The MDS 9000 family introduces SAN capabilities including Cisco's
Virtual SAN (VSAN) technology, designed to enable efficient SAN
utilization by creating hardware-based isolated environments within a
single SAN fabric. Each VSAN can be zoned as a typical SAN and maintains
its own fabric services for added scalability and resilience.
Overall the MDS 9000 Family is designed for investment protection,
flexibility, scalability, robustness, advanced diagnostics, and
integration between low cost workgroup, and enterprise SANs.
Cisco's Virtual SAN (VSAN) Technology
The MDS 9000 SAN Fabric family introduces Cisco's Virtual SAN (VSAN)
technology, offering IT managers the capability to overlay multiple
hardware enforced virtual fabric environment, within a single physical
fabric infrastructure. Each VSAN contains separate (dedicated) fabric
services designed for enhanced scalability, resilience, and independence
among storage resource domains. This is especially useful in segregating
service operations and failover events between high availability resource
domains allocated to different VSANs. Each VSAN contains its own
complement of hardware-enforced zones, dedicated fabric services, and
management capabilities, just as if the VSAN were configured as a
separate physical fabric.
Therefore, VSANs are designed to allow more efficient SAN utilization
and flexibility, because SAN resources may be allocated and shared among
more users, while supporting secure segregation of traffic and retaining
independent control of resource domains on a VSAN-by-VSAN basis.
Fibre Channel SAN Capabilities
The following Fibre Channel SAN capabilities are integrated into the
base of all models within the MDS 9000 family, and are designed to
simplify deployment and efficient operation of large-scale fabric
installations.
- PortChannels allow users to aggregate up to sixteen physical Inter
Switch Links (ISL) into a single logical bundle, designed to optimize
bandwidth utilization and resilience between switches. The group of
Fibre Channel ISLs designated to act as a PortChannel may consist of any
port on any 16 Port Switching Module within the MDS 9000 chassis,
allowing the overall PortChannel to remain active upon failure of one or
more ports, or failure of one or more Switching Modules.
- Hardware enforced Fabric Zoning designated by N_Port WWN, N_Port
FC-ID, or Fx_Port WWN.
- Industry standard Fibre Channel ports, E_Port, F_Port, and FL_Port,
as well as Cisco specific modes of port operation
SAN Management Capabilities
The MDS 9000 SAN Fabric family provides three principal modes of
management: Cisco MDS 9000 family Command Line Interface (CLI), Cisco
Fabric Manager, and integration via API with third-party or end user
storage management tools.
Highlights for Cisco Coarse Wavelength-Division (2062-CW1)
The Cisco CWDM Extended Distance Solution (2062-CW1) is designed to
transmit multiple 1 / 2 Gbps Fibre Channel and/or Gigabit Ethernet
traffic streams over a single, shared fiber optic cable. The CWDM
solution consists of a two slot (1RU) CWDM Chassis, which accommodates up
to two passive optic CWDM Mux plug-in modules. Two types of modules are
available: an 8-wavelength multiplexer/demultiplexer module and a
4-wavelength multiplexer/demultiplexer module with add/drop capabilities.
The active CWDM wavelength-specific SFPs are installed into available
Fibre Channel and IP ports within one or more MDS Directors. Up to 8
CWDM wavelength-specific SFPs may be connected to the passive optic CWDM
Mux plug-in module, using the 1 meter or 5 meter single mode Lucent
Connector (LC)/Standard Connector (SC) fiber optic jumper cables (#5220
and #5221). Each wavelength specific SFP represents a color or channel,
and up to 8 channels are transmitted simultaneously between sites, over a
single, shared fiber optic cable, helping reduce the costs for Extended
Distance Solutions. Each site must include at least one CWDM Chassis. A
maximum of 16 wavelength-specific SFPs are supported in any one MDS
Director.
Highlights for Multilayer Fabric Switch (2062-D01)
The Cisco MDS 9216 Multilayer Fabric Switch (2062-D01) provides
sixteen one to two-Gbps auto-sensing Fibre Channel ports in the base
model, and accepts one optional switching module from the Cisco MDS 9000
family of switching modules, accommodating up to forty-eight one to
two-Gbps auto-sensing Fibre Channel ports.
The Cisco MDS 9216 (2062-D01) is a three-rack-unit fabric switch,
featuring hot swap capability for modular components: dual redundant
power supplies, fan assembly, single switching module, and optic
transceivers.
Selection of optional 16-Port or 32-Port Fibre Channel Switching Line
Cards are designed to provide support for 16 to 48 Fibre Channel ports
per MDS 9216 switch. Selection of optional 8-Port IP Services Line Cards
provides connection to Gigabit Ethernet networks and support for iSCSI
host initiators to access Fibre Channel storage. The optional FCIP
Activation feature allows the 8-Port IP Services Line Card to extend
native Fibre Channel Fabric over LAN and WAN infrastructure. Optional
switching modules are designed to be interchanged or shared between all
Cisco MDS 9000 Directors and Fabric Switches.
Fibre Channel ports on the Cisco MDS 9216 Fabric Switch (2062-D01) may
be configured to accept either Short Wave SFP or Long Wave SFP optic
transceivers; however, when ordering, all available Fibre Channel ports
must be populated with SFP optic transceivers. Fibre Channel line cards
are compatible with both Fibre Channel specific SFPs (#5230 and #5240)
and Tri-Rate SFPs (#5210 and #5220). A variety of lengths of optional
Fibre Channel multimode (50 um) fiber optic cables and couplers are
provided for connection convenience.
The 8-Port IP Services Line Card may be ordered with either Short Wave
SFP or Long Wave SFP optic transceivers; however, only one SFP is
required as a minimum configuration. The 8-Port IP Services Line Card is
compatible with Tri-Rate SFPs (#5210 and #5220) only.
Highlights for MDS 9506 Multilayer Director (2062-D04/T04)
The Cisco MDS 9506 Multilayer Director (2062-D04/T04) supports
director-class management, serviceability, and availability, including
hot-swap support and redundancy of active hardware components, as well as
non-disruptive software upgrades of active components. The Cisco MDS
9506 consists of a seven-rack-unit chassis with redundant power supplies,
and requires selection of two Supervisor modules with at least one
16-Port or 32-Port Fibre Channel Line Card. The Cisco MDS 9506 supports
up to a total of four Fibre Channel and IP Services Line Cards.
Each Supervisor Module internally is capable of providing the ability
to automatically restart failed processes. In the event that a
Supervisor Module is reset because of a hardware failure or service
action, synchronization between the active and standby Supervisor Modules
helps support stateful process failover while avoiding traffic
disruption.
Selection of optional 16-Port or 32-Port Fibre Channel Switching Line
Cards are designed to provide support for 16 to 128 Fibre Channel ports
per MDS 9506 chassis. Selection of optional 8-Port IP Services Line
Cards provides connection to Gigabit Ethernet networks and support for
iSCSI host initiators to access Fibre Channel storage. The optional FCIP
Activation feature allows the 8-Port IP Services Line Card to extend
native Fibre Channel Fabric over LAN and WAN infrastructure.
IBM offers two versions of the Cisco MDS 9506:
- IBM Model 2062-D04 includes AC power supplies in the base, suitable
for IT Data Centers
- IBM Model 2062-T04 includes DC power supplies in the base, suitable
for Telecom installations
Hot-swappable components include Supervisor Modules, optional line
card modules, Small Form-factor Pluggable (SFP) optics, power supplies,
and fan trays with integrated temperature and power management. Optional
line card modules are designed to be interchanged or shared between all
Cisco MDS 9000 Directors and Fabric Switches.
Fibre Channel ports on the Cisco MDS 9506 Director may be configured
to accept either Short Wave SFP or Long Wave SFP optic transceivers;
however, when ordering, all available Fibre Channel ports must be
populated with SFP optic transceivers. Fibre Channel line cards are
compatible with both Fibre Channel specific SFPs (#5230 and #5240) and
Tri-Rate SFPs (#5210 and #5220). A variety of lengths of optional Fibre
Channel multimode (50 um) fiber optic cables and couplers are provided
for connection convenience.
The 8-Port IP Services Line Card may be ordered with either Short Wave
SFP or Long Wave SFP optic transceivers; however, only one SFP is
required as a minimum configuration. The 8-Port IP Services Line Card is
compatible with Tri-Rate SFPs (#5210 and #5220) only.
