The IBM 3580 Ultrium Tape Drive is an external, stand-alone,
SCSI-attached, Ultrium tape drive that attaches to AS/400, RS/6000,
Netfinity, and other Unix and PC servers supporting Microsoft Windows NT,
Microsoft Windows 2000, IBM AIX, Sun Solaris, HP-UX other open
workstations and servers. It provides a media capacity of up to 100 GB
(200 GB with 2:1 compression) data storage per cartridge and a sustained
data rate of up to 15 MB per second (uncompressed).
In addition to reading and writing on Ultrium tape data cartridges,
the 3580 Tape Drive provides an excellent migration path from DLT,
1/4-inch, 4mm, or 8mm tape drives. It is a very cost-effective solution
for save-and-restore and archiving functions and the first in a family of
IBM Ultrium tape solutions.
- Height: 14.6 cm (5.75 in)
- Width: 17.1 cm (6.74 in)
- Depth: 33.3 cm (13.1 in)
- Maximum Weight: 6.6 kg (14.3 lbs)
- Temperature: 10 to 38 degrees C (50 to 100 degrees F)
- Relative Humidity: 20 to 80 (percent)
- Wet Bulb: 26 degrees C (78.8 degrees F) maximum
- Voltage: 100-240 V AC, 50-60 Hz auto-ranging
- Electrical Power:
- 1.0 amps at 100 V AC, 0.5 amps at 240 V AC
- 0.120 KVA
- Maximum Noise Level: 55 dBa
- Heat Output: 94 watts (81 calories/hour)
Total LVD SCSI cable length is limited to 25 m (81 ft) using
point-to-point interconnection. Total LVD SCSI cable length is 12 m (39
ft) using multi-drop interconnection. Stub length at each device must
not exceed 0.1 m (0.33 ft).
Total HVD SCSI cable lengths are limited to 25 m (81 ft.) using
point-to-point (that is, one host connected to only one tape drive) or
multi-drop interconnection (that is, one host connected to more than one
tape drive on the same SCSI bus). Stub length at each device must not
exceed 0.2 m (0.66 ft).
Although the compression technology can increase the amount of data
stored on the media, the actual degree of compression achieved is highly
sensitive to the characteristics of the data being compressed.
For performance reasons, the AS/400 configurator limits the attachment
to one device per adapter (IOP/IOA). Installing more than one IBM LTO
Ultrium Tape Drive on an IOP/IOA may have an impact on tape performance.
Installing more than one Ultrium drive on a SCSI bus may impact system
performance. Intermixing of other SCSI devices on the same SCSI bus as
the 3580 Tape Drive may impact performance of those devices.
The 3580 Ultrium Tape Drive Model H11/H13 features an Ultra/Wide SCSI
High Voltage Differential (HVD) interface. The 3580 Ultrium Tape Drive
Model L11/L13 features an Ultra2/Wide SCSI Low Voltage Differential (LVD)
interface. The 3580 Ultrium Tape Drive can be attached to the IBM
AS/400, IBM RS/6000, IBM RS/6000 SP systems, Netfinity, and non-IBM
servers, workstations, and personal computers that support Ultra/Wide
SCSI HVD interface specifications and Ultra2/Wide SCSI LVD interface
specifications.
SCSI cables and appropriate interposers, as required, should be
ordered for attachment to a server.
A power cord feature number, if applicable, should also be specified.
The 3580 Ultrium Tape Drive has raven black covers.
