The Ultrium Tape 2U Autoloader 3581 is an external stand-alone or
rack-mountable unit and contains a Linear Tape-Open (LTO) Ultrium tape
drive designed for the heavy demands of backup tape storage. The Ultrium
Tape 2U Autoloader 3581 capacity is eight tape cartridges, providing a
media capacity of up to 1.6 TB (3.2 TB with 2:1 compression) data storage
per unit. It is supported for Small Computer Systems Interface (SCSI)
for Fibre channel attachment to iSeries, AS/400, pSeries, RS/6000,
xSeries, Netfinity, HP, Sun, UNIX, and PC servers.
The Ultrium Tape 2U Autoloader 3581 Models L28 and F28 incorporate
the IBM LTO Ultrium 2 Tape Drive. The IBM LTO Ultrium 2 Tape Drive is
the second generation LTO Ultrium Tape Drive in the IBM TotalStorage LTO
Ultrium family of products. The Ultrium 2 Tape Drive offers the
following significant improvements over the Ultrium 1 Tape Drive:
- Tape drive performance is more than doubled, up to 35 MB/sec native
data transfer rate (70 MB/sec with 2:1 compression). IBM Ultrium 2 Tape
Drives can read and write original LTO Ultrium Data Cartridges at
original Ultrium 1 capacities and with improved performance up to 20
MB/sec native data transfer rate (40 MB/sec with 2:1 compression).
Note: Although the Ultrium Tape 2U Autoloader 3581 provides the
capability for high tape performance, the actual throughput is a function
of many components, such as system processor, disk data rate, data block
size, data compressibility, I/O attachments, and the system or
application software used. For example, the HVD Ultra SCSI converter
interface has a maximum data transfer rate of 40 MB/sec, so Ultrium Tape
Drives on that SCSI interface will have a lower data transfer rate. The
compression technology used in the tape drive can typically double the
amount of data that can be stored on the media; however, the actual
degree of compression achieved is highly sensitive to the characteristics
of the data being compressed.
- The tape cartridge capacity is doubled over the original Ultrium Data
Cartridge up to 200 GB native capacity (400 GB with 2:1 compression),
with the use of the new IBM TotalStorage LTO Ultrium 200 GB Data
Cartridge. Both cartridges have been designed to provide several
enhancements over previous tape technologies. They are designed to work
with tape drives that have increased tape speeds and high-density data
recording. The tape itself is an advanced metal particle tape developed
for durability and capacity.
- Digital speed matching - The Ultrium 2 Tape Drive will perform
dynamic speed matching to adjust the drive's native data rate as closely
as possible to the net host data rate (after data compressibility has
been factored out). This offers the dual benefit of reducing the number
of backhitch repositions and improving throughput performance.
- Power management - The Ultrium 2 Tape Drive power management function
controls the drive's electronics to be either completely turned off or to
be in a low-power mode. These power modes occur only when the circuit
functions are not needed for drive operation.
- Channel calibration - The Ultrium 2 Tape Drive channel calibration
feature allows for customization of each read/write data channel for
optimum performance. The customization enables compensation for
variations in the recording channel transfer function, media
characteristics, and read/write head characteristics.
- Separate writing of multiple filemarks - Separate writing of multiple
filemarks causes any write command of two or more filemarks to cause a
separate data set to be written containing all filemarks after the first.
This feature has two advantages, first it can improve performance if a
subsequent append overwrites somewhere after the first filemark. Second,
write of multiple filemarks typically indicates a point where an append
operation might occur after the first of these filemarks. This change
prevents having to rewrite datasets containing customer data and the
first filemark in cases if such an append occurs.
- Ultrium 1 cartridge compatibility - The Ultrium 2 Tape Drive can read
and write on Ultrium 1 cartridges with improved transfer rates.
- LVD Ultra160 SCSI and HVD Ultra SCSI attachment - The Model L28 comes
with an LVD Ultra160 SCSI attachment, while feature code 3104 provides a
HVD Ultra SCSI attachment, for connection to a wide spectrum of open
system servers. The Model F28 comes with native switched fabric 2Gb
Fibre Channel attachment. They are supported on AIX, OS/400, Sun
Solaris, HP-UX, Microsoft Windows 2000, Windows 2003, Linux, and other
open systems.
