Summary of standard features:
- 1-, 2-and 4-way SMP design (One/two 1-way or one/two 2-way processor
cards)
- 1 GHz POWER4 or 1.2 or 1.45 POWER4+ 64-bit processor
- 32 MB of L3 cache per processor card
- 1 GB of ECC SDRAM memory:
- Four available hot-swap disk drive bays
- Two - media bays:
- Bay One - CD-ROM, DVD-ROM, or DVD-RAM
- Bay Two - DVDRAM, diskette or tape drive (optional)
- Four - PCI-x slots with 1.0 GHz processor systems, Six - PCI-X slots
with 1.2 and 1.45 GHz processor systems.
- Hot-swap, 64-bit, 133MHz, 3.3 V
- Integrated:
- Two - 10/100 Ethernet (IEEE 802.3 compliant)
- Two - Ultra3 SCSI controllers for internal DASD and one external port
(VHDCI AMP halfpitch 68-pin)
- Service processor
- Hot-swap fans
- Ports:
- Two Hardware Maintenance Consoles (HMCs)
- Keyboard
- Mouse
- One ac Power Supply:
- Redundant power supply optional
- Support for:
- 32-bit applications
- 64-bit applications
- AIX V5.1 or V5.2 or later, SuSE Linux Enterprise Server 8 for iSeries
or pSeries Systems, or later, or Red Hat Enterprise Linux Advanced Server
3 for pSeries, or later.
The minimum Model 6E4 or 6C4 configuration must include a processor,
memory, hard disk, power supply, and CD-ROM, DVD-ROM, or DVD-RAM, and
cables. The defaults, if no choice is made, are:
- Processor -- 1-way, 1.2 GHz (#5133)
- Memory -- 1 GB memory DIMM (#4451)
- Disk Drive -- 18.2 GB hard drive (#3157)
- AC Power Supply (#6273)
- IDE CD-ROM (#2633)
- Ultra3 SCSI Backplane (#6568) and cable (#4254)
A keyboard, mouse, graphics adapter, and monitor are available as
options.
HACMP Solution
For even greater availability and reliability, the Models 6E4 and 6C4
also support IBM High Availability Cluster Multiprocessing (HACMP). This
solution provides a superior base for high availability, an essential
ingredient of e-commerce.
IBM eServer pSeries 630 Model 6C4 and 6E4 Express
Configurations
Express Configuration (120C for Model 6C4, 120E for Model
6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries
(120C or 120E) (#8033)
- One - 1-way POWER4+ 1.2 GHz processor (#8106)
- One - 2048 MB Memory DIMMS (#8080)
- Two - 73.4 GB hot-swap disk drives (#3159)
- One - CD-ROM (#2633)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
- One - AIX V5.1 or V5.2, or later, license
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Linux Ready Express Configuration (121C for Model 6C4, 121E for
Model 6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630X
(121C or 121E) (#8034)
- One - 1-way POWER4+ 1.2 GHz processor (#8106)
- One - 2048 MB Memory DIMMS (#8080)
- Two - 73.4 GB hot-swap disk drives (#3159)
- One - CD-ROM (#2633)
- One - Diskette Drive (#2605)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered
Express Configuration (140C for Model 6C4, 140E for Model
6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630
(140C or 140E) (#8110)
- One - 1-way POWER4+ 1.45 GHz processor (#8108)
- One - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drives (#3159)
- One - CD-ROM (#2633)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Redundant cooling (#6557)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
- One - AIX V5.1 or V5.2, or later, license
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Linux Ready Express Configuration (141C for Model 6C4, 141E for
Model 6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630X
(141C or 141E) (#8111)
- One - 1-way POWER4+ 1.45 GHz processor (#8108)
- One - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drives (#3159)
- One - CD-ROM (#2633)
- One - Diskette Drive (#2605)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Redundant cooling (#6557)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Express Configuration (220C for Model 6C4, 220E for Model
6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630
(220C or 220E) (#8177)
- One - 2-way POWER4+ 1.2 GHz processor (#8107)
- Two - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
- One - AIX V5.1 or V5.2, or later, license
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Linux Ready Express Configuration (221C for Model 6C4, 221E for
Model 6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630X
(221C or 221E) (#8179)
- One - 2-way POWER4+ 1.2 GHz processor (#8107)
- Two - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Diskette Drive (#2605)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Express Configuration (222C for Model 6C4, 222E for Model
6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630
(222C or 222E) (#8035)
- Two - 1-way POWER4+ 1.2 GHz processor (#8106)
- Two - 2048 MB Memory DIMMS (#8080)
- Two - 73.4 GB hot-swap disk drives (#3159)
- One - CD-ROM (#2633)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
- One - AIX V5.1 or V5.2, or later, license
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Linux Ready Express Configuration (223C for Model 6C4, 223E for
Model 6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630X
(223C or 223E) (#8036)
- Two - 1-way POWER4+ 1.2 GHz processor (#8106)
- Two - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Diskette Drive (#2605)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Express Configuration (240C for Model 6C4, 240E for Model
6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630
(240C or 240E) (#8112)
- One - 2-way POWER4+ 1.45 GHz processor (#8109)
- Two - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Redundant cooling (#6557)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
- One - AIX V5.1 or V5.2, or later, license
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Linux Ready Express Configuration (241C for Model 6C4, 241E for
Model 6E4)
- One - 7028-6C4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630X
(241C or 241E) (#8113)
- One - 2-way POWER4 1.45 GHz processor (#8109)
- Two - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Diskette Drive (#2605)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Redundant cooling (#6557)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Express Configuration 402E
- One - 7028-6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries
- 630 (402E) (#8016)
- Two - 2-Way POWER4 1.0 GHz Processor (#8084)
- Four - 4096 MB Memory DIMMS (#8079)
- One - 36.4 GB Hot-Swap Disk Drive (#3158)
- One - CD-ROM (#2633)
- One - GXT135P Graphics Accelerator (#2849)
- One - T541H 15" T541H/L150p 15" TFT Color Monitors, Business Black,
Captured Cable (#3637)
- One - Keyboard (#87xx)
- Three - 4-port 10/100 Mbps Ethernet Adapter (#4961)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#98xx)
- One - AIX V5.1 or V5.2, or later, license
Notes:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Express Configuration (420C for Model 6C4, 420E for Model
6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630
(420C or 420E) (#8037)
- Two - 2-way POWER4+ 1.2 GHz processor (#8107)
- Four - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
- One - AIX V5.1 or V5.2, or later, license
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Linux Ready Express Configuration (421C for Model 6C4, 421E for
Model 6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630X
(421C or 421E) (#8038)
- Two - 2-way POWER4+ 1.2 GHz processor (#8107)
- Four - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Diskette Drive (#2605)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Express Configuration (440C for Model 6C4, 440E for Model
6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630
(440C or 440E) (#8114)
- Two - 2-way POWER4+ 1.45 GHz processor (#8109)
- Four - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - RIO-2 ports indicator (#9581)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Redundant cooling (#6557)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
- One - AIX V5.1 or V5.2, or later, license
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Linux Ready Express Configuration (441C for Model 6C4, 441E for
Model 6E4)
- One - 7028-6C4/6E4, including a minimum of:
- One - feature number indicator for Express Configuration pSeries 630X
(441C or 441E) (#8115)
- Two - 2-way POWER4+ 1.45 GHz processor (#8109)
- Four - 2048 MB memory DIMMs (#8080)
- Two - 73.4 GB hot-swap disk drive (#3159)
- One - CD-ROM (#2633)
- One - Diskette Drive (#2605)
- One - Ultra3 SCSI Backplane for hot-swap disk (#6568)
- One - SCSI backplane cable (#4254)
- One - 6-slot riser indicator (#9556)
- One - AC Power specify (#9172)
- One - AC Power supply (#6273)
- One - Redundant cooling (#6557)
- One - Language group specify - (#9xxx)
- One - Power cord specify - (#99xx (6C4 only) / #98xx)
Note:
- 8xxx Feature Numbers are mandatory
- Additional, optional 7028-6C4/6E4 features may be added as desired
- Upgrades may be made to the minimum configurations, other than
processors and memory
- Minimum configuration may change depending on features ordered.
Reliability, Availability, and Serviceability (RAS)
Reliability, Fault Tolerance, and Data Integrity
Excellent quality and reliability features are the keys to all facets
of IBM eServer pSeries products. The measures taken help ensure the
products operate when required, perform reliably, efficiently handle
infrequent failures in a nondisruptive fashion, and provide timely and
competent repair to allow resumption of operations with minimal
inconvenience.
Reliability begins with the development of architectures, where RAS
innovations are of paramount importance. The reliability concept flows
through design and product development stages, where RAS designs are
reviewed, assessed, developed, evaluated, and optimized. It continues
through the manufacturing and release processes, where the manufacturing
quality is extensively measured and is under continual evaluation. It
culminates in service and support, where:
- Reliability is consistently monitored for deviation from the
criteria.
- Warranty and maintenance have high priority.
- Significant customer problems are assigned to and addressed by an
expert team.
IBM eServer pSeries 630 system processes, from the architectural and
concept phases of development through the provision of service and
support, are ISO certified and audited periodically for ISO compliance by
representatives of Underwriters Laboratories.
RAS features such as ECC (error checking and correcting) on the L1
data cache and L2 data and directory caches can provide dynamic detection
and correction of hard or soft array cell failures. Dynamic de-
allocation functions include:
- L3 cache line delete and L2 cache de-allocation
- Individual L3 cache memory bypass
- CPU de-allocation
Disk mirroring and disk controller duplexing capability are also
provided by the AIX operating system.
The Journaled File System of the AIX operating system maintains file
system consistency and reduces the likelihood of data loss when the
system is abnormally halted due to a power failure.
First-Failure Data Capture
- Concurrent run-time diagnostics based on First-Failure Data Capture,
providing the ability to correctly diagnose problems in a computer, is
the bedrock capability upon which availability is based. The Models 6E4
and 6C4 provide state of the art capability in IPL and initialization
diagnostics, based on internal test procedures and in run-time first-
failure diagnostics.
PCI Extended Error Handling (EEH)
- In the past, PCI Bus Parity errors caused a global machine check
interrupt, which eventually required a system reboot to continue. In the
Model 6E4 and 6C4 systems, new I/O drawer hardware, system firmware, and
AIX interaction has been designed to allow transparent recovery of
intermittent PCI bus parity errors, and graceful transition to the I/O
device available state in the case of a permanent parity error in the PCI
bus. This mechanism is called the PCI Extended Error Handling (EEH).
EEH enabled adapters respond to a special data packet generated from the
affected PCI slot hardware by calling system firmware, which will examine
the affected bus, allow the device driver to reset it, and continue
without a system reboot.
Dynamic Processor Deallocation
- On Model 6E4 and 6C4 4-way systems, predictive failure analysis is
performed on recoverable processor errors during run-time. If a
processor exceeds a threshold of recoverable errors such as on an L3
cache access, the event is logged and the processor will be marked and
deconfigured from the system while the operating system continues to run.
This feature allows the processor to be repaired on a deferred basis
while helping to prevent an unscheduled system outage.
Note: Dynamic Processor Deallocation is effective on systems with two or
more functional processors and with AIX 5L Version 5.2. AIX 5L Version
5.1 requires three or more functional processors in order to have the
feature running properly.
Memory Error Correction Extensions
- The standard memory card has single error-correct and double-error
detect ECC circuitry to correct single-bit memory failures. The double-
bit detection helps maintain data integrity by detecting and reporting
multiple errors beyond what the ECC circuitry can correct. The memory
chips are organized such that the failure of any specific memory module
only affects a single bit within an ECC word (bit scattering) thus
allowing for error correction and continued operation in the presence of
a complete chip failure (Chipkill recovery).
- Memory card also utilizes memory scrubbing and thresholding to
determine when spare memory modules (if available) within each bank of
memory should be used to replace ones that have exceeded their threshold
value (dynamic bit steering).
Redundancy for Array Self-healing
- While the most likely failure event in a processor is a soft single
bit error in one of its caches, there are other events which can occur,
and which need to be distinguished from one another. For the L1, L2, L3
caches and their directories, hardware and firmware keeps track of
whether permanent errors are being corrected beyond a threshold. If
exceeded, a deferred repair error log is created. Additional run-time
availability actions, such as CPU vary off, or L3 cache line delete, are
also initiated. L1, L2 caches and L2, L3 directories on the POWER4 chip
are manufactured with spare bits in their arrays which can be accessed
via programmable steering logic to replace faulty bits in the respective
arrays. This is analogous to the redundant bit steering employed in main
store as a mechanism to avoid physical repair that is also implemented in
POWER4 systems. The steering logic is activated during processor
initialization and is initiated by the Built-in System Test (BIST) at
Power On time. L3 cache redundancy is implemented at the cache line
granularity level. Exceeding correctable error thresholds while running
causes invocation of a dynamic L3 cache line delete function, capable of
up to 2 deletes per cache. In the rare event of solid bit errors
exceeding this quantity, the cache continues to run, but a message
calling for deferred repair is issued. If the system is rebooted without
such repair, the L3 cache is placed in bypass mode, and the system comes
up with this cache deconfigured.
Service Processor
- A Service Processor included in the Models 6E4 and 6C4 gives you an
immediate means to diagnose, check status, and sense operational
conditions of a remote system, even when the main processor is
inoperable.
- The Service Processor enables firmware and operating system
surveillance, several remote power controls, environmental monitoring,
reset, and boot features along with remote maintenance and diagnostic
activities, including console mirroring. The Service Processor can place
calls to report surveillance failures, critical environmental faults, and
critical processing faults.
Fault Monitoring Functions
- BIST (Built-in self-test) and POST (Power-on self-test) check
processor, L2 cache, memory, and associated hardware required for proper
booting of the operating system, every time the system is powered on. If
a non-critical error is detected or if the errors occur in the resources
that can be removed from the system configuration, the booting process is
designed to proceed to completion. The errors are logged in the system
non-volatile RAM (NVRAM).
- Disk drive fault tracking can alert the system administrator of an
impending disk failure before it impacts customer operation.
- AIX log facility (where hardware and software failures are recorded
and analyzed by Error Log Analysis (ELA) routine) gives a warning to the
system administrator on the causes of system problems. This also enables
IBM service representatives to bring along probable replacement hardware
components when a service call is placed, thus minimizing system repair
time.
- PCI hot-swap slot fault tracking helps prevent slot errors from
causing a system machine check interrupt and subsequent reboot. This
provides superior fault isolation and the error affects only the single
adapter. Repair time is reduced because isolation is to the specific
adapter and PCI hot-swap allows concurrent repair of that card without
affecting other adapters.
Mutual Surveillance
- The Service Processor can monitor the operation of the firmware
during the boot process, and it can monitor the operating system for loss
of control. It also allows the operating system to monitor for Service
Processor activity. The Service Processor can take appropriate action,
including calling for service, when it detects the firmware or the
operating system has lost control. Likewise, the operating system can
request a Service Processor repair action if necessary.
Environmental Monitoring Functions
- Temperature monitoring -- increases the fan speed rotation when
ambient temperature is above the normal operating range.
- Temperature monitoring -- warns the system administrator of potential
environmental related problems (for example, air conditioning and air
circulation around the system) so that appropriate corrective actions can
be taken before a critical failure threshold is reached, and to control
an orderly system shutdown when operating temperature exceeds the
critical level.
- Fan speed monitoring -- activates a warning and an orderly system
shutdown when the speed is out of operational specification.
- Voltage monitoring -- activates a warning and an orderly system
shutdown when the voltages are out of operational specification.
Error Handling and Reporting
Availability Enhancement Functions
- On-line (Concurrent) Diagnostics with ELA and Service Aids allows
administrators or IBM service representatives to diagnose potential
system malfunctions without interrupting end-user operation.
- The auto-restart (reboot) option, when enabled, can reboot the system
automatically following an unrecoverable software error, software hang,
hardware failure, or environmentally-induced (ac power) failure.
Serviceability
Electronic Service Agent
- Available at no additional charge. When installed on the pSeries,
the Electronic Service Agent can enhance IBM's ability to offer the
system with maintenance service.
- Monitors and analyzes system errors, and if needed, can place a
service call automatically to IBM without customer intervention.
- Can reduce the effect of business disruptions due to unplanned system
outages and failures.
- Performs problem analysis on a subset of hardware-related problems
and, with customer authorization, can report automatically the results to
IBM Service.
Online Customer Support (OCS)
- OCS for hardware problem reporting may be performed via remote login
by pSeries specialists using normal AIX facilities. The Electronic
Service Agent software can also be used for this capability.
- AIX Support offerings will be under AIXSERV and Electronic Service
Agent.
Back to top
Product Positioning
|
The IBM eServer pSeries 630 Models 6E4 and 6C4 are UNIX servers for
customers looking for a cost-effective, high-performance UNIX server.
These are customers who are attracted to the p660 but do not require the
overall performance or scaling.
The Model 6C4 is an ideal replacement for the current successful Model
B80. The Model 6E4 is an ideal replacement for the Model 270. Both
systems use the POWER4 or POWER4+ technology, have four hot-swap PCI-X
slots with the 1.0 GHz processor or six hot-swap PCI-X slots with the 1.2
or 1.45 GHz processors, four front accessible hot-swap disk bays, and can
accommodate up to 32 GB of ECC memory. Two media bays are available for
a CD-ROM, DVD-ROM, DVDRAM, diskette, or tape drive. Integrated features
include two 10/100 Ethernet ports, two Ultra3 SCSI (internal and
external) ports, three serial, one parallel, two HMC, keyboard, and mouse
ports.
Reliability improvements help make the Models 6E4 and 6C4 very
competitive. Its CPU de-allocation function enables the system to detect
failing processors and take them off-line without re-booting the system.
The service processor can record this action and notify the system
administrator or service personnel of the condition. Computing operation
continues with the processor deactivated, allowing repair to be scheduled
at a time convenient to your processing schedule. Hot-plug functionality
of the PCI I/O subsystem is designed to bring new levels of up-time to
your system for the replacement or addition of I/O adapters. Selective
disablement of an adapter can be made as necessary while system
operations not dependent on this adapter continue to run without being
affected.
High availability continues to be an ongoing and growing need for
customers. IBM continues its tradition of providing high-availability
solutions with the Models 6E4 and 6C4, which can be ordered in a high-
availability configuration with a choice of components.
Back to top
Model
|
Model Summary Matrix
Model |
Processor Type |
Clock Rate |
System Memory |
Internal Storage |
Slots/Bays |
Type |
6E4 |
POWER4 |
1.0 GHz |
512 MB/32 GB |
18.2 GB/587.2 GB |
4/6 |
Deskside/Desktop |
6E4 |
POWER4+ |
1.2 GHz |
512 MB/32 GB |
18.2 GB/587.2 GB |
6/6 |
Deskside/Desktop |
6E4 |
POWER4+ |
1.45 GHz |
512 MB/32 GB |
18.2 GB/587.2 GB |
6/6 |
Deskside/Desktop |
Customer Setup (CSU)
Yes.
Devices Supported
The following external machine types are supported on the indicated
models for MT 7028.
This list is not all inclusive. Many devices are supported through
standard ports. Please refer to the sales manual of the external machine
type and the list of supported devices in the appropriate section of the
AIX sales manual for further attach support information.