Supervisor Modules on the Cisco MDS 9506 Director are designed to
accept an external 512 Mb Compact Flash (CF) Module to download or upload
software images, configuration files, or saving log files. This
capability is designed to facilitate service maintenance operations.
Highlights for MDS 9509 Multilayer Director (2062-D07/T07)
The Cisco MDS 9509 Multilayer Director (2062-D07/T07) highlights
director class management, serviceability, and availability, including
hot swap support and redundancy of active hardware components, and
non-disruptive software upgrade support on all active components. Each
Supervisor Module internally is capable of providing the ability to
automatically restart failed processes. In the event that a Supervisor
Module is reset because of hardware failure or service action, complete
synchronization between the active and standby Supervisor Modules support
stateful process failover with no traffic disruption.
The Cisco Multilayer Director MDS 9509 (2062-D07/T07) consists of a
fourteen-rack-unit chassis, which requires a minimum of one and supports
up to a maximum of seven optional switch modules, supporting 16 to 224
Fibre Channel ports per chassis.
Selection of optional 16-Port or 32-Port Fibre Channel Switching Line
Cards are designed to provide support for 16 to 224 Fibre Channel ports
per MDS 9509 chassis. Selection of optional 8-Port IP Services Line
Cards provides connection to Gigabit Ethernet networks and support for
iSCSI host initiators to access Fibre Channel storage. The optional FCIP
Activation feature allows the 8-Port IP Services Line Card to extend
native Fibre Channel Fabric over LAN and WAN infrastructure.
IBM offers two versions of the Cisco MDS 9509:
- IBM model 2062-D07 includes AC power supplies in the base, suitable
for IT Data Centers
- IBM model 2062-T07 includes DC power supplies in the base, suitable
for Telecom installations
The base configuration of both MDS 9509 models includes redundant
Supervisor Modules, redundant power supplies, and requires selection of
one optional switching module. Hot swappable components include
supervisor modules, optional switching modules, small form-factor
pluggable (SFP) optics, power supplies and fan trays with integrated
temperature and power management. Optional switching modules are
designed to be interchanged or shared between all Cisco MDS 9000
Directors and Fabric Switches.
Fibre Channel ports on the Cisco MDS 9509 Director may be configured
to accept either Short Wave SFP or Long Wave SFP optic transceivers;
however, when ordering, all available Fibre Channel ports must be
populated with SFP optic transceivers. Fibre Channel line cards are
compatible with both Fibre Channel specific SFPs (#5230 and #5240) and
Tri-Rate SFPs (#5210 and #5220). A variety of lengths of optional Fibre
Channel multimode (50 um) fiber optic cables and couplers are provided
for connection convenience.
The 8-Port IP Services Line Card may be ordered with either Short Wave
SFP or Long Wave SFP optic transceivers; however, only one SFP is
required as a minimum configuration. The 8-Port IP Services Line Card is
compatible with Tri-Rate SFPs (#5210 and #5220) only.
Optional Switching Modules
With Cisco MDS Switching Modules, network architects can allocate
bandwidth to meet specific application requirements while decreasing the
switching footprint which can help lower overall storage network
deployment cost. Optional switching modules are designed to be
interchanged or shared between all Cisco MDS 9000 Directors and Fabric
Switches.
16-Port 1 / 2-Gbps Fibre Channel Switching Module
The 16-Port Fibre Channel Switching Module option is designed to
deliver high performance for demanding storage networking applications.
Auto-sensing one to two-Gbps ports deliver up 64 Gbps of continuous
aggregate bandwidth, which provides up to 200 MB/s for each port, a
suitable solution for attachment of high performance servers and storage
subsystems as well as the recommended method for configuring ISL
connections between switches.
Up to sixteen 2-Gbps Inter Switch Links (ISLs) can be combined into a
single PortChannel. These ISLs may span any port on any 16 Port
Switching Module within a chassis for added scalability and resilience.
PortChannel is designed to provide up to 32 Gbps link throughput
performance.
Fibre Channel ports may be configured to accept either Short Wave SFP
or Long Wave SFP optic transceivers; however, when ordering, all
available ports must be populated with SFP optic transceivers.
32-Port 1 / 2-Gbps Fibre Channel Switching Module
The 32-Port Switching Module option is designed to deliver a balance
of performance and port density. This is a solution well-suited for low
cost attachment of lower performance servers and storage subsystems to
the high performance crossbar switch fabric without requiring ISLs.
Fibre Channel ports may be configured to accept either Short Wave SFP
or Long Wave SFP optic transceivers; however, when ordering, all
available ports must be populated with SFP optic transceivers.
8-Port IP Line Card for iSCSI and FCIP
The optional 8-Port IP Services Line Card provides connection to
Gigabit Ethernet networks and support for low cost iSCSI host initiators
to access Fibre Channel storage. The optional FCIP Activation features
allow the 8-Port IP Services Line Card to extend native Fibre Channel
Fabric over LAN and WAN infrastructure.
The 8-Port IP Services Line Card has been designed to enable the use
of iSCSI to extend the benefits of Fibre Channel SAN-based storage to
IP-enabled servers at a lower cost point and to a broader array of
workgroup platforms than supported with traditional SAN deployments. The
iSCSI capability helps increase storage utilization and availability
through consolidation of IP and Fibre Channel block storage, supporting
transparent storage administration practices such as zoning storage
resources.
The 8-Port IP Services Line Card may be ordered with either Short Wave
(SW) SFP or Long Wave (LW) SFP optic transceivers; however, only one SFP
is required as a minimum configuration. The 8-Port IP Services Line Card
is compatible with Tri-Rate SFPs only.
4-Port IPS Servcies Module
Summary: This feature provides a 4-Port IPS Servcies Module
(excluding optics) for connection to Gigabit Ethernet networks and
support for iSCSI and FCIP capabilities. FCIP Activation requires
ordering the FCIP Activation for 4 Port IPS Services Module, #2219 (D01)
or #2220 (D04/T04, D07/T07) for each 4 Port IPS Servcies Module.
Multiprotocol Services Module
The Multiprotocol Services Module
(excluding optics) for connection to Fibre Channel and Gigabit Ethernet
networks and support for iSCSI and FCIP capabilities. FCIP Activation
requires ordering the FCIP Activation for Multiprotocol Services
Module, #2215 (D01/T01), #2216 (D04/T04, D07/T07) for each
Multiprotocol Services Module.
The Multiprotocol Services Module IP ports are compatible
with the Tri-Rate SFP Transceivers (#5210 and #5220) and the CWDM
wavelength-specific SFPs (#5311-#5318).
The Multiprotocol Services Module Fibre Channel ports
are compatible with the Fibre Channel SFP (#5230 and #5240), Tri-Rate
SFP Transceivers (#5210 and #5220) and the CWDM wavelength-specific
SFPs (#5311-#5318).
FCIP Activation for Optional Modules
FCIP Activation is designed to help simplify data protection
and business continuance strategies by
enabling backup, remote replication, and disaster recovery over LAN and
WAN distances using open-standard FCIP tunneling. Specifically, FCIP
enables support for extended distance Fibre Channel fabric operation,
while supporting the Cisco MDS 9000 family of enhanced capabilities
including VSANs, advanced traffic management, and security across LAN and
WAN connections.
Additionally, FCIP improves utilization of WAN resources for backup
and replication, by tunneling up to 3 virtual Inter Switch Links (ISLs)
on a single Gigabit Ethernet port. Finally, FCIP can help reduce SAN
complexity by eliminating the need to deploy and manage a separate remote
connectivity platform.
Caching Services Modules
Cisco MDS 9000 Caching Services Modules (#2300/#2301) are designed to
provide advanced virtualization technology for use with IBM TotalStorage
SAN Volume Controller Storage Software for Cisco 9000 when used with
Cisco MDS 9216 (2062-D01), MDS 9506 (2062-D04/T04), and MDS 9509
(2062-D07/T07) Switches and Directors. Caching Services Modules support
scalable, in-band storage virtualization services within the network,
high-availability and network-hosted replication services. The
high-availability cluster solution design combines two MDS 9000 Caching
Services Modules, complete with redundant processors, 16 GB of mirrored
cache memory, and battery backup. This cluster delivers the functions
provided by the SAN Volume Controller Storage Software for Cisco MDS
9000.
