor subsystem. As such, the adapter is a less expensive alternative to those who do not need the high security of the on-card secure programming environment such as is offered by the PCI Cryptographic Coprocessor(#4958), but do need the high cryptographic performance that hardware acceleration provides by offloading the host processor.
Note: The IBM e-business Cryptographic Accelerator is only supported by the industry standard PKCS #11 application programming interface (API) Version 2.01, and applications which interface to the PKCS #11 Support Program.

Attributes provided: Data encryption via PCI bus to host
Attributes required: 1 PCI slot
For 7039-651: (#4960)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4961) IBM Universal 4-Port 10/100 Ethernet Adapter

(No Longer Available as of March 31, 2006)
IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long, 64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10 Base-T or 100 Base-T interfaces either half or full duplex. Each port is provided with it's own RJ-45 connector for attachment to standard CAT-3/5 Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u compatible and provides full auto-negotiation for detecting speed and duplex capability across each port. Network boot capability and Network Install Manager (NIM) capability are available using this adapter if no specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) should be considered where maximum port density is required per I/O card slot. But, for high end systems, where card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions. Below are some performance factors to consider when choosing the right adapter for your needs. These performance comparisons are based on all four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) being active.

With all four ports under full bandwidth conditions, a single IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver up to 3 times the comparable performance of a single IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968).
Under most conditions, each port of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to perform at greater than 50% the throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968).

Note: The resulting performance in your environment compared to the above may vary and depends upon the RS/6000 model, the I/O configuration, and associated workload of your applications.

Attributes provided: 4 ports of 10/100 Base-Tx Ethernet
Attributes required: 1 PCI slot
For 7039-651: (#4961)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4962) 10/100 Mbps Ethernet PCI Adapter II

(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports:

Half / Full Duplex 10/100 Mbps Ethernet interface
10/100 Mbps data rates
Auto-negotiation for 10/100 speed and half/full duplex
Network boot capability and Network Install Manager (NIM)
IEEE 802.3 Ethernet Specification
IEEE 802.3u Fast Ethernet Specification

After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This support is provided with AIX 5.1 (with appropriate software updates)and later software. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. If you are running with AIX 5.1, to invoke the IP Security function on the adapter, you must obtain AIX 5.1 software updates IY27069 and IY26514 or the 5100-02 Recommended Maintenance package. These updates can be obtained by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD (LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.

Attributes provided: One 10/100 Mbps Ethernet port (connector)
Attributes required: One PCI slot
For 7039-651: (#4962)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both of these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software.
(#4963) PCI Cryptographic Coprocessor (FIPS-4)

(No Longer Available as of February 8, 2005)
The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter which combines hardware and software to provide a wide variety of security services. The PCI Cryptographic Coprocessor (FIPS-4) is a second generation adapter of the Cryptographic Coprocessor family that provides high performance secure hardware engines for secure internet transactions such as transmitting data, verifying electronic signatures, bulk data encryption and decryption. In addition, the card is enclosed in a tamper proof enclosure to restrict access to on card resources, designed to FIPS 140-1 Level 4 standards.
Security functions supported by the adapter include:

DES (Data Encryption Standard) (40 and 56 bit key) encryption and decryption, with pre-and post-padding; the coprocessor uses both ECB (electronic and codebook) and CBC (cipher block chain) modes of encryption.
MAC (Message Authentication) generation and MAC verification services
Triple DES (three key) encryption and decryption of eight-byte units
Secure RSA key-pair generation
RSA signature generation and signature verification at 18 signatures/sec at 2048 bits
Hardware random number generation
Secure data storage and retrieval
Other non-cryptographic security utilities can be carried out using the onboard processor

As part of this adapter's physical security features, the following events will cause an adapter shutdown and secure data zeroization.

Shipping/Storage Temperature less than -15C or greater than 95C
Dead Battery (VBAT less than 2.4V)
Supply Voltage greater than 3.3V/12V max
Mesh Sensor opens/shorts detection
X-ray exposure

IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from the http://www.ibm.com/security/cryptocards Web site:

PKCS #11 Version 2.01, an implementation of the industry-standard API
IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.

Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to Web site

http://www.ibm.com/security/cryptocards.

For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page:

http://www.ibm.com/security/cryptocards

Limitations:

The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements.
Attributes provided: Data encryption via PCI bus to host
Attributes required: 1 PCI slot
For 7039-651: (#4963)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#4964) PCI Cryptographic Coprocessor

The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter combining hardware and software designed to provide high performance hardware engines for secure internet transactions such as data exchange, verifying electronic signatures, bulk data encryption and decryption. Cryptographic processes are performed within a tamper resistant enclosure on the adapter that is designed to meet FIPS PUB 140-1 standard for commercial cryptographic devices at Level 3.
Security functions supported by the adapter includes:

Data Encryption Standard (DES) (56 and 40 bit keys) encryption and decryption, with pre- and post-padding; the coprocessor uses both electronic and codebook (ECB) and cipher block chain (CBC) modes of encryption.
Message Authentication (MAC) and financial PIN processing
Triple DES encryption and decryption of general data
RSA key-pair generation
RSA signature generation and signature verification
Secure Hashing Algorithm (SHA-1) in hardware
Hardware random number generation
Protected data storage and retrieval
Other non-cryptographic security utilities can be carried out using the onboard processor

IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from:

http://www.ibm.com/security/cryptocards

PKCS #11 Version 2.01, an implementation of the industry-standard API
IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.

Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to:

http://www.ibm.com/security/cryptocards.

For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page:

http://www.ibm.com/security/cryptocards

Limitations:

The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements.

Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements:

http://www.ibm.com/servers/aix/os/adapters/51.html

Attributes provided: Data encryption via PCI bus to host
Attributes required: 1 PCI slot
For 7039-651: (#4964)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3 )
OS level required: AIX V5.1 or higher. For Linux informaion, refer to:
http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5005) Software Preinstall

Licensed programs may be preinstalled on the media selected. To order this option, specify code (#5005) on the initial system order. The preinstalled licensed programs will be at the same release level as programs being shipped from the Program Libraries at the time the system is manufactured.

Attributes provided: None
Attributes required: None
For 7039-651: (#5005)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#5511) 8-Way 1.1GHz POWER4 Processor, 128MB L3 Cache and System Planar

(No Longer Available as of December 31, 2003)
This feature includes an 8-Way 1.1GHz POWER4 Processor, 128MB L3 Cache and System Planar. The multi-chip module (MCM) provides eight 1.1GHz POWER4 processors with 5.6MB of shared Level 2 cache. Four 32MB L3, 400 MHz cache modules provide 128MB of L3 cache. The System Planar incorporates locations for the MCM module, L3 modules, up to four memory cards, three PCI-X slots, RIO Connections for I/O drawer attachment, two 10/100 BaseT ethernet ports, and two RS-232 serial ports.

Attributes provided: 8-Way 1.1GHz POWER4 Processor, 128MB L3 Cache and System Planar
Attributes required: 7039-651 Model
For 7039-651: (#5511)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5L for POWER version 5.1 with the 5100-03 Recommended Maintenance package (APAR IY32749) or later.
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#5513) 4-Way 1.3GHz POWER4 Processor, 128MB L3 Cache and System Planar

(No Longer Available as of December 31, 2003)
This feature includes an 4-Way 1.3GHz POWER4 Processor, 128MB L3 Cache and System Planar. The multi-chip module (MCM) provides four 1.3GHz POWER4 processors with 5.6MB of shared Level 2 cache. Four 32MB L3, 433 MHz cache modules provide 128MB of L3 cache. The System Planar incorporates locations for the MCM module, L3 modules, up to four memory cards, three PCI-X slots, RIO Connections for I/O drawer attachment, two 10/100 BaseT ethernet ports, and two RS-232 serial ports.