|6| X = SUPPORTED DEVICE
|E|
|4|
MT-MOD | | DESCRIPTION
---------|-|-----------------------------------------
---------+-+--------SWITCH---------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2031-016 |X| McDATA Model 016 Departmental ES-3032 Fabric Switch
2031-032 |X| McDATA Model 032 Departmental ES-3032 Fabric Switch
2031-216 |X| McData ES-3216 Fabric Switch
2031-224 |X| McData IBM 2031 Model 224 Fabric Switch
2031-232 |X| McData ES-3232 Fabric Switch
2031-L00 |X| McDATA Model L00 ES-1000 Loop Switch
2032-001 |X| McDATA ED-5000 Enterprise Fibre Channel Switch
2032-064 |X| McDATA Model 064 Enterprise Fibre Channel Director
2032-140 |X| 2032 McDATA Intrepid 6140 Enterprise Fibre Channel
| | Director Model 140
2032-C40 |X| Cabinet for McDATA Intrepid 6064 Enterprise Fibre
| | Channel Director
2034-212 |X| McData Spheron 4300 Entry Level Fabric Switch
2042-001 |X| Inrange FC/9000 64-port Fibre Channel Director
2042-128 |X| Inrange FC/9000 128-port Fibre Channel Director
2042-256 |X| INRANGE FC/9000-256 FC Director
2061-020 |X| Cisco Systems MDS 9120 Fabric Switch (IBM Resell)
2061-040 |X| Cisco Systems MDS 9140 Fabric Switch (IBM Resell)
2062-D01 |X| Cisco MDS-9216 Multilayer Fabric Switch
2062-D07 |X| Cisco MDS 9509 Multilayer Director Switch (Data
| | Center Model)
2062-T07 |X| Cisco 9509 Multilayer Director Switch (Telecom
| | Model - DC Power)
2109-F16 |X| IBM TotalStorage SAN Switch Model M16
2109-F32 |X| TotalStorage SAN Switch - 2109 Model F32
2109-M12 |X| IBM TotalStorage SAN Switch Model M12
2109-M14 |X| IBM TotalStorage SAN Switch Model M14
2109-S08 |X| IBM SAN Fibre Channel Switch Model S08
2109-S16 |X| IBM SAN Fibre Channel Switch Model S16
3534-F08 |X| IBM TotalStorage Storage Area Network (SAN) Model F08
| |
---------+-+--------DISK-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
1722-60U |X| FAStT600 Storage Server
1740-1RU |X| TotalStorage FAStT EXP700 Storage Expansion Unit
1742-1RU |X| TotalStorage FAStT700 Storage Server
1742-90U |X| FAStT900 Storage Server
2102-D00 |X| IBM Expandable Storage Unit
2102-F10 |X| IBM Fibre Channel Raid Storage Server
2104-DL1 |X| IBM Expandable Storage Plus Model DL1
2104-DU3 |X| Expandable Storage Plus Model DU3
2104-TL1 |X| IBM Expandable Storage Plus Model TL1
2104-TS4 |X| IBM TotalStorage Expandable Storage Plus U320
| | Model TS4
2104-TU3 |X| Expandable Storage Plus Model TU3
2105-800 |X| Totalstorage Enterprise Storage Server Model 800
2105-E10 |X| IBM Enterprise Storage Server Model E10
2105-E20 |X| IBM Enterprise Storage Server Model E20
2105-F10 |X| IBM Enterprise Storage Server Model F10
2105-F20 |X| IBM Enterprise Storage Server Model F20
3542-2RU |X| IBM FAStT200 Storage Server Model 2RU
3542-2RX |X| IBM Fast T200 Storage Server Model 2RX
3552-1RU |X| IBM TotalStorage FAStT500 Storage Server
3552-1RX |X| IBM Totalstorage FastT200 Storage Storage Server
| | Model 1RZ (EMEA)
3560-1RU |X| IBM TotalStorage FAStT EXP500 Storage Expansion Unit
3560-1RX |X| IBM Totalstorage FastT EXP500 Storage Expansion
| | Unit (EMEA)
7131-105 |X| IBM Multi-Storage Tower Model 105
7131-405 |X| IBM Multi-Storage Tower Model 405
7133-010 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem
| | Model 010
7133-020 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem
| | Model 020
7133-500 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem
| | Model 500
7133-600 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem
| | Model 600
7133-D40 |X| IBM Serial Disk System Advanced Model D40
7133-T40 |X| IBM Serial Disk System Advanced Model T40
7137-412 |X| IBM Disk Array Subsystem Model 412
7137-413 |X| IBM Disk Array Subsystem Model 413
7137-414 |X| IBM Disk Array Subsystem Model 414
7137-415 |X| IBM Disk Array Subsystem Model 415
7203-001 |X| IBM RS/6000 External Portable Disk Drive Model 001
7204-010 |X| 1 GB Disk Drive
7204-112 |X| 1.1 GB Fast/Wide Disk Drive
7204-113 |X| IBM RS/6000 External Disk Drive Model 113
7204-114 |X| IBM RS/6000 External Disk Drive Model 114
7204-118 |X| IBM 7204 18.2 GB External Disk Drive Model 118
7204-139 |X| IBM RS/6000 External Disk Drive Model 139
7204-215 |X| 2 GB Differential Disk Drive
7204-315 |X| IBM RS/6000 External Disk Drive Model 315
7204-317 |X| IBM RS/6000 External Disk Drive Model 317
7204-325 |X| IBM RS/6000 External Disk Drive Model 325
7204-339 |X| IBM RS/6000 External Disk Drive Model 339
7204-402 |X| IBM External Disk Drive Model 402
7204-404 |X| IBM External Disk Drive Model 404
7204-409 |X| IBM 9.1 GB External Disk Drive Model 409
7204-418 |X| IBM 7204-418 18GB DE External Disk Drive
7204-419 |X| IBM 18.2 GB External Disk Drive Model 419
7204-518 |X| IBM 7204 Model 518 18.3 GB External Disk Drive
7204-536 |X| IBM 7204 Model 536 36.7 GB External Disk Drive
7204-573 |X| IBM 7204 External Disk Drive Model 573
| |
---------+---+--------GRAPHICS RELATED-----------------
- - - - -|-|-|- - - - - - - - - - - - - - - - - - - - -
6093-011 |X| CursorPad Tablet
6093-012 |X| Large Tablet
6093-021 |X| IBM Tablet Model 021
6094-010 |X| Dials
6094-020 |X| LPF Keyboard
6094-030 |X| Spaceball
6094-031 |X| Spaceball
6094-040 |X| Spaceball
6094-600 |X| Magellan Enhanced Input Device
7250-002 |X| POWER GXT1000 Graphics Accelerator
| |
---------+-+--------DISPLAYS-------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
6546-00E |X| G52 Display
6546-00N |X| G52 Display
6546-01E |X| G52 Display
6546-01S |X| G52 Display
6546-0AE |X| G54 Display
6546-0AN |X| G54 Display
6546-0BE |X| G54 Display
6546-0BN |X| G54 Display
6546-0BS |X| G54 Display
6546-21N |X| G52 Display
6546-2BN |X| G54 Display
6546-31N |X| G52 Display
6546-4AN |X| G54 Display
6546-6BN |X| G54 Display
6555-763 |X| P70 17" COLOR DISPLAY
6555-764 |X| P70 17" COLOR DISPLAY
6555-773 |X| P200 UV-N COLOR MONITOR
6555-774 |X| P200 UV-N COLOR MONITOR
6555-803 |X| P201 UV-N COLOR MONITOR
7315-C01 |X| IBM 7315 Model C01 Hardware Management Console
7315-C02 |X| IBM 7315 Model C02 Hardware Management Console
7315-CR2 |X| IBM 7315 Model CR2 Hardware Management Console
7316-TF1 |X| IBM 7316-TF1 Rack Mounted Flat Panel Display
9513-AG2 |X| IBM T55A 15" TFT LCD COLOR MONITO
9513-AW1 |X| IBM T55A 15" TFT LCD COLOR MONITOR
9516-B03 |X| 16.1" TFT LCD DISPLAY
9516-B04 |X| 16.1" TFT LCD DISPLAY
| |
---------+-+--------STORAGE NETWORK DEVICES----------
1710-10U |X| IBM 1710 TotalStorage FAStT EXP100 Storage
| | Expansion Unit
1724-100 |X| IBM TotalStorage FAStT100 Storage Server
2061-PA1 |X| Cisco Port Analyzer Adapter
2061-PA2 |X| Cisco MDS 9000 Port Analyzer Adapter, Enhanced
2105-750 |X| IBM TotalStorage Enterprise Storage Server
| | Model 750
2145-4F2 |X| IBM TotalStorage SAN Volume Controller Storage
| | Engine
2146-V1A |X| IBM TotalStorage 2146 SAN Integration Server
5194-25T |X| TotalStorage NAS 200 Model 25T
5196-G02 |X| TotalStorage NAS 300 Model G02
5196-G27 |X| TotalStorage NAS 300 Model G27
| |
- - - - -|-|- - - - BUS CONVERTER - - - - - - - - - -
2108-G07 |X| IBM Storage Area Network Data Gateway Model G07
- - - - -|-|- - - - ROUTER- - - - - - - - - - - - - -
2108-R03 |X| IBM Storage Area Network Data Gateway Model R03
| |
---------+-+--------SCSI DEVICES---------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2005-H08 |X| IBM TotalStorage SAN Switch H08
2005-H16 |X| IBM TotalStorage SAN Switch H16
2104-DS4 |X| Expandable Storage Plus U320 Model DS4
3995-C60 |X| IBM Optical Library Dataserver
3995-C62 |X| IBM Optical Library Dataserver
3995-C64 |X| IBM Optical Library Dataserver
3995-C66 |X| IBM Optical Library Dataserver
3995-C68 |X| IBM Optical Library Dataserver
7209-002 |X| IBM Optical Disk Drive Model 002
7209-003 |X| IBM Multifunction Optical Disk Drive Model 003
7210-005 |X| IBM External CD-ROM Drive Model 005
7210-010 |X| IBM External CD-ROM Drive Model 010
7210-015 |X| IBM CR-ROM Model 015
7210-020 |X| IBM CR-ROM Model 020
7210-025 |X| 4.7GB DVDRAM Drive
7212-102 |X| STORAGE DEVICE ENCLOSURE (SAM BASS)
| |
---------+-+--------TAPE-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3490-F00 |X| IBM Magnetic Tape Subsystem Model F00
3490-F01 |X| IBM Magnetic Tape Subsystem Model F01
3490-F11 |X| IBM Magnetic Tape Subsystem Model F11
3494-B10 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B10
3494-B18 |X| IBM Magstar Virtual Tape Server Model B18
3494-B20 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B20
3494-D12 |X| IBM Magstar Tape Library Model D12
3494-D22 |X| IBM TotalStorage Enterprise Automated Tape Library
| | 3494-D22
3494-D24 |X| IBM TotalStorage Enterprise Automated Tape Library
| | 3494-D24
3494-L12 |X| IBM Magstar Tape Library Model L12
3494-L22 |X| IBM TotalStorage Enterprise Automated Tape Library
| | 3494-L22
3570-B00 |X| IBM Magstar MP Tape Subsystem Model B00
3570-B01 |X| IBM Magstar MP Tape Subsystem Model B01
3570-B02 |X| IBM Magstar MP Tape Subsystem Model B02
3570-B11 |X| IBM Magstar MP Tape Subsystem Model B11
3570-B12 |X| IBM Magstar MP Tape Subsystem Model B12
3570-B1A |X| IBM Magstar MP Tape Drive Model B1A
3570-C00 |X| IBM Magstar MP Tape Drive Model C00
3570-C01 |X| IBM Magstar MP Tape Drive Model C01
3570-C02 |X| IBM Magstar MP Tape Drive Model C02
3570-C11 |X| IBM Magstar MP Tape Drive Model C11
3570-C12 |X| IBM Magstar MP Tape Drive Model C12
3575-L06 |X| IBM Magstar MP Tape Library Dataserver Model L06
3575-L12 |X| IBM Magstar MP Tape Library Dataserver Model L12
3575-L18 |X| IBM Magstar MP Tape Library Dataserver Model L18
3575-L24 |X| IBM Magstar MP Tape Library Dataserver Model L24
3575-L32 |X| IBM Magstar MP Tape Library Dataserver Model L32
3580-H11 |X| Linear Tape Open (LTO) Bridge Box (HVD)
3580-H13 |X| LTO Ultrium Tape Drive
3580-H23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3580-L11 |X| Linear Tape Open (LTO) Bridge Box (LVD)
3580-L13 |X| LTO Ultrium Tape Drive
3580-L23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3581-H13 |X| LTO Ultrium Tape Autoloader
3581-H17 |X| Linear Tape Open (LTO) Autoloader (HVD)
3581-L13 |X| LTO Ultrium Tape Autoloader
3581-L17 |X| Linear Tape Open (LTO) Autoloader (LVD)
3581-H23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3581-L23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3583-L18 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L36 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L72 |X| Linear Tape Open (LTO) Tape Library - Scalable
3584-D22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D22 Expansion Frame
3584-D32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Base
| | Frame
3584-D42 |X| IBM UltraScalable Tape Library Model D42
3584-D52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D52 Expansion Frame
3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1
3584-L22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L22 Base Frame
3584-L32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library -
| | Expansion Frame
3584-L52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L52 Base Frame
3590-A60 |X| Tape Controller
3590-B11 |X| IBM Magstar Tape Subsystem Model B11
3590-B1A |X| IBM Magstar Tape Subsystem Model B1A
3590-C12 |X| IBM Magstar Silo Compatible Frame Model C1A
3590-E11 |X| Magstar Tape Subsystem
3590-E1A |X| Magstar Tape Subsystem
3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11
3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A
3592-C20 |X| IBM TotalStorage SILO Compatible Tape Drive Frame
| | Model C20
3592-J1A |X| IBM TotalStorage Enterprise Tape Drive 3592 Model J1A
7205-311 |X| IBM 35 GB External Digital Linear Tape Drive Model 311
7205-440 |X| IBM 7205 Model 440 40 GB External Digital Linear Tape
| | Drive
7205-550 |X| External Digital Linear Tape Drive
7206-005 |X| IBM External 4MM Tape Drive Model 005
7206-110 |X| IBM 12GB External 4MM DDS-3 Tape Drive Model 110
7206-220 |X| IBM 20GB External 4MM DDS-4 Tape Drive Model 220
7206-336 |X| External 36 GB 4MM DDS Gen5 Tape Drive
7206-VX2 |X| 7206-VX2 External Tape Drive
7207-011 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive
| | Model 011
7207-012 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive
| | Model 012
7207-122 |X| IBM 4GB External SLR5 QIC Tape Drive Model 122
7207-315 |X| IBM RS/6000 13GB 1/4-inch Tape Drive Model 315
7207-330 |X| 7207-330 IBM Tape Drive
7208-011 |X| IBM External 8MM Tape Drive Model 011
7208-341 |X| IBM 20GB External 8MM Tape Drive Model 341
7208-345 |X| IBM 7208 Model 345 60GB External 8MM Tape Drive
7210-030 |X| IBM DVD-RAM Drive Model 030
7212-312 |X| 1U Autoloader VXA-2 Tape Drive
7331-205 |X| IBM 8MM Tape Library Model 205
7331-305 |X| IBM 8MM Tape Library Model 305
7332-005 |X| IBM 4MM DDS-2 Tape Autoloader Model 005
7332-110 |X| IBM 4MM DDS-3 Tape Cartridge Autoloader Model 110
7332-220 |X| IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220
7334-410 |X| IBM 7334 Model 410 8MM Tape Library (MAM2 4x30)
7336-205 |X| IBM 4MM Tape Library Model 205
7337-305 |X| IBM Digital Linear Tape Library Model 305
7337-306 |X| IBM Digital Linear Tape Library Model 306
7337-360 |X| IBM 7337 Digital Linear Tape Library Model 360
9348-012 |X| IBM Magnetic Tape Unit Model 012
| |
---------+-+--------EXPANSION CABINETS---------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2032-C36 |X| McDATA Model 0C3 FC-512 Cabinet for McDATA Directors
| | and Fabric Switch
2042-C40 |X| Inrange 40U Cabinet
2109-C36 |X| IBM TotalStorage San Cabinet C36
7014-S00 |X| 1.6 Meter System Rack - 32U
7014-T00 |X| 1.8 Meter System Rack - 36U
7014-T42 |X| 2.0 Meter System Rack - 42U
| |
---------+-+--------SERVICES-------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
0463-001 |X| Software Customization (CCS)
0463-002 |X| Center for Customized Solutions (CCS)
The following feature availability matrix for MT 7028 uses the letter
"A" to indicate features that are available and orderable on the
specified models. "S" indicates a feature that is supported on the new
model during a model conversion; these features will work on the new
model, but additional quantities of these features cannot be ordered on
the new model; they can only be removed. "N" indicates that the feature
is not supported on the new model and must be removed during the model
conversion. As additional features are announced, supported, or
withdrawn, this list will be updated. Please check with your Marketing
Representative for additional information.
|6| A = AVAILABLE S = SUPPORTED
|E| N = NOT SUPPORTED, MUST BE REMOVED
|4|
FEAT/PN | | DESCRIPTION
--------|-|---------------------------------------------------------
0986 |A| CCS Customer Service Specify (US)
1736 |S| Expedited Delivery Service Indicator (US only)
1820 |A| PCI-X Dual-port 4x IB HCA
1835 |A| 3 meter 4x IB Cable
1836 |A| 8 meter 4x IB Cable
1839 |A| 1.5 meter 4x IB Cable
2114 |A| PCI SCSI Adapter 16-Bit Differential External Y Cable
2118 |A| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
2424 |S| 0.6M 16-bit SCSI-2 System to System Cable
2425 |A| 2.5M 16-bit SCSI-2 System to System Cable
2456 |A| LC-SC Fibre Channel Converter Cable
2459 |A| LC-SC 62.5-Micron Fiber Converter Cable
2498 |S| PCI 4-Channel Ultra3 SCSI RAID Adapter
2605 |S| Diskette Drive (Black bezel)
2623 |S| 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
2633 |S| IDE CD-ROM Drive (Black bezel)
2634 |S| 16X/48X(max) IDE DVD-ROM Drive
2709 |S| ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
2710 |S| ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
2732 |S| IBM Short-wave Serial HIPPI PCI Adapter for RS/6000
2733 |S| IBM Long-wave Serial HIPPI PCI Adapter for RS/6000
2737 |S| Keyboard/Mouse Attachment Card - PCI
2741 |A| SysKonnect SK-NET FDDI-LP SAS PCI
2742 |A| SysKonnect SK-NET FDDI-LP DAS PCI
2842 |A| POWER GXT4500P Graphics Accelerator
2843 |A| POWER GXT6500P Graphics Accelerator
2848 |S| POWER GXT135P Graphics Accelerator
2849 |A| POWER GXT135P Graphics Accelerator with Digital Support
2861 |A| ARTIC960Hx 4-Port EIA-232 Cable
2863 |A| ARTIC960Hx 4-Port X.21 Cable
2864 |A| ARTIC960Hx 4-Port V.35 (DTE) Cable
2871 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
2872 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
2873 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
| | Cable
2874 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
| | Extension Cable
2877 |A| IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
2934 |A| Asynchronous Terminal/Printer Cable EIA-232
2936 |A| Asynchronous Cable EIA-232/V.24
2943 |A| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944 |S| 128-Port Asynchronous Controller, PCI bus
2946 |S| Turboways 622 Mbps PCI MMF ATM Adapter
2947 |A| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
2951 |S| Cable, V.24 / EIA-232
2952 |S| Cable, V.35
2953 |S| Cable, V.36 / EIA-499
2954 |S| Cable, X.21
2962 |S| 2-Port Multiprotocol PCI Adapter
2969 |S| Gigabit Ethernet - SX PCI Adapter
2975 |S| 10/100/1000 Base-T Ethernet PCI Adapter
3124 |A| Serial to Serial Port Cable for Drawer/Drawer
3125 |A| Serial to Serial Port Cable for Rack/Rack
3157 |S| 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
3158 |N| 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
3159 |A| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
3275 |A| 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
3277 |A| 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
3278 |A| 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
3279 |S| 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3578 |A| 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3627 |S| IBM P76/P77 Color Monitor, Business Black, Captured Cable
3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable
3635 |S| T210 Flat-Panel Monitor
3636 |A| L200P Flat Panel Monitor
3637 |A| IBM T541H/L150p 15" TFT Color Monitors, Business Black,
| | Captured Cable
3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable
3639 |S| IBM ThinkVision L170p Flat Panel Monitor
3640 |A| IBM ThinkVision L171p Flat Panel Monitor
3642 |A| ThinkVision L191p Flat Panel Monitor
3925 |A| Serial Port Converter Cable, 9-Pin to 25-Pin
3926 |A| Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15
| | pin D-shell)
4250 |A| Connector Cable, 6-slot PCI Riser to Media Bays
4254 |A| SCSI Connector Cable
4256 |A| Extender Cable - USB Keyboards, 2M
4260 |A| SCSI 2-drop Connector Cable and Terminator
4353 |S| H-100 Bus 8-position Cable
4451 |A| 1024MB (4x256MB) DIMMs, 208-pin, 8NS DDR SDRAM
4452 |A| 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
4453 |S| 4096MB (4x1024MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
4454 |A| 8192MB (4x2048MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
4490 |A| 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
4953 |S| IBM 64bit/66MHz PCI ATM 155 UTP Adapter
4957 |S| IBM 64bit/66MHz PCI ATM 155 MMF Adapter
4959 |S| IBM Token-Ring PCI Adapter
4960 |A| IBM e-business Cryptographic Accelerator
4961 |S| IBM Universal 4-Port 10/100 Ethernet Adapter
4962 |S| 10/100 Mbps Ethernet PCI Adapter II
4963 |N| PCI Cryptographic Coprocessor (FIPS-4)
4964 |A| PCI Cryptographic Coprocessor
5001 |A| Customer Service Specify
5005 |A| Software Preinstall
5126 |A| 1-way 1.45 GHz POWER4+ Processor Card
5127 |A| 2-way 1.45 GHz POWER4+ Processor Card
5131 |S| 1-way 1.0 GHz POWER4 Processor Card
5132 |S| 2-way 1.0 GHz POWER4 Processor Card
5133 |A| 1-way 1.2 GHz POWER4+ Processor Card
5134 |A| 2-way 1.2 GHz POWER4+ Processor Card
5700 |A| IBM Gigabit Ethernet-SX PCI-X Adapter
5701 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
5703 |A| PCI-X Dual Channel Ultra320 SCSI RAID Adapter
5706 |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
5707 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
5712 |S| PCI-X Dual Channel Ultra320 SCSI Adapter
5716 |A| 2 Gigabit Fibre Channel PCI-X Adapter
5718 |A| 10 Gigabit Ethernet-SR PCI-X Adapter
5719 |A| IBM 10 Gigabit Ethernet-LR PCI-X Adapter
5723 |A| 2 Port Asynchronous EIA-232 PCI Adapter
5752 |A| 4.7 GB SCSI DVD-RAM Drive
6120 |A| IBM 80/160 GB Internal Tape Drive with VXA Technology
6134 |N| 60/150 GB 16-bit 8mm Internal Tape Drive
6156 |S| 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
6158 |A| 20/40GB 4mm Internal Tape Drive
6203 |S| PCI Dual Channel Ultra3 SCSI Adapter
6204 |S| PCI Universal Differential Ultra SCSI Adapter
6228 |S| 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
6230 |S| Advanced SerialRAID Plus Adapter
6231 |S| 128 MByte DRAM Option Card
6235 |S| 32 MByte Fast-Write Cache Option Card
6239 |S| 2 Gigabit Fibre Channel PCI-X Adapter
6273 |A| Power Supply, 645 Watt AC, Hot-swap, Base and Redundant
6310 |S| IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
6312 |A| Quad Digital Trunk Telephony PCI Adapter
6556 |A| 6 Slot PCI Riser (MES order only)
6557 |A| Redundant Cooling
6568 |A| Ultra3 SCSI Backplane for Hot-swap Disks (4-pack)
6575 |A| Enhanced Planar (MES order only)
6576 |A| LPAR Enablement (MES order only)
7305 |A| AAP Software Pre-Install Indicator
8016 |S| Feature Code Indicator for Express Configuration -- pSeries
| | 630 (402E)
8033 |A| Feature Code Indicator for Express Configuration --
| | pSeries 630 (120C or 120E)
8034 |A| Feature Code Indicator for Express Configuration --
| | pSeries 630X (121C or 121E)
8035 |A| Feature Code Indicator for Express Configuration --
| | pSeries 630 (222C or 222E)
8036 |A| Feature Code Indicator for Express Configuration --
| | pSeries 630X (223C or 223E)
8037 |A| Feature Code Indicator for Express Configuration --
| | pSeries 630 (420C or 420E)
8038 |A| Feature Code Indicator for Express Configuration --
| | pSeries 630X (421C or 421E)
8079 |S| 4096MB (4x1024MB) DIMMs, Express Configurations,
| | Factory Only
8080 |A| 2048MB (4x512MB) DIMMs, Express Configurations,
| | Factory Only
8081 |A| 1024MB (4x256MB) DIMMs, Express Configurations,
| | Factory Only
8082 |S| 1-way 1.0 GHz POWER4 Processor Card, Express
| | Configurations, Factory Only
8083 |S| 2-way 1.0 GHz POWER4 Processor Card, Express
| | Configurations, Factory Only
8084 |S| 2-way 1.0 GHz POWER4 Processor Card, Express
| | Configuratons, Factory Only
8085 |S| Express Configuration -- pSeries 630 (100E)
8086 |S| Express Configuration -- pSeries 630 (200E)
8087 |S| Express Configuration -- pSeries 630 (400E)