SFP Transceivers
The Cisco Tri-Rate SFP can run in three modes of operation: 1 / 2
Gbps Fibre Channel as well as 1 Gbps Ethernet, supporting a single SFP
format across all MDS 9000 port types. The SW Tri-Rate SFP can be used
for distances up to 500 meters. The LW Tri-Rate SFP can be used for
distances up to 10 km.
Fibre Channel ports on the Cisco MDS 9216 Fabric Switch and MDS
Multilayer Directors may be configured to accept either SW SFP or LW SFP
optic transceivers; however, when ordering, all available Fibre Channel
ports must be populated with SFP optic transceivers. Fibre Channel line
cards are compatible with both Fibre Channel specific SFPs (#5230 and
#5240) and Tri-Rate SFPs (#5210 and #5220).
Multimode (50 um) Fibre Channel Fiber Optic Convenience
Cables
A variety of lengths of optional Fibre Channel multimode (50 um) fiber
optic cables and couplers are provided for connection convenience.
- 1 m Lucent Connector (LC)/LC Fiber Cable (multimode)(#5601)
- 5 m LC/LC Fiber Cable (multimode)(#5605)
- 25 m LC/LC Fiber Cable (multimode)(#5625)
These feature(s) supply multimode, 50.0 micron, Fibre Channel (1.0 m,
5.0 m, or 25.0 m) fiber optic cable with a male LC plug connection at
each end.
- Standard Connector (SC)/LC Coupling Cable (8 inch) (#5701)
- LC/SC Coupling Cable (2 meter) (#5702)
These feature(s) supply multimode, 50.0 micron, Fibre Channel (8 in
and 2 m) fiber optic coupler cables providing connection convenience
between LC and SC fiber optic cable assemblies.
Cisco Flash Memory Card
Supervisor Modules in the MDS 9500 series of Directors support the use
of an external 512 Mb CF module, for downloading / uploading software
images, configuration files, and saving large log files onto the portable
module. Key service maintenance operations include upgrading software
images on multiple MDS switches, saving configuration files, and saving
large log files. MDS 9500 security access control is applied in service
maintenance procedures using the CF module.
Additional Information
For the most current and complete description of Cisco Systems MDS
9000 family of storage networking products, please refer to the following
Web site:
http://www.cisco.com/go/ibm/storage
For a complete list of hardware and software requirements,
heterogeneous cross-functional product requirements, support statements,
prerequisites and/or product dependencies, please refer to the following
Web site:
http://www.ibm.com/storage/cisco
Back to top
Models
|
Model Summary Matrix
Models |
Number of Ports (Min/Max) |
Port Increments |
SW |
LW |
CW1 |
2 / 16 |
1 |
N |
Y |
D01 |
16 / 48 |
(FC = 16/32) (IP = 8) |
Y |
Y |
D04 |
16 / 128 |
(FC = 16/32) (IP = 8) |
Y |
Y |
T04 |
16 / 128 |
(FC = 16/32) (IP = 8) |
Y |
Y |
D07 |
16 / 224 |
(FC = 16/32) (IP = 8) |
Y |
Y |
T07 |
16 / 224 |
(FC = 16/32) (IP = 8) |
Y |
Y |
Customer Setup (CSU)
No, CE Install.
Devices Supported
For specific configuration support dates and other details on
availability, server models, operating system levels, and storage
attachment capabilities, please consult the following product Web site:
- http://www.ibm.com/storage/cisco
Model Conversions
None.
Back to top
Technical Description
|
2062-CW1
The Cisco Coarse Wavelength-Division (CWDM) (2062-CW1) consists of
wavelength specific SFP transceivers and passive optic multiplex /
demultiplex coupler units. The passive optic couplers combine up to
eight traffic streams, each on their respective wavelength, onto a shared
single mode fiber optic cable to reduce the cost of long distance
connection.
Cisco Systems MDS 9216 Fabric Switch
The 2062 Cisco Systems MDS 9216 (2062-D01) is a three-rack-unit fabric
switch with dual redundant power supplies, fan assembly, 16 or 32 port
switching module, the ability to be configured to accept either Short
Wave SFP or Long Wave SFP optic transceivers, 16 to 48 auto-sensing fibre
channel ports, and language support.
Cisco MDS 9506 Multilayer Director
The Cisco MDS 9506 (2062-D04) is a seven-rack-unit chassis with
redundant power supplies, and requires selection of two Supervisor
modules with at least one 16-Port or 32-Port Fibre Channel Line Card.
The Model D04 is a multiprotocol-capable storage area network Director
designed for the IT Data Center (with AC power supplies). The Model D04
supports up to a total of four Fibre Channel and/or IP Services Line
Cards. A minimum of one Fibre Channel port card is required.
Cisco MDS 9506 Multilayer Director (Telco)
The Cisco MDS 9506 (2062-T04) is a seven-rack-unit chassis with
redundant power supplies, and requires selection of two Supervisor
modules with at least one 16-Port or 32-Port Fibre Channel Line Card.
The Model T04 is a multiprotocol-capable storage area network Director
designed for telco environments (with DC power supplies). The Model D04
supports up to a total of four Fibre Channel and/or IP Services Line
Cards. A minimum of one Fibre Channel port card is required.
Cisco MDS 9509 Multilayer Director
The 2062 Cisco Systems MDS 9509 (2062-D07) is a fourteen-rack-unit
chassis, which requires a minimum of one and supports up to a maximum of
seven optional switch modules supporting 16 to 224 Fibre channel ports
per chassis, optional switching modules consisting of 16-Port fibre
channel switching modules, 32-port fibre channel switching modules, AC
power supplies in the base, and language support.
Cisco MDS 9509 Multilayer Director (Telco)
The 2062 Cisco Systems MDS 9509 (2062-T07) is a fourteen-rack-unit
chassis, which requires a minimum of one and supports up to a maximum of
seven optional switch modules supporting 16 to 224 Fibre channel ports
per chassis, optional switching modules consisting of 16-Port fibre
channel switching modules, 32-port fibre channel switching modules, DC
power supplies in the base, and language support.
For information on technical specifications of Cisco
products, including operating environment and physical specifications,
refer to the following Web site:
- http:// www.cisco.com/go/ibm/storage
The MDS 9509 Director is installable in an industry standard EIA Telco
rack, meeting requirements defined in the recommended installation
procedures. The Director is designed with side-to-side airflow, which is
commonly used in LAN switching environments, requiring sufficient space
between racks to provide adequate cooling. Up to three Directors may be
installed in a single 42U high rack, with up to 768 ports in a single
footprint.
For information on technical specifications of Cisco
products, including operating environment, recommended installation
procedures, and physical specifications, refer to the following Web site:
- http:// www.cisco.com/go/ibm/storage
Not applicable.
For a complete list of hardware requirements, cross product
requirements, prerequisites and/or product dependencies, refer to the
following Web site:
- http:// www.cisco.com/go/ibm/storage
For a complete list of software requirements, cross product
requirements, prerequisites and/or product dependencies, refer to the
following Web site:
- http:// www.cisco.com/go/ibm/storage
Back to top
Publications
|
Technical documentation for Cisco products is provided by
Cisco Systems.
Back to top
Features -- Specify/Special/Exchange
|
Field Plant
Inst. Inst.
Description Machine Model Feature Min Max Only Only
-------------------------- ------- ----- ------- --- --- ----- -----
Cisco MDS 9216 Fabric Switch 2062 D01
AC Power Cords, North America 9110 2 2 No Yes
AC Power Cords, Australia 9111 2 2 No Yes
AC Power Cords, Europe 9112 2 2 No Yes
AC Power Cords, Italy 9113 2 2 No Yes
AC Power Cords, United Kingdom 9114 2 2 No Yes
AC Power Cords, Argentina 9115 2 2 No Yes
AC Power Cord (South Africa) 9116 2 2 No Yes
AC Power Cord (Switzerland) 9117 2 2 No Yes
Cabinet Jumper Power Cord, 250 VAC 16 A, 9120 0 2 No Yes
C14-C15
Ship Grp Caching Services 9930 0 1 Yes No
Cisco MDS 9506 Multilayer 2062 D04
Director
Power Cord, 250 V ac 20A, Right Angle C19, 9221 2 2 No Yes
NEMA 6-20 Plug, U.S.