- Larger internal data buffer - There is a 64 MB internal data buffer
in the Ultrium 2 Tape Drive as compared to a 32 MB internal data buffer
in the Ultrium 1 Tape Drive.
- Faster cartridge fill times (for both Ultrium 1 and Ultrium 2 data
cartridges) - The Ultrium 2 Tape Drive can fill an Ultrium 200 GB data
cartridge 12% faster, with a sustained data rate 128% better when
compared to the Ultrium 1 Tape Drive filling an Ultrium 100 GB data
cartridge. The Ultrium 2 Tape Drive can fill an Ultrium 100 GB data
cartridge 25% faster, with a sustained data rate 33% better, when
compared to the Ultrium 1 Tape Drive. The Ultrium 2 Tape Drive can fill
an Ultrium 200 GB data cartridge in 1 hour 44 minutes with a sustained
data rate of 122.8 GB per hour. The Ultrium 2 Tape Drive can fill an
Ultrium 1 100 GB data cartridge in 1 hour 29 minutes with a sustained
data rate of 71.9 GB per hour. The Ultrium 1 Tape Drive can fill an
Ultrium 1 100 GB data cartridge in 2 hours with a sustained data rate of
53.8 GB per hr.
- Faster data access, rewind, and load times - The Ultrium 2 Tape Drive
has the following improvements:
Ultrium 2 Ultrium 1
---------- -----------
Cartridge Load Time 15 seconds 18 seconds
Maximum Rewind Time 80 seconds 110 seconds
Average File Access Time 49 seconds 73 seconds
IBM LTO Ultrium 1 features enhanced in IBM LTO Ultrium 2 Tape Drive
include:
- Servo and track layout technology - There are 512 data tracks in
Ultrium 2 verses 384 data tracks in Ultrium 1.
- Surface Control Guiding Mechanism - IBM's patented Surface Control
Guiding Mechanism guides the tape along the tape path in the Ultrium Tape
2U Autoloader 3581. This method uses the surface of the tape, rather
than the edges, to control tape motion. This results in less tape damage
(especially to the edges of the tape) and less tape debris, which comes
from the damaged edges and can accumulate in the head area.
- Magneto Resistive (MR) head design - Use of flat lap head technology
in MR heads for Ultrium 2 minimize contact and wear on the tape as it
moves over the read/write heads.
- LTO Data Compression (LTO-DC) - The Ultrium 2 uses LTO-DC which is an
implementation of a Lempel-Ziv class 1 (LZ-1) data compression algorithm.
LTO-DC is an extension of Adaptive Lossless Data Compression (ALDC) and
an improvement over previous lossless compression algorithms. As users
of LTO-DC, you can expect to achieve better data compression.
- LTO Cartridge Memory (LTO-CM) - Contained within the LTO Ultrium data
cartridge is the LTO-CM, which is a passive, contactless silicon storage
device that is physically a part of the cartridge. The LTO-CM is used to
hold information about that specific cartridge, the media in the
cartridge, and the data on the media. The storage capacity of the LTO-CM
is 4,096 bytes. Communication between the drive and the LTO-CM is via a
low-level RF field transmitted by the drive to the cartridge.
- Statistical Analysis and Reporting System (SARS) - The Ultrium 2 Tape
Drive uses SARS to assist in isolating failures between media and
hardware. SARS uses the cartridge performance history saved in the CM
module and the drive performance history kept in the drive flash EEPROM
to determine the cause of failure. SARS can cause the drive to mark the
media as degraded, and to indicate that the hardware has degraded.
With support for IBM LTO Ultrium-format tape data cartridges, the
Ultrium Tape 2U Autoloader 3581 provides an excellent migration path from
digital linear tape (DLT or SDLT) 1/4-inch, 4mm, or 8mm/AIT tape drives.
It is a cost-effective solution for backup, save and restore, and
archiving functions.
Additional information
All offers are subject to availability. IBM reserves the right to
alter product offerings and specifications at any time without notice.
IBM is not responsible for photographic or typographic errors.
IBM makes no representation or warranty regarding third-party products
or services.