8100 |S| Feature Code Indicator for Express Configuration --
| | pSeries 630X (101E)
8101 |S| Feature Code Indicator for Express Configuration --
| | pSeries 630X (201E)
8102 |S| Feature Code Indicator for Express Configuration --
| | pSeries 630X (401E)
8106 |A| 1-way 1.2 GHz POWER4+ Processor Card, Express
| | Configurations, Factory Only
8107 |A| 2-way 1.2 GHz POWER4+ Processor Card, Express
| | Configurations, Factory Only
8108 |A| 1-way 1.45 GHz POWER4+ Processor Card, Express
| | Configurations, Factory Only
8109 |A| 2-way 1.45 GHz POWER4+ Processor Card, Express
| | Configurations, Factory Only
8110 |A| Feature Code Indicator for Express Configuration -
| | pSeries 630 (140C or 140E)
8111 |A| Feature Code Indicator for Express Configuration -
| | pSeries 630X (141C or 141E)
8112 |A| Feature Code Indicator for Express Configuration -
| | pSeries 630 (240C or 240E)
8113 |A| Feature Code Indicator for Express Configuration -
| | pSeries 630X (241C or 241E)
8114 |A| Feature Code Indicator for Express Configuration -
| | pSeries 630 (440C or 440E)
8115 |A| Feature Code Indicator for Express Configuration --
| | pSeries 630X (441C or 441E)
8116 |S| Feature Code Indicator for Express Configuration -- pSeries
| | 630 (422E)
8120 |A| Attachment Cable, Hardware Management Console to Host,
| | 6-meter
8121 |A| Attachment Cable, Hardware Management Console to Host,
| | 15-meter
8131 |A| 128-Port Asynchronous Controller Cable, 4.5 Meter
8132 |A| 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
8133 |A| RJ-45 to DB-25 Converter Cable
8136 |S| Rack Mountable Remote Asynchronous Node 16-Port EIA-232
8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232
8177 |A| Feature Code Indicator for Express Configuration
| | pSeries 630 (220C or 220E)
8179 |A| Feature Code Indicator for Express Configuration
| | pSeries 630X (221C or 221E)
8244 |A| Audio PCI Adapter for Workstations
8422 |A| Spaceball 3D Input Device
8423 |A| Magellan XT 3D Input Device
8700 |A| Quiet Touch Keyboard - Business Black, US English, #103P
8701 |A| Quiet Touch Keyboard - Business Black, French, #189
8702 |A| Quiet Touch Keyboard - Business Black, Italian, #142
8703 |A| Quiet Touch Keyboard - Business Black, German/Austrian,
| | #129
8704 |A| Quiet Touch Keyboard - Business Black, UK English, #166
8705 |A| Quiet Touch Keyboard - Business Black, Spanish, #172
8706 |A| Quiet Touch Keyboard - Business Black, Japanese, #194
8707 |A| Quiet Touch Keyboard - Business Black, Brazilian
| | Portuguese, #275
8708 |A| Quiet Touch Keyboard - Business Black, Canadian French,
| | #058
8710 |A| Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
| | #120
8711 |A| Quiet Touch Keyboard - Business Black, Swedish/Finnish,
| | #153
8712 |A| Quiet Touch Keyboard - Business Black, Danish, #159
8713 |A| Quiet Touch Keyboard - Business Black, Bulgarian, #442
8714 |A| Quiet Touch Keyboard - Business Black,
| | Swiss,French/German, #150f/g
8716 |A| Quiet Touch Keyboard - Business Black, Norwegian, #155
8718 |A| Quiet Touch Keyboard - Business Black, Portuguese, #163
8719 |A| Quiet Touch Keyboard - Business Black, Greek, #319
8720 |A| Quiet Touch Keyboard - Business Black, Hebrew, #212
8721 |A| Quiet Touch Keyboard - Business Black, Hungarian, #208
8723 |A| Quiet Touch Keyboard - Business Black, Polish, #214
8725 |A| Quiet Touch Keyboard - Business Black, Slovakian, #245
8726 |A| Quiet Touch Keyboard - Business Black, Czech, #243
8727 |A| Quiet Touch Keyboard - Business Black, Turkish, #179
8729 |A| Quiet Touch Keyboard - Business Black, LA Spanish, #171
8730 |A| Quiet Touch Keyboard - Business Black, Arabic, #238
8733 |A| Quiet Touch Keyboard - Business Black, Korean, #413
8734 |A| Quiet Touch Keyboard - Business Black, Chinese/US, #467
8735 |A| Quiet Touch Keyboard - Business Black, French Canadian,
| | #445
8736 |A| Quiet Touch Keyboard - Business Black, Thailand, #191
8738 |A| Quiet Touch Keyboard - Business Black, Russian, #443
8739 |A| Quiet Touch Keyboard - Business Black, Croatian, #105
8740 |A| Quiet Touch Keyboard - Business Black, US English ISO9995,
| | #103P
8741 |A| 3-Button Mouse - Business Black
8800 |A| Quiet Touch Keyboard - USB, Business Black, US English,
| | #103P
8801 |A| Quiet Touch Keyboard - USB, Business Black, French, #189
8802 |A| Quiet Touch Keyboard - USB, Business Black, Italian, #142
8803 |A| Quiet Touch Keyboard - USB, Business Black,
| | German/Austrian, #129
8804 |A| Quiet Touch Keyboard - USB, Business Black, UK English,
| | #166
8805 |A| Quiet Touch Keyboard - USB, Business Black, Spanish, #172
8806 |A| Quiet Touch Keyboard - USB, Business Black, Japanese, #194
8807 |A| Quiet Touch Keyboard - USB, Business Black,
| | Brazilian/Portuguese, #275
8808 |A| Quiet Touch Keyboard - USB, Business Black, Canadian
| | French, #058
8810 |A| Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch,
| | #120
8811 |A| Quiet Touch Keyboard - USB, Business Black,
| | Swedish/Finnish, #153
8812 |A| Quiet Touch Keyboard - USB, Business Black, Danish, #159
8813 |A| Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
8814 |A| Quiet Touch Keyboard - USB, Business Black,
| | Swiss/French/German, #150F/G
8816 |A| Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
8818 |A| Quiet Touch Keyboard - USB, Business Black, Portuguese, #163
8819 |A| Quiet Touch Keyboard - USB, Business Black, Greek, #319
8820 |A| Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
8821 |A| Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
8823 |A| Quiet Touch Keyboard - USB, Business Black, Polish, #214
8825 |A| Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
8826 |A| Quiet Touch Keyboard - USB, Business Black, Czech, #243
8827 |A| Quiet Touch Keyboard - USB, Business Black, Turkish, #179
8829 |A| Quiet Touch Keyboard - USB, Business Black, LA Spanish,
| | #171
8830 |A| Quiet Touch Keyboard - USB, Business Black, Arabic, #238
8833 |A| Quiet Touch Keyboard - USB, Korean, #413
8834 |A| Quiet Touch Keyboard - USB, Business Black, Chinese/US,
| | #467
8835 |A| Quiet Touch Keyboard - USB, Business Black, French
| | Canadian, #445
8836 |A| Quiet Touch Keyboard - USB, Business Black, Thai, #191
8838 |A| Quiet Touch Keyboard - USB, Business Black, Russian, #443
8839 |A| Quiet Touch Keyboard - USB, Business Black,
| | Yugoslavian/Latin, #105
8840 |A| Quiet Touch Keyboard - USB, Business Black, US English
| | (EMEA), #103P
8841 |A| Mouse - Business Black with Keyboard Attachment Cable
9004 |A| Southern Hemisphere Designator for Monitors
9300 |A| Language Group Specify - US English
9556 |A| 6 Slot PCI Riser (Initial order only)
9575 |S| RIO Ports and LPAR Enablement (Initial order only)
9703 |A| Language Group Specify - French
9704 |A| Language Group Specify - German
9705 |A| Language Group Specify - Polish
9707 |A| Language Group Specify - Portuguese
9708 |A| Language Group Specify - Spanish
9711 |A| Language Group Specify - Italian
9712 |A| Language Group Specify - Canadian French
9714 |A| Language Group Specify - Japanese
9715 |A| Language Group Specify - Traditional Chinese (Taiwan)
9716 |A| Language Group Specify - Korean
9718 |A| Language Group Specify - Turkish
9719 |A| Language Group Specify - Hungarian
9720 |A| Language Group Specify - Slovakian
9721 |A| Language Group Specify - Russian
9722 |A| Language Group Specify - Simplified Chinese (PRC)
9724 |A| Language Group Specify - Czech
9800 |A| Power Cord Specify - United States/Canada
9802 |A| Power Cord Specify - Brazil (125V, 15A)
9820 |A| Power Cord Specify - Belgium, Finland, France (250V, 16A)
9821 |A| Power Cord Specify - Denmark (250V, 10A)
9825 |A| Power Cord Specify - United Kingdom (250V, 13A)
9827 |A| Power Cord Specify - Israel (250V, 6-16A)
9828 |A| Power Cord Specify - Switzerland (250V, 10A)
9829 |A| Power Cord Specify - South Africa/Pakistan (250V, 16A)
9830 |A| Power Cord Specify - Italy/Chile (250V, 10A and 16A)
9831 |A| Power Cord Specify - Australia/New Zealand/Argentina
| | (250V, 10A)
9833 |A| Power Cord Specify - Thailand (250V, 15A)
9834 |A| Power Cord Specify - Uruguay (250V, 10A)
Model Conversions
Processor Conversion Features -- pSeries 630 Model 6E4
A customer with an IBM eServer pSeries Model 6C4 may want to replace
their 1-or 2-way POWER4 1.0 GHz processor, 1-or 2-way POWER4+ 1.2 GHz
processor, or 1-way POWER4+ 1.45 GHz processor via a processor
conversion. The processor feature conversion is available for field
installation only. The existing pSeries 630 processor being replaced
must be returned to IBM.
The following processor feature conversions are currently available:
From Feature Number To Feature Number
------------------------------- -------------------------------
5126, 1-way POWER4+ 1.45 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
5131 -- 1-Way 1.0 GHz POWER4 5132 -- 2-way 1.0 GHz POWER4
Processor Card Processor Card
5131, 1-way POWER4 1.0 GHz 5126, 1-way POWER4+ 1.45 GHz
Processor with 32 MB of L3 cache Processor with 8 MB of L3 cache
5131, 1-way POWER4 1.0 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 32 MB of L3 cache Processor with 8 MB of L3 cache
5132, 2-way POWER4 1.0 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 32 MB of L3 cache Processor with 8 MB of L3 cache
5133, 1-way POWER4+ 1.2 GHz 5134, 2-way POWER4+ 1.2 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
5133, 1-way POWER4+ 1.2 GHz 5126, 1-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
5133, 1-way POWER4+ 1.2 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
5134, 2-way POWER4+ 1.2 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
8082, 1-way POWER4 1.0 GHz 5126, 1-way POWER4+ 1.45 GHz
Processor with 32 MB of L3 cache, Processor with 8 MB of L3 cache
8082, 1-way POWER4 1.0 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 32 MB of L3 cache, Processor with 8 MB of L3 cache
8083, 2-way POWER4 1.0 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 32 MB of L3 cache, Processor with 8 MB of L3 cache
8084, 2-way POWER4 1.0 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 32 MB of L3 cache, Processor with 8 MB of L3 cache
8106, 1-way POWER4+ 1.2 GHz 5134, 2-way POWER4+ 1.2 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
8106, 1-way POWER4+ 1.2 GHz 5126, 1-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
8106, 1-way POWER4+ 1.2 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
8107, 2-way POWER4+ 1.2 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
8108, 1-way POWER4+ 1.45 GHz 5127, 2-way POWER4+ 1.45 GHz
Processor with 8 MB of L3 cache Processor with 8 MB of L3 cache
Note: 1-way (#5131/#8082) or 2-way (#5132/#8083/#8084) POWER4 1.0 GHz
processors cannot be used with 1-way (#5133/#8106) or 2-way (#5134/#8107)
POWER4+ 1.2 GHz processors or 1-way (#5126/#8108) or 2-way (#5127/#8109)
POWER4+ 1.45 GHz processors.
Note: A processor conversion from 1.0 or 1.2 GHz Processor to a 1.45 GHz
processor requires FC #6557, Redundant Cooling to be installed in the
system.
Note: All processor conversions from POWER4 Processors to POWER4+
processors require FC #6556 and either FC #6575 or #9575 to be installed
in the system.
Note: Feature Numbers 8082, 8083, 8084, 8106, 8107, 8108, and 8109 are
identical to Feature Numbers 5131, 5132, 5132, 5133, 5134, 5126, and 5127
respectively, and are used in Express Configurations.
Back to top
Technical Description
|
Deskside/desktop:
- Width: 300.0 mm (11.8 in)
- Depth: 725.0 mm (28.5 in)
- Height: 530.0 mm (20.9 in)
- Weight:
- 36.0 kg (79.2 lb) - Minimum Configuration
- 51.0 kg (112.2 lb) - Maximum Configuration
- Temperature: 5 to 35 degrees C (41 to 95 F)
- Relative humidity: 8% to 80%
- Maximum wet bulb: 27 degrees C (80 F)
- Operating voltage: (auto-ranging) 100 to 127 or 200 to 240 V ac
- Operating frequency: 50/60 Hz
- Power requirements:
- 2-way (typical configuration): 330 watts
- 2-way (maximum configuration): 500 watts
- 4-way (typical configuration): 500 watts
- 4-way (maximum configuration): 750 watts
- Thermal output:
- 2-way (typical configuration): 1129 BTU/hour
- 2-way (maximum configuration): 1693 BTU/hour
- 4-way (typical configuration): 1693 BTU/hour
- 4-way (maximum configuration): 2540 BTU/hour
- Power source loading:
- 2-way (typical configuration): 0.348 kVA
- 2-way (maximum configuration): 0.522 kVA
- 4-way (typical configuration): 0.522 kVA
- 4-way (maximum configuration): 0.783 kVA
- Maximum altitude: 2,135 m (7,000 ft)
Noise Level and Sound Power
- Sound Power: Model 6E4 6.0 Bels Idle/6.0 Bels Operating
EMC Conformance Classification
- This equipment is subject to FCC rules and it shall comply with the
appropriate FCC rules before final delivery to the buyer or centers of
distribution.
- U.S.A.: FCC Class A for Deskside/desktop
- Europe: CISPR 22 Class A for Deskside/desktop
- Japan: VCCI-A for Deskside/desktop
- Korea: Korean Requirement Class A for Deskside/desktop
- China: People's Republic of China commodity inspection law
Homologation -- Telecom Environmental Testing (Safety and
EMC)
- Homologation approval for specific countries has been initiated with
the IBM Homologation and Type Approval (HT&A) organization in LaGaude.
These IBM pSeries models and applicable features meet the environmental
testing requirements of the country TELECOM and have been designed and
tested in compliance with the Full Quality Assurance Approval (FQAA)
process as delivered by the British Approval Board for Telecom (BABT),
the U.K. Telecom Regulatory authority.
Product Safety/Country Testing/Certification
- UL 1950 Underwriters Laboratory, Safety Information
- CSA C22.2 No. 950-M86
- EN60950 European Norm
- ENN55022: 1998 (Class B for Tower; Class A for Rack)
- EN55024
- EN61000-3-2
- EN61000-3-3
- IEC 950, Edition 1, International Electrotechnial Commission, Safety
Information
- Nordic deviations to IEC-950 1st Edition, as outlined in document
EMKO-TSE(05-SEC) 200/93
General Requirements
- The product is in compliance with IBM Corporate Bulletin C-B
0-2594-000 Statement of Conformity of IBM Product to External Standard
(Suppliers Declaration).
Processors
- A minimum of one processor card is required.
- A maximum of four processors on two cards is allowed.
- A 1-way processor card (#5131, #5126, #5133, #8106, or #8108) cannot
be installed with a 2-way processor card (#5132, #5127, #5134, #8107, or
#8109).
- Processors with different speeds (1.0, 1.2, 1.45 GHz) cannot be mixed
within the system.
- FC#5126 and #5127 require FC #6557, Redundant Cooling
- Each processor contains a single CPU Single Chip Module (SCM) and
that SCM's local memory. This includes:
- 32 MB of L3 cache on #5131 and #5132.
- 8 MB of L3 cache on #5126, #5127, #5133, #5134, #8106, #8107, #8108,
and #8109.
- Each processor contains 32 KB of data cache and 64 KB of instruction
cache.
- Each 1-way processor SCM contains 1.44 MB of L2 cache.
- A 2-way processor SCM shares the 1.44 MB of L2 cache.
Power Supply
- A minimum of one power supply is required on an order.
- AC system requires order of feature number 6273
Redundant power supply/Redundant Cooling
- Redundant power and redundant cooling are not required.
- Redundant AC Power (Second #6273)
- Redundant cooling (#6557)
- Redundant power (second power supply #6273) requires redundant
cooling (#6557)
System Memory
- A maximum of 16 GB of system memory in a system with 1 processor
card. A maximum of 32 GB of system memory in a system with 2 processor
cards.
- A minimum of 1 GB of memory is required in a 1-, or 2-way system. A
minimum of 2 GB of memory is recommended but not required in a 4-way
system.
- Memory DIMMs must be ordered and installed in quads of equal value
(for example 4 x 256 MB DIMMs).
- Memory plugs into the processor card. Eight memory DIMM slots per
processor card. Maximum of two memory features per processor card.
- Memory should be balanced across the two processor cards (4-way) for
best performance.
- Eight memory DIMM slots are located on the right-hand side of the
processor card. Slots 1-4 are on the top of the card and slots 5-8 are
on the bottom of the card.
- A system with 1 processor card can have a maximum memory of 16GB.
The following table is an example of memory DIMM placement:
Memory DIMMs Feature Slot
Size Recommended Code Positions
----- ----------------- -------- -------------------------------
1 GB 4 x 256 MB DIMMs 4451 Slots 1, 3, 6 and 8
2 GB 4 x 512 MB DIMMs 4452 Slots 1, 3, 6 and 8
4 GB 4 x 1024 MB DIMMs 4453 Slots 1, 3, 6 and 8
8 GB 8 x 1024 MB DIMMs 2 x 4453 Slots 1, 2, 3, 4, 5, 6, 7 and 8
16 GB 8 x 2048 MB DIMMs 2 x 4454 Slots 1,2,3,4,5,6,7 and 8
- A system with 2 processor cards can have a maximum memory of 32GB.
The following table is an example of memory DIMM placement:
Memory DIMMs Feature Slot
Size Recommended Code Positions
----- ------------------- -------- -----------------------------------
1 GB Not recommended
2 GB 8x256 MB DIMMs 2 x 4451 Slots 1,3,6 and 8 in Book 1 and 2
4 GB 8x512 MB DIMMs 2 X 4452 Slots 1,3,6 and 8 in Book 1 and 2
8 GB 8x1024 MB DIMMs 2 x 4453 Slots 1,3,6 and 8 in Book 1 and 2
16 GB 8x2048 MB DIMMS 2 x 4454 Slots 1,3,6 and 8 on two
processor cards
32 GB 16x2048 MB DIMMs 4 x 4454 Slots 1,2,3,4,5,6,7 and 8 on two
processor cards
PCI Card Slots (all slots hot-swap, 64-bit, 133 MHz, 3.3
volts)
- There are 4 PCI-X slots in the pSeries 630 Model 6E4 and 6C4 with
#5131 and #5132.
- There are 6 PCI-X slots in the pSeries 630 Model 6E4 and 6C4 with
#5126, #5127, #5133, #5134, #8106, #8107, #8108, and #8109.
Figure 1. Model 6E4 Processor, Memory, and Adapter Slot
Locations
Top View
____________________________________________
| _____ ____ __________ __ __ __ __ |
| | P | | P | |_FAN 1__| | P | P | P | P | |
| | O | | O | |_FAN 2__| | C | C | C | C | |
| | W | | W | _____ ____ | I | I | I | I | |
| | E | | E | | P || P | | | | | |
| | R | | R | | R || R | S | S | S | S | |
| | | | | | O || O | L | L | L | L | |
| | | | | | C || C | O | O | O | O | |
| | S | | S | | || | T | T | T | T | |
| | U | | U | | || | | | | | |
| | P | | P | |_1_ ||_2 _|_4_|_3_|_2_|_1_| |
| | P | | P | ___________| FAN3______FAN4| |
| | L | | L | | | | | |
| | Y | | Y | | MEDIA | | MEDIA | |
| |_1__| |_2__| | BAY | | BAY | |
| |__________ | | | | | |
| | OP | | | 1 | | 2 | |
| |_PANEL___| |____________| |_____________| |
|____________________________________________|
Front DASD bay 1 2 3 4
located under Media Bay 2
Figure 2. Memory Features
Feature
Feature Number Minimum Maximum
--------------------- ------- ------- -------
1024 MB 4451 0 4
(4 x 256 MB DIMMs)
2048 MB 4452 0 4
(4 x 512 MB DIMMs)
4096 MB 4453 0 4
(4 x 1024 MB DIMMs)
4096 MB 4490 0 4
(4 x 1024 MB DIMMs)
8192 MB 4454 0 4
(4 x 2048 MB DIMMs)
Logical Partitioning
Remote I/O Cables
When Remote I/O Cables (#3147 and #3148) are on the same order as the
p630 and the Model D20, they must be ordered on the Model D20. On stand-
alone p630 orders, Remote I/O Cables are optional.
IBM Hardware Management Console for pSeries
- The IBM Hardware Management Console for pSeries (HMC) (7315-C01)
provides a set of functions that are necessary to manage the pSeries 630
and LPAR configurations. These functions include:
- Create and store LPAR profiles, which define the processor, memory,
and I/O resources allocated to an individual partition.
- Start, stop, and reset a system partition.
- Boot a partition or system by selecting a profile.
- Display system and partition status.
- Display the contents of a virtual operator panel for each partition
or controlled system.
- The HMC also provides a service focal point for the system it
controls. It is connected to the service processor of the system via a
dedicated serial link. The HMC provides tools for problem determination
and service support, such as call-home and error-log notification through
an analog phone line.
- The HMC is a dedicated function device. It is utilized only for the
control and service functions of the pSeries servers it serves. It is
not available for use as a general purpose computing resource.
- Each HMC must be configured with a graphics display and a keyboard.
Various native language keyboards are available for the HMC. However,
the HMC displays menus and control information in English regardless of
the keyboard utilized.
- A mouse is included with each HMC and is not required to be ordered
separately.
- One HMC (7315-C01) can control up to 16 pSeries servers and a maximum
of 32 LPARs. Information regarding HMC control of clustered servers can
be found in the SCALING STATEMENT section of the Family 9078+01 IBM
eServer Cluster 1600, 9078-160 Sales Manual pages.
- If redundant HMC function is desired, the pSeries 630 can be attached
to two separate hardware management consoles.
- An Ethernet connection between the HMC and each active partition on
the pSeries server is recommended. This connection is utilized to
provide:
- Additional systems management such as WebSM management of AIX in the
individual partitions.
- Collection and passing of hardware service events to the HMC for
automatic notification of error conditions to IBM.
- Total system inventory collection.
- The HMC provides two integrated serial ports. One serial port is
required for each pSeries server controlled by the HMC. An additional
serial port is required for modem attachment if the Service Agent call-
home function is implemented. When more than two serial ports are
required, 8-port (#2943) and 128-port (#2944) asynchronous adapters
should be utilized.
- Up to two 8-port or 128-port asynchronous adapters are allowed per
HMC.
Audio
- Audio is not supported on the Model 6E4.
Note: (1) When #2842 or #2843 is also installed in the system.
I/O Adapters
- The PCI Advanced SerialRAID Plus adapter (#6230) can be selected with
or without the Fast-Write Cache Option card (#6235).
- The SSA Fast-Write Cache Option card (#6235) is a cache upgrade for
the SSA Advanced SerialRAID Plus adapter (#6230) and can only be selected
along with that adapter (maximum of one per #6230).
- The Ultra3 SCSI RAID adapter (#2498) cannot be placed in slot #4.
- Feature number 8397 must be placed in Slot 3. Slot 4 will be
unavailable.
- Refer to Figure 3 for additional I/O adapter limitations.