Attributes provided: 4-Way 1.3GHz POWER4 Processor, 128MB L3 Cache and System Planar
Attributes required: 7039-651 Model
For 7039-651: (#5513)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5L for POWER version 5.1 or later with the 5100-03 Recommended Maintenance package (APAR IY32749).
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#5515) - 8-Way 1.5GHz POWER4+ Processor, 128MB L3 Cache and System Planar

(For IBM, No Longer Available as of March 31, 2004)
This feature includes an 8-Way 1.5GHz POWER4+ Processor, 128MB L3 Cache and System Planar. The multi-chip module (MCM) provides four 1.5GHz POWER4+ processors with 5.6MB of shared Level 2 cache. Four 32MB L3, 567 MHz cache modules provide 128MB of L3 cache. The System Planar incorporates locations for the MCM module, L3 modules, up to four memory cards, three PCI-X slots, RIO-2 Connections for I/O drawer attachment, two 10/100 BaseT ethernet ports, and two RS-232 serial ports.

Attributes provided: 8-Way 1.5GHz POWER4+ Processor, 128MB L3 Cache and System Planar
Attributes required: 7039-651 Model
For 7039-651: (#5515)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5.1 or Later
Initial Order/MES/Both/Supported: Initial Order Only
CSU: No
Return parts MES: No

(#5518) - 4-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar

(No Longer Available as of November 18, 2005)
This feature includes an 4-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar. The multi-chip module (MCM) provides four 1.7GHz POWER4+ processors with 5.6MB of shared Level 2 cache. Four 32MB L3, 567 MHz cache modules provide 128MB of L3 cache. The System Planar incorporates locations for the MCM module, L3 modules, up to four memory cards, three PCI-X slots, RIO-2 Connections for I/O drawer attachment, two 10/100 BaseT ethernet ports, and two RS-232 serial ports.

Attributes provided: 4-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar
Attributes required: 7039-651 Model
For 7039-651: (#5518)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5.1 or Later
Initial Order/MES/Both/Supported: Initial Order Only
CSU: No
Return parts MES: No

(#5519) 8-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar

(No Longer Available as of November 18, 2005)
This feature includes an 8-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar. The multi-chip module (MCM) provides the processors with 5.6MB of shared Level 2 cache. Four 32MB L3, 567 MHz cache modules provide 128MB of L3 cache. The System Planar incorporates locations for the MCM module, L3 modules, up to four memory cards, three PCI-X slots, RIO-2 Connections for I/O drawer attachment, two 10/100 BaseT ethernet ports, and two RS-232 serial ports.

Attributes provided: 8-Way 1.7GHz POWER4+ Processor, 128MB L3 Cache and System Planar
Attributes required: 7039-651 Model
For 7039-651: (#5519)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5L V5.1 with the 5100-05 Recommended Maintenance package (APAR IY48486), or later, or AIX 5L V5.2 with the 5200-02 Recommended Maintenance package (APAR IY48488), or later
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter

The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connection with throughput on a standard shortwave multimode optical cable which conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
Not allowed in Slot 3.

Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN.
Attributes required: One available PCI or PCI-X card slot
For 7039-651: (#5700)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX 5.2 with the 12/2002 or later Update CD. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex Gigabit Ethernet adapter designed with highly integrated components to optimize cost and performance. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64 bit PCI-X card slot.
Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.
Not allowed in Slot 3.

Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN.
Attributes required: One available PCI or PCI-X card slot
For 7039-651: (#5701)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX 5.2 with the 12/2002 or later Update CD. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.
A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex (HDX) mode.

Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s).
Attributes required: One available PCI or PCI-X card slot
For 7039-651: (#5706)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter

The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.

Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s).
Attributes required: One available PCI or PCI-X card slot
For 7039-651: (#5707)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5710) PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter

(No Longer Available as of March 31, 2006)
The PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter (#5710) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.), up to twice the maximum data transfer rate of the previous Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices can run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.
Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter.
The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate. The two external ports also provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also the two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Blind Swap Adapter (#5710) is a native boot adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or RS/6000 systems. The adapter also supports target mode.
Limitations:

The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105.
Even though the Dual Channel Ultra320 SCSI RAID Blind Swap Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
Attributes required: One available 3.3 volt PCI or PCI-X slot
For 7039-651: (#5710)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5711) PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter

The PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter (#5711) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 40 MByte fast-write cache is provided as a resident part of this adapter. The 40 MByte fast-write cache is resident on the Dual Channel Ultra320 SCSI RAID Blind Swap Adapter and utilizes non-volatile RAM. The 40 MByte fast-write cache can provide an significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.
The Dual Channel Ultra320 SCSI RAID Blind Swap Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.
When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or external ports) are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrety. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors.
Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI RAID Blind Swap Adapter.
The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate configured as either a non-array or an array of disks Also the two external ports provide non-array connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.
Limitations:

The two external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only non-array configuration support.
The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105.
Even though the Dual Channel Ultra320 SCSI RAID Blind Swap Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
Disk drives internal to the pSeries system shipped prior to September 1, 2003, require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Attributes provided: Attachment of internal and external SCSI devices
Attributes required: One PCI or PCI-X bus slot
For 7039-651: (#5711)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5716) 2 Gigabit Fibre Channel PCI-X Adapter

The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.
Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required order Feature Code #6239- 2 Gigabit Fibre Channel PCI-X Adapter.
Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

Attributes provided: 1 Fibre Channel/FC-AL interface
Attributes required: 1 empty PCI or PCI-X slot
For 7039-651: (#5716)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later, AIX 5.2 or later. For Linux, refer to the following URL for systems and features that operate with Linux:
http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5718) - 10 Gigabit Ethernet-SR PCI-X Adapter

Provides 10 Gigabit Ethernet PCI-X based server connections. Supports distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um multimode fiber. Adapter connector type is LC.

Attributes provided: Conforms to the IEEE 802.3ae standard
Attributes required: Supported on PCI-X slots only
For 7039-651: (#5718)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1 )
OS level required: AIX v5.2 or higher Linux - Refer to the following URL for systems and features that operate with Linux:
http://www.ibm.com/servers/eserver/pseries/ hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter

Offers 10 Gigabit Ethernet PCI-X based server connections over a maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um single-mode fiber optic cables and uses a SC connector type for connecting into net-work infrastructure components like 10 Gigabit Ethernet switch/router with SC connectors.

Attributes provided: 10 Gigabit Ethernet connections
Attributes required: Available PCI-X slot
For 7039-651: (#5719)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1 )
OS level required: AIX V5.2 or higher. For Linux information, refer to the following Web site:
http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#5723) 2 Port Asynchronous EIA-232 PCI Adapter

Connection for 2 Asynchronous EIA-232 devices. Ports are Programmable to support EIA-232 protocols, at a line speed of 128K bps.

Attributes provided: 2 Asynchronous Ports
Attributes required: One PCI Slot
For 7039-651: (#5723)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3 )
OS level required: AIX V5.2 or higher. For Linux information, refer to the following Web site:
http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6199) DC Power Converter Assembly, CEC

(No Longer Available as of December 31, 2004)
This feature converts power from the bulk power assembly to the voltage levels required within the CEC.

Attributes provided: CEC Power Converter
Attributes required: 7039-651 CEC
For 7039-651: (#6199)

Minimum required: 1
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#6203) PCI Dual Channel Ultra3 SCSI Adapter

(No Longer Available as of December 12, 2003)
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64-bit adapter and is an excellent solution for high-performance SCSI applications. The PCI Dual Channel Ultra3 SCSI Adapter provides two SCSI channels (busses). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external and will support a data rate of up to 160 MBytes per second, up to twice the maximum data transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes per second).
In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this Ultra3 160 MBytes per second performance, all attaching devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2 and Ultra3 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface at the lower SE bus data rate of the device.
Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE subsystems to allow connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external port of this adapter, the SCSI port will auto-throttle to a "Fast" interface speed running no faster than 20MB/s maximum. This auto- throttle function is performed to ensure best signal quality between host adapter and attaching subsystem. The second external port is unaffected unless a SE subsystem is also attached to it. If so, it would also auto- throttle as described above.
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the supported pSeries or RS/6000 systems.

Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
Attributes required: One available PCI slot
For 7039-651: (#6203)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6204) PCI Universal Differential Ultra SCSI Adapter

(No Longer Available as of December 30, 2005)
The PCI Universal Differential Ultra SCSI Adapter is the latest technology advancement of an RS/6000 SCSI-2 differential adapter with a maximum data transfer rates of 40 MBytes per second. This adapter has the capability to be plugged into the newer +3.3 volt PCI slots as well as the older +5 volt PCI slots. Feature code # 6204 allows connection to external differential SCSI-2 F/W or Ultra SCSI type devices up to 25 meters away. Feature code # 6204 will negotiate with each external device and transfer data at the fastest SCSI data transfer rate capable by the external device. Check system sales pages as to which external differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048).

Attributes provided: 15 external SCSI-2 addresses
Attributes required: 1 PCI slot.
For 7039-651: (#6204)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6228) 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus

(No Longer Available as of August 8, 2003)
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a 64-bit address/data, short form factor PCI adapter with LC type external fiber connectors that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus will auto-negotiate for the highest data rate (either 1Gps or 2Gps) of which the device or switch is capable. Distances of up to 500 meters running at 1Gbps data rate and up to 300 meters running at 2Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1Gps or 2Gps data rates.
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC Fibre Channel Conversion Cable (#2456) is required.
Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

Attributes provided: 1 FC/FC-AL interface
Attributes required: 1 empty PCI slot
For 7039-651: (#6228)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6230) - Advanced SerialRAID Plus Adapter

(No Longer Available as of June 24, 2005)
The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop) Serial Storage Architecture (SSA) adapter providing an instantaneous data transfer rate of up to 160 MByte/s per loop. It also provides eight- initiator, non-RAID capability, two-initiator RAID 1, two-initiator RAID 0 + 1, two-initiator RAID 5, or one-initiator RAID 0 capability. The adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that improves write performance in RAID 0+1, RAID 5, and non-RAID applications. When the 32 MByte Fast-Write Cache Option Card is used, the adapter can be configured in either single or dual initiator fast- write cache mode. In dual initiator fast-write cache mode, if one of the two adapters fail, the failing adapter is designed to transfer control over to the other. Also, in dual initiator Fast Write Cache mode, the 128 MByte DRAM Option Card (#6231) is available and required to utilize the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte DRAM Option Card is not used in dual initiator fast-write cache mode, the effective fast-write cache capacity will be 16 MBytes on each adapter. See the 128 MByte DRAM Option Card (#6231) for information.
The Advanced SerialRAID Plus Adapter when operated in a RAID 5 configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. When operated in a RAID 1 or RAID 0+1 configuration, will support up to eight disk drives mirrored. The adapter also supports Hot Spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter also supports connectivity to external disk enclosures and internal RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also supported (Refer to IBM 7133 Sales literature for additional information)
Any supported RS/6000 system can be set up to boot from an Advanced SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included as part of the configuration. Other disks associated with the adapter can be RAID but at least one disk must be a non-RAID SSA disk. The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. If your system is running with AIX 4.3.3 or later software, native boot capability is supported. For factory system orders with AIX preload requested, an internal SCSI disk drive will be preloaded as the native boot disk even if internal SSA disk drive(s) are present. If your system is running with AIX 4.2.1 or AIX 4.3.2 software, the below procedure applies in order to boot using the Advanced SerialRAID Plus Adapter:

The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit.
A supported AIX version of software (with proper updates) must be loaded to the non-RAID SSA disk using AIX's Network Install Manager (NIM) before booting from the non-RAID disk.
The system with a non-RAID SSA disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation.
Once AIX with updates is installed on the non-RAID SSA disk and the system is configured for booting, booting will take place from the boot disk without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time.