Power Cord, 250 V ac 20A, Right Angle C19, 9222 2 2 No Yes
NEMA L6-20 Plug, U.S.
Power Cord, 250 V ac 16A, Right Angle C19, 9223 2 2 No Yes
CEE 7/7 Plug, E.U.
Power Cord, 250 V ac 20A, Right Angle C19, 9224 2 2 No Yes
IEC 309 Plug, Intl
Power Cord, 250 V ac 16A, South Africa 9225 0 2 No Yes
Power Cord, 250 V ac 16A 23G Switzerland 9226 0 2 No Yes
Power Cord, 250 V ac 13A, United Kingdom 9227 0 2 No Yes
Cabinet Jumper Power Cord, 250 VAC 16 A, 9229 0 2 No Yes
C20-C19
Ship Grp Caching Services 9930 0 1 Yes No
Cisco MDS 9509 Multilayer 2062 D07
Director
Power Cords, U.S., 250Vac 16A NEMA 6-20 9210 2 2 No Yes
Power Cords, Europe, 16A 9211 2 2 No Yes
Power Cords, International, 250Vac 16A 9212 2 2 No Yes
Power Cords, U.S., 250Vac 16A Twist 9213 2 2 No Yes
NEMA L6-20
Power Cord, 250 V ac 16A, South Africa 9214 0 2 No Yes
Power Cord, 250 V ac 16A 23G Switzerland 9215 0 2 No Yes
Cabinet Jumper Power Cord, 250 VAC 16 A, 9229 0 2 No Yes
C20-C19
Ship Grp Caching Services 9930 0 1 Yes No
Cisco MDS 9506 Multilayer 2062 T04
Director
Ship Grp Caching Services 9930 0 1 Yes No
Cisco MDS 9509 Multilayer 2062 T07
Director
Ship Grp Caching Services 9930 0 1 Yes No
Power Cords for Cisco MDS 9216 Fabric Switch (IBM 2062-D01)
Summary: You must specify the type of power cord when ordering the
Cisco MDS 9216 (2062-D01) from IBM. Specify the required country
specific feature number (#9110-#9120) in your initial order (IPO).
(#9110) AC Power Cords, North America
(#9111) AC Power Cords, Australia
(#9112) AC Power Cords, Europe
(#9113) AC Power Cords, Italy
(#9114) AC Power Cords, United Kingdom
(#9115) AC Power Cords, Argentina
(#9116) AC Power Cord (South Africa)
(#9117) AC Power Cord (Switzerland)
The following applies to all power cords for the 2067-D01:
- Minimum Number of Features per 2062-D01: Two.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Min/Max quantities are for all power cords,
#9110 through #9117.
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, IPO only
- Cable Order: None.
(#9120) Cabinet Jumper Power Cord, 250 VAC 16 A, C14-C15 Connector
The following applies to all power cords for the 2062-D01:
- Minimum Number of Features per 2062-D01: Two.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Min/Max quantities are for all power cords,
#9110 through #9120.
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, IPO only
- Cable Order: None.
Power Cords for Cisco MDS 9506 Fabric Switch (IBM 2062-D04)
Summary: You must specify the type of power cord when ordering the
Cisco MDS 9506 (2062-D04) from IBM. Specify the required country
specific feature number (#9221-#9229) in your initial order (IPO).
(#9221) Power Cord, 250 V ac 20A, Rt Angle C19, NEMA 6-20 Plug, U.S.
(#9222) Power Cord, 250 V ac 20A, Rt Angle C19, NEMA L6-20 Plug, U.S.
(#9223) Power Cord, 250 V ac 16A, Rt Angle C19, CEE 7/7 Plug, E.U.
(#9224) Power Cord, 250 V ac 20A, Rt Angle C19, IEC 309 Plug, Intl
- Minimum Number of Features per 2062-D04: Two.
- Maximum Number of Features per 2062-D04: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, IPO only
- Cable Order: None.
(#9225) Power Cord, 250 V ac 16A, South Africa
(#9226) Power Cord, 250 V ac 16A 23G Switzerland
(#9227) Power Cord, 250 V ac 13A, United Kingdom
(#9229) Cabinet Jumper Power Cord, 250 VAC 16 A, C20-C19 Connector
The following applies to all power cords for the 2062-D04:
- Minimum Number of Features per 2062-D04: Two.
- Maximum Number of Features per 2062-D04: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Min/Max quantities are for all power cords,
#9221 through #9229.
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, IPO only
- Cable Order: None.
Power Cords for Cisco MDS 9509 Multilayer Director (IBM 2062-D07)
Summary: You must specify the type of power cord when ordering the
Cisco MDS 9509 (2062-D07) from IBM. Specify the required country
specific feature number (#9210-#9229) in your initial order (IPO).
(#9210) Power Cords, U.S., 250Vac 16A NEMA 6-20
(#9211) Power Cords, Europe, 16A
(#9212) Power Cords, International, 250Vac 16A
(#9213) Power Cords, U.S., 250Vac 16A Twist NEMA L6-20
- Minimum Number of Features per 2062-D07: Two.
- Maximum Number of Features per 2062-D07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, IPO only
- Cable Order: None.
(#9214) Power Cord, 250 V ac 16A, South Africa
(#9215) Power Cord, 250 V ac 16A 23G Switzerland
(#9229) Cabinet Jumper Power Cord, 250 VAC 16 A, C20-C19 Connector
The following applies to all power cords for the 2062-D07:
- Minimum Number of Features per 2062-D07: Two.
- Maximum Number of Features per 2062-D07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Min/Max quantities are for all power cords,
#9210 through #9229.
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, IPO only
- Cable Order: None.
Ship Group for Caching Services Module
(#9930) Ship Group for Caching Services Module
Summary: This feature is mandatory, you must specify it in your order
for the MDS 9000 Caching Services Module (#2300), along with the other
items required to complete the cluster, as described in feature #2300.
This feature provides the necessary user manuals and reference guides for
the Cisco MDS 9000 Caching Services Modules and IBM SAN Volume Controller
Storage Software for Cisco MDS 9000.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Two.
- Prerequisites: None.
- Corequisites: Required for each feature #2300 ordered.
- Compatibility Conflicts: None.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, MES only.
- Cable Order: None.
Field Plant
Inst. Inst.