AS/400
The 3580 Ultrium Tape Drive Model H11/H13 can be attached to models
that support Version 4 Release 4 (V4R4), or later, and the following
adapters:
- Feature 2729, PCI Magnetic Media Controller (HVD, HD68)
- Feature 2749, PCI Ultra Magnetic Media Controller (HVD, HD68)
(Requires Version 4 Release Release 5 (V4R5))
- Feature 6501, Magnetic Media Subsystem Controller (HVD)
- Feature 6534, Magnetic Media Controller (HVD, HD68)
pSeries, RS/6000, and RS/6000 SP
The 3580 Ultrium Tape Drive Models can be attached to models
supporting AIX 4.3.2, or later (depending on adapter type), and the
following adapters:
- Feature number 6204 (H11/H13) PCI Universal Differential Ultra SCSI
(HVD) (requires AIX 4.3.3, or later). This adapter is used in the
following pSeries and RS/6000 models:
- 7017-S80, pSeries 680 (7017-S85)
- pSeries 620 (7025-6F0), pSeries 620 (7025-6F1), 7025-F80
- pSeries 660 (7026-6H0), pSeries 660 (7026-6H1), pSeries 660
(7026-6M1), pSeries 640 (7026-B80), 7026-H70, 7026-H80, 7026-M80
- pSeries 610 (7028-6C1), pSeries 610 (7028-6E1)
- pSeries 690 (7040-681)
- 7043-270
- 7044-170, 7044-270
- 7046-B50
- Feature number 6203 (L11/L13), PCI Dual Channel Ultra3 SCSI Adapter
(LVD/SE with VHDCI connector). This adapter is used in the following
pSeries and RS/6000 models:
- 7017-S80
- pSeries 680 (7017-S85)
- pSeries 620 (7025-6F0), pSeries 620 (7025-6F1), 7025-F50, 7025-F80,
7025-H70
- pSeries 660 (7026-6H0), pSeries 660 (7026-6H1), pSeries 660
(7026-6M1), pSeries 640 (7026-B80), 7026-H70, 7026-H80, 7026-M80
- pSeries 610 (7028-6C1), pSeries 610 (7028-6E1)
- pSeries 690 (7040-681)
- 7043-150, 7043-270
- 7044-170, 7044-270
- 7046-B50
- Feature number 6207 (H11/H13) PCI Differential Ultra SCSI Adapter
(HVD). This adapter is used in the following RS/6000 models and requires
AIX 4.3.2, unless otherwise noted:
- 7013-S7A, 7013-S70
- 7015-S7A, 7015-S70
- 7017-S7A, 7017-S70
- 7017-S80 (AIX 4.3.3 or later)
- 7024-E20, 7024-E30
- 7025-F30, 7025-F40, 7025-F50
- 7025-F80 (AIX 4.3.3 or later)
- 7025-H70
- 7026-H10, 7026-H50, 7026-H70
- 7026-H80 (AIX 4.3.3 or later)
- 7043-140, 7043-150, 7043-240, 7043-260
- 7043-270 (AIX 4.3.3 or later)
- 7046-B50 (AIX 4.3.3 or later)
- 7317-F3L
- Feature number 6205 (L11/L13) PCI Dual Channel Ultra2 SCSI Adapter
(LVD/SE with VHDCI connector). This adapter is used in the following
pSeries and RS/6000 models:
- 7013-S7A
- 7015-S7A
- 7017-S7A, 7017-S80, pSeries (7017-S85)
- pSeries 620 (7026-6F0), pSeries 620 (7025-6F1), 7025-F40, 7025-F50,
7025-F80, 7025-H70
- pSeries 660 (7026-6H0), pSeries 660 (7026-6H1), pSeries 660
(7026-6M1), pSeries 640 (7026-B80), 7026-H50, 7026-H70, 7026-H80,
7026-M80
- 7043-150, 7043-260, 7043-270
- 7044-170, 7044-270
- 7046-B50
- (L11/L13) Integrated Ultra2 SCSI Adapter (LVD with VHDCI connector)
(requires AIX 4.3.3, or later). This adapter is used in the following
pSeries and RS/6000 models:
- pSeries 620 (7025-6F0), pSeries 620 (7025-6F1), 7025-F80
- pSeries 660 (7026-6H0), pSeries 660 (7025-6H1), pSeries 640
(7026-B80), 7026-H80, 7026-M80
- 7025-F80, 7026-H80, 7026-M80
- 7044-170, 7044-270
- (L11/L13) Integrated Ultra3 SCSI Adapter (LVD with VHDCI connector).
This adapter is used in the following pSeries and RS/6000 models:
- pSeries 610 (7028-6C1), pSeries 610 (7028-6E1)
Note: Optimal performance is obtained when the 3580 is the sole device
attached to the integrated SCSI adapter.