Figure 3. I/O Adapter Features
Feature 4-slot 4-slot
I/O Adapter Number Max Priority Size
========================== ======= ====== ======== ====
Ultra3 SCSI RAID 2498 3 3,2,1 Long
HIPPI Short-wave 2732 2 4,3,2,1 Long
HIPPI Long-wave 2733 2 4,3,2,1 Long
4-port USB Adapter 2737 4 4,3,2,1 Short
FDDI (Single) 2741 4 4,3,2,1 Short
FDDI (Dual) 2742 4 4,3,2,1 Short
GXT4500P Graphics Accl. 2842 1 4,3 Long
GXT6500P Graphics Accel. 2843 1 4,3 Long
GXT135P Graphics Accel. 2848 4 4,3,2,1 Short
GXT135P Graphics Accel. 2849 4 4,3,2,1 Short
/digital
8-Port Async 2943 4 4,3,2,1 Short
128-Port Async 2944 4 4,3,2,1 Short
622 MMF ATM 2946 4 4,3,2,1 Short
ARTIC960Hx 4-port 2947 4 4,3,2,1 Long
2-Port Multiprotocol 2962 4 4,3,2,1 Short
Gigabit Ethernet 2969 4 4,3,2,1 Short
Gigabit Ethernet-UTP 2975 4 4,3,2,1 Short
155 UTP ATM 4953 4 4,3,2,1 Short
155 MMF ATM 4957 4 4,3,2,1 Short
4/16 Token Ring 4959 4 4,3,2,1 Short
Crypotographic Coprocessor 4960 4 4,3,2,1 Short
4-Port 10/100 Ethernet 4961 4 4,3,2,1 Long
10/100 Ethernet 4962 4 4,3,2,1 Short
Crypotographic Coprocessor 4963 4 4,3,2,1 Short
Gigabit Ethernet PCI-X 5700 4 4,3,2,1 Short
Gigabit Ethernet-UTP PCI-X 5701 4 4,3,2,1 Short
PCI-X Dual Channel SCSI RAID 5703 4 4,3,2,1 Long
2-port 10/100/1000 Base-TX 5706 4 4,3,2,1 Short
2-port Gigabit Ethernet-SX 5707 4 4,3,2,1 Short
PCI-X Dual Channel Ultra320 5712 4 4,3,2,1 Long
SCSI
2 Gigabit Fibre Channel PCI-X 5716 4 4,3,2,1 Short
10 Gb Ethernet-SR PCI-X 5718 4 4,3,2,1 Short
Ultra3 SCSI 6203 4 4,3,2,1 Long
Ultra SCSI Differential 6204 4 4,3,2,1 Short
Gigabit Fiber Channel 6228 4 4,3,2,1 Short
SSA RAID 5 6230 4 4,3,2,1 Long
DIMM for #6230 6231 4 N/A N/A
Cache for #6230 6235 4 N/A N/A
2 Gigabit Fibre Channel PCI-X 6239 4 4,3,2,1 Short
ARTIC960Hx RxD 6310 4 4,3,2,1 Long
Quad Digital Trunk Telephony 6312 4 4,3,2,1 Long
Audio 8244 1 1,2 Long
Feature 6-slot 6-slot
I/O Adapter Number Max Priority Size
========================== ======= ====== ======== ====
Ultra3 SCSI RAID 2498 3 3,5,4,1,2 Long
HIPPI Short-wave 2732 2 3,5,4,6,1,2 Long
HIPPI Long-wave 2733 2 3,5,4,6,1,2 Long
4-port USB Adapter 2737 4 1,2,6,4,5,3 Short
FDDI (Single) 2741 4 1,2,6,4,5,3 Short
FDDI (Dual) 2742 6 1,2,6,4,5,3 Short
GXT4500P Graphics Accel. 2842 1 3,4 Long
GXT6500P Graphics Accel 2843 1 3,4 Long
GXT135P Graphics Accel. 2848 4 3,5,4,6,1,2 Short
GXT135P Graphics Accel. 2849 4 3,5,4,6,1,2 Short
/digital
8-Port Async 2943 6 1,2,6,4,5,3 Short
128-Port Async 2944 6 1,2,6,4,5,3 Short
622 MMF ATM 2946 6 3,5,4,6,1,2 Short
ARTIC960Hx 4-port 2947 6 3,5,4,6,1,2 Long
2-Port Multiprotocol 2962 6 1,2,6,4,5,3 Long
Gigabit Ethernet 2969 6 3,5,4,6,1,2 Short
Gigabit Ethernet-UTP 2975 4 3,5,4,6,1,2 Short
155 UTP ATM 4953 6 3,5,4,6,1,2 Short
155 MMF ATM 4957 6 3,5,4,6,1,2 Short
4/16 Token Ring 4959 6 3,5,4,6,1,2 Short
Crypotographic Coprocessor 4960 6 3,5,4,6,1,2 Short
4-Port 10/100 Ethernet 4961 6 3,5,4,6,1,2 Long
10/100 Ethernet 4962 6 3,5,4,6,1,2 Short
Crypotographic Coprocessor 4963 6 3,5,4,6,1,2 Short
Gigabit Ethernet PCI-X 5700 6 3,5,4,6,1,2 Short
Gigabit Ethernet-UTP PCI-X 5701 6 3,5,4,6,1,2 Short
PCI-X Dual Channel SCSI RAID 5703 5 3,5,4,6,1,2 Long
2-port 10/100/1000 Base-TX 5706 6 3,5,4,6,1,2 Short
2-port Gigabit Ethernet-SX 5707 6 3,5,4,6,1,2 Short
PCI-X Dual Channel Ultra320 5712 5 3,5,4,6,1,2 Long
SCSI
2 Gigabit Fibre Channel PCI-X 5716 4 3,5,4,6,1,2 Short
10 Gb Ethernet-SR PCI-X 5718 1 3,5,4,6,1,2 Short
Ultra3 SCSI 6203 6 3,5,4,6,1,2 Long
Ultra SCSI Differential 6204 6 3,5,4,6,1,2 Short
Gigabit Fiber Channel 6228 4 3,5,4,6,1,2 Short
SSA RAID 5 6230 4 3,5,4,6,1,2 Long
DIMM for #6230 6231 4 N/A N/A
Cache for #6230 6235 4 N/A N/A
2 Gigabit Fibre Channel PCI-X 6239 4 3,5,4,6,1,2 Short
ARTIC960Hx RxD 6310 6 3,5,4,6,1,2 Long
Quad Digital Trunk Telephony 6312 6 3,5,4,6,1,2 Long
Audio 8244 1 1,2 Long
Figure 3a: Cable/Asynch Node Features -- Maximums for 4-slot and
6-slot systems
Feature 4-slot 6-slot
Cable / Asynch Node Number Maximum Maximum
==================================== ====== ======= =======
Artic960Hx/RxD 4-Port T1 RJ-45 Cable 2709 4 6
Artic960Hx/RxD 4-Port E1 RJ-45 Cable 2710 4 6
Artic960Hx 4-Port T1 EIA-232 Cable 2861 4 6
Artic960Hx 4-Port X.21 Cable 2863 4 6
Artic960Hx 4-Port V.35 (DTE) Cable 2864 4 6
Artic960RxD Quad DTA T1 Cable, 3M 2871 4 6
Artic960RxD Quad DTA T1 Cable, 15M 2872 16 24
Artic960RxD Quad DTA E1 Cable, 3M 2873 4 6
Artic960RxD Quad DTA E1 Cable, 7.5M 2874 16 24
Rack Mountable Remote Asynch Node 8136 32 48
Storage Devices/Bays
- Media bay 2 can accommodate a DVD-RAM (#2623), diskette drive
(#2605), or tape drive (#6134, #6156, #6158 or #6120).
- If feature number 9556 or 6556 is not installed, feature numbers 6203
and 4260 are required to install feature numbers 2623, #6134, #6156,
#6158 and #6120.
- If feature number 9556 or 6556 is installed, feature number 4250 is
required to install feature numbers 2623, #6134, #6156, #6158 and #6120.
LPAR Enablement/RIO Ports
- A Model 6C4/6E4 with either feature number 9575, 6576, 6556, or 9556
is LPAR enabled
- A Model 6C4 with feature number 9575, 6575, or 9556 has RIO ports.
The Model 6E4 does not have RIO ports.
Graphic Adapters
- Graphics adapter, keyboard and mouse are not required in the minimum
configuration.
- The maximum number of graphics adapters supported is four.
- Feature numbers #2842 and #2843 support only 1-and 2-way
configurations.
- The maximum number of FC#2842 and #2843 is one.
- The following slot restrictions apply to a system with FC#5131 or
#5132 installed:
- The GXT4500P or GXT6500P is not allowed in slot 1 or 2.
- If the GXT4500P or GXT6500P is installed in slot 3, slot 4 must be
empty.
- If the GXT4500P or GXT6500P is installed in slot 4, slot 3 must be
empty.
- The following slot restrictions apply to a system with FC#5126,
#5127, #5133, #5134, #8106, #8106, #8107, #8108, or #8109 installed:
- The GXT4500P or GXT6500P is not allowed in slot 1, 2, 5 or 6.
Linux Operating System
- Supported UnitedLinux 1.0 (UL 1.0) distributions are:
- SuSE Linux Enterprise Server 8 for iSeries and pSeries (SLES 8)
- Turbolinux Enterprise Server 8 for IBM pSeries (TLES 8)
- Conectiva Linux Enterprise Edition 8 for IBM pSeries (CLEE 8)
- Supported Red Hat Linux distributions are:
- Red Hat Enterprise Linux AS for pSeries (RHEL 3)
Boot Devices
- Boot is supported via:
- CD-ROM/DVD-ROM/DVD-RAM
- Internal or external tape drives
- SCSI disk
- SSA disk
- SAN boot using Feature Number 6228 with microcode 3.22A1, or later.
- LAN boot
Reliability, Availability, Serviceability (RAS)
Since the 7028-6E4 and 6C4 systems have an optional diskette drive
(#2605) alternate methods for maintaining and servicing the system need
to be available for use if the diskette drive is not ordered; an external
internet connection must be available to maintain or update system
firmware and microcode to the latest required level.
Note: IBM eServer pSeries 630 Express configurations are Linux ready.
Models 6E4 and 6C4 Minimum System Configuration
The Model 6E4 deskside/desktop and Model 6C4 rack-mounted server can
be configured to incorporate up to two processors, 16 GB of system
memory, four or six (with feature number 9556 or 6556) PCI adapters, and
multiple media devices, as desired. This flexibility is available
through the many optional features for the Models 6E4 and 6C4.
Each Model 6E4 and 6C4 must include:
- One system Central Electronics Complex (CEC) enclosure with the
following items:
- One power cord supply, specify (#98XX or #99XX)
- One language group, specify (#9XXX)
- One processor card -- chosen from:
- POWER4 Processor -- 1-way 1.0 GHz, 32 MB L3 Cache (#5131)
- POWER4 Processor -- 2-way 1.0 GHz, 32 MB L3 Cache (#5132)
- POWER4+ Processor -- 1-way 1.2 GHz, 8 MB L3 Cache (#5133)
- POWER4+ Processor -- 2-way 1.2 GHz, 8 MB L3 Cache (#5134)
- POWER4+ Processor -- 1-way 1.45 GHz, 8 MB L3 Cache (#5126).
(Requires FC #6557, Redundant Cooling to be installed.)
- POWER4+ Processor -- 2-way 1.45 GHz, 8 MB L3 Cache (#5127).
(Requires FC #6557, Redundant Cooling to be installed.)
- One Ultra3 SCSI Backplane (#6568)
- One Ultra3 Controller to SCSI Backplane Cable (#4254)
- One RIO Ports and LPAR Enablement Indicator (initial order only)
(#9575) (must select feature with #5131, 5132. Not allowed with #5126,
5127, 5133, 5134).
- One 6-slot PCI Riser Indicator (initial order only)(#9556) (Select
feature with #5126, 5127, 5133, or 5134, not allowed with #5131, 5132)
- Choose 1 GB minimum memory:
- 1024 MB memory (4 x 256 MB DIMMs) (#4451)
- 2048 MB memory (4 x 512 MB DIMMs) (#4452)
- 4096 MB memory (4 x 1024 MB DIMMs) (#4453)
- 4096 MB memory (4 x 1024 MB DIMMs) (#4490)
- 8192 MB memory (4 x 2048 MB DIMMs) (#4454)
- Choose disk drive:
- 18.2 GB Ultra3 10K RPM (#3157)
- 36.4 GB Ultra3 10K RPM (#3158)
- 73.4 GB Ultra3 10K RPM (#3159)
- 36.4 GB Ultra3 15K RPM (#3277)
- 146.8 GB Ultra3 10K RPM (#3275)
- 73.4 GB Ultra3 15K RPM (#3278)
- Choose media device:
- One IDE CD-ROM (#2633)
- One IDE DVD-ROM (#2634)
- One DVD-RAM (#2623) (requires SCSI adapter #6203 and cable #4260, if
#9556 or #6556 is not installed in the system, otherwise requires cable
#4250)
- One power supply: AC power specify (#9172)
pSeries 630 Model 6C4 HA Solution Configuration
The Model 6C4 HA solution package must include a minimum of the
following hardware and software that must be ordered together as
specified:
Two Model 6C4 servers each incorporating:
- Minimum Model 6C4 configuration:
- One/two 1-way (#5131 or 5133 or 5126), one/two 2-way (#5132 or 5134
or 5127). (FC#5126 and #5127 require FC #6557.)
- 1 GB memory (#4451)
- One 18.2 GB disk drive (#3157)
- Ultra3 SCSI backplane (#6568)
- SCSI backplane cable (#4254)
- One 6-slot PCI Riser Indicator (initial order only)(#9556) (Must
select feature with #5126, 5127, 5133 or 5134, not allowed with #5131,
#5132)
- CD-ROM (#2633)
- One ac power specify (#9172)
- One power cord specify (#99xx)
- One language group specify (#9xxx)
- Two PCI SSA Adapters
- Two LAN Adapters (Integrated Ethernet Ports may be used)
- One Redundant CEC AC Power Supply (#6273) (one power supply in the
base system, a second needed for redundancy)
- One Redundant Cooling (#6557)
- One Serial to Serial Port Cable for Drawer/Drawer (#3124)
Note: Only one serial cable (#3124) is needed for the two Model 6C4
servers. Redundant dedicated heartbeat and messaging paths are required
via LAN and Async ports on each server.
- One Serial Port Converter Cable, 9-Pin to 25-Pin (#3925)
- One AIX V5.1, or later, license
- One HACMP V4.4.1, or later, license
Note: Additional optional Model 6C4 features can be added.
- One 7014-T00 or 7014-T42 System Rack, including:
- One 7133-D40 Serial Disk System, including:
- Four SSA disk drives
- Six Advanced SSA cables
- One Rochester Manufacturing Integration (#0987) or Dublin
Manufacturing Integration (#0970)
Note: Additional optional 7133-D40 features can be added.
If installing AIX on the system
- AIX 5L for Power V5.1 with the 5100-03 recommended maintenance
package (APAR IY32749) plus APAR IY38291
or
- AIX 5L for Power V5.2 plus APAR IY38292
If Installing Linux on the System
- SuSE Linux Enterprise 8 for iSeries and pSeries systems, or later
- Red Hat Enterprise Linux Advanced Server 3 for pSeries, or later.
Note: Not all model 6E4 system features available on the AIX
operating system are available on the LInux Operating systems.
Information on features and external devices supported by Linux on
the model 6E4 can be found at:
- http://www-1.ibm.com/servers/eserver/pseries/linux
Back to top
Publications
|
The following publications will be shipped with the 7028-6E4.
Additional copies are available. To order, contact your IBM
representative.
Part
Title Number
------------------------------------------- ---------
IBM eServer pSeries 630 Model 6C4 and 6E4 SA38-0605
Installation System Unit Safety Information SA23-2652
PCI Adapter Placement Reference SA38-0538
Warranty Information SA38-0586
Customer Support Information SA38-0584
Refer to the Related Publications section of the
pSeries 630 Model 6E4 and 6C4 Installation Guide for
information regarding other available pSeries 630 Model 6E4 publications,
or on the Web, visit:
- http://techsupport.services.ibm.com/eserver/
techKnow?expanded=pSeriespubs#pSeries
The following publications are available for a fee:
Part
Title Number
-------------------------------------------- ---------
IBM eServer pSeries 630 Model 6C4 and 6E4 SA38-0605
Installation Guide
IBM eServer pSeries 630 Model 6C4 and 6E4 SA38-0606
User's Guide
IBM eServer pSeries 630 Model 6C4 and 6E4 SA38-0604
Service Guide (U.S. only)
Diagnostic Information for Multi Bus Systems SA38-0509
Adapters, Devices, and Cable Information SA38-0516
PCI Adapter Placement Reference SA38-0538
Site Hardware Planning Information SA38-0508
Back to top
Features -- Specify/Special/Exchange
|
Specify Features for Machine Type 7028
- LANGUAGES
- (#9300) - Language Group Specify - US English
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9718) - Language Group Specify - Turkish
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- (#9724) - Language Group Specify - Czech
- POWER
- (#6273) - Power Supply, 645 Watt AC, Hot-swap, Base and Redundant
- LINECORDS
- (#9800) - Power Cord Specify - United States/Canada
- (#9802) - Power Cord Specify - Brazil (125V, 15A)
- (#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A)
- (#9821) - Power Cord Specify - Denmark (250V, 10A)
- (#9825) - Power Cord Specify - United Kingdom (250V, 13A)
- (#9827) - Power Cord Specify - Israel (250V, 6-16A)
- (#9828) - Power Cord Specify - Switzerland (250V, 10A)
- (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
- (#9830) - Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- (#9831) - Power Cord Specify - Australia/New Zealand/Argentina (250V,
10A)
- (#9833) - Power Cord Specify - Thailand (250V, 15A)
- (#9834) - Power Cord Specify - Uruguay (250V, 10A)
- MISCELLANEOUS
- (#5005) - Software Preinstall
- (#7305) - AAP Software Pre-Install Indicator
- (#0986) - CCS Customer Service Specify (US)
- (#1736) - Expedited Delivery Service Indicator (US only)
- (#5001) - Customer Service Specify
- (#9575) - RIO Ports and LPAR Enablement (Initial order only)
- SPECIFY CODES
- (#4651) - Rack Indicator, Rack #1
- (#4652) - Rack Indicator, Rack #2
- (#4653) - Rack Indicator, Rack #3
- (#4654) - Rack Indicator, Rack #4
- (#4655) - Rack Indicator, Rack #5
- (#4656) - Rack Indicator, Rack #6
- (#4657) - Rack Indicator, Rack #7
- (#4658) - Rack Indicator, Rack #8
- (#4659) - Rack Indicator, Rack #9
Special Features - Initial Orders
- PROCESSORS
- (#8082) - 1-way 1.0 GHz POWER4 Processor Card, Express
Configurations, Factory Only
- (#8083) - 2-way 1.0 GHz POWER4 Processor Card, Express
Configurations, Factory Only
- (#8084) - 2-way 1.0 GHz POWER4 Processor Card, Express Configuratons,
Factory Only
- (#8106) - 1-way 1.2 GHz POWER4+ Processor Card, Express
Configurations, Factory Only
- (#8107) - 2-way 1.2 GHz POWER4+ Processor Card, Express
Configurations, Factory Only
- (#8108) - 1-way 1.45 GHz POWER4+ Processor Card, Express
Configurations, Factory Only
- (#8109) - 2-way 1.45 GHz POWER4+ Processor Card, Express
Configurations, Factory Only
- MEMORY
- (#8079) - 4096MB (4x1024MB) DIMMs, Express Configurations, Factory
Only
- (#8080) - 2048MB (4x512MB) DIMMs, Express Configurations, Factory
Only
- (#8081) - 1024MB (4x256MB) DIMMs, Express Configurations, Factory
Only
- MISCELLANOUS
- (#8016) - Feature Code Indicator for Express Configuration -- pSeries
630 (402E)
- (#8033) - Feature Code Indicator for Express Configuration -- pSeries
630 (120C or 120E)
- (#8034) - Feature Code Indicator for Express Configuration -- pSeries
630X (121C or 121E)
- (#8035) - Feature Code Indicator for Express Configuration -- pSeries
630 (222C or 222E)
- (#8036) - Feature Code Indicator for Express Configuration -- pSeries
630X (223C or 223E)
- (#8037) - Feature Code Indicator for Express Configuration -- pSeries
630 (420C or 420E)
- (#8038) - Feature Code Indicator for Express Configuration -- pSeries
630X (421C or 421E)
- (#8085) - Express Configuration -- pSeries 630 (100E)
- (#8086) - Express Configuration -- pSeries 630 (200E)
- (#8087) - Express Configuration -- pSeries 630 (400E)
- (#8100) - Feature Code Indicator for Express Configuration -- pSeries
630X (101E)
- (#8101) - Feature Code Indicator for Express Configuration -- pSeries
630X (201E)
- (#8102) - Feature Code Indicator for Express Configuration -- pSeries
630X (401E)
- (#8110) - Feature Code Indicator for Express Configuration -- pSeries
630 (140C or 140E)
- (#8111) - Feature Code Indicator for Express Configuration -- pSeries
630X (141C or 141E)
- (#8112) - Feature Code Indicator for Express Configuration -- pSeries
630 (240C or 240E)
- (#8113) - Feature Code Indicator for Express Configuration -- pSeries
630X (241C or 241E)
- (#8114) - Feature Code Indicator for Express Configuration -- pSeries
630 (440C or 440E)
- (#8115) - Feature Code Indicator for Express Configuration -- pSeries
630X (441C or 441E)
- (#8116) - Feature Code Indicator for Express Configuration -- pSeries
630 (422E)
- (#8177) Feature Code Indicator for Express Configuration pSeries 630
(220C or 220E)
- (#8179) Feature Code Indicator for Express Configuration pSeries 630X
(221C or 221E)
Special Features - Plant and/or Field Installable
- ADAPTERS
- (#1820) - PCI-X Dual-port 4x IB HCA
- (#2498) - PCI 4-Channel Ultra3 SCSI RAID Adapter
- (#2732) - IBM Short-wave Serial HIPPI PCI Adapter for RS/6000
- (#2733) - IBM Long-wave Serial HIPPI PCI Adapter for RS/6000
- (#2737) - Keyboard/Mouse Attachment Card - PCI
- (#2741) - SysKonnect SK-NET FDDI-LP SAS PCI
- (#2742) - SysKonnect SK-NET FDDI-LP DAS PCI
- (#2842) - POWER GXT4500P Graphics Accelerator
- (#2843) - POWER GXT6500P Graphics Accelerator
- (#2848) - POWER GXT135P Graphics Accelerator
- (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#2946) - Turboways 622 Mbps PCI MMF ATM Adapter
- (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#2969) - Gigabit Ethernet - SX PCI Adapter
- (#2975) - 10/100/1000 Base-T Ethernet PCI Adapter
- (#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
- (#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
- (#4959) - IBM Token-Ring PCI Adapter
- (#4960) - IBM e-business Cryptographic Accelerator
- (#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- (#4963) - PCI Cryptographic Coprocessor (FIPS-4)
- (#4964) - PCI Cryptographic Coprocessor
- (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter
- (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
- (#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter
- (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#5718) - 10 Gigabit Ethernet-SR PCI-X Adapter
- (#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
- (#5723) - 2 Port Asynchronous EIA-232 PCI Adapter
- (#6203) - PCI Dual Channel Ultra3 SCSI Adapter
- (#6204) - PCI Universal Differential Ultra SCSI Adapter
- (#6228) - 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
- (#6230) - Advanced SerialRAID Plus Adapter
- (#6231) - 128 MByte DRAM Option Card
- (#6235) - 32 MByte Fast-Write Cache Option Card
- (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#6310) - IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
- (#6312) - Quad Digital Trunk Telephony PCI Adapter
- (#8244) - Audio PCI Adapter for Workstations
- CABLES
- (#1835) - 3 meter 4x IB Cable
- (#1836) - 8 meter 4x IB Cable
- (#1839) - 1.5 meter 4x IB Cable
- (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
- (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
- (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
- (#2425) - 2.5M 16-bit SCSI-2 System to System Cable
- (#2456) - LC-SC Fibre Channel Converter Cable
- (#2459) - LC-SC 62.5-Micron Fiber Converter Cable
- (#2709) - ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
- (#2710) - ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
- (#2861) - ARTIC960Hx 4-Port EIA-232 Cable
- (#2863) - ARTIC960Hx 4-Port X.21 Cable
- (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
- (#2871) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
- (#2872) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
- (#2873) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
Cable
- (#2874) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
Extension Cable
- (#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
- (#2934) - Asynchronous Terminal/Printer Cable EIA-232
- (#2936) - Asynchronous Cable EIA-232/V.24
- (#2951) - Cable, V.24 / EIA-232
- (#2952) - Cable, V.35
- (#2953) - Cable, V.36 / EIA-499
- (#2954) - Cable, X.21
- (#3124) - Serial to Serial Port Cable for Drawer/Drawer
- (#3125) - Serial to Serial Port Cable for Rack/Rack
- (#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin
- (#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
- (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15
pin D-shell)
- (#4250) - Connector Cable, 6-slot PCI Riser to Media Bays
- (#4254) - SCSI Connector Cable
- (#4256) - Extender Cable - USB Keyboards, 2M
- (#4260) - SCSI 2-drop Connector Cable and Terminator
- (#4353) - H-100 Bus 8-position Cable
- (#8120) - Attachment Cable, Hardware Management Console to Host,
6-meter
- (#8121) - Attachment Cable, Hardware Management Console to Host,
15-meter
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- DISKS
- (#3157) - 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3158) - 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3159) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3275) - 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3277) - 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3278) - 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly
- (#3279) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- DISPLAYS
- (#3627) - IBM P76/P77 Color Monitor, Business Black, Captured Cable
- (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
- (#3635) - T210 Flat-Panel Monitor
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black,
Captured Cable
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - IBM ThinkVision L171p Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- KEYBOARDS
- (#8700) - Quiet Touch Keyboard - Business Black, US English, #103P
- (#8701) - Quiet Touch Keyboard - Business Black, French, #189
- (#8702) - Quiet Touch Keyboard - Business Black, Italian, #142
- (#8703) - Quiet Touch Keyboard - Business Black, German/Austrian,
#129
- (#8704) - Quiet Touch Keyboard - Business Black, UK English, #166
- (#8705) - Quiet Touch Keyboard - Business Black, Spanish, #172
- (#8706) - Quiet Touch Keyboard - Business Black, Japanese, #194
- (#8707) - Quiet Touch Keyboard - Business Black, Brazilian
Portuguese, #275
- (#8708) - Quiet Touch Keyboard - Business Black, Canadian French,
#058
- (#8710) - Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
#120
- (#8711) - Quiet Touch Keyboard - Business Black, Swedish/Finnish,
#153
- (#8712) - Quiet Touch Keyboard - Business Black, Danish, #159
- (#8713) - Quiet Touch Keyboard - Business Black, Bulgarian, #442
- (#8714) - Quiet Touch Keyboard - Business Black, Swiss,French/German,
#150f/g
- (#8716) - Quiet Touch Keyboard - Business Black, Norwegian, #155
- (#8718) - Quiet Touch Keyboard - Business Black, Portuguese, #163
- (#8719) - Quiet Touch Keyboard - Business Black, Greek, #319
- (#8720) - Quiet Touch Keyboard - Business Black, Hebrew, #212
- (#8721) - Quiet Touch Keyboard - Business Black, Hungarian, #208
- (#8723) - Quiet Touch Keyboard - Business Black, Polish, #214
- (#8725) - Quiet Touch Keyboard - Business Black, Slovakian, #245
- (#8726) - Quiet Touch Keyboard - Business Black, Czech, #243
- (#8727) - Quiet Touch Keyboard - Business Black, Turkish, #179
- (#8729) - Quiet Touch Keyboard - Business Black, LA Spanish, #171
- (#8730) - Quiet Touch Keyboard - Business Black, Arabic, #238
- (#8733) - Quiet Touch Keyboard - Business Black, Korean, #413
- (#8734) - Quiet Touch Keyboard - Business Black, Chinese/US, #467
- (#8735) - Quiet Touch Keyboard - Business Black, French Canadian,
#445
- (#8736) - Quiet Touch Keyboard - Business Black, Thailand, #191