Back to top
Product Positioning
|
As you compare competitive tape solutions, consider:
- Capacity and performance requirements
- Data protection, reliability, and availability
- Storage usage and application requirements
- Affordability
- Loyalty to legacy or existing tape formats
The Ultrium Tape 2U Autoloader 3581 and storage management
applications address these requirements and constitute a functionally
rich tape storage solution incorporating LTO Ultrium tape technology.
You also gain flexibility of tape library management and unattended save
and restore operations. The IBM TotalStorage Ultrium Tape 2U Autoloader
3581 is an excellent solution if you use tape or require a
larger-capacity or higher-performance tape backup with or without random
access. The 3581 models are an excellent choice for tape automation for
pSeries, RS/6000, iSeries, AS/400, xSeries, and other popular open
systems.
The Ultrium Tape 2U Autoloader 3581 offers one IBM TotalStorage LTO
Ultrium 2 Tape Drive and eight cartridge slots with an autoloader
capacity of 3.2 TB (with 2:1 compression) or 1.6 TB native.
The 3581 can be the answer to growing storage requirements and
shrinking backup windows, and is part of a family of IBM TotalStorage LTO
Ultrium tape products. The 3581 Autoloader constitutes an excellent tape
storage solution if you have an existing digital linear tape experience
or require high-performance automated tape backup. In addition to
reading and writing on IBM LTO Ultrium-format tape cartridges, the 3581
tape 2U autoloader provides an enhanced functional alternative to
DLT/SDLT 1/4-inch, 4mm, 8mm/AIT, or IBM Magstar MP 3570 tape drives.
For capacity requirements less than 400 GB (compressed), the external
IBM TotalStorage Ultrium Tape Drive 3580 should be considered.
For capacity requirements greater than 3.2 TB (compressed), the IBM
TotalStorage Ultrium Tape Library 3582 should be considered with its one
or two IBM Ultrium 2 tape drives and 24 cartridge slots, with a capacity
of 4.8 TB native to 9.6 TB (compressed) in an entry-level automation
library.
For capacity requirements greater than 7.2 TB (compressed) and
scalable drives and numbers of cartridges, the IBM TotalStorage Ultrium
Scalable Tape Library 3583 and IBM TotalStorage UltraScalable Tape
Library 3584 should be considered. You can tailor the TotalStorage
Ultrium Scalable Tape Library 3583 to address system capacity and
performance needs of 7.2 TB, 14.4 TB, and 28.8 TB (with 2:1 compression),
on 3583 Models L18, L36, and L72 respectively, using up to six IBM LTO
Ultrium tape drives. The IBM TotalStorage UltraScalable Tape Library
3584 can address system capacity and performance requirement from 28 TB
to 496 TB (56 TB to 992 TB with 2:1 compression) using up to 192 IBM
Ultrium tape drive in up to sixteen 3584 library frames.
For protection of mission-critical data and hardware, optimized for
enterprise multi-mode and host attachment, high-cycle and start/stop
intensive tape applications, consider the IBM TotalStorage Enterprise
Tape Drive 3590 or 3592 or the IBM TotalStorage Enterprise Automated Tape
Library 3494.
Back to top
Models
|
Model Summary Matrix
Models |
Attachment |
L28 |
LVD Ultra 160 SCSI |
F28 |
Native Switched Fabric Fibre Channel |
Customer Setup (CSU)
Yes.
Devices Supported
None.
Model Conversions
None.
Back to top
Technical Description
|
The Ultrium Tape 2U Autoloader 3581 is a high-performance, reliable,
autoloader tape subsystem. Designed for unattended operation, the 3581
can be attached to iSeries, AS/400, pSeries, RS/6000, RS/6000 SP,
xSeries, Netfinity, Microsoft Windows 2000, Microsoft Windows 2003, Sun
Solaris, HP-UX, Linux, Netfinity, and other open systems using SCSI
attachment. The libraries use the IBM Ultrium 2 Tape Drives for faster
data transfer and reliability in automated library service. Each aspect
of the Ultrium Tape 2U Autoloader 3581 has been optimized for repeated,
reliable, unattended tape handling. IBM Ultrium tape cartridges have
been refined using the many years of IBM tape experience to provide a
tape cartridge that provides extremely fast data transfer, but stands up
to the rigors of automated handling.
