Model 6E3 and Model 6C3
Summary of standard features:
- 1-way and 2-way SMP design (one processor card)
- 1.2 or 1.45 GHz POWER4+ SMP design (one processor card)
- 8 MB of L3 cache per processor
- 1 GB of ECC SDRAM memory:
- Eight hot-swap disk drive bays -- two four packs
- Four standard and four optional
- Three media bays:
- One DVD-ROM (optional)
- One diskette drive (optional)
- One DVD-RAM or Tape drive (optional)
- Six Hot-swap PCI-X slots:
- Four 64-bit, 3.3 volt, 133 MHz (long)
- Two 32-bit, 3.3 volt, 66 MHz (short)
- One 4-pack disk drive enclosure
- Integrated:
- One 10/100 Ethernet
- One 10/100/1000 Ethernet
- Two Ultra320 SCSI controllers (internal)
- Service processor
- Hot-swap and Redundant fans
- One parallel port
- Three serial ports (Front serial port available on Model 6C3 only)
- Keyboard and mouse ports
- One hot-swap power supply (Redundant power optional)
- AIX V5.1 or V5.2 or later, SuSE Linux Enterprise Server 8 for iSeries
or pSeries Systems, or later, or Red Hat Enterprise Linux Advanced Server
3 for pSeries, or later.
The minimum Model 6E3 or Model 6C3 configuration must include a
processor, memory, power supply hard disk, and a disk drive enclosure, a
language group specify, and a power cord specify. The defaults, if no
choice is made, are:
Processor 1-way, 1.2 GHz (#5220)
Memory 1 GB memory DIMM (#4446)
Power supply Base (#6266)
Disk drive 36.4 GB hard drive (#3273)
4-pack disk drive enclosure (#6574)
Language group specify (#93xx)
Power Cord Specify (#98xx/#9911 for Model 6C3)
A keyboard, mouse, graphics adapter, and monitor are available as
options.
IBM eServer pSeries 615 Model 6C3 and 6E3 Express
Configurations
All orders for the IBM eServer pSeries 615 Models 6C3 and 6E3 will be
fulfilled through express configurations.
All express configurations consist of a standard configuration that
must be part of the order.
These configurations must include at a minimum the hardware features
listed, ordered together as specified.
You may make upgrades to the standard features as needed.
Express Configuration (110C for Model 6C3, 110E for Model
6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(110C or 110E) (#8167)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 1024 MB Memory DIMMS (#8156)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Express Configuration (224C FOR Model 6C3, 224E for Model
6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(224C or 224E) (#8188)
- One 2-way POWER4+ 1.45 GHz processor (#8187)
- One 2048 MB Memory DIMMS (#8157)
- Two 73.4 GB hot-swap disk drives (#3274)
- One four-pack disk enclosure (#6574)
- One ac power supply (#6266)
- One language group specify (#9xxx)
- One power cord specify (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- The minimum configuration may change depending on the features
ordered.
Linux Ready Express Configuration (225C FOR Model 6C3, 225E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for express configuration pSeries 615X
(225C or 225E) (#8191)
- One 2-way POWER4+ 1.45 GHz processor (#8187)
- One 2048 MB Memory DIMMS (#8157)
- Two 73.4 GB hot-swap disk drives (#3274)
- One diskette (#2611)
- One four-pack disk enclosure (#6574)
- One ac power supply (#6266)
- One language group specify (#9xxx)
- One power cord specify (#99xx ([6C3 only) / #98xx)
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- The minimum configuration may change depending on the features
ordered.
Express Configuration (244C for Model 6C3, 244E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(244C or 244E) (#8189)
- One 2-way POWER4+ 1.45 GHz processor (#8187)
- One 4096 MB memory DIMMs (#8158 or #8155)
- Two 73.4 GB hot-swap disk drives (#3274)
- One four-pack disk enclosure (#6574)
- One ac power supply (#6266)
- One language group specify (#9xxx)
- One power cord specify (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- The minimum configuration may change depending on the features
ordered.
Linux Ready Express Configuration (245C for Model 6C3, 245E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615X
(245C or 245E) (#8192)
- One 2-way POWER4+ 1.45 GHz processor (#8187)
- One 4096 MB memory DIMMs (#8158 or #8155)
- Two 73.4 GB hot-swap disk drives (#3274)
- One diskette (#2611)
- One four-pack disk enclosure (#6574)
- One ac power supply (#6266)
- One language group specify (#9xxx)
- One power cord specify (#99xx (6C3 only) / #98xx)
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- The minimum configuration may change depending on the features
ordered.
Express Configuration (284C for Model 6C3, 284E for Model
6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(284C or 284E) (#8190)
- One 2-way POWER4+ 1.45 GHz processor (#8187)
- One 8192 MB memory DIMMs (#8159)
- Two 73.4 GB hot-swap disk drives (#3274)
- One four-pack disk enclosure (#6574)
- One ac power supply (#6266)
- One language group specify - (#9xxx)
- One power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- The minimum configuration may change depending on the features
ordered.
Linux Ready Express Configuration (285C for Model 6C3, 285E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615X
(285C or 285E) (#8193)
- One 2-way POWER4+ 1.45 GHz processor (#8187)
- One 8192 MB memory DIMMs (#8159)
- Two 73.4 GB hot-swap disk drives (#3274)
- One diskette (#2611)
- One four-pack disk enclosure (#6574)
- One ac power supply (#6266)
- One language group specify (#9xxx)
- One power cord specify (#99xx (6C3 only) / #98xx)
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- The minimum configuration may change depending on the features
ordered.
Linux-Ready Express Configuration (111C for Model 6C3, 111E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615X
(111C or 111E) (#8160)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 1024 MB Memory DIMMS (#8156)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One Diskette (#2611)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Express Configuration (120C for Model 6C3, 120E for Model
6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(120C or 120E) (#8169)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 2048 MB Memory DIMMS (#8157)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Linux-Ready Express Configuration (121C for Model 6C3, 121E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615X
(121C or 121E) (#8161)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 2048 MB Memory DIMMS (#8157)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One Diskette (#2611)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Express Configuration (140C for Model 6C3, 140E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(140C or 140E) (#8170)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 4096 MB Memory DIMMS (#8158 or #8155)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- Minimum configuration may change depending on features ordered.
Linux-Ready Express Configuration (141C for Model 6C3, 141E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries
610X (141C or 141E) (#8162)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 4096 MB Memory DIMMS (#8158 or #8155)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One Diskette (#2611)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- Minimum configuration may change depending on features savered.
Express Configuration (180C for Model 6C3, 180E for Model
6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(180C or 180E) (#8171)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 8192 MB Memory DIMMS (#8159)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Linux-Ready Express Configuration (181C for Model 6C3, 181E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 615X
(181C or 181E) (#8163)
- One 1-way POWER4+ 1.2 GHz processor (#8148)
- One 8192 MB Memory DIMMS (#8159)
- One 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One Diskette (#2611)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Express Configuration (220C for Model 6C3, 220E for Model
6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(220C or 220E) (#8172)
- One 2-way POWER4+ 1.2 GHz processor (#8149)
- One 2048 MB Memory DIMMS (#8157)
- Two 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Linux-Ready Express Configuration (221C for Model 6C3, 221E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615X
(221C or 221E) (#8164)
- One 2-way POWER4+ 1.2 GHz processor (#8149)
- One 2048 MB Memory DIMMS (#8157)
- Two 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One Diskette (#2611)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Express Configuration (240C for Model 6C3, 240E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(240C or 240E) (#8173)
- One 2-way POWER4+ 1.2 GHz processor (#8149)
- One 4096 MB Memory DIMMS (#8158 or #8155)
- Two 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- Minimum configuration may change depending on features ordered.
Linux-Ready Express Configuration (241C for Model 6C3, 241E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615X
(241C or 241E) (#8165)
- One 2-way POWER4+ 1.2 GHz processor (#8149)
- One 4096 MB Memory DIMMS (#8158 or #8155)
- Two 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One Diskette (#2611)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
Notes:
- The 8xxx feature numbers are mandatory.
- Additional, optional 7029-6C3/6E3 features may be added as desired.
- Upgrades may be made to the minimum configurations, other than
processors and memory.
- Minimum configuration may change depending on features ordered.
Express Configuration (280C for Model 6C3, 280E for Model
6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615
(280C or 280E) (#8175)
- One 2-way POWER4+ 1.2 GHz processor (#8149)
- One 8192 MB Memory DIMMS (#8159)
- Two 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
- One AIX V5.1 or V5.2, or later, license
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Linux-Ready Express Configuration (281C for Model 6C3, 281E for
Model 6E3)
- One 7029-6C3/6E3, including a minimum of:
- One feature number indicator for Express Configuration pSeries 615X
(281C or 281E) (#8166)
- One 2-way POWER4+ 1.2 GHz processor (#8149)
- One 8192 MB Memory DIMMS (#8159)
- Two 73.4 GB hot-swap disk drives (#3274)
- One Four-pack disk enclosure (#6574)
- One Diskette (#2611)
- One AC Power supply (#6266)
- One Language group specify - (#9xxx)
- One Power cord specify - (#99xx (6C3 only) / #98xx)
Note: The 8xxx feature numbers are mandatory.
Note: Additional, optional 7029-6C3/6E3 features may be added as desired.
Note: Upgrades may be made to the minimum configurations, other than
processors and memory.
Note: Minimum configuration may change depending on features ordered.
Reliability, Availability, and Serviceability (RAS)
Reliability, Fault Tolerance, and Data Integrity
The reliability of the Models 6E3 and 6C3 system starts with reliable
components, devices, and subsystems. During the design and development
process, sub-systems go through rigorous verification and integration
testing processes. During system manufacturing, systems go through a
thorough testing process to ensure highest product quality level.
The Models 6E3 and 6C3 system L3 cache and system memory offers ECC
(error checking and correcting) fault-tolerant features. ECC is designed
to correct environmentally induced, single-bit, intermittent memory
failures and single-bit hard failures. With ECC, the likelihood of
memory failures will be substantially reduced. ECC also provides double
bit memory error detection that helps protect data integrity in the event
of a double-bit memory failure. System memory also provides 4-bit packet
error detection that helps to protect data integrity in the event of a
DRAM chip failure. The system bus, I/O bus, and PCI buses are designed
with parity error detection.
Disk mirroring and disk controller duplexing capability are also
provided by the AIX operating system.
The Journaled File System of the AIX operating system maintains file
system consistency and reduces the likelihood of data loss when the
system is abnormally halted due to a power failure.
PCI Extended Error Handling (EEH)(3)
In the past, PCI Bus Parity errors caused a global machine check
interrupt, which eventually required a system reboot to continue. In the
Model 6E3 and 6C3 systems, new I/O drawer hardware, system firmware, and
AIX interaction have been designed to allow transparent recovery of
intermittent PCI bus parity errors and graceful transition to the I/O
device available state in the case of a permanent parity error in the PCI
bus. This mechanism is called the PCI Extended Error Handling (EEH).
EEH-enabled adapters respond to a special data packet generated from the
affected PCI slot hardware by calling system firmware, which will examine
the affected bus, allow the device driver to reset it, and continue
without a system reboot. Currently Linux does not support the EEH
behavior. In the event of a PCI error the system will machine check and
a reboot will be required to continue.
Memory Error Correction Extensions
The standard memory card has single error-correct and double-error
detect ECC circuitry to correct single-bit memory failures. The
double-bit detection helps maintain data integrity by detecting and
reporting multiple errors beyond what the ECC circuitry can correct.
The memory chips are organized such that the failure of any specific
memory module only affects a single bit within an ECC word (bit
scattering) thus allowing for error correction and continued operation
in the presence of a complete chip failure (Chipkill recovery).
Memory card also utilizes memory scrubbing and thresholding to
determine when spare memory modules, if available, within each bank of
memory should be used to replace ones that have exceeded their threshold
value (dynamic bit steering).
Redundancy For Array Self-Healing
Although the most likely failure event in a processor is a soft
single-bit error in one of its caches, there are other events that can
occur, and they need to be distinguished from one another. For the L1,
L2, L3 caches and their directories, hardware and firmware keep track of
whether permanent errors are being corrected beyond a threshold. If
exceeded, a deferred repair error log is created. Additional run-time
availability actions, such as CPU vary off(3), or L3 cache line delete,
are also initiated.
L1, L2 caches and L2, L3 directories on the POWER4+ chip are
manufactured with spare bits in their arrays that can be accessed via
programmable steering logic to replace faulty bits in the respective
arrays. This is analogous to the redundant bit steering employed in main
store as a mechanism to avoid physical repair that is also implemented in
POWER4+ systems. The steering logic is activated during processor
initialization and is initiated by the Built-in system-test (BIST) at
Power On time.
L3 cache redundancy is implemented at the cache line granularity
level. Exceeding correctable error thresholds while running causes
invocation of a dynamic L3 cache line delete function, capable of up to
two deletes per cache. In the rare event of solid bit errors exceeding
this quantity, the cache continues to run, but a message calling for
deferred repair is issued. If the system is rebooted without such
repair, the L3 cache is placed in bypass mode and the system comes up
with this cache deconfigured.
Service Processor
A Service Processor included in the Models 6E3 and 6C3 gives you an
immediate means to diagnose, check status, and sense operational
conditions of a remote system, even when the main processor is
inoperable.
The Service Processor enables firmware and operating system
surveillance(3), several remote power controls, environmental monitoring
(only critical errors are supported under Linux), reset, and boot
features along with remote maintenance and diagnostic activities,
including console mirroring. The Service Processor can place calls to
report surveillance failures, critical environmental faults, and critical
processing faults.
Fault Monitoring Functions
- BIST (built-in self-test) and POST (Power-on self-test) check
processor, L3 cache, memory, and associated hardware required for proper
booting of the operating system, every time the system is powered on. If
a non-critical error is detected or if the errors occur in the resources
that can be removed from the system configuration, the booting process is
designed to proceed to completion. The errors are logged in the system
non-volatile RAM (NVRAM).
- Disk drive fault tracking(3) can alert the system administrator of an
impending disk failure before it impacts customer operation.
- AIX log facility (where hardware and software failures are recorded
and analyzed by Error Log Analysis (ELA) routine)(3) warns the system
administrator about the causes of system problems. This also enables IBM
service representatives to bring along probable replacement hardware
components when a service call is placed, thus minimizing system repair
time.
Mutual Surveillance
The Service Processor can monitor the operation of the firmware during
the boot process, and it can monitor the operating system for loss of
control(3). It also allows the operating system to monitor for Service
Processor activity(3). The Service Processor can take appropriate
action, including calling for service, when it detects the firmware or
the operating system(3) has lost control. Likewise, the operating system
can request a Service Processor repair action, if necessary(3).
Environmental Monitoring Functions
- Temperature monitoring(3) which increases the fan speed rotation when
ambient temperature is above the normal operating range.
- Temperature monitoring(3) which warns the system administrator of
potential environmental related-problems (for example, air conditioning
and air circulation around the system) so that appropriate corrective
actions can be taken before a critical failure threshold is reached, and
to provide orderly system shutdown(3) when operating temperature exceeds
the critical level.
- Fan speed monitoring which provides warning and an orderly system
shutdown when(3) the speed is out of operational specification.
- Voltage monitoring, which provides warning and an orderly system
shutdown when(3) the voltages are out of operational specification.
Error Handling and Reporting
In the unlikely event of system hardware or environmentally-induced
failure, the system Run-time Error Capture capability(3) systematically
analyzes the hardware error signature to determine the cause of failure.
The analysis result will be stored in system NVRAM. When the system can
be successfully rebooted either manually or automatically, the error will
be reported to the AIX operating system. Error Log Analysis (ELA)(3) can
be used to display the failure cause and the physical location of failing
hardware.
With the integrated Service Processor, the system has the ability to
send out automatically an alert via phone line to a pager or call for
service in the event of critical system failure. A hardware fault will
also turn on the two Attention Indicators (one located on the front of
the system unit and the other on the rear of the system unit) to alert
the user of an internal hardware problem. The indicator may also be
turned on by the operator as a tool to allow system identification. For
identification, the indicators will flash whereas the indicator will be
on solid when an error condition occurs.
Availability Enhancement Functions
- Online (Concurrent) Diagnostics with ELA(3) and Service Aids allows
administrators or IBM service representatives to diagnose potential
system malfunctions without interrupting end-user operation.
- The auto-restart (reboot) option, when enabled, can reboot the system
automatically following an unrecoverable software error, software hang,
hardware failure, or environmentally-induced (AC power) failure.
Serviceability
The Models 6E3 and 6C3 are designed for customer setup of the machine
and for subsequent addition of most features (adapters/devices)(3). For
a fee, IBM Service can perform the installation.
- The Models 6E3 and 6C3 allow customers to replace service parts
(Customer Replaceable Unit) if they desire to do so. To accomplish this,
the Models 6E3 and 6C3 have incorporated LEDs that will indicate the
parts needing to be replaced.
- The Models 6E3 and 6C3 allow support personnel to remotely log into a
system to review error logs and perform remote maintenance. The Models
6E3 and 6C3 Service Processor enables the analysis of a system that will
not boot.
- The diagnostics consist of Stand-alone Diagnostics, which are loaded
from the DVD-ROM drive, and Online Diagnostics(3).
- Online Diagnostics(3), when installed, are resident with AIX on the
disk or system. They can be booted in single-user mode (service mode),
run in maintenance mode, or run concurrently (concurrent mode) with other
applications. They have access to the AIX Error Log and the AIX
Configuration Data.
- Service mode allows checking of system devices and features.
- Concurrent mode allows the normal system functions to continue while
selected resources are being checked.
- Maintenance mode allows checking of most system resources.
- The System Management Services (SMS) error log is accessible from the
SMS menu for tests performed through SMS programs. The Service Processor
error log is accessible from the Service Processor menu for results of
Service Processor tests.
Note: Because the 7029-6E3 and 6C3 systems have an optional diskette
drive (#2611), DVD-ROM (#2640), and DVD-RAM (#2623), alternate methods
for maintaining and servicing the system need to be available for use if
the diskette drive, DVD-ROM, and DVD-RAM are not ordered; an external
internet connection must be available to maintain or update system
microcode to the latest required level.
Electronic Service Agent
The Electronic Service Agent(3) is available at no additional charge.