After October 3, 2000, a 3-Way Copy Function will be available. This 3-Way Copy Function allows a user to create a third copy to an existing RAID-1 or RAID 0+1 array while mirrored operation continues. 3-Way Copy allows the user, at any time after the copy process has completed, to split the third copy off from the original RAID-1 or RAID 0+1 array to form an independent RAID copy. This third copy or "snapshot" copy could be typically used to perform a backup or to test some new application. The 3-Way Copy Function is available only via a code download and can only be gained by going to the SSA web support pages defined below.
When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems. These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system.

http://www.storage.ibm.com/hardsoft/products/ssa/

The above link contains links to SSA publications and other SSA Web sites, including the one below.

http://www.storage.ibm.com/hardsoft/products/ssa/ rs6k/index.html

The above link contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments.
LIMITATION: Internal ports on the adapter are not supported. See machine/model specific information to determine if internal SSA disk drives and associated hardware/cables are supported.

Attributes provided: Attachment of SSA devices
Attributes required: One PCI bus slot
For 7039-651: (#6230)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6231) - 128 MByte DRAM Option Card

(No Longer Available as of June 24, 2005)
The 128 MByte DRAM Option Card (#6231) is a field only optional feature to the Advanced SerialRAID Adapter (#6225) or a factory or field option for the Advanced SerialRAID Plus Adapter (#6230). This option is recommended for dual initiator fail-over Fast Write Cache (FWC) configurations. The option increases the existing DRAM on the adapter to 128 MBytes. In this type of dual initiator FWC configuation, the existing DRAM does not have enough capacity to completely contain a copy of each adapter's 32 MByte FWC and also provide additional working space. The 128 MByte DRAM Option Card provides this additional space needed to contain a full copy of each adapters 32 MByte FWC content and allows for full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card (#6231) is not used with dual-initiator FWC configurations, the effective FWC capacity is reduced to 16 MBytes per adapter.
If this feature is ordered as a field upgrade to an existing SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software and publications are also provided.

Attributes provided: 128 MByte DRAM memory
Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card (#6235) is also recommended.
For 7039-651: (#6231)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6235) - 32 MByte Fast-Write Cache Option Card

(No Longer Available as of June 24, 2005)
The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast- write optional feature that plugs into the IBM RS/6000 Advanced SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus (#6230). It utilizes non-volatile RAM. During the unlikely event of an Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter helping to insure data integrity. The 32 MByte Fast-Write Cache Option Card can provide a significant improvement of data throughput and response time during certain sequence write operations compared to SSA RAID adapters without the fast-write cache. The response time and data transfer improvement using the optional card will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (#6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single- initiator or dual initiator configurations.

Attributes provided: None
Attributes required: One Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230).
For 7039-651: (#6235)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5.1 or later
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6236) DC Power Converter Assembly, CEC

This feature converts power from the bulk power assembly to the voltage levels required within the CEC.

Attributes provided: CEC Power Converter
Attributes required: 7039-651 CEC
For 7039-651: (#6236)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

Note: #6236 may be added as an MES to p655 servers with POWER4+ processors (#5515 and #5518) to enable the memory configurations of 4x 8GB or 4x 16GB. #6236 is required for p655 servers with #5519.

(#6239) 2 Gigabit Fibre Channel PCI-X Adapter

(No Longer Available as of December 30, 2005)
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gbps or 2 Gbps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber onnector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

Attributes provided: 1 Fibre Channel/FC-AL interface
Attributes required: 1 empty PCI or PCI-X slot
For 7039-651: (#6239)

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux:

www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html

Initial Order/MES/Both/Supported: MES
CSU: No
Return parts MES: No

(#6420) 2 Link Switch Network Interface (p655)

The 2 Link Switch Network Interface (SNI) for the p655 provides the attachment to the pSeries High Performance Switch (HPS). The 2 Link SNI plugs into the GX slot (occupies PCI-X slot position 1) of the p655. Connection to the HPS is accomplished by using the copper switch cable features.

Attributes provided: 2 Link SNI to attach to the HPS
Attributes required: Available GX slot in the p655
For 7039-651: (#6420)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: AIX 5L for POWER Version 5.2 with the 5200-02 Recommended Maintenance package or later.
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#6430) Service Support Processor

(No Longer Available as of November 18, 2005)
This feature provides the Service Support Processor for the 7039-651.