Tape capacity is 200 GB per cartridge in native format, and using
(2:1) compression is 400 GB. The Ultrium 2 Tape Drives have sustained
data rates of 70 MB/sec. at 2:1 compression. The Ultrium Tape 2U
Autoloader 3581 capacity is eight tape cartridges, providing a media
capacity of up to 1.6 TB (3.2 TB with 2:1 compression) data storage per
unit.
The 3581 accommodates eight cartridges. Data rates depend on data
structure, operating system, system hardware, and the ability of the
application to maintain this throughput.
The Ultrium Tape 2U Autoloader 3581 attaches to a server using a SCSI
adapter. The library control unit contains the electronics and logic for
autochanger operations. Each IBM Ultrium tape drive contains the
electronics and logic for reading and writing data, control of the tape
drive, management of the data buffer, and error recovery procedures. The
3581 has its own power and cooling components.
3581 Models L28 and F28
- Width: Rack Mount 483 mm (19 in), Stand-alone 321 mm (16.6 in)
- Depth: Rack Mount 864 mm (34 in), Stand-alone 665 mm (26.2 in)
- Height: Rack Mount 89 mm (3.5 in), Stand-alone 86 mm (3.4 in)
- Maximum Weight: 5.7 kg (12.5 lbs) without Rack Mount
To assure installability and serviceability in non-IBM
industry-standard racks, review the installation planning information for
any product-specific installation requirements.
3581 Models L28 and F28
- Temperature: 12 to 35 degrees C, 54 to 95 degrees F
- Relative Humidity: 20% RH to 80% RH (non condensing)
- Wet Bulb: 26 degrees C (79.0 degrees F) maximum
- Voltage: 100-240 V ac, 50-60 Hz auto-ranging
- Electrical Power:
- 1.3 amps at 100 V ac, 0.7 amps at 240 V ac
- 0.1 KVA
- Maximum Noise Level in bels (operating/idle): 5.9/5.7
- Heat Output: 100 watts (86 KCal/Hr.)
Total HVD SCSI cable lengths are limited to 25 m (81 ft.) using
point-to-point (that is, one host connected to only one tape drive), or
multi-drop interconnection (that is, one host connected to more than one
tape drive on the same SCSI bus). Stub length at each device must not
exceed 0.2 m (0.66 ft).
Total LVD SCSI cable length is 12 m (39 ft) due to an internal
multi-drop interconnection. Stub length at each device must not exceed
0.1 m (0.33 ft).
Installing more than one 3581 drive on a SCSI bus may impact tape
drive or system performance. Intermixing of other SCSI devices on the
same SCSI bus as the 3581 may impact performance of those devices.
The IBM Ultrium Tape 2U Autoloader 3581 comes with raven black covers.
The Model L28 has an Ultra160 SCSI Low Voltage Differential (LVD)
interface (for HVD through feature number 3104). The Model F28 has a
Fibre Channel interface. The Ultrium Tape 2U Autoloader 3581 can be
attached to the iSeries, pSeries, xSeries, AS/400, RS/6000, RS/6000 SP
systems, Netfinity, and non-IBM servers, workstations, and personal
computers that support those interface specifications. A current list of
supported open system configurations is available from the following Web
site:
- http://www.ibm.com/storage/lto
- Select "LTO Support"
- Then the "Interoperability Matrix and Software ISVs"
- Then view the "Supported Servers and Operating Systems" for the
product
A power cord feature number, if applicable, should also be specified.
Cables
A SCSI or Fibre cable is required to attach the 3581 to the server
host bus adapter. At least one SCSI or Fibre cable should be specified
on the initial plant order. A terminator is included with each IBM
Ultrium Tape Drive. An interposer or interposers may be required for
attachment to various server adapters. Customers are responsible for
selecting and ordering the correct cables and interposers to match the
IBM LTO Ultrium SCSI interface and the server SCSI interface.
SCSI Cables
The following cables are available for SCSI LVD attachment of the
3581.