When installed on the pSeries, the Electronic Service Agent can enhance
IBM's ability to provide the system with maintenance service.
The Electronic Service Agent:
- Monitors and analyzes system errors, and if needed, can automatically
place a service call to IBM without customer intervention.
- Can help reduce the effect of business disruptions due to unplanned
system outages and failures.
- Performs problem analysis on a subset of hardware-related problems
and, with customer authorization, can report automatically the results to
IBM Service.
Online Customer Support (OCS)
OCS for hardware problem reporting may be performed via remote login
by pSeries specialists using normal AIX facilities(3). The Electronic
Service Agent software can also be used for this capability.
AIX Support offerings will be under AIXSERV and Electronic Service
Agent.
Note: (3) Indicates that this RAS function is not supported under Linux.
HACMP Solution
For even greater availability and reliability, the Models 6E3 and 6C3
also support IBM High Availability Cluster Multiprocessing (HACMP). This
solution provides a superior base for high availability, an essential
ingredient of e-commerce.
Back to top
Product Positioning
|
With their performance, and SMP capability, the Model 6E3 and Model
6C3 are well-positioned for transaction-intensive server solutions such
as, e-commerce, database, and application database server applications.
The Model 6E3 and Model 6C3 provide 2-way SMP capability, up to 16 GB
of memory, and up to 1174.4 GB of internal DASD, which make an excellent
solution for many demanding commercial applications. It is a
cost-effective performance alternative to the IBM eServer pSeries p610
Models 6E1 and 6C1.
The Model 6E3 and Model 6C3 also offer a variety of high availability
features such as:
- An integrated service processor
- Hot-swap redundant power supply (AC)
- Hot-swap cooling fans and disk drives
- LED Service Identification
- Auto reboot on power loss
High availability continues to be an ongoing and growing need for
customers. IBM continues its tradition of providing high-availability
solutions with the Models 6E3 and 6C3, which can be ordered in a
high-availability configuration with a choice of components.
Back to top
Model
|
Model Summary Matrix
Processor Clock System Internal
Model Type Rate Memory Storage Slots/Bays Type
----- --------- ------- ---------- ----------------- -------------- -----
6C3 POWER4+ 1.2 GHz 1 GB/16 GB 36.4 GB/1174.4 GB 6 slots/7 bays Rack-
1.45GHz standard Mount
Additional 4
optional bays
Customer Setup (CSU)
Yes.
Devices Supported
The following external machine types are supported on the indicated
models for MT 7029.
This list is not all inclusive. Many devices are supported through
standard ports. Please refer to the sales manual of the external machine
type and the list of supported devices in the appropriate section of the
AIX sales manual for further attach support information.
|6| X = SUPPORTED DEVICE
|C|
|3|
MT-MOD | | DESCRIPTION
---------|-|-----------------------------------------
---------+----------SWITCH---------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2031-016 |X| McDATA Model 016 Departmental ES-3032 Fabric Switch
2031-032 |X| McDATA Model 032 Departmental ES-3032 Fabric Switch
2031-216 |X| McData ES-3216 Fabric Switch
2031-224 |X| McData IBM 2031 Model 224 Fabric Switch
2031-232 |X| McData ES-3232 Fabric Switch
2031-L00 |X| McDATA Model L00 ES-1000 Loop Switch
2032-001 |X| McDATA ED-5000 Enterprise Fibre Channel Switch
2032-064 |X| McDATA Model 064 Enterprise Fibre Channel Director
2032-140 |X| 2032 McDATA Intrepid 6140 Enterprise Fibre Channel
| | Director Model 140
2042-001 |X| Inrange FC/9000 64-port Fibre Channel Director
2042-128 |X| Inrange FC/9000 128-port Fibre Channel Director
2042-256 |X| INRANGE FC/9000-256 FC Director
2062-D01 |X| Cisco MDS-9216 Multilayer Fabric Switch
2062-D07 |X| Cisco MDS 9509 Multilayer Director Switch (Data Center
| | Model)
2062-T07 |X| Cisco 9509 Multilayer Director Switch (Telecom Model -
| | DC Power)
2109-F16 |X| IBM TotalStorage SAN Switch Model M16
2109-F32 |X| TotalStorage SAN Switch - 2109 Model F32
2109-M12 |X| IBM TotalStorage SAN Switch Model M12
2109-S08 |X| IBM SAN Fibre Channel Switch Model S08
2109-S16 |X| IBM SAN Fibre Channel Switch Model S16
3534-F08 |X| IBM TotalStorage Storage Area Network (SAN) Model F08
| |
---------+----------DISK-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2104-DU3 |X| Expandable Storage Plus Model DU3
2104-TU3 |X| Expandable Storage Plus Model TU3
2105-800 |X| TotalStorage Enterprise Storage Server Model 800
2105-F10 |X| IBM Enterprise Storage Server Model F10
2105-F20 |X| IBM Enterprise Storage Server Model F20
3542-2RU |X| IBM FAStT200 Storage Server Model 2RU
3542-2RX |X| IBM FAStT200 Storage Server Model 2RU (EMEA)
3552-1RU |X| IBM TotalStorage FAStT500 Storage Server
3552-1RX |X| IBM TotalStorage FAStT500 Storage Server (EMEA)
3560-1RU |X| IBM TotalStorage FAStT EXP500 Storage Expansion Unit
3560-1RX |X| IBM TotalStorage FAStT EXP500 Storage Expansion Unit
| | (EMEA)
7133-D40 |X| IBM Serial Disk System Advanced Model D40
7133-T40 |X| IBM Serial Disk System Advanced Model T40
7204-118 |X| IBM 7204 18.2 GB External Disk Drive Model 118
7204-418 |X| IBM 7204-418 18GB DE External Disk Drive
7204-419 |X| IBM 18.2 GB External Disk Drive Model 419
7204-518 |X| IBM 7204 18 GB External Disk Drive
7204-536 |X| IBM 7204 36 GB External Disk Drive
| |
---------+----------GRAPHICS RELATED-----------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
6093-011 |X| CursorPad Tablet
6093-012 |X| Large Tablet
6093-021 |X| IBM Tablet Model 021
6094-010 |X| Dials
6094-020 |X| LPF Keyboard
6094-030 |X| Spaceball
6094-031 |X| Spaceball
6094-040 |X| Spaceball
6094-600 |X| Magellan Enhanced Input Device
7250-002 |X| POWER GXT1000 Graphics Accelerator
| |
---------+----------DISPLAYS-------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
6546-00E |X| G52 Display
6546-00N |X| G52 Display
6546-01E |X| G52 Display
6546-01S |X| G52 Display
6546-0AE |X| G54 Display
6546-0AN |X| G54 Display
6546-0BE |X| G54 Display
6546-0BN |X| G54 Display
6546-0BS |X| G54 Display
6546-21N |X| G52 Display
6546-2BN |X| G54 Display
6546-31N |X| G52 Display
6546-4AN |X| G54 Display
6546-6BN |X| G54 Display
6555-763 |X| P70 17" COLOR DISPLAY
6555-764 |X| P70 17" COLOR DISPLAY
6555-773 |X| P200 UV-N COLOR MONITOR
6555-774 |X| P200 UV-N COLOR MONITOR
6555-803 |X| P201 UV-N COLOR MONITOR
7315-C01 |X| IBM 7315 Model C01 Hardware Management Console
7316-TF1 |X| IBM 7316-TF1 Rack Mounted Flat Panel Display
7316-TF2 |X| IBM 7316-TF2 Rack Mounted Flat Panel Display
9513-AG2 |X| IBM T55A 15" TFT LCD COLOR MONITOR
9513-AW1 |X| IBM T55A 15" TFT LCD COLOR MONITOR
9516-B03 |X| 16.1" TFT LCD DISPLAY
9516-B04 |X| 16.1" TFT LCD DISPLAY
| |
---------+----------STORAGE NETWORK DEVICES----------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
1722-60U |X| FAStT600 Storage Server
1740-1RU |X| TotalStorage FAStT EXP700 Storage Expansion Unit
1742-1RU |X| TotalStorage FAStT700 Storage Server
1742-90U |X| FAStT900 Storage Server
---------+----------SCSI DEVICES---------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3995-C60 |X| IBM Optical Library Dataserver
3995-C62 |X| IBM Optical Library Dataserver
3995-C64 |X| IBM Optical Library Dataserver
3995-C66 |X| IBM Optical Library Dataserver
3995-C68 |X| IBM Optical Library Dataserver
7209-003 |X| IBM Multifunction Optical Disk Drive Model 003
7210-020 |X| IBM CR-ROM Model 020
7210-025 |X| 4.7GB DVDRAM Drive
7212-102 |X| Storage Device Enclosure
| |
---------+----------TAPE-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3490-F00 |X| IBM Magnetic Tape Subsystem Model F00
3490-F01 |X| IBM Magnetic Tape Subsystem Model F01
3490-F11 |X| IBM Magnetic Tape Subsystem Model F11
3494-B10 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B10
3494-B18 |X| IBM Magstar Virtual Tape Server Model B18
3494-B20 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B20
3494-D12 |X| IBM Magstar Tape Library Model D12
3494-L12 |X| IBM Magstar Tape Library Model L12
3570-B00 |X| IBM Magstar MP Tape Subsystem Model B00
3570-B01 |X| IBM Magstar MP Tape Subsystem Model B01
3570-B02 |X| IBM Magstar MP Tape Subsystem Model B02
3570-B11 |X| IBM Magstar MP Tape Subsystem Model B11
3570-B12 |X| IBM Magstar MP Tape Subsystem Model B12
3570-B1A |X| IBM Magstar MP Tape Drive Model B1A
3570-C00 |X| IBM Magstar MP Tape Drive Model C00
3570-C01 |X| IBM Magstar MP Tape Drive Model C01
3570-C02 |X| IBM Magstar MP Tape Drive Model C02
3570-C11 |X| IBM Magstar MP Tape Drive Model C11
3570-C12 |X| IBM Magstar MP Tape Drive Model C12
3575-L06 |X| IBM Magstar MP Tape Library Dataserver Model L06
3575-L12 |X| IBM Magstar MP Tape Library Dataserver Model L12
3575-L18 |X| IBM Magstar MP Tape Library Dataserver Model L18
3575-L24 |X| IBM Magstar MP Tape Library Dataserver Model L24
3575-L32 |X| IBM Magstar MP Tape Library Dataserver Model L32
3580-H11 |X| Linear Tape Open (LTO) Bridge Box (HVD)
3580-H13 |X| LTO Ultrium Tape Drive
3580-H23 |X| IBM Total Storage Ultrium 2 Tape Drive Model H23
3580-L11 |X| Linear Tape Open (LTO) Bridge Box (LVD)
3580-L13 |X| LTO Ultrium Tape Drive
3580-L23 |X| IBM Total Storage Ultrium 2 Tape Drive Model L23
3581-H13 |X| LTO Ultrium Tape Autoloader
3581-H17 |X| Linear Tape Open (LTO) Autoloader (HVD)
3581-L13 |X| LTO Ultrium Tape Autoloader
3581-L17 |X| Linear Tape Open (LTO) Autoloader (LVD)
3581-H23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3581-L23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3582-L23 |X| Tape Library
3583-L18 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L36 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L72 |X| Linear Tape Open (LTO) Tape Library - Scalable
3584-D22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D22 Expansion Frame
3584-D32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Base
| | Frame
3584-D52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D52 Expansion Frame
3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1
3584-L22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L22 Base Frame
3584-L32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library -
| | Expansion Frame
3584-L52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L52 Base Frame
3590-B11 |X| IBM Magstar Tape Subsystem Model B11
3590-B1A |X| IBM Magstar Tape Subsystem Model B1A
3590-C12 |X| IBM Magstar Silo Compatible Frame Model C1A
3590-E11 |X| Magstar Tape Subsystem
3590-E1A |X| Magstar Tape Subsystem
3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11
3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A
7206-005 |X| IBM External 4MM Tape Drive Model 005
7206-220 |X| IBM 20GB External 4MM DDS-4 Tape Drive Model 220
7206-VX2 |X| IBM 7206-VX2 External Tape Drive
7207-122 |X| IBM 4GB External SLR5 QIC Tape Drive Model 122
7208-341 |X| IBM 20GB External 8MM Tape Drive Model 341
7208-345 |X| IBM 7208 Model 345 60GB External 8MM Tape Drive
7332-220 |X| IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220
7334-410 |X| IBM 7334 Model 410 8MM Tape Library (MAM2 4x30)
7337-360 |X| IBM 7337 Digital Linear Tape Library Model 360
| |
---------+----------EXPANSION CABINETS---------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2032-C36 |X| McDATA Model 0C3 FC-512 Cabinet for McDATA Directors
| | and Fabric Switch
2042-C40 |X| Inrange 40U Cabinet
2109-C36 |X| IBM TotalStorage San Cabinet C36
7014-S00 |X| 1.6 Meter System Rack - 32U
7014-T00 |X| 1.8 Meter System Rack - 36U
7014-T42 |X| 2.0 Meter System Rack - 42U
| |
---------+----------SERVICES-------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
0463-001 |X| Software Customization (CCS)
0463-002 |X| Center for Customized Solutions (CCS)
The following feature availability matrix for MT 7029 uses the letter
"A" to indicate features that are available and orderable on the
specified models. "S" indicates a feature that is supported on the new
model during a model conversion; these features will work on the new
model, but additional quantities of these features cannot be ordered on
the new model; they can only be removed. "N" indicates that the feature
is not supported on the new model and must be removed during the model
conversion. As additional features are announced, supported, or
withdrawn, this list will be updated. Please check with your Marketing
Representative for additional information.
