IBM eServer Advantage Tools

The wide variety of benefits and services offered by the IBM eServer Advantage Tools are available for the IBM eServer pSeries 610 Model 6E1 and IBM eServer pSeries 610 Model 6C1. These tools give you a variety of offerings to help you choose and implement the technology solutions right for your business needs, assure performance and availability levels of your solution, and finance your companies server investment.

• The planning, financing, and purchasing experience for the pSeries 610 Model 6E1 and pSeries 610 Model 6C1 enhanced through IBM eServer Financing Advantage and IBM eServer Capacity Advantage. Flexible financing options augmented with Horizontal and Storage Capacity Upgrade on Demand help provide enhanced investment protection and assist in capacity planning for systems growth to meet the needs of the ever changing e-business environment.

• The IBM eServer Solutions Assurance Advantage offerings, coupled with the range of solution offerings through IBM eServer solution offerings, provide assistance in solution assessment, selection, testing, and implementation to meet the initial and ongoing needs of your e-business environment.

• The IBM eServer Customer Care Advantage and IBM &ES Availability Advantage give you tools to meet your educational needs as well as initial and ongoing support offerings to enhance your e-business experience. Included are offerings such as, High Availability Services, Web-based technical support, availability assessment, and remote service capability.

Microcode Discovery Service

Microcode Discovery Service is a service that allows the customer to determine if the Model 6E1 or Model 6C1 is at the latest microcode level. Using a secure Internet connection and your Web browser, Microcode Discovery Service can capture your machine data and generate a real-time comparison report showing subsystems that may need to be updated.

To update, you must install the Inventory Scout, a new service tool, onto your system. This tool will run as a daemon on your server. The tool will create a file containing the current level of all microcode (adapters, devices, system and support processors) levels in your system. This file will be used to compare your system level codes against the latest available levels on the IBM Web site. You will then receive a report notifying you of any new updates that are available along with a link from which the microcode can be downloaded.

This service will allow you to maintain the Model 6E1 and Model 6C1 microcode at the latest levels to obtain peak performance.

Model 6E1 and Model 6C1

Summary of standard features:

• 1-and 2-way SMP design (One or two, 1-way processor cards)

• 333, 375 or 450 MHz POWER3-II 64-bit processor

• 4 MB of L2 cache per processor on the 333 or 375 MHz processor; 8 MB of L2 cache per processor on the 450 MHz processor

• 512 MB of ECC SDRAM memory:
  • Expandable to 8 GB

• Six available hot-swap disk drive bays with the 375 or 450 MHz processor. Orderable option with the 333 MHz processor.

• Four media bays:
  • One Diskette drive
  • One CD-ROM or DVD-RAM (DVD-RAM not available with 333 MHz processor)
  • One Non hot-swap disk drive (default)
  • One CD-ROM, DVD-RAM, disk drive, or tape drive (optional) (DVD-RAM not available with 333 MHz processor)

• Five PCI slots:
  • Two 64-bit, 3.3 volt, 50 MHz
  • One 64 bit, 5.0 volt, 33 MHz
  • Two 32-bit, 5.0 volt, 33 MHz

• Integrated:
  • Two 10/100 Ethernet (IEEE 802.3 compliant)
  • Two Ultra3 SCSI controllers (internal and external)
  • Service processor

• Ports:
  • Two 10/100 RJ45 Ethernet
  • One parallel
  • Three serial
  • Keyboard
  • Mouse
  • Ultra3 SCSI

• One power supply (consists of two power supply units)

• Support for:
  • 32-bit applications
  • 64-bit applications

• AIX V4.3.3, or 5.1 operating system

The minimum Model 6C1 configuration must include a processor, memory, hard disk, power supply and CD-ROM or DVD-RAM with the appropriate cables. The defaults, if no choice is made, are as follows:

• Processor: 1-way, 333 MHz (#5322)
• Memory: 512 MB memory DIMM (#4120)
• Disk drive: 18.2 GB hard drive (#3102)
• CD-ROM: (#2633)
• Power supply: 2 of #6277 (mandatory)
• Cables: (#4246 and #4259)

The minimum Model 6C1 default configuration with the 375 or 450 MHz processor is as follows:

• Processor: 1-way, 375 MHz (#5300)
• Memory: 512 MB memory DIMM (#4120)
• SCSI Backplane (#6567)
• Disk drive: 18.2 GB hard drive (#3102)
• CD-ROM: (#2633)
• Power supply: 2 of #6277 (mandatory)
• Cables: (#4246 and #4247)

A keyboard, mouse, graphics adapter, and monitor are available as options.

HACMP Solution

For even greater availability and reliability, the Model 6E1 and Model 6C1 also support IBM High Availability Cluster Multiprocessing (HACMP) software, the leading UNIX disaster recovery clustering solution. This solution, when combined with applications that meet IBM's ClusterProven standards, provides a superior base for high availability, an essential ingredient of e-commerce.

Reliability, Availability, and Serviceability (RAS)

Reliability, Fault Tolerance, and Data Integrity

The reliability of the Model 6E1 and Model 6C1 system starts with reliable components, devices, and sub-systems. During the design and development process, sub-systems go through rigorous verification and integration testing processes. During system manufacturing, systems go through a thorough testing process to ensure highest product quality level.

The Model 6E1 and Model 6C1 system L2 Cache and system memory offers ECC (error checking and correcting) fault-tolerant features. ECC is designed to correct environmentally induced single-bit intermittent memory failures and single-bit hard failures. With ECC, the likelihood of memory failures will be substantially reduced. ECC also provides double-bit memory error detection that helps protect data integrity in the event of a double-bit memory failure. System memory also provides 4-bit packet error detection that helps to protect data integrity in the event of a DRAM chip failure. The system bus, I/O bus, and PCI buses are designed with parity error detection.

Disk mirroring and disk controller duplexing capability are also provided by the AIX operating system.

The Journaled File System of the AIX operating system maintains file system consistency and reduces the likelihood of data loss when the system is abnormally halted due to a power failure.

Service Processor

A Service Processor included in the Model 6E1 and Model 6C1 gives you an immediate means to diagnose, check status, and sense operational conditions of a remote system, even when the main processor is inoperable.

The Service Processor enables firmware and operating system surveillance, several remote power controls, environmental monitoring, reset, and boot features along with remote maintenance and diagnostic activities, including console mirroring. The Service Processor can place calls to report surveillance failures, critical environmental faults, and critical processing faults.

Fault Monitoring Functions

• BIST (Built-in self-test) and POST (Power-on self-test) check processor, L2 cache, memory, and associated hardware required for proper booting of the operating system, every time the system is powered on. If a non-critical error is detected or if the errors occur in the resources that can be removed from the system configuration, the booting process is designed to proceed to completion. The errors are logged in the system non-volatile RAM (NVRAM).

• Disk drive fault tracking can alert the system administrator of an impending disk failure before it impacts customer operation.

• AIX log facility (where hardware and software failures are recorded and analyzed by Error Log Analysis (ELA) routine) provides warning to the system administrator on the causes of system problems. This also enables IBM service representatives to bring along probable replacement hardware components when a service call is placed, thus minimizing system repair time.

Mutual Surveillance

The Service Processor can monitor the operation of the firmware during the boot process, and it can monitor the operating system for loss of control. It also allows the operating system to monitor for Service Processor activity. The Service Processor can take appropriate action, including calling for service, when it detects the firmware or the operating system has lost control. Likewise, the operating system can request a Service Processor repair action if necessary.

Environmental Monitoring Functions

• Temperature monitoring designed to increase the fan speed rotation when ambient temperature is above the normal operating range.

• Temperature monitoring designed to warn the system administrator of potential environmental related problems (for example, air conditioning and air circulation around the system) so that appropriate corrective actions can be taken before a critical failure threshold is reached, and to provide orderly system shutdown when operating temperature exceeds the critical level.

• Fan speed monitoring designed to provide warning and an orderly system shutdown when the speed is out of operational specification.

• Voltage monitoring designed to provide warning and an orderly system shutdown when the voltages are out of operational specification.

Error Handling and Reporting

In the unlikely event of system hardware or environmentally-induced failure, the system "Run-time Error Capture" capability is designed to systematically analyze the hardware error signature to determine the cause of failure. The analysis result will be stored in system NVRAM. When the system can be successfully rebooted either manually or automatically, the error will be reported to the AIX operating system. Error Log Analysis (ELA) can be used to display the failure cause and the physical location of failing hardware.

With the integrated Service Processor, the system has the ability to send out automatically an alert via phone line to a pager or call for service in the event of critical system failure. A hardware fault will also turn on the two "Attention Indicators" (one located on the front of the system unit and the other on the rear of the system unit) to alert the user of an internal hardware problem. The indicator may also be turned on by the operator as a tool to allow system identification. For identification, the indicator will flash while an error condition will cause the indicator to be on solid.

Availability Enhancement Functions

• On-line (Concurrent) Diagnostics with ELA and Service Aids allows administrators or IBM service representatives to diagnose potential system malfunctions without interrupting end-user operation.

• The auto-restart (reboot) option, when enabled, can reboot the system automatically following an unrecoverable software error, software hang, hardware failure, or environmentally-induced (AC power) failure.

Serviceability

The Model 6E1 and Model 6C1 are designed for customer setup of the machine and for subsequent addition of most features (adapters/devices). For a fee, IBM Service can perform the installation.

• The Model 6E1 and Model 6C1 have been designed to allow customers to replace service parts (Customer Replaceable Unit) if they desire to do so. To accomplish this, the Model 6E1 and Model 6C1 have incorporated a System Indicator Panel which contains a group of LEDs which will indicate the failing FRU (i.e. IO backplane, etc.) or the functional area of the system that is experiencing the fault (i.e. power supplies, processors, memory, fans, etc.). Any one of the functional area LEDs being ON will direct the user and/or service personnel to the physical area of the system where they should find an additional fault indicator in the ON state which indicates that the component or FRU is responsible for the current fault.

• The Model 6E1 and Model 6C1 allow support personnel to remotely log into a system to review error logs and perform remote maintenance. The Model 6E1 and Model 6C1 Service Processor enables the analysis of a system that will not boot.

• The diagnostics consist of Stand-alone Diagnostics, which are loaded from the CD-ROM drive, and Online Diagnostics.

• Online Diagnostics, when installed, are resident with AIX on the disk or system. They can be booted in single-user mode (service mode), run in maintenance mode, or run concurrently (concurrent mode) with other applications. They have access to the AIX Error Log and the AIX Configuration Data.

  • Service mode allows checking of system devices and features.

  • Concurrent mode allows the normal system functions to continue while selected resources are being checked.

  • Maintenance mode allows checking of most system resources.

• The System Management Services (SMS) error log is accessible from the SMS menu for tests performed through SMS programs. The Service Processor error log is accessible from the Service Processor menu for results of Service Processor tests.

Electronic Service Agent

The Electronic Service Agent is available at no additional charge. When installed on the pSeries, the Electronic Service Agent can enhance IBM's ability to provide the system with maintenance service.

The Electronic Service Agent:

• Monitors and analyzes system errors, and if needed, can place automatically a service call to IBM without customer intervention.

• Can reduce the effect of business disruptions due to unplanned system outages and failures.

• Performs problem analysis on a subset of hardware-related problems and, with customer authorization, can report automatically the results to IBM Service.

Online Customer Support (OCS)

OCS for hardware problem reporting may be performed via remote login by pSeries specialists using normal AIX facilities. The Electronic Service Agent software can also be used for this capability.

AIX Support offerings will be under AIXSERV and Electronic Service Agent.
Back to top
 