Cables with HD68 connectors on both ends:
- 5302 - 2.5 meters
- 5305 - 5 meters
- 5310 - 10 meters
- 5325 - 25 meters
- 9702 - 2.5 meters
Cables with a VHDCI connector on one end and an HD68 connector on the
other end:
- 5602 - 2.5 meters
- 5604 - 4.5 meters
- 5610 - 10 meters
- 5625 - 25 meters
- 9703 - 2.5 meters
An interposer is required to connect a SCSI cable with HD68 connectors
to a VHDCI connector. The following interposer is available:
- 5099 - VHDCI/HD68 Cable/Interposer
Fibre Channel Cables
A Fibre Channel cable is required to attach a Ultrium Tape 2U
Autoloader 3581 to host Fibre Channel adapters, Fibre Channel Switches,
or other Fibre Channel components. The IBM LTO Ultrium 2 Fibre Tape
Drive comes with an LC Duplex connector.
Features available for Fibre Channel cables, and their respective
lengths, are as follows:
- 5907 - 7 m SC-LC Fibre Channel Cable
- 5922 - 22 m SC-LC Fibre Channel Cable
- 5961 - 61 m SC-LC Fibre Channel Cable
- 6005 - 5 m LC-LC Fibre Channel Cable
- 6025 - 25 m LC-LC Fibre Channel Cable
- 6061 - 61 m LC-LC Fibre Channel Cable
A interposer may be required to connect a fibre cable with LC Duplex
connectors to another SC Duplex connector. The following interposer is
available:
- 5096 - Interposer SC-LC Fibre
Refer to the Special Features section of the Ultrium Tape
2U Autoloader 3581 Sales Manual for detailed descriptions of these
features.
The Ultrium Tape 2U Autoloader 3581 is supported on the following
operating systems at the minimum levels indicated:
- OS/400 V5R1, or later
- AIX V5.1, 5.2, or later
- Sun Solaris 7, 8, 9
- Microsoft Windows 2000 (build 2195, or later)
- Microsoft Windows 2003 (build 3790, or later)
- HP-UX 11.0 and HP-UX 11i (64-bit)
- Linux distributions:
- Red Hat Enterprise Linux 3
- United Linux 1.0, which includes the following distributions:
- SuSE Linux Enterprise Server 8 (SLES 8)
- Turbolinux Enterprise Server 8 (TLES 8)
- Connectiva Linux Enterprise Edition Powered by United Linux
For a current list of host software versions and release levels that
support the 3581, refer to the following Web site:
- http://www.ibm.com/storage/lto
- Select "LTO Support"
- Then the "Interoperability Matrix and Software ISVs"
- View the "Supported Servers and Operating Systems" for the product
Tivoli Storage Manager and other industry-leading compatible software
offerings can provide storage and tape management software for the 3581.
Supporting software and applications must be obtained separately from
IBM, IBM Business Partners, or independent software vendors (ISV). A
list of compatible software is available from your IBM representative or
at:
- http://www.ibm.com/storage/lto
- Select "LTO Support"
- Then the "Interoperability Matrix and Software ISVs"
- View the "Supported Storage Management Software" for the product
IBM continues to work together with the ISVs to support the Ultrium
Tape 2U Autoloader 3581. Individual application vendors should be
contacted for specific information and availability dates.
Back to top
Publications
|
The following publications are shipped with the product, as
appropriate. Additional copies are available. To order, contact your
IBM representative.