|6| A = AVAILABLE S = SUPPORTED
|C| N = NOT SUPPORTED, MUST BE REMOVED
|3|
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
0705 |A| Intgr w Data Retention Soln -- IBM TotalStorage Data
| | Retention Solution
0986 |A| CCS Customer Service Specify (US)
1736 |S| Expedited Delivery Service Indicator (US only)
2114 |A| PCI SCSI Adapter 16-Bit Differential External Y Cable
2118 |A| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
2424 |S| 0.6M 16-bit SCSI-2 System to System Cable
2425 |A| 2.5M 16-bit SCSI-2 System to System Cable
2456 |A| LC-SC 50 Micron Fiber Converter Cable
2459 |A| LC-SC 62.5 Micron Fiber Converter Cable
2498 |S| PCI 4-Channel Ultra3 SCSI RAID Adapter
2611 |A| Slimline Diskette Drive (Black bezel)
2623 |S| 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
2640 |A| IDE Slimline DVD-ROM Drive
2709 |S| ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
2710 |S| ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
2732 |S| IBM Short-wave Serial HIPPI PCI Adapter for RS/6000
2849 |A| POWER GXT135P Graphics Accelerator with Digital Support
2861 |A| ARTIC960Hx 4-Port EIA-232 Cable
2863 |A| ARTIC960Hx 4-Port X.21 Cable
2864 |A| ARTIC960Hx 4-Port V.35 (DTE) Cable
2871 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
2872 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
2873 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
| | Cable
2874 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
| | Extension Cable
2877 |A| IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
2934 |A| Asynchronous Terminal/Printer Cable EIA-232
2936 |A| Asynchronous Cable EIA-232/V.24
2943 |A| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944 |S| 128-Port Asynchronous Controller, PCI bus
2946 |S| Turboways 622 Mbps PCI MMF ATM Adapter
2947 |A| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
2951 |S| Cable, V.24 / EIA-232
2952 |S| Cable, V.35
2953 |S| Cable, V.36 / EIA-499
2954 |S| Cable, X.21
2962 |S| 2-Port Multiprotocol PCI Adapter
3124 |A| Serial to Serial Port Cable for Drawer/Drawer
3125 |A| Serial to Serial Port Cable for Rack/Rack
3273 |N| 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
3274 |A| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
3275 |A| 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
3277 |A| 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
3278 |A| 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
3279 |S| 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3578 |A| 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable
3636 |A| L200P Flat Panel Monitor
3637 |A| IBM T541H/L150p 15" TFT Color Monitors, Business Black,
| | Captured Cable
3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable
3639 |S| IBM ThinkVision L170p Flat Panel Monitor
3640 |A| IBM ThinkVision L171p Flat Panel Monitor
3642 |A| ThinkVision L191p Flat Panel Monitor
3752 |A| Service Package
3925 |A| Serial Port Converter Cable, 9-Pin to 25-Pin
3926 |A| Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15
| | pin D-shell)
4256 |A| Extender Cable - USB Keyboards, 2M
4263 |A| SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media
| | Device; Mounting Tray
4266 |A| SCSI Cables (Power and Logic), PCI Riser to SCSI Media
| | Device; Mounting Tray
4267 |A| SCSI Cable, PCI Adapter to Hot-Swap Disks
4270 |A| External SCSI Port Enablement Cable
4353 |S| H-100 Bus 8-position Cable
4445 |A| 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
4446 |A| 1024MB (4x256MB) DIMMs, 208-pin, 8NS DDR SDRAM
4447 |A| 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
4448 |S| 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
4449 |A| 8192MB (4x2048MB) DIMMs, 208-pin, 8NS DDR SDRAM
4651 |A| Rack Indicator, Rack #1
4652 |A| Rack Indicator, Rack #2
4653 |A| Rack Indicator, Rack #3
4654 |A| Rack Indicator, Rack #4
4655 |A| Rack Indicator, Rack #5
4656 |A| Rack Indicator, Rack #6
4657 |A| Rack Indicator, Rack #7
4658 |A| Rack Indicator, Rack #8
4659 |A| Rack Indicator, Rack #9
4691 |S| Rack Status Beacon Cable, Junction Box To Drawer Or
| | Status Beacon
4692 |S| Rack Status Beacon Cable, Junction Box Daisy Chain
4693 |S| Rack Status Beacon Junction Box
4953 |S| IBM 64bit/66MHz PCI ATM 155 UTP Adapter
4957 |S| IBM 64bit/66MHz PCI ATM 155 MMF Adapter
4959 |S| IBM Token-Ring PCI Adapter
4960 |A| IBM e-business Cryptographic Accelerator
4961 |S| IBM Universal 4-Port 10/100 Ethernet Adapter
4962 |S| 10/100 Mbps Ethernet PCI Adapter II
5001 |A| Customer Service Specify
5005 |A| Software Preinstall
5220 |A| 1-way 1.2 GHz POWER4+ Processor Card
5222 |A| 2-way 1.2 GHz POWER4+ Processor Card
5234 |A| 2-way 1.45 GHz POWER4+ Processor Card on Planar
5700 |A| IBM Gigabit Ethernet-SX PCI-X Adapter
5701 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
5703 |A| PCI-X Dual Channel Ultra320 SCSI RAID Adapter
5709 |S| Dual Channel SCSI RAID Enablement Card
5706 |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
5707 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
5712 |S| PCI-X Dual Channel Ultra320 SCSI Adapter
5716 |A| 2 Gigabit Fibre Channel PCI-X Adapter
5718 |A| 10 Gigabit Ethernet-SR PCI-X Adapter
5719 |A| IBM 10 Gigabit Ethernet-LR PCI-X Adapter
5723 |A| 2 Port Asynchronous EIA-232 PCI Adapter
5752 |A| 4.7 GB SCSI DVD-RAM Drive
6120 |A| IBM 80/160 GB Internal Tape Drive with VXA Technology
6134 |N| 60/150 GB 16-bit 8mm Internal Tape Drive
6158 |A| 20/40GB 4mm Internal Tape Drive
6203 |S| PCI Dual Channel Ultra3 SCSI Adapter
6204 |S| PCI Universal Differential Ultra SCSI Adapter
6230 |S| Advanced SerialRAID Plus Adapter
6231 |S| 128 MByte DRAM Option Card
6235 |S| 32 MByte Fast-Write Cache Option Card
6239 |S| 2 Gigabit Fibre Channel PCI-X Adapter
6266 |A| Power Supply, 680 Watt AC, Hot-swap, Base and Redundant
6310 |S| IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
6312 |A| Quad Digital Trunk Telephony PCI Adapter
6574 |A| Ultra3 SCSI 4-Pack
6584 |A| Ultra320 SCSI 4-Pack for Disk Mirroring
7305 |A| AAP Software Pre-Install Indicator
8120 |A| Attachment Cable, Hardware Management Console to Host,
| | 6-Meter
8121 |A| Attachment Cable, Hardware Management Console to Host,
| | 15-Meter
8131 |A| 128-Port Asynchronous Controller Cable, 4.5 Meter
8132 |A| 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
8133 |A| RJ-45 to DB-25 Converter Cable
8136 |S| Rack Mountable Remote Asynchronous Node 16-Port EIA-232
8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232
8148 |A| 1-way 1.2 GHz POWER4+ Processor Card, Express
| | Configurations, Factory Only
8149 |A| 2-way 1.2 GHz POWER4+ Processor Card, Express
| | Configurations, Factory Only
8155 |A| 4096MB (4x1024MB) DIMMs, Express Configurations, Factory
| | Only
8156 |A| 1024MB (4x256MB) DIMMs, Express Configurations, Factory
| | Only
8157 |A| 2048MB (4x512MB) DIMMs, Express Configurations, Factory
| | Only
8158 |S| 4096MB (4x1024MB) DIMMs, Express Configurations, Factory
| | Only
8159 |A| 8192MB (4x2046MB) DIMMs, Express Configurations, Factory
| | Only
8160 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (111C or 111E)
8161 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (121C or 121E)
8162 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (141C or 141E)
8163 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (181C or 181E)
8164 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (221C or 221E)
8165 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (241C or 241E)
8166 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (281C or 281E)
8167 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615 (110C or 110E)
8169 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615 (120C or 120E)
8170 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615 (140C or 140E)
8171 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615 (180C or 180E)
8172 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615 (220R or 220T)
8173 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615 (240C or 240E
8175 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615 (280C or 280E)
8187 |A| 2-way 1.45 GHz POWER4+ Processor Card, Express
| | Configurations, Factory Only
8188 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615(224C or 224E)
8189 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615(244C or 244E)
8190 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615(284C or 284E)
8191 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (225C or 225E)
8192 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (245C or 245E)
8193 |A| Feature Code Indicator for Express Configuration --
| | pSeries 615X (285C or 285E)
8244 |A| Audio PCI Adapter for Workstations
8700 |A| Quiet Touch Keyboard - Business Black, US English, #103P
8701 |A| Quiet Touch Keyboard - Business Black, French, #189
8702 |A| Quiet Touch Keyboard - Business Black, Italian, #142
8703 |A| Quiet Touch Keyboard - Business Black, German/Austrian,
| | #129
8704 |A| Quiet Touch Keyboard - Business Black, UK English, #166
8705 |A| Quiet Touch Keyboard - Business Black, Spanish, #172
8706 |A| Quiet Touch Keyboard - Business Black, Japanese, #194
8707 |A| Quiet Touch Keyboard - Business Black, Brazilian
| | Portuguese, #275
8708 |A| Quiet Touch Keyboard - Business Black, Canadian French,
| | #058
8710 |A| Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
| | #120
8711 |A| Quiet Touch Keyboard - Business Black, Swedish/Finnish,
| | #153
8712 |A| Quiet Touch Keyboard - Business Black, Danish, #159
8713 |A| Quiet Touch Keyboard - Business Black, Bulgarian, #442
8714 |A| Quiet Touch Keyboard - Business Black,
| | Swiss,French/German, #150f/g
8716 |A| Quiet Touch Keyboard - Business Black, Norwegian, #155
8718 |A| Quiet Touch Keyboard - Business Black, Portuguese, #163
8719 |A| Quiet Touch Keyboard - Business Black, Greek, #319
8720 |A| Quiet Touch Keyboard - Business Black, Hebrew, #212
8721 |A| Quiet Touch Keyboard - Business Black, Hungarian, #208
8723 |A| Quiet Touch Keyboard - Business Black, Polish, #214
8725 |A| Quiet Touch Keyboard - Business Black, Slovakian, #245
8726 |A| Quiet Touch Keyboard - Business Black, Czech, #243
8727 |A| Quiet Touch Keyboard - Business Black, Turkish, #179
8729 |A| Quiet Touch Keyboard - Business Black, LA Spanish, #171
8730 |A| Quiet Touch Keyboard - Business Black, Arabic, #238
8733 |A| Quiet Touch Keyboard - Business Black, Korean, #413
8734 |A| Quiet Touch Keyboard - Business Black, Chinese/US, #467
8735 |A| Quiet Touch Keyboard - Business Black, French Canadian,
| | #445
8736 |A| Quiet Touch Keyboard - Business Black, Thailand, #191
8738 |A| Quiet Touch Keyboard - Business Black, Russian, #443
8739 |A| Quiet Touch Keyboard - Business Black, Croatian, #105
8740 |A| Quiet Touch Keyboard - Business Black, US English ISO9995,
| | #103P
8741 |A| 3-Button Mouse - Business Black
9004 |A| Southern Hemisphere Designator for Monitors
9300 |A| Language Group Specify - US English
9703 |A| Language Group Specify - French
9704 |A| Language Group Specify - German
9705 |A| Language Group Specify - Polish
9707 |A| Language Group Specify - Portuguese
9708 |A| Language Group Specify - Spanish
9711 |A| Language Group Specify - Italian
9712 |A| Language Group Specify - Canadian French
9714 |A| Language Group Specify - Japanese
9715 |A| Language Group Specify - Traditional Chinese (Taiwan)
9716 |A| Language Group Specify - Korean
9718 |A| Language Group Specify - Turkish
9719 |A| Language Group Specify - Hungarian
9720 |A| Language Group Specify - Slovakian
9721 |A| Language Group Specify - Russian
9722 |A| Language Group Specify - Simplified Chinese (PRC)
9724 |A| Language Group Specify - Czech
9800 |A| Power Cord Specify - United States/Canada
9802 |A| Power Cord Specify - Brazil (125V, 15A)
9820 |A| Power Cord Specify - Belgium, Finland, France, Indonesia,
| | Korea (250V, 16A)
9821 |A| Power Cord Specify - Denmark (250V, 10A)
9825 |A| Power Cord Specify - United Kingdom (250V, 13A)
9827 |A| Power Cord Specify - Israel (250V, 6-16A)
9828 |A| Power Cord Specify - Switzerland (250V, 10A)
9829 |A| Power Cord Specify - South Africa/Pakistan (250V, 16A)
9830 |A| Power Cord Specify - Italy/Chile (250V, 10A and 16A)
9831 |A| Power Cord Specify - Australia/New Zealand/Argentina
| | (250V, 10A)
9833 |A| Power Cord Specify - Thailand (250V, 15A)
9834 |A| Power Cord Specify - Uruguay (250V, 10A)
9900 |A| Power Cord (4M) Specify -- United States/Canada
9901 |A| Power Cord (4M) Specify -- Belgium Finland, France
| | (250V, 16A)
9902 |A| Power Cord (4M) Specify -- Denmark (250V, 10A)
9903 |A| Power Cord (4M) Specify -- U.K. and Others (250V, 13A)
9904 |A| Power Cord (4M) Specify -- Israel (250V, 6-16A)
9905 |A| Power Cord (4M) Specify -- Switzerland (250V, 10A)
9906 |A| Power Cord (4M) Specify -- India, Pakistan, S. Africa
| | (250V, 16A)
9907 |A| Power Cord (4M) Specify -- Italy (250V, 10A and 16A)
9908 |A| Power Cord (4M) Specify -- Australia/New
| | Zealand/Argentina (250V, 10A)
9909 |A| Power Cord (4M) Specify -- Thailand (250V, 15A)
9911 |A| Power Cord (4M) Specify -- All (Standard rack power cord)
Model Conversions
None.
Back to top
Technical Description
|
- Rack - Mount:
- Width: 437 mm (17.2 in)
- Depth: 508 mm (20.0 in)
- Height: 178 mm (07.0 in)
- Weight: 35.5 kg (78.0 lb) - Minimum Configuration
- Weight: 43.1 kg (94.8 lb) - Maximum Configuration
- Temperature: (Power Off) 10 to 43 degrees C (50 to 109 F)
- Relative humidity: 8 % to 80 %
- Maximum wet bulb: (Power Off) 27 degrees C (80 F)
- Operating voltage: 100 to 127 or 200 to 240 V ac (auto-ranging)
- Operating frequency: 47/63 Hz
- Power requirements: 300 watts (typical); 450 watts (maximum)
- Thermal output: 1024 Btu/hour (typical); 1536 Btu/hour (maximum)
- Power source loading:
- 0.30 kVA (typical configuration)
- 0.50 kVA (maximum configuration)
- Maximum altitude: 2,135 m (7,000 ft)
Noise Level and Sound Power
- Sound Power: Model 6C3 6.0 Bels Idle/6.0 Bels Operating
EMC Conformance Classification
This equipment is subject to FCC rules and shall comply with the
appropriate FCC rules before final delivery to the buyer or centers of
distribution.
- U.S.A.: FCC Class B for Deskside/Desktop; FCC Class A for Rack Mount
- Europe: CISPR 22 Class B for Deskside/Desktop; CISPR 22 Class A for
Rack Mount
- Japan: VCCI-B for Deskside/Desktop; VCCI-A for Rack Mount
- Korea: Korean Requirement Class B for Deskside/Desktop; Class A Rack
Mount
- China: People's Republic of China commodity inspection law
Homologation -- Telecom Environmental Testing (Safety and
EMC)
Homologation approval for specific countries has been initiated with
the IBM Homologation and Type Approval (HT&A) organization in LaGaude.
This IBM eServer pSeries model and applicable features meet the
environmental testing requirements of the country TELECOM and have been
designed and tested in compliance with the Full Quality Assurance
Approval (FQAA) process as delivered by the British Approval Board for
Telecom (BABT), the U.K. Telecom Regulatory authority.
Product Safety/Country Testing/Certification
- UL 1950 Underwriters Laboratory, Safety Information
- CSA C22.2 No. 950-M86
- EN60950 European Norm
- IEC 950, Edition 1, International Electrotechnial Commission, Safety
Information
- Nordic deviations to IEC-950 1st Edition, as outlined in document
EMKO-TSE(05-SEC) 200/93
General Requirements
The product is in compliance with IBM Corporate Bulletin C-B
0-2594-000 Statement of Conformity of IBM Product to External Standard
(Suppliers Declaration).
System
- External SCSI Port Enablement Cable (#4270):
- When this feature is installed in the system a second four-pack disk
enclosure (second #6574 or first #6584) cannot be installed
- Requires one PCI-X slot
- The maximum external cable length supported by #4270 is 6 meters
Processor cards
- Only one processor card may be installed in the system.
Power Supply
- Base machine contains one ac power supply with a second available for
redundancy
Redundant Power Supply/Fans
- Second optional AC (#6266) power supply
- Redundant fans standard
System Memory
- A maximum of 16 GB of system memory.
- A minimum of 1 GB of memory is required.
- Memory DIMMs must be ordered and installed in quads on the memory
controller. They must be installed starting at the bottom of the card.
- First quad:
- Second quad:
Figure 1. Memory Features
Feature Minimum Maximum
Feature Number Quantity Quantity
-------------------- ------- -------- --------
1024 MB 4446 0 2
(4 x 256 MB DIMMs)
2048 MB 4447 0 2
(4 x 512 MB DIMMs)
4096 MB 4448 0 2
(4 x 1024 MB DIMMs)
4096 MB 4445 0 2
(4 x 1024 MB DIMMs)
8192 MB 4449 0 2
(4 x 2048 MB DIMMs)
Power Cord Specify
Power code specify feature numbers 98xx provide a power cord to power
an external I/O device from a wall-type outlet. These do not work with
the rack Power Distribution Unit (PDU). To plug the I/O device into a
7014-T00 or T42 rack PDU, order #6095.
Power cord specify feature 9911 is the standard IBM rack power cord
which goes from the Model 6C3 to the PDU. Customers will receive #9911
if they do not specify a power cord. Power cord specify feature numbers
9900-9909 are available to customers who want to plug the Model 6C3 into
a regular wall-type outlet.
PCI Card Slots
There are six hot-plug PCI-X slots in Models 6E3 and 6C3:
- Slots 4, 5 and 6 are long, 64-bit, 3.3 V, and run at 133 MHz.
- Slots 2 and 3 are short 32-bit, 3.3 V, and run at 66 MHz.
- Slot 1 is long, 64-bit, and runs at 133 MHz. No long cards allowed
in this slot.
Graphics Adapters
- Graphics adapter, keyboard, and mouse are not required in the minimum
configuration.
- The maximum number of graphics adapters supported in Models 6E3 and
6C3 is four.
I/O Adapters
- The PCI Advanced SerialRAID Plus adapter (#6230) can be selected with
or without the Fast-Write Cache Option card (#6235).
- The SSA Fast-Write Cache Option card (#6235) is a cache upgrade for
the SSA Advanced SerialRAID Plus adapter (#6230) and can only be selected
along with that adapter (maximum of one per #6230).
- Refer to Figure 2 for additional I/O adapter limitations.
- 64-bit adapters are not allowed in 32-bit slots.
Figure 2. I/O Adapter Features
AIX/LINUX
Feature Max Slot or
I/O Adapter Number Qty Priority Size both
========================= ======= === ============= ====== ========
Gigabit Ethernet 5700 4 1,4,5,6 Short Both
Gigabit Ethernet-VTP 5701 4 1,4,5,6 Short Both
2-port 10/100/1000
Ethernet 5706 4 1,4,5,6 Short AIX
2-port Gigabit
Ethernet - SX 5707 4 1,4,5,6 Short AIX
2-Port Multiprotocol 2962 6 1,4,2,3,5,6 Short AIX
Ultra3 SCSI RAID 2498 3 4,5,6 Long AIX
SSA RAID 5 6230 3 4,5,6 Long AIX
Cryptographic Coprocessor 4960 4 1,4,2,3,5,6 Short AIX
DIMM for #6230 6231 3 N/A N/A AIX
Cache for #6230 6235 3 N/A N/A AIX
4-Port 10/100 Ethernet 4961 3 4,5,6 Long Both
8-Port Async 2943 6 1,4,2,3,5,6 Short AIX
128-Port Async 2944 6 1,4,2,3,5,6 Short AIX
4/16 Token Ring 4959 6 1,4,2,3,5,6 Short AIX
Ultra SCSI Differential 6204 6 1,4,2,3,5,6 Short Both
155 UTP ATM 4953 4 1,4,5,6 Short AIX
155 MMF ATM 4957 4 1,4,5,6 Short AIX
622 MMF ATM 2946 4 1,4,5,6 Short AIX
Ultra3 SCSI 6203 3 4,5,6 Long Both
Fibre Channel 6239 4 1,4,5,6 Short AIX
Artic960 Hx 4-ports 2947 3 4,5,6 Long AIX
HIPPI Short-wave 2732 2 4,5,6 Long AIX
10/100 Ethernet 4962 6 1,4,2,3,5,6 Short Both
Artic960 RxD 6310 3 4,5,6 Long AIX
GXT135P Graphics
Accelerator 2849 4 1,4,2,3,5,6 Short Both
Audio PCI Adapter 8244 1 2,3 Short AIX
PCI-X Dual Channel
Ultra320 SCSI Adapter 5712 3 4, 5, 6 Long AIX
Dual Channel SCSI RAID
Enablement Card 5709 1 N/A N/A AIX
PCI-X Dual Channel
Ultra320 SCSI RAID 5703 3 4, 5, 6 Long AIX
Storage Devices/Bays
- There are two DASD 4-packs in the system, one mandatory (#6574) and
one optional (#6574 or #6584).
- Media bays can contain an optional DVD-ROM in bay 3, an optional
diskette in bay 2, and an optional DVD-RAM or tape drive in bay 4.
- DVD-RAM (#2623) requires SCSI adapter (#6203 or follow-on) and cable
(#4266).
- If optional tape drive #6158, #6120 or #6134 is installed, cable
#4263 is required. Cable #4263 requires #6158, #6120 or #6134 to be
installed.
- Boot DASD is placed in DASD #5. If the system has a 3-4 pack
installed, DASD is filled #6, #7, #8. If two 4-packs are installed DASD
is filled #1, #6, #2, #7, #3, #8, #4.
Note: Because the 7029-6E3 and 6C3 systems have an optional diskette
drive (#2611), DVD-ROM (#2640), and DVD-RAM (#2623), alternate methods
for maintaining and servicing the system need to be available for use if
the diskette drive, DVD-ROM, and DVD-RAM are not ordered; an external
internet connection must be available to maintain or update system
microcode to the latest required level.