Description Machine Model Feature Min Max Only Only
-------------------------- ------- ----- ------- --- --- ----- -----
Cisco CWDM Ext. Distance 2062 CW1
Solution
1470 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5311 0 2 N N
1490 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5312 0 2 N N
1510 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5313 0 2 N N
1530 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5314 0 2 N N
1550 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5315 0 2 N N
1570 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5316 0 2 N N
1590 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5317 0 2 N N
1610 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5318 0 2 N N
4 Wavelength Add/Drop Mux 5362 0 2 N N
8 Wavelength Mux/Demux 5364 0 2 N N
Fiber Optic Cable, Single mode, LC/SC, 1 M 5721 0 16 N N
Fiber Optic Cable, Single mode, LC/SC, 5 M 5722 0 16 N N
Cisco Post-Warr Supp 1 Yr IOR Base HW 8501 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Base HW 8502 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Base HW 8503 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Base HW 8504 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 4 MUX 8511 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 4 MUX 8512 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 4 MUX 8513 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 4 MUX 8514 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 8 MUX 8521 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 8 MUX 8522 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 8 MUX 8523 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 8 MUX 8524 0 1 N Y
Cisco MDS 9216 Fabric Switch 2062 D01
16 Port Fibre Channel Line Card 2116 0 1 N N
32 Port Fibre Channel Line Card 2132 0 1 N N
8-Port IP Line Card for iSCSI & FCIP 2208 0 1 N N
FCIP Activation - 8-Port IP Services Line Cd 2209 0 1 N N
Multiprotocol Services Module 2214 0 1 N N
FCIP Act for Multiprotocol Services Mod 2215 0 1 N N
4 Port IPS Services Module 2218 0 1 N N
FCIP Activation for 4 Port IPS Service Mod 2219 0 1 N N
Caching Services Module 2300 0 1 Y N
Addl, Caching Services Module 2301 0 1 Y N
Storage Services Module 2400 0 1 N N
Storage Services Enabler Package Bundle 2410 0 1 N N
Tri-Rate SW SFP Transceiver 5210 0 48 N N
Tri-Rate LW SFP Transceiver 5220 0 48 N N
FC Port SW SPF Transceiver 5230 0 48 N N
FC Port LW SPF Transceiver 5240 0 48 N N
1470 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5311 0 2 N N
1490 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5312 0 2 N N
1510 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5313 0 2 N N
1530 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5314 0 2 N N
1550 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5315 0 2 N N
1570 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5316 0 2 N N
1590 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5317 0 2 N N
1610 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5318 0 2 N N
1 m LC/LC Fiber Cable (multimode) 5601 0 48 N N
5 m LC/LC Fiber Cable (multimode) 5605 0 48 N N
25 m LC/LC Fiber Cable (multimode) 5625 0 48 N N
SC/LC Coupling Cable (8 inch) 5701 0 48 N N
LC/SC Coupling Cable (2 meter) 5702 0 48 N N
Cisco Post-Warr Supp 1 Yr IOR 16 Port 6011 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 16 Port 6012 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 16 Port 6013 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 16 Port 6014 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 32 Port 6021 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 32 Port 6022 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 32 Port 6023 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 32 Port 6024 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR IP Card 6101 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR IP Card 6102 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR IP Card 6103 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR IP Card 6104 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 14/2 MPS Mod 6105 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 14/2 MPS Mod 6106 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 14/2 MPS Mod 6107 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 14/2 MPS Mod 6108 0 1 N Y
Cisco Post-Warr Supp 1 Yr 4 Port IPS 6111 0 4 N N
Cisco Post-Warr Supp 2 Yr 4 Port IPS 6112 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Port IPS 6113 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Port IPS 6114 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Caching 6201 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Caching 6202 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Caching 6203 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Caching 6204 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR SSM 6211 0 1 N N
Cisco Post-Warr Supp 2 Yr IOR SSM 6212 0 1 N N
Cisco Post-Warr Supp 3 Yr IOR SSM 6213 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR SSM 6214 0 1 N Y
MDS 9000 Enterprise Package Bundle 7010 0 1 N N
MDS 9000 Enterprise Package 7011 0 1 N N
Cisco Post-Warr Supp 1 Yr Enterprise Pkg 7012 0 4 N N
MDS 9000 Fabric Manager Server Pac Bundle 7015 0 1 N N
MDS 9000 Fabric Manager Server Pkg 7016 0 1 N N
Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg 7017 0 4 N N
MDS 9000 Mainframe Package Bundle 7030 0 1 N N
MDS 9000 Mainframe Package 7031 0 1 N N
Cisco Post-Warr Supp 1 Yr Mainframe Pkg 7032 0 4 N N
Cisco Post-Warr Supp 2 Yr Enterprise Pkg 7113 0 2 N N
Cisco Post-Warr Supp 3 Yr Enterprise Pkg 7114 0 1 N Y
Cisco Post-Warr Supp 4 Yr Enterprise Pkg 7115 0 1 N Y
Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg 7118 0 2 N N
Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg 7119 0 1 N Y
Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg 7120 0 1 N Y
Cisco Post-Warr Supp 2 Yr Mainframe Pkg 7133 0 2 N N
Cisco Post-Warr Supp 3 Yr Mainframe Pkg 7134 0 1 N Y
Cisco Post-Warr Supp 4 Yr Mainframe Pkg 7135 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Base HW 8011 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Base HW 8012 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Base HW 8013 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Base HW 8014 0 1 N Y
Cisco MDS 9506 Multilayer 2062 D04
Director
Supervisor Line Card 2010 2 2 N Y
16-Port Fibre Channel Line Card 2116 0 4 N N
32-Port Fibre Channel Line Card 2132 0 4 N N
8-Port IP Line Card for iSCSI & FCIP 2208 0 3 N N
FCIP Activation - 8-Port IP Services Line Cd 2210 0 3 N N
Multiprotocol Services Module 2214 0 4 N N
FCIP Act for Multiprotocol Services Mod 2216 0 4 N N
4 Port IPS Services Module 2218 0 3 N N
FCIP Activation for 4 Port IPS Service Mod 2220 0 3 N N
Caching Services Module 2300 0 1 Y N
Addl, Caching Services Module 2301 0 1 Y N
Storage Services Module 2400 0 1 N N
Storage Services Enabler Package Bundle 2411 0 1 N N
Tri-Rate SW SFP Transceiver 5210 0 128 N N
Tri-Rate LW SFP Transceiver 5220 0 128 N N
FC Port SW SFP Transceiver 5230 0 128 N N
FC Port LW SFP Transceiver 5240 0 128 N N
1470 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5311 0 2 N N
1490 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5312 0 2 N N
1510 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5313 0 2 N N
1530 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5314 0 2 N N
1550 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5315 0 2 N N
1570 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5316 0 2 N N
1590 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5317 0 2 N N
1610 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5318 0 2 N N
1 m LC/LC Fiber Cable (multimode) 5601 0 128 N N
5 m LC/LC Fiber Cable (multimode) 5605 0 128 N N
25 m LC/LC Fiber Cable (multimode) 5625 0 128 N N
SC/LC Coupling Cable (8 inch) 5701 0 128 N N
LC/SC Coupling Cable (2 meter) 5702 0 128 N N
Cisco Flash Memory Card 5810 0 2 N Y
Cisco Spare Flash Memory Card 5811 0 255 Y N
Cisco Post-Warr Supp 1 Yr IOR Supervisor 6001 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Supervisor 6002 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Supervisor 6003 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Supervisor 6004 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 16 Port 6011 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 16 Port 6012 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 16 Port 6013 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 16 Port 6014 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 32 Port 6021 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 32 Port 6022 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 32 Port 6023 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 32 Port 6024 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR IP Card 6101 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR IP Card 6102 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR IP Card 6103 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR IP Card 6104 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 14/2 MPS Mod 6105 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 14/2 MPS Mod 6106 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 14/2 MPS Mod 6107 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 14/2 MPS Mod 6108 0 1 N Y
Cisco Post-Warr Supp 1 Yr 4 Port IPS 6111 0 4 N N