Attributes provided: Service Support Processor
Attributes required: 7039-651
For 7039-651: (#6430)

Minimum required: 1
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#6437) Dual SNI Link to Single SNI Link Converter

(No Longer Available as of June 25, 2004)
The Dual SNI Link to Single SNI Link Converter is used in conjunction with the 2 Link SNI features #6432 and #6420 to create an SNI package that has only one link. This feature enables customers to connect more servers to the High Performance Switch, when the customer is interested in connectivity compared to switch bandwidth. #6437 is a hardened wrap for one of the SNI Links on the #6432 (Q4 is wrapped) or on #6420 (Q2 is wrapped).

Attributes provided: Dual to Single Link SNI Converter
Attributes required: Available 2 Link SNI Feature
For 7039-651: (#6437)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

Note: Requires one #6420.

(#6569) ULTRA320 SCSI Backplane, two position

(No Longer Available as of November 18, 2005)
This feature provides a backplane capable of attaching two Ultra320 SCSI disk drives.

Attributes provided: Two position Disk Backplane
Attributes required: 7039-651 CEC
For 7039-651: (#6569)

Minimum required: 1
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#6591) Dual CEC side by side Mounting Enclosure

This feature provides a Dual CEC side by side Mounting Enclosure to house one or two 7039-651 CECs. Single CECs within the mounting enclosure are located on the left side (as viewed from the front of the 7040-W42 rack.) If there is no second CEC within the Mounting Enclosure, a Node/CEC airflow filler is included.

Attributes provided: Dual CEC side by side Mounting Enclosure
Attributes required: Empty 4U drawer
For 7039-651: (#6591)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8120) Attachment Cable, Hardware Management Console to Host, 6-Meter

This 6-meter cable provides an asynch connection between the HMC (Hardware Management Console) and the host system. It provides a 9-pin female connector for HMC connection and a 9-pin male connection to attach to the HMC port on the host system. A 9-pin to 25-pin adapter is also provided.

Attributes provided: 6-meter HMC attachment cable
Attributes required: Empty 9-pin asynch port on HMC
For 7039-651: (#8120)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8121) Attachment Cable, Hardware Management Console to Host, 15-Meter

This 15-meter cable provides an asynch connection between the HMC (Hardware Management Console) and the host system. It provides a 9-pin female connector for HMC connection and a 9-pin male connection to attach to the HMC port on the host system. A 9-pin to 25-pin adapter is also provided.

Attributes provided: 15-meter HMC attachment cable
Attributes required: Empty 9-pin asynch port on HMC
For 7039-651: (#8121)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: No Max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8398) SP Switch2 PCI-X Attachment Adapter

(No Longer Available as of November 18, 2005)
This adapter allows attachment to the SP Switch2 through the PCI-X bus. It also includes diagnostics and publications.

Attributes provided: Interconnection to SP Switch2
Attributes required: PCI-X slot, plus SP Switch2 fabric on the Cluster running PSSP (IBM Parallel System Support Programs for AIX.)
For 7039-651: (#8398)

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: AIX 5L for POWER version 5.1 with the 5100-03 Recommended Maintenance package (APAR IY32749).
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

Note: The 7039-651 with FC 8398 requires PSSP V3.4 or PSSP V3.5.

(#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P

This feature provides a USB attached US English #103P keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8800)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8801) Quiet Touch Keyboard - USB, Business Black, French, #189

This feature provides a USB attached French #189 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8801)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142

This feature provides a USB attached Italian #142 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8802)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8803) Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129

This feature provides a USB attached German/Austrian #129 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8803)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166

This feature provides a USB attached UK English #166 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8804)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172

This feature provides a USB attached Spanish #172 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8805)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194

This feature provides a USB attached Japanese #194 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8806)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171

This feature provides a USB attached LA Spanish #171 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8829)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445

This feature provides a USB attached French Canadian #445 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8835)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443

This feature provides a USB attached Russian #443 keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8838)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P

This feature provides a USB attached US English #103P (EMEA) keyboard.

Attributes provided: Keyboard
Attributes required: USB Port
For 7039-651: (#8840)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#8841) Mouse - Business Black with Keyboard Attachment Cable

This feature provides a three button mouse and a cable for attachment to a keyboard.