Figure 3. Storage Device Features
Maximum Feature
Device Quantity Bay Number
============= ======== ========= =======
DVD-ROM (IDE) 1 Media 2/3 2640
Diskette 1 Media 2 2611
DVD-RAM (SCSI) 1 Media 4 2623
4-mm 20/40 GB Tape 1 Media 4 6158
8-mm 60/120 GB Tape (LVD) 1 Media 4 6134
8-mm 80/160 GB Tape (LVD) 1 Media 4 6120
36.4 GB 10 K rpm 8 DASD 1-8 3273
Ultra3 SCSI Disk,
Hot-swap
36.4 GB 15 K rpm Ultra3 SCSI 8 DASD 1-8 3277
Disk, Hot-swap
73.4 GB 10 K rpm 8 DASD 1-8 3274
Ultra3 SCSI Disk,
Hot-swap
73.4 GB 15 K rpm 8 DASD 1-8 3278
Ultra3 SCSI Disk, Hot-swap
146.8 GB 10 K rpm, 8 DASD 1-8 3275
Ultra3 SCSI Disk, Hot-swap
Ultra320 SCSI 4-pack 2 System Planar 6574
Ultra320 SCSI 4-pack
for disk mirroring 1 System Planar 6584
Linux Operating System
- Supported UnitedLinux 1.0 (UL 1.0) distributions are:
- SuSE Linux Enterprise Server 8 for iSeries and pSeries (SLES 8)
- Turbolinux Enterprise Server 8 for IBM pSeries (TLES 8)
- Conectiva Linux Enterprise Edition 8 for IBM pSeries (CLEE 8)
- Supported Red Hat Linux distributions are:
- Red Hat Enterprise Linux AS for pSeries (RHEL 3)
For customers installing supported Linux distributions, only the
following I/O adapters and storage devices available on the pSeries 615
Models 6C3 and 6E3 are supported and tested:
Figure 4. Linux I/O Adapter Features
UL 1.0 RHEL 3
Feature Maximum Maximum
I/O Adapter Number Quantity Quantity
============================ ======= ======== ========
GXT135P 2849 4 4
Ultra SCSI Differential 6204 6 NS
4-Port 10/100 Ethernet 4961 3 3
10/100 Ethernet Adapter II 4962 6 6
Gigabit Ethernet - PCI-X 5700 4 4
Gigabit Ethernet UTP PCI-X 5701 4 4
Gigabit Ethernet UTP (2-port) 5706 4 4
Gigabit Ethernet SX (2-port) 5707 4 4
Ultra3 SCSI 6203 3 3
2 Gigabit Fibre Channel PCI-X 6239 4 NS
Ultra320 SCSI RAID 5703 3 3
SCSI RAID Enablement Card 5709 1 1
Ultra320 SCSI 5712 3 3
Note: For versions of the GXT135P (Feature Numbers 2848 and 2849) with a
digital port as VGA1, please see:
- http://www.ibm.com/servers/eserver/pseries/linux/sles8
releasenotes.pdf
For information on configuring this card for use with Linux. There is
limited native X-Windows and graphics support on these adapters. Remote
X-Windows capabilities are fully enabled.
Figure 5. Linux Storage Device Features
UL 1.0 RHEL 3
Feature Maximum Maximum
Device Number Quantity Quantity
============================= ======= ======== ========
7311-D20 Expansion Drawer NS NS
2104-DU3/TU3 External Storage X X
2104-DS4/TS4 External Storage X X
2105-100/800 Enterprise Storage Server X NS
FASTIT200/600/700/900 Storage Servers X NS
36.4 GB 10k Disk Drive 3273 8 8
73.4 GB 10k Disk Drive 3274 8 8
146.8 GB 10k Disk Drive 3275 8 8
36.4 GB 15k Disk Drive 3277 8 8
73.4 GB 15k Disk Drive 3278 8 8
4mm 20/40 GB Tape 6158 1 1
8mm 60/150 GB Tape 6134 1 1
8mm 80/160 GB Tape 6120 1 1
DVD-ROM (Slimline) 2640 1 1
Diskette Drive (Slimline) 2611 1 1
4.7 GB SCSI DVD-RAM 2623 1 NS
3494 Enterprise Automated Tape Library X NS
3580 Ultrium LTO Tape Drive X NS
3582 Ultrium Tape Drive X NS
3584 Ultrium UltraScalable Tape Library X NS
3590 H11/H1A/E11/E1A Enterprise Tape DriveX NS
3592 Enterprise Tape Drives X NS
Note: NS = Not Supported.
Note: DVD-RAM (#2623) is supported for CD-ROM use only. No support is
provided for reading/writing DVDs.
Note: The 2104 Expandable Storage Plus Models DU3/TU3 are only supported
when attached via the 6203 Ultra3 SCSI adapter.
Note: Enterprise and Ultrium tape drives are only supported via Fibre
Channel attachment.
Linux does not support hot-swap DASD, hot-swap PCI slots, or hot-swap
media bays. Models 6C3 and 6E3 DASD and memory supported on AIX V5.1 or
AIX V5.2 are supported under Linux.
Additional information about Linux running on pSeries systems, can be
found at:
- http://www-1.ibm.com/servers/eserver/pseries/linux
Figure 6. Fibre Channel Directors, Switches, and Hubs
UL 1.0 RHEL 3
Support Support
======= ======
2031-032/244/232 McDATA Fibre Channel Switch Yes No
2032-064/140 McDATA Fibre Channel Director Yes No
2042-128/256 INRANGE FC/9000 Fibre Director Yes No
2062-D01/D02/T07 Cisco Fabric Switch/Director Yes No
3534-F08 SAN Switch Yes No
2109-F16/F32 SAN Switch Yes No
Note: IBM eServer pSeries 615 Express configurations are Linux ready.
Model 6E3 and Model 6C3 Minimum System Configuration
The Model 6E3 deskside and Model 6C3 rack-mounted servers can be
configured to incorporate two processors, 16 GB of system memory, 6 PCI
adapters, and multiple media devices, as desired. This flexibility is
made available through the many optional features for Models 6E3 and 6C3.
Each Model 6E3 and Model 6C3 must include a minimum of the
following items:
- One system Central Electronics Complex (CEC) enclosure with the
following items:
- One Power Cord Supply, Specify (#98XX or #99XX)
- One Language Group, Specify (#9XXX)
- One Processor Card -- chosen from:
- POWER4+ Processor -- 1-way 1.2 GHz, 8MB L3 Cache (#5220)
- POWER4+ Processor -- 2-way 1.2 GHz, 8MB L3 Cache (#5222)
- POWER4+ Processor -- 2-way 1.45 GHz, 8MB L3 Cache (#5234)
- Choose 1 GB minimum memory:
- 1024 MB memory (4 x 256 MB DIMMs) (#4446)
- 2048 MB memory (4 x 512 MB DIMMs) (#4447)
- 4096 MB memory (4 x 1024 MB DIMMs) (#4448)
- 4096 MB memory (4 x 1024 MB DIMMs) (#4445)
- 8192 MB memory (4 x 2048 MB DIMMs) (#4449)
- Choose disk drive from:
- 36.4 GB Ultra3 10K rpm (#3273)
- 36.4 GB Ultra3 15K rpm (#3277)
- 73.4 GB Ultra3 10K rpm (#3274)
- 73.4 GB Ultra3 15K rpm (#3278)
- 146.8 GB Ultra3 10K rpm (#3275)
- One 4-pack Disk Drive enclosure (#6574)
- One AC Power Supply (#6266)
pSeries 615 Model 6C3 HA Solution Configuration
The Model 6C3 HA solution package must include a minimum of the
following hardware and software that must be ordered together as
specified:
Two Model 6C3 servers each incorporating:
RAID
Internal RAID is available on the pSeries 615 Models 6C3 and 6E3. A
number of options are available to customers wanting to install RAID on
their systems:
- Install Feature Number 5709, the Dual Channel SCSI RAID Enablement
Card. Install 4 disk drives in Feature Number 6574, the Ultra320 SCSI
4-pack enclosure. This will allow RAID capabilites within a single
4-pack of DASD.
- Install Feature Number 5709. Install a second Feature Number 6574.
This will allow RAID capabilities across two 4-packs of DASD.
- Install Feature Number 5709. Install Feature Number 6584, the
Ultra320 SCSI 4-Pack Enclosure for Disk Mirroring. Install Feature
Number 5703, the PCI-X Dual Channel Ultra320 SCSI RAID Adapter. Install
Feature Number 4267, the SCSI Cable which connects the PCI Adapter to
Feature Number 6584. This RAID configuration will provide increased
reliability over options 1 and 2.
If installing AIX on the system:
- AIX Version 5L for Power V5.1 with the 5100-04 Recommended
Maintenance Package (APAR IY39794), or later
or
- AIX 5L for Power V5.2 with the 5200-01 Recommended Maintenance
Package (APAR IY39795), or later
If installing Linux on the system:
Back to top
Publications
|
The following publications will be shipped with the 7029-6C3/6E3.
Additional copies are available. To order, contact your IBM
representative.
Title Order Number
------------------------------------------- ------------
IBM eServer pSeries 615 Model 6E3
and Model 6C3 Installation Guide SA38-0628
Installation System Unit Safety Information SA23-2652
PCI Adapter Placement Reference SA38-0538
Warranty Information SA38-0586
Customer Support Information SA38-0584
The following publications are available for a fee:
Title Order Number
---------------------------------------- --------------------
IBM eServer pSeries 615 Model 6E3
and Model 6C3 Installation Guide SA38-0628
IBM eServer pSeries 615 Model 6E3
and Model 6C3 User's Guide SA38-0629
IBM eServer pSeries 615 Model 6E3
and Model 6C3 Service Guide SA38-0630 (US only)
HMC Operations Guide SA38-0590
HMC Maintenance Guide SA38-0603
Adapters, Devices, and Cable Information SA38-0516
PCI Adapter Placement Reference SA38-0538
Site Hardware Planning Information SA38-0508
Hardware books such as installation guides, user's guides, and service
guides are available to download or view at:
http://www.ibm.com/servers/eserver/pseries/library/
hardware_docs
AIX documentation can be found at:
http://www.ibm.com/servers/aix/library/techpubs.html
The Publication Notification System (PNS) is available by order
number/ product number. Customers currently subscribing to PNS will
automatically receive notifications by e-mail. Customers who want to
subscribe, can visit the PNS Web site location at:
http://www.ibm.com/shop/publications/pns/
The publications listed on the notification can be ordered by calling
the Publication Support Group in Raleigh at 800-879-2755, option 1. The
IBM Publications Center Portal:
http://www.ibm.com/shop/publications/order
The Publications Center is a worldwide central repository for IBM
product publications and marketing material with a catalog of 70,000
items. Extensive search facilities are provided, as well as payment
options via credit card. Furthermore, a large number of publications are
available online in various file formats, which can currently be
downloaded free of charge.
Note: PNS subscribers most often order their publications via the
Publication Center.
Back to top
Features -- Specify/Special/Exchange
|
Specify Features for Machine Type 7029
- LANGUAGES
- (#9300) - Language Group Specify - US English
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9718) - Language Group Specify - Turkish
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- (#9724) - Language Group Specify - Czech
- POWER
- (#6266) - Power Supply, 680 Watt AC, Hot-swap, Base and Redundant
- LINECORDS
- (#9800) - Power Cord Specify - United States/Canada
- (#9802) - Power Cord Specify - Brazil (125V, 15A)
- (#9820) - Power Cord Specify - Belgium, Finland, France, Indonesia,
Korea (250V, 16A)
- (#9821) - Power Cord Specify - Denmark (250V, 10A)
- (#9825) - Power Cord Specify - United Kingdom (250V, 13A)
- (#9827) - Power Cord Specify - Israel (250V, 6-16A)
- (#9828) - Power Cord Specify - Switzerland (250V, 10A)
- (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
- (#9830) - Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- (#9831) - Power Cord Specify - Australia/New Zealand/Argentina (250V,
10A)
- (#9833) - Power Cord Specify - Thailand (250V, 15A)
- (#9834) - Power Cord Specify - Uruguay (250V, 10A)
- MISCELLANEOUS
- (#0705) - Intgr w Data Retention Soln -- IBM TotalStorage Data
Retention Solution
- (#0986) - CCS Customer Service Specify (US)
- (#1736) - Expedited Delivery Service Indicator (US only)
- (#5001) - Customer Service Specify
- (#5005) - Software Preinstall
- (#7305) - AAP Software Pre-Install Indicator
- (#8160) - Feature Code Indicator for Express Configuration -- pSeries
615X (111C or 111E)
- (#8161) - Feature Code Indicator for Express Configuration -- pSeries
615X (121C or 121E)
- (#8162) - Feature Code Indicator for Express Configuration -- pSeries
615X (141C or 141E)
- (#8163) - Feature Code Indicator for Express Configuration -- pSeries
615X (181C or 181E)
- (#8164) - Feature Code Indicator for Express Configuration -- pSeries
615X (221C or 221E)
- (#8165) - Feature Code Indicator for Express Configuration -- pSeries
615X (241C or 241E)
- (#8166) - Feature Code Indicator for Express Configuration -- pSeries
615X (281C or 281E)
- (#8167) - Feature Code Indicator for Express Configuration -- pSeries
615 (110C or 110E)
- (#8169) - Feature Code Indicator for Express Configuration -- pSeries
615 (120C or 120E)
- (#8170) - Feature Code Indicator for Express Configuration -- pSeries
615 (140C or 140E)
- (#8171) - Feature Code Indicator for Express Configuration -- pSeries
615 (180C or 180E)
- (#8172) - Feature Code Indicator for Express Configuration -- pSeries
615 (220C or 220E)
- (#8173) - Feature Code Indicator for Express Configuration -- pSeries
615 (240C or 240E)
- (#8175) - Feature Code Indicator for Express Configuration -- pSeries
615 (280C or 280E)
- RACK RELATED
- (#9900) - Power Cord (4M) Specify -- United States/Canada
- (#9901) - Power Cord (4M) Specify -- Belgium Finland, France (250V,
16A)
- (#9902) - Power Cord (4M) Specify -- Denmark (250V, 10A)
- (#9903) - Power Cord (4M) Specify -- U.K. and Others (250V, 13A)
- (#9904) - Power Cord (4M) Specify -- Israel (250V, 6-16A)
- (#9905) - Power Cord (4M) Specify -- Switzerland (250V, 10A)
- (#9906) - Power Cord (4M) Specify -- India, Pakistan, S. Africa
(250V, 16A)
- (#9907) - Power Cord (4M) Specify -- Italy (250V, 10A and 16A)
- (#9908) - Power Cord (4M) Specify -- Australia/New Zealand/Argentina
(250V, 10A)
- (#9909) - Power Cord (4M) Specify -- Thailand (250V, 15A)
- (#9911) - Power Cord (4M) Specify -- All (Standard rack power cord)
- SPECIFY CODES
- (#9004) - Southern Hemisphere Designator for Monitors
- (#4651) - Rack Indicator, Rack #1
- (#4652) - Rack Indicator, Rack #2
- (#4653) - Rack Indicator, Rack #3
- (#4654) - Rack Indicator, Rack #4
- (#4655) - Rack Indicator, Rack #5
- (#4656) - Rack Indicator, Rack #6
- (#4657) - Rack Indicator, Rack #7
- (#4658) - Rack Indicator, Rack #8
- (#4659) - Rack Indicator, Rack #9
Special Features - Initial Orders
- MEMORY
- (#8155) - 4096MB (4x1024MB) DIMMs, Express Configurations, Factory
Only
- (#8156) - 1024MB (4x256MB) DIMMs, Express Configurations, Factory
Only
- (#8157) - 2048MB (4x512MB) DIMMs, Express Configurations, Factory
Only
- (#8158) - 4096MB (4x1024MB) DIMMs, Express Configurations, Factory
Only
- (#8159) - 8192MB (4x2046MB) DIMMs, Express Configurations, Factory
Only
- PROCESSORS
- (#5220) - 1-way 1.2 GHz POWER4+ Processor Card
- (#5222) - 2-way 1.2 GHz POWER4+ Processor Card
- (#5234) - 2-way 1.45 GHz POWER4+ Processor Card on Planar
- (#8148) - 1-way 1.2 GHz POWER4+ Processor Card, Express
Configurations, Factory Only
- (#8149) - 2-way 1.2 GHz POWER4+ Processor Card, Express
Configurations, Factory Only
- (#8187) - 2-way 1.45 GHz POWER4+ Processor Card, Express
Configurations, Factory Only
- MISCELLANEOUS
- (#8188) - Feature Code Indicator for Express Configuration -- pSeries
615 (224C or 224E)
- (#8189) - Feature Code Indicator for Express Configuration -- pSeries
615 (244C or 244E)
- (#8190) - Feature Code Indicator for Express Configuration -- pSeries
615 (284C or 284E)
- (#8191) - Feature Code Indicator for Express Configuration -- pSeries
615X (225C or 225E)
- (#8192) - Feature Code Indicator for Express Configuration -- pSeries
615X (245C or 245E)
- (#8193) - Feature Code Indicator for Express Configuration -- pSeries
615X (285C or 285E)
Special Features - Plant and/or Field Installable
- ADAPTERS
- (#2498) - PCI 4-Channel Ultra3 SCSI RAID Adapter
- (#2732) - IBM Short-wave Serial HIPPI PCI Adapter for RS/6000
- (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
- (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#2946) - Turboways 622 Mbps PCI MMF ATM Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
- (#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
- (#4959) - IBM Token-Ring PCI Adapter
- (#4960) - IBM e-business Cryptographic Accelerator
- (#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter
- (#5709) - Dual Channel SCSI RAID Enablement Card
- (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
- (#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter
- (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#5718) - 10 Gigabit Ethernet-SR PCI-X Adapter
- (#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
- (#5723) - 2 Port Asynchronous EIA-232 PCI Adapter
- (#6203) - PCI Dual Channel Ultra3 SCSI Adapter
- (#6204) - PCI Universal Differential Ultra SCSI Adapter
- (#6230) - Advanced SerialRAID Plus Adapter
- (#6231) - 128 MByte DRAM Option Card
- (#6235) - 32 MByte Fast-Write Cache Option Card
- (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#6310) - IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
- (#6312) - Quad Digital Trunk Telephony PCI Adapter
- CABLES
- (#2934) - Asynchronous Terminal/Printer Cable EIA-232
- (#2936) - Asynchronous Cable EIA-232/V.24
- (#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin
- (#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
- (#4267) - SCSI Cable, PCI Adapter to Hot-Swap Disks
- (#4270) - External SCSI Port Enablement Cable
- (#8120) - Attachment Cable, Hardware Management Console to Host,
6-Meter
- (#8121) - Attachment Cable, Hardware Management Console to Host,
15-Meter
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- (#4263) - SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media
Device; Mounting Tray
- (#4266) - SCSI Cables (Power and Logic), PCI Riser to SCSI Media
Device; Mounting Tray
- (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
- (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
- (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
- (#2425) - 2.5M 16-bit SCSI-2 System to System Cable
- (#2456) - LC-SC 50 Micron Fiber Converter Cable
- (#2459) - LC-SC 62.5 Micron Fiber Converter Cable
- (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15
pin D-shell)
- (#4256) - Extender Cable - USB Keyboards, 2M
- (#2709) - ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
- (#2710) - ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
- (#2861) - ARTIC960Hx 4-Port EIA-232 Cable
- (#2863) - ARTIC960Hx 4-Port X.21 Cable
- (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
- (#2871) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
- (#2872) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
- (#2873) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
Cable
- (#2874) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
Extension Cable
- (#2951) - Cable, V.24 / EIA-232
- (#2952) - Cable, V.35
- (#2953) - Cable, V.36 / EIA-499
- (#2954) - Cable, X.21
- (#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
- (#3124) - Serial to Serial Port Cable for Drawer/Drawer
- (#3125) - Serial to Serial Port Cable for Rack/Rack
- (#4353) - H-100 Bus 8-position Cable
- (#4691) - Rack Status Beacon Cable, Junction Box To Drawer Or Status
Beacon
- (#4692) - Rack Status Beacon Cable, Junction Box Daisy Chain
- DISKS
- (#3273) - 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3274) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3275) - 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3277) - 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3278) - 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3279) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- MISCELLANEOUS
- (#6584) - Ultra320 SCSI 4-Pack for Disk Mirroring
- (#3752) - Service Package
- DISPLAYS
- (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black,
Captured Cable
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - IBM ThinkVision L171p Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- KEYBOARDS
- (#8700) - Quiet Touch Keyboard - Business Black, US English, #103P
- (#8701) - Quiet Touch Keyboard - Business Black, French, #189
- (#8702) - Quiet Touch Keyboard - Business Black, Italian, #142
- (#8703) - Quiet Touch Keyboard - Business Black, German/Austrian,
#129
- (#8704) - Quiet Touch Keyboard - Business Black, UK English, #166
- (#8705) - Quiet Touch Keyboard - Business Black, Spanish, #172
- (#8706) - Quiet Touch Keyboard - Business Black, Japanese, #194
- (#8707) - Quiet Touch Keyboard - Business Black, Brazilian
Portuguese, #275