Netfinity Systems:
The 3580 Ultrium Tape Drive Models L11/L13 can be attached to
Netfinity systems supporting Microsoft Windows NT and Microsoft Windows
2000 operating systems and the following adapter:
- Netfinity #33L5000 Wide Ultra2 SCSI PCI Adapter (LVD)
Intel-Based Systems:
The 3580 Ultrium Tape Drive Model H11/H13
can be attached to systems supporting the Microsoft Windows NT and
Microsoft Windows 2000 operating systems and the following adapter:
- Adaptec AHA-2944UW PCI-to-Ultra Wide Differential SCSI Adapter (HVD)
The 3580 Ultrium Tape Drive Model L11/L13
can be attached to systems supporting the Microsoft Windows NT and
Microsoft Windows 2000 operating systems and the following adapters:
- Adaptec SCSI Card 29160 (LVD)
- Adaptec SCSI Card 39160 (LVD, VHDCI)
- Adaptec AHA-2940U2W Ultra2/Wide LVD SCSI adapter
- LSI Logic SYM22910 64-bit PCI-to-Ultra2/SCSI Dual Channel Host
Adapter (LVD, VHDCI)
Sun SPARC:
The 3580 Ultrium Tape Drive Model H11/H13 can be
attached to models supporting Sun Solaris 2.6, 7, and 8 with the
following adapters:
- X1065A, HVD, Ultra DWIS/S Host Adapter (VHDCI connector)
- X6541A, HVD Ultra SCSI Adapter (VHDCI connector)
Hewlett-Packard:
The 3580 Ultrium Tape Drive Model H11/H13 can be attached to A-, L-,
and N-Class systems supporting HP-UX 11.0 and the following adapters:
- A4800A, Ultra Wide HVD SCSI
The 3580 Ultrium Tape Drive Model L11/L13 can be attached to A-, L-,
and N-Class systems supporting HP-UX 11.0 and the following adapters:
- A5150A, Ultra2 LVD Dual-Port SCSI Adapter (VHDCI)
- A5149A, Ultra2 LVD Single-Port SCSI Adapter (VHDCI)
Other Systems:
The 3580 Ultrium Tape Drive may also be
compatible with other servers, operating systems, and SCSI adapters.
A current list of supported open system configuration and software
vendors is available from your IBM representative or at:
Cables:
A SCSI cable is required for each server
connection to a SCSI bus. If no cable is available, one should be
specified on the initial order for each library. A SCSI differential
terminator is included with each cable. An interposer may also be
required for attachment to various server adapters.
Features for specifying SCSI cables available for the 3580 Ultrium
Tape Drive, and their respective lengths, are:
The following cables are available for Ultra2 SCSI LVD or Ultra SCSI
HVD attachment.
Cables with HD68 connectors on both ends:
- 5301 - 0.4 meters (for drive-to-drive connection)
- 5302 - 2.5 meters
- 5305 - 5 meters
- 5310 - 10 meters
- 5318 - 18 meters
- 5325 - 25 meters
- 9702 - 2.5 meters
Cables with a VHDCI connector on one end and an HD68 connector on
the other end:
- 5602 - 2.5 meters
- 5604 - 4.5 meters
- 5610 - 10 meters
- 5620 - 20 meters
- 5625 - 25 meters
- 9703 - 2.5 meters
An interposer is required to connected a SCSI cable with HD/68
connectors to a VHDCI connector. The following interposer is available:
- 2895 - For AS/400 feature 6501
- 5099 - VHDCI/HD68 Cable/Interposer
Refer to the Special Features section of the Sales Manual
for detailed descriptions of these features.
The 3580 Ultrium Tape Drive is supported on the following operating
systems at the minimum levels indicated:
- OS/400 V4R4 or later
- AIX V4.3.2 or later
- Sun Solaris V2.6, Solaris V7, Solaris V8
- Microsoft Windows NT V4.0 with Service Pack 6
- Microsoft Windows 2000
- HP-UX 11.0
An update of the device drivers that supports these operating
systems is available on the following ftp site:
ftp.software.ibm.com/storage/devdrvr
Support for the Tape Drive 3580 is planned for the following products:
- Tivoli Storage Manager for AIX, Sun, Hewlett-Packard, Microsoft
Windows 2000, and Microsoft Windows NT supports the IBM 3580. Tivoli
Storage Manager offers highly automated, centrally-scheduled,
policy-managed backup and archive facilities to protect data in
distributed enterprises using AIX/6000, Sun, Hewlett-Packard, Microsoft
Windows NT, and Microsoft Windows 2000 systems as servers.
- Backup Recovery and Media Management for AS/400 (BRMS).
- Computer Associates ARCserveIT.
- Legato Systems NetWorker.
- Sterling Alexandria.
- SCH Technologies REELlibrarian and REELbackup.
- Veritas NetBackup and Backup Exec.
- Help/Systems.