Order
Title Number
---------------------------------- ---------
IBM TotalStorage Ultrium Tape 2U
Autoloader 3581 Models L28 and F28
Setup, Operator and Service Guide GA32-0470
IBM TotalStorage Ultrium Tape 2U
Autoloader 3581 Models L28 and F28
Quick Reference GX35-5071
IBM Ultrium Device Driver
Installation and User's Guide GA32-0430
IBM Externally Attached Devices
Safety Information SA26-2004
The publications listed above and the following publications are also
available at the following Web site:
- http://www.ibm.com/storage/lto
Title
---------------------------------------------------------
IBM TotalStorage Ultrium Tape 2U Autoloader 3581
Models L28 and F28 SCSI Reference (English)
IBM Ultrium Device Driver Programming Reference (English)
Back to top
Features -- Specify/Special/Exchange
|
Description Type Model Number Feature
------------------------ ---------- ------- ------ -------
Attached to HP-UX System 3581 L28,F28 9210 Both
Attached to Sun System L28,F28 9211 Both
Attached to Windows System L28,F28 9212 Both
Attached to Other Non-IBM System L28,F28 9213 Both
Attached to Linux System L28,F28 9215 Both
Attached to zSeries Linux F28 9216 Both
Attach to iSeries or AS/400 L28,F28 9400 Both
Attach to pSeries or RS/6000 L28,F28 9600 Both
2.5 m HD68/HD68 SCSI Cable L28 9702 Plant
2.5 m VHDCI/HD68 SCSI Cable L28 9703 Plant
2.7 m Power Cord 125V, 15A, 9800 Plant
U.S./Canada
2.7 m Power Cord 250V, 16A (AC), L28,F28 9820 Plant
France, Germany, and others
2.7 m Power Cord 250V, 11A, Denmark L28,F28 9821 Plant
2.7 m Power Cord 250V, 13A, L28,F28 9825 Plant
United Kingdom,China, & others
2.7 m Power Cord 250V, 6-16A, L28,F28 9827 Plant
Israel
2.7 m Power Cord 255V, 10A, L28,F28 9828 Plant
Switzerland
2.7 m Power Cord 250V, 16A, South L28,F28 9829 Plant
Africa
2.7 m Power Cord 250V, 10 and 16A, L28,F28 9830 Plant
Italy
2.7 m Power Cord 250V, 10A, L28,F28 9831 Plant
Australia
2.7 m Power Cord 250V, 15A, L28,F28 9833 Plant
U.S./Canada
2.7 m Power Cord 250V, 10A, L28,F28 9834 Plant
Uruguay
2.7 m Power Cord 250V, 10A, L28,F28 9840 Plant
China (PRC)
Power Cord, 1.8 m, Chicago L28,F28 9986 Plant
System Attachment
The following specify codes indicate the type of server to which the
Ultrium Tape 2U Autoloader 3581 is attached.
(#9210) Attached to HP-UX
(#9211) Attached to Sun System
(#9212) Attached to Windows System
(#9213) Attached to Other Non-IBM System
(#9215) Attached to Linux System
(#9216) Attached to zSeries Linux (Model F28 only)
(#9400) Attach to iSeries or AS/400 System
(#9600) Attach to pSeries or RS/6000 System
The following attributes apply to the system attachment codes listed
above:
- Feature type: No Charge
- Required feature: No
- Maximum number of features: 99
- Initial order only: No
SCSI Cables
A SCSI cable is available as a no-charge specify feature with the
initial order. Additional SCSI cables are available as optional features
for attaching the Ultrium Tape 2U Autoloader 3581 to servers and other
adapters.
The following cables are used with an HVD Ultra SCSI bus or LVD
Ultra160 SCSI bus.
(#9702) 2.5 Meter HD68/HD68 SCSI Cable (Model L28 only)
(#9703) 2.5 Meter VHDCI/HD68 SCSI Cable (Model L28 only)
- Feature type: No charge
- Required feature: No
- Maximum number of features: One of either #9702 or #9703
- Installation: Plant Only
Power Cords
One of the following power cords must be selected:
(#9800) 2.7 m Power Cord, 125 V, 15 A, U.S./Canada
(#9820) 2.7 m Power Cord, 250 V, 16 A, France, Germany, & others
(#9821) 2.7 m Power Cord, 250 V, 11 A, Denmark
(#9825) 2.7 m Power Cord, 250 V, 13 A, United Kingdom, China, & others
(#9827) 2.7 m Power Cord, 250 V, 6-16 A, Israel
(#9828) 2.7 m Power Cord, 255 V, 10 A, Switzerland
(#9829) 2.7 m Power Cord, 250 V, 16 A, South Africa
(#9830) 2.7 m Power Cord, 250 V, 10 & 16 A, Italy
(#9831) 2.7 m Power Cord, 250 V, 10 A, Australia
(#9833) 2.7 m Power Cord, 250 V, 15 A, U.S./Canada
(#9834) 2.7 m Power Cord, 250 V, 10 A, Uruguay
(#9840) 2.7 m Power Cord 250 V, 10A, China (PRC)
(#9886) 1.8 m Power Cord, Chicago
The following attributes apply to the power cords listed above:
- Feature type: No Charge
- Required feature: The power cord shipped with the 3581 is determined
by the Country Code. Use the features above if a different power cord is
needed.