- (#8708) - Quiet Touch Keyboard - Business Black, Canadian French,
#058
- (#8710) - Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
#120
- (#8711) - Quiet Touch Keyboard - Business Black, Swedish/Finnish,
#153
- (#8712) - Quiet Touch Keyboard - Business Black, Danish, #159
- (#8713) - Quiet Touch Keyboard - Business Black, Bulgarian, #442
- (#8714) - Quiet Touch Keyboard - Business Black, Swiss,French/German,
#150f/g
- (#8716) - Quiet Touch Keyboard - Business Black, Norwegian, #155
- (#8718) - Quiet Touch Keyboard - Business Black, Portuguese, #163
- (#8719) - Quiet Touch Keyboard - Business Black, Greek, #319
- (#8720) - Quiet Touch Keyboard - Business Black, Hebrew, #212
- (#8721) - Quiet Touch Keyboard - Business Black, Hungarian, #208
- (#8723) - Quiet Touch Keyboard - Business Black, Polish, #214
- (#8725) - Quiet Touch Keyboard - Business Black, Slovakian, #245
- (#8726) - Quiet Touch Keyboard - Business Black, Czech, #243
- (#8727) - Quiet Touch Keyboard - Business Black, Turkish, #179
- (#8729) - Quiet Touch Keyboard - Business Black, LA Spanish, #171
- (#8730) - Quiet Touch Keyboard - Business Black, Arabic, #238
- (#8733) - Quiet Touch Keyboard - Business Black, Korean, #413
- (#8734) - Quiet Touch Keyboard - Business Black, Chinese/US, #467
- (#8735) - Quiet Touch Keyboard - Business Black, French Canadian,
#445
- (#8736) - Quiet Touch Keyboard - Business Black, Thailand, #191
- (#8738) - Quiet Touch Keyboard - Business Black, Russian, #443
- (#8739) - Quiet Touch Keyboard - Business Black, Croatian, #105
- (#8740) - Quiet Touch Keyboard - Business Black, US English ISO9995,
#103P
- MEMORY
- (#4445) - 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
- (#4446) - 1024MB (4x256MB) DIMMs, 208-pin, 8NS DDR SDRAM
- (#4447) - 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
- (#4448) - 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
- (#4449) - 8192MB (4x2048MB) DIMMs, 208-pin, 8NS DDR SDRAM
- MEDIA DEVICES
- (#2611) - Slimline Diskette Drive (Black bezel)
- (#2623) - 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
- (#5752) - 4.7 GB SCSI DVD-RAM Drive
- (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology
- (#6134) - 60/150 GB 16-bit 8mm Internal Tape Drive
- (#6158) - 20/40GB 4mm Internal Tape Drive
- (#2640) - IDE Slimline DVD-ROM Drive
- MISCELLANEOUS
- (#6574) - Ultra3 SCSI 4-Pack
- (#8244) - Audio PCI Adapter for Workstations
- (#8741) - 3-Button Mouse - Business Black
- RACK RELATED
- (#4693) - Rack Status Beacon Junction Box
Feature Descriptions
The following is a list of all feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.
The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.
(#0705) Intgr w Data Retention Soln -- IBM TotalStorage Data Retention Solution
This feature specifies that this machine type/model will be integrated
ino the IBM TotalStorage Data Retention Solution, DR400. Orders with
this feature will be routed to IBM Rochester manufacturing for
fulfillment and integration.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3 (#0705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum:1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does Not Apply
- Return Parts MES: Does not apply
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#0986)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#1736) Expedited Delivery Service Indicator (US only)
(No Longer Available as of June 25, 2004)
This feature number specifies that a system will be shipped to the
customer with expedited 2 day delivery.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#1736)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2
differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7029-6C3: (#2114)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI
connector to a 68-pin P style connector. Cable has male Mini-68 pin
VHDCI connector on one end and a female 68 pin P style connector on the
other. Length = 0.3 meters.
- Attributes provided: Attachment of supported external sub-system to
integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
- Attributes required: None
- For 7029-6C3: (#2118)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2424) 0.6M 16-bit SCSI-2 System to System Cable
(No Longer Available as of December 10, 2004)
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7029-6C3: (#2424)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2425) 2.5M 16-bit SCSI-2 System to System Cable
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7029-6C3: (#2425)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2456) LC-SC 50 Micron Fiber Converter Cable
50 micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 50 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 7029-6C3: (#2456)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2459) LC-SC 62.5 Micron Fiber Converter Cable
62.5 micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 62.5 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 7029-6C3: (#2459)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter
(No Longer Available as of December 12, 2003)
The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a
non-bootable high performance Ultra3 SCSI RAID Adapter providing RAID
0,1,1E, 5, or 5E capability and can address up to sixty 16-bit SCSI
physical disk drives on four independent SCSI buses.
To increase the data writing performance, a 128 MByte fast-write cache
is provided as a resident part of this adapter. The 128 MByte fast-write
cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter
that utilizes non-volatile RAM. During the unlikely event of an PCI
4-Channel Ultra3 SCSI RAID Adapter failure, a replacement PCI 4-Channel
Ultra3 SCSI RAID Adapter can be installed and the fast-write cache can be
removed from the failing adapter and installed in the new adapter to help
ensure data integrity. The 128 MByte fast-write cache can provide an
significant improvement in data throughput and response time during
certain sequence write operations compared to SCSI RAID adapters without
the fast-write cache. The response time and data transfer improvement
will vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.
The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3
SCSI buses. There are two internal ports and four external ports. The
two internal ports are shared with two of the external ports. Two of the
four busses can drive either an internal port or an external port. The
other two busses only drive external ports. The internal ports can be
used to provide an internal RAID solution on supporting RS/6000 systems.
Systems with one or two internal 6-pack disks can attach to a PCI
4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide
connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate. The four external ports also provide connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate.
Limitations:
- The four external ports do not support the connection to the IBM
7131-105 external Fast/Wide SCSI disk enclosure.
- Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that
run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up
to 80MBytes/s), the internally attached disk drives will run at a maximum
SCSI bus data rate specified by that supporting system backplane.
In order for full support and to take full advantage of the Ultra3 (up
to 160 MBytes/s) speed of this adapter, the proper AIX level also needs
to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX
versions support the full range of SCSI bus data rates (including Ultra3
SCSI up to 160 MByte/s). Check the AIX level your system has or is able
to support.
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI bus slot
- For 7029-6C3: (#2498)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2611) Slimline Diskette Drive (Black bezel)
Diskette drive with storage capacity up to 1.44 MB on a high density
(2HD) floppy disk and 720 KB on a double density floppy disk. The
detailed physical dimensions are: height 21.1 mm (.83 inch); width 139.9
mm (5.51 inches); depth 83.8 mm (3.3 inches).
Characteristics:
- Height: 21.2 mm (.83 inch)
- Width: 139.9 mm (5.51 inches)
- Depth: 83.8 mm (3.3 inches)
- Amber color LED in-use indicator
- Slimline
- Low power consumption: 1.5 W typical (read/write mode)
- Operates in either vertical or horizontal positions
- Attributes provided: Diskette drive
- Attributes required: 1 open media bay
- For 7029-6C3: (#2611)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2623) 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
(No Longer Available as of September 24, 2004)
The SCSI-2 DVD-RAM drive is a multifunction storage device capable of
reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This
device also provides read/write compatibility with conventional 2.6GB
DVD-RAM discs. System boot and install functions are supported with
CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer
diameter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
- Interface: SCSI-2 supporting synchronous and asynchronous data
transfer
- Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
- High-speed synchronous burst rate of 10MB/second
- Loading tray accommodates both 8cm discs (in horizontal orientation
only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-recordable discs
- Reads CD-RW discs
- Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA
and audio
- Contains headphone output and line output for audio
Limitations:
(#2640) IDE Slimline DVD-ROM Drive
The 8X/24X(max) Slimline IDE DVD-ROM Drive is an internal tray loading
DVD-ROM drive providing up to 3600KB/sec (CD-ROM) and 10.3MB/sec
(DVD-ROM) data transfer rates. It is a 12.7mm Slimline form factor
multi-session capable, DVD-ROM drive which provides state of the art
performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4
GB DVD-ROM (double-sided) discs. This drive also reads Type II
(removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot
and install functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: CD-ROM=3600 KB/sec (max):
DVD-ROM=10.3MB/sec (max)
- Interface: IDE/ATAPI
- Avg. Random Access Time: CD-ROM=95ms(typical);
DVD-ROM=150ms(typical)
- Buffer Memory: 256KB
- Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4
GB(double-sided)
- Multisession capable (Reads CD/R & CD-R/W media)
- 12.7mm Slimline form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
Limitations:
- DVD video is not supported.
- DVD-ROM only reads CD-type formatted media with AIX 5.1.
- Attributes provided: 8X/24X(max) IDE DVD-ROM Drive
- Attributes required: 1 Slimline media bay
- For 7029-6C3: (#2640)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2709) ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
(No Longer Available as of June 25, 2004)
4-Port T1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
ARTIC960RxD Quad Digital Trunk adapter.
- Attributes provided: 4-Port T1 RJ48 cable
- Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk
Adapter
- For 7029-6C3: (#2709)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Requires fc# 6310.
(#2710) ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
(No Longer Available as of June 25, 2004)
4-Port E1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
the ARTIC960RxD Quad Digital Trunk Adapter.
- Attributes provided: 4-Port E1 RJ-48 cable
- Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk
Adapter
- For 7029-6C3: (#2710)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Requires fc# 6310.
(#2732) IBM Short-wave Serial HIPPI PCI Adapter for RS/6000
(No Longer Available as of December 10, 2004)
The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit
PCI adapter supporting TCP/IP over a serial HIPPI link. Data is sent and
received over optical fiber at 1.2 Gbps using the HIPPI standard 20/24
bit encoding scheme with short wave optical transducers. The effective
maximum data rate of the HIPPI interface is 800 Mbps.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements.
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Attachment to HIPPI Network
- Attributes required: One 32-bit PCI Slot and LPP 5765-E07
- For 7029-6C3: (#2732)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2849) POWER GXT135P Graphics Accelerator with Digital Support
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.
- Hardware Description:
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported:
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported:
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 7029-6C3: (#2849)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2861) ARTIC960Hx 4-Port EIA-232 Cable
- Attributes provided: 4-port EIA-232 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7029-6C3: (#2861)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Requires fc# 2947
(#2863) ARTIC960Hx 4-Port X.21 Cable
- Attributes provided: 4-port X.21 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7029-6C3: (#2863)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Requires fc# 2947
(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable
- Attributes provided: 4-port X.35 (DTE) cable for (#2947)
- Attributes required: One #2947 adapter
- For 7029-6C3: (#2864)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Requires fc# 2947
(#2871) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 T1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7029-6C3: (#2871)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2872) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 T1 Trunk lines.
- Attributes required: One (#6310) adapter and (#2871) cable
- For 7029-6C3: (#2872)
- Minimum required: 0
- Maximum allowed: 12 (Initial order maximum: 12)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2873) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7029-6C3: (#2873)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2874) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: H.100 bus connection between adapters
- Attributes required: Two to Four H.100 adapters
- For 7029-6C3: (#2874)
- Minimum required: 0
- Maximum allowed: 12 (Initial order maximum: 12)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 4-position cable should be used when
four or less adapters with H.100 connectors will be interconnected. When
more than 4 and less than or equal to 8 adapters will be connected, the
H.100 Bus 8-Drop Cable (#4353) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: None
- For 7029-6C3: (#2877)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2934) Asynchronous Terminal/Printer Cable EIA-232
The Asynchronous Printer/Terminal Cable is used for attaching
printers, plotters, and terminals that support the EIA-232 standard to
any asynchronous adapter. This cable is the equivalent of the
combination of FC 2936 (modem cable) and FC 2937 (printer/terminal
interposer) and replaces this method of printer/terminal attachment.
This cable is 3m (9.8 feet) long, uses DB25 connectors and is
supported on all RS/6000 systems using any asynchronous ports. It is
used in conjunction with:
- FC 2931 (8-port Async Adapter EIA232, ISA bus)
- FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
- Attributes provided: EIA232 device attachment capability
- Attributes required: Any RS/6000 Asynchronous port
- For 7029-6C3: (#2934)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2936) Asynchronous Cable EIA-232/V.24
Used to attach a modem to the standard I/O ports with the 10-pin to
25-pin converter cable (shipped with the system), 8-port Cable Assembly,
16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to
DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote
Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The
cable is 3 meters (9.8 feet) in length.
- Attributes provided: Modem attachment to async or serial port
- Attributes required: Async or serial port
- For 7029-6C3: (#2936)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 7029-6C3: (#2943)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2944) 128-Port Asynchronous Controller, PCI bus
(No Longer Available as of March 31, 2006)
The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.
RANs can also be used with this adapter. If these RANs are connected
the synchronous channel the data rate drops down to 1.2 Mbps. For the
best results keep the previous and new RAN's on separate synchronous
channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 7029-6C3: (#2944)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2946) Turboways 622 Mbps PCI MMF ATM Adapter
(No Longer Available as of December 17, 2004)
The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal
PCI Adapter. This adapter provides direct access to the ATM network at a
dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI
MMF ATM Adapter is a short form-factor adapter that interfaces to the
system via the PCI bus and connects to the 622 Mbps ATM network via
dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF
ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for
packet memory. This ATM adapter also provides a hardware assist for TCP
checksum which can provide a performance improvement by minimizing the
host CPU cycles.
- Attributes provided: One full-duplex connection to 622 ATM network
- Attributes required: One available PCI card slot
- For 7029-6C3: (#2946)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one
slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of:
EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of
up 2.0M bps. Software support is provided by ARTIC960 Support for AIX,
Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC
and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that
provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations.
- Attributes provided: One to four WAN connections at up to 2.0Mbps
- Attributes required: One full length 32-bit PCI slot, AIX Version
4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5,
4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
- For 7029-6C3: (#2947)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2951) Cable, V.24 / EIA-232
(No Longer Available as of December 30, 2005)
V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7029-6C3: (#2951)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2952) Cable, V.35
(No Longer Available as of December 30, 2005)
V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7029-6C3: (#2952)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2953) Cable, V.36 / EIA-499
(No Longer Available as of December 30, 2005)
V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter.
Maximum of two cables per #2962.
- For 7029-6C3: (#2953)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2954) Cable, X.21
(No Longer Available as of December 30, 2005)
X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7029-6C3: (#2954)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2962) 2-Port Multiprotocol PCI Adapter
(No Longer Available as of December 30, 2005)
This adapter provides high-speed connections between stand-alone
system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI
Adapter connects via external communications equipment including Channel
Service Units (CSU), Data Service Units (DSU), or through synchronous
modems.
This adapter together with IBM AIXlink/X.25 provides a two-port
connection to X.25 packet switched networks. IBM AIXlink/X.25 is a
separately orderable LPP (5696-926).