- (#8738) - Quiet Touch Keyboard - Business Black, Russian, #443
- (#8739) - Quiet Touch Keyboard - Business Black, Croatian, #105
- (#8740) - Quiet Touch Keyboard - Business Black, US English ISO9995,
#103P
- (#8800) - Quiet Touch Keyboard - USB, Business Black, US English,
#103P
- (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189
- (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142
- (#8803) - Quiet Touch Keyboard - USB, Business Black,
German/Austrian, #129
- (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English,
#166
- (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172
- (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194
- (#8807) - Quiet Touch Keyboard - USB, Business Black,
Brazilian/Portuguese, #275
- (#8808) - Quiet Touch Keyboard - USB, Business Black, Canadian
French, #058
- (#8810) - Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch,
#120
- (#8811) - Quiet Touch Keyboard - USB, Business Black,
Swedish/Finnish, #153
- (#8812) - Quiet Touch Keyboard - USB, Business Black, Danish, #159
- (#8813) - Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
- (#8814) - Quiet Touch Keyboard - USB, Business Black,
Swiss/French/German, #150F/G
- (#8816) - Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
- (#8818) - Quiet Touch Keyboard - USB, Business Black, Portuguese,
#163
- (#8819) - Quiet Touch Keyboard - USB, Business Black, Greek, #319
- (#8820) - Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
- (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
- (#8823) - Quiet Touch Keyboard - USB, Business Black, Polish, #214
- (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
- (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243
- (#8827) - Quiet Touch Keyboard - USB, Business Black, Turkish, #179
- (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish,
#171
- (#8830) - Quiet Touch Keyboard - USB, Business Black, Arabic, #238
- (#8833) - Quiet Touch Keyboard - USB, Korean, #413
- (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese/US,
#467
- (#8835) - Quiet Touch Keyboard - USB, Business Black, French
Canadian, #445
- (#8836) - Quiet Touch Keyboard - USB, Business Black, Thai, #191
- (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443
- (#8839) - Quiet Touch Keyboard - USB, Business Black,
Yugoslavian/Latin, #105
- (#8840) - Quiet Touch Keyboard - USB, Business Black, US English
(EMEA), #103P
- MEMORY
- (#4451) - 1024MB (4x256MB) DIMMs, 208-pin, 8NS DDR SDRAM
- (#4452) - 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
- (#4453) - 4096MB (4x1024MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
- (#4454) - 8192MB (4x2048MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
- (#4490) - 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
- MEDIA DEVICES
- (#2605) - Diskette Drive (Black bezel)
- (#2623) - 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
- (#2633) - IDE CD-ROM Drive (Black bezel)
- (#2634) - 16X/48X(max) IDE DVD-ROM Drive
- (#5752) - 4.7 GB SCSI DVD-RAM Drive
- (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology
- (#6134) - 60/150 GB 16-bit 8mm Internal Tape Drive
- (#6156) - 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
- (#6158) - 20/40GB 4mm Internal Tape Drive
- MISCELLANEOUS
- (#6556) - 6 Slot PCI Riser (MES order only)
- (#6557) - Redundant Cooling
- (#6568) - Ultra3 SCSI Backplane for Hot-swap Disks (4-pack)
- (#6575) - Enhanced Planar (MES order only)
- (#6576) - LPAR Enablement (MES order only)
- (#8422) - Spaceball 3D Input Device
- (#8423) - Magellan XT 3D Input Device
- (#8741) - 3-Button Mouse - Business Black
- (#8841) - Mouse - Business Black with Keyboard Attachment Cable
- PROCESSORS
- (#5126) - 1-way 1.45 GHz POWER4+ Processor Card
- (#5127) - 2-way 1.45 GHz POWER4+ Processor Card
- (#5131) - 1-way 1.0 GHz POWER4 Processor Card
- (#5132) - 2-way 1.0 GHz POWER4 Processor Card
- (#5133) - 1-way 1.2 GHz POWER4+ Processor Card
- (#5134) - 2-way 1.2 GHz POWER4+ Processor Card
- SPECIFY CODES
- (#9004) - Southern Hemisphere Designator for Monitors
Feature Descriptions
The following is a list of all feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.
The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#0986)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#1736) Expedited Delivery Service Indicator (US only)
(No Longer Available as of June 25, 2004)
This feature number specifies that a system will be shipped to the
customer with expedited 2 day delivery.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#1736)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#1820) PCI-X Dual-port 4x IB HCA
The #1820, PCI-X Dual-port 4x InfiniBand Host Channel Adapter,
provides attachment to the Topspin Server Switch models 120 and 270.
Connection to the Topspin Server Switches are accomplished by using the
4x IB Cables.
- Attributes provided: 2 ports of 4x IB to attach to the Topspin
Server Switch models 120 and 270
- Attributes required: Available PCI-X slot
Note: The four slot version has a maximum of 1 in the CEC, and 2 as a
system maximum.
- For 7028-6E4: (#1820)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: The four slot version has a maximum of 1 in the CEC, and 2 as a
system maximum.
(#1835) 3 meter 4x IB Cable
This 3 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 3 meter 4x IB cable
- Attributes required: 4x IB port
- For 7028-6E4: (#1835)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1836) 8 meter 4x IB Cable
This 8 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 8 meter 4x IB cable
- Attributes required: 4x IB port
- For 7028-6E4: (#1836)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1839) 1.5 meter 4x IB Cable
This 1.5 meter 4x IB cable is utilized for InfiniBand applications.
- Attributes provided: 1.5 meter 4x IB cable
- Attributes required: 4x IB port
- For 7028-6E4: (#1839)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2
differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7028-6E4: (#2114)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI
connector to a 68-pin P style connector. Cable has male Mini-68 pin
VHDCI connector on one end and a female 68 pin P style connector on the
other. Length = 0.3 meters.
- Attributes provided: Attachment of supported external sub-system to
integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
- Attributes required: None
- For 7028-6E4: (#2118)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2424) 0.6M 16-bit SCSI-2 System to System Cable
(No Longer Available as of December 10, 2004)
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7028-6E4: (#2424)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2425) 2.5M 16-bit SCSI-2 System to System Cable
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7028-6E4: (#2425)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2456) LC-SC Fibre Channel Converter Cable
Fibre Channel cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment of supported external device or
switch with one type fiber connector to a fibre channel adapter or cable
with the other type fiber connector.
- Attributes required: None
- For 7028-6E4: (#2456)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2459) LC-SC 62.5-Micron Fiber Converter Cable
62.5-micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 62.5-micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 7028-6E4: (#2459)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter
(No Longer Available as of December 12, 2003)
The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a non-
bootable high performance Ultra3 SCSI RAID Adapter providing RAID 0,1,1E,
5, or 5E capability and can address up to sixty 16-bit SCSI physical disk
drives on four independent SCSI buses.
To increase the data writing performance, a 128 MByte fast-write cache
is provided as a resident part of this adapter. The 128 MByte fast-write
cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter
that utilizes non-volatile RAM. During the unlikely event of an PCI
4-Channel Ultra3 SCSI RAID Adapter failure, a replacement PCI 4-Channel
Ultra3 SCSI RAID Adapter can be installed and the fast-write cache can be
removed from the failing adapter and installed in the new adapter to help
ensure data integrity. The 128 MByte fast-write cache can provide an
significant improvement in data throughput and response time during
certain sequence write operations compared to SCSI RAID adapters without
the fast-write cache. The response time and data transfer improvement
will vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.
The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3
SCSI buses. There are two internal ports and four external ports. The
two internal ports are shared with two of the external ports. Two of the
four busses can drive either an internal port or an external port. The
other two busses only drive external ports. The internal ports can be
used to provide an internal RAID solution on supporting RS/6000 systems.
Systems with one or two internal 6-pack disks can attach to a PCI
4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide
connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate. The four external ports also provide connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate.
Limitations:
- The four external ports do not support the connection to the IBM
7131-105 external Fast/Wide SCSI disk enclosure.
- Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that
run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up
to 80MBytes/s), the internally attached disk drives will run at a maximum
SCSI bus data rate specified by that supporting system backplane.
In order for full support and to take full advantage of the Ultra3 (up
to 160 MBytes/s) speed of this adapter, the proper AIX level also needs
to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX
versions support the full range of SCSI bus data rates (including Ultra3
SCSI up to 160 MByte/s). Check the AIX level your system has or is able
to support.
(#2605) Diskette Drive (Black bezel)
(No Longer Available as of December 30, 2005)
This feature code consists of a diskette drive, cable, and media bay
mounting hardware. The diskette drive handles up to 1.44 MB of data
capacity on a high density (2HD) floppy disk and 720 kB on a double
density floppy disk. The detailed physical dimensions are: height 25.4
mm (1.0 inch); width 101.6 mm (4.0 inches); depth 144.0 mm (5.7 inches
max).
Characteristics:
- Consists of read/write heads, a head positioning mechanism, and a
main printed circuit board interface.
- Amber color LED in-use indicator
- Low profile
- Low power consumption: 1.5 W typical (read/write mode)
- High reliability: 100,000 POH Mean Time Between Failures
- Operates in either vertical or horizontal positions
- Attributes provided: Diskette drive, cable, and mounting hardware.
- Attributes required: 1 open media bay
- For 7028-6E4: (#2605)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2623) 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
(No Longer Available as of September 24, 2004)
The SCSI-2 DVD-RAM drive is a multifunction storage device capable of
reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This
device also provides read/write compatibility with conventional 2.6GB
DVD-RAM discs. System boot and install functions are supported with
CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer
diameter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
- Interface: SCSI-2 supporting synchronous and asynchronous data
transfer
- Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
- High-speed synchronous burst rate of 10MB/second
- Loading tray accommodates both 8cm discs (in horizontal orientation
only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-recordable discs
- Reads CD-RW discs
- Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA
and audio
- Contains headphone output and line output for audio
Limitations:
- DVD video is not supported.
- Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM
- Attributes required: 1 half high media bay and one SCSI address
- For 7028-6E4: (#2623)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later. Linux - Refer to the
following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2633) IDE CD-ROM Drive (Black bezel)
(No Longer Available as of December 30, 2005)
The 48X (Max) IDE Internal CD-ROM Drive is a tray loading CD-ROM drive
providing up to 7200KB/sec maximum media data transfer rate. It is a
5.25 inch half-high form factor, multi-session capable, CD-ROM drive
which provides state of the art performance and supports existing 650MB
CD-ROM discs.
Characteristics:
- Media Data Transfer Rate: 7200 KB/sec (Max)
- Interface: IDE/ATAPI
- Avg. Random Access Time: 75ms (typical)
- Buffer Memory: 128KB
- Media capacity: 650MB
- Multisession capable (Reads CDR & CDRW media)
- 5.25-inch half-high form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
- Attributes provided: 650MB 48X (Max) (Up to 7200KB/sec) IDE CE-ROM
- Attributes required: 1 half-high media bay
- For 7028-6E4: (#2633)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later. Linux - Refer to the
following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2634) 16X/48X(max) IDE DVD-ROM Drive
(No Longer Available as of December 30, 2005)
The 16X/48X(max) IDE DVD-ROM Drive is an internal tray loading DVD-ROM
drive providing up to 7200KB/sec (CD-ROM) and 22.16MB/sec (DVD-ROM) data
transfer rates. It is a 5.25 inch half-high form factor multi-session
capable, DVD-ROM drive which provides state of the art performance and
supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4 GB DVD-ROM
(double-sided) discs. This drive also reads Type II (removable from
cartridge) DVD-RAM discs at DVD-ROM speeds. System boot and install
functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: CD-ROM=7200 KB/sec (max):
DVD-ROM=22.16MB/sec (max)
- Interface: IDE/ATAPI
- Avg. Random Access Time: CD-ROM=90ms(typical);
DVD-ROM=135ms(typical)
- Buffer Memory: 256KB
- Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4
GB(double-sided)
- Multisession capable (Reads CD/R & CD-R/W media)
- 5.25-inch half-high form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
Limitations:
- DVD video is not supported.
- This DVD-ROM drive is limited to reading only CD-type formatted media
when running with AIX 5.1 software.
- Attributes provided: 16X/48X(max) IDE DVD-ROM Drive
- Attributes required: 1 half-high media bay
- For 7028-6E4: (#2634)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, 5.2 or later. Linux - Refer to the
following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2709) ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable
(No Longer Available as of June 25, 2004)
4-Port T1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
ARTIC960RxD Quad Digital Trunk adapter.
(#2710) ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable
(No Longer Available as of June 25, 2004)
4-Port E1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
the ARTIC960RxD Quad Digital Trunk Adapter.
(#2732) IBM Short-Wave Serial HIPPI PCI Adapter for RS/6000
(No Longer Available as of December 10, 2004)
The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit
PCI adapter supporting TCP/IP over a serial HIPPI link. Data is sent and
received over optical fiber at 1.2 Gbps using the HIPPI stand-ard 20/24
bit encoding scheme with short wave optical transducers. The effective
maximum data rate of the HIPPI interface is 800 Mbps.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitations statements.
- http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Attachment to HIPPI Network
- Attributes required: One 32-bit PCI Slot and LPP 5765-E07
- For 7028-6E4: (#2732)
(#2733) IBM Long-Wave Serial HIPPI PCI Adapter for RS/6000
(No Longer Available as of August 8, 2003)
The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit
PCI adapter supporting TCP/IP over a serial HIPPI link. Data is sent and
received over optical fiber at 1.2 Gbps using the HIPPI stand-ard 20/24
bit encoding scheme with long wave optical transducers. The effective
maximum data rate of the HIPPI interface is 800 Mbps.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitations statements.
- http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Attachment to HIPPI Network
- Attributes required: One 32-bit PCI Slot and LPP 5765-E07
- For 7028-6E4: (#2733)
(#2737) Keyboard/Mouse Attachment Card - PCI
(No Longer Available as of December 30, 2005)
This PCI card provides for connection of one USB keyboard and mouse.
- Attributes provided: USB Keyboard/Mouse Attachment
- Attributes required: Empty PCI slot
- For 7028-6E4: (#2737)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2741) SysKonnect SK-NET FDDI-LP SAS PCI
(No Longer Available as of May 18, 2003)
- Fiber optical FDDI Single Attach Station
This adapter provides single attachment to a FDDI concentrator (or
point-to-point) using fiber optic cabling (not supplied with the
adapter).
It also offers high speed, low latency, and low CPU and bus
utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard
Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with
minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and
buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware.
See Limitations section.
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with
an FDDI SC (low cost fiber) connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature
2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect
SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have
the appropriate firmware factory installed. Systems shipped prior to
April 24, 1998, require an upgrade of system firmware to support the
Remote IPL function for FDDI adapters. If you find you have problems
with FDDI Remote IPL, make sure you obtain the latest system firmware.
Instructions on how to obtain this firmware can be obtained by calling
IBM Service and asking for Retain Tip H162841 or by reviewing and
downloading from the RS/6000 Support microcode web page located at
http://www.austin.ibm.com/support/micro/
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to
the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support
this adapter.)
- Attributes provided: One Single Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7028-6E4: (#2741)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2742) SysKonnect SK-NET FDDI-LP DAS PCI
(No Longer Available as of May 18, 2003)
- Fiber optical FDDI Dual Attach Station
This adapter provides either dual attachment to the main ring path or
dual homing to one or two FDDI concentrators using fiber optic cabling
(not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus
utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard
Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with
minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and
buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware.
See Limitations section.
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with
an FDDI SC (low cost fiber) connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature
2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect
SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have
the appropriate firmware factory installed. Systems shipped prior to
April 24, 1998, require an upgrade of system firmware to support the
Remote IPL function for FDDI adapters. If you find you have problems
with FDDI Remote IPL, make sure you obtain the latest system firmware.
Instructions on how to obtain this firmware can be obtained by calling
IBM Service and asking for Retain Tip H162841 or by reviewing and
downloading from the RS/6000 Support microcode web page located at
http://www.austin.ibm.com/support/micro/
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to
the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support
this adapter.)
- Attributes provided: One Dual Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7028-6E4: (#2742)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2842) POWER GXT4500P Graphics Accelerator
IBM POWER GXT4500P -- Entry, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
-
The GXT4500P Graphics Accelerator is a 64-bit entry 3D PCI Graphics
adapter. The graphics subsystems provide excellent functionality and
performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer:
- 24-Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8-Bit Double Buffered Alpha
- 8-bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Scissor Registers
- 5 HW Rectangular Clippers
- Texture Mapping:
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support:
- Resolutions Supported: 8/16/24 bit (up to 2048 x 1536 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1, or later
The GXT4500P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no
options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 7028-6E4: (#2842)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or AIX 5.2, or later
- CSU: Yes
- Return parts MES: No
(#2843) POWER GXT6500P Graphics Accelerator
IBM POWER GXT6500P -- Mid-range, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Geometry Accelerator on-board delivering highest ever IBM 3D graphics
performance
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
The GXT6500P Graphics Accelerator is a 64-bit mid-range 3D PCI
Graphics adapter. The graphics subsystems provide excellent
functionality and performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- LifeScience Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer:
- 24-Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4 / 8-Bit Overlay
- 8-Bit Double Buffered Alpha
- 8-bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Texture Mapping:
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
- Full OpenGL, graPHIGS Geometry Accelerator
API support - X11, graPHIGS, OpenGL 1.2.1
Monitor Support:
- Resolutions Supported: 8 / 24-bit (up to 2048 x 1536 @ 60Hz)
- Digital Monitor Support (up to 1600 x 1200 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1. or later
The GXT6500P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no
options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 7028-6E4: (#2843)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or AIX 5.2, or later
- CSU: Yes
- Return parts MES: No
(#2848) POWER GXT135P Graphics Accelerator
(No Longer Available as of December 12, 2003)
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs
- Up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 4.3.3 or 5.1
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 7028-6E4: (#2848)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2849) POWER GXT135P Graphics Accelerator with Digital Support
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 7028-6E4: (#2849)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2861) ARTIC960Hx 4-Port EIA-232 Cable
(#2863) ARTIC960Hx 4-Port X.21 Cable
(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable
(#2871) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
(#2872) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
(No Longer Available as of June 25, 2004)
(#2873) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
(#2874) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable
(No Longer Available as of June 25, 2004)
(#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 4-position cable should be used when
four or less adapters with H.100 connectors will be interconnected. When
more than 4 and less than or equal to 8 adapters will be connected, the
H.100 Bus 8-Drop Cable (#4353) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: None
- For 7028-6E4: (#2877)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2934) Asynchronous Terminal/Printer Cable EIA-232
The Asynchronous Printer/Terminal Cable is used for attaching
printers, plotters, and terminals that support the EIA-232 standard to
any asynchronous adapter. This cable is the equivalent of the
combination of FC 2936 (modem cable) and FC 2937 (printer/terminal
interposer) and replaces this method of printer/terminal attachment.