Product Positioning

With its performance, and SMP capability, the Model 6E1 and Model 6C1 are well positioned for transaction-intensive server solutions such as, e-commerce, database, and application database server applications. The Model 6E1 and Model 6C1 provide 2-way SMP capability, up to 8 GB of memory, and up to 587.2 GB internal DASD, which makes it an excellent solution for many commercial applications. It is a cost-effective performance alternative to the RS/6000 7025 Models F50 or F80, or 7026 Models H70 or H80 for commercial customers who do not require the expansion capabilities that these models offer. The Model 6E1 and Model 6C1 also offer a variety of high-availability features such as: An integrated service processor Hot-swap redundant power supply (AC) Processor de-allocation Hot-swap cooling fans and disk drives A programmable "beacon" that can be triggered remotely to quickly alert an on-site technician to the system that needs maintenance or repair (Model 6C1 only) Light Path Diagnostics Back to top   Model Model Summary Matrix Model Processor Type Clock Rate System Memory Internal Storage Slots/Bays Type 6C1 POWER3-II 333 MHZ 512MB/8GB 18.2/587.2 GB 5/4 Rack-mount 6C1 POWER3-II 375/450MHz 512MB/8GB 18.2/587.2 GB 5/10 Rack-mount Customer Setup (CSU) Yes. Devices Supported The following external machine types are supported on the indicated models for MT 7028. This list is not all inclusive. Many devices are supported through standard ports. Please refer to the sales manual of the external machine type and the list of supported devices in the appropriate section of the AIX sales manual for further attach support information. |6| X = SUPPORTED DEVICE |C| |1| MT-MOD | | DESCRIPTION ---------|-|----------------------------------------- ---------+----------SWITCH--------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2031-016 |X| McDATA Model 016 Departmental ES-3032 Fabric Switch 2031-032 |X| McDATA Model 032 Departmental ES-3032 Fabric Switch 2031-L00 |X| McDATA Model L00 ES-1000 Loop Switch 2032-001 |X| McDATA ED-5000 Enterprise Fibre Channel Switch 2032-064 |X| McDATA Model 064 Enterprise Fibre Channel Director 2042-001 |X| Inrange FC/9000 64-port Fibre Channel Director 2042-128 |X| Inrange FC/9000 128-port Fibre Channel Director 2109-F16 |X| IBM SAN Fibre Channel Switch Model F16 2109-S08 |X| IBM SAN Fibre Channel Switch Model S08 2109-S16 |X| IBM SAN Fibre Channel Switch Model S16 | | ---------+----------DISK----------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2102-D00 |X| IBM Expandable Storage Unit 2102-F10 |X| IBM Fibre Channel Raid Storage Server 2104-DL1 |X| IBM Expandable Storage Plus Model DL1 2104-DU3 |X| Expandable Storage Plus Model DU3 2104-TL1 |X| IBM Expandable Storage Plus Model TL1 2104-TU3 |X| Expandable Storage Plus Model TU3 2105-E10 |X| IBM Enterprise Storage Server Model E10 2105-E20 |X| IBM Enterprise Storage Server Model E20 2105-F10 |X| IBM Enterprise Storage Server Model F10 2105-F20 |X| IBM Enterprise Storage Server Model F20 7131-105 |X| IBM Multi-Storage Tower Model 105 7131-405 |X| IBM Multi-Storage Tower Model 405 7133-010 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem | | Model 010 7133-020 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem | | Model 020 7133-500 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem | | Model 500 7133-600 |X| IBM Serial Storage Architecture (SSA) Disk Subsystem | | Model 600 7133-D40 |X| IBM Serial Disk System Advanced Model D40 7133-T40 |X| IBM Serial Disk System Advanced Model T40 7137-412 |X| IBM Disk Array Subsystem Model 412 7137-413 |X| IBM Disk Array Subsystem Model 413 7137-414 |X| IBM Disk Array Subsystem Model 414 7137-415 |X| IBM Disk Array Subsystem Model 415 7203-001 |X| IBM RS/6000 External Portable Disk Drive Model 001 7204-010 |X| 1 GB Disk Drive 7204-112 |X| 1.1 GB Fast/Wide Disk Drive 7204-113 |X| IBM RS/6000 External Disk Drive Model 113 7204-114 |X| IBM RS/6000 External Disk Drive Model 114 7204-118 |X| IBM 7204 18.2 GB External Disk Drive Model 118 7204-139 |X| IBM RS/6000 External Disk Drive Model 139 7204-215 |X| 2 GB Differential Disk Drive 7204-315 |X| IBM RS/6000 External Disk Drive Model 315 7204-317 |X| IBM RS/6000 External Disk Drive Model 317 7204-325 |X| IBM RS/6000 External Disk Drive Model 325 7204-339 |X| IBM RS/6000 External Disk Drive Model 339 7204-402 |X| IBM External Disk Drive Model 402 7204-404 |X| IBM External Disk Drive Model 404 7204-409 |X| IBM 9.1 GB External Disk Drive Model 409 7204-418 |X| IBM 7204-418 18GB DE External Disk Drive 7204-419 |X| IBM 18.2 GB External Disk Drive Model 419 7204-518 |X| IBM 7204 Model 518 18.3 GB External Disk Drive 7204-536 |X| IBM 7204 Model 536 36.7 GB External Disk Drive | | ---------+----------GRAPHICS RELATED----------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 6093-011 |X| CursorPad Tablet 6093-012 |X| Large Tablet 6093-021 |X| IBM Tablet Model 021 6094-010 |X| Dials 6094-020 |X| LPF Keyboard 6094-030 |X| Spaceball 6094-031 |X| Spaceball 6094-040 |X| Spaceball 6094-600 |X| Magellan Enhanced Input Device 7250-002 |X| POWER GXT1000 Graphics Accelerator | | ---------+----------DISPLAYS------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 6546-00E |X| G52 Display 6546-00N |X| G52 Display 6546-01E |X| G52 Display 6546-01S |X| G52 Display 6546-0AE |X| G54 Display 6546-0AN |X| G54 Display 6546-0BE |X| G54 Display 6546-0BN |X| G54 Display 6546-0BS |X| G54 Display 6546-21N |X| G52 Display 6546-2BN |X| G54 Display 6546-31N |X| G52 Display 6546-4AN |X| G54 Display 6546-6BN |X| G54 Display 6555-763 |X| P70 17" COLOR DISPLAY 6555-764 |X| P70 17" COLOR DISPLAY 6555-773 |X| P200 UV-N COLOR MONITOR 6555-774 |X| P200 UV-N COLOR MONITOR 6555-803 |X| P201 UV-N COLOR MONITOR 7316-TF1 |X| IBM 7316-TF1 Rack Mounted Flat Panel Display 9513-AG2 |X| IBM T55A 15" TFT LCD COLOR MONITO 9513-AW1 |X| IBM T55A 15" TFT LCD COLOR MONITOR 9516-B03 |X| 16.1" TFT LCD DISPLAY 9516-B04 |X| 16.1" TFT LCD DISPLAY | | ---------+----------STORAGE NETWORK DEVICES---------- - - - - -|-|- - - - BUS CONVERTER - - - - - - - - - - 2108-G07 |X| IBM Storage Area Network Data Gateway Model G07 - - - - -|-|- - - - ROUTER- - - - - - - - - - - - - - 2108-R03 |X| IBM Storage Area Network Data Gateway Model R03 | | ---------+----------SCSI DEVICES--------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 3995-C60 |X| IBM Optical Library Dataserver 3995-C62 |X| IBM Optical Library Dataserver 3995-C64 |X| IBM Optical Library Dataserver 3995-C66 |X| IBM Optical Library Dataserver 3995-C68 |X| IBM Optical Library Dataserver 7209-002 |X| IBM Optical Disk Drive Model 002 7209-003 |X| IBM Multifunction Optical Disk Drive Model 003 7210-005 |X| IBM External CD-ROM Drive Model 005 7210-010 |X| IBM External CD-ROM Drive Model 010 7210-015 |X| IBM CR-ROM Model 015 7210-020 |X| IBM CR-ROM Model 020 7210-025 |X| 4.7GB DVDRAM Drive 7212-102 |X| STORAGE DEVICE ENCLOSURE (SAM BASS) | | ---------+----------TAPE----------------------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 3490-F00 |X| IBM Magnetic Tape Subsystem Model F00 3490-F01 |X| IBM Magnetic Tape Subsystem Model F01 3490-F11 |X| IBM Magnetic Tape Subsystem Model F11 3494-B10 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B10 3494-B18 |X| IBM Magstar Virtual Tape Server Model B18 3494-B20 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B20 3494-D12 |X| IBM Magstar Tape Library Model D12 3494-L12 |X| IBM Magstar Tape Library Model L12 3570-B00 |X| IBM Magstar MP Tape Subsystem Model B00 3570-B01 |X| IBM Magstar MP Tape Subsystem Model B01 3570-B02 |X| IBM Magstar MP Tape Subsystem Model B02 3570-B11 |X| IBM Magstar MP Tape Subsystem Model B11 3570-B12 |X| IBM Magstar MP Tape Subsystem Model B12 3570-B1A |X| IBM Magstar MP Tape Drive Model B1A 3570-C00 |X| IBM Magstar MP Tape Drive Model C00 3570-C01 |X| IBM Magstar MP Tape Drive Model C01 3570-C02 |X| IBM Magstar MP Tape Drive Model C02 3570-C11 |X| IBM Magstar MP Tape Drive Model C11 3570-C12 |X| IBM Magstar MP Tape Drive Model C12 3575-L06 |X| IBM Magstar MP Tape Library Dataserver Model L06 3575-L12 |X| IBM Magstar MP Tape Library Dataserver Model L12 3575-L18 |X| IBM Magstar MP Tape Library Dataserver Model L18 3575-L24 |X| IBM Magstar MP Tape Library Dataserver Model L24 3575-L32 |X| IBM Magstar MP Tape Library Dataserver Model L32 3580-H11 |X| Linear Tape Open (LTO) Bridge Box (HVD) 3580-H23 |X| IBM TotalStorage Ultrium 2 Tape Drive 3580-L11 |X| Linear Tape Open (LTO) Bridge Box (LVD) 3580-L23 |X| IBM TotalStorage Ultrium 2 Tape Drive 3581-H17 |X| Linear Tape Open (LTO) Autoloader (HVD) 3581-L17 |X| Linear Tape Open (LTO) Autoloader (LVD) 3581-H23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader 3581-L23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader 3583-L18 |X| Linear Tape Open (LTO) Tape Library - Scalable 3583-L36 |X| Linear Tape Open (LTO) Tape Library - Scalable 3583-L72 |X| Linear Tape Open (LTO) Tape Library - Scalable 3584-D22 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model D22 Expansion Frame 3584-D32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - Base | | Frame 3584-D42 |X| IBM UltraScalable Tape Library Model D42 3584-D52 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model D52 Expansion Frame 3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1 3584-L22 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model L22 Base Frame 3584-L32 |X| IBM Ultrium 3584 Ultra-Scalable Tape Library - | | Expansion Frame 3584-L52 |X| IBM TotalStorage UltraScalable Tape Library | | 3584 Model L52 Base Frame 3590-B11 |X| IBM Magstar Tape Subsystem Model B11 3590-B1A |X| IBM Magstar Tape Subsystem Model B1A 3590-C12 |X| IBM Magstar Silo Compatible Frame Model C1A 3590-E11 |X| Magstar Tape Subsystem 3590-E1A |X| Magstar Tape Subsystem 3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11 3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A 7205-311 |X| IBM 35 GB External Digital Linear Tape Drive Model 311 7206-005 |X| IBM External 4MM Tape Drive Model 005 7206-110 |X| IBM 12GB External 4MM DDS-3 Tape Drive Model 110 7206-220 |X| IBM 20GB External 4MM DDS-4 Tape Drive Model 220 7206-VX2 |X| IBM 7206 Model VX2 External Tape Drive 7207-011 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive | | Model 011 7207-012 |X| IBM RS/6000 1/4-inch External Cartridge Tape Drive | | Model 012 7207-122 |X| IBM 4GB External SLR5 QIC Tape Drive Model 122 7207-315 |X| IBM RS/6000 13GB 1/4-inch Tape Drive Model 315 7208-011 |X| IBM External 8MM Tape Drive Model 011 7208-341 |X| IBM 20GB External 8MM Tape Drive Model 341 7208-345 |X| IBM 7208 Model 345 60GB External 8MM Tape Drive 7331-205 |X| IBM 8MM Tape Library Model 205 7331-305 |X| IBM 8MM Tape Library Model 305 7332-005 |X| IBM 4MM DDS-2 Tape Autoloader Model 005 7332-110 |X| IBM 4MM DDS-3 Tape Cartridge Autoloader Model 110 7332-220 |X| IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220   |6| X = SUPPORTED DEVICE |C| |1| MT-MOD | | DESCRIPTION ---------|-|----------------------------------------- 7334-410 |X| IBM 7334 Model 410 8MM Tape Library (MAM2 4x30) 7336-205 |X| IBM 4MM Tape Library Model 205 7337-305 |X| IBM Digital Linear Tape Library Model 305 7337-306 |X| IBM Digital Linear Tape Library Model 306 7337-360 |X| IBM 7337 Digital Linear Tape Library Model 360 9348-012 |X| IBM Magnetic Tape Unit Model 012 | | ---------+----------EXPANSION CABINETS--------------- - - - - -|-|- - - - - - - - - - - - - - - - - - - - - 2032-C36 |X| McDATA Model 0C3 FC-512 Cabinet for McDATA Directors | | and Fabric Switch 2042-C40 |X| Inrange 40U Cabinet 7014-S00 |X| 1.6 Meter System Rack - 32U 7014-T00 |X| 1.8 Meter System Rack - 36U 7014-T42 |X| 2.0 Meter System Rack - 42U   The following feature availability matrix for MT 7028 uses the letter "A" to indicate features that are available and orderable on the specified models. "S" indicates a feature that is supported on the new model during a model conversion; these features will work on the new model, but additional quantities of these features cannot be ordered on the new model; they can only be removed. "N" indicates that the feature is not supported on the new model and must be removed during the model conversion. As additional features are announced, supported, or withdrawn, this list will be updated. Please check with your Marketing Representative for additional information. |6| A = AVAILABLE S = SUPPORTED |C| N = NOT SUPPORTED, MUST BE REMOVED |1| FEAT/PN | | DESCRIPTION --------|-|----------------------------------------- 0001 |A| After-market (MES) Order Indicator 0516 |S| 1-Way 450MHz POWER3-II Processor, Infrastructure Solutions, | | Factory Only 0703 |S| Solution Indicator 0704 |S| HA Solution Indicator 0986 |A| CCS Customer Service Specify (US) 1736 |S| Expedited Delivery Service Indicator 2114 |A| PCI SCSI Adapter 16-Bit Differential External Y Cable 2115 |S| PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable 2116 |S| PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext | | Device Cable 2118 |A| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M 2424 |S| 0.6M 16-bit SCSI-2 System to System Cable 2425 |A| 2.5M 16-bit SCSI-2 System to System Cable 2456 |A| LC-SC 50 Micron Fibre Converter Cable 2459 |A| LC-SC 62.5-Micron Fiber Converter Cable 2498 |S| PCI 4-Channel Ultra3 SCSI RAID Adapter 2623 |S| 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel) 2633 |S| IDE CD-ROM Drive (Black bezel) 2634 |S| 16X/48X(max) IDE DVD-ROM Drive 2709 |S| ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable 2710 |S| ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable 2732 |S| IBM Short-wave Serial HIPPI PCI Adapter for RS/6000 2733 |S| IBM Long-wave Serial HIPPI PCI Adapter for RS/6000 2751 |S| S/390 ESCON Channel PCI Adapter 2848 |S| POWER GXT135P Graphics Accelerator 2849 |A| POWER GXT135P Graphics Accelerator with Digital Support 2861 |A| ARTIC960Hx 4-Port EIA-232 Cable 2863 |A| ARTIC960Hx 4-Port X.21 Cable 2864 |A| ARTIC960Hx 4-Port V.35 (DTE) Cable 2871 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable 2872 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable 2873 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port | | Cable 2874 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M | | Extension Cable 2875 |S| IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, | | 1.8M 4-Port Cable 2877 |A| IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable 2934 |A| Asynchronous Terminal/Printer Cable EIA-232 2936 |A| Asynchronous Cable EIA-232/V.24 2943 |A| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus 2944 |S| 128-Port Asynchronous Controller, PCI bus 2946 |S| Turboways 622 Mbps PCI MMF ATM Adapter 2947 |A| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter 2951 |S| Cable, V.24 / EIA-232 2952 |S| Cable, V.35 2953 |S| Cable, V.36 / EIA-499 2954 |S| Cable, X.21 2962 |S| 2-Port Multiprotocol PCI Adapter 2969 |S| Gigabit Ethernet - SX PCI Adapter 2975 |S| 10/100/1000 Base-T Ethernet PCI Adapter 3102 |S| 18.2 GB 10,000 RPM Ultra SCSI Disk Drive 3118 |S| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive 3119 |S| 36.4GB 10,000 RPM Ultra SCSI Disk Drive 3124 |A| Serial to Serial Port Cable for Drawer/Drawer 3125 |A| Serial to Serial Port Cable for Rack/Rack 3263 |S| 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3264 |S| 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3265 |A| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3276 |S| 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly 3280 |S| 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly 3281 |S| 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly 3627 |S| IBM P76/P77 Color Monitor, Business Black, Captured Cable 3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable 3635 |S| T210 Flat-Panel Monitor 3636 |A| L200P Flat Panel Monitor 3637 |A| IBM T541H/L150p 15" TFT Color Monitors, Business Black, | | Captured Cable 3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable 3639 |S| IBM ThinkVision L170p Flat Panel Monitor 3640 |A| IBM ThinkVision L171p Flat Panel Monitor 3642 |A| ThinkVision L191p Flat Panel Monitor 3752 |A| Service Package 3925 |A| Serial Port Converter Cable, 9-Pin to 25-Pin 3926 |A| Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M 4120 |S| 512MB (2x256MB) DIMMs, 200-pin 10NS SDRAM 4121 |A| 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM 4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15 | | pin D-shell) 4246 |S| IDE 2-Drop Connector Cable 4247 |S| SCSI 2-Drop Cable: Integrated SCSI to SCSI Backplane | | and Bolt-in Disk 4248 |S| SCSI Connector Cable and Repeater Card 4249 |S| 3-Drop Cable: Backplane to Media Bays/Bolt-in Disk 4258 |S| SCSI Cable, PCI Adapter to Hot-Swap Disks 4259 |S| 3-Drop Cable: Integrated SCSI to Media | | Bays/Bolt-in Disk 4353 |S| H-100 Bus 8-position Cable 4953 |S| IBM 64bit/66MHz PCI ATM 155 UTP Adapter 4957 |S| IBM 64bit/66MHz PCI ATM 155 MMF Adapter 4959 |S| IBM Token-Ring PCI Adapter 4960 |A| IBM e-business Cryptographic Accelerator 4961 |S| IBM Universal 4-Port 10/100 Ethernet Adapter 4962 |S| 10/100 Mbps Ethernet PCI Adapter II 4963 |N| PCI Cryptographic Coprocessor (FIPS-4) 4964 |A| PCI Cryptographic Coprocessor 5001 |A| Customer Service Specify 5005 |A| Software Preinstall 5300 |S| 1-Way 375MHz POWER3-II Processor Card 5309 |S| 1-way 450MHz POWER3-II Processor Card 5322 |S| 1-Way 333MHz POWER3-II Processor Card 5700 |A| IBM Gigabit Ethernet-SX PCI-X Adapter 5701 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter 5703 |A| PCI-X Dual Channel Ultra320 SCSI RAID Adapter 5706 |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter 5707 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter 5712 |S| PCI-X Dual Channel Ultra320 SCSI Adapter 6120 |A| IBM 80/160 GB Internal Tape Drive with VXA Technology 6134 |N| 60/150 GB 16-bit 8mm Internal Tape Drive 6156 |S| 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel) 6158 |A| 20/40GB 4mm Internal Tape Drive 6203 |S| PCI Dual Channel Ultra3 SCSI Adapter 6204 |S| PCI Universal Differential Ultra SCSI Adapter 6206 |S| PCI Single-Ended Ultra SCSI Adapter 6228 |S| 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus 6230 |S| Advanced SerialRAID Plus Adapter 6231 |S| 128 MByte DRAM Option Card 6235 |S| 32 MByte Fast-Write Cache Option Card 6239 |S| 2 Gigabit Fibre Channel PCI-X Adapter 6275 |S| Power Supply, 250 Watt AC, Hot-swap, Redundant 6277 |S| Power Supply, 250 Watt AC, Hot-swap, Base and Redundant 6310 |S| IBM ARTIC960RxD Quad Digital Trunk PCI Adapter 6566 |S| Mounting Hardware for Disk in Media Bay 6567 |S| Ultra3 SCSI Backplane for Hot-swap Disks 7305 |A| AAP Software Pre-Install Indicator 7779 |A| OEM Publications for IBM Logo Product 8091 |S| 1-way 450MHz POWER3-II Processor Card, Express | | Configurations, Factory Only 8092 |S| 1-way 450MHz POWER3-II Processor Card, Express | | Configurations, Factory Only 8093 |S| 1024MB (2x512MB) DIMMs, Express Configurations, | | Factory Only 8094 |S| 1024MB (2x512MB) DIMMs, Express Configurations, | | Factory Only 8095 |S| 1024MB (2x512MB) DIMMs, Express Configurations, | | Factory Only 8096 |S| Express Configuration -- pSeries 610 (100C/100E) 8097 |S| Express Configuration -- pSeries 610 (200C/200E) 8098 |S| Express Configuration -- pSeries 610 (250C/250E) 8099 |S| Express Configuration -- pSeries 610 (125C/125E) RAID | | Applications 8131 |A| 128-Port Asynchronous Controller Cable, 4.5 Meter 8132 |A| 128-Port Asynchronous Controller Cable, 23cm (9-Inch) 8133 |A| RJ-45 to DB-25 Converter Cable 8136 |S| Rack Mountable Remote Asynchronous Node 16-Port EIA-232 8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232 8700 |A| Quiet Touch Keyboard - Business Black, US English, #103P 8701 |A| Quiet Touch Keyboard - Business Black, French, #189 8702 |A| Quiet Touch Keyboard - Business Black, Italian, #142 8703 |A| Quiet Touch Keyboard - Business Black, German/Austrian, #129 8704 |A| Quiet Touch Keyboard - Business Black, UK English, #166 8705 |A| Quiet Touch Keyboard - Business Black, Spanish, #172 8706 |A| Quiet Touch Keyboard - Business Black, Japanese, #194 8707 |A| Quiet Touch Keyboard - Business Black, Brazilian | | Portuguese, #275 8708 |A| Quiet Touch Keyboard - Business Black, Canadian French, #058 8709 |S| Quiet Touch Keyboard - Business Black, Belgian/French, #120 8710 |A| Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, | | #120 8711 |A| Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153 8712 |A| Quiet Touch Keyboard - Business Black, Danish, #159 8713 |A| Quiet Touch Keyboard - Business Black, Bulgarian, #442 8714 |A| Quiet Touch Keyboard - Business Black, | | Swiss,French/German, #150f/g 8716 |A| Quiet Touch Keyboard - Business Black, Norwegian, #155 8717 |S| Quiet Touch Keyboard - Business Black, Dutch, #143 8718 |A| Quiet Touch Keyboard - Business Black, Portuguese, #163 8719 |A| Quiet Touch Keyboard - Business Black, Greek, #319 8720 |A| Quiet Touch Keyboard - Business Black, Hebrew, #212 8721 |A| Quiet Touch Keyboard - Business Black, Hungarian, #208 8722 |S| Quiet Touch Keyboard - Business Black, Icelandic, #197 8723 |A| Quiet Touch Keyboard - Business Black, Polish, #214 8724 |S| Quiet Touch Keyboard - Business Black, Romanian, #446 8725 |A| Quiet Touch Keyboard - Business Black, Slovakian, #245 8726 |A| Quiet Touch Keyboard - Business Black, Czech, #243 8727 |A| Quiet Touch Keyboard - Business Black, Turkish, #179 8728 |S| Quiet Touch Keyboard - Business Black, Turkish, #440 8729 |A| Quiet Touch Keyboard - Business Black, LA Spanish, #171 8730 |A| Quiet Touch Keyboard - Business Black, Arabic, #238 8732 |S| Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118 8733 |A| Quiet Touch Keyboard - Business Black, Korean, #413 8734 |A| Quiet Touch Keyboard - Business Black, Chinese/US, #467 8735 |A| Quiet Touch Keyboard - Business Black, French Canadian, #445 8736 |A| Quiet Touch Keyboard - Business Black, Thailand, #191 8738 |A| Quiet Touch Keyboard - Business Black, Russian, #443 8739 |A| Quiet Touch Keyboard - Business Black, Croatian, #105 8740 |A| Quiet Touch Keyboard - Business Black, US English ISO9995, | | #103P 8741 |A| 3-Button Mouse - Business Black 9004 |A| Southern Hemisphere Designator for Monitors 9300 |A| Language Group Specify - US English 9703 |A| Language Group Specify - French 9704 |A| Language Group Specify - German 9705 |A| Language Group Specify - Polish 9707 |A| Language Group Specify - Portuguese 9708 |A| Language Group Specify - Spanish 9711 |A| Language Group Specify - Italian 9712 |A| Language Group Specify - Canadian French 9714 |A| Language Group Specify - Japanese 9715 |A| Language Group Specify - Traditional Chinese (Taiwan) 9716 |A| Language Group Specify - Korean 9719 |A| Language Group Specify - Hungarian 9720 |A| Language Group Specify - Slovakian 9721 |A| Language Group Specify - Russian 9722 |A| Language Group Specify - Simplified Chinese (PRC) 9724 |A| Language Group Specify - Czech 9800 |A| Power Cord Specify - United States/Canada 9802 |A| Power Cord Specify - Brazil (125V, 15A) 9820 |A| Power Cord Specify - Belgium, Finland, France (250V, 16A) 9821 |A| Power Cord Specify - Denmark (250V, 10A) 9825 |A| Power Cord Specify - United Kingdom (250V, 13A) 9827 |A| Power Cord Specify - Israel (250V, 6-16A) 9828 |A| Power Cord Specify - Switzerland (250V, 10A) 9829 |A| Power Cord Specify - South Africa/Pakistan (250V, 16A) 9830 |A| Power Cord Specify - Italy (250V, 10A and 16A) 9831 |A| Power Cord Specify - Argentina (250V, 10A) 9833 |A| Power Cord Specify - Thailand (250V, 15A) 9834 |A| Power Cord Specify - Uruguay (250V, 10A) 9900 |A| Power Cord (4M) Specify -- United States/Canada 9901 |A| Power Cord (4M) Specify -- EMEA 9902 |A| Power Cord (4M) Specify -- Denmark 9903 |A| Power Cord (4M) Specify -- U.K. and Others 9904 |A| Power Cord (4M) Specify -- Israel 9905 |A| Power Cord (4M) Specify -- Switzerland 9906 |A| Power Cord (4M) Specify -- India and Others 9907 |A| Power Cord (4M) Specify -- Italy 9908 |A| Power Cord (4M) Specify -- Australia and Others 9909 |A| Power Cord (4M) Specify -- Thailand 9911 |A| Power Cord (4M) Specify -- All (Standard rack power cord) Model Conversions None. Back to top   Technical Description Physical Specifications Operating Environment Limitations Hardware Requirements Software Requirements Physical Specifications Tower: Width: 215 mm (08.5 in) Depth: 617 mm (24.0 in) Height: 426 mm (16.8 in) Rack - Mount: Width: 426 mm (16.8 in) Depth: 617 mm (24.0 in) Height: 215 mm (08.5 in) Weight: 35.5 kg (78.0 lb) - Minimum Configuration 43.1 kg (94.8 lb) - Maximum Configuration Operating Environment Temperature: (Operating) 16 to 32 degrees C (60.8 to 89.6 F) Relative humidity: 8 % to 80 % Maximum wet bulb: (Power Off) 27 degrees C (80 F) Operating voltage: 100 to 127 or 200 to 240 V ac (auto-ranging) Operating frequency: 47/63 Hz Power requirements: 300 watts (typical); 450 watts (maximum) Thermal output: 400 Btu/hour (typical); 794 Btu/hour (maximum) Power source loading: 0.30 kVA (typical configuration) 0.50 kVA (maximum configuration) Maximum altitude: 2,135 m (7,000 ft) Noise Level and Sound Power Sound Power: Model 6C1 6.1 Bels Idle/6.4 Bels Operating EMC Conformance Classification This equipment is subject to FCC rules and it shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution. U.S.A.: FCC Class B for Tower; FCC Class A for Rack Mount Europe: CISPR 22 Class B for Tower; CISPR 22 Class A for Rack Mount Japan: VCCI-B for Tower; VCCI-A for Rack Mount Korea: Korean Requirement Class B for Tower; Class A for Rack Mount China: People's Republic of China commodity inspection law Homologation -- Telecom Environmental Testing (Safety and EMC) Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude. This IBM pSeries model and applicable features meet the environmental testing requirements of the country TELECOM and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom Regulatory authority. Product Safety/Country Testing/Certification UL 1950 Underwriters Laboratory, Safety Information CSA C22.2 No. 950-M86 EN60950 European Norm ENN55022: 1998 (Class B for Tower; Class A for Rack) EN55024 EN61000-3-2 EN61000-3-3 IEC 950, Edition 1, International Electrotechnial Commission, Safety Information Nordic deviations to IEC-950 1st Edition, as outlined in document EMKO-TSE(05-SEC) 200/93 General Requirements The product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).   