- Maximum number of features: One
- Initial order only: Yes
Plant/
Field
Only
Machine Feature Install
Description Type Model Number Feature
----------------------- ---------- -------- ---------- -------
RMU 3581 L28,F28 1660 Both
HVD Converter Kit L28 3104 Both
SC-LC Fibre Cable Interposer F28 5096 Both
VHDCI/HD68 Cable/Interposer L28 5099 Both
2.5 m HD68/HD68 SCSI Cable L28 5302 Both
5 m HD68/HD68 SCSI Cable L28 5305 Both
10 m HD68/HD68 SCSI Cable L28 5310 Both
25 m HD68/HD68 SCSI Cable L28 5325 Both
2.5 m VHDCI/HD68 SCSI Cable L28 5602 Both
4.5 m VHDCI/HD68 SCSI Cable L28 5604 Both
10 m VHDCI/HD68 SCSI Cable L28 5610 Both
25 m VHDCI/HD68 SCSI Cable L28 5625 Both
7 m LC/SC Fibre Channel Cable F28 5907 Both
22 m LC/SC Fibre Channel Cable F28 5922 Both
61 m LC/SC Fibre Channel Cable F28 5961 Both
5 m LC/LC Fibre Channel Cable F28 6005 Both
25 m LC/LC Fibre Channel Cable F28 6025 Both
61 m LC/LC Fibre Channel Cable F28 6061 Both
Rack Mount Kit L28,F28 7003 Both
Bar Code Reader L28,F28 7004 Both
1 Cleaning Cartridge L28,F28 8002 Plant
1-Pack Ultrium 2 Data Cart L28,F28 8101 Plant
(#1660) Remote Management Unit
This feature provides a web based browser interface through the Remote
Management Unit (RMU) Ethernet port for remote library management. The
RMU supports all operator panel functions including the ability to
download robotics and drive firmware, as well as upload error and event
log information.
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: One
- Installation: Plant or Field
(#3104) HVD Converter Kit
Converts LVD SCSI Drive to HVD SCSI Drive enabling connection to an
HBA adapter.
- Feature type: Chargeable
- Required feature: No. Only available on Model L28.
- Maximum number of features: One
- Installation: Plant or Field
Interposers
An interposer can be ordered for attachment to various servers and
adapters.
(#5096) LC-SC Fibre Cable Interposer
This inline terminator provides the required host termination to
connect a SCSI cable with an industry standard high-density 68-pin (HD68)
cable connector, to a HP F/W Differential SCSI 2 adapter (A4800A) on an
HP V-Class system.
- Feature type: Chargeable
- Required feature: No, available only on Model F28
- Maximum number of features: None
- Installation: Plant or Field
(#5099) VHDCI/HD68 Cable/Interposer
This feature provides a 16-bit SCSI cable used to convert from a
Mini-68 pin VHDCI connector to a 68 pin HD68 connector. This feature is
used to attach to the RS/6000 feature #6205, or any other SCSI adapter
using a VHDCI connector. The 0.3 meter cable has male Mini-68 pin VHDCI
connector on one end and a female 68-pin HD68 connector on the other.
This feature requires a SCSI cable to connect the device with the VHDCI
Cable/Interposer. Features #5302, #5305, or #5310 can be used.
To minimize cabling errors, it is recommended that server adapters
with VHDCI connectors use a cable such as features #5602, #5604, #5610,
and #5625 which eliminates the need for feature #5099.
- Feature type: Chargeable
- Required feature: No. Available only on Model L28.
- Maximum number of features: None
- Installation: Plant or Field
SCSI Cables
The following SCSI cables are available as optional features for
attaching the Ultrium Tape 2U Autoloader 3581 to servers and other
adapters. A SCSI differential terminator is included with each tape
drive.