This cable is 3m (9.8 feet) long, uses DB25 connectors and is
supported on all RS/6000 systems using any asynchronous ports. It is
used in conjunction with :
- FC 2931 (8-port Async Adapter EIA232, ISA bus)
- FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
- Attributes provided: EIA232 device attachment capability
- Attributes required: Any RS/6000 Asynchronous port
- For 7028-6E4: (#2934)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2936) Asynchronous Cable EIA-232/V.24
Used to attach a modem to the standard I/O ports with the 10-pin to
25-pin converter cable (shipped with the system), 8-port Cable Assembly,
16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to
DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote
Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The
cable is 3 meters (9.8 feet) in length.
- Attributes provided: Modem attachment to async or serial port
- Attributes required: Async or serial port
- For 7028-6E4: (#2936)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.
(#2944) 128-Port Asynchronous Controller, PCI bus
(No Longer Available as of March 31, 2006)
The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.
The new RANs being announced provide 16 EIA-232 (#8137) or 16 RS-422
(#8138) ports yielding a total of 128-ports in a maximum configuration.
Existing RANs feature numbers 8130, 8134, or 8136 can also be used
with this adapter. If these RANs are connected the synchronous channel
the data rate drops down to 1.2 Mbps. For the best results keep the
previous and new RAN's on separate synchronous channels.
(#2946) Turboways 622 Mbps PCI MMF ATM Adapter
(No Longer Available as of December 17, 2004)
The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal
PCI Adapter. This adapter provides direct access to the ATM network at a
dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI
MMF ATM Adapter is a short form-factor adapter that interfaces to the
system via the PCI bus and connects to the 622 Mbps ATM network via
dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF
ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for
packet memory. This ATM adapter also provides a hardware assist for TCP
checksum which can provide a performance improvement by minimizing the
host CPU cycles .
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one-
slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of:
EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of
up 2.0M bps. Software support is provided by ARTIC960 Support for AIX,
Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC
and Bisync support, AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that
provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations. Go to to the
following URL to view the latest AIX 5.1 support limitation statements:
- http://www.ibm.com/servers/aix/os/adapters/51.html
(#2951) Cable, V.24 / EIA-232
(No Longer Available as of December 30, 2005)
V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7028-6E4: (#2951)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2952) Cable, V.35
(No Longer Available as of December 30, 2005)
V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7028-6E4: (#2952)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2953) Cable, V.36 / EIA-499
(No Longer Available as of December 30, 2005)
V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter.
Maximum of two cables per #2962.
- For 7028-6E4: (#2953)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2954) Cable, X.21
(No Longer Available as of December 30, 2005)
X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7028-6E4: (#2954)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2962) 2-Port Multiprotocol PCI Adapter
(No Longer Available as of December 30, 2005)
This adapter provides high-speed connections between stand-alone
system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI
Adapter connects via external communications equipment including Channel
Service Units (CSU), Data Service Units (DSU), or through synchronous
modems.
This adapter together with IBM AIXlink/X.25 provides a two-port
connection to X.25 packet switched networks. IBM AIXlink/X.25 is a
separately orderable LPP (5696-926).
2-Port Multiprotocol PCI Adapter with an appropriate cable is
compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954)
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952)
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
- CCITT V.10 Electrical
- CCITT V.11 Electrical
(#2969) Gigabit Ethernet - SX PCI Adapter
(No Longer Available as of December 12, 2003)
Provides a 1 Gbps (1000Base-SX) full-duplex Ethernet LAN connection.
An additional function called 'LARGE SEND' is now available. This
function offloads the TCP resegmentation operation from the AIX IP layer
to the adapter for outgoing (transmit side) TCP segments. This function
is only available on AIX version 5.1 with AIX Update CD LCD4-1103-01 or
later.
(#2975) 10/100/1000 Base-T Ethernet PCI Adapter
(No Longer Available as of December 12, 2003)
10/100/1000 Base-T Ethernet PCI Adapter is a Full-Duplex Gigabit
Ethernet adapter designed with highly integrated components to optimize
cost and performance. The adapter interfaces to the system via the PCI
bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted
Pair (UTP) cable for distances of up to 100m. The 10/100/1000 Base-T
Ethernet PCI Adapter supports jumbo frames for full-duplex Fast & Gigabit
Ethernet.
An additional function called 'LARGE SEND' is now available. This
function offloads the TCP resegmentation operation from the AIX IP layer
to the adapter for outgoing (transmit side) TCP segments. This function
is only available on AIX version 5.1 with AIX Update CD LCD4-1103-01 or
later.
AIX's Network Install Manager (NIM) boot capability is supported with
this adapter provided your system microcode is at the proper support
level. Check the following Web URL to review and download the latest
system microcode if needed:
- http://www.austin.ibm.com/support/micro/
Note: For optimum performance, adapter should be placed in a 64-bit PCI
card slot.
Limitation: The 1000 Mbps speed is not supported in Half-Duplex (HDX)
mode.
(#3124) Serial to Serial Port Cable for Drawer/Drawer
This 3.7 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted within
the same rack. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#3124)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3125) Serial to Serial Port Cable for Rack/Rack
This 8 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted in
separate racks. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#3125)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3157) 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(No Longer Available as of August 8, 2003)
The 18.2GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 18.2GB
of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of up to 160 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI-3 fast 80
- Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
Limitation: This disk drive requires attachment to a supported Ultra3
SCSI Adapter in an system that supports an Ultra3 SCSI cable/backplane in
order for the drive to run at 160MBps. Also, any and all other SCSI
devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s)
in order for this disk drive to run at 160MBps.
- Attributes provided: 18.2GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3157)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3158) 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
(No Longer Available as of March 31, 2005)
The 36.4GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 36.4GB
of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of up to 160 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI-3 fast 80
- Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
Limitation: This disk drive requires attachment to a supported Ultra3
SCSI Adapter in an system that supports an Ultra3 SCSI cable/backplane in
order for the drive to run at 160MBps. Also, any and all other SCSI
devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s)
in order for this disk drive to run at 160MBps.
- Attributes provided: 36.4GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3158)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3159) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly
The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of up to 160 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI-3 fast 80
- Average Seek Time: 5.38 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 3.00 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 83.88 MBps
Limitation: This disk drive requires attachment to a supported Ultra3
SCSI Adapter in an system that supports an Ultra3 SCSI cable/backplane in
order for the drive to run at 160MBps. Also, any and all other SCSI
devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s)
in order for this disk drive to run at 160MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3159)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3275) 146.8GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra320
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, and and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3275)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3277) 36.4GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 36.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3277)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3278) 73.4GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at
320MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3278)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3279) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra3
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 107 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3279)
(#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage
Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7028-6E4: (#3578)
(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable
(No Longer Available as of July 25, 2003)
The P76/P77 monitor has the following general characteristics:
- Business Black color
- 17-inch Flat Trinitron** CRT with a viewable image size of 406 mm
(16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum 1024 x
768 pels at up to 85 Hz non-interlaced, with a maximum addressability of
1600 x 1200 pels at 70 Hz.
Note: The P76 and P77 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7028-6E4: (#3627)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable
(No Longer Available as of February 27, 2004)
The P260/P275 monitor has the following general characteristics:
- Business Black color
- 21-inch Flat Trinitron** CRT with a viewable image size of 503 mm
(19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum
addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.
Note: The P260 and P275 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7028-6E4: (#3628)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3635) T210 Flat-Panel Monitor
(No Longer Available as of February 18, 2003)
The T210 flat-panel monitor has the following general characteristics:
- Business Black color
- 21-inch TFT LCD digital screen with a viewable image size of 528 mm
(20.8 inches) measured diagonally, incorporating a 0.207 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
2048 x 1536 pels at 60Hz.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7028-6E4: (#3635)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3636) L200P Flat Panel Monitor
The L200p flat-panel monitor has the following general
characteristics:
- Business Black color
- 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm
(20.1 inches) measured diagonally, incorporating a 0.255 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in
digital mode.
- Tilt/swivel stand
(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable
The T541H and the L150p monitors have the following general
characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 7028-6E4: (#3637)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3638) IBM C220p 21-inch Color Monitor, Business Black, and Cable
(No Longer Available as of June 24, 2005)
The IBM C220p monitor has the following general characteristics:
- Business Black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7028-6E4: (#3638)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3639) IBM ThinkVision L170p Flat Panel Monitor
(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:
- Business color
- 17.0-inch LCD digital screen with a viewable image size of
432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm
pixel pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7028-6E4: (#3639)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
The IBM ThinkVision L171p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
- Contrast ratio: 500:1 (minimal) 700:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7028-6E4: (#3640)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3642) - ThinkVision L191P Flat Panel Monitor
The ThinkVision L191p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7028-6E4: (#3642)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3925) Serial Port Converter Cable, 9-Pin to 25-Pin
This cable converts the 9-pin serial port on the system to a 25-pin
serial port which allows the user to attach 25-pin serial devices to the
system.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#3925)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3926) Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
This 4-meter cable and transposer (2 parts) allows external async
devices such as printers or terminals to be attached directly to the
9-pin serial port. This is equivalent to using #3925 in combination with
#2934.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#3926)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
This cable is required to connect displays with a 15-pin "D" shell
connector to the appropriate accelerator connector when it is farther
away than the attached monitor cable can reach. Rack mounted systems are
likely candidates for this extender cable.
- Attributes provided: 6-foot extension cable
- Attributes required: Supported monitor and adapter with a 15-pin "D"
shell connector.
- For 7028-6E4: (#4242)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4250) Connector Cable, 6-slot PCI Riser to Media Bays
Cable that connects the 6-slot PCI-X riser to the two media bays in a
p630 Model 6C4 or 6E4.
- Attributes provided: Connector cable
- Attributes required: 6-slot PCI-X riser in a p630 Model 6E4 or 6C4
- For 7028-6E4: (#4250)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4254) SCSI Connector Cable
SCSI cable that connects the integrated ultra3 controller on the
planar to the four hot-swap disks.
- Attributes provided: Connection between controller and disk drives.
- Attributes required: None
- For 7028-6E4: (#4254)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#4256) Extender Cable - USB Keyboards, 2M
This feature provides a 2M extension cable for use with USB keyboards.
- Attributes provided: 2M Extension Cable
- Attributes required: USB Keyboard
- For 7028-6E4: (#4256)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4260) SCSI 2-drop Connector Cable and Terminator
SCSI cable that connects a PCI SCSI adapter card to the two media
bays.
- Attributes provided: Connection between PCI SCSI adapter card and
the media bays.
- Attributes required: PCI SCSI adapter card
- For 7028-6E4: (#4260)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4353) H-100 Bus 8-position Cable
(No Longer Available as of December 10, 2004)
This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 8-position cable should be used when
more than four and less than or equal to eight adapters with H.100
connectors will be interconnected. If four or less adapters are
interconnected, the H.100 Bus 4-Drop Cable (#2877) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: None
- For 7028-6E4: (#4353)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4451) 1024MB (4x256MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 1024MB of system memory with 4 256MB DIMMs.
- Attributes provided: 1024MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7028-6E4: (#4451)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4452) 2048MB (4x512MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 2048MB of system memory with 4 512MB DIMMs.
- Attributes provided: 2048MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7028-6E4: (#4452)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4453) 4096MB (4x1024MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
(No Longer Available as of September 22, 2004)
Provides 4096MB of system memory with 4 1024MB DIMMs.
- Attributes provided: 4096MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7028-6E4: (#4453)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4454) 8192MB (4x2048MB) DIMMs, 208-pin, 8NS Stacked DDR SDRAM
Provides 8192MB of system memory with 4 2048MB DIMMs.
- Attributes provided: 8192MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7028-6E4: (#4454)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4490) - 4096MB (4x1024MB) DIMMs, 208-pin, 8NS DDR SDRAM
Provides 4096MB of system memory with 4 1024MB DIMMs.
- Attributes provided: 4096MB of system memory.
- Attributes required: Four empty memory DIMM positions.
- For 7028-6E4: (#4490)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4 )
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4953) IBM 64bit/66MHz PCI ATM 155 UTP Adapter
(No Longer Available as of December 17, 2004)
The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155
Mbps full-duplex connection to ATM networks over either permanent virtual
circuits (PVC) or switched virtual circuits (SVC). This adapter enables
TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair
(UTP). It also supports communication with devices located on an ATM
network or bridged to a Token-Ring, Ethernet, or other LAN.
(#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter
(No Longer Available as of March 31, 2006)
The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to
ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155
Mbps full-duplex connection using permanent virtual circuits (PVC) or
switched virtual circuits (SVC) and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on
an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
This 155 Mbps PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
(#4959) IBM Token-Ring PCI Adapter
(No Longer Available as of March 31, 2006)
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short,
32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half-
duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into
the ring, even when connected to speed-sensing hubs. This adapter will
operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45
connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin
D-shell connectors. The Token-Ring PCI Adapter will provide network boot
capability.
(#4960) IBM e-business Cryptographic Accelerator
The IBM e-business Cryptographic Accelerator is a short form factor
PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure
Web transaction, SSL operations is a key requirement. To do this,
public-key cryptographic operations using SSL handshake protocol is
employed. The IBM e-business Cryptographic Accelerator is a hardware
cryptographic solution that off-loads this compute-intensive public-key
cryptographic processing from the host.
The overall operation control, including command decoding, is
implemented in hardware and requires no on-card microprocessor subsystem.
As such, the adapter is a less expensive alternative to those who do not
need the high security of the on-card secure programming environment such
as is offered by the PCI Cryptographic Coprocessor(#4958), but do need
the high cryptographic performance that hardware acceleration provides by
offloading the host processor.
Note: The IBM e-business Cryptographic Accelerator is only supported by
the industry-standard PKCS #11 application programming interface (API)
Version 2.01, and applications which interface to the PKCS #11 Support
Program.
(#4961) IBM Universal 4-Port 10/100 Ethernet Adapter
(No Longer Available as of March 31, 2006)
IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long,
64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10
Base-T or 100 Base-T interfaces either half or full-duplex. Each port is
provided with it's own RJ-45 connector for attachment to standard CAT-3/5
Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u
compatible and provides full auto-negotiation for detecting speed and
duplex capability across each port. Network boot capability and Network
Install Manager (NIM) capability are available using this adapter if no
specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet
Adapter (#4961) should be considered where maximum port density is
required per I/O card slot. But, for high end systems, where card slots
are not the limiting factor and maximum throughput is required, the
single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM
10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions.
Below are some performance factors to consider when choosing the right
adapter for your needs. These performance comparisons are based on all
four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961)
being active.
- With all four ports under full bandwidth conditions, a single IBM
Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver
up to 3 times the comparable performance of a single IBM 10/100 Mbps
Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI
Adapter (#2968).
- Under most conditions, each port of the IBM Universal 4-Port 10/100
Ethernet Adapter (#4961) is expected to perform at greater than 50% the
throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter
II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968).
Note: The resulting performance in your environment compared to the above
may vary and depends upon the RS/6000 model, the I/O configuration, and
associated workload of your applications.
(#4962) 10/100 Mbps Ethernet PCI Adapter II
(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full-duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
- Half-/ Full-Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full-duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates)and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both of these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
(#4963) PCI Cryptographic Coprocessor (FIPS-4)
(No Longer Available as of February 8, 2005)
The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter
which combines hardware and software to provide a wide variety of
security services. The PCI Cryptographic Coprocessor (FIPS-4) is a
second generation adapter of the Cryptographic Coprocessor family that
provides high performance secure hardware engines for secure internet
transactions such as transmitting data, verifying electronic signatures,
bulk data encryption and decryption. In addition, the card is enclosed
in a tamper proof enclosure to restrict access to on card resources,
designed to FIPS 140-1 Level 4 standards.
Security functions supported by the adapter include:
- DES (Data Encryption Standard) (40-and 56-bit key) encryption and
decryption, with pre-and post-padding, the coprocessor uses both ECB
(electronic and codebook) and CBC (cipher block chain) modes of
encryption.
- MAC (Message Authentication) generation and MAC verification services
- Triple DES (three key) encryption and decryption of eight-byte units
- Secure RSA key-pair generation
- RSA signature generation and signature verification at 18
signatures/sec at 2048 bits
- Hardware random number generation
- Secure data storage and retrieval
- Other non-cryptographic security utilities can be carried out using
the onboard processor
As part of this adapter's physical security features, the following
events will cause an adapter shutdown and secure data zeroization.
- Shipping/Storage Temperature less than -15C or greater than 95C
- Dead Battery (VBAT less than 2.4V)
- Supply Voltage greater than 3.3V/12V max
- Mesh Sensor opens/shorts detection
- X-ray exposure
IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for download
from the following Web site.
- http://www.ibm.com/security/cryptocards
- PKCS #11 Version 2.01, an implementation of the industry-standard API
- IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ to
develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and cryptographic
hardware. For more information on custom contracts, refer to Web site
at:
- http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:
- http://www.ibm.com/security/cryptocards
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.
(#4964) PCI Cryptographic Coprocessor
The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter
combining hardware and software designed to provide high performance
hardware engines for secure internet transactions such as data exchange,
verifying electronic signatures, bulk data encryption and decryption.
Cryptographic processes are performed within a tamper resistant
enclosure on the adapter that is designed to meet FIPS PUB 140-1
standard for commercial cryptographic devices at Level 3.
Security functions supported by the adapter includes:
- Data Encryption Standard (DES) (56 and 40 bit keys) encryption and
decryption, with pre- and post-padding; the coprocessor uses both
electronic and codebook (ECB) and cipher block chain (CBC) modes of
encryption.
- Message Authentication (MAC) and financial PIN processing
- Triple DES encryption and decryption of general data
- RSA key-pair generation
- RSA signature generation and signature verification
- Secure Hashing Algorithm (SHA-1) in hardware
- Hardware random number generation
- Protected data storage and retrieval
- Other non-cryptographic security utilities can be carried out
using the onboard processor
IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for
download from:
- http://www.ibm.com/security/cryptocards
- PKCS #11 Version 2.01, an implementation of the industry-standard
API
- IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ
to develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and
cryptographic hardware. For more information on custom contracts,
refer to:
- http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7028-6E4: (#4964)
(#5001) Customer Service Specify
This feature code specifies that the system will receive special
request services from the Center for Customer Services (CCS) in
Rochester.
- Attributes provided: Customization
- Attributes required: None
- For 7028-6E4: (#5001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5005) Software Preinstall
Licensed programs may be preinstalled on the media selected. To order
this option, specify code (#5005) on the initial system order. The
preinstalled licensed programs will be at the same release level as
programs being shipped from the Program Libraries at the time the system
is manufactured.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#5005)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5126) 1-way 1.45 GHz POWER4+ Processor Card
1-way processor card with 1.45 GHz POWER4+ processor, 8 memory DIMM
slots, and 8MB of L3 cache.
- Attributes provided: 1-way processor card
- Attributes required: 1 processor card slot
- For 7028-6E4: (#5126)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: Feature conversion only
(#5127) 2-way 1.45 GHz POWER4+ Processor Card
2-way processor card with 1.45 GHz POWER4+ processor, 8 memory DIMM
slots, and 8MB of L3 cache per processor.
- Attributes provided: 2-way processor card
- Attributes required: 1 processor card slot
- For 7028-6E4: (#5127)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: Feature conversion only
(#5131) 1-way 1.0 GHz POWER4 Processor Card
(No Longer Available as of December 5, 2003)
1-way processor card with 1.0 GHz processor, 8 memory DIMM slots, and
32MB of L3 cache.
- Attributes provided: 1-way processor card
- Attributes required: 1 processor card slot
- For 7028-6E4: (#5131)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5132) 2-way 1.0 GHz POWER4 Processor Card
(No Longer Available as of December 5, 2003)
2-way processor card with 1.0 GHz processor, 8 memory DIMM slots, and
32 MB of L3 cache.
- Attributes provided: 2-way processor card
- Attributes required: 1 processor card slot
- For 7028-6E4: (#5132)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: Yes
(#5133) 1-way 1.2 GHz POWER4+ Processor Card
1-way processor card with 1.20 GHz POWER4+ processor, 8 memory DIMM
slots, and 8MB of L3 cache.
- Attributes provided: 1-way processor card
- Attributes required: 1 processor card slot
- For 7028-6E4: (#5133)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: Feature conversion only
(#5134) 2-way 1.2 GHz POWER4+ Processor Card
2-way processor card with 1.20 GHz POWER4+ processor, 8 memory DIMM
slots, and 8MB of L3 cache per processor.
- Attributes provided: 2-way processor card
- Attributes required: 1 processor card slot
- For 7028-6E4: (#5134)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: Feature conversion only
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter:
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64-bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7028-6E4: (#5700)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX
5.2 with the 12/2002 or later Update CD. Linux - Refer to the following
URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter:
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64-bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7028-6E4: (#5701)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX
5.2 with the 12/2002 or later Update CD. Linux - Refer to the following
URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter
The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit
3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing
RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI
physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 40 MByte fast-write cache
is provided as a resident part of this adapter. The 40 MByte fast-write
cache is resident on the Dual Channel Ultra320 SCSI RAID Adapter and
utilizes non-volatile RAM. The 40 MByte fast-write cache can provide an
significant improvement in data throughput and response time during
certain sequence write operations compared to SCSI RAID adapters without
the fast-write cache. The response time and data transfer improvement
will vary depending upon the data block sizes, the percentage of
sequential writes, machine type/model, and application parameters.
The Dual Channel Ultra320 SCSI RAID Adapter has two independent
ultra320 SCSI buses. There are two internal ports and two external
ports. The two internal ports are shared with the two external ports.
The SCSI busses can drive either an internal port or an external port.
The internal ports can be used to provide an internal RAID solution on
certain supporting pSeries systems with internal multiple disk drives or
packs of drives. Internally attached Ultra320 devices are designed to
run at a data rate of up to 320 MB per second on systems that have
internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or external ports) are required to be formatted to 522 byte
sectors. 522 byte sectors provide additional CRC error checking for
improved data integrety. A menu option is provided in the AIX supporting
software which will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array, a similar
menu option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors.
Also, there are some disk drives which do not support being formatted
to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the
user of these known situations when they exist. For disk microcode
updates, go to the following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI RAID Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate configured as either a non-array or
an array of disks. Also the two external ports provide non-array
connectivity to numerous other SCSI external subsystems. Check the
external subsystem sales/web pages for verification of connectivity
support with this adapter.
Limitations:
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a
Full-Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For
optimum performance, the adapter should be placed in a 64 bit PCI-X card
slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7028-6E4: (#5706)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: For optimum 2-Port Gigabit Ethernet PCI-X Adapter performance,
systems manufactured prior to December 6, 2002 may require a system
firmware update. Check the following Web URL after December 6, 2002 to
review and download latest firmware if needed.
- http://www.austin.ibm.com/support/micro/
If Feature Number 9556 or Feature Number 6556 is not installed in the
system, the Maximum Allowed and Inital order maximum is 4.