Limitations Processor cards 1-way (#5322) 333 MHz POWER3-II processor, 1-way (#5300) 375 MHz POWER3-II processor, and 1-way (#5309) 450 MHz POWER3-II cannot be mixed in a 2-way configuration. Ultra3 SCSI backplane feature number 6567 is required when ordering processor feature numbers 5300 or 5309. It is optional with processor feature number 5322. Processor cards must be installed starting in slot 1 first, then slot 2. Power Supply Base machine contains two AC power supplies (#6277) in the lower two slots. #6277 is initial order only. Redundant power supply AC (#6275) System Memory A maximum of 8 GB of system memory. A minimum of 512 MB of memory is required. Memory DIMMs must be ordered and installed in pairs on the memory card. They must be installed starting at the bottom of the card (card slot J1 and J2) and then moving up. Refer to Figure 1. Figure 1. Memory Card ___________________________________________________________ » _________________ ________________ » » »_________________» J15 J16»________________» » » _________________ ________________ » » »_________________» J13 J14»________________» » » _________________ ________________ » » »_________________» J11 J12»________________» » » _________________ ________________ » » »_________________» J9 J10»________________» » » _________________ ________________ » » »_________________» J7 J8 »________________» » » _________________ ________________ » » »_________________» J5 J6 »________________» » » _________________ ________________ » » »_________________» J3 J4 »________________» » » _________________ ________________ » » »_________________» J1 J2 »________________» » »______________ ______________» »______________________________»   PCI Card Slots There are five PCI slots: Slots 1 and 2 are 64-bit, 3.3V, and run at 50 MHz. Slot 3 is 64-bit, 5V, and runs at 33 MHz. Slots 4 and 5 are 32-bit, 5V, and runs at 33 MHz. Refer to Figure 2. Figure 2. Processor, Memory, and Adapter Slot Locations Top View ____________________________________________ Front -- | | | __________________ | PCI slot 1 -- | |__________________| | | __________________ | PCI slot 2 -- | |__________________| | | __________________ | PCI slot 3 -- | |__________________| | | __________________ | PCI slot 4 -- | |__________________| | | __________________ | PCI slot 5 -- | |__________________| | | _______________________ | Memory card slot 0 -- | |_______________________| | | _______________________ | CPU card slot 1 -- | |_______________________| | | _______________________ | CPU card slot 2 -- | |_______________________| | | | | | |____________________________________________|   Figure 3. Memory Features Feature Feature Number Minimum Maximum ========================= ======= ======= ======= 512 MB (2 x 256 MB DIMMs) 4120 0 8 1024 MB (2 x 512 MB DIMMs) 4121 0 8   Graphics Adapters Graphics adapter, keyboard, and mouse are not required in the minimum configuration. The maximum number of graphics adapters supported in the system is four. Refer to Figure 4 for additional graphics adapter limitations. Audio Audio is not supported on the system Figure 4. Graphics Adapters Priority Adapter Number Max Slot Priority Size ======== ======= ======= === ============= ===== 4 GXT135P 2848 4 1,2,3,4,5 Short 4 GXT135P 2849 4 1,2,3,4,5 Short I/O Adapters The PCI Advanced SerialRAID Plus adapter (#6230) can be selected with or without the Fast-Write Cache Option card (#6235). The SSA Fast-Write Cache Option card (#6235) is a cache upgrade for the SSA Advanced SerialRAID Plus adapter (#6230) and can only be selected along with that adapter (maximum of one per #6230). The 2 Gigabit Fibre Channel Adapter (#6228) is restricted to only one adapter in slots 1 or 2 and/or one adapter in slots 3, 4, or 5. Feature numbers 2498 and 4258 are required for internal RAID. Feature 4258 requires feature 2498 or 6203, or follow-on adapter to be installed. Refer to Figure 5 for additional I/O adapter limitations. Figure 5. I/O Adapter Features Priority I/O Adapter Number Max Slot Priority Size -------- ----------- ------ --- ------------- ---- 1 Cryptographic Coprocessor 4963 2 1,2 Short 1a 2-port Gigabit Ethernet 5707 2 1,2 Short 1b 2-port 10/100/1000 Ethernet 5706 2 1,2 Short 1d S/390 Escon Channel PCI 2751 2 3,4,5 Long 1e Ultra SCSI 6206 2 5,4,3 Short 1h Gigabit Fiber Channel 6228 2 1,2,3,4,5 Short 1i 2 Gigabit Fibre Channel 6239 2 1,2,3,4,5 Short 2 Gigabit Ethernet 2969 5 1,2,3,4,5 Short 3 Gigabit Ethernet UTP 2975 5 1,2,3,4,5 Short 3a Gigabit Ethernet-SX PCI-X 5700 5 1,2,3,4,5 Short 3b 10/100/1000 Base-TX Ethernet5701 5 1,2,3,4,5 Short 5 2-Port Multiprotocol 2962 2 5,4,3,2,1 Short 5a Ultra320 SCSI 5712 2 1,2 Short 5b Ultra320 SCSI RAID 5703 2 1,2 Long 6 Ultra3 SCSI RAID 2498 5 1,2,3,4,5 Long 7 Ultra3 SCSI 6203 5 1,2,3,4,5 Long 8 SSA RAID 5 6230 2 1,2,3,4,5 Long N/A DIMM for #6230 6231 2 N/A N/A N/A Cache for #6230 6235 2 N/A N/A 9 Cryptographic Coprocessor 4960 4 5,4,3,2,1 Short 9a ARTIC960 Hx 4-port 2947 4 1,2,3,4,5 Long 9b ARTIC960 RxD 6310 3 1,2,3,4,5 Long 9c HIPPI Short-wave 2732 2 1,2,3,4,5 Long 9d HIPPI Long-wave 2733 2 1,2,3,4,5 Long 10 4-Port 10/100 Ethernet 4961 5 5,4,3,2,1 Long 11 8-Port Async 2943 5 5,4,3,2,1 Short 12 128-Port Async 2944 5 5,4,3,2,1 Short 13 4/16 Token Ring 4959 4 5,4,3,2,1 Short 14 10/100 Ethernet 4962 5 5,4,3,2,1 Short 15 Ultra SCSI Differential 6204 5 5,4,3,2,1 Short 16 155 UTP ATM 4953 5 5,4,3,2,1 Short 17 155 MMF ATM 4957 5 5,4,3,2,1 Short 18 622 MMF ATM 2946 5 1,2,3,4,5 Short Storage Devices/Bays Default DASD is in Bolt-In DASD Bay 0. Hot-swap Hard Disk Bay 1 can also be used for mandatory disk. Feature numbers #6156 and #2623 can be installed only if feature number #6567 is installed. When feature numbers #6156 or #2623 are installed in the system, the system performance may be degraded. Place smallest capacity DASD first, then place DASD with next highest capacity. Install DASD in ascending order capacity until all DASDs are in place. Figure 7. Storage Device Features Feature Device Maximum Bay Number ===================================== ======= ============ ======= 650 MB 48x CD-ROM 2 Media 1/2 2633 4.7 GB DVD-RAM 2 Media 1/2 2623 4-mm 20/40 GB Tape 1 Media 1 6158 8-mm 20/40 GB Tape 1 Media 1 6156 18.2 GB 10 K rpm Ultra3 SCSI Disk, 6 1,3,5,2,6,4 3263 Hot-swap 18.2 GB 10 K rpm Ultra3 SCSI Disk, 2 Media bay 1 3102 Bolt-in DASD bay 0 36.4 GB 10 K rpm Ultra3 SCSI Disk, 6 1,3,5,2,6,4 3264 Hot-swap 36.4 GB 10 K rpm Ultra3 SCSI Disk, 2 Media bay 1 3119 Bolt-in DASD bay 0 73.4 GB 10 K rpm Ultra3 SCSI Disk, 6 1,3,5,2,6,4 3265 Hot swap 73.4 GB 10 K rpm Ultra3 SCSI Disk, 2 Media bay 1 3118 DASD bay 0   Figure 8. Storage Device Locations Front View _________________________________________________________________ | ____ | | |____| RJ48 Serial Port 1 | | ____________________ | | | | | | | Operator panel/ | | | | Bolt-in DASD bay 0| | | |____________________| | | ____________________ | | | | | | | Media bay 1 | | | __ __ __ __ __ __ |____________________| | | | | | | | | | | | | | | ____________________ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Media bay 2 | | | | | | | | | | | | | | | |____________________| | | | | | | | | | | | | | | ____________________ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Diskette | | | | | | | | | | | | | | | |____________________| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |__| |__| |__| |__| |__| |__| | | 6 5 4 3 2 1 | | | | Hot-Swap Hard Disks | | | |_________________________________________________________________| IDE/SCSI Cable Configurations IDE CD-ROM (#2633 or follow-on) requires #4246 Disk drive in DASD bay 0 (#3102, #3119 or follow-on) requires #4259, #4247 or #4248 and #4249 (Since #3102 or #3119 is in the base, either #4259, #4247 or #4248 and #4249 must be in initial order) Device(s) in media bay 1 or 2 (#2623, #6156, #6158, #3102, #3119 or follow-ons) requires #4259 or #4248 and #4249 SCSI hot-swap disk drive (#3263, #3264, or follow-on) requires #4247 or #4248 and #4249 #4259 is used to connect the integrated controller to the media bays and bolt-in DASD. Required when cable #4258 is used in the configuration and a device is in media bay 1 or 2, or bolt-in bay 0. If feature number 4258 is installed, feature number 6203 (or follow-ons) or feature numbers 3102 or 3119 (or follow-ons) must be installed to assure boot capability. Hardware Requirements Model 6C1 Minimum System Configuration The Model 6C1 rack-mounted server can be configured to incorporate up to two processors, 8GB of system memory, 5 PCI adapters, and multiple media devices, as desired. This flexibility is made available through the many optional features for the Model 6C1. Each Model 6C1 must include a minimum of the following items: One system Central Electronics Complex (CEC) enclosure with the following items: One Power Cord Supply, specify (#98XX or #99XX) One Language Group, specify (#9XXX) One Processor Card, choose from: POWER3-II Processor: 1-way 333 MHz, 4MB L2 Cache (#5322) POWER3-II Processor: 1-way 375 MHz, 4MB L2 Cache (#5300) POWER3-II Processor: 1-way 450 MHz, 8MB L2 Cache (#5309) 512 MB Memory Minimum: Choose 512 MB Memory Minimum: 512 MB Memory (2x256 MB DIMMs) (#4120) 1024 MB Memory (2x512 MB DIMMs) (#4121) One 18.2 GB Ultra3 SCSI Disk Drive (#3102 or #3263) One Diskette Drive One CD-ROM (#2633) or DVD-RAM (#2623): Cables #4246 and #4259 for CD-ROM Cables #4259 for DVD-RAM Two AC Power Supplies (#6277) pSeries 610 Model 6C1 HA Solution Configuration The Model 6C1 HA solution package must include a minimum of the following hardware and software that must be ordered together as specified: Two - Model 6C1 Servers each incorporating: One - CEC Choose one or two 1-way processor cards: One/two -1-way 375 MHz processor card with 4MB of L2 cache (#5300) One/two -1-way 450 MHZ processor card with 8MB of L2 cache (#5309) 512 MB Memory Ultra3 SCSI Backplane (#6567) Two - PCI SSA Adapters Two - LAN Adapters (One Integrated Ethernet port may be used) One - Redundant CEC AC Power Supply (#6277) (Two power supplies are in the base system; a third is needed for redundancy) One - Serial to Serial Port Cable for Drawer/Drawer (#3124) Note: Only one serial cable (#3124) is needed for the two Model 6C1 servers. Redundant dedicated heartbeat and messaging paths required via LAN and Async ports on each server. One - Serial Port Converter Cable, 9-Pin to 25-Pin (#3925) One - AIX Version 4.3.3, Version 5.1, or later license One - HACMP Version 4.4, or later license Note: Additional optional Model 6C1 features can be added. One - 7014-T00 or 7014-T42 System Rack, including: Two - Rack Content Specify: 7028-6C1 (#0197) One - Rack content Specify: 7133-D40 (#0156) One - Power Distribution Unit, Side Mount (#6171, #6173, or #6174) Note: Additional optional 7014-T00 or 7014-T42 features can be added. One - 7133-D40 Serial Disk System, including: Four - SSA Disk Drives Six - Advanced SSA Cables One - Rochester Manufacturing Integration (#0987) or Dublin Manufacturing Integration (#0970) Note: Additional optional 7133-D40 features can be added. IBM eServer Package for the pSeries 610 Model 6C1 This package is a complete base (minimum) infrastructure solution package that features the following IBM components: One specially configured pSeries 610 Model 6C1 One high-performance 7133-D40 SSA Serial Disk System with a minimum of 72.8 GB of disk storage or one 2104-DU3 Expandable Storage Plus SCSI disk storage system with a minimum of 72.8 GB of disk storage One 19-inch T00 or T42 Rack to mount the servers and storage systems AIX Version 4.3.3 or 5.1, or later System Network Analysis Performance Pilot software (included with AIX) Download System Management software at no charge from: www.ibm.com/servers/pervasivesm IBM eServer HA Infrastructure Package for the pSeries 610 Model 6C1 This package is a complete base (minimum) infrastructure solution package with built-in redundant features for high availability. The following are required components of the package: Two specially configured pSeries 610 Model 6C1s One IBM high-performance 7133-D40 Serial Disk System with a minimum of 72.8 GB of disk storage or two 2104-DU3 Expandable Storage Plus SCSI disk storage systems each with a minimum of 72.8 GB of disk storage One 19-inch T00 or T42 Rack to mount the servers and storage systems AIX Version 4.3.3 or 5.1, or later HACMP 4.4 - high-availability cluster software System Network Analysis Performance Pilot software included with AIX Download Wireless System Management software at no charge from: www.ibm.com/servers/pervasivesm IBM eServer pSeries 610 Model 6C1 Package Standard Configuration: The pSeries 610 Model 6C1 package must include a minimum of the following hardware and software, which is ordered together as specified: One - 7028-6C1, including a minimum of: One - Offering Indicator (#0703) One 1-way 450 MHz processor with 8 MB of L2 cache per processor (#0516) Note: An additional 1-way processor (#5309) may be added. 2 GB memory Ultra3 SCSI Backplane (#6567) One - CD-ROM (#2633) or DVD-RAM Drive (#2623) Cables #4246 and #4247 needed for CD-ROM Cables #4248 and #4249 needed for DVD-RAM Two - 18.2 GB, or larger, disk drives One - Graphics adapter One - PCI SCSI Adapter (Integrated SCSI port can be used in place of the adapter) or a PCI SSA Adapter Two - AC Power supplies (#6277) One - Software Preinstall (#5005) One - AIX Version 4.3.3 or 5.1, or later, license Notes: Additional 6C1s may be ordered. Additional optional 7028-6C1 features may be added as desired. One - 2104-DU3 SCSI disk system, including: One - Solution Indicator (#0703) Four - 18.2 GB, or larger, Disk Drives (#5518 or #5536) One - Rochester Integration Indicator (#0987) or Dublin Integration Indicator (#0970) One - AC Power Supply (#3230) One - Additional Fan Unit (#3299) One - 3 meter Ultra2 LVD Cable (#5303) or   One 7133-D40 Serial disk (SSA) storage system, including: One - Solution Indicator (#0703) Four - 18.2 GB, or larger, Disk Drives (#5518 or #5536) One - Rochester Integration Indicator (#0987) or Dublin Integration Indicator (#0970) One - 50/60 Hz AC Power Supply (#8022) One - Drawer Cover (#8031) Two - 5 meter SSA Cable (#8805) Note: All additional 7133s or 2104s must be in the system order. One - 7014-T00 or 7014-T42 System Rack including: One - Solution Indicator (#0703) One - Rack Content Specify: 7028-6C1 (#0197) One - Rack Content Specify: 7133-D40 (#0156) or 2104-DU3 (#0179) One - Power Distribution Unit Specify - Side Mount (#9171, #9173, or #9174) One - Additional Power Distribution Unit - Side Mount (#6171, #6173, or #6174) One - Front Door (#6088 on the T00, #6089 on the T42) Two - Side Panels (#6098) Note: Maximum number of T00 or T42 Racks allowed is one. IBM eServer pSeries 610 Model 6C1 High-Availability Infrastructure Package Standard Configuration: The pSeries 610 Model 6C1 High-Availability Infrastructure package must include a minimum of the following hardware and software, which is ordered together as specified: Two - 7028-6C1s, each incorporating: One - Offering Indicator (#0704) One - 1-way 450 MHz processor with 8 MB of L2 cache per processor (#0516) Note: An additional 1-way processor (#5309) may be added. 2 GB memory Ultra3 SCSI Backplane (#6567) One - CD-ROM (#2633) or DVD-RAM Drive (#2623) Cables #4246 and #4247 needed for CD-ROM Cables #4248 and #4249 needed for DVD-RAM Two - 18.2 GB, or larger, disk drives One - Graphics adapter Two - PCI SCSI Adapters (Integrated SCSI port can be used in place of one adapter) or PCI SSA Adapters Two - LAN Adapters (One integrated Ethernet port may be used) One - Redundant AC Power Supply (#6277) (Two power supplies are in the base system; a third is needed for redundancy) One - Serial Port Converter Cable, 9-Pin to 25-Pin (#3925) Note: For the latest Firmware level go to the Web site below and choose the description hotlink in the RS/6000 System/Service Processor Microcode Combined Microcode table entry for 7028-6C1: http://w3.austin.ibm.com/projects/firmware/images/colt/CLT01334 Two - AC Power Supplies (#6277) One - Serial to Serial Port Cable for Drawer/Drawer (#3124) One - Software Preinstall (#5005) One - AIX Version 4.3.3 or 5.1, or later, license One - HACMP Version 4.4, or later, license Note: Only one serial cable (#3124) is needed for the two pSeries 610 Model 6C1 servers. Redundant dedicated heartbeat and messaging paths are required via LAN and Async ports on each server. HACMP requires APAR IY17684 to support HAS and also APARs IY19089 and IY9156 to support CRM on AIX Version 5.1. Additional 6C1s may be ordered. Additional optional 7028-6C1 features may be added as desired. One - 7133-D40 serial disk (SSA) system, including: One - Solution Indicator (#0704) Four - 18.2 GB, or larger, Disk Drives (#5518 or #5536) One - Rochester Integration Indicator (#0987) or Dublin Integration Indicator (#0970) One - 50/60 Hz AC Power Supply (#8022) One - Drawer Cover (#8031) Six - 5 meter SSA Cables (#8805) or   Two 2104-DU3 SCSI disk storage systems, each including: One - Solution Indicator (#0704) Four - 18.2 GB, or larger, Disk Drives (#5518 or #5536) One - Rochester Integration Indicator (#0987) or Dublin Integration Indicator (#0970) One - Second Ultra3 (LVD) Port (#2635) Two - AC Power Supply (#3230) Two - 3 meter Ultra2 LVD Cables (#5303) Note: All additional 7133s or 2104s must be added to the first B80. One - 7014-T00 or 7014-T42 System Rack including: One - Solution Indicator (#0704) Two - Rack Content Specify: 7028-6C1 (#0197) One - Rack Content Specify: 7133-D40 (#0156) or   Two - Rack Content Specify: 2104-DU3 (#0179) One - Front Door (#6088 on the T00, #6089 on the T42) Two - Side Panels (#6098) One - Additional Distribution Unit, Side Mount (#6171, #6173, or #6174) Note: Maximum number of T00 or T42 Racks allowed is one. Software Requirements The Model 6C1 requires AIX Version 4.3.3 or 5.1, or later. Shipment Group: The Model 6C1 is shipped with the following: Mounting Rails (Model 6C1 only) RJ45 to 9-pin cable (Model 6C1 only) Language group, which includes system publications (the appropriate specify code must be on the order) Power cords Back to top   Publications None. Back to top   Features -- Specify/Special/Exchange No Charge Specify Codes Special Feature Codes -- Chargeable Feature Exchanges No Charge Specify Codes LANGUAGES (#9300) - Language Group Specify - US English (#9703) - Language Group Specify - French (#9704) - Language Group Specify - German (#9705) - Language Group Specify - Polish (#9707) - Language Group Specify - Portuguese (#9708) - Language Group Specify - Spanish (#9711) - Language Group Specify - Italian (#9712) - Language Group Specify - Canadian French (#9714) - Language Group Specify - Japanese (#9715) - Language Group Specify - Traditional Chinese (Taiwan) (#9716) - Language Group Specify - Korean (#9719) - Language Group Specify - Hungarian (#9720) - Language Group Specify - Slovakian (#9721) - Language Group Specify - Russian (#9722) - Language Group Specify - Simplified Chinese (PRC) (#9724) - Language Group Specify - Czech POWER (#6275) - Power Supply, 250 Watt AC, Hot-swap, Redundant (#6277) - Power Supply, 250 Watt AC, Hot-swap, Base and Redundant LINECORDS (#9800) - Power Cord Specify - United States/Canada (#9802) - Power Cord Specify - Brazil (125V, 15A) (#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A) (#9821) - Power Cord Specify - Denmark (250V, 10A) (#9825) - Power Cord Specify - United Kingdom (250V, 13A) (#9827) - Power Cord Specify - Israel (250V, 6-16A) (#9828) - Power Cord Specify - Switzerland (250V, 10A) (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A) (#9830) - Power Cord Specify - Italy (250V, 10A and 16A) (#9831) - Power Cord Specify - Argentina (250V, 10A) (#9833) - Power Cord Specify - Thailand (250V, 15A) (#9834) - Power Cord Specify - Uruguay (250V, 10A) MISCELLANEOUS (#5005) - Software Preinstall (#0001) - After-market (MES) Order Indicator (#0703) - Solution Indicator (#0704) - HA Solution Indicator (#1736) - Expedited Delivery Service Indicator (#7305) - AAP Software Pre-Install Indicator (#7779) - OEM Publications for IBM Logo Product (#0986) - CCS Customer Service Specify (US) (#5001) - Customer Service Specify RACK RELATED (#9900) - Power Cord (4M) Specify -- United States/Canada (#9901) - Power Cord (4M) Specify -- EMEA (#9902) - Power Cord (4M) Specify -- Denmark (#9903) - Power Cord (4M) Specify -- U.K. and Others (#9904) - Power Cord (4M) Specify -- Israel (#9905) - Power Cord (4M) Specify -- Switzerland (#9906) - Power Cord (4M) Specify -- India and Others (#9907) - Power Cord (4M) Specify -- Italy (#9908) - Power Cord (4M) Specify -- Australia and Others (#9909) - Power Cord (4M) Specify -- Thailand (#9911) - Power Cord (4M) Specify -- All (Standard rack power cord) Special Feature Codes -- Chargeable Special Features - Initial Orders PROCESSORS (#8091) - 1-way 450MHz POWER3-II Processor Card, Express Configurations, Factory Only (#8092) - 1-way 450MHz POWER3-II Processor Card, Express Configurations, Factory Only MEMORY (#8093) - 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only (#8094) - 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only (#8095) - 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only MISCELLANOUS (#8096) - Express Configuration -- pSeries 610 (100C/100E) (#8097) - Express Configuration -- pSeries 610 (200C/200E) (#8098) - Express Configuration -- pSeries 610 (250C/250E) (#8099) - Express Configuration -- pSeries 610 (125C/125E) RAID Special Features - Plant and/or Field Installable ADAPTERS (#2498) - PCI 4-Channel Ultra3 SCSI RAID Adapter (#2732) - IBM Short-wave Serial HIPPI PCI Adapter for RS/6000 (#2733) - IBM Long-wave Serial HIPPI PCI Adapter for