The following cables are available for Ultra160 SCSI LVD or Ultra SCSI
HVD attachment.
Cables with HD68 connectors on both ends:
(#5302) 2.5 Meter HD68/HD68 SCSI Cable
(#5305) 5 Meter HD68/HD68 SCSI Cable
(#5310) 10 Meter HD68/HD68 SCSI Cable
(#5325) 25 Meter HD68/HD68 SCSI Cable
Cables with a VHDCI connector on one end and an HD68 connector on the
other end:
(#5602) 2.5 Meter VHDCI/HD68 SCSI Cable
(#5604) 4.5 Meter VHDCI/HD68 SCSI Cable
(#5610) 10 Meter VHDCI/HD68 SCSI Cable
(#5625) 25 Meter VHDCI/HD68 SCSI Cable
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: None
- Installation: Plant or Field
Fibre Channel Cables
Fibre Channel cables are available as optional features for attaching
the Ultrium Tape 2U Autoloader 3581 to servers and other adapters.
Each of the following 50 micron cables has an SC connector on one end
and a LC connector, as used on iSeries feature #2765 and pSeries feature
#6228, at the opposite end:
(#5907) 7 meter LC/SC Fibre Channel Cable
(#5922) 22 Meter LC/SC Fibre Channel Cable
(#5961) 61 Meter LC/SC Fibre Channel Cable
Each of the following 50 micron cables has an LC connector on both
ends:
(#6005) 5 Meter LC/LC Fibre Channel Cable
(#6025) 25 Meter LC/LC Fibre Channel Cable
(#6061) 61 Meter LC/LC Fibre Channel Cable
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: 99
- Installation: Plant or Field
(#7003) Rack Mount Kit
This feature provides the necessary hardware to mount the Ultrium Tape
2U Autoloader 3581 in a standard 19-inch EIA equipment rack. Two EIA
units are required.
- Feature Type: Chargeable
- Required feature: No
- Maximum number of features: One
- Installation: Plant or Field
(#7004) Bar Code Reader
This feature enables the Ultrium Tape 2U Autoloader 3581 to read
cartridge information contained in a bar code label on the IBM Ultrium
cartridges. User-installed application software provides the inventory
management functions enabled by the bar code reader feature.
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: One
- Installation: Plant or Field
Cartridge Features
The following are optional cartridge features for the Ultrium Tape 2U
Autoloader 3581. Features #8002 and #8101 can be ordered only with the
initial order.
One Ultrium Cleaning Cartridge and one Ultrium 200 GB Data Cartridge
are included with each order. Additional data and cleaner cartridges are
optional and need to be ordered, as needed. All media and cleaner
cartridges are warranted separately from the Ultrium Tape 2U Autoloader
3581.
(#8002) Ultrium Cleaning Cartridge
This feature provides one cleaning cartridge, used to clean the
Ultrium Tape Drives.
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: 5
- Initial order only: Yes
(#8101) One Ultrium 200GB Data Cartridge
This feature provides one 200GB data cartridge for use with Ultrium 2
Tape Drives.
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: 20
- Installation: Plant Only
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
For End Users:
The IBM TotalStorage LTO Ultrium 200 GB Data Cartridges and the IBM
TotalStorage LTO Cleaning Cartridge, for use in the Ultrium 2 Tape Drive,
can be purchased from IBM using feature numbers with the initial order.
IBM media can also be ordered directly through AAS using machine type
3589. Refer to the 3589 Sales Manual for further information.
The part numbers for additional supplies are:
IBM Part
Number Supply Item
--------- -------------------------------------------------------
08L9120 IBM TotalStorage LTO Ultrium Data Cartridge (100 GB)
08L9870 IBM TotalStorage LTO Ultrium 200 GB Data Cartridge
35L2086 IBM TotalStorage LTO Cleaning Cartridge (universal)
08L9129 Leader Pin Attachment Kit
08L9130 Manual Rewind Tool
For information about IBM branded media, such as additional IBM LTO
Ultrium data or cleaning cartridges, call 888-IBM-MEDIA (888-426-6334) in
the U.S. or Canada, or refer to the following Web site:
- http://www.storage.ibm.com/media
Diskettes
Not available.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|
|
|