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution. Note: For optimum
performance, the adapter should be placed in a 64 bit PCI-X card slot
whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7028-6E4: (#5707)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: For optimum 2-Port Gigabit Ethernet PCI-X Adapter performance,
systems manufactured prior to December 6, 2002 may require a system
firmware update. Check the following Web URL after December 6, 2002 to
review and download latest firmware if needed.
- http://www.austin.ibm.com/support/micro/
If Feature Number 9556 or Feature Number 6556 is not installed in the
system, the Maximum Allowed and Inital order maximum is 4.
(#5712) PCI-X Dual Channel Ultra320 SCSI Adapter
(No Longer Available as of March 31, 2006)
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3
volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two
SCSI channels (busses), each capable of running 320 MBps (max.), up to
twice the maximum data transfer rate of the previous Dual Channel Ultra3
SCSI adapter (160 MBps). Each SCSI bus can either be internal (on
systems that support internal SCSI device or backplane attachments) or
external. Internally attached Ultra320 devices can run at a data rate of
up to 320 MB per second on systems that have internal backplanes that are
capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate. The two external ports also
provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1
Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also
the two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot
adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or
RS/6000 systems. The adapter also supports target mode.
Limitations:
(#5716) 2 Gigabit Fibre Channel PCI-X Adapter
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit
address/data, short form factor PCI-X adapter with an LC type external
fiber connector that provides single or dual initiator capability
over an optical fiber link or loop. With the use of appropriate
optical fiber cabling, this adapter provides the capability for a
network of high speed local and remote located storage. The 2
Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest
data rate (either 1 Gbps or 2 Gbps) of which the device or switch is
capable. Distances of up to 500 meters running at 1 Gbps data rate and
up to 300 meters running at 2 Gbps data rate are supported between the
adapter and an attaching device or switch. When used with IBM supported
Fibre Channel storage switches supporting long-wave optics, distances of
up to 10 kilometers are capable running at either 1 Gps or 2 Gps data
rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to
attach devices either directly, or by means of Fibre Channel Switches.
If attaching a device or switch with a SC type fiber onnector(s), use of
an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required order
Feature Code #6239- 2 Gigabit Fibre Channel PCI-X Adapter
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 7028-6E4: (#5716)
(#5718) 10 Gigabit Ethernet-SR PCI-X Adapter
Provides 10 Gigabit Ethernet PCI-X based server connections. Supports
distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um
multimode fiber. Adapter connector type is LC.
- Attributes provided: Conforms to the IEEE 802.3ae standard
- Attributes required: Supported on PCI-X slots only
- For 7028-6E4: (#5718)
(#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter
Offers 10 Gigabit Ethernet PCI-X based server connections over a
maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The
adapter conforms to the IEEE 802.3ae standard. The adapter requires
9um single-mode fiber optic cables and uses a SC connector type for
connecting into net-work infrastructure components like 10 Gigabit
Ethernet switch/router with SC connectors.
- Attributes provided: 10 Gigabit Ethernet connections
- Attributes required: Available PCI-X slot
- For 7028-6E4: (#5719)
(#5723) 2 Port Asynchronous EIA-232 PCI Adapter
Connection for 2 Asynchronous EIA-232 devices. Ports are
Programmable to support EIA-232 protocols, at a line speed of 128K bps.
- Attributes provided: 2 Asynchronous Ports
- Attributes required: One PCI Slot
- For 7028-6E4: (#5723)
(#5752) 4.7 GB SCSI DVD-RAM Drive
The 4.7 GB SCSI DVD-RAM Drive is an internal tray loading,
multifunction storage device capable of reading and writing 4.7GB
DVD-RAM discs as well as reading a multitude of other optical media
discs. This drive also reads Type II (removable from cartridge)
DVD-RAM discs. It is a half high form factor, multi-session capable,
DVD-RAM drive which provides state of the art performance. System boot
and install functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 4800 KB/sec CD-ROM (32X) max @ outer
diameter; 13.5 MB/sec read (10X DVD-ROM); 2.77 MB/sec write
(2X DVD-RAM) and 2.77 MB/sec read (2X DVD-RAM)
- Interface: SCSI
- Average Random Access Time: 110 ms CD-ROM; 130 ms DVD-ROM;
150 ms DVD-RAM
- Buffer Memory: 2 MB
- Loading tray accommodates both 8cm discs and 12cm discs.
- Operates in either vertical or horizontal position (8cm discs in
horizontal position only)
- Reads multi-session discs
- Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs.
- Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB
double-sided DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA,
CDDA and audio
Limitations:
- DVD video is not supported.
- Drive only reads CD-type formatted media with AIX 5.1.
- Attributes provided: One 4.7GB IDE DVD-RAM Drive
- Attributes required: One half high media bay
- For 7028-6E4: (#5752)
(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology
The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and achieve functions. This tape drive uses
VXAtape** data cartridges and is compression capable, providing a
capacity of up to 160 GB - a significant increase in capacity over the
previous internal tape drives.
Characteristics:
- Capacity: 80 GB native mode, 160 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: uses VXAtape data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
- Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
- Compatability: 80 GB mode (Read/Write), 160 GB compression
(Read/Write)
- Attributes provided: One 80/160 GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 7028-6E4: (#6120)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6134) 60/150 GB 16-bit 8mm Internal Tape Drive
(No Longer Available as of March 31, 2005)
The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch
half-high, 16-bit tape drive. This drive provides a high capacity tape
drive for save/restore and archiving functions. This tape drive uses IBM
8mm data cartridges and is compression capable, providing a capacity of
up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm
internal tape drive.
Characteristics:
- Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge with Smart Clean Technology
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical)
Compression M
- Interface: SCSI-2 16-bit Low Voltage Differential(LVD) /
Single-ended (SE) Asynchronous/Synchronous
- Compatibility: See the following Technical Support Web page (8mm
Tape Interchange Information section) for compatability information:
- http://techsupport.services.ibm.com/server/
mdownload/tapewhdr.html
- Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive
- Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 7028-6E4: (#6134)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux -
Refer to the following URL for systems and features that operate with
Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6156) 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
(No Longer Available as of December 6, 2002)
This feature consists of a 5.25-inch half-high, single-ended, 16-bit
tape drive. This drive provides a high capacity tape drive for
save/restore and archiving functions. This tape drive uses IBM 8mm data
cartridges and is compression capable, providing a capacity of up to 40
GB -- a 400% increase over the previous 5/10 GB 8mm internal tape drive.
(Black bezel)
Characteristics:
- Capacity: 20.0 GB Native Mode, 40.0 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 3MB/Sec. Native Mode, 6MB/Sec. (typical)
Compression M
- Interface: SCSI-2 16-bit (Single-ended) Asynchronous/Synchronous
- Compatibility: 2.3 GB Mode (Read only), 2.3 GB mode with Compression
(Read only), 5 GB Mode (Read only), 5 GB Compression (Read only), 7 GB
Mode (Read only), 7 GB Compression (Read only), 20 GB Mode (R/W), 20 GB
Compression (R/W).
- Attributes provided: 8mm tape capability
- Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address
- For 7028-6E4: (#6156)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6158) 20/40GB 4mm Internal Tape Drive
The 20/40 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high,
single-ended 16-bit tape drive, which provides a high capacity for
save/restore and achieve functions. This tape drive uses IBM 4-mm data
cartridges and is compression capable, providing a capacity of up to 40
GB - a significant increase in capacity over the previous 12/24 4-mm
internal tape drives (when using DDS-4 media).
Characteristics:
- Capacity: 20 GB native mode, 40 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm DDS-4 data cartridge
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
- Interface: SCSI-2 (single ended) asynchronous/synchronous
- Compatibility: 4 GB mode (Read/Write), 8 GB compression
(Read/Write); 12 GB mode(Read/Write), 24 GB compression (Read/Write), 20
GB mode (Read/Write), 40 GB compression (Read/Write).
Note: MES orders are shipped with both a black and a white bezel.
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address
- For 7028-6E4: (#6158)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later. Linux - Refer to the
following URL for systems and features that operate with Linux:
- www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6203) PCI Dual Channel Ultra3 SCSI Adapter
(No Longer Available as of December 12, 2003)
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64-bit adapter
and is an excellent solution for high-performance SCSI applications. The
PCI Dual Channel Ultra3 SCSI Adapter provides two SCSI channels (busses).
Each SCSI bus can either be internal (on systems that support internal
SCSI device or backplane attachments) or external and will support a data
rate of up to 160 MBytes per second, up to twice the maximum data
transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes
per second).
In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes
per second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this Ultra3 160 MBytes per second performance, all attaching
devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2
and Ultra3 devices coexist on the same bus, each device will operate at
its rated speed. For lower speed single-ended (SE) devices, the SCSI bus
will switch to single-ended (SE) performance and interface at the lower
SE bus data rate of the device.
Two industry-standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE subsystems to allow
connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI
Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI port will auto-throttle to a "Fast"
interface speed running no faster than 20MB/s maximum. This auto-
throttle function is performed to ensure best signal quality between host
adapter and attaching subsystem. The second external port is unaffected
unless a SE subsystem is also attached to it. If so, it would also auto-
throttle as described above.
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot
adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the
supported pSeries or RS/6000 systems.
(#6204) PCI Universal Differential Ultra SCSI Adapter
(No Longer Available as of December 30, 2005)
The PCI Universal Differential Ultra SCSI Adapter is the latest
technology advancement of an RS/6000 SCSI-2 differential adapter with a
maximum data transfer rates of 40 MBytes per second. This adapter has
the capability to be plugged into the newer +3.3 volt PCI slots as well
as the older +5 volt PCI slots. Feature code # 6204 allows connection to
external differential SCSI-2 F/W or Ultra SCSI type devices up to 25
meters away. Feature code # 6204 will negotiate with each external
device and transfer data at the fastest SCSI data transfer rate capable
by the external device. Check system sales pages as to which external
differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra)
documentation. Industry-standard 68 pin connectors are incorporated
(SCSI "P" connector definition of X3T9.2/90-048).
(#6228) 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus
(No Longer Available as of August 8, 2003)
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a 64-bit
address/data, short form factor PCI adapter with LC type external fiber
connectors that provides single or dual initiator capability over an
optical fiber link or loop. With the use of appropriate optical fiber
cabling, this adapter provides the capability for a network of high speed
local and remote located storage. The 2 Gigabit Fibre Channel Adapter
for 64-bit PCI Bus will auto-negotiate for the highest data rate (either
1Gps or 2Gps) of which the device or switch is capable. Distances of up
to 500 meters running at 1Gbps data rate and up to 300 meters running at
2Gbps data rate are supported between the adapter and an attaching device
or switch. When used with IBM supported Fibre Channel storage switches
supporting long-wave optics, distances of up to 10 kilometers are capable
running at either 1Gps or 2Gps data rates.
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be used to
attach devices either directly, or by means of Fibre Channel Switches.
If attaching a device or switch with a SC type fiber c onnector(s), use
of an LC-SC Fibre Channel Conversion Cable (#2456) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
- http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 FC/FC-AL interface
- Attributes required: 1 empty PCI slot
- For 7028-6E4: (#6228)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Fibre Channel boot capability is supported on this system with this
adapter provided your system microcode and adapter microcode are at the
proper support levels.
Note: If Feature Number 9556 or Feature Number 6556 is not installed in
the system, the Maximum Allowed and Initial order maximum is 4.
(#6230) Advanced SerialRAID Plus Adapter
(No Longer Available as of June 24, 2005)
The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop)
Serial Storage Architecture (SSA) adapter providing an instantaneous data
transfer rate of up to 160 MByte/s per loop. It also provides eight-
initiator, non-RAID capability, two-initiator RAID 1, two-initiator RAID
0 + 1, two-initiator RAID 5, or one-initiator RAID 0 capability. The
adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that
improves write performance in RAID 0+1, RAID 5, and non-RAID
applications. When the 32 MByte Fast-Write Cache Option Card is used,
the adapter can be configured in either single or dual initiator fast-
write cache mode. In dual initiator fast-write cache mode, if one of the
two adapters fail, the failing adapter is designed to transfer control
over to the other. Also, in dual initiator Fast Write Cache mode, the
128 MByte DRAM Option Card (#6231) is available and required to utilize
the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte
DRAM Option Card is not used in dual initiator fast-write cache mode, the
effective fast-write cache capacity will be 16 MBytes on each adapter.
See the 128 MByte DRAM Option Card (#6231) for information.
The Advanced SerialRAID Plus Adapter when operated in a RAID 5
configuration will support (2+P) to (15+P) arrays and up to 6 (15+P)
arrays. When operated in a RAID 1 or RAID 0+1 configuration, will
support up to eight disk drives mirrored. The adapter also supports Hot
Spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter
also supports connectivity to external disk enclosures and internal
RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also
supported (Refer to IBM 7133 Sales literature for additional information)
Any supported RS/6000 system can be set up to boot from an Advanced
SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included
as part of the configuration. Other disks associated with the adapter
can be RAID but at least one disk must be a non-RAID SSA disk. The
non-RAID SSA disk can be located under the covers of a processor unit or
in an external SSA storage unit. If your system is running with AIX
4.3.3 or later software, native boot capability is supported. For
factory system orders with AIX preload requested, an internal SCSI disk
drive will be preloaded as the native boot disk even if internal SSA disk
drive(s) are present. If your system is running with AIX 4.2.1 or AIX
4.3.2 software, the below procedure applies in order to boot using the
Advanced SerialRAID Plus Adapter:
- The non-RAID SSA disk can be located under the covers of a processor
unit or in an external SSA storage unit.
- A supported AIX version of software (with proper updates) must be
loaded to the non-RAID SSA disk using AIX's Network Install Manager
(NIM) before booting from the non-RAID disk.
- The system with a non-RAID SSA disk must have a network connection
with another RS/6000 system performing the NIM Master function to perform
the install. On RS/6000 SP systems, a similar network install is
performed from a control workstation.
- Once AIX with updates is installed on the non-RAID SSA disk and the
system is configured for booting, booting will take place from the boot
disk without any support from the control processor or NIM Master and the
system does not have to be connected to the network at boot time.
After October 3, 2000, a 3-Way Copy Function will be available. This
3-Way Copy Function allows a user to create a third copy to an existing
RAID-1 or RAID 0+1 array while mirrored operation continues. 3-Way Copy
allows the user, at any time after the copy process has completed, to
split the third copy off from the original RAID-1 or RAID 0+1 array to
form an independent RAID copy. This third copy or "snapshot" copy could
be typically used to perform a backup or to test some new application.
The 3-Way Copy Function is available only via a code download and can
only be gained by going to the SSA web support pages defined below.
When performing SSA device or subsystem planning, installation,
upgrades, or preventive maintenance, refer to the following Web support
pages. They provide access to the latest SSA publications and support
code for the system, SSA adapters, and SSA subsystems. These sites
should also be considered during system hardware and/or operating system
upgrades if SSA devices are included in the system.
http://www.storage.ibm.com/hardsoft/products/ssa/
The above link contains links to SSA publications and other SSA Web
sites, including the one below.
http://www.storage.ibm.com/hardsoft/products/
ssa/rs6k/index.html
The above link contains lists of the latest SSA support code and
provides code download capability for the RS/6000 and AIX environments.
LIMITATION: Internal ports on the adapter are not supported. See
machine/model specific information to determine if internal SSA disk
drives and associated hardware/cables are supported.
- Attributes provided: Attachment of SSA devices
- Attributes required: One PCI bus slot
- For 7028-6E4: (#6230)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6231) 128 MByte DRAM Option Card
(No Longer Available as of June 24, 2005)
The 128 MByte DRAM Option Card (#6231) is a field only optional
feature to the Advanced SerialRAID Adapter (#6225) or a factory or field
option for the Advanced SerialRAID Plus Adapter (#6230). This option is
recommended for dual initiator fail-over Fast Write Cache (FWC)
configurations. The option increases the existing DRAM on the adapter to
128 MBytes. In this type of dual initiator FWC configuration, the
existing DRAM does not have enough capacity to completely contain a copy
of each adapter's 32 MByte FWC and also provide additional working space.
The 128 MByte DRAM Option Card provides this additional space needed to
contain a full copy of each adapters 32 MByte FWC content and allows for
full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card
(#6231) is not used with dual-initiator FWC configurations, the effective
FWC capacity is reduced to 16 MBytes per adapter.
If this feature is ordered as a field upgrade to an existing
SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software
and publications are also provided.
- Attributes provided: 128 MByte DRAM memory
- Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced
SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card
(#6235) is also recommended.
- For 7028-6E4: (#6231)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6235) 32 MByte Fast-Write Cache Option Card
(No Longer Available as of June 24, 2005)
The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast-
write optional feature that plugs into the IBM RS/6000 Advanced
SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus
(#6230). It utilizes non-volatile RAM. During the unlikely event of an
Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID
Adapter can be installed and the fast-write cache can be removed from the
failing adapter and installed in the new adapter insuring data integrity.
The 32 MByte Fast-Write Cache Option Card can provide a significant
improvement of data throughput and response time during certain sequence
write operations compared to SSA RAID adapters without the fast-write
cache. The response time and data transfer improvement using the
optional card will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters. The 32 MByte Fast-Write Cache Option Card plugged into the
Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or
RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write
Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (#
6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single-
initiator or dual initiator configurations.
- Attributes provided: None
- Attributes required: One Advanced SerialRAID Adapter (#6225) or
Advanced SerialRAID Plus Adapter (#6230).
- For 7028-6E4: (#6235)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6239) 2 Gigabit Fibre Channel PCI-X Adapter
(No Longer Available as of December 30, 2005)
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gbps or 2 Gbps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber onnector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
Note: If Feature Number 9556 or Feature Number 6556 is not
installed in the System, the maximum allowed and the initial
order maximum is 4.
(#6273) Power Supply, 645 Watt AC, Hot-swap, Base and Redundant
This feature provides a 645 Watt AC power supply, either as the
primary power supply in the system, or the secondary power supply for
redundant power. Each power supply, base and redundant, comes with one
power cord.
- Attributes provided: 250 Watt AC Power Supply
- Attributes required: Available Power Supply Bay
- For 7028-6E4: (#6273)
- Minimum required: 1
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6310) IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
(No Longer Available as of June 25, 2004)
Provides voice processing for up to four T1 or E1 digital trunk lines,
providing connectivity for 96 (T1) or 120 (E1) voice channels in a single
PCI slot. The voice processing function is provided by Voice Response
for AIX Version 2.2 LPP. Nine cables are available in support of this
adapter.
Note: When more than one IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
(#6310) is ordered, the Artic960RxD Quad DTA, H.100, 4-drop Cable (#2877)
is required.
Note: When a Digital Trunk Quad PCI adapter (#6309) is already present
and an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered,
an IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and IBM
ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879) are
required.
Note: When an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is
ordered with an IBM ARTIC960RxD DSP Resource PCI Adapter (#2949), the IBM
ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and the IBM
ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879) are
required.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements.
- http://www.ibm.com/servers/aix/os/adapters/51.html
(#6312) - Quad Digital Trunk Telephony PCI Adapter
The Quad Digital Trunk Telephony PCI Adapter is a highly integrated,
intelligent IO adapter designed for use in computer telephony
applications. The adapter is a 4 port, full length, universal PCI 2.2
compliant adapter. It performs voice processing for up to four T1 or E1
digital trunks, providing connectivity for 96 (T1) or 120 (E1) voice
channels in a single PCI slot. The adapter is made up of two separate
cards. A base card that interfaces with the host system and performs
telephony processing functions, and a daughter card that provides the
physical interface to the switch. The voice processing function is
provided by WebSphere Voice Response for AIX LPP with Direct Talk
Technology.
In conjunction with this adapter, network attachment cables using
industry standard RJ-48 connector can be obtained from commercial cable
suppliers in a variety of lengths to suit the particular installation.
Additional information about these cables can be obtained by referring to
this adapter's Installation and User's Guide.
Note: When 2 to 4 Quad Digital Trunk Telephony PCI Adapters (#6312) are
ordered and planned to be used in a single partition, the Artic960RxD
Quad DTA, H.100, 4-drop Cable (#2877) is required. When more than 4 Quad
Digital Trunk Telephony PCI Adapters (#6312) are ordered and planned to
be used in a single partition, the H.100 Bus 8-Position Cable (#4353) is
required.
Limitations: The Quad Digital Trunk Telephony PCI Adapter (#6312)
cannot reside in the same system with the IBM ARTIC960RxD Quad Digital
Trunk PCI Adapter (#6310). The Quad Digital Trunk Telephony PCI Adapter
(#6312) is only supported in machines running in a full system partition.
- Attributes provided: Connection of 1 to 4 T1/E1 Trunk lines.
- Attributes required: One available PCI slot and WebSphere Voice
Response for AIX LPP application software.
- For 7028-6E4: (#6312)
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 6)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#6556) 6 Slot PCI Riser (MES order only)
This feature number provides a 6-slot PCI riser that will replace the
4-slot riser in a Model 6E4 or 6C4 system. Orderable only as part of a
Processor Conversion from #5131 or #5132 to #5126, #5127, #5133 or #5134.
Also provides an integrated SE SCSI controller.
- Attributes provided: 6-slot PCI riser; integrated SE SCSI
- Attributes required: Model 6E4 or 6C4 system
- For 7028-6E4: (#6556)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: Yes
(#6557) Redundant Cooling
This feature provides redundant cooling in the system.
- Attributes provided: Redundant cooling
- Attributes required: None
- For 7028-6E4: (#6557)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6568) Ultra3 SCSI Backplane for Hot-swap Disks (4-pack)
This feature provides a backplane that allows the installation of four
hot-swap disks in the system.
- Attributes provided: Ultra3 SCSI backplane
- Attributes required: None
- For 7028-6E4: (#6568)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#6575) Enhanced Planar (MES order only)
This feature number provides an enhanced system planar that is
required for installation of POWER4+ processors. It also provides RIO
ports for the Model 6C4.
- Attributes provided: Enhanced planar
- Attributes required: Model 6C4 or 6E4 system
- For 7028-6E4: (#6575)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: Yes
(#6576) LPAR Enablement (MES order only)
This feature number provides LPAR capabilities on a Model 6C4 or 6E4
system.
- Attributes provided: LPAR Enablement
- Attributes required: Model 6C4/6E4 system
- For 7028-6E4: (#6576)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: MES
- CSU: No
- Return parts MES: No
(#7305) AAP Software Pre-Install Indicator
Software pre-install indicator for Authorized Assemblers
- Attributes provided: Software Preinstall
- Attributes required: Authorized Assembler Order
- For 7028-6E4: (#7305)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8016) Feature Code Indicator for Express Configuration -- pSeries 630 (402E)
(No Longer Available as of October 31, 2003)
Express Configuration for the pSeries 630 Model 6E4. Consists of:
- 2 x #8084 (2-way 1.0 GHz POWER4+ processor)
- 4 x #8079 (4096MB memory DIMMs)
- 1 x #3158 (36.4GB hot-swap disk drive)
- 1 x #2633 (CDROM)
- 1 x #2849 (GXT135P Graphics Accelerator)
- 1 x #3637 (T541H 15" TFT color monitor)
- 1 x #4254 (SCSI connector cable)
- 3 x #4961 (4-port 10/100 Ethernet)
- 1 x #6273 (Power supply)
- 1 x #6568 (4-pack DASD backplane)
- 1 x #87xx (Keyboard)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8016)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8033) Feature Code Indicator for Express Configuration -- pSeries 630 (120C or 120E)
Express Configuration for the pSeries 630 Model 6C4/6E4. Consists of:
- 1 x #8106 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8033)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8034) Feature Code Indicator for Express Configuration -- pSeries 630X (121C or 121E)
Linux Ready Express Configuration for the pSeries 630 Model 6C4/6E4.