2-Port Multiprotocol PCI Adapter with an appropriate cable is
compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954)
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952)
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
- CCITT V.10 Electrical
- CCITT V.11 Electrical
- Attributes provided: Two high speed WAN connections
- Attributes required: One PCI slot
- For 7029-6C3: (#2962)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3124) Serial to Serial Port Cable for Drawer/Drawer
This 3.7 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted within
the same rack. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#3124)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3125) Serial to Serial Port Cable for Rack/Rack
This 8 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted in
separate racks. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#3125)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3273) 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
(No Longer Available as of March 31, 2005)
The 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 36.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3273)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3274) 73.4GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.82 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3274)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3275) 146.8GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra320
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, and and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3275)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required: AIX 5.1 or AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3277) 36.4GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 36.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3277)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3278) 73.4GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3278)
- Minimum required: 0
- Maximum allowed: 8 (Initial order maximum: 8)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3279) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra3
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 107 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3279)
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7029-6C3: (#3578)
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable
(No Longer Available as of February 27, 2004)
The P260/P275 monitor has the following general characteristics:
- Business Black color
- 21-inch Flat Trinitron** CRT with a viewable image size of 503 mm
(19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum
addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.
Note: The P260 and P275 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7029-6C3: (#3628)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3636) L200P Flat Panel Monitor
The L200p flat-panel monitor has the following general
characteristics:
- Business Black color
- 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm
(20.1 inches) measured diagonally, incorporating a 0.255 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7029-6C3: (#3636)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable
The T541H and the L150p monitors have the following general
characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 7029-6C3: (#3637)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
(No Longer Available as of June 24, 2005)
The IBM C220p monitor has the following general characteristics:
- Business Black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7029-6C3: (#3638)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3639) IBM ThinkVision L170p Flat Panel Monitor
(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:
- Business color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.264mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7029-6C3: (#3639)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
The IBM ThinkVision L171p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
- Contrast ratio: 500:1 (minimal) 700:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7029-6C3: (#3640)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3642) - ThinkVision L191P Flat Panel Monitor
The ThinkVision L191p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7029-6C3: (#3642)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3752) - Service Package
This kit contains publications, wrap plugs, and diagnostic CD-ROM.
The "Diagnostics Information for Multiple Bus Systems" contains
information common to all multiple bus system units and is used primarily
for problem isolation by a customer's service specialist trained on the
unit being serviced.
These publications are intended to be used in the customer's
enterprise by the customer's own service specialists, and not by IBM
Service personnel.
Two wrap plugs are included for use in diagnostic testing of the
following connections to the system unit:
- RS-232 serial I/O port
- parallel I/O port
This kit also contains system diagnostic CD-ROM, along with a test
diskette, for use by the customer's service specialist (not by IBM
Service personnel).
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#3752)
- Minimum required: 0
- Maximum allowed: 1) (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3925) Serial Port Converter Cable, 9-Pin to 25-Pin
This cable converts the 9-pin serial port on the system to a 25-pin
serial port which allows the user to attach 25-pin serial devices to the
system.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#3925)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3926) Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
This 4-meter cable and transposer (2 parts) allows external async
devices such as printers or terminals to be attached directly to the
9-pin serial port. This is equivalent to using #3925 in combination with
#2934.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#3926)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
This cable is required to connect displays with a 15-pin "D" shell
connector to the appropriate accelerator connector when it is farther
away than the attached monitor cable can reach. Rack mounted systems are
likely candidates for this extender cable.
- Attributes provided: 6-foot extension cable
- Attributes required: Supported monitor and adapter with a 15-pin "D"
shell connector.
- For 7029-6C3: (#4242)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4256) Extender Cable - USB Keyboards, 2M
This feature provides a 2M extension cable for use with USB keyboards.
- Attributes provided: 2M Extension Cable
- Attributes required: USB Keyboard
- For 7029-6C3: (#4256)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: Linux
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4263) SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media Device; Mounting Tray
This feature number provides a SCSI LVD logic and power cable that
connects the SCSI controller on the system planar to the SCSI media bay.
Required when installing a SCSI LVD device in the SCSI media bay. Also
includes a mounting tray for the SCSI LVD media device.
- Attributes provided: Connection between SCSI controller and the SCSI
media bay. Mounting tray.
- Attributes required: SCSI LVD device in SCSI media bay.
- For 7029-6C3: (#4263)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4266) SCSI Cables (Power and Logic), PCI Riser to SCSI Media Device; Mounting Tray
This feature number provides a SCSI logic and power cable that
connects the SCSI controller on the system planar to the SCSI media bay.
Required when installing a SCSI device (non-LVD) in the SCSI media bay.
Also includes a mounting tray for the SCSI media device.
- Attributes provided: Connection between SCSI controller and the SCSI
media bay. Mounting tray.
- Attributes required: SCSI device (non-LVD) in SCSI media bay.
- For 7029-6C3: (#4266)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4267) SCSI Cable, PCI Adapter to Hot-Swap Disks
SCSI cable that connects a PCI adapter to the hot swap disks.
- Attributes provided: Connection between adapter and hot swap disk
drives.
- Attributes required: None
- For 7029-6C3: (#4267)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Requires #6584.
(#4270) - External SCSI Port Enablement Cable
SCSI cable that connects one SCSI internal controller to an external
port allowing attachment of external SCSI devices to the system.
Installing this feature in the system will negate the usage of a second
four-pack disk enclosure (second #6574 or first #6584), and uses 1 slot.
- Attributes provided: External SCSI port
- Attributes required: One internal SCSI controller and 1 PCI slot
- For 7029-6C3: (#4270)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX V5.1 or AIX V5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4353) H-100 Bus 8-position Cable
(No Longer Available as of December 10, 2004)
This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 8-position cable should be used when
more than four and less than or equal to eight adapters with H.100
connectors will be interconnected. If four or less adapters are
interconnected, the H.100 Bus 4-Drop Cable (#2877) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: None
- For 7029-6C3: (#4353)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4445) 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 4096MB of system memory with 4 1024MB DIMMs.
- Attributes provided: 4096MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#4445)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4446) 1024MB (4x256MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 1024MB of system memory with 4 256MB DIMMs.
- Attributes provided: 1024MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#4446)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4447) 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 2048MB of system memory with 4 512MB DIMMs.
- Attributes provided: 2048MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#4447)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4448) 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
(No Longer Available as of September 22, 2004)
Provides 4096MB of system memory with 4 1024MB DIMMs.
- Attributes provided: 4096MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#4448)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4449) 8192MB (4x2048MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 8192MB of system memory with 4 2048MB DIMMs.
- Attributes provided: 8192MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#4449)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4651) Rack Indicator, Rack #1
This indicator is used to specify the first rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the first rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4651)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4652) Rack Indicator, Rack #2
This indicator is used to specify the second rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the second rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4652)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4653) Rack Indicator, Rack #3
This indicator is used to specify the third rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the third rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4653)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4654) Rack Indicator, Rack #4
This indicator is used to specify the fourth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fourth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4654)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4655) Rack Indicator, Rack #5
This indicator is used to specify the fifth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the fifth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4655)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4656) Rack Indicator, Rack #6
This indicator is used to specify the sixth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the sixth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4656)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4657) Rack Indicator, Rack #7
This indicator is used to specify the seventh rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the seventh rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4657)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4658) Rack Indicator, Rack #8
This indicator is used to specify the eighth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the eighth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4658)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4659) Rack Indicator, Rack #9
This indicator is used to specify the ninth rack of a multi rack
complex. It is also used to specify that a rack mounted device (such as
an I/O drawer) is to be mounted in the ninth rack of a multi rack
complex.
- Attributes provided: Rack specify
- Attributes required: Rack
- For 7029-6C3: (#4659)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4691) Rack Status Beacon Cable, Junction Box To Drawer Or Status Beacon
(No Longer Available as of November 18, 2005)
This cable can be used to connect the Rack Status Beacon Junction Box
to a supported rack drawer or to the Rack Status Beacon.
- Attributes provided: Connection between Rack Status Beacon
components
- Attributes required: None
- For 7029-6C3: (#4691)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4692) Rack Status Beacon Cable, Junction Box Daisy Chain
(No Longer Available as of November 18, 2005)
This cable is used to connect two Rack Status Beacon Junction Boxes
(#4693) together. Multiple Junction Boxes may be linked in series, as
required.
- Attributes provided: Connection between (#4693) Junction Boxes
- Attributes required: Two or more (#4693) Junction Boxes
- For 7029-6C3: (#4692)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4693) Rack Status Beacon Junction Box
(No Longer Available as of November 18, 2005)
This feature provides six input connectors and one output connector
for racks configured with the Rack Status Beacon (#4690). Multiple
Junction Boxes can be linked together in series with Daisy Chain Cable
#4692.
- Attributes provided: Connection of multiple drawers to a single Rack
Status Beacon (#4690).
- Attributes required: Feature #4690 and two or more #4691 cables.
- For 7029-6C3: (#4693)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4953) IBM 64bit/66MHz PCI ATM 155 UTP Adapter
(No Longer Available as of December 17, 2004)
The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155
Mbps full-duplex connection to ATM networks over either permanent virtual
circuits (PVC) or switched virtual circuits (SVC). This adapter enables
TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair
(UTP). It also supports communication with devices located on an ATM
network or bridged to a Token-Ring, Ethernet, or other LAN.
- Attributes provided: One ATM 155 UTP connector
- Attributes required: One PCI slot
- For 7029-6C3: (#4953)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter
(No Longer Available as of March 31, 2006)
The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to
ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155
Mbps full-duplex connection using permanent virtual circuits (PVC) or
switched virtual circuits (SVC) and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on
an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
This 155 Mbps PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
- Attributes provided: One ATM 155Mbps MMF connection
- Attributes required: One PCI slot
- For 7029-6C3: (#4957)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4959) IBM Token-Ring PCI Adapter
(No Longer Available as of March 31, 2006)
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short,
32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either
half-duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into
the ring, even when connected to speed-sensing hubs. This adapter will
operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45
connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin
D-shell connectors. The Token-Ring PCI Adapter will provide network boot
capability.
- Attributes provided:
- Attributes required: A single empty 32-bit PCI adapter slot.
- For 7029-6C3: (#4959)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4960) IBM e-business Cryptographic Accelerator
The IBM e-business Cryptographic Accelerator is a short form factor
PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure
Web transaction, SSL operations is a key requirement. To do this,
public-key cryptographic operations using SSL handshake protocol is
employed. The IBM e-business Cryptographic Accelerator is a hardware
cryptographic solution that off-loads this compute-intensive public-key
cryptographic processing from the host.
The overall operation control, including command decoding, is
implemented in hardware and requires no on-card microprocessor subsystem.
As such, the adapter is a less expensive alternative to those who do not
need the high security of the on-card secure programming environment such
as is offered by the PCI Cryptographic Coprocessor(#4958), but do need
the high cryptographic performance that hardware acceleration provides by
offloading the host processor. Note: The IBM e-business Cryptographic
Accelerator is only supported by the industry standard PKCS #11
application programming interface (API) Version 2.01, and applications
which interface to the PKCS #11 Support Program.
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7029-6C3: (#4960)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4961) IBM Universal 4-Port 10/100 Ethernet Adapter
(No Longer Available as of March 31, 2006)
IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long,
64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10
Base-T or 100 Base-T interfaces either half or full duplex. Each port is
provided with it's own RJ-45 connector for attachment to standard CAT-3/5
Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u
compatible and provides full auto-negotiation for detecting speed and
duplex capability across each port. Network boot capability and Network
Install Manager (NIM) capability are available using this adapter if no
specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet
Adapter (#4961) should be considered where maximum port density is
required per I/O card slot. But, for high end systems, where card slots
are not the limiting factor and maximum throughput is required, the
single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM
10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions.
Below are some performance factors to consider when choosing the right
adapter for your needs. These performance comparisons are based on all
four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961)
being active.
- With all four ports under full bandwidth conditions, a single IBM
Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver
up to 3 times the comparable performance of a single IBM 10/100 Mbps
Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI
Adapter (#2968).
- Under most conditions, each port of the IBM Universal 4-Port 10/100
Ethernet Adapter (#4961) is expected to perform at greater than 50% the
throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter
II (#4962) or the IBM 10/100 Mbps Eth ernet PCI Adapter (#2968).
Note: The resulting performance in your environment compared to the above
may vary and depends upon the RS/6000 model, the I/O configuration, and
associated workload of your applications.
- Attributes provided: 4 ports of 10/100 Base-Tx Ethernet
- Attributes required: 1 PCI slot
- For 7029-6C3: (#4961)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4962) 10/100 Mbps Ethernet PCI Adapter II
(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
- Half / Full Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates)and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later. Note: This IP Security function
is not supported with AIX 4.3 software.
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 7029-6C3: (#4962)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5001) Customer Service Specify
This feature code specifies that the system will receive special
request services from the Center for Customer Services (CCS) in
Rochester.
- Attributes provided: Customization
- Attributes required: None
- For 7029-6C3: (#5001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5005) Software Preinstall
Licensed programs may be preinstalled on the media selected. To order
this option, specify code (#5005) on the initial system order. The
preinstalled licensed programs will be at the same release level as
programs being shipped from the Program Libraries at the time the system
is manufactured. This specify code does not apply to Linux.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#5005)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5220) 1-way 1.2 GHz POWER4+ Processor Card
1-way processor card with 1.20 GHz POWER4+ processor and 8MB of L3
cache.
- Attributes provided: 1-way processor card
- Attributes required: 1 processor card slot
- For 7029-6C3: (#5220)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5222) 2-way 1.2 GHz POWER4+ Processor Card
2-way processor card with 1.20 GHz POWER4+ processor and 8MB of L3
cache.
- Attributes provided: 2-way processor card
- Attributes required: 1 processor card slot
- For 7029-6C3: (#5222)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5234) - 2-way 1.45 GHz POWER4+ Processor Card on Planar
2-way processor card with 1.45 GHz POWER4+ processor and 8MB of L3
cache. Attached to planar.
- Attributes provided: 2-way processor card
- Attributes required: None
- For 7029-6C3: (#5234)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7029-6C3: (#5700)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64 bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7029-6C3: (#5701)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter
The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit
3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing
RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI
physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 40 MByte fast-write cache
is provided as a resident part of this adapter. The 40 MByte fast-write
cache is resident on the Dual Channel Ultra320 SCSI RAID Adapter and
utilizes non-volatile RAM. The 40 MByte fast-write cache can provide an
significant improvement in data throughput and response time during
certain sequence write operations compared to SCSI RAID adapters without
the fast-write cache. The response time and data transfer improvement
will vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.
The Dual Channel Ultra320 SCSI RAID Adapter has two independent
ultra320 SCSI buses. There are two internal ports and two external
ports. The two internal ports are shared with the two external ports.
The SCSI busses can drive either an internal port or an external port.
The internal ports can be used to provide an internal RAID solution on
certain supporting pSeries systems with internal multiple disk drives or
packs of drives. Internally attached Ultra320 devices are designed to
run at a data rate of up to 320 MB per second on systems that have
internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or external ports) are required to be formatted to 522 byte
sectors. 522 byte sectors provide additional CRC error checking for
improved data integrety. A menu option is provided in the AIX supporting
software which will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array, a similar
menu option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors.
Also, there are some disk drives which do not support being formatted
to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the
user of these known situations when they exist. For disk microcode
updates, go to the following web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI RAID Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate configured as either a non-array or
an array of disks. Also the two external ports provide non-array
connectivity to numerous other SCSI external subsystems. Check the
external subsystem sales/web pages for verification of connectivity
support with this adapter.
Limitations:
- The two external ports provide connectivity to an IBM 2104-DU3
Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower
at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only
non-array configuration support.
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI or PCI-X bus slot
- For 7029-6C3: (#5703)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full
Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For
optimum performance, the adapter should be placed in a 64 bit PCI-X card
slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7029-6C3: (#5706)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7029-6C3: (#5707)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5709) Dual Channel SCSI RAID Enablement Card
(No Longer Available as of March 31, 2006)
The Dual Channel SCSI RAID Enablement Card (#5709) is a bootable high
performance SCSI RAID Enablement feature providing RAID 0,5, or 10
capability to select pSeries systems with the appropriate supporting
integrated SCSI adapter and internal multiple disk drives or packs of
drives.
To increase the data writing performance, a 16 MByte fast-write cache
is provided as a resident part of this feature and utilizes non-volatile
RAM. The 16 MByte fast-write cache can provide an improvement in data
throughput and response time during certain sequence write operations
compared to SCSI RAID adapters without the fast-write cache. The
response time and data transfer improvement will vary depending upon the
data block sizes, the percentage of sequential writes, machine
type/model, and application parameters.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array are required to be
formatted to 522 byte sectors. 522 byte sectors provide additional CRC
error checking for improved data integrety. A menu option is provided in
the AIX supporting software which will reformat these disk drives prior
to their usage in an array. Conversely, when a disk drive is removed
from an array, a similar menu option is also provided to re-format them
back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors.
Also, there are some disk drives which do not support being formatted
to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the
user of these known situations when they exist. For disk microcode
updates, go to the following web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Limitations:
- Even though the supporting integrated adapter with the Dual Channel
SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up
to 320 MBytes/s), the internally attached disk drives will run at a
maximum SCSI bus data rate specified by that supporting system disk
backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Internal disk drives to be configured as an
array.
- Attributes required: Systems with supporting integrated SCSI
adapter.
- For 7029-6C3: (#5709)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5712) PCI-X Dual Channel Ultra320 SCSI Adapter
(No Longer Available as of March 31, 2006)
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3
volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two
SCSI channels (busses), each capable of running 320 MBps (max.), up to
twice the maximum data transfer rate of the previous Dual Channel Ultra3
SCSI adapter (160 MBps). Each SCSI bus can either be internal (on
systems that support internal SCSI device or backplane attachments) or
external. Internally attached Ultra320 devices can run at a data rate of
up to 320 MB per second on systems that have internal backplanes that are
capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate. The two external ports also
provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1
Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also
the two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot
adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or
RS/6000 systems. The adapter also supports target mode.