IBM intends to work together with the ISV product manufacturers listed
above to support the 3580 Tape Drive. Individual application vendors
should be contacted for specific information and availability dates. The
list represents our best knowledge at the time of publication and does
not imply completeness.
Additional software support is available through library management
software products. The software to manage the 3580 Tape Drive is not
provided with the libraries. Supporting software and applications must
be obtained separately from IBM, IBM Business Partners, or ISVs. A list
of compatible software is available from your IBM representative or at:
- www.ibm.com/storage/lto
Back to top
Publications
|
The following publications are shipped with the product. Additional
copies are available. To order, contact your IBM representative:
Order
Title Number
----------------------------- ---------
IBM 3580 Ultrium
Tape Drive Setup,
Operator, and Service Guide GA32-0415
IBM 3580 Ultrium
Tape Drive Quick Reference GX35-5060
IBM Ultrium Device Driver GA32-0430
Installation and User's
Guide (English)
Translated Safety Notices for SA26-7197
External Storage Devices
The publications listed above are available at the following Web site:
- www.ibm.com/storage/lto
The following publications are also available at the above Web site:
Title
---------------------------------------------------------
3580 Ultrium Tape Drive SCSI Reference (English)
IBM Ultrium Device Driver Programming Reference (English)
Back to top
Features -- Specify/Special/Exchange
|
Plant/
Field
Only
Feature Install
Description Number Feature
--------------------------------------------- ------- -------
Attached to HP-UX System 9210 Both
Attached to Sun System 9211 Both
Attached to Windows System 9212 Both
Attached to Other non-IBM System 9213 Both
Attached to AS/400, iSeries System 9400 Both
Attached to RS/6000, pSeries System 9600 Both
2.5 m HD68/HD68 SCSI Cable 9702 Plant
2.5 m VHDCI/HD68 SCSI Cable 9703 Plant
2.7 M Power Cord 125V, 15A, U.S./Canada 9800 Plant
2.7 M Power Cord 250V, 16A (AC), France, 9820 Plant
Germany, & others
2.7 M Power Cord 250V, 11A, Denmark 9821 Plant
2.7 M Power Cord 250V, 13A, United Kingdom, 9825 Plant
China, & others
2.7 M Power Cord 250V, 6-16A, Israel 9827 Plant
2.7 M Power Cord 255V, 10A, Switzerland 9828 Plant
2.7 M Power Cord 250V, 16A, South Africa 9829 Plant
2.7 M Power Cord 250V, 10 and 16A, Italy 9830 Plant
2.7 M Power Cord 250V, 10A, Australia 9831 Plant
2.7 M Power Cord 250V, 15A, U.S./Canada 9833 Plant
2.7 M Power Cord 250V, 10A, Uruguay 9834 Plant
Power Cord, 1.8 M, Chicago 9986 Plant
SCSI Cables
An SCSI cable is available as a no-charge specify feature with the
initial order. Additional SCSI cables are available as optional features
for attaching the Ultrium 3580 Tape Drive to servers and other adapters.
A SCSI differential terminator is included with each cable ordered.
The following cables are used with an HVD Ultra SCSI bus or LVD Ultra2
SCSI bus.
(#9702) 2.5 Meter HD68/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#9703) 2.5 Meter VHDCI/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
- Feature type: No-charge
- Required feature: No
- Maximum number of features: One of either #9702 or #9703
- Installation: Plant Only
System Attachment
The following specify codes indicate the type of server to which the
IBM Ultrium 3580 Tape Drive is attached.
(#9210) Attached to HP-UX
(No Longer Available as of July 30, 2004)
(#9211) Attached to Sun System
(No Longer Available as of July 30, 2004)
(#9212) Attached to Windows System
(No Longer Available as of July 30, 2004)
(#9213) Attached to other non-IBM System
(No Longer Available as of July 30, 2004)
(#9400) Attached to AS/400 or iSeries System
(No Longer Available as of July 30, 2004)
(#9600) Attached to RS/6000 or pSeries System
(No Longer Available as of July 30, 2004)
The following attributes apply to the system attachment codes listed
above:
- Feature type: No Charge
- Required feature: No
- Maximum number of features: 99 (Note: Feature 9400 is not available
on the Models L11/L13).