Attributes provided: 3-Button Mouse
Attributes required: Keyboard with Mouse Attachment Port
For 7039-651: (#8841)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9004) Southern Hemisphere Designator for Monitors

Specifies that southern hemisphere models are required for all monitors on the initial plant order or on MES orders.

Attributes provided: None
Attributes required: Monitor
For 7039-651: (#9004)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9300) Language Group Specify - US English

English language group for nomenclature and standard publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9300)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9703) Language Group Specify - French

French language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9703)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9704) Language Group Specify - German

German language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9704)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9705) Language Group Specify - Polish

Polish language group for Nomenclature and Standard Publications.

Attributes provided: none
Attributes required: none
For 7039-651: (#9705)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9707) Language Group Specify - Portuguese

Portuguese language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9707)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9708) Language Group Specify - Spanish

Spanish language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9708)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9711) Language Group Specify - Italian

Italian language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9711)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9712) Language Group Specify - Canadian French

Canadian French language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9712)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9714) Language Group Specify - Japanese

Japanese language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9714)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9715) Language Group Specify - Traditional Chinese (Taiwan)

Traditional Chinese language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9715)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9716) Language Group Specify - Korean

Korean language group for Nomenclature and Standard Publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9716)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9718) Language Group Specify - Turkish

Turkish language group for nomenclature and publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9718)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9719) Language Group Specify - Hungarian

Hungarian language group for Nomenclature and Standard Publications.

Attributes provided: none
Attributes required: none
For 7039-651: (#9719)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9720) Language Group Specify - Slovakian

Slovakian language group for Nomenclature and Standard Publications.

Attributes provided: none
Attributes required: none
For 7039-651: (#9720)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9721) Language Group Specify - Russian

Russian language group for nomenclature and standard publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9721)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9722) Language Group Specify - Simplified Chinese (PRC)

Simplified Chinese language group for nomenclature and standard publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9722)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9724) Language Group Specify - Czech

Czech language group for nomenclature and standard publications.

Attributes provided: None
Attributes required: None
For 7039-651: (#9724)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: Does not apply
Return parts MES: Does not apply

(#9800) Power Cord Specify - United States/Canada

The following countries use the #9800 power cord to power the system unit and/or peripheral features requiring a power cord.

DOM U.S.
649 CANADA
832 SAUDI ARABIA
619 BAHAMAS
621 BARBADOS
627 BERMUDA
629 BOLIVIA
631 BRAZIL
661 COLOMBIA
663 COSTA RICA
681 DOMINICAN REPUBLIC
683 ECUADOR
829 EL SALVADOR
731 GUATEMALA
640 GUYANA
735 HONDURAS
759 JAMAICA
781 MEXICO
791 NETHERLANDS ANTILLES
811 PANAMA
843 SURINAM
859 TRINIDAD
871 VENEZUELA
760 JAPAN
761 JAPAN (PDS)
766 KOREA
818 PHILIPPINES
858 TAIWAN

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9800)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9802) - Power Cord Specify - Brazil (125V, 15A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9802)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Does not apply
Return parts MES: Does not apply

(#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9820)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9821) Power Cord Specify - Denmark (250V, 10A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9821)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9825) Power Cord Specify - United Kingdom (250V, 13A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9825)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9827) Power Cord Specify - Israel (250V, 6-16A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9827)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9828) Power Cord Specify - Switzerland (250V, 10A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9828)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9829)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9830) Power Cord Specify - Italy/Chile (250V, 10A and 16A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9830)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9831) Power Cord Specify - Australia/New Zealand/Argentina (250V, 10A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9831)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9833) Power Cord Specify - Thailand (250V, 15A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9833)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

(#9834) Power Cord Specify - Uruguay (250V, 10A)

Attributes provided: power cord
Attributes required: None
For 7039-651: (#9834)

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: No
Return parts MES: No

Feature Exchanges

Not available.
Back to top

Accessories

None.
Customer Replacement Parts

None.
Back to top

Machine Elements

None.
Back to top

Supplies

None.
Diskettes

None.
Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2005.
Back to top