Limitations:
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available 3.3 volt PCI or PCI-X slot
- For 7029-6C3: (#5712)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5716) 2 Gigabit Fibre Channel PCI-X Adapter
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit
address/data, short form factor PCI-X adapter with an LC type external
fiber connector that provides single or dual initiator capability over
an optical fiber link or loop. With the use of appropriate optical
fiber cabling, this adapter provides the capability for a network of
high-speed local and remote located storage. The 2 Gigabit Fibre Channel
PCI-X Adapter will auto-negotiate for the highest data rate (either 1
Gbps or 2 Gbps) of which the device or switch is capable. Distances of
up to 500 meters running at 1 Gbps data rate and up to 300 meters
running at 2 Gbps data rate are supported between the adapter and an
attaching device or switch. When used with IBM supported Fibre Channel
storage switches supporting long-wave optics, distances of up to 10
kilometers are capable running at either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber onnector(s), use of
an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required
order Feature Code #6239- 2 Gigabit Fibre Channel PCI-X Adapter
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 7029-6C3: (#5716)
(#5718) 10 Gigabit Ethernet-SR PCI-X Adapter
Provides 10 Gigabit Ethernet PCI-X based server connections. Supports
distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um
multimode fiber. Adapter connector type is LC.
- Attributes provided: Conforms to the IEEE 802.3ae standard
- Attributes required: Supported on PCI-X slots only
- For 7029-6C3: (#5718)
(#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter
Offers 10 Gigabit Ethernet PCI-X based server connections
over a maximum of 10 kilometers of 1310nm single-mode fiber optic cable.
The adapter conforms to the IEEE 802.3ae standard. The adapter
requires 9um single-mode fiber optic cables and uses a SC connector
type for connecting into net-work infrastructure components like 10
Gigabit Ethernet switch/router with SC connectors.
- Attributes provided: 10 Gigabit Ethernet connections
- Attributes required: Available PCI-X slot
- For 7029-6C3: (#5719)
(#5723) 2 Port Asynchronous EIA-232 PCI Adapter
Connection for 2 Asynchronous EIA-232 devices. Ports are
Programmable to support EIA-232 protocols, at a line speed of 128K bps.
- Attributes provided: 2 Asynchronous Ports
- Attributes required: One PCI Slot
- For 7029-6C3: (#5723)
(#5752) 4.7 GB SCSI DVD-RAM Drive
The 4.7 GB SCSI DVD-RAM Drive is an internal tray loading,
multifunction storage device capable of reading and writing 4.7GB DVD-RAM
discs as well as reading a multitude of other optical media discs. This
drive also reads Type II (removable from cartridge) DVD-RAM discs. It
is a half high form factor, multi-session capable, DVD-RAM drive which
provides state of the art performance. System boot and install functions
are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 4800 KB/sec CD-ROM (32X) max @ outer
diameter; 13.5 MB/sec read (10X DVD-ROM); 2.77 MB/sec write
(2X DVD-RAM) and 2.77 MB/sec read (2X DVD-RAM)
- Interface: SCSI
- Average Random Access Time: 110 ms CD-ROM; 130 ms DVD-ROM; 150 ms
DVD-RAM
- Buffer Memory: 2 MB
- Loading tray accommodates both 8cm discs and 12cm discs.
- Operates in either vertical or horizontal position
(8cm discs in horizontal position only)
- Reads multi-session discs
- Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs.
- Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB
double sided DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2,
XA, CDDA and audio
Limitations:
- DVD video is not supported.
- Drive only reads CD-type formatted media with AIX 5.1.
- Attributes provided: One 4.7GB IDE DVD-RAM Drive
- Attributes required: One half high media bay
- For 7029-6C3: (#5752)
(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology
The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and achieve functions. This tape drive uses
VXAtape** data cartridges and is compression capable, providing a
capacity of up to 160 GB - a significant increase in capacity over the
previous internal tape drives.
Characteristics
- Capacity: 80 GB native mode, 160 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: uses VXAtape data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
- Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
- Compatability: 80 GB mode (Read/Write), 160 GB compression
(Read/Write)
- Attributes provided: One 80/160 GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 7029-6C3: (#6120)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6134) 60/150 GB 16-bit 8mm Internal Tape Drive
(No Longer Available as of March 31, 2005)
The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch
half-high, 16-bit tape drive. This drive provides a high capacity tape
drive for save/restore and archiving functions. This tape drive uses IBM
8mm data cartridges and is compression capable, providing a capacity of
up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm
internal tape drive.
The (#6134) 60/150 GB 16-bit 8mm Internal Tape Drive, is limited to a
maximum system ambient operating temperature of 31C (87.8 F) at a maximum
operating altitude of 2134 m (7000 ft.). Lower altitudes have higher
maximum ambient operating temperatures. Refer to the "IBM Site and
Hardware Planning Information Guide" (SA38-0508) for additional details.
Characteristics:
- Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge with Smart Clean Technology
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical)
Compression M
- Interface: SCSI-2 16-bit Low Voltage Differential(LVD) /
Single-ended (SE) Asynchronous/Synchronous
- Compatibility: See the following Technical Support Web page (8mm
Tape Interchange Information section) for compatability information:
- http://techsupport.services.ibm.com/server/
mdownload/tapewhdr.html
- Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive
- Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 7029-6C3: (#6134)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6158) 20/40GB 4mm Internal Tape Drive
The 20/40 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high,
single-ended 16-bit tape drive, which provides a high capacity for
save/restore and achieve functions. This tape drive uses IBM 4-mm data
cartridges and is compression capable, providing a capacity of up to 40
GB - a significant increase in capacity over the previous 12/24 4-mm
internal tape drives (when using DDS-4 media).
Characteristics:
- Capacity: 20 GB native mode, 40 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm DDS-4 data cartridge
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
- Interface: SCSI-2 (single ended) asynchronous/synchronous
- Compatability: 4 GB mode (Read/Write), 8 GB compression
(Read/Write); 12 GB mode(Read/Write), 24 GB compression (Read/Write), 20
GB mode (Read/Write), 40 GB compression (Read/Write).
Note: MES orders are shipped with both a black and a white bezel.
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address
- For 7029-6C3: (#6158)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6203) PCI Dual Channel Ultra3 Adapter
(No Longer Available as of December 12, 2003)
The PCI Dual Channel Ultra SCSI Adapter (#6203) is a 64-bit adapter
and is an excellent solution for high-performance SCSI applications. The
PCI Dual Channel Ultra3 SCSI Adapter provides two SCSI channels (busses).
Each SCSI bus can either be internal (on systems that support internal
SCSI device or backplane attachments) or external and will support a data
rate of up to 160 MBytes per second, up to twice the maximum data
transfer rate of the previous Dual Channel Ultra3 adapter (80 MBytes per
second).
In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes
per second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this Ultra3 160 MBytes per second performance, all attaching
devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2
and Ultra3 devices coexist on the same bus, each device will operate at
its rated speed. For lower speed single-ended (SE) devices, the SCSI bus
will switch to single-ended (SE) performance and interface at the lower
SE bus data rate of the device.
Two industry-standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin, (#2118)
can be used with older external SE subsystems to allow connection to the
VHDCI connector on the PCI Dual Channel Ultra3 SCSI Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI port will auto-throttle to a "Fast"
interface speed running no faster than a 20MB/s maximum. This
auto-throttle function is performed to ensure best signal quality
between host adapter and attaching subsystem. The second external port
is unaffected unless a SE subsystem is also attached to it. If so, it
would also auto-throttle as described above.
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot
adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the
supported pSeries or RS/6000 systems.
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available PCI slot
- For 7029-6C3: (#6203)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.2, or later. Linux - Refer to the
following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6204) PCI Universal Differential Ultra SCSI Adapter
(No Longer Available as of December 30, 2005)
The PCI Universal Differential Ultra SCSI Adapter is the latest
technology advancement of an RS/6000 SCSI-2 differential adapter with a
maximum data transfer rates of 40 MBytes per second. This adapter has
the capability to be plugged into the newer +3.3 volt PCI slots as well
as the older +5 volt PCI slots. Feature code # 6204 allows connection to
external differential SCSI-2 F/W or Ultra SCSI type devices up to 25
meters away. Feature code # 6204 is designed to negotiate with each
external device and transfer data at the fastest SCSI data transfer rate
capable by the external device. Check system sales pages as to which
external differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra)
documentation. Industry standard 68 pin connectors are incorporated
(SCSI "P" connector definition of X3T9.2/90-048).
- Attributes provided: 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 7029-6C3: (#6204)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or AIX 5.2, or later. Linux - Refer to
the following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6230) Advanced SerialRAID Plus Adapter
(No Longer Available as of June 24, 2005)
The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop)
Serial Storage Architecture (SSA) adapter providing an instantaneous data
transfer rate of up to 160 MByte/s per loop. It also provides
eight-initiator, non-RAID capability, two-initiator RAID 1, two-initiator
RAID 0 + 1, two-initiator RAID 5, or one-initiator RAID 0 capability.
The adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that
improves write performance in RAID 0+1, RAID 5, and non-RAID
applications. When the 32 MByte Fast-Write Cache Option Card is used,
the adapter can be configured in either single or dual initiator
fast-write cache mode. In dual initiator fast-write cache mode, if one
of the two adapters fail, the failing adapter is designed to transfer
control over to the other. Also, in dual initiator Fast Write Cache
mode, the 128 MByte DRAM Option Card (#6231) is available and required
to utilize the full 32 MBytes of fast-write cache on the adapters. If
the 128 MByte DRAM Option Card is not used in dual initiator fast-write
cache mode, the effective fast-write cache capacity will be 16 MBytes on
each adapter. See the 128 MByte DRAM Option Card (#6231) for
information.
The Advanced SerialRAID Plus Adapter when operated in a RAID 5
configuration will support (2+P) to (15+P) arrays and up to 6 (15+P)
arrays. When operated in a RAID 1 or RAID 0+1 configuration, will
support up to eight disk drives mirrored. The adapter also supports Hot
Spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter
also supports connectivity to external disk enclosures and internal
RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also
supported (Refer to IBM 7133 Sales literature for additional information)
Any supported RS/6000 system can be set up to boot from an Advanced
SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included
as part of the configuration. Other disks associated with the adapter
can be RAID but at least one disk must be a non-RAID SSA disk. The
non-RAID SSA disk can be located under the covers of a processor unit or
in an external SSA storage unit. If your system is running with AIX
4.3.3 or later software, native boot capability is supported. For
factory system orders with AIX preload requested, an internal SCSI disk
drive will be preloaded as the native boot disk even if internal SSA disk
drive(s) are present. If your system is running with AIX 4.2.1 or AIX
4.3.2 software, the below procedure applies in order to boot using the
Advanced SerialRAID Plus Adapter:
- The non-RAID SSA disk can be located under the covers of a processor
unit or in an external SSA storage unit.
- A supported AIX version of software (with proper updates) must be
loaded to the non-RAID SSA disk using AIX's Network Install Manager
(NIM) before booting from the non-RAID disk.
- The system with a non-RAID SSA disk must have a network connection
with another RS/6000 system performing the NIM Master function to perform
the install. On RS/6000 SP systems, a similar network install is
performed from a control workstation.
- Once AIX with updates is installed on the non-RAID SSA disk and the
system is configured for booting, booting will take place from the boot
disk without any support from the control processor or NIM Master and the
system does not have to be connected to the network at boot time.
After October 3, 2000, a 3-Way Copy Function will be available. This
3-Way Copy Function allows a user to create a third copy to an existing
RAID-1 or RAID 0+1 array while mirrored operation continues. 3-Way Copy
allows the user, at any time after the copy process has completed, to
split the third copy off from the original RAID-1 or RAID 0+1 array to
form an independent RAID copy. This third copy or "snapshot" copy could
be typically used to perform a backup or to test some new application.
The 3-Way Copy Function is available only via a code download and can
only be gained by going to the SSA web support pages defined below.
When performing SSA device or subsystem planning, installation,
upgrades, or preventive maintenance, refer to the following Web support
pages. They provide access to the latest SSA publications and support
code for the system, SSA adapters, and SSA subsystems. These sites
should also be considered during system hardware and/or operating system
upgrades if SSA devices are included in the system.
http://www.storage.ibm.com/hardsoft/products/ssa/
The above link contains links to SSA publications and other SSA Web
sites, including the one below.
http://www.storage.ibm.com/hardsoft/products/ssa/rs6k/index.html
The above link contains lists of the latest SSA support code and
provides code download capability for the RS/6000 and AIX environments.
LIMITATION: Internal ports on the adapter are not supported. See
machine/model specific information to determine if internal SSA disk
drives and associated hardware/cables are supported.
- Attributes provided: Attachment of SSA devices
- Attributes required: One PCI bus slot
- For 7029-6C3: (#6230)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6231) 128 MByte DRAM Option Card
(No Longer Available as of June 24, 2005)
The 128 MByte DRAM Option Card (#6231) is a field only optional
feature to the Advanced SerialRAID Adapter (#6225) or a factory or field
option for the Advanced SerialRAID Plus Adapter (#6230). This option is
recommended for dual initiator fail-over Fast Write Cache (FWC)
configurations. The option increases the existing DRAM on the adapter to
128 MBytes. In this type of dual initiator FWC configuation, the
existing DRAM does not have enough capacity to completely contain a copy
of each adapter's 32 MByte FWC and also provide additional working space.
The 128 MByte DRAM Option Card provides this additional space needed to
contain a full copy of each adapters 32 MByte FWC content and allows for
full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card
(#6231) is not used with dual-initiator FWC configurations, the effective
FWC capacity is reduced to 16 MBytes per adapter.
If this feature is ordered as a field upgrade to an existing
SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software
and publications are also provided.
- Attributes provided: 128 MByte DRAM memory
- Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced
SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card
(#6235) is also recommended.
- For 7029-6C3: (#6231)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6235) 32 MByte Fast-Write Cache Option Card
(No Longer Available as of June 24, 2005)
The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte
fast-write optional feature that plugs into the IBM RS/6000 Advanced
SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus
(#6230). It utilizes non-volatile RAM. During the unlikely event of an
Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID
Adapter can be installed and the fast-write cache can be removed from the
failing adapter and installed in the new adapter insuring data integrity.
The 32 MByte Fast-Write Cache Option Card can provide a significant
improvement of data throughput and response time during certain sequence
write operations compared to SSA RAID adapters without the fast-write
cache. The response time and data transfer improvement using the
optional card will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters. The 32 MByte Fast-Write Cache Option Card plugged into the
Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or
RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write
Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (#
6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in
single-initiator or dual initiator configurations.
- Attributes provided: None
- Attributes required: One Advanced SerialRAID Adapter (#6225) or
Advanced SerialRAID Plus Adapter (#6230).
- For 7029-6C3: (#6235)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6239) 2 Gigabit Fibre Channel PCI-X Adapter
(No Longer Available as of December 30, 2005)
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber onnector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 7029-6C3: (#6239)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#6266) Power Supply, 680 Watt AC, Hot-swap, Base and Redundant
This feature provides a 680 Watt AC power supply, either as the
primary power supply in the system, or the secondary power supply for
redundant power. Each power supply, base and redundant, comes with one
power cord
- Attributes provided: 680 Watt AC Power Supply
- Attributes required: Available Power Supply Bay
- For 7029-6C3: (#6266)
- Minimum required: 1
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6310) IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
(No Longer Available as of June 25, 2004)
Provides voice processing for up to four T1 or E1 digital trunks,
providing connectivity for 96 (T1) or 120 (E1) voice channels in a single
PCI slot. The voice processing function is provided by Voice Response
for AIX LPP. Several network attachment cables are available in support
of this adapter and the correct cable should be selected for either T1 or
E1 networks. (Select from cable features: 2709 (T1,RJ-45), 2710 (E1,
RJ-45), 2871/2872 (T1, 100 ohm), 2873/2874 (E1, 120 ohm).
Note: When more than one IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
(#6310) is ordered, the Artic960RxD Quad DTA, H.100, 4-drop Cable (#2877)
is required.
Note: When a Digital Trunk Quad PCI adapter (#6309) is already present
and an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered,
an IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and IBM
ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879) are
required.
Note: When an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is
ordered and an IBM ARTIC960RxD DSP Resource PCI Adapter (#2949) is
already present, the IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable
(#2878) and the IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter
Cable (#2879) are required.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements.
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Connection of 1 to 4 T1/E1 Trunk lines.
- Attributes required: Available PCI slot, appropriate cables and
WebSphere Voice Response for AIX LPP application software.
- For 7029-6C3: (#6310)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#6312) - Quad Digital Trunk Telephony PCI Adapter
The Quad Digital Trunk Telephony PCI Adapter is a highly integrated,
intelligent IO adapter designed for use in computer telephony
applications. The adapter is a 4 port, full length, universal PCI 2.2
compliant adapter. It performs voice processing for up to four T1 or E1
digital trunks, providing connectivity for 96 (T1) or 120 (E1) voice
channels in a single PCI slot. The adapter is made up of two separate
cards. A base card that interfaces with the host system and performs
telephony processing functions, and a daughter card that provides the
physical interface to the switch. The voice processing function is
provided by WebSphere Voice Response for AIX LPP with Direct Talk
Technology.
In conjunction with this adapter, network attachment cables using
industry standard RJ-48 connector can be obtained from commercial cable
suppliers in a variety of lengths to suit the particular installation.
Additional information about these cables can be obtained by referring to
this adapter's Installation and User's Guide.
Note: When 2 to 4 Quad Digital Trunk Telephony PCI Adapters (#6312) are
ordered and planned to be used in a single partition, the Artic960RxD
Quad DTA, H.100, 4-drop Cable (#2877) is required. When more than 4 Quad
Digital Trunk Telephony PCI Adapters (#6312) are ordered and planned to
be used in a single partition, the H.100 Bus 8-Position Cable (#4353) is
required.
Limitations: The Quad Digital Trunk Telephony PCI Adapter (#6312)
cannot reside in the same system with the IBM ARTIC960RxD Quad Digital
Trunk PCI Adapter (#6310). The Quad Digital Trunk Telephony PCI Adapter
(#6312) is only supported in machines running in a full system partition.
- Attributes provided: Connection of 1 to 4 T1/E1 Trunk lines.
- Attributes required: One available PCI slot and WebSphere Voice
Response for AIX LPP application software.
- For 7029-6C3: (#6312)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6574) Ultra320 SCSI 4-Pack
This feature provides an enclosure that can contain up to 4 Ultra320
SCSI disk drives.