Consists of:
- 1 x #8106 (1-way 1.2 GHz POWER4+ processor)
- 1 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8034)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8035) Feature Code Indicator for Express Configuration -- pSeries 630 (222C or 222E)
Express Configuration for the pSeries 630 Model 6C4/6E4. Consists of:
- 2 x #8106 (1-way 1.2 GHz POWER4+ processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8035)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8036) Feature Code Indicator for Express Configuration -- pSeries 630X (223C or 223E)
Linux Ready Express Configuration for the pSeries 630 Model 6C4/6E4.
Consists of:
- 2 x #8106 (1-way 1.2 GHz POWER4+ processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8036)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8037) Feature Code Indicator for Express Configuration -- pSeries 630 (420C or 420E)
Express Configuration for the pSeries 630 Model 6C4/6E4. Consists of:
- 2 x #8107 (2-way 1.2 GHz POWER4+ processor)
- 4 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8037)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8038) Feature Code Indicator for Express Configuration -- pSeries 630X (421C or 421E)
Linux Ready Express Configuration for the pSeries 630 Model 6C4/6E4.
Consists of:
- 2 x #8107 (2-way 1.2 GHz POWER4+ processor)
- 4 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8038)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later, if installing AIX
on the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8079) 4096MB (4x1024MB) DIMMs, Express Configurations, Factory Only
(No Longer Available as of September 22, 2004)
Provides 4096MB of system memory with 4 1024MB DIMMs for systems being
included in Express Configurations. Equivalent to #4453.
(#8080) 2048MB (4x512MB) DIMMs, Express Configurations, Factory Only
Provides 2048MB of system memory with 4 512MB DIMMs for systems being
included in Express Configurations. Equivalent to #4452.
(#8081) 1024MB (4x256MB) DIMMs, Express Configurations, Factory Only
Provides 1024MB of system memory with 4 256MB DIMMs for systems being
included in Express Configurations. Equivalent to #4451
(#8082) 1-way 1.0 GHz POWER4 Processor Card, Express Configurations, Factory Only
(No Longer Available as of December 5, 2003)
Provides a 1-way processor card with 1.0 GHz processor, 8 memory DIMM
slots, and 32 MB of L3 cache for systems being included in Express
Configurations. Equivalent to #5131.
(#8083) 2-way 1.0 GHz POWER4 Processor Card, Express Configurations, Factory Only
(No Longer Available as of December 5, 2003)
Provides a 2-way processor card with 1.0 GHz processor, 8 memory DIMM
slots, and 32 MB of L3 cache for systems being included in Express
Configurations. Equivalent to #5132.
(#8084) 2-way 1.0 GHz POWER4 Processor Card, Express Configuratons, Factory Only
(No Longer Available as of December 5, 2003)
Provides a 2-way processor card with 1.0 GHz processor, 8 memory DIMM
slots, and 32 MB of L3 cache for systems being included in Express
Configurations. Equivalent to #5132.
(#8085) Express Configuration -- pSeries 630 (100E)
(No Longer Available as of December 5, 2003)
Express Configuration for the pSeries 630 Model 6E4. Consists of:
- 1 x #8082 (1-way 1 GHz POWER4 processor)
- 2 x #8081 (1024MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8085)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8086) Express Configuration -- pSeries 630 (200E)
(No Longer Available as of December 5, 2003)
Express Configuration for the pSeries 630 Model 6E4. Consists of:
- 1 x #8083 (2-way 1 GHz POWER4 processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8086)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8087) Express Configuration -- pSeries 630 (400E)
(No Longer Available as of December 5, 2003)
Express Configuration for the pSeries 630 Model 6E4. Consists of:
- 2 x #8084 (2-way 1 GHz POWER4 processor)
- 4 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8087)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8100) Feature Code Indicator for Express Configuration - pSeries 630X (101E)
(No Longer Available as of December 5, 2003)
Express Configuration for the pSeries 630X Model 6E4. Consists of:
- 1 x #8082 (1-way 1 GHz POWER4 processor)
- 2 x #8081 (1024MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8100)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX.
SuSE Linux Enterprise Server 7 for iSeries and pSeries systems, or later,
if installing Linux.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8101) Feature Code Indicator for Express Configuration - pSeries 630X (201E)
(No Longer Available as of December 5, 2003)
Express Configuration for the pSeries 630X Model 6E4. Consists of:
- 1 x #8083 (2-way 1 GHz POWER4 processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8101)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX.
SuSE Linux Enterprise Server 7 for iSeries and pSeries systems, or later
if installing Linux
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8102) Feature Code Indicator for Express Configuration - pSeries 630X (401E)
(No Longer Available as of December 5, 2003)
Express Configuration for the pSeries 630X Model 6E4. Consists of:
- 2 x #8084 (2-way 1 GHz POWER4 processor)
- 4 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8102)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX.
SuSE Linux Enterprise Server 7 for iSeries and pSeries systems, or later
if installing Linux
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8106) 1-way 1.2 GHz POWER4+ Processor Card, Express Configurations, Factory Only
Provides a 1-way processor card with 1.2 GHz POWER4+ processor, 8
memory DIMM slots, and 8 MB of L3 cache for systems being included in
Express Configurations. Equivalent to #5133.
- Attributes provided: 1-way processor equivalent to #5133.
- Attributes required: 1 processor card slot.
- For 7028-6E4: (#8106)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8107) 2-way 1.2 GHz POWER4+ Processor Card, Express Configurations, Factory Only
Provides a 2-way processor card with 1.2 GHz POWER4+ processor, 8
memory DIMM slots, and 8 MB of L3 cache for systems being included in
Express Configurations. Equivalent to #5134.
(#8108) 1-way 1.45 GHz POWER4+ Processor Card, Express Configurations, Factory Only
Provides a 1-way processor card with 1.45 GHz POWER4+ processor, 8
memory DIMM slots, and 8 MB of L3 cache for systems being included in
Express Configurations. Equivalent to #5126.
- Attributes provided: 1-way processor equivalent to #5126.
- Attributes required: 1 processor card slot.
- For 7028-6E4: (#8108)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8109) 2-way 1.45 GHz POWER4+ Processor Card, Express Configurations, Factory Only
Provides a 2-way processor card with 1.45 GHz POWER4+ processor, 8
memory DIMM slots, and 8 MB of L3 cache for systems being included in
Express Configurations. Equivalent to #5127.
- Attributes provided: 1-way processor equivalent to #5127.
- Attributes required: 1 processor card slot.
- For 7028-6E4: (#8109)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
Note: Maximum of 1 x 8109 with Feature Numbers 8112 and 8113.
(#8110) Feature Code Indicator for Express Configuration - pSeries 630 (140C or 140E)
Express Configuration for the pSeries 630 Model 6C4/6E4. Consists of:
- 1 x #8108 (1-way 1.45 GHz POWER4+ processor)
- 1 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- 1 x #6557 (Redundant cooling)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8110)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8111) Feature Code Indicator for Express Configuration - pSeries 630X (141C or 141E)
Linux Ready Express Configuration for the pSeries 630 Model 6C4/6E4.
Consists of:
- 1 x #8108 (1-way 1.45 GHz POWER4+ processor)
- 1 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- 1 x #6557 (Redundant cooling)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8111)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8112) Feature Code Indicator for Express Configuration - pSeries 630 (240C or 240E)
Express Configuration for the pSeries 630 Model 6C4/6E4. Consists of:
- 1 x #8109 (2-way 1.45 GHz POWER4+ processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- 1 x #6557 (Redundant cooling)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8112)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8113) Feature Code Indicator for Express Configuration - pSeries 630X (241C or 241E)
Linux Ready Express Configuration for the pSeries 630 Model 6C4/6E4.
Consists of:
- 1 x #8109 (2-way 1.45 GHz POWER4+ processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- 1 x #6557 (Redundant cooling)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8113)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8114) Feature Code Indicator for Express Configuration - pSeries 630 (440C or 440E)
Express Configuration for the pSeries 630 Model 6C4/6E4. Consists of:
- 2 x #8109 (2-way 1.45 GHz POWER4+ processor)
- 4 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- 1 x #6557 (Redundant cooling)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8114)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8115) Feature Code Indicator for Express Configuration - pSeries 630X (441C or 441E)
Linux Ready Express Configuration for the pSeries 630 Model 6C4/6E4.
Consists of:
- 2 x #8109 (2-way 1.45 GHz POWER4+ processor)
- 4 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- 1 x #6557 (Redundant cooling)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8115)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8116) Feature Code Indicator for Express Configuration -- pSeries 630 (422E)
(No Longer Available as of September 22, 2004)
Express Configuration for the pSeries 630 Model 6E4. Consists of:
- 2 x #8107 (2-way 1.2 GHz POWER4+ processor)
- 4 x #8079 (4096MB memory DIMMs)
- 1 x #3158 (36.4GB hot-swap disk drive)
- 1 x #2633 (CDROM)
- 1 x #2849 (GXT135P Graphics Accelerator)
- 1 x #3637 (T541H 15" TFT color monitor)
- 1 x #4254 (SCSI connector cable)
- 3 x #4961 (4-port 10/100 Ethernet)
- 1 x #6273 (Power supply)
- 1 x #6568 (4-pack DASD backplane)
- 1 x #87xx (Keyboard)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8116)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8120) Attachment Cable, Hardware Management Console to Host, 6-meter
This 6-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a
9-pin female connector for HMC connection and a 9-pin male
connection to attach to the HMC port on the host system. A 9-pin
to 25-pin adapter is also provided.
- Attributes provided: 6-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7028-6E4: (#8120)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8121) Attachment Cable, Hardware Management Console to Host, 15-meter
This 15-meter cable provides an asynch connection between the HMC
(Hardware Management Console) and the host system. It provides a
9-pin female connector for HMC connection and a 9-pin male
connection to attach to the HMC port on the host system. A 9-pin
to 25-pin adapter is also provided.
- Attributes provided: 15-meter HMC attachment cable
- Attributes required: Empty 9-pin asynch port on HMC
- For 7028-6E4: (#8121)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7028-6E4: (#8131)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7028-6E4: (#8132)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8133) RJ-45 to DB-25 Converter Cable
This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 7028-6E4: (#8133)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a
modified version of the existing 16-port Remote Async Node (feature #8130
or 8134) in an industry-standard 19-inch rack mount chassis to allow
simpler installation and ease-of-use. Like the existing RAN, it can also
be configured as a desktop device.
As an additional benefit, the metal chassis meets FCC Class B/CISPR B
when used with similarly rated RS/6000 host to meet the needs of
customers with these requirements.
The RANs provide 16 ports of EIA-232 capability with full modem
controls on each port and are connected to the 128-port Async Controller
(Micro Channel or ISA versions) residing in the host. RANs are connected
in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either
version).
The rack-mountable RAN offers these enhanced features:
- Industry-standard 19-inch rack mountable chassis (can be configured
for stacking on a desktop or mounted in a 19-inch rack).
- Meets FCC Class B/CISPR B when used with similarly rated RS/6000
host.
- All RJ-45 connectors are now on the front panel, greatly enhancing
cable management.
- The DB-15 synchronous connectors (cabling from host to RAN and
between RANs) and the power cord and switch are located on the rear
panel.
- Power supply is self contained within the unit.
The rack-mountable RAN offers these same features as the existing RAN
product:
- Identical function and support as existing 16-port Remote Async Node
(RAN), feature #8130 or 8134.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel or ISA host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of 62 meters (200
feet).
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer-supplied cables.
- Location of RAN up to 330 meters from the host using standard
shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN
connection
- Attributes required: 1 RAN-to-128-port Controller connection OR 1
RAN-to-RAN connection
- For 7028-6E4: (#8136)
- Minimum required: 0
- Maximum allowed: 48 (Initial order maximum: 48)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: Maximum of 8 per #2944 -- 128-port asynch adapter.
Note: If Feature Number 9556 or Feature Number 6556 is not installed in
the system, the Maximum Allowed and Initial order maximum is 32.
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 7028-6E4: (#8137)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8177) - Feature Code Indicator For Express Configuration
pSeries 630 (220C or 220E): Express Configuration for the pSeries 630
Model 6C4/6E4. Consists of:
- 1 x #8107 (2-way 1.2 GHz POWER4+ processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8177)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8179) Feature Code Indicator For Express Configuration
pSeries 630X (221C or 221E): Linux Ready Express Configuration for
the pSeries 630 Model 6C4/6E4. Consists of:
- 1 x #8107 (2-way 1.2 GHz POWER4+ processor)
- 2 x #8080 (2048MB memory DIMMs)
- 2 x #3158 (36.4GB hot-swap disk drive)
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#8179)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later if installing AIX on
the system. SuSE Linux Enterprise Server 8 for iSeries and pSeries
systems, or later, if installing Linux on the system.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8422) Spaceball 3D Input Device
Spaceball is a 3D input device that allows a customer to view a
computer-generated model from many angles. By applying fingertip control
to push, pull, and twist the ball, you manipulate the image on the
screen. Spaceball facilitates zooming, panning, and rotating.
- Attributes provided: Spaceball 3D Input Device
- Attributes required: S1 or S2 serial port
- For 7028-6E4: (#8422)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8423) Magellan XT 3D Input Device
The Magellan XT 3D Input Device is a high-level 3D input device which
provides real-time 3D motion control for increased productivity, better
design comprehension, and early detection of design errors.
- Attributes provided: Magellan XT 3D Input Device
- Attributes required: S1 or S2 serial port
- For 7028-6E4: (#8423)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8244) - Audio PCI Adapter for Workstations
The Audio PCI Adapter for Workstations is a high performance
workstation class audio PCI adapter that is optimized for support in the
AIX professional workstation environment and their associated
applications. It is 3.3 volt, 32 bit PCI adapter that runs at 33MHz
speed and complies with the Intel AC 1997 Version 2.1 Specifications.
The Audio PCI Adapter for Workstations provides external jacks for
headphones, speaker output, line input, and microphone input as well as
an internal connector for CD or DVD drive audio input.
- Attributes provided: One Audio PCI Adapter with internal and
external audio connectors
- Attributes required: One available PCI slot
- For 7028-6E4: (#8244)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 with May, 2002 update CD or later, AIX
5.2 with May, 2002 update CD or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8700) Quiet Touch Keyboard - Business Black, US English, #103P
- Attributes provided: Quiet and soft-touch key depression,3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8700)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8701) Quiet Touch Keyboard - Business Black, French, #189
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8701)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8702) Quiet Touch Keyboard - Business Black, Italian, #142
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8702)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8703) Quiet Touch Keyboard - Business Black, German/Austrian, #129
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8704) Quiet Touch Keyboard - Business Black, UK English, #166
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8705) Quiet Touch Keyboard - Business Black, Spanish, #172
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8706) Quiet Touch Keyboard - Business Black, Japanese, #194
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8706)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8707) Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8708) Quiet Touch Keyboard - Business Black, Canadian French, #058
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8710) Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8710)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8711) Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8712) Quiet Touch Keyboard - Business Black, Danish, #159
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8713) Quiet Touch Keyboard - Business Black, Bulgarian, #442
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8713)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8714) Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8716) Quiet Touch Keyboard - Business Black, Norwegian, #155
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8718) Quiet Touch Keyboard - Business Black, Portuguese, #163
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8719) Quiet Touch Keyboard - Business Black, Greek, #319
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8720) Quiet Touch Keyboard - Business Black, Hebrew, #212
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8721) Quiet Touch Keyboard - Business Black, Hungarian, #208
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8723) Quiet Touch Keyboard - Business Black, Polish, #214
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8723)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8725) Quiet Touch Keyboard - Business Black, Slovakian, #245
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8725)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8726) Quiet Touch Keyboard - Business Black, Czech, #243
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8726)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8727) Quiet Touch Keyboard - Business Black, Turkish, #179
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8727)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8729) Quiet Touch Keyboard - Business Black, LA Spanish, #171
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8729)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8730) Quiet Touch Keyboard - Business Black, Arabic, #238
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8730)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8733) Quiet Touch Keyboard - Business Black, Korean, #413
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8733)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8734) Quiet Touch Keyboard - Business Black, Chinese/US, #467
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8734)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8735) Quiet Touch Keyboard - Business Black, French Canadian, #445
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8735)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8736) Quiet Touch Keyboard - Business Black, Thailand, #191
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8736)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8738) Quiet Touch Keyboard - Business Black, Russian, #443
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8738)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8739) Quiet Touch Keyboard - Business Black, Croatian, #105
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8739)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8740) Quiet Touch Keyboard - Business Black, US English ISO9995, #103P
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7028-6E4: (#8740)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8741) 3-Button Mouse - Business Black
3-button dynamic tracking pointing device, utilizes opto-mechanical
technology, resolution is 320 DPI, 3-meter cable, Business Black color,
standard 6-pin mini-DIN connection.
- Attributes provided: Mouse capability
- Attributes required: Mouse port
- For 7028-6E4: (#8741)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P
This feature provides a USB attached US English #103P keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8800)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8801) Quiet Touch Keyboard - USB, Business Black, French, #189
This feature provides a USB attached French #189 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8801)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142
This feature provides a USB attached Italian #142 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8802)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8803) Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129
This feature provides a USB attached German/Austrian #129 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8803)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166
This feature provides a USB attached UK English #166 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8804)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172
This feature provides a USB attached Spanish #172 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8805)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194
This feature provides a USB attached Japanese #194 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8806)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275
This feature provides a USB attached Brazilian Portuguese #275
keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8807)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8808) Quiet Touch Keyboard - USB, Business Black, Canadian French, #058
This feature provides a USB attached Canadian French #058 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8808)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8810) Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch, #120
This feature provides a USB attached Belgian/Dutch #120 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8810)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8811) Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153
This feature provides a USB attached Swedish/Finnish #153 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8811)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8812) Quiet Touch Keyboard - USB, Business Black, Danish, #159
This feature provides a USB attached Danish #159 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8812)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8813) Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
This feature provides a USB attached Bulgarian #442 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8813)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8814) Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G
This feature provides a USB attached Swiss/French/German #150F/G
keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8814)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8816) Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
This feature provides a USB attached Norewegian #155 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8816)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8818) Quiet Touch Keyboard - USB, Business Black, Portuguese, #163
This feature provides a USB attached Portuguese #163 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8818)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8819) Quiet Touch Keyboard - USB, Business Black, Greek, #319
This feature provides a USB attached Greek #319 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8819)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8820) Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
This feature provides a USB attached Hebrew #212 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8820)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8821) Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
This feature provides a USB attached Hungarian #208 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8821)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8823) Quiet Touch Keyboard - USB, Business Black, Polish, #214
This feature provides a USB attached Polish #214 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8823)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
This feature provides a USB attached Slovakian #245 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8825)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243
This feature provides a USB attached Czeck #243 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8826)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8827) Quiet Touch Keyboard - USB, Business Black, Turkish, #179
This feature provides a USB attached Turkish #179 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8827)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
This feature provides a USB attached LA Spanish #171 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8829)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8830) Quiet Touch Keyboard - USB, Business Black, Arabic, #238
This feature provides a USB attached Arabic #238 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8830)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8833) Quiet Touch Keyboard - USB, Korean, #413
This feature provides a USB attached Korean #413 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8833)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8834) Quiet Touch Keyboard - USB, Business Black, Chinese/US, #467
This feature provides a USB attached Chinese/US #467 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8834)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445
This feature provides a USB attached French Canadian #445 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8835)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8836) Quiet Touch Keyboard - USB, Business Black, Thai, #191
This feature provides a USB attached Thai #191 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8836)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443
This feature provides a USB attached Russian #443 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8838)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8839) Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105
This feature provides a USB attached Yugoslavian/Latin #105 keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8839)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P
This feature provides a USB attached US English #103P (EMEA) keyboard.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 7028-6E4: (#8840)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8841) Mouse - Business Black with Keyboard Attachment Cable
This feature provides a three button mouse and a cable for attachment
to a keyboard.
- Attributes provided: 3-Button Mouse
- Attributes required: Keyboard with Mouse Attachment Port
- For 7028-6E4: (#8841)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9004) Southern Hemisphere Designator for Monitors
Specifies that southern hemisphere models are required for all
monitors on the initial plant order or on MES orders.
- Attributes provided: None
- Attributes required: Monitor
- For 7028-6E4: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9556) 6 Slot PCI Riser (Initial order only)
This feature number specifies that a 6-slot PCI riser is installed in
a Model 6E4 or 6C4 system ordered from the factory. Also provides an
integrated SE SCSI controller.
(#9575) RIO Ports and LPAR Enablement (Initial order only)
(No Longer Available as of December 5, 2003)
This feature number specifies that: 1) RIO ports are enabled on the
Model 6C4, and 2) LPAR capabilities are enabled on the Model 6C4 and
Model 6E4.
- Attributes provided: Two RIO Ports/LPAR Enablement
- Attributes required: Model 6C4/6E4 system
- For 7028-6E4: (#9575)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7028-6E4: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9718) Language Group Specify - Turkish
Turkish language group for nomenclature and publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7028-6E4: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7028-6E4: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9721) Language Group Specify - Russian
Russian language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for nomenclature and standard
publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9724) Language Group Specify - Czech
Czech language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7028-6E4: (#9724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9800) Power Cord Specify - United States/Canada
The following countries use the #9800 power cord to power the system
unit and/or peripheral features requiring a power cord.
- DOM U.S.
- 649 CANADA
- 832 SAUDI ARABIA
- 619 BAHAMAS
- 621 BARBADOS
- 627 BERMUDA
- 629 BOLIVIA
- 631 BRAZIL
- 661 COLOMBIA
- 663 COSTA RICA
- 681 DOMINICAN REPUBLIC
- 683 ECUADOR
- 829 EL SALVADOR
- 731 GUATEMALA
- 640 GUYANA
- 735 HONDURAS
- 759 JAMAICA
- 781 MEXICO
- 791 NETHERLANDS ANTILLES
- 811 PANAMA
- 843 SURINAM
- 859 TRINIDAD
- 871 VENEZUELA
- 760 JAPAN
- 761 JAPAN (PDS)
- 766 KOREA
- 818 PHILIPPINES
- 858 TAIWAN
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9802) Power Cord Specify - Brazil (125V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9802)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9820)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9821) Power Cord Specify - Denmark (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9821)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9825) Power Cord Specify - United Kingdom (250V, 13A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9825)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9827) Power Cord Specify - Israel (250V, 6-16A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9827)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9828) Power Cord Specify - Switzerland (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9828)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9830) Power Cord Specify - Italy/Chile (250V, 10A and 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9830)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9831) Power Cord Specify - Australia/New Zealand/Argentina (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9831)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9833) Power Cord Specify - Thailand (250V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9833)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9834) Power Cord Specify - Uruguay (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7028-6E4: (#9834)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|
|
|