- Initial order only: No
Power Cords
One of the following power cords must be selected:
(#9800) 2.7 m Power Cord, 125 V, 15 A, U.S./Canada
(No Longer Available as of July 30, 2004)
(#9820) 2.7 m Power Cord, 250 V, 16 A, France, Germany, & others
(No Longer Available as of July 30, 2004)
(#9821) 2.7 m Power Cord, 250 V, 11 A, Denmark
(No Longer Available as of July 30, 2004)
(#9825) 2.7 m Power Cord, 250 V, 13 A, United Kingdom, China & others
(No Longer Available as of July 30, 2004)
(#9827) 2.7 m Power Cord, 250 V, 6-16 A, Israel
(No Longer Available as of July 30, 2004)
(#9828) 2.7 m Power Cord, 255 V, 10 A, Switzerland
(No Longer Available as of July 30, 2004)
(#9829) 2.7 m Power Cord, 250 V, 16 A, South Africa
(No Longer Available as of July 30, 2004)
(#9830) 2.7 m Power Cord, 250 V, 10 & 16 A, Italy
(No Longer Available as of July 30, 2004)
(#9831) 2.7 m Power Cord, 250 V, 10 A, Australia
(No Longer Available as of July 30, 2004)
(#9833) 2.7 m Power Cord, 250 V, 15 A, U.S./Canada
(No Longer Available as of July 30, 2004)
(#9834) 2.7 m Power Cord, 250 V, 10 A, Uruguay
(No Longer Available as of July 30, 2004)
(#9986) 1.8 m Power Cord, Chicago
(No Longer Available as of July 30, 2004)
The following attributes apply to the power cords listed above:
- Feature type: No Charge
- Required feature: The power cord shipped with the 3580 is determined
by the Country Code. Use the features above if a different power cord is
needed.
- Maximum number of features: One
- Initial order only: Yes
Rack Power Cords
(#9860) Rack Power Cord, Single
(No Longer Available as of January 28, 2005)
(#9861) Rack Power Cord, Bifurcated
(No Longer Available as of January 28, 2005)
These features provide a rack power cord for use in IBM Black
19-inch racks to connect one (#9860) or two (#9861) storage devices.
These features are also available as optional features 5060 and 5061.
- Required feature: No
- Maximum: 1
- Plant or Field: Plant only
Plant/
Field
Only
Feature Install
Description Number Feature
-------------------------------------------- ------- -------
Interposer for AS/400 FC #6501 2895 Both
Rack Power Cord - Single 5060 Both
Rack Power Cord - Double 5061 Both
InLine HVD SCSI Terminator 5098 Both
VHDCI/HD68 Cable/Interposer 5099 Both
0.4 m HD68/HD68 SCSI Cable 5301 Both
2.5 m HD68/HD68 SCSI Cable 5302 Both
5 m HD68/HD68 SCSI Cable 5305 Both
10 m HD68/HD68 SCSI Cable 5310 Both
18 m HD68/HD68 SCSI Cable 5318 Both
25 m HD68/HD68 SCSI Cable 5325 Both
2.5 m VHDCI/HD68 SCSI Cable 5602 Both
4.5 m VHDCI/HD68 SCSI Cable 5604 Both
10 m VHDCI/HD68 SCSI Cable 5610 Both
20 m VHDCI/HD68 SCSI Cable 5620 Both
25 m VHDCI/HD68 SCSI Cable 5625 Both
1 Data Cartridge 8001 Plant
1 Cleaning Cartridge 8002 Plant
Rack Mount Kit 8723 Both
Rack Power Cords
(#5060) Rack Power Cord, Single
(No Longer Available as of January 28, 2005)
(#5061) Rack Power Cord, Bifurcated
(No Longer Available as of January 28, 2005)
These features provide a rack power cord for use in IBM Black
19-inch racks to connect one (#5060) or two (#5061) storage devices.
- Required feature: No
- Maximum: 3 total in any combination of 5060 or 5061
- Plant or Field: Yes
Interposers
A SCSI interposer can be ordered for attachment to various servers and
adapters.
(#2895) Interposer for AS/400 Feature #6501
(No Longer Available as of January 28, 2005)
This feature provides an interposer for connection of Models H11/H13
tape drive to an AS/400 Magnetic Media Subsystem Controller (feature
#6501).
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: None
- Installation: Plant or Field
(#5098) Inline HVD SCSI Terminator
(No Longer Available as of July 30, 2004)
This inline terminator provides the required host termination to
connect a SCSI cable with an industry standard
high-density 68-pin (HD68) cable connector, to a HP F/W Differential
SCSI 2 adapter (A4800A) on an HP V-Class system.