(#6584) Ultra320 SCSI 4-Pack for Disk Mirroring
This feature provides an enclosure that can contain up to 4 Ultra320
SCSI disk drives. Used for disk mirroring and requires Feature Number
5712, the PCI-X Dual Channel Ultra320 SCSI Adapter or Feature Number
5703, the PCI-X Dual Channel Ultra320 SCSI RAID Adapter or a follow-on,
and Feature Number 4267, the PCI-X adapter to hot-swap disk enclosure
cable.
(#7305) AAP Software Pre-Install Indicator
Software pre-install indicator for Authorized Assemblers.
- Attributes provided: Software Preinstall
- Attributes required: Authorized Assembler Order
- For 7029-6C3: (#7305)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8120) Attachment Cable, Hardware Management Console to Host, 6-Meter
This 6-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a 9-pin
female connector for HMC connection and a 9-pin male connection to attach
to the HMC port on the host system. A 9-pin to 25-pin adapter is also
provided.
- Attributes provided: 6-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7029-6C3: (#8120)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return Parts MES: No
(#8121) Attachment Cable, Hardware Management Console to Host, 15-Meter
This 15-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a 9-pin
female connector for HMC connection and a 9-pin male connection to attach
to the HMC port on the host system. A 9-pin to 25-pin adapter is also
provided.
- Attributes provided: 15-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7029-6C3: (#8121)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return Parts MES: No
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7029-6C3: (#8131)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7029-6C3: (#8132)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8133) RJ-45 to DB-25 Converter Cable
This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 7029-6C3: (#8133)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a
modified version of the existing 16-port Remote Async Node (feature #8130
or 8134) in an industry-standard 19-inch rack mount chassis to allow
simpler installation and ease-of-use. Like the existing RAN, it can also
be configured as a desktop device.
As an additional benefit, the metal chassis meets FCC Class B/CISPR B
when used with similarly rated RS/6000 host to meet the needs of
customers with these requirements.
The RANs provide 16 ports of EIA-232 capability with full modem
controls on each port and are connected to the 128-port Async Controller
(Micro Channel or ISA versions) residing in the host. RANs are connected
in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either
version).
The rack-mountable RAN offers these enhanced features:
- Industry-standard 19-inch rack mountable chassis (can be configured
for stacking on a desktop or mounted in a 19-inch rack).
- Meets FCC Class B/CISPR B when used with similarly rated RS/6000
host.
- All RJ-45 connectors are now on the front panel, greatly enhancing
cable management.
- The DB-15 synchronous connectors (cabling from host to RAN and
between RANs) and the power cord and switch are located on the rear
panel.
- Power supply is self contained within the unit.
The rack-mountable RAN offers these same features as the existing RAN
product:
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 7029-6C3: (#8137)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8148) 1-way 1.2 GHz POWER4+ Processor Card, Express Configurations, Factory Only
Provides a 1-way processor card with 1.2 GHz POWER4+ processor and 8
MB of L3 cache for systems being included in Express Configurations.
Equivalent to #5220.
- Attributes provided: 1-way processor equivalent to #5220.
- Attributes required: 1 processor card slot.
- For 7029-6C3: (#8148)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8149) 2-way 1.2 GHz POWER4+ Processor Card, Express Configurations, Factor Only
Provides a 2-way processor card with 1.2 GHz POWER4+ processor and 8
MB of L3 cache for systems being included in Express Configurations.
Equivalent to #5222.
- Attributes provided: 2-way processor equivalent to #5222.
- Attributes required: 1 processor card slot.
- For 7029-6C3: (#8149)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8155) 4096MB (4x1024MB) DIMMs, Express Configurations, Factory Only
Provides 4096MB of system memory with 4 1024MB DIMMs for systems being
included in Express Configurations. Equivalent to #4445
- Attributes provided: 4096MB of system memory equivalent to #4445.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#8155)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Server 8 for iSeries and pSeries systems, or
later,
if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8156) 1024MB (4x256MB) DIMMs, Express Configurations, Factory Only
Provides 1024MB of system memory with 4 256MB DIMMs for systems being
included in Express Configurations. Equivalent to #4446
- Attributes provided: 1024MB of system memory equivalent to #4446.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#8156)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8157) 2048MB (4x512MB) DIMMs, Express Configurations, Factory Only
Provides 2048MB of system memory with 4 512MB DIMMs for systems being
included in Express Configurations. Equivalent to #4447
- Attributes provided: 2048MB of system memory equivalent to #4447.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#8157)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8158) 4096MB (4x1024MB) DIMMs, Express Configurations, Factory Only
(No Longer Available as of September 22, 2004)
Provides 4096MB of system memory with 4 1024MB DIMMs for systems being
included in Express Configurations. Equivalent to #4448
- Attributes provided: 4096MB of system memory equivalent to #4448.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#8158)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8159) 8192MB (4x2046MB) DIMMs, Express Configurations, Factory Only
Provides 8192MB of system memory with 4 2046MB DIMMs for systems being
included in Express Configurations. Equivalent to #4449.
- Attributes provided: 8192MB of system memory equivalent to #4449.
- Attributes required: Four empty memory DIMM positions.
- For 7029-6C3: (#8159)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8160) Feature Code Indicator for Express Configuration pSeries 615X (111C or 111E)
Linux Ready Express Configuration for the pSeries 615 Model 6C4/6E4.
Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8156 (1024MB memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8160)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8161) Feature Code Indicator for Express Configuration pSeries 615X (121C or 121E)
Linux Ready Express Configuration for the pSeries 625 Model 6C4/6E4.
Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8157 (2048MB memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8161)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8162) Feature Code Indicator For Express Congfiguration -- pSeries 615X (141C or 141E)
Linux Ready Express Configuration for the pSeries 615 Model 6C4/6E4.
Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8158 or 1 x #8155 (4096MB memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8162)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.1 or AIX 5.2, or later if installing
- AIX on the system. SUSE Linux Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8163) Feature Code Indicator for Express Configuration pSeries 615X (181C or 181E)
Linux Ready Express Configuration for the pSeries 615 Model 6C4/6E4.
Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8159 (8192 memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8163)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8164) Feature Code Indicator for Express Configuration pSeries 615X (221C or 221E)
Linux Ready Express Configuration for the pSeries 615 Model 6C4/6E4.
Consists of:
- 1 x #8149 (2-way 1.2 GHz POWER4+ processor)
- 1 x #8157 (2048MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8164)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8165) Feature Code Indicator For Express Congfiguration -- pSeries 615X (241C or 241E)
Linux Ready Express Configuration for the pSeries 615 Model 6C4/6E4.
Consists of:
- 1 x #8149 (2-way 1.2 GHz POWER4+ processor)
- 1 x #8158 or 1 x #8155 (4096MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8165)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.1 or AIX 5.2, or later if installing
- AIX on the system. SUSE Linux Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8166) Feature Code Indicator for Express Configuration pSeries 615X (281C or 281E)
Linux Ready Express Configuration for the pSeries 615 Model 6C4/6E4.
Consists of:
- 1 x #8149 (2-way 1.2 GHz POWER4+ processor)
- 1 x #8159 (8192MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8166)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8167) Feature Code Indicator for Express Configuration pSeries 615 (110C or 110E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8156 (1024MB memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8167)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8169) Feature Code Indicator for Express Configuration pSeries 615 (120C or 120E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8157 (2048MB memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8169)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8170) Feature Code Indicator For Express Configuration -- pSeries 615 (140C or 140E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8158 or 1 x #8155 (4096MB memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8170)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SUSE Linux Server 8 for iSeries and pSeries systems, or
later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8171) Feature Code Indicator for Express Configuration pSeries 615 (180C or 180E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8148 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8159 (8192 memory DIMMs)
- 1 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8171)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8172) Feature Code Indicator for Express Configuration pSeries 615 (220C or 220E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8149 (2-way 1.2 GHz POWER4+ processor)
- 1 x #8157 (2048MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8172)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8173) Feature Code Indicator For Express Configuration -- pSeries 615 (240C or 240E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8149 (2-way 1.2 GHz POWER4+ processor)
- 1 x #8158 or 1 x #8155 (4096MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8173)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SUSE Linux Server 8 for iSeries and pSeries systems, or
later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8175) Feature Code Indicator for Express Configuration pSeries 615 (280C or 280E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8149 (2-way 1.2 GHz POWER4+ processor)
- 1 x #8159 (8192MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8175)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8187) 2-way 1.45 GHz POWER4+ Processor Card, Express Configurations, Factory Only
Provides a 2-way processor card with 1.45 GHz POWER4+ processor and 8
MB of L3 cache for systems being included in Express Configurations.
Equivalent to #5234.
- Attributes provided: 2-way processor equivalent to #5234.
- Attributes required: 1 processor card slot.
- For 7029-6C3: (#8187)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8188) Feature Code Indicator for Express Configuration - pSeries 615(224C or 224E)
Express Configuration for the pSeries 615 Model 6C3/6E3. Consists of:
- 1 x #8187 (2-way 1.45 GHz POWER4+ processor)
- 1 x #8157 (2048MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8188)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Enterprise Server 8 for iSeries and pSeries Systems,
or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8189) Feature Code Indicator For Express Configuration -- pSeries 615 (244C or 244E)
Express Configuration for the pSeries 615 Model 6C4/6E4. Consists of:
- 1 x #8187 (2-way 1.45 GHz POWER4+ processor)
- 1 x #8158 or 1 x #8155 (4096MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8189)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SUSE Linux Server 8 for iSeries and pSeries systems, or
later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8190) Feature Code Indicator for Express Configuration - pSeries 615 (284C or 284E)
Express Configuration for the pSeries 615 Model 6C3/6E3. Consists of:
- 1 x #8187 (2-way 1.45 GHz POWER4+ processor)
- 1 x #8159 (8192MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8190)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Enterprise Server 8 for iSeries and pSeries Systems,
or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8191) Feature Code Indicator for Express Configuration - pSeries 615X (225C or 225E)
Linux Ready Express Configuration for the pSeries 615 Model 6C3/6E3.
Consists of:
- 1 x #8187 (2-way 1.45 GHz POWER4+ processor)
- 1 x #8157 (2048MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8191)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Enterprise Server 8 for iSeries and pSeries Systems,
or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8192) Feature Code Indicator For Express Configuration -- pSeries 615X (245C or 245E)
Linux Ready Express Configuration for the pSeries 615 Model 6C4/6E4.
Consists of:
- 1 x #8187 (2-way 1.45 GHz POWER4+ processor)
- 1 x #8158 or 1 x #8155 (4096MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8192)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.1 or AIX 5.2, or later if installing
- AIX on the system. SUSE Linux Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8193) Feature Code Indicator for Express Configuration - pSeries 615X (285C or 285E)
Linux Ready Express Configuration for the pSeries 615 Model 6C3/6E3.
Consists of:
- 1 x #8187 (2-way 1.45 GHz POWER4+ processor)
- 1 x #8159 (8192MB memory DIMMs)
- 2 x #3273 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#8193)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Enterprise Server 8 for iSeries and pSeries Systems,
or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8244) Audio PCI Adapter for Workstations
The Audio PCI Adapter for Workstations is a high performance
workstation class audio PCI adapter that is optimized for support in the
AIX professional workstation environment and their associated
applications. It is a 3.3 volt, 32 bit PCI adapter that runs at 33MHz
speed and complies with the Intel AC 1997 Version 2.1 Specifications.
The Audio PCI Adapter for Workstations provides external jacks for
headphones, speaker output, line input, and microphone input as well as
an internal connector for CD or DVD drive audio input.
- Attributes provided: One Audio PCI Adapter with internal and
external audio connectors.
- Attributes required: One available PCI slot
- For 7029-6C3: (#8244)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8700) Quiet Touch Keyboard - Business Black, US English, #103P
- Attributes provided: Quiet and soft-touch key depression,3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8700)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8701) Quiet Touch Keyboard - Business Black, French, #189
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8701)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8702) Quiet Touch Keyboard - Business Black, Italian, #142
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8702)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8703) Quiet Touch Keyboard - Business Black, German/Austrian, #129
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8704) Quiet Touch Keyboard - Business Black, UK English, #166
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8705) Quiet Touch Keyboard - Business Black, Spanish, #172
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8706) Quiet Touch Keyboard - Business Black, Japanese, #194
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8706)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8707) Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8708) Quiet Touch Keyboard - Business Black, Canadian French, #058
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8710) Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8710)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8711) Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8712) Quiet Touch Keyboard - Business Black, Danish, #159
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8713) Quiet Touch Keyboard - Business Black, Bulgarian, #442
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8713)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8714) Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8716) Quiet Touch Keyboard - Business Black, Norwegian, #155
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8718) Quiet Touch Keyboard - Business Black, Portuguese, #163
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8720) Quiet Touch Keyboard - Business Black, Hebrew, #212
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8721) Quiet Touch Keyboard - Business Black, Hungarian, #208
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8723) Quiet Touch Keyboard - Business Black, Polish, #214
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8723)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8725) Quiet Touch Keyboard - Business Black, Slovakian, #245
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8725)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8726) Quiet Touch Keyboard - Business Black, Czech, #243
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8726)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8727) Quiet Touch Keyboard - Business Black, Turkish, #179
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8727)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8729) Quiet Touch Keyboard - Business Black, LA Spanish, #171
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8729)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8730) Quiet Touch Keyboard - Business Black, Arabic, #238
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8730)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8733) Quiet Touch Keyboard - Business Black, Korean, #413
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8733)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8734) Quiet Touch Keyboard - Business Black, Chinese/US, #467
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8734)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8735) Quiet Touch Keyboard - Business Black, French Canadian, #445
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8735)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8736) Quiet Touch Keyboard - Business Black, Thailand, #191
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8736)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8738) Quiet Touch Keyboard - Business Black, Russian, #443
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8738)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8739) Quiet Touch Keyboard - Business Black, Croatian, #105
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8739)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8740) Quiet Touch Keyboard - Business Black, US English ISO9995, #103P
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7029-6C3: (#8740)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8741) 3-Button Mouse - Business Black
3-button dynamic tracking pointing device, utilizes opto-mechanical
technology, resolution is 320 DPI, 3-meter cable, Business Black color,
standard 6-pin mini-DIN connection.
- Attributes provided: Mouse capability
- Attributes required: Mouse port
- For 7029-6C3: (#8741)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9004) Southern Hemisphere Designator for Monitors
Specifies that southern hemisphere models are required for all
monitors on the initial plant order or on MES orders.
- Attributes provided: None
- Attributes required: Monitor
- For 7029-6C3: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7029-6C3: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9718) Language Group Specify - Turkish
Turkish language group for nomenclature and publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7029-6C3: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7029-6C3: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9721) Language Group Specify - Russian
Russian language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for nomenclature and standard
publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9724) Language Group Specify - Czech
Czech language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7029-6C3: (#9724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9800) Power Cord Specify - United States/Canada
The following countries/regions use the #9800 power cord to power the
system unit and/or peripheral features requiring a power cord.
- DOM U.S.
- 649 CANADA
- 832 SAUDI ARABIA
- 619 BAHAMAS
- 621 BARBADOS
- 627 BERMUDA
- 629 BOLIVIA
- 631 BRAZIL
- 661 COLOMBIA
- 663 COSTA RICA
- 681 DOMINICAN REPUBLIC
- 683 ECUADOR
- 829 EL SALVADOR
- 731 GUATEMALA
- 640 GUYANA
- 735 HONDURAS
- 759 JAMAICA
- 781 MEXICO
- 791 NETHERLANDS ANTILLES
- 811 PANAMA
- 843 SURINAM
- 859 TRINIDAD
- 871 VENEZUELA
- 760 JAPAN
- 761 JAPAN (PDS)
- 766 KOREA
- 818 PHILIPPINES
- 858 TAIWAN
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9802) Power Cord Specify - Brazil (125V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9802)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9820) Power Cord Specify - Belgium, Finland, France, Indonesia, Korea (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9820)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9821) Power Cord Specify - Denmark (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9821)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9825) Power Cord Specify - United Kingdom (250V, 13A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9825)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9827) Power Cord Specify - Israel (250V, 6-16A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9827)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9828) Power Cord Specify - Switzerland (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9828)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9830) Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9830)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9831) Power Cord Specify - Australia/New Zealand/Argentina (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9831)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9833) Power Cord Specify - Thailand (250V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9833)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9834) Power Cord Specify - Uruguay (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7029-6C3: (#9834)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9900) Power Cord (4M) Specify -- United States/Canada
The following countries/regions use the #9900 power cord to power the
system unit and/or peripheral features requiring a power cord.
- DOM U.S.
- 649 Canada
- 832 Saudi Arabia
- 619 Bahamas
- 621 Barbados
- 627 Bermuda
- 629 Bolivia
- 631 Brazil
- 661 Colombia
- 663 Costa Rica
- 681 Dominican Republic
- 683 Ecuador
- 829 El Salvador
- 731 Guatemala
- 640 Guyana
- 735 Honduras
- 759 Jamaica
- 760 Japan
- 761 Japan (PDS)
- 781 Mexico
- 791 Netherlands Antilles
- 811 Panama
- 843 Surinam
- 859 Trinidad
- 871 Venezuela
- 766 Korea
- 818 Philippines
- 858 Taiwan
- Attributes provided: Power Cord
- Attributes required: None
- For 7029-6C3: (#9900)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9901) Power Cord (4M) Specify - Belgium Finland, France (250V, 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9901)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9902) Power Cord (4M) Specify -- Denmark (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9902)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9903) Power Cord (4M) Specify -- U.K. and Others (250V, 13A)
- Attributes provided: Power Cord
- Attributes required: None
- For 7029-6C3: (#9903)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9904) Power Cord (4M) Specify -- Israel (250V, 6-16A)
- Attributes provided: Power Cord
- Attributes required: None
- For 7029-6C3: (#9904)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9905) Power Cord (4M) Specify -- Switzerland (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9905)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9906) Power Cord (4M) Specify - India, Pakistan, S. Africa (250V, 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9906)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9907) Power Cord (4M) Specify -- Italy (250V, 10A and 16A)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9907)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9908) Power Cord (4M) Specify - Australia/New Zealand/Argentina (250V, 10A)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9908)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9909) Power Cord (4M) Specify -- Thailand (250V, 15A)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9909)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9911) Power Cord (4M) Specify -- All (Standard rack power cord)
- Attributes provided: Power cord
- Attributes required: None
- For 7029-6C3: (#9911)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|
|
|