Cisco Post-Warr Supp 2 Yr 4 Port IPS 6112 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 4 Port IPS 6113 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 4 Port IPS 6114 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Caching 6201 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Caching 6202 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Caching 6203 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Caching 6204 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR SSM 6211 0 1 N N
Cisco Post-Warr Supp 2 Yr IOR SSM 6212 0 1 N N
Cisco Post-Warr Supp 3 Yr IOR SSM 6213 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR SSM 6214 0 1 N Y
MDS 9000 Enterprise Package Bundle 7020 0 1 N N
MDS 9000 Enterprise Package 7021 0 1 N N
Cisco Post-Warr Supp 1 Yr Enterprise Pkg 7022 0 4 N N
MDS 9000 Fabric Manager Server Pack Bundle 7025 0 1 N N
MDS 9000 Fabric Manager Server Pkg 7026 0 1 N N
Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg 7027 0 4 N N
MDS 9500 Mainframe Package Bundle 7035 0 1 N N
MDS 9000 Mainframe Package 7036 0 1 N N
Cisco Post-Warr Supp 1 Yr Mainframe Pkg 7037 0 4 N N
Cisco Post-Warr Supp 2 Yr Enterprise Pkg 7123 0 2 N N
Cisco Post-Warr Supp 3 Yr Enterprise Pkg 7124 0 1 N Y
Cisco Post-Warr Supp 4 Yr Enterprise Pkg 7125 0 1 N Y
Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg 7128 0 2 N N
Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg 7129 0 1 N Y
Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg 7130 0 1 N Y
Cisco Post-Warr Supp 2 Yr Mainframe Pkg 7138 0 2 N N
Cisco Post-Warr Supp 3 Yr Mainframe Pkg 7139 0 1 N Y
Cisco Post-Warr Supp 4 Yr Mainframe Pkg 7140 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Base HW 8111 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Base HW 8112 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Base HW 8113 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Base HW 8114 0 1 N Y
Cisco MDS 9506 Multilayer 2062 T04
Director
Supervisor Line Card 2010 2 2 N Y
16-Port Fibre Channel Line Card 2116 0 4 N N
32-Port Fibre Channel Line Card 2132 0 4 N N
8-Port IP Line Card for iSCSI & FCIP 2208 0 3 N N
FCIP Activation - 8-Port IP Services Line Cd 2210 0 3 N N
Multiprotocol Services Module 2214 0 4 N N
FCIP Act for Multiprotocol Services Mod 2216 0 4 N N
4 Port IPS Services Module 2218 0 3 N N
FCIP Activation for 4 Port IPS Service Mod 2220 0 3 N N
Caching Services Module 2300 0 1 Y N
Addl, Caching Services Module 2301 0 1 Y N
Storage Services Module 2400 0 1 N N
Storage Services Enabler Package Bundle 2411 0 1 N N
Tri-Rate SW SFP Transceiver 5210 0 128 N N
Tri-Rate LW SFP Transceiver 5220 0 128 N N
FC Port SW SFP Transceiver 5230 0 128 N N
FC Port LW SFP Transceiver 5240 0 128 N N
1470 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5311 0 2 N N
1490 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5312 0 2 N N
1510 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5313 0 2 N N
1530 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5314 0 2 N N
1550 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5315 0 2 N N
1570 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5316 0 2 N N
1590 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5317 0 2 N N
1610 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5318 0 2 N N
1 m LC/LC Fiber Cable (multimode) 5601 0 128 N N
5 m LC/LC Fiber Cable (multimode) 5605 0 128 N N
25 m LC/LC Fiber Cable (multimode) 5625 0 128 N N
SC/LC Coupling Cable (8 inch) 5701 0 128 N N
LC/SC Coupling Cable (2 meter) 5702 0 128 N N
Cisco Flash Memory Card 5810 0 2 N Y
Cisco Spare Flash Memory Card 5811 0 255 Y N
Cisco Post-Warr Supp 1 Yr IOR Supervisor 6001 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Supervisor 6002 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Supervisor 6003 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Supervisor 6004 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 16 Port 6011 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 16 Port 6012 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 16 Port 6013 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 16 Port 6014 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 32 Port 6021 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 32 Port 6022 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 32 Port 6023 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 32 Port 6024 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR IP Card 6101 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR IP Card 6102 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR IP Card 6103 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR IP Card 6104 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 14/2 MPS Mod 6105 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 14/2 MPS Mod 6106 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 14/2 MPS Mod 6107 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 14/2 MPS Mod 6108 0 1 N Y
Cisco Post-Warr Supp 1 Yr 4 Port IPS 6111 0 4 N N
Cisco Post-Warr Supp 2 Yr 4 Port IPS 6112 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 4 Port IPS 6113 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 4 Port IPS 6114 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Caching 6201 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Caching 6202 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Caching 6203 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Caching 6204 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR SSM 6211 0 1 N N
Cisco Post-Warr Supp 2 Yr IOR SSM 6212 0 1 N N
Cisco Post-Warr Supp 3 Yr IOR SSM 6213 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR SSM 6214 0 1 N Y
MDS 9000 Enterprise Package Bundle 7020 0 1 N N
MDS 9000 Enterprise Package 7021 0 1 N N
Cisco Post-Warr Supp 1 Yr Enterprise Pkg 7022 0 4 N N
MDS 9000 Fabric Manager Server Pack Bundle 7025 0 1 N N
MDS 9000 Fabric Manager Server Pkg 7026 0 1 N N
Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg 7027 0 4 N N
MDS 9500 Mainframe Package Bundle 7035 0 1 N N
MDS 9000 Mainframe Package 7036 0 1 N N
Cisco Post-Warr Supp 1 Yr Mainframe Pkg 7037 0 4 N N
Cisco Post-Warr Supp 2 Yr Enterprise Pkg 7123 0 2 N N
Cisco Post-Warr Supp 3 Yr Enterprise Pkg 7124 0 1 N Y
Cisco Post-Warr Supp 4 Yr Enterprise Pkg 7125 0 1 N Y
Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg 7128 0 2 N N
Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg 7129 0 1 N Y
Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg 7130 0 1 N Y
Cisco Post-Warr Supp 2 Yr Mainframe Pkg 7138 0 2 N N
Cisco Post-Warr Supp 3 Yr Mainframe Pkg 7139 0 1 N Y
Cisco Post-Warr Supp 4 Yr Mainframe Pkg 7140 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Base HW 8211 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Base HW 8212 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Base HW 8213 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Base HW 8214 0 1 N Y
Cisco MDS 9509 Multilayer 2062 D07
Director
16-Port Fibre Channel Line Card 2116 0 7 N N
32-Port Fibre Channel Line Card 2132 0 7 N N
8-Port IP Line Card for iSCSI & FCIP 2208 0 5 N N
FCIP Activation - 8-Port IP Services Line Cd 2210 0 5 N N
Multiprotocol Services Module 2214 0 7 N N
FCIP Act for Multiprotocol Services Mod 2216 0 7 N N
4 Port IPS Services Module 2218 0 5 N N
FCIP Activation for 4 Port IPS Service Mod 2220 0 5 N N
Caching Services Module 2300 0 2 Y N
Addl, Caching Services Module 2301 0 2 Y N
Storage Services Module 2400 0 1 N N
Storage Services Enabler Package Bundle 2411 0 1 N N
Tri-Rate SW SFP Transceiver 5210 0 128 N N
Tri-Rate LW SFP Transceiver 5220 0 128 N N
FC Port SW SFP Transceiver 5230 0 128 N N
FC Port LW SFP Transceiver 5240 0 128 N N
1470 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5311 0 2 N N
1490 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5312 0 2 N N
1510 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5313 0 2 N N
1530 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5314 0 2 N N
1550 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5315 0 2 N N
1570 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5316 0 2 N N
1590 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5317 0 2 N N
1610 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5318 0 2 N N
1 m LC/LC Fiber Cable (multimode) 5601 0 128 N N
5 m LC/LC Fiber Cable (multimode) 5605 0 128 N N
25 m LC/LC Fiber Cable (multimode) 5625 0 128 N N
SC/LC Coupling Cable (8 inch) 5701 0 128 N N
LC/SC Coupling Cable (2 meter) 5702 0 128 N N
Cisco Flash Memory Card 5810 0 2 N Y
Cisco Spare Flash Memory Card 5811 0 255 Y N
Cisco Post-Warr Supp 1 Yr IOR 16 Port 6011 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 16 Port 6012 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 16 Port 6013 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 16 Port 6014 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 32 Port 6021 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 32 Port 6022 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 32 Port 6023 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 32 Port 6024 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR IP Card 6101 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR IP Card 6102 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR IP Card 6103 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR IP Card 6104 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 14/2 MPS Mod 6105 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 14/2 MPS Mod 6106 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 14/2 MPS Mod 6107 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 14/2 MPS Mod 6108 0 1 N Y
Cisco Post-Warr Supp 1 Yr 4 Port IPS 6111 0 4 N N