- Feature type: Chargeable
- Required feature: No, available only on the Model H11 or H13
- Maximum number of features: None
- Installation: Plant or Field
(#5099) VHDCI/HD68 Cable/Interposer
(No Longer Available as of July 30, 2004)
This feature provides a 16-bit SCSI cable used to convert from a
Mini-68 pin VHDCI connector to a 68 pin HD68 connector. This feature is
used to attach to the RS/6000 feature #6205, or any other SCSI adapter
using a VHDCI connector. The 0.3 meter cable has male Mini-68 pin VHDCI
connector on one end and a female 68-pin HD68 connector on the other.
This feature requires a SCSI cable to connect the device with the VHDCI
Cable/Interposer. Features #5301, #5302, #5305, or #5310 can be used.
To minimize cabling errors, it is recommended that server adapters
with VHDCI connectors use a cable such as features #5602, #5604, #5610,
#5620, and #5625 which eliminates the need for feature 5099.
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: None
- Installation: Plant or Field
SCSI Cables
The following Ultra2 SCSI cables are available as optional features
for attaching the Ultrium 3580 Tape Drive to servers and other adapters.
A SCSI differential terminator is included with each Ultrium drive.
The following cables are available for Ultra2 SCSI LVD or Ultra SCSI
HVD attachment.
Cables with HD68 connectors on both ends:
(#5301) 0.4 Meter HD68/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5302) 2.5 Meter HD68/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5305) 5 Meter HD68/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5310) 10 Meter HD68/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5318) 18 Meter HD68/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5325) 25 Meter HD68/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
Cables with a VHDCI connector on one end and an HD68 connector on the
other end:
(#5602) 2.5 Meter VHDCI/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5604) 4.5 Meter VHDCI/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5610) 10 Meter VHDCI/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5620) 20 Meter VHDCI/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
(#5625) 25 Meter VHDCI/HD68 SCSI Cable
(No Longer Available as of July 30, 2004)
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: None
- Installation: Plant or Field
Cartridge Features
The following are optional cartridge features for the IBM Ultrium 3580
Tape Drive. Features 8001 and 8002 be ordered only with the initial
order.
One Ultrium cleaning cartridge and one Ultrium data cartridge are
included with each library order. Additional data and cleaner cartridges
are optional and need to be ordered, as needed. All media and cleaner
cartridges are warranted separately from the Ultrium 3580 Tape Drive.
(#8001) One Ultrium Data Cartridge
(No Longer Available as of July 30, 2004)
This feature provides one unlabeled 100 MB data cartridge for use with
Ultrium tape drives. This feature is not available in Japan.
- Feature type: Chargeable
- Required feature: No.
- Maximum number of features: 5
- Installation: Plant Only
(#8002) Ultrium Cleaning Cartridge
(No Longer Available as of July 30, 2004)
This feature provides one cleaning cartridge, used to clean the
Ultrium tape drives. This feature is not available in Japan.
- Feature type: Chargeable
- Required feature: No
- Maximum number of features: 3
- Initial order only: Yes
Other Features
(#8723) Rack Mount Kit
This feature provides a metal plate and mounting hardware which can be
used to place selected I/O equipment with a 19-inch industry-standard
rack.
- Required feature: No
- Maximum: One
- Plant or Field: Yes
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
For End Users
The IBM Ultrium data and IBM Ultrium cleaning cartridges used in the
IBM 3580 Ultrium Tape Drive can be purchased from IBM using feature
numbers with the initial order. IBM media can also be ordered directly
through AAS using machine type 3589. Refer to the 3589 Sales Manual for
further information. The part numbers for additional supplies are:
IBM Part
Number Supply Item
-------- ---------------------------------------
08L9120 IBM LTO Ultrium Data Cartridge (100 GB)
08L9124 IBM LTO Ultrium Cleaning Cartridge
08L9129 Leader Pin Attachment Kit
08L9130 Manual Rewind Tool
35L1088 Magazine with cover
For additional media supplies refer to:
- http://www.storage.ibm.com/media
or contact the appropriate distributor for your location as given
below:
To purchase IBM-branded media and media supplies, call
1-888-IBM-MEDIA in the U.S. and Canada, or go to:
- http://www.storage.ibm.com/media
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2004.
Back to top
|
|
|
|
|
|