RS/6000 (#2751) - S/390 ESCON Channel PCI Adapter (#2848) - POWER GXT135P Graphics Accelerator (#2849) - POWER GXT135P Graphics Accelerator with Digital Support (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus (#2944) - 128-Port Asynchronous Controller, PCI bus (#2946) - Turboways 622 Mbps PCI MMF ATM Adapter (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter (#2962) - 2-Port Multiprotocol PCI Adapter (#2969) - Gigabit Ethernet - SX PCI Adapter (#2975) - 10/100/1000 Base-T Ethernet PCI Adapter (#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter (#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter (#4959) - IBM Token-Ring PCI Adapter (#4960) - IBM e-business Cryptographic Accelerator (#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter (#4962) - 10/100 Mbps Ethernet PCI Adapter II (#4963) - PCI Cryptographic Coprocessor (FIPS-4) (#4964) - PCI Cryptographic Coprocessor (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter (#6203) - PCI Dual Channel Ultra3 SCSI Adapter (#6204) - PCI Universal Differential Ultra SCSI Adapter (#6206) - PCI Single-Ended Ultra SCSI Adapter (#6228) - 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus (#6230) - Advanced SerialRAID Plus Adapter (#6231) - 128 MByte DRAM Option Card (#6235) - 32 MByte Fast-Write Cache Option Card (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter (#6310) - IBM ARTIC960RxD Quad Digital Trunk PCI Adapter CABLES (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable (#2115) - PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable (#2116) - PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M (#2424) - 0.6M 16-bit SCSI-2 System to System Cable (#2425) - 2.5M 16-bit SCSI-2 System to System Cable (#2456) - LC-SC 50 Micron Fibre Converter Cable (#2459) - LC-SC 62.5-Micron Fiber Converter Cable (#2709) - ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable (#2710) - ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable (#2861) - ARTIC960Hx 4-Port EIA-232 Cable (#2863) - ARTIC960Hx 4-Port X.21 Cable (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable (#2871) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable (#2872) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable (#2873) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable (#2874) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable (#2875) - IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, 1.8M 4-Port Cable (#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable (#2934) - Asynchronous Terminal/Printer Cable EIA-232 (#2936) - Asynchronous Cable EIA-232/V.24 (#2951) - Cable, V.24 / EIA-232 (#2952) - Cable, V.35 (#2953) - Cable, V.36 / EIA-499 (#2954) - Cable, X.21 (#3124) - Serial to Serial Port Cable for Drawer/Drawer (#3125) - Serial to Serial Port Cable for Rack/Rack (#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin (#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell) (#4246) - IDE 2-Drop Connector Cable (#4247) - SCSI 2-Drop Cable: Integrated SCSI to SCSI Backplane and Bolt-in Disk (#4248) - SCSI Connector Cable and Repeater Card (#4249) - 3-Drop Cable: Backplane to Media Bays/Bolt-in Disk (#4258) - SCSI Cable, PCI Adapter to Hot-Swap Disks (#4259) - 3-Drop Cable: Integrated SCSI to Media Bays/Bolt-in Disk (#4353) - H-100 Bus 8-position Cable (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch) (#8133) - RJ-45 to DB-25 Converter Cable (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232 DISKS (#3102) - 18.2 GB 10,000 RPM Ultra SCSI Disk Drive (#3118) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive (#3119) - 36.4GB 10,000 RPM Ultra SCSI Disk Drive (#3263) - 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly (#3264) - 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly (#3265) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly (#3276) - 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly (#3280) - 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly (#3281) - 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly (#6566) - Mounting Hardware for Disk in Media Bay DISPLAYS (#3627) - IBM P76/P77 Color Monitor, Business Black, Captured Cable (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable (#3635) - T210 Flat-Panel Monitor (#3636) - L200P Flat Panel Monitor (#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable (#3639) - IBM ThinkVision L170p Flat Panel Monitor (#3640) - IBM ThinkVision L171p Flat Panel Monitor (#3642) - ThinkVision L191p Flat Panel Monitor KEYBOARDS (#8700) - Quiet Touch Keyboard - Business Black, US English, #103P (#8701) - Quiet Touch Keyboard - Business Black, French, #189 (#8702) - Quiet Touch Keyboard - Business Black, Italian, #142 (#8703) - Quiet Touch Keyboard - Business Black, German/Austrian, #129 (#8704) - Quiet Touch Keyboard - Business Black, UK English, #166 (#8705) - Quiet Touch Keyboard - Business Black, Spanish, #172 (#8706) - Quiet Touch Keyboard - Business Black, Japanese, #194 (#8707) - Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275 (#8708) - Quiet Touch Keyboard - Business Black, Canadian French, #058 (#8709) - Quiet Touch Keyboard - Business Black, Belgian/French, #120 (#8710) - Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120 (#8711) - Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153 (#8712) - Quiet Touch Keyboard - Business Black, Danish, #159 (#8713) - Quiet Touch Keyboard - Business Black, Bulgarian, #442 (#8714) - Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g (#8716) - Quiet Touch Keyboard - Business Black, Norwegian, #155 (#8717) - Quiet Touch Keyboard - Business Black, Dutch, #143 (#8718) - Quiet Touch Keyboard - Business Black, Portuguese, #163 (#8719) - Quiet Touch Keyboard - Business Black, Greek, #319 (#8720) - Quiet Touch Keyboard - Business Black, Hebrew, #212 (#8721) - Quiet Touch Keyboard - Business Black, Hungarian, #208 (#8722) - Quiet Touch Keyboard - Business Black, Icelandic, #197 (#8723) - Quiet Touch Keyboard - Business Black, Polish, #214 (#8724) - Quiet Touch Keyboard - Business Black, Romanian, #446 (#8725) - Quiet Touch Keyboard - Business Black, Slovakian, #245 (#8726) - Quiet Touch Keyboard - Business Black, Czech, #243 (#8727) - Quiet Touch Keyboard - Business Black, Turkish, #179 (#8728) - Quiet Touch Keyboard - Business Black, Turkish, #440 (#8729) - Quiet Touch Keyboard - Business Black, LA Spanish, #171 (#8730) - Quiet Touch Keyboard - Business Black, Arabic, #238 (#8732) - Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118 (#8733) - Quiet Touch Keyboard - Business Black, Korean, #413 (#8734) - Quiet Touch Keyboard - Business Black, Chinese/US, #467 (#8735) - Quiet Touch Keyboard - Business Black, French Canadian, #445 (#8736) - Quiet Touch Keyboard - Business Black, Thailand, #191 (#8738) - Quiet Touch Keyboard - Business Black, Russian, #443 (#8739) - Quiet Touch Keyboard - Business Black, Croatian, #105 (#8740) - Quiet Touch Keyboard - Business Black, US English ISO9995, #103P MEMORY (#4120) - 512MB (2x256MB) DIMMs, 200-pin 10NS SDRAM (#4121) - 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM MEDIA DEVICES (#2623) - 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel) (#2633) - IDE CD-ROM Drive (Black bezel) (#2634) - 16X/48X(max) IDE DVD-ROM Drive (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology (#6134) - 60/150 GB 16-bit 8mm Internal Tape Drive (#6156) - 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel) (#6158) - 20/40GB 4mm Internal Tape Drive MISCELLANEOUS (#3752) - Service Package (#6567) - Ultra3 SCSI Backplane for Hot-swap Disks (#8741) - 3-Button Mouse - Business Black PROCESSORS (#0516) - 1-Way 450MHz POWER3-II Processor, Infrastructure Solutions, Factory Only (#5300) - 1-Way 375MHz POWER3-II Processor Card (#5309) - 1-way 450MHz POWER3-II Processor Card (#5322) - 1-Way 333MHz POWER3-II Processor Card SPECIFY CODES (#9004) - Southern Hemisphere Designator for Monitors Feature Descriptions The following is a list of all feature codes in numeric order. Attributes, as defined in the following feature descriptions, state the interaction of requirements among features. Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features. The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities. The order type defines if a feature is orderable only on initial orders, only on MES orders, on both initial and MES orders, or if a feature is supported on a model due to a model conversion. Supported features cannot be ordered on the converted model, only left on or removed from the converted model. (#0001) After-market (MES) Order Indicator This feature may be used in orders for features ordered by MES. This feature prevents configuration checking. It does not have to be repeated for subsequent MES orders for the same machine. Attributes provided: None Attributes required: None For 7028-6C1: (#0001) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 0) OS level required: None Initial Order/MES/Both/Supported: MES (#0516) 1-Way 450MHz POWER3-II Processor, Infrastructure Solutions, Factory Only (No Longer Available as of December 31, 2002) This feature provides a 1-way POWER3-II 450MHz processor for systems being implemented in Infrastructure offerings. Attributes provided: 1-Way Processor Equivalent to #5309 Attributes required: Empty Processor Slot and #0703 or #0704 For 7028-6C1: (#0516) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: This feature is available only at the initial order of an Infrastructure Offering. (#0703) Solution Indicator (No Longer Available as of December 31, 2002) This feature is required when ordering certain Infrastructure Offerings. It is for administrative use only and provides no parts. Attributes provided: None Attributes required: None For 7028-6C1: (#0703) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: This feature is available only at the initial order of an Infrastructure Offering. (#0704) HA Solution Indicator (No Longer Available as of December 31, 2002) This feature is required when ordering certain High Availability Infrastructure Offerings. It is for administrative use only and provides no parts. Attributes provided: None Attributes required: None For 7028-6C1: (#0704) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: This feature is available only at the initial order of an Infrastructure Offering. (#0986) CCS Customer Service Specify (US) This feature code specifies that the system will receive special request services from the Center for Customized Solutions (CCS). FC 0986 is available only on the initial plant order. Attributes provided: None Attributes required: None For 7028-6C1: (#0986) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial (#1736) Expedited Delivery Service Indicator: (No Longer Available as of June 25, 2004) This feature number specifies that a system will be shipped to the customer with expedited 2 day delivery. Attributes provided: None Attributes required: None For 7028-6C1: (#1736) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 differential adapter Attributes required: 1 external SCSI-2 Fast/Wide Port For 7028-6C1: (#2114) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2115) PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable (No Longer Available as of April 26, 2002) Attributes provided: Attachment of external 2-port 16-bit SE devices to the PCI SCSI-2 Fast/Wide adapter Attributes required: 1 external SCSI-2 Fast/Wide Port For 7028-6C1: (#2115) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2116) PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable (No Longer Available as of April 26, 2002) Attributes provided: Attachment of external 2-port 16-bit differential devices to the PCI SCSI-2 differential adapter Attributes required: 1 external SCSI-2 Fast/Wide Port For 7028-6C1: (#2116) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M 0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI connector to a 68-pin P style connector. Cable has male Mini-68 pin VHDCI connector on one end and a female 68 pin P style connector on the other. Length = 0.3 meters. Attributes provided: Attachment of supported external sub-system to integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector. Attributes required: None For 7028-6C1: (#2118) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2424) 0.6M 16-bit SCSI-2 System to System Cable (No Longer Available as of December 10, 2004) This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system. Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at each end Attributes required: 68-pin SCSI Interface For 7028-6C1: (#2424) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2425) 2.5M 16-bit SCSI-2 System to System Cable This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system. Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at each end Attributes required: 68-pin SCSI Interface For 7028-6C1: (#2425) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2456) LC-SC 50 Micron Fibre Converter Cable 50 micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters. Attributes provided: Attachment to external 50 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector. Attributes required: None For 7028-6C1: (#2456) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max) OS level required: None Initial Order/MES/Both/Supported: Both (#2459) LC-SC 62.5-Micron Fiber Converter Cable 62.5-micron fiber cable used to convert from LC type to SC type connectors. Cable has male LC type connector on one end and a female SC type connector on the other. Length = 2 meters. Attributes provided: Attachment to external 62.5-micron fabric or device with one type fiber connector to an adapter with the other type fiber connector. Attributes required: None For 7028-6C1: (#2459) Minimum required: 0 Maximum allowed: No Max (Initial order maximum: No Max) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter (No Longer Available as of December 10, 2004) The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a non- bootable high performance Ultra3 SCSI RAID Adapter providing RAID 0,1,1E, 5, or 5E capability and can address up to sixty 16-bit SCSI physical disk drives on four independent SCSI buses. To increase the data writing performance, a 128 MByte fast-write cache is provided as a resident part of this adapter. The 128 MByte fast-write cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter that utilizes non-volatile RAM. During the unlikely event of an PCI 4-Channel Ultra3 SCSI RAID Adapter failure, a replacement PCI 4-Channel Ultra3 SCSI RAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter insuring data integrity. The 128 MByte fast-write cache can provide an significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3 SCSI buses. There are two internal ports and four external ports. The two internal ports are shared with two of the external ports. Two of the four busses can drive either an internal port or an external port. The other two busses only drive external ports. The internal ports can be used to provide an internal RAID solution on supporting RS/6000 systems. Systems with one or two internal 6-pack disks can attach to a PCI 4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate. The four external ports also provide connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Limitations: The four external ports do not support the connection to the IBM 7131-105 external Fast/Wide SCSI disk enclosure. Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up to 80MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system backplane. In order for full support and to take full advantage of the Ultra3 (up to 160 MBytes/s) speed of this adapter, the proper AIX level also needs to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX versions support the full range of SCSI bus data rates (including Ultra3 SCSI up to 160 MByte/s). Check the AIX level your system has or is able to support. Attributes provided: Attachment of internal and external SCSI devices Attributes required: One PCI bus slot For 7028-6C1: (#2498) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2623) 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel) (No Longer Available as of September 24, 2004) The SCSI-2 DVD-RAM drive is a multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This device also provides read/write compatibility with conventional 2.6GB DVD-RAM discs. System boot and install functions are supported with CD-ROM and DVD-RAM media. Characteristics: Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diameter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD) Interface: SCSI-2 supporting synchronous and asynchronous data transfer Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM High-speed synchronous burst rate of 10MB/second Loading tray accommodates both 8cm discs (in horizontal orientation only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges Operates in either vertical or horizontal position Reads multi-session discs Reads CD-recordable discs Reads CD-RW discs Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio Contains headphone output and line output for audio Limitations: DVD video is not supported. Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM Attributes required: 1 half high media bay and one SCSI address For 7028-6C1: (#2623) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both Note: One of #2623 or #2633 required. (#2633) IDE CD-ROM Drive (Black bezel) (No Longer Available as of December 30, 2005) The 48X (Max) IDE Internal CD-ROM Drive is a tray loading CD-ROM drive providing up to 7200KB/sec maximum media data transfer rate. It is a 5.25 inch half-high form factor, multi-session capable, CD-ROM drive which provides state of the art performance and supports existing 650MB CD-ROM discs. Characteristics: Media Data Transfer Rate: 7200 KB/sec (Max) Interface: IDE/ATAPI Avg. Random Access Time: 75ms (typical) Buffer Memory: 128KB Media capacity: 650MB Multisession capable (Reads CDR & CDRW media) 5.25-inch half-high form factor Operates in either vertical or horizontal positions Interface supports standard and extended XA formats Loading tray supports 12cm and 8cm disks Attributes provided: 650MB 48X (Max) (Up to 7200KB/sec) IDE CE-ROM Attributes required: 1 half-high media bay For 7028-6C1: (#2633) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both Note: One of #2623 or #2633 required. (#2634) 16X/48X(max) IDE DVD-ROM Drive (No Longer Available as of December 30, 2005) The 16X/48X(max) IDE DVD-ROM Drive is an internal tray loading DVD-ROM drive providing up to 7200KB/sec (CD-ROM) and 22.16MB/sec (DVD-ROM) data transfer rates. It is a 5.25 inch half-high form factor multi-session capable, DVD-ROM drive which provides state of the art performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4 GB DVD-ROM (double-sided) discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot and install functions are supported with CD-ROM and DVD-RAM media. Characteristics: Media Data Transfer Rate: CD-ROM=7200 KB/sec (max): DVD-ROM=22.16MB/sec (max) Interface: IDE/ATAPI Avg. Random Access Time: CD-ROM=90ms(typical); DVD-ROM=135ms(typical) Buffer Memory: 256KB Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4 GB(double-sided) Multisession capable (Reads CD/R & CD-R/W media) 5.25-inch half-high form factor Operates in either vertical or horizontal positions Interface supports standard and extended XA formats Loading tray supports 12cm and 8cm disks Limitations: DVD video is not supported. This DVD-ROM drive is limited to reading only CD-type formatted media when running with AIX 5.1 software. Attributes provided: 16X/48X(max) IDE DVD-ROM Drive Attributes required: 1 half-high media bay For 7028-6C1: (#2634) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 5.1, 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: One of #2633, #2634, #2623, or #2627 required. (#2709) ARTIC960Hx/RxD 4-Port T1 RJ-45 Cable (No Longer Available as of June 25, 2004) 4-Port T1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or ARTIC960RxD Quad Digital Trunk adapter. Attributes provided: 4-Port T1 RJ48 cable Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk Adapter For 7028-6C1: (#2709) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310. (#2710) ARTIC960Hx/RxD 4-Port E1 RJ-45 Cable (No Longer Available as of June 25, 2004) 4-Port E1 RJ-48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or the ARTIC960RxD Quad Digital Trunk Adapter. Attributes provided: 4-Port E1 RJ-48 cable Attributes required: 4-port T1/E1 Adapter or Quad Digital Trunk Adapter For 7028-6C1: (#2710) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310. (#2732) IBM Short-wave Serial HIPPI PCI Adapter for RS/6000 (No Longer Available as of December 10, 2004) The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit PCI adapter supporting TCP/IP over a serial HIPPI link. Data is sent and received over optical fiber at 1.2 Gbps using the HIPPI standard 20/24 bit encoding scheme with short wave optical transducers. The effective maximum data rate of the HIPPI interface is 800 Mbps. Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements. http://www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: Attachment to HIPPI Network Attributes required: One 32-bit PCI Slot and LPP 5765-E07 For 7028-6C1: (#2732) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 0) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: MES Only CSU: Yes Return parts MES: No (#2733) IBM Long-wave Serial HIPPI PCI Adapter for RS/6000 (No Longer Available as of August 8, 2003) The IBM Serial HIPPI PCI Adapter is a single slot, full size, 32-bit PCI adapter supporting TCP/IP over a Serial HIPPI link. Data is sent and received over optical fiber at 1.2 Gbps using the HIPPI standard 20/24 bit encoding scheme with long wave optical transducers. The effective maximum data rate of the HIPPI interface is 800 Mbps. Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements. http://www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: Attachment to HIPPI Network Attributes required: One 32-bit PCI Slot and LPP 5765-E07 For 7028-6C1: (#2733) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 0) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: MES Only CSU: Yes Return parts MES: No (#2751) S/390 ESCON Channel PCI Adapter (No Longer Available as of December 10, 2004) Provides RS/6000 Systems the ability to attach to IBM Enterprise Systems Connection (ESCON) channels of the System/390 server. The S/390 ESCON Channel PCI Adapter attaches directly to an ESCON channel providing fiber optic links using LED technology, and also attaches to ESCON Directors (fiber optic switches) permitting connections to multiple Channels. Host operating systems supported include VM/ESA, MVS/ESA, and OS/390. Supported on AIX Version 4.3.0 with separately orderable device driver in License Program Number 5765-D49. Control Unit Multi-path definitions are not supported in IOCP or HCD. 3174 Emulation Mode is not supported. For SNA users, MPC Emulation is now supported. S/390 TCP/IP support is available in: IBM TCP/IP Version 3.1 or later for VM (5735-FAL) IBM TCP/IP Version 3.1 or later for MVS (5735-HAL) MPC support is available in IBM TCP/IP Open Edition Version 3.4 or later, which is shipped as part of OS/390 2.5 (5647-A01) when used in conjunction with IBM VTAM Version 4.4 or later (5695-117). Requires ESCON external cabling APAR OW33336 is recommended to be installed on OS/390 BCP. Characteristics: Single slot, full length PCI adapter Supports VM, MVS, and OS/390 Supports 3088, CLAW (TCP/IP), and MPC (SNA and TCP/IP) Emulations. Supports CLIO/S. Provides the same API for user-written application programs for CLAW and 3088 Emulations as ESCON Channel Connectivity for AIX V1.1 LPP (5765-603) Supports attachment to either 10MB or 17MB ESCON channels. Supports ESCON Multiple Image Facility (EMIF) Maximum distance supported using a combination of LED and XDF ESCON links is 43 Km. Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements. http://www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: 1 ESCON channel attachment interface Attributes required: One PCI slot For 7028-6C1: (#2751) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 0) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: MES Only CSU: Yes Return parts MES: No (#2848) POWER GXT135P Graphics Accelerator (No Longer Available as of December 12, 2003) The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. Hardware Description 128-bit graphics processor 8-bit CLUT or 24-bit true color 16 MB SDRAM 32-bit PCI interface Universal PCI (5.0v or 3.3v) 1 hardware color map Features Supported: Up to approximately 16.7 million colors Rectangular clipping 2 analog monitor outputs Up to 1600 x 1200 resolution 60 to 85 Hz refresh rates (ISO 9241, Part 3) APIs Supported: X-Windows and Motif UMS 2.3.0 (no hardware scaling) Software Requirements: AIX Versions 4.3.3 or 5.1 Attributes provided: 2D Graphics Attributes required: 1 PCI slot For 7028-6C1: (#2848) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2849) POWER GXT135P Graphics Accelerator with Digital Support The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors. Hardware Description 128-bit graphics processor 8-bit CLUT or 24-bit true color 16 MB SDRAM 32-bit PCI interface Universal PCI (5.0v or 3.3v) 1 hardware color map Features Supported Up to approximately 16.7 million colors Rectangular clipping 2 analog monitor outputs at up to 1280 x 1024 resolution 1 analog monitor output at up to 2048 x 1536 resolution 1 digital monitor output at up to 1600 x 1200 resolution 60 to 85 Hz refresh rates (ISO 9241, Part 3) APIs Supported X-Windows and Motif UMS 2.3.0 (no hardware scaling) Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only) Attributes provided: 2D Graphics Attributes required: 1 PCI slot For 7028-6C1: (#2849) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 5.1 or AIX 5.2, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2861) ARTIC960Hx 4-Port EIA-232 Cable Attributes provided: 4-port EIA-232 cable for (#2947) Attributes required: One #2947 adapter For 7028-6C1: (#2861) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 2947. (#2863) ARTIC960Hx 4-Port X.21 Cable Attributes provided: 4-port X.21 cable for (#2947) Attributes required: One #2947 adapter For 7028-6C1: (#2863) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 2947. (#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable Attributes provided: 4-port X.35 (DTE) cable for (#2947) Attributes required: One #2947 adapter For 7028-6C1: (#2864) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 2947. (#2871) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable (No Longer Available as of June 25, 2004) Attributes provided: Connection of 1 to 4 T1 Trunk lines. Attributes required: One (#6310) adapter For 7028-6C1: (#2871) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310. (#2872) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable (No Longer Available as of June 25, 2004) Attributes provided: Connection of 1 to 4 T1 Trunk lines. Attributes required: One (#6310) adapter and (#2871) cable For 7028-6C1: (#2872) Minimum required: 0 Maximum allowed: 16 (Initial order maximum: 16) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310 and feature code number 2871. Maximum of 4 per adapter. (#2873) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable (No Longer Available as of June 25, 2004) Attributes provided: Connection of 1 to 4 E1 Trunk lines. Attributes required: One (#6310) adapter For 7028-6C1: (#2873) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310. (#2874) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable (No Longer Available as of June 25, 2004) Attributes provided: Connection of 1 to 4 E1 Trunk lines. Attributes required: One (#6310) adapter and ##2873) cable For 7028-6C1: (#2874) Minimum required: 0 Maximum allowed: 16 (Initial order maximum: 16) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310 and feature code number 2873. Maximum of 4 per adapter. (#2875) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, 1.8M 4-Port Cable (No Longer Available as of December 27, 2002) Attributes provided: Connection of 1 to 4 E1 Trunk lines. Attributes required: One (#6310) adapter For 7028-6C1: (#2875) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310. (#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable This cable provides the capability to interconnect adapters that provide H.100 bus connectors. This 4-position cable should be used when four or less adapters with H.100 connectors will be interconnected. When more than 4 and less than or equal to 8 adapters will be connected, the H.100 Bus 8-Drop Cable (#4353) should be used. Attributes provided: H.100 bus connection between adapters Attributes required: Two to Four H.100 adapters For 7028-6C1: (#2877) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310. (#2934) Asynchronous Terminal/Printer Cable EIA-232 The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal interposer) and replaces this method of printer/terminal attachment. This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is used in conjunction with: FC 2931 (8-port Async Adapter EIA232, ISA bus) FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136) Attributes provided: EIA232 device attachment capability Attributes required: Any RS/6000 Asynchronous port For 7028-6C1: (#2934) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2936) Asynchronous Cable EIA-232/V.24 Used to attach a modem to the standard I/O ports with the 10-pin to 25-pin converter cable (shipped with the system), 8-port Cable Assembly, 16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The cable is 3 meters (9.8 feet) in length. Attributes provided: Modem attachment to async or serial port Attributes required: Async or serial port For 7028-6C1: (#2936) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All eight ports are software programmable to support either EIA-232E or RS-422A protocols, at up to 230K baud. Attributes provided: 8 Async ports Attributes required: One PCI slot For 7028-6C1: (#2943) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2944) 128-Port Asynchronous Controller, PCI bus (No Longer Available as of March 31, 2006) The 128-Port Async Adapter subsystem provides attachment for a high concentration of asynchronous lines (up to 128) from a single PCI bus slot. This gives the system the ability to serve a large number of user of EIA-232 or RS-422 devices such as terminals, printers, and modems. Two 2.4 Mbps synchronous channels link the adapter to a maximum of eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to each synchronous channel. The new RANs being announced provide 16 EIA-232 (#8137) or 16 RS-422 (#8138) ports yielding a total of 128-ports in a maximum configuration. Existing RANs feature numbers 8130, 8134, or 8136 can also be used with this adapter. If these RANs are connected the synchronous channel the data rate drops down to 1.2 Mbps. For the best results keep the previous and new RANs on separate synchronous channels. Attributes provided: Up to 128 Async Ports Attributes required: One PCI slot, One to eight (#8137) or (#8138) For 7028-6C1: (#2944) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2946) Turboways 622 Mbps PCI MMF ATM Adapter (No Longer Available as of December 17, 2004) The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal PCI Adapter. This adapter provides direct access to the ATM network at a dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI MMF ATM Adapter is a short form-factor adapter that interfaces to the system via the PCI bus and connects to the 622 Mbps ATM network via dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for packet memory. This ATM adapter also provides a hardware assist for TCP checksum which can provide a performance improvement by minimizing the host CPU cycles . Attributes provided: One full-duplex connection to 622 ATM network Attributes required: One available PCI card slot For 7028-6C1: (#2946) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one- slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of: EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of up 2.0M bps. Software support is provided by ARTIC960 Support for AIX, Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that provide AIXLink X.25 LPP Version 1.1.5 support. Note: This adapter may have AIX 5.1 support limitations. Go to to the following URL to view the latest AIX 5.1 support limitation statements. http://www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: One to four WAN connections at up to 2.0Mbps Attributes required: One full length 32-bit PCI slot, AIX Version 4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5, 4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support). For 7028-6C1: (#2947) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#2951) Cable, V.24 / EIA-232 (No Longer Available as of December 30, 2005) V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7028-6C1: (#2951) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2952) Cable, V.35 (No Longer Available as of December 30, 2005) V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7028-6C1: (#2952) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2953) Cable, V.36 / EIA-499 (No Longer Available as of December 30, 2005) V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7028-6C1: (#2953) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2954) Cable, X.21 (No Longer Available as of December 30, 2005) X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962. For 7028-6C1: (#2954) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2962) 2-Port Multiprotocol PCI Adapter (No Longer Available as of December 30, 2005) This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems. This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926). 2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with: X.21 DCE - Using 2-Port Cable, X.21 (#2954) CCITT X.21 Signalling CCITT V.11 Electrical CCITT X.27 Electrical EIA-422-A Electrical ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951) CCITT V.24 Signalling CCITT V.28 Electrical CCITT X.21bis Electrical and Signalling EIA-232-C Electrical and Signalling ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable V.35 DCE - Using 2-Port Cable, V.35 (#2952) CCITT V.35 Some signals for signalling CCITT V.28 Some signals for electrical and signalling ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953) CCITT V.10 Electrical CCITT V.11 Electrical Attributes provided: Two high speed WAN connections Attributes required: One PCI slot For 7028-6C1: (#2962) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2969) Gigabit Ethernet - SX PCI Adapter (No Longer Available as of December 12, 2003) Provides a 1 Gbps (1000BaseT) full-duplex Ethernet LAN connection. Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet switch. Attributes required: Available 64 bit PCI slot, AIX 4.3.2 or later is required for Hardware Checksum and Jumbo Frame support. For 7028-6C1: (#2969) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#2975) 10/100/1000 Base-T Ethernet PCI Adapter (No Longer Available as of December 12, 2003) 10/100/1000 Base-T Ethernet PCI Adapter is a Full Duplex Gigabit Ethernet adapter designed with highly integrated components to optimize cost and performance. The adapter interfaces to the system via the PCI bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. The 10/100/1000 Base-T Ethernet PCI Adapter supports jumbo frames for full duplex Fast & Gigabit Ethernet. AIX's Network Install Manager (NIM) boot capability is supported with this adapter provided your system firmware is at the proper support level. Systems manufactured prior to July, 2001 may require a firmware update. Check the following web URL to review and download latest system firmware if needed: http://www.austin.ibm.com/support/micro/ Note: For optimum performance, adapter should be placed in a 64 bit PCI card slot. Limitation: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode. Attributes provided: One full-duplex 1000Base-T UTP connection to a Gigabit Ethernet LAN. Attributes required: One available PCI card slot For 7028-6C1: (#2975) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3102) 18.2 GB 10,000 RPM Ultra SCSI Disk Drive (No Longer Available as of August 8, 2003) The 18.2GB 10,000 RPM Ultra SCSI Disk Drive provides 18.2GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra SCSI (16-bit, Single Ended) Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D Average Seek Time: 6.02 milliseconds Average Latency: 2.99 milliseconds Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 44.3 MBps Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI adapter in order for the drive to run at 40 MBps. Attributes provided: 18.2 GB storage capacity Attributes required: One disk drive bay. For 7028-6C1: (#3102) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3118) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive (No Longer Available as of December 10, 2004) The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI-3 fast 80 Average Seek Time: 5.38 ms (based on four READS to one WRITE) Average Latency: 3.00 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 83.88 MBps Note: This disk drives requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane for the drive to run at 160 MBps. Any and all other SCSI device(s) on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) for this disk drive to run at 160 MBps. Attributes provided: 73.4 GB of disk storage. Attributes required: One disk drive bay. For 7028-6C1: (#3118) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3119) 36.4GB 10,000 RPM Ultra SCSI Disk Drive (No Longer Available as of December 10, 2004) The 36.4GB 10,000 RPM Ultra SCSI Disk Drive provides 36.4GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra SCSI (16-bit, Single Ended) Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 44.3 MBps Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI adapter in order for the drive to run at 40 MBps. Attributes provided: 36.4GB of disk storage Attributes required: One disk drive bay. For 7028-6C1: (#3119) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3124) Serial to Serial Port Cable for Drawer/Drawer This cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted within the same rack. Attributes provided: None Attributes required: None For 7028-6C1: (#3124) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3125) Serial to Serial Port Cable for Rack/Rack This cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted in separate racks. Attributes provided: None Attributes required: None For 7028-6C1: (#3125) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3263) 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly (No Longer Available as of August 8, 2003) The 18.2GB 10,000 RPM Ultra3 SCSI Disk Drive provides 18.2GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 Mbps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI-3 fast 80 Average Seek Time: 5.1 milliseconds (based on four(4) READS to one (1) WRITE) Average Latency: 2.99 milliseconds Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 44.3 MBps Note: This disk drives requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI device(s) on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160MBps. Attributes provided: 18,2 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 7028-6C1: (#3263) Minimum required: 0 Maximum allowed: 6 (Initial order maximu OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3264) 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly (No Longer Available as of December 10, 2004) The 36.4GB 10,000 RPM Ultra3 SCSI Disk Drive provides 36.4GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI-3 fast 80 Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 millliseconds Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 44.3 MBps Note: This disk drives requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI device(s) on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160MBps. Attributes provided: 36.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 7028-6C1: (#3264) Minimum required: 0 Maximum allowed: 6 (Initial order maxim OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3265) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI-3 fast 80 Average Seek Time: 5.38 ms (based on four READS to one WRITE) Average Latency: 3.00 ms Rotational Speed: 10,000 RPM Maximum Data Transfer Rate: 83.88 MBps Note: This disk drive requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane for the drive to run at 160 MBps. Any and all other SCSI device(s) on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) for this disk drive to run at 160 MBps. Attributes provided: 73.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 7028-6C1: (#3265) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 4.3.3 or later, or AIX 5.1 or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3276) 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly (No Longer Available as of December 10, 2004) The 146.8 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI-3 fast 160 Average Seek Time: 4.94 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2.99 ms Rotational Speed 10,000 RPM Maximum Data Transfer Rate: 67 MBps Note: This disk drives requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160 MBps. Also, any and all other SCSI device(s) on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160 MBps. Attributes provided: 146.8 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 7028-6C1: (#3276) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 5.1 or AIX 5.2 or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3280) - 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly (No Longer Available as of December 10, 2004) The 36.4GB 15,000 RPM Ultra3 SCSI Disk Drive provides 36.4GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI-3 fast 80 Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2 millliseconds Rotational Speed: 15,000 RPM Maximum Data Transfer Rate: 83 MBps Note: This disk drives requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI device(s) on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160MBps. Attributes provided: 36.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 7028-6C1: (#3280) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 4.3.3, AIX 5.1, or later, AIX 5.2 or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3281) - 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive Assembly (No Longer Available as of December 10, 2004) The 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of 160 MBps. Characteristics: Form Factor: 3.5-inch, 1-inch (25 mm) high Cable included: No External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential) Attachment Industry Spec: SCSI-3 fast 80 Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE) Average Latency: 2 ms Rotational Speed 15,000 RPM Maximum Data Transfer Rate: 83 MBps Note: This disk drives requires attachment to a supported Ultra3 SCSI adapter in a system that supports an Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI device(s) on the same SCSI but must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive to run at 160MBps. Attributes provided: 73.4 GB of disk storage mounted in a carrier. Attributes required: One disk drive bay. For 7028-6C1: (#3281) Minimum required: 0 Maximum allowed: 6 (Initial order maximum: 6) OS level required: AIX 4.3.3, AIX 5.1, or later, AIX 5.2 or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable (No Longer Available as of July 25, 2003) The P76/P77 monitor has the following general characteristics: Business Black color 17-inch Flat Trinitron** CRT with a viewable image size of 406 mm (16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images. Designed to provide reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced, with a maximum addressability of 1600 x 1200 pels at 70 Hz. Note: The P76 and P77 monitors are functionally equivalent. Attributes provided: Color Monitor Attributes required: Graphics Adapter For 7028-6C1: (#3627) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3628) IBM P260/P275 Color Monitor, Business Black, and Cable (No Longer Available as of February 27, 2004) The P260/P275 monitor has the following general characteristics: Business Black color 21-inch Flat Trinitron** CRT with a viewable image size of 503 mm (19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images. Designed to provide reduced flicker operation at an optimum addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced. Note: The P260 and P275 monitors are functionally equivalent. Attributes provided: Color Monitor Attributes required: Graphics Adapter For 7028-6C1: (#3628) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3635) - T210 Flat-Panel Monitor (No Longer Available as of February 18, 2003) The T210 flat-panel monitor has the following general characteristics: Business Black color 21-inch TFT LCD digital screen with a viewable image size of 528 mm (20.8 inches) measured diagonally, incorporating a 0.207 mm pixel pitch/type for bright, high-definition images. Designed to provide flicker free operation at a maximum resolution of 2048 x 1536 pels at 60Hz. Tilt/swivel stand Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7028-6C1: (#3635) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3636) L200P Flat Panel Monitor The L200p flat-panel monitor has the following general characteristics: Business Black color 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm (20.1 inches) measured diagonally, incorporating a 0.255 mm pixel pitch/type for bright, high-definition images. Designed to provide flicker free operation at a maximum resolution of 1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in digital mode. Tilt/swivel stand Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter Note: Requires #2848, #2842, or #2843 be installed in the system. For 7028-6C1: (#3636) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable The T541H and the L150p monitors have the following general characteristics: Business Black color 15-inch TFT LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297 mm pixel pitch/type for bright, high-definition images. Designed to provide flicker free operation at a maximum resolution of 1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in digital mode. Tilt/swivel stand Supports 2D Graphics Adapters only Attributes provided: Color Flat-panel Monitor Attributes required: 2D Graphics Adapter For 7028-6C1: (#3637) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable (No Longer Available as of June 24, 2005) The IBM C220p monitor has the following general characteristics: Business Black color 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508 mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel pitch for bright, high-definition images. Designed to provide reduced flicker operation at an optimum and maximum supported addressability of 1600 x 1200 pels at up to 85 Hz (Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa). Tilt/swivel stand Dual input allows attachment to two systems concurrently. Depth: 483.6 mm (19.0 in.) Height: 516.4 mm (20.3 in.) Width: 512.8 mm (20.2 in.) Weight: 30.5 kg (67.2 lbs.) Attributes provided: Color Monitor Attributes required: Graphics Adapter For 7028-6C1: (#3638) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3639) IBM ThinkVision L170p Flat Panel Monitor (No Longer Available as of September 30, 2005) The IBM ThinkVision L170p LCD flat-panel monitor has the following general characteristics: Business color 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 400.0 mm (15.7 in.) Weight: 5.7 kg (12.6 lbs.) Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees Contrast ratio: 500:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7028-6C1: (#3639) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3640) - IBM ThinkVision L171p Flat Panel Monitor The IBM ThinkVision L171p LCD flat-panel monitor has the following general characteristics: Business black color 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.280mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 400.0 mm (15.7 in.) Weight: 5.7 kg (12.6 lbs.) Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees Contrast ratio: 500:1 (minimal) 700:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7028-6C1: (#3640) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3642) - ThinkVision L191P Flat Panel Monitor The ThinkVision L191p LCD flat-panel monitor has the following general characteristics: Business black color 19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294mm pixel pitch/type for bright, high-definition images. Maximum resolution of 1280 x 1024. Tilt/swivel and height adjustable stand Analog or digital connection Dual input allows attachment to two systems concurrently. Internal power Depth: 237.0 mm (9.3 in.) Height: 457.0 mm (18.0 in.) Width: 408.0 mm (16.1 in.) Weight: 7.1 kg (15.7 lbs.) Contrast ratio: 1000:1 (typical) Video inputs: 15-pin D / DVI-D Two removable cables: one analog and one digital Attributes provided: Color Flat-panel Monitor Attributes required: Graphics Adapter For 7028-6C1: (#3642) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#3752) Service Package This kit contains service publications, wrap plugs, and diagnostic CD-ROM. The "Diagnostics Information for Multiple Bus Systems" contains information common to all multiple bus system units and is used primarily for problem isolation by a customer's service specialist trained on the unit being serviced. These publications are intended to be used in the customer's enterprise by the customer's own service specialists, and not by IBM Service personnel. Two wrap plugs are included for use in diagnostic testing of the following connections to the system unit: RS-232 serial I/O port parallel I/O port This kit also contains system diagnostic CD-ROM, along with a test diskette, for use by the customer's service specialist (not by IBM Service personnel). Attributes provided: None Attributes required: None For 7028-6C1: (#3752) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3925) Serial Port Converter Cable, 9-Pin to 25-Pin This cable converts the 9-pin serial port on the system to a 25-pin serial port which allows the user to attach 25-pin serial devices to the system. Attributes provided: None Attributes required: None For 7028-6C1: (#3925) Minimum required: 0 Maximum allowed: 3 (Initial order maximum: 3) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#3926) Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M This 4-meter cable allows external async devices such as printers or terminals to be attached directly to the 9-pin serial port. This is equivalent to using #3925 in combination with #2934. Attributes provided: None Attributes required: None For 7028-6C1: (#3926) Minimum required: 0 Maximum allowed: 3 (Initial order maximum: 3) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4120) 512MB (2x256MB) DIMMs, 200-pin 10NS SDRAM (No Longer Available as of December 10, 2004) Provides 512MB system memory with two 256MB DIMMs. Attributes provided: 512MB System Memory Attributes required: Two empty memory DIMM positions. For 7028-6C1: (#4120) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4121) 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM Provides 1024MB of system memory with 2 512MB DIMMS. Attributes provided: 1024MB of system memory Attributes required: Two empty memory DIMM positions. For 7028-6C1: (#4121) Minimum required: 0 Maximum allowed: 8 (Initial order maximum: 8) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell) This cable is required to connect displays with a 15-pin "D" shell connector to the appropriate accelerator connector when it is farther away than the attached monitor cable can reach. Rack mounted systems are likely candidates for this extender cable. Attributes provided: 6-foot extension cable Attributes required: Supported monitor and adapter with a 15-pin "D" shell connector. For 7028-6C1: (#4242) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4246) IDE 2-Drop Connector Cable (No Longer Available as of December 10, 2004) IDE Cable that connects the IDE controller on the planar to the IDE CD-ROMs in the media bays. Attributes provided: Connection between controller and media bays Attributes required: None For 7028-6C1: (#4246) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4247) SCSI 2-Drop Cable: Integrated SCSI to SCSI Backplane and Bolt-in Disk (No Longer Available as of December 10, 2004) SCSI cable that connects the SCSI controller on the planar to the six hot-swap SCSI disk drives and the bolt-in SCSI disk drive. Attributes provided: Connection between controller and disk drives. Attributes required: For 7028-6C1: (#4247) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4248) SCSI Connector Cable and Repeater Card (No Longer Available as of December 10, 2004) SCSI cable that connects the SCSI controller on the planar to the six hot-swap disks and provides a repeater card, used with #4249, to connect the media bays to the SCSI controller. Attributes provided: Connection between controller and disk drives. Repeater card. Attributes required: None For 7028-6C1: (#4248) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return Parts MES: No (#4249) 3-Drop Cable: Backplane to Media Bays/Bolt-in Disk (No Longer Available as of December 10, 2004) SCSI cable that connects the repeater card (#4248) to the media bays and the bolt-in SCSI disk drive. Attributes provided: Connection between repeater card and media bays and bolt-in DASD bay. Attributes required: #4248 For 7028-6C1: (#4249) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return Parts MES: No (#4258) SCSI Cable, PCI Adapter to Hot-Swap Disks (No Longer Available as of December 10, 2004) SCSI cable that connects a PCI adapter to the hot swap disks. Attributes provided: Connection between adapter and hot swap disk drives. Attributes required: None For 7028-6C1: (#4258) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX V4.3.3 or 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4259) 3-Drop Cable: Integrated SCSI to Media Bays/Bolt-in Disk (No Longer Available as of December 10, 2004) SCSI cable that connects the SCSI controller on the planar to the media bays and the bolt-in SCSI disk drive. Attributes provided: Connection between controller, media bays, and bolt-in SCSI disk drive. Attributes required: None For 7028-6C1: (#4259) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX V4.3.3 or 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4353) H-100 Bus 8-position Cable (No Longer Available as of December 10, 2004) This cable provides the capability to interconnect adapters that provide H.100 bus connectors. This 8-position cable should be used when more than four and less than or equal to eight adapters with H.100 connectors will be interconnected. If four or less adapters are interconnected, the H.100 Bus 4-Drop Cable (#2877) should be used. Attributes provided: H.100 bus connection between adapters Attributes required: Four to eight H.100 adapters For 7028-6C1: (#4353) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: Requires feature code number 6310. (#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter (No Longer Available as of March 31, 2006) The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155 Mbps full-duplex connection using permanent virtual circuits (PVC) or switched virtual circuits (SVC) and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN. This 155 Mbps PCI MMF ATM Adapter is compatible with: IBM 8285 ATM Workgroup Switch IBM 8260 ATM Subsystem IBM 8282 ATM Concentrator IBM 8281 ATM LAN Bridge Attributes provided: One ATM 155Mbps MMF connection Attributes required: One PCI slot For 7028-6C1: (#4957) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later. Initial Order/MES/Both/Supported: Both (#4959) IBM Token-Ring PCI Adapter (No Longer Available as of March 31, 2006) The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short, 32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half- duplex or full-duplex. Automatic Ring-Speed selection prevents "wrong speed" insertion into the ring, even when connected to speed-sensing hubs. This adapter will operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45 connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin D-shell connectors. The Token-Ring PCI Adapter will provide network boot capability. Attributes provided: Attributes required: A single empty 32-bit PCI adapter slot. For 7028-6C1: (#4959) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4960) IBM e-business Cryptographic Accelerator The IBM e-business Cryptographic Accelerator is a short form factor PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure Web transaction, SSL operations is a key requirement. To do this, public-key cryptographic operations using SSL handshake protocol is employed. The IBM e-business Cryptographic Accelerator is a hardware cryptographic solution that off-loads this compute-intensive public-key cryptographic processing from the host. The overall operation control, including command decoding, is implemented in hardware and requires no on-card microprocessor subsystem. As such, the adapter is a less expensive alternative to those who do not need the high security of the on-card secure programming environment such as is offered by the PCI Cryptographic Coprocessor(#4958), but do need the high cryptographic performance that hardware acceleration provides by offloading the host processor. Attributes provided: Data encryption via PCI bus to host Attributes required: 1 PCI slot For 7028-6C1: (#4960) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#4961) IBM Universal 4-Port 10/100 Ethernet Adapter (No Longer Available as of March 31, 2006) IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long, 64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10 Base-T or 100 Base-T interfaces either half or full duplex. Each port is provided with it's own RJ-45 connector for attachment to standard CAT-3/5 Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u compatible and provides full auto-negotiation for detecting speed and duplex capability across each port. Network boot capability and Network Install Manager (NIM) capability are available using this adapter if no specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) should be considered where maximum port density is required per I/O card slot. But, for high end systems, where card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions. Below are some performance factors to consider when choosing the right adapter for your needs. These performance comparisons are based on all four ports of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) being active. With all four ports under full bandwidth conditions, a single IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver up to 3 times the comparable performance of a single IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968). Under most conditions, each port of the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to perform at greater than 50% the throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Eth PCI Adapter (#2968). Note: The resulting performance in your environment compared to the above may vary and depends upon the RS/6000 model, the I/O configuration, and associated workload of your applications. Attributes provided: 4 ports of 10/100 Base-Tx Ethernet Attributes required: 1 PCI slot For 7028-6C1: (#4961) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or later, AIX 5.1 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both (#4962) 10/100 Mbps Ethernet PCI Adapter II (No Longer Available as of March 31, 2006) The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports: After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This support is provided with AIX 5.1 (with appropriate software updates) and later software. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. If you are running with AIX 5.1, to invoke the IP Security function on the adapter, you must obtain AIX 5.1 software updates IY27069 and IY26514 or the 5100-02 Recommended Maintenance package. These updates can be obtained by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD (LCD4-1103-03) dated 4/2002 or later. Note: This IP Security function is not supported with AIX 4.3 software. Half / Full Duplex 10/100 Mbps Ethernet interface 10/100 Mbps data rates Auto-negotiation for 10/100 speed and half/full duplex Network boot capability and Network Install Manager (NIM) IEEE 802.3 Ethernet Specification IEEE 802.3u Fast Ethernet Specification 802.3x Ethernet flow control support Attributes provided: One 10/100 Mbps Ethernet port (connector) Attributes required: One PCI slot For 7028-6C1: (#4962) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both of these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software. (#4963) PCI Cryptographic Coprocessor (FIPS-4) (No Longer Available as of February 8, 2005) The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter which combines hardware and software to provide a wide variety of security services. The PCI Cryptographic Coprocessor (FIPS-4) is a second generation adapter of the Cryptographic Coprocessor family that provides high performance secure hardware engines for secure internet transactions such as transmitting data, verifying electronic signatures, bulk data encryption and decryption. In addition, the card is enclosed in a tamper proof enclosure to restrict access to on card resources, designed to FIPS 140-1 Level 4 standards. Security functions supported by the adapter include: DES (Data Encryption Standard) (40 and 56 bit key) encryption and decryption, with pre-and post-padding; the coprocessor uses both ECB (electronic and codebook) and CBC (cipher block chain) modes of encryption. MAC (Message Authentication) generation and MAC verification services Triple DES (three key) encryption and decryption of eight-byte units Secure RSA key-pair generation RSA signature generation and signature verification at 18 signatures/sec at 2048 bits Hardware random number generation Secure data storage and retrieval Other non-cryptographic security utilities can be carried out using the onboard processor As part of this adapter's physical security features, the following events will cause an adapter shutdown and secure data zeroization. Shipping/Storage Temperature less than -15C or greater than 95C Dead Battery (VBAT less than 2.4V) Supply Voltage greater than 3.3V/12V max Mesh Sensor opens/shorts detection X-ray exposure IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from the http://www.ibm.com/security/cryptocards website: PKCS #11 Version 2.01, an implementation of the industry-standard API IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry. Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to web site http://www.ibm.com/security/cryptocards. For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page: http://www.ibm.com/security/cryptocards Limitations: The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements. Attributes provided: Data encryption via PCI bus to host Attributes required: 1 PCI slot For 7028-6C1: (#4963) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#4964) PCI Cryptographic Coprocessor The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter combining hardware and software designed to provide high performance hardware engines for secure internet transactions such as data exchange, verifying electronic signatures, bulk data encryption and decryption. Cryptographic processes are performed within a tamper resistant enclosure on the adapter that is designed to meet FIPS PUB 140-1 standard for commercial cryptographic devices at Level 3. Security functions supported by the adapter includes: Data Encryption Standard (DES) (56 and 40 bit keys) encryption and decryption, with pre- and post-padding; the coprocessor uses both electronic and codebook (ECB) and cipher block chain (CBC) modes of encryption. Message Authentication (MAC) and financial PIN processing Triple DES encryption and decryption of general data RSA key-pair generation RSA signature generation and signature verification Secure Hashing Algorithm (SHA-1) in hardware Hardware random number generation Protected data storage and retrieval Other non-cryptographic security utilities can be carried out using the onboard processor IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from: http://www.ibm.com/security/cryptocards PKCS #11 Version 2.01, an implementation of the industry-standard API IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry. Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to: http://www.ibm.com/security/cryptocards. For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page: http://www.ibm.com/security/cryptocards Limitations: The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements. Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements: http://www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: Data encryption via PCI bus to host Attributes required: 1 PCI slot For 7028-6C1: (#4964) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2 ) OS level required: AIX V4.3.3 or 5.1 or later. For Linux informaion, refer to: http://www.ibm.com/servers/eservers/pseries/hardware/ factsfeatures.html   Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5001) Customer Service Specify This feature code specifies that the system will receive special request services from the Center for Customer Services (CCS) in Rochester. Attributes provided: Customization Attributes required: None For 7028-6C1: (#5001) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#5005) Software Preinstall Licensed programs may be preinstalled on the media selected. To order this option, specify code (#5005) on the initial system order. The preinstalled licensed programs will be at the same release level as programs being shipped from the Program Libraries at the time the system is manufactured. Attributes provided: None Attributes required: None For 7028-6C1: (#5005) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial (#5300) 1-Way 375MHz POWER3-II Processor Card (No Longer Available as of December 10, 2004) 1-way processor card with 375 MHz POWER3-II processor and 4 MB of L2 cache. Attributes provided: 1-way processor Attributes required: 1 processor card slot For 7028-6C1: (#5300) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#5309) 1-way 450MHz POWER3-II Processor Card (No Longer Available as of December 10, 2004) 1-Way processor card with 450 MHz POWER3-II processor with 8MB of L2 cache. Attributes provided: 1-way processor Attributes required: 1 processor card slot For 7028-6C1: (#5309) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#5322) 1-Way 333MHz POWER3-II Processor Card (No Longer Available as of December 10, 2004) 1-way processor card with 333 MHz POWER3-II processor and 4 MB of L2 cache. Attributes provided: 1-way processor Attributes required: 1 processor card slot For 7028-6C1: (#5322) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX V4.3.3 or 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5700) IBM Gigabit Ethernet-SX PCI-X Adapter The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connection with throughput on a standard shortwave multimode optical cable which conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5-micron Multi Mode Fiber (MMF) and 550m for 50.0-micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter. Note: For optimum performance, the adapter should be placed in a 64-bit PCI-X card slot. Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5-Micron Fiber Converter Cable (#2459) or LC-SC 50-Micron Fiber Converter Cable (#2456) is required. Limitation: Half-Duplex (HDX) mode is not supported. Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 7028-6C1: (#5700) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX 5.2 with the 12/2002 or later Update CD. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. Note: For optimum performance, adapter should be placed in a 64-bit PCI-X card slot. Limitations: The 1000 Mbps speed is not supported in Half-Duplex (HDX) mode. Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN. Attributes required: One available PCI or PCI-X card slot For 7028-6C1: (#5701) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX 5.2 with the 12/2002 or later Update CD. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses. To increase the data writing performance, a 40 MByte fast-write cache is provided as a resident part of this adapter. The 40 MByte fast-write cache is resident on the Dual Channel Ultra320 SCSI RAID Adapter and utilizes non-volatile RAM. The 40 MByte fast-write cache can provide an significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or external ports) are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrety. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL: http://techsupport.services.ibm.com/server/mdownload/ Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI RAID Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate configured as either a non-array or an array of disks. Also the two external ports provide non-array connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. Limitations: The two external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only non-array configuration support. The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal and external SCSI devices Attributes required: One PCI or PCI-X bus slot For 7028-6C1: (#5703) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: If Feature Number 9556 or Feature Number 6556 is not installed in the system, the Maximum Allowed and Inital order maximum is 4. (#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Limitations: The 1000 Mbps speed is not supported in Half-Duplex (HDX) mode. Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 7028-6C1: (#5706) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: For optimum 2-Port Gigabit Ethernet PCI-X Adapter performance, systems manufactured prior to December 6, 2002 may require a system firmware update. Check the following Web URL after December 6, 2002 to review and download latest firmware if needed. http://www.austin.ibm.com/support/micro/ If Feature Number 9556 or Feature Number 6556 is not installed in the system, the Maximum Allowed and Inital order maximum is 4. (#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter. A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided. The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) is the preferred solution. Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible. Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required. Limitation: Half-Duplex (HDX) mode is not supported. Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s). Attributes required: One available PCI or PCI-X card slot For 7028-6C1: (#5707) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: For optimum 2-Port Gigabit Ethernet PCI-X Adapter performance, systems manufactured prior to December 6, 2002 may require a system firmware update. Check the following Web URL after December 6, 2002 to review and download latest firmware if needed. http://www.austin.ibm.com/support/micro/ If Feature Number 9556 or Feature Number 6556 is not installed in the system, the Maximum Allowed and Inital order maximum is 4. (#5712) PCI-X Dual Channel Ultra320 SCSI Adapter (No Longer Available as of March 31, 2006) The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.), up to twice the maximum data transfer rate of the previous Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices can run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds. In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device. Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI Adapter. The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate. The two external ports also provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also the two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter. The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or RS/6000 systems. The adapter also supports target mode. Limitations: The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105. Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane. Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following web page URL: http://techsupport.services.ibm.com/server/mdownload/ Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices Attributes required: One available 3.3 volt PCI or PCI-X slot For 7028-6C1: (#5712) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No Note: If Feature Number 9556 or Feature Number 6556 is not installed in the system, the Maximum Allowed and Inital order maximum is 4. (#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses VXAtape** data cartridges and is compression capable, providing a capacity of up to 160 GB - a significant increase in capacity over the previous internal tape drives. Characteristics: Capacity: 80 GB native mode, 160 GB (typical) compression mode Form Factor: 5.25-inch half high Media: uses VXAtape data cartridges Technology: Helical scan, rotating head Operation: Streaming Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression Interface: SCSI-2 (LVD/SE) asynchronous/synchronous Compatability: 80 GB mode (Read/Write), 160 GB compression (Read/Write) Attributes provided: One 80/160 GB internal tape drive Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address For 7028-6C1: (#6120) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6134) 60/150 GB 16-bit 8mm Internal Tape Drive (No Longer Available as of March 31, 2005) The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch half-high, 16-bit tape drive. This drive provides a high capacity tape drive for save/restore and archiving functions. This tape drive uses IBM 8mm data cartridges and is compression capable, providing a capacity of up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm internal tape drive. Characteristics: Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode Form Factor: 5.25-inch Half-high Media: IBM 8mm Data Cartridge with Smart Clean Technology Technology: Helical Scan, Rotating Head Operation: Streaming Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical) Compression M Interface: SCSI-2 16-bit Low Voltage Differential(LVD) / Single-ended (SE) Asynchronous/Synchronous Compatibility: See the following Technical Support Web page (8mm Tape Interchange Information section) for compatability information: http://techsupport.services.ibm.com/server/mdownload/tapewhdr.html Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive Attributes required: One 1.6-inch(41mm) half-high media bay and one SCSI-2 internal 16-bit address For 7028-6C1: (#6134) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6156) 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel) (No Longer Available as of December 6, 2002) This feature consists of a 5.25-inch half-high, single-ended, 16-bit tape drive. This drive provides a high capacity tape drive for save/restore and archiving functions. This tape drive uses IBM 8mm data cartridges and is compression capable, providing a capacity of up to 40 GB -- a 400% increase over the previous 5/10 GB 8mm internal tape drive. (Black bezel) Characteristics: Capacity: 20.0 GB Native Mode, 40.0 GB (typical) Compression Mode Form Factor: 5.25-inch Half-high Media: IBM 8mm Data Cartridge Technology: Helical Scan, Rotating Head Operation: Streaming Data Transfer Rate: 3MB/Sec. Native Mode, 6MB/Sec. (typical) Compression M Interface: SCSI-2 16-bit (Single-ended) Asynchronous/Synchronous Compatibility: 2.3 GB Mode (Read only), 2.3 GB mode with Compression (Read only), 5 GB Mode (Read only), 5 GB Compression (Read only), 7 GB Mode (Read only), 7 GB Compression (Read only), 20 GB Mode (R/W), 20 GB Compression (R/W). Attributes provided: 8mm tape capability Attributes required: One 1.6-inch(41mm) half-high media bay and one SCSI-2 internal SE 16-bit address For 7028-6C1: (#6156) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#6158) 20/40GB 4mm Internal Tape Drive The 20/40 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 40 GB - a significant increase in capacity over the previous 12/24 4-mm internal tape drives (when using DDS-4 media). Characteristics Capacity: 20 GB native mode, 40 GB (typical) compression mode Form Factor: 5.25-inch half high Media: IBM 4-mm DDS-4 data cartridge Technology: Helical scan, rotating head Operation: Streaming Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression Interface: SCSI-2 (single ended) asynchronous/synchronous Compatibility: 4 GB mode (Read/Write), 8 GB compression (Read/Write); 12 GB mode(Read/Write), 24 GB compression (Read/Write), 20 GB mode (Read/Write), 40 GB compression (Read/Write). Note: MES orders are shipped with both a black and a white bezel. Attributes provided: 4mm tape capability Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 16-bit address For 7028-6C1: (#6158) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both (#6203) PCI Dual Channel Ultra3 SCSI Adapter (No Longer Available as of December 10, 2004) The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64-bit adapter and is an excellent solution for high-performance SCSI applications. The PCI Dual Channel Ultra3 SCSI Adapter provides two SCSI channels (busses). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external and will support a data rate of up to 160 MBytes per second, up to twice the maximum data transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes per second). In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this Ultra3 160 MBytes per second performance, all attaching devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2 and Ultra3 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface at the lower SE bus data rate of the device. Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE subsystems to allow connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI Adapter. Note: If any Single Ended (SE) SCSI subsystem is attached to an external port of this adapter, the SCSI port will auto-throttle to a "Fast" interface speed running no faster than 20MB/s maximum. This auto- throttle function is performed to ensure best signal quality between host adapter and attaching subsystem. The second external port is unaffected unless a SE subsystem is also attached to it. If so, it would also auto- throttle as described above. The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the supported pSeries or RS/6000 systems. Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices Attributes required: One available PCI slot For 7028-6C1: (#6203) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 0) OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or later, AIX 5.1 with Update CD LCD4-1103-01 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: MES only (#6204) PCI Universal Differential Ultra SCSI Adapter (No Longer Available as of December 30, 2005) The PCI Universal Differential Ultra SCSI Adapter is the latest technology advancement of an RS/6000 SCSI-2 differential adapter with a maximum data transfer rates of 40 MBytes per second. This adapter has the capability to be plugged into the newer +3.3 volt PCI slots as well as the older +5 volt PCI slots. Feature code # 6204 allows connection to external differential SCSI-2 F/W or Ultra SCSI type devices up to 25 meters away. Feature code # 6204 will negotiate with each external device and transfer data at the fastest SCSI data transfer rate capable by the external device. Check system sales pages as to which external differential subsystems are supported. The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048). Attributes provided: 15 external SCSI-2 addresses Attributes required: 1 PCI slot. For 7028-6C1: (#6204) Minimum required: 0 Maximum allowed: 5 (Initial order maximum: 5) OS level required: AIX 4.3.3 or AIX 5.1, or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: Both (#6206) PCI Single-Ended Ultra SCSI Adapter (No Longer Available as of December 10, 2004) The PCI Single-Ended Ultra SCSI Adapter (#6206) is an ideal solution for applications requiring large block data transfers (more than 64K block size) in a multi disk drive environment utilizing SCSI-2 protocol. FC #6206 has a maximum data transfer rate of 40 MBytes per second which is twice the maximum data transfer rate of SCSI-2 Fast/Wide adapters (20 MBytes per second). The PCI Single-Ended Ultra SCSI Adapter (#6206) conforms to the SCSI-2 standard and Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048). Note: If any Single Ended (SE) SCSI subsystem is attached to the external port of this adapter, the SCSI ports (both external and internal) will auto-throttle to a "Fast" interface speed running no faster than 20MB/s max. This auto-throttle function is performed to ensure best signal quality between host adapter and attaching subsystem. Limitation: Attachment of the IBM 2104 models DL1, TL1, DU3, or TU3 external disk subsystems to the external connector of this SCSI adapter is not supported when any device(s) are attached to the internal connector of the same adapter. Attributes provided: 15 internal or 15 external SCSI-2 addresses Attributes required: 1 PCI slot. For 7028-6C1: (#6206) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or 5.1, or later Initial Order/MES/Both/Supported: Both (#6228) 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus (No Longer Available as of December 10, 2004) The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a 64-bit address/data, short form factor PCI adapter with LC type external fiber connectors that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus will auto-negotiate for the highest data rate (either 1Gps or 2Gps) of which the device or switch is capable. Distances of up to 500 meters running at 1Gbps data rate and up to 300 meters running at 2Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1Gps or 2Gps data rates. The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC Fibre Channel Conversion Cable (#2456) is required. Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices. http://www.storage.ibm.com/hardsoft/disk/products.htm Consult with your IBM representative or Business Partner for additional information relative to any third party attachment. Attributes provided: 1 FC/FC-AL interface Attributes required: 1 empty PCI slot For 7028-6C1: (#6228) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: MES Fibre Channel boot capability is supported on this system with this adapter provided your system firmware and adapter firmware are at the proper support levels. Systems manufactured prior to November 30, 2001 may require a system and adapter firmware update. Check the following web URL to review and download latest firmware if needed. http://www.austin.ibm.com/support/micro Note: Fibre Channel boot also requires AIX 4.3.3 or AIX 5.1 at the September, 2001 maintenance level or later along with a disk subsystem on which this boot capability has been qualified. (#6230) Advanced SerialRAID Plus Adapter (No Longer Available as of June 24, 2005) The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop) Serial Storage Architecture (SSA) adapter providing an instantaneous data transfer rate of up to 160 MByte/s per loop. It also provides eight- initiator, non-RAID capability, two-initiator RAID 1, two-initiator RAID 0 + 1, two-initiator RAID 5, or one-initiator RAID 0 capability. The adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that improves write performance in RAID 0+1, RAID 5, and non-RAID applications. When the 32 MByte Fast-Write Cache Option Card is used, the adapter can be configured in either single or dual initiator fast- write cache mode. In dual initiator fast-write cache mode, if one of the two adapters fail, the failing adapter is designed to transfer control over to the other. Also, in dual initiator Fast Write Cache mode, the 128 MByte DRAM Option Card (#6231) is available and required to utilize the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte DRAM Option Card is not used in dual initiator fast-write cache mode, the effective fast-write cache capacity will be 16 MBytes on each adapter. See the 128 MByte DRAM Option Card (#6231) for information. The Advanced SerialRAID Plus Adapter when operated in a RAID 5 configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. When operated in a RAID 1 or RAID 0+1 configuration, will support up to eight disk drives mirrored. The adapter also supports Hot Spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter also supports connectivity to external disk enclosures and internal RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also supported (Refer to IBM 7133 Sales literature for additional information) Any supported RS/6000 system can be set up to boot from an Advanced SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included as part of the configuration. Other disks associated with the adapter can be RAID but at least one disk must be a non-RAID SSA disk. The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. If your system is running with AIX 4.3.3 or later software, native boot capability is supported. For factory system orders with AIX preload requested, an internal SCSI disk drive will be preloaded as the native boot disk even if internal SSA disk drive(s) are present. If your system is running with AIX 4.2.1 or AIX 4.3.2 software, the below procedure applies in order to boot using the Advanced SerialRAID Plus Adapter: The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. A supported AIX version of software (with proper updates) must be loaded to the non-RAID SSA disk using AIX's Network Install Manager (NIM) before booting from the non-RAID disk. The system with a non-RAID SSA disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation. Once AIX with updates is installed on the non-RAID SSA disk and the system is configured for booting, booting will take place from the boot disk without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time. A 3-Way Copy Function allows a user to create a third copy to an existing RAID-1 or RAID 0+1 array while mirrored operation continues. 3-Way Copy allows the user, at any time after the copy process has completed, to split the third copy off from the original RAID-1 or RAID 0+1 array to form an independent RAID copy. This third copy or "snapshot" copy could be typically used to perform a backup or to test some new application. The 3-Way Copy Function is available only via a code download and can only be gained by going to the SSA web support pages defined below. When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems. These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system. http://www.storage.ibm.com/hardsoft/products/ssa/ The above link contains links to SSA publications and other SSA Web sites, including the one below. http://www.storage.ibm.com/hardsoft/products/ssa/rs6k/index.html The above link contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments. LIMITATION: Internal ports on the adapter are not supported. See machine/model specific information to determine if internal SSA disk drives and associated hardware/cables are supported. Attributes provided: Attachment of SSA devices Attributes required: One PCI bus slot For 7028-6C1: (#6230) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#6231) 128 MByte DRAM Option Card (No Longer Available as of June 24, 2005) The 128 MByte DRAM Option Card (#6231) is a field only optional feature to the Advanced SerialRAID Adapter (#6225) or a factory or field option for the Advanced SerialRAID Plus Adapter (#6230). This option is recommended for dual initiator fail-over Fast Write Cache (FWC) configurations. The option increases the existing DRAM on the adapter to 128 MBytes. In this type of dual initiator FWC configuration, the existing DRAM does not have enough capacity to completely contain a copy of each adapter's 32 MByte FWC and also provide additional working space. The 128 MByte DRAM Option Card provides this additional space needed to contain a full copy of each adapters 32 MByte FWC content and allows for full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card (#6231) is not used with dual-initiator FWC configurations, the effective FWC capacity is reduced to 16 MBytes per adapter. If this feature is ordered as a field upgrade to an existing SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software and publications are also provided. Attributes provided: 128 MByte DRAM memory Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card (#6235) is also recommended. For 7028-6C1: (#6231) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#6235) 32 MByte Fast-Write Cache Option Card (No Longer Available as of June 24, 2005) The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast- write optional feature that plugs into the IBM RS/6000 Advanced SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus (#6230). It utilizes non-volatile RAM. During the unlikely event of an Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter insuring data integrity. The 32 MByte Fast-Write Cache Option Card can provide a significant improvement of data throughput and response time during certain sequence write operations compared to SSA RAID adapters without the fast-write cache. The response time and data transfer improvement using the optional card will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (#6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single- initiator or dual initiator configurations. Attributes provided: None Attributes required: One Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230). For 7028-6C1: (#6235) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter (No Longer Available as of December 30, 2005) The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gbps or 2 Gbps data rates. The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber onnector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required. Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices. http://www.storage.ibm.com/hardsoft/disk/products.htm Consult with your IBM representative or Business Partner for additional information relative to any third party attachment. Attributes provided: 1 Fibre Channel/FC-AL interface Attributes required: 1 empty PCI or PCI-X slot For 7028-6C1: (#6239) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 5.1 or later, AIX 5.2 or later. Linux - Refer to the following URL for systems and features that operate with Linux: www.ibm.com/servers/eserver/pseries/hardware/factsfeatures.html Initial Order/MES/Both/Supported: MES CSU: Yes Return parts MES: No Note: Fibre Channel boot capability is supported on this system with this adapter provided your system firmware is at the proper support level. Systems manufactured prior to November 30, 2001, may require a system firmware update. Check the following Web URL to review and download latest firmware if needed. http://www.austin.ibm.com/support/micro/ Note: Fibre Channel boot requires AIX 5.1 at the September, 2001, maintenance level or later along with a disk subsystem on which this boot capability has been qualified. (#6275) Power Supply, 250 Watt AC, Hot-swap, Redundant (No Longer Available as of December 10, 2004) This feature provides a 250 watt AC power supply for redundant power. Attributes provided: 250 Watt AC Redundant Power Supply Attributes required: Available Power Supply Bay For 7028-6C1: (#6275) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX V4.3.3 or 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6277) Power Supply, 250 Watt AC, Hot-swap, Base (No Longer Available as of December 10, 2004) This feature provides a 250 watt AC power supply. Attributes provided: 250 Watt AC Power Supply Attributes required: Available Power Supply Bay For 7028-6C1: (#6277) Minimum required: 2 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX V4.3.3 or 5.1, or later Initial Order/MES/Both/Supported: Initial (#6310) IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (No Longer Available as of June 25, 2004) Provides voice processing for up to four T1 or E1 digital trunks, providing connectivity for 96 (T1) or 120 (E1) voice channels in a single PCI slot. The voice processing function is provided by Voice Response for AIX LPP. Several network attachment cables are available in support of this adapter and the correct cable should be selected for either T1 or E1networks. (Select from cable features: 2709 (T1,RJ-45), 2710 (E1, RJ-45), 2871/2872 (T1, 100 ohm), 2873/2874 (E1, 120 ohm). Note: When more than one IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered, the Artic960RxD Quad DTA, H.100, 4-drop Cable (#2877) is required. Note: When a Digital Trunk Quad PCI adapter (#6309) is already present and an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered, an IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879) are required. Note: When an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered and an IBM ARTIC960RxD DSP Resource PCI Adapter (#2949) is already present, the IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and the IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879) are required. Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements: http://www.ibm.com/servers/aix/os/adapters/51.html Attributes provided: Connection of 1 to 4 T1/E1 Trunks Attributes required: Available PCI slot, appropriate cables and WebSphere Voice Response for AIX LPP application software. For 7028-6C1: (#6310) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: Yes Return parts MES: No (#6566) Mounting Hardware for Disk in Media Bay (No Longer Available as of December 10, 2004) This feature code will provide the mounting hardware and external filler needed to mount any valid disk drive in an available media bay. Attributes provided: Mounting of a valid disk drive in a media bay. Attributes required: 1 empty media drive bay For 7028-6C1: (#6566) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#6567) Ultra3 SCSI Backplane for Hot-swap Disks (No Longer Available as of December 10, 2004) This feature provides a backplane that allows the installation of hot- swap disks in the system. Attributes provided: Ultra3 SCSI Backplane Attributes required: For 7028-6C1: (#6567) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX V4.3.3 or 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#7305) AAP Software Pre-Install Indicator Software pre-install indicator for Authorized Assemblers Attributes provided: Software Preinstall Attributes required: Authorized Assembler Order For 7028-6C1: (#7305) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial (#7779) OEM Publications for IBM Logo Product This feature provides OEM publications with a product shipping with IBM nomenclature. Attributes provided: OEM Publications Attributes required: None For 7028-6C1: (#7779) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#8091) 1-way 450MHz POWER3-II Processor Card, Express Configurations, Factory Only (No Longer Available as of March 9, 2004) Provides a 1-way processor card with 450 MHz POWER3-II processor, with 8MB of L2 cache for systems being included in Express Configurations. Equivalent to #5309. Attributes provided: 1-way processor equivalent to #5309. Attributes required: 1 processor card slot. For 7028-6C1: (#8091) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: If #8096 is selected, Minimum Required must equal 1. (#8092) 1-way 450MHz POWER3-II Processor Card, Express Configurations, Factory Only (No Longer Available as of March 9, 2004) Provides a 1-way processor card with 450 MHz POWER3-II processor, with 8MB of L2 cache for systems being included in Express Configurations. Equivalent to #5309. Attributes provided: 1-way processor equivalent to #5309. Attributes required: 1 processor card slot. For 7028-6C1: (#8092) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: If #8097, #8098, or #8099 is selected, Minimum Required must equal 2. (#8093) 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only (No Longer Available as of March 9, 2004) Provides 1024MB of system memory with 2 512MB DIMMs for systems being included in Express Configurations. Equivalent to #4121. Attributes provided: 1024MB of system memory equivalent to #4121. Attributes required: Two empty memory DIMM positions. For 7028-6C1: (#8093) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: If #8096 is selected, Minimum Required must equal 1. (#8094) 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only (No Longer Available as of March 9, 2004) Provides 1024MB of system memory with 2 512MB DIMMs for systems being included in Express Configurations. Equivalent to #4121. Attributes provided: 1024MB of system memory equivalent to #4121. Attributes required: Two empty memory DIMM positions. For 7028-6C1: (#8094) Minimum required: 0 Maximum allowed: 2 (Initial order maximum: 2) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: If #8097 or #8099 is selected, Minimum Required must equal 2. (#8095) 1024MB (2x512MB) DIMMs, Express Configurations, Factory Only (No Longer Available as of March 9, 2004) Provides 1024MB of system memory with 2 512MB DIMMs for systems being included in Express Configurations. Equivalent to #4121. Attributes provided: 1024MB of system memory equivalent to #4121. Attributes required: Two empty memory DIMM positions. For 7028-6C1: (#8095) Minimum required: 0 Maximum allowed: 4 (Initial order maximum: 4) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply Note: If #8098 selected, Minimum Required must equal 4. (#8096) Express Configuration -- pSeries 610 (100C/100E) (No Longer Available as of March 9, 2004) Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of: 1 x #8091 (1-way 450 MHz POWER3-II processor) 1 x #8093 (1024MB memory DIMMs) 1 x #3264 (36.4GB hot-swap disk drive) 1 x #6275 (Redundant power supply) Attributes provided: None Attributes required: None For 7028-6C1: (#8096) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#8097) Express Configuration -- pSeries 610 (200C/200E) (No Longer Available as of March 9, 2004) Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of: 2 x #8092 (1-way 450 MHz POWER3-II processor) 2 x #8094 (1024MB memory DIMMs) 2 x #3264 (36.4GB hot-swap disk drive) 1 x #6275 (Redundant power supply) Attributes provided: None Attributes required: None For 7028-6C1: (#8097) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#8098) Express Configuration -- pSeries 610 (250C/250E) (No Longer Available as of March 9, 2004) Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of: 2 x #8092 (1-way 450 MHz POWER3-II processor) 4 x #8095 (1024MB memory DIMMs) 2 x #3265 (73.4GB hot-swap disk drive) 1 x #6275 (Redundant power supply) Attributes provided: None Attributes required: None For 7028-6C1: (#8098) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#8099) Express Configuration -- pSeries 610 (125C/125E) RAID Applications (No Longer Available as of March 9, 2004) Express Configuration for the pSeries 610 Model 6E1/6C1. Consists of: 1 x #8091 (1-way 450 MHz POWER3-II processor) 2 x #8094 (1024MB memory DIMMs) 1 x #3119 (36.4GB disk drive) 6 x #3264 (36.4GB hot-swap disk drive) 1 x #6275 (Redundant power supply) 1 x #2498 (Ultra3 SCSI RAID Adapter) Attributes provided: None Attributes required: None For 7028-6C1: (#8099) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Initial CSU: Does not apply Return parts MES: Does not apply (#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter This cable provides attachment between the 128-port Asynchronous Controller and the first RAN in a daisy chain, or attachment between RANs in the daisy chain. Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain. For 7028-6C1: (#8131) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch) This cable may be substituted for the 4.5 meter (15 foot) async controller cable whenever a customer configuration requires stacked Remote Async Nodes. Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain. For 7028-6C1: (#8132) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8133) RJ-45 to DB-25 Converter Cable This cable can be used to attach EIA-232 devices to the 16 port EIA 232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async subsystem. This cable provides a 25-pin D shell connector for device attachment. Four cables are provided per each order. Attributes provided: 4 DB-25 EIA-232 ports Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136) For 7028-6C1: (#8133) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (No Longer Available as of March 31, 2006) The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a modified version of the existing 16-port Remote Async Node (feature #8130 or 8134) in an industry-standard 19-inch rack mount chassis to allow simpler installation and ease-of-use. Like the existing RAN, it can also be configured as a desktop device. As an additional benefit, the metal chassis meets FCC Class B/CISPR B when used with similarly rated RS/6000 host to meet the needs of customers with these requirements. The RANs provide 16 ports of EIA-232 capability with full modem controls on each port and are connected to the 128-port Async Controller (Micro Channel or ISA versions) residing in the host. RANs are connected in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either version). The rack-mountable RAN offers these enhanced features: Industry-standard 19-inch rack mountable chassis (can be configured for stacking on a desktop or mounted in a 19-inch rack). Meets FCC Class B/CISPR B when used with similarly rated RS/6000 host. All RJ-45 connectors are now on the front panel, greatly enhancing cable management. The DB-15 synchronous connectors (cabling from host to RAN and between RANs) and the power cord and switch are located on the rear panel. Power supply is self contained within the unit. The rack-mountable RAN offers these same features as the existing RAN product: Identical function and support as existing 16-port Remote Async Node (RAN), feature #8130 or 8134. Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel or ISA host adapter. Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel. Built-in diagnostics can test ports independent of RS/6000 host. Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI. The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes. Individual ports support a maximum EIA-232 distance of 62 meters (200 feet). Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer-supplied cables. Location of RAN up to 330 meters from the host using standard shielded 8-wire twisted pair cabling. Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host. Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN connection Attributes required: 1 RAN-to-128-port Controller connection OR 1 RAN-to-RAN connection For 7028-6C1: (#8136) Minimum required: 0 Maximum allowed: 40 (Initial order maximum: 40) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both Note: Maximum of 8 per #2944 -- 128-port asynch adapter. (#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232 (No Longer Available as of March 31, 2006) Provides remote connection of up to 16 EIA-232 devices to a 128-Port Asynchronous Controller. Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate. Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel, ISA or PCI host adapter. Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel. Built-in diagnostics can test ports independent of RS/6000 host. Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI. The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes. Individual ports support a maximum EIA-232 distance of up to 31 meters (100 feet), depending on the baud rate. Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables. Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps) from host using standard shielded 8-wire twisted pair cabling. Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host. Attributes provided: 16 EIA-232 Async ports Attributes required: One 128-port adapter per eight (#8137s) For 7028-6C1: (#8137) Minimum required: 0 Maximum allowed: No max (Initial order maximum: No max) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8700) Quiet Touch Keyboard - Business Black, US English, #103P Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8700) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8701) Quiet Touch Keyboard - Business Black, French, #189 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8701) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8702) Quiet Touch Keyboard - Business Black, Italian, #142 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8702) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8703) Quiet Touch Keyboard - Business Black, German/Austrian, #129 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8703) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8704) Quiet Touch Keyboard - Business Black, UK English, #166 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8704) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8705) Quiet Touch Keyboard - Business Black, Spanish, #172 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8705) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8706) Quiet Touch Keyboard - Business Black, Japanese, #194 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8706) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8707) Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8707) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8708) Quiet Touch Keyboard - Business Black, Canadian French, #058 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8708) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8709) Quiet Touch Keyboard - Business Black, Belgian/French, #120 (No Longer Available as of April 26, 2002) Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8709) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8710) Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8710) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8711) Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8711) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8712) Quiet Touch Keyboard - Business Black, Danish, #159 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8712) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8713) Quiet Touch Keyboard - Business Black, Bulgarian, #442 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8713) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8714) Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8714) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8716) Quiet Touch Keyboard - Business Black, Norwegian, #155 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8716) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8717) Quiet Touch Keyboard - Business Black, Dutch, #143 (No Longer Available as of April 26, 2002) Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8717) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8718) Quiet Touch Keyboard - Business Black, Portuguese, #163 Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8718) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8719) Quiet Touch Keyboard - Business Black, Greek, #319 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8719) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8720) Quiet Touch Keyboard - Business Black, Hebrew, #212 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8720) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8721) Quiet Touch Keyboard - Business Black, Hungarian, #208 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8721) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8722) Quiet Touch Keyboard - Business Black, Icelandic, #197 (No Longer Available as of April 26, 2002) Attributes provided: Quiet and soft-touch key depression, Euro currency key, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8722) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8723) Quiet Touch Keyboard - Business Black, Polish, #214 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8723) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8724) Quiet Touch Keyboard - Business Black, Romanian, #446 (No Longer Available as of April 26, 2002) Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8724) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8725) Quiet Touch Keyboard - Business Black, Slovakian, #245 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8725) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8726) Quiet Touch Keyboard - Business Black, Czech, #243 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8726) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8727) Quiet Touch Keyboard - Business Black, Turkish, #179 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8727) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8728) Quiet Touch Keyboard - Business Black, Turkish, #440 (No Longer Available as of April 26, 2002) Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8728) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8729) Quiet Touch Keyboard - Business Black, LA Spanish, #171 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8729) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8730) Quiet Touch Keyboard - Business Black, Arabic, #238 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8730) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8732) Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118 (No Longer Available as of April 26, 2002) Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8732) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8733) Quiet Touch Keyboard - Business Black, Korean, #413 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8733) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8734) Quiet Touch Keyboard - Business Black, Chinese/US, #467 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8734) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8735) Quiet Touch Keyboard - Business Black, French Canadian, #445 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8735) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8736) Quiet Touch Keyboard - Business Black, Thailand, #191 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8736) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8738) Quiet Touch Keyboard - Business Black, Russian, #443 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8738) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8739) Quiet Touch Keyboard - Business Black, Croatian, #105 Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8739) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both CSU: No Return parts MES: No (#8740) Quiet Touch Keyboard - Business Black, US English ISO9995, #103P Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. Attributes required: Supported RS/6000 system with proper AIX operating system installed. For 7028-6C1: (#8740) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#8741) 3-Button Mouse - Business Black 3-button dynamic tracking pointing device, utilizes opto-mechanical technology, resolution is 320 DPI, 3-meter cable, Business Black color, standard 6-pin mini-DIN connection. Attributes provided: Mouse capability Attributes required: Mouse port For 7028-6C1: (#8741) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#9004) Southern Hemisphere Designator for Monitors Specifies that southern hemisphere models are required for all monitors on the initial plant order or on MES orders. Attributes provided: None Attributes required: Monitor For 7028-6C1: (#9004) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: AIX 4.3.3 or AIX 5.1, or later Initial Order/MES/Both/Supported: Both (#9300) Language Group Specify - US English English language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9300) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9703) Language Group Specify - French French language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9703) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9704) Language Group Specify - German German language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9704) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9705) Language Group Specify - Polish Polish language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 7028-6C1: (#9705) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9707) Language Group Specify - Portuguese Portuguese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9707) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9708) Language Group Specify - Spanish Spanish language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9708) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9711) Language Group Specify - Italian Italian language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9711) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9712) Language Group Specify - Canadian French Canadian French language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9712) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9714) Language Group Specify - Japanese Japanese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9714) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9715) Language Group Specify - Traditional Chinese (Taiwan) Traditional Chinese language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9715) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9716) Language Group Specify - Korean Korean language group for Nomenclature and Standard Publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9716) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9719) Language Group Specify - Hungarian Hungarian language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 7028-6C1: (#9719) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9720) Language Group Specify - Slovakian Slovakian language group for Nomenclature and Standard Publications. Attributes provided: none Attributes required: none For 7028-6C1: (#9720) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9721) Language Group Specify - Russian Russian language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9721) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9722) Language Group Specify - Simplified Chinese (PRC) Simplified Chinese language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9722) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9724) Language Group Specify - Czech Czech language group for nomenclature and standard publications. Attributes provided: None Attributes required: None For 7028-6C1: (#9724) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Initial (#9800) Power Cord Specify - United States/Canada The following countries use the #9800 power cord to power the system unit and/or peripheral features requiring a power cord. DOM U.S. 649 CANADA 832 SAUDI ARABIA 619 BAHAMAS 621 BARBADOS 627 BERMUDA 629 BOLIVIA 631 BRAZIL 661 COLOMBIA 663 COSTA RICA 681 DOMINICAN REPUBLIC 683 ECUADOR 829 EL SALVADOR 731 GUATEMALA 640 GUYANA 735 HONDURAS 759 JAMAICA 781 MEXICO 791 NETHERLANDS ANTILLES 811 PANAMA 843 SURINAM 859 TRINIDAD 871 VENEZUELA 760 JAPAN 761 JAPAN (PDS) 766 KOREA 818 PHILIPPINES 858 TAIWAN Attributes provided: power cord Attributes required: None For 7028-6C1: (#9800) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9802) Power Cord Specify - Brazil (125V, 15A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9802) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both CSU: Does not apply Return parts MES: Does not apply (#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9820) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9821) Power Cord Specify - Denmark (250V, 10A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9821) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9825) Power Cord Specify - United Kingdom (250V, 13A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9825) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9827) Power Cord Specify - Israel (250V, 6-16A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9827) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9828) Power Cord Specify - Switzerland (250V, 10A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9828) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9829) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9830) Power Cord Specify - Italy (250V, 10A and 16A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9830) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9831) Power Cord Specify - Argentina (250V, 10A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9831) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9833) Power Cord Specify - Thailand (250V, 15A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9833) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9834) Power Cord Specify - Uruguay (250V, 10A) Attributes provided: power cord Attributes required: None For 7028-6C1: (#9834) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9900) Power Cord (4M) Specify -- United States/Canada The following countries use the #9900 power cord to power the system unit and/or peripheral features requiring a power cord. DOM U.S. 649 Canada 832 Saudi Arabia 619 Bahamas 621 Barbados 627 Bermuda 629 Bolivia 631 Brazil 661 Colombia 663 Costa Rica 681 Dominican Republic 683 Ecuador 829 El Salvador 731 Guatemala 640 Guyana 735 Honduras 759 Jamaica 760 Japan 761 Japan (PDS) 781 Mexico 791 Netherlands Antilles 811 Panama 843 Surinam 859 Trinidad 871 Venezuela 766 Korea 818 Philippines 858 Taiwan Attributes provided: Power Cord Attributes required: None For 7028-6C1: (#9900) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9901) Power Cord (4M) Specify -- EMEA Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9901) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9902) Power Cord (4M) Specify -- Denmark Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9902) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9903) Power Cord (4M) Specify -- U.K. and Others Attributes provided: Power Cord Attributes required: None For 7028-6C1: (#9903) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9904) Power Cord (4M) Specify -- Israel Attributes provided: Power Cord Attributes required: None For 7028-6C1: (#9904) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9905) Power Cord (4M) Specify -- Switzerland Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9905) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9906) Power Cord (4M) Specify -- India and Others Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9906) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9907) Power Cord (4M) Specify -- Italy Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9907) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9908) Power Cord (4M) Specify -- Australia and Others Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9908) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9909) Power Cord (4M) Specify -- Thailand Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9909) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both (#9911) Power Cord (4M) Specify -- All (Standard rack power cord) Attributes provided: Power cord Attributes required: None For 7028-6C1: (#9911) Minimum required: 0 Maximum allowed: 1 (Initial order maximum: 1) OS level required: None Initial Order/MES/Both/Supported: Both Feature Exchanges Not available. Back to top   Accessories None. Customer Replacement Parts None. Back to top   Machine Elements None. Back to top   Supplies None. Diskettes None. Trademarks (R), (TM), * Trademark or registered trademark of International Business Machines Corporation. ** Company, product, or service name may be a trademark or service mark of others. Windows is a trademark of Microsoft Corporation. UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.  © IBM Corporation 2005. Back to top