Cisco Post-Warr Supp 2 Yr 4 Port IPS 6112 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 4 Port IPS 6113 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 4 Port IPS 6114 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Caching 6201 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Caching 6202 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Caching 6203 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Caching 6204 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR SSM 6211 0 1 N N
Cisco Post-Warr Supp 2 Yr IOR SSM 6212 0 1 N N
Cisco Post-Warr Supp 3 Yr IOR SSM 6213 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR SSM 6214 0 1 N Y
MDS 9000 Enterprise Package Bundle 7020 0 1 N N
MDS 9000 Enterprise Package 7021 0 1 N N
Cisco Post-Warr Supp 1 Yr Enterprise Pkg 7022 0 4 N N
MDS 9000 Fabric Manager Server Pack Bundle 7025 0 1 N N
MDS 9000 Fabric Manager Server Pkg 7026 0 1 N N
Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg 7027 0 4 N N
MDS 9500 Mainframe Package Bundle 7035 0 1 N N
MDS 9000 Mainframe Package 7036 0 1 N N
Cisco Post-Warr Supp 1 Yr Mainframe Pkg 7037 0 4 N N
Cisco Post-Warr Supp 2 Yr Enterprise Pkg 7123 0 2 N N
Cisco Post-Warr Supp 3 Yr Enterprise Pkg 7124 0 1 N Y
Cisco Post-Warr Supp 4 Yr Enterprise Pkg 7125 0 1 N Y
Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg 7128 0 2 N N
Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg 7129 0 1 N Y
Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg 7130 0 1 N Y
Cisco Post-Warr Supp 2 Yr Mainframe Pkg 7138 0 2 N N
Cisco Post-Warr Supp 3 Yr Mainframe Pkg 7139 0 1 N Y
Cisco Post-Warr Supp 4 Yr Mainframe Pkg 7140 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Base HW 8311 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Base HW 8312 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Base HW 8313 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Base HW 8314 0 1 N Y
Cisco MDS 9509 Multilayer 2062 T07
Director
16-Port Fibre Channel Line Card 2116 0 7 N N
32-Port Fibre Channel Line Card 2132 0 7 N N
8-Port IP Line Card for iSCSI & FCIP 2208 0 5 N N
FCIP Activation - 8-Port IP Services Line Cd 2210 0 5 N N
Multiprotocol Services Module 2214 0 7 N N
FCIP Act for Multiprotocol Services Mod 2216 0 7 N N
4 Port IPS Services Module 2218 0 5 N N
FCIP Activation for 4 Port IPS Service Mod 2220 0 5 N N
Caching Services Module 2300 0 2 Y N
Addl, Caching Services Module 2301 0 2 Y N
Storage Services Module 2400 0 1 N N
Storage Services Enabler Package Bundle 2411 0 1 N N
Tri-Rate SW SFP Transceiver 5210 0 128 N N
Tri-Rate LW SFP Transceiver 5220 0 128 N N
FC Port SW SFP Transceiver 5230 0 128 N N
FC Port LW SFP Transceiver 5240 0 128 N N
1470 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5311 0 2 N N
1490 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5312 0 2 N N
1510 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5313 0 2 N N
1530 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5314 0 2 N N
1550 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5315 0 2 N N
1570 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5316 0 2 N N
1590 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5317 0 2 N N
1610 NM CWDM Gigabit Ether - 1-2 Gbps FC SFP 5318 0 2 N N
1 m LC/LC Fiber Cable (multimode) 5601 0 128 N N
5 m LC/LC Fiber Cable (multimode) 5605 0 128 N N
25 m LC/LC Fiber Cable (multimode) 5625 0 128 N N
SC/LC Coupling Cable (8 inch) 5701 0 128 N N
LC/SC Coupling Cable (2 meter) 5702 0 128 N N
Cisco Flash Memory Card 5810 0 2 N Y
Cisco Spare Flash Memory Card 5811 0 255 Y N
Cisco Post-Warr Supp 1 Yr IOR 16 Port 6011 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 16 Port 6012 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 16 Port 6013 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 16 Port 6014 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 32 Port 6021 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 32 Port 6022 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 32 Port 6023 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 32 Port 6024 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR IP Card 6101 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR IP Card 6102 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR IP Card 6103 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR IP Card 6104 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR 14/2 MPS Mod 6105 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR 14/2 MPS Mod 6106 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 14/2 MPS Mod 6107 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 14/2 MPS Mod 6108 0 1 N Y
Cisco Post-Warr Supp 1 Yr 4 Port IPS 6111 0 4 N N
Cisco Post-Warr Supp 2 Yr 4 Port IPS 6112 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR 4 Port IPS 6113 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR 4 Port IPS 6114 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Caching 6201 0 4 N N
Cisco Post-Warr Supp 2 Yr IOR Caching 6202 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Caching 6203 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Caching 6204 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR SSM 6211 0 1 N N
Cisco Post-Warr Supp 2 Yr IOR SSM 6212 0 1 N N
Cisco Post-Warr Supp 3 Yr IOR SSM 6213 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR SSM 6214 0 1 N Y
MDS 9000 Enterprise Package Bundle 7020 0 1 N N
MDS 9000 Enterprise Package 7021 0 1 N N
Cisco Post-Warr Supp 1 Yr Enterprise Pkg 7022 0 4 N N
MDS 9000 Fabric Manager Server Pack Bundle 7025 0 1 N N
MDS 9000 Fabric Manager Server Pkg 7026 0 1 N N
Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg 7027 0 4 N N
MDS 9500 Mainframe Package Bundle 7035 0 1 N N
MDS 9000 Mainframe Package 7036 0 1 N N
Cisco Post-Warr Supp 1 Yr Mainframe Pkg 7037 0 4 N N
Cisco Post-Warr Supp 2 Yr Enterprise Pkg 7123 0 2 N N
Cisco Post-Warr Supp 3 Yr Enterprise Pkg 7124 0 1 N Y
Cisco Post-Warr Supp 4 Yr Enterprise Pkg 7125 0 1 N Y
Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg 7128 0 2 N N
Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg 7129 0 1 N Y
Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg 7130 0 1 N Y
Cisco Post-Warr Supp 2 Yr Mainframe Pkg 7138 0 2 N N
Cisco Post-Warr Supp 3 Yr Mainframe Pkg 7139 0 1 N Y
Cisco Post-Warr Supp 4 Yr Mainframe Pkg 7140 0 1 N Y
Cisco Post-Warr Supp 1 Yr IOR Base HW 8311 0 4 N N
Cisco Post Warr Supp 1 Yr IOR Base HW 8411 0 4 N N
Cisco Post Warr Supp 2 Yr IOR Base HW 8412 0 2 N N
Cisco Post-Warr Supp 3 Yr IOR Base HW 8413 0 1 N Y
Cisco Post-Warr Supp 4 Yr IOR Base HW 8414 0 1 N Y
Intelligent Storage Service Features
(#2400) Cisco MDS 9000 Storage Services Module
Summary: This feature provides a Storage Services Module providing
32 port Fibre Channel Switching Module and intelligent storage
services in addition to 1 and 2 Gbps Fibre Channel switching.
The Storage Services Module Fibre Channel ports are compatible with
the Fibre Channel SFP (#5230 and #5240), Tri-Rate SFP Transceivers
(#5210 and #5220) and the CWDM wavelength-specific SFPs (#5311-#5318).
- Minimum Number of Features per 2062-D01/T01: None.
- Maximum Number of Features per 2062-D01/T01: One.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Four.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Seven.
- Prerequisites: None.
- Corequisites: All FC Ports must be populated with FC SFP
Tranceivers (#5210-#5240, or #5311-#5318).
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2410) Storage Services Enabler Package Bundle
Summary: This feature provides three different interfaces for
Independent Software Vendors (ISVs) to develop intelligent fabric
applications including:
- Network-accelerated serverless backup applications use the Serverless
Backup Engine Interface to enable disk systems write directly to tape
systems without requiring backup server reads and writes.
- Network-assisted appliance-based storage applications use the SANTap
Service Inteface to directly replicate data to remote sites without
requiring application server agents.
- Network-hosted storage applications use the Intelligent Storage
Service Application Programmatic Interface for "out-of-band" storage
management.
IBM support for these ISV applications is limited to IBM TotalStorage
Proven Networking Solutions. For the most current IBM TotalStorage
Proven application information, visit:
http://www.ibm.com/storage/proven
The Storage Services Enabler Package Bundle is structured
to include the first-year warranty plus two additional years of
post-warranty support for the bundle. Upon selection of the SSE Package
Bundle, customers will be required to purchase
(or already have entitlement to) two additional years of post-warranty
support on the MDS 9000 base hardware.
- Minimum Number of Features per 2062-D01/T01: None.
- Maximum Number of Features per 2062-D01/T01: One.
- Prerequisites: None.
- Corequisites: Feature #2400.
- Corequisites: Must have two additional years of post-warranty support
on the MDS 9000 base hardware (either two of #8011 or one of #8012).
- Compatibility Conflicts: For SSM Activation, this feature is
required for each #2400 ordered.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2411) Storage Services Enabler Package Bundle
Summary: This feature provides three different Independent Software
Vendors (ISVs) interfaces required to develop intelligent fabric
applications:
- Network-accelerated serverless backup applications use the Serverless
Backup Engine Interface to enable disk systems write directly to tape
systems without requiring backup server reads and writes.
- Network-assisted appliance-based storage applications use the SANTap
Service Inteface to directly replicate data to remote sites without
requiring application server agents.
- Network-hosted storage applications use the Intelligent Storage
Service Application Programmatic Interface for "out-of-band" storage
management.
IBM support for these ISV applications is limited to IBM TotalStorage
Proven Networking Solutions. For the most current IBM TotalStorage
Proven application information, visit:
http://www.ibm.com/storage/proven
The Storage Services Enabler Package Bundle is structured
to include the first-year warranty plus two additional years of
post-warranty support for the bundle. Upon selection of the SSE Package
Bundle, customers will be required to purchase
(or already have entitlement to) two additional years of post-warranty
support on the MDS 9000 base hardware.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Four.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Seven.
- Prerequisites: None.
- Corequisites: Feature #2400.
- Corequisites for 2062-D04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of #8111
or one of #8112).
- Corequisites for 2062-T04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of #8211
or one of #8212).
- Corequisites for 2062-D07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of #8311
or one of #8312).
- Corequisites for 2062-T07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of #8411
or one of #8412).
- Compatibility Conflicts: For SSM Activation, this feature is
required for each #2400 ordered.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Cisco Coarse Wavelength-Division (CWDM) Special Features (2062-CW1)
Summary: The Cisco CWDM solution consists of a two slot (1RU) CWDM
Chassis, which accommodates up to two passive optic CWDM Mux plug-in
modules. Two types of modules are available: an 8 wavelength
multiplexer/demultiplexer module (#5364) and a 4 wavelength
multiplexer/demultiplexer module with add/drop capabilities (#5362).
The active CWDM wavelength-specific SFPs (#5311-#5318) are installed
into available Fibre Channel and IP ports within one or more MDS
Directors. Up to 8 CWDM wavelength-specific SFPs may be connected to the
passive optic CWDM Mux plug-in module, using the 1 meter or 5 meter
single mode LC/SC fiber optic jumper cables (#5220 and #5221)
Each site must include at least one CWDM Chassis. A maximum of 16
wavelength-specific SFPs are supported in any one MDS Director.
(#5311) 1470 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Grey
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5312) 1490 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Violet
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5313) 1510 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Blue
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5314) 1530 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Green
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5315) 1550 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Yellow
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5316) 1570 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Orange
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5317) 1590 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Red
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5318) 1610 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Brown
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must have one #5362 or one #5364, and at least
quantity of two SFP units (#5311 thru #5318).
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5362) 4 Wavelength Add/Drop Mux
Summary: This feature allows you to add/drop four channels.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must order at least one #5362 or one #5364, ships
with 2 Slot Chassis included in base.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5364) 8 Wavelength Mux/Demux
Summary: This feature allows you to to multiplex/demultiplex eight
separate channels.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: Two.
- Prerequisites: Must order at least one #5362 or one #5364, ships
with 2 Slot Chassis included in base.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5721) Fiber Optic Cable, Single mode, LC/SC, 1 Meter
Summary: This feature provides a single mode fiber optic cable,
LC/SC, 1 meter for the Cisco CWDM solution.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: 16.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5722) Fiber Optic Cable, Single mode, LC/SC, 5 Meter
Summary: This feature provides a single mode fiber optic cable,
LC/SC, 5 meter for the Cisco CWDM solution.
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: 16.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Cisco Post-Warranty Support Features - Model 2062-CW1
Summary: Cisco post-warranty feature codes are available for the
Cisco MDS 9000 products purchased through IBM or IBM Authorized Business
Partners, under the IBM 2062 machine type. The Cisco post-warranty
features are available at initial plant order and field installable (MES)
for customers with Cisco products currently under warranty. Cisco
post-warranty features provide the ability to establish up to two years,
24x7, on-site Cisco support, beyond the first-year warranty period.
Cisco post--arranty support, resold by IBM, is available for each of
the MT 2062 Switch and Director models, as well as for the MDS 9000 CWDM
Optical Mux Modules configured in model 2062-CW1. In order for Cisco
post-warranty support to be in effect on model 2062-CW1, the base chassis
and all installed MDS 9000 CWDM Mux Modules must be first under Cisco
warranty or Cisco post-warranty support.
Cisco post-warranty support options are subject to Cisco's standard
Post-Warranty Support Contract terms and conditions included in the
packaging with the eligible products. Some limitations apply.
IMPORTANT: SALES REPRESENTATIVES MUST CHECK SERVICE LEVEL AVAILABILITY
PRIOR TO SELLING A 24x7x4 SUPPORT CONTRACT FOR THIS PRODUCT. PLEASE
REFER TO WEBSITE PROVIDED ON E-CONFIG SALES PAGE FOR IBM 2062.
(#8501) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support(1 Year)
- Minimum Number of Features: None.
- Maximum Number of Features: Four.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card ordered.
- Compatibility Conflicts: #8501 and #8502 cannot coexist
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8502) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features: None.
- Maximum Number of Features: Two.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card ordered.
- Compatibility Conflicts: #8501 and #8502 cannot coexist
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8503) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (3 Year)
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: One.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: On initial orders (IPO) you must have
matching number of years post-warranty support on base Hardware.
- Compatibility Conflicts: Cannot coexist with #8504.
- Customer Setup: Yes.
- Limitations: Maximum post-warranty support is four years.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8504) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (4 Year)
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: One.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: On initial orders (IPO) you must have
matching number of years post-warranty support on base Hardware.
- Compatibility Conflicts: Cannot coexist with #8501, #8502, #8503.
- Customer Setup: Yes.
- Limitations: Maximum post-warranty support is four years.
- Field Installable: No, IPO only.
- Cable Order: None.
(#8511) 24x7 Same Day On-Site 4-Way Mux Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features: None.
- Maximum Number of Features: Four Per Mux Unit.
- Prerequisites: Feature #5362
- Corequisites: None.
- Compatibility Conflicts: #8511 and #8512 cannot coexist
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8512) 24x7 Same Day On-Site 4-Way Mux Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features: None.
- Maximum Number of Features: Two Per Mux Unit.
- Prerequisites: Feature #5362 and #8502.
- Corequisites: None.
- Compatibility Conflicts: #8511 and #8512 cannot coexist
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8513) 24x7 Same Day On-Site 4-Way Mux Cisco Post-Warranty Support (3 Year)
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: One.
- Prerequisites: Feature #5362.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: On initial orders (IPO) you must have
matching number of years post-warranty support on base Hardware.
- Compatibility Conflicts: Cannot coexist with #8514.
- Customer Setup: Yes.
- Limitations: Maximum post-warranty support is four years.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8514) 24x7 Same Day On-Site 4-Way Mux Cisco Post-Warranty Support (4 Year)
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: One.
- Prerequisites: Feature #5362.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: On initial orders (IPO) you must have
matching number of years post-warranty support on base Hardware.
- Compatibility Conflicts: None.
- Compatibility Conflicts: Cannot coexist with #8511, #8512, #8513.
- Limitations: Maximum post-warranty support is four years.
- Field Installable: No, IPO only.
- Cable Order: None.
(#8521) 24x7 Same Day On-Site 8-Way Mux Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features: None.
- Maximum Number of Features: Four Per Mux Unit.
- Prerequisites: Feature #5364 and #8501
- Corequisites: None.
- Compatibility Conflicts: #8521 and #8522 cannot coexist
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8522) 24x7 Same Day On-Site 8-Way Mux Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features: None.
- Maximum Number of Features: Two Per Mux Unit.
- Prerequisites: Feature #5364 and #8502.
- Corequisites: None.
- Compatibility Conflicts: #8521 and #8522 cannot coexist
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8523) 24x7 Same Day On-Site 8-Way Mux Cisco Post-Warranty Support (3 Year)
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: One.
- Prerequisites: Feature #5364.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: On initial orders (IPO) you must have
matching number of years post-warranty support on base Hardware.
- Compatibility Conflicts: Cannot coexist with #8524.
- Customer Setup: Yes.
- Limitations: Maximum post-warranty support is four years.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8524) 24x7 Same Day On-Site 8-Way Mux Cisco Post-Warranty Support (4 Year)
- Minimum Number of Features per 2062-CW1: None.
- Maximum Number of Features per 2062-CW1: One.
- Prerequisites: Feature #5364.
- Prerequisites: Must have equivlent years of post-warranty support
for base hardware.
- Corequisites: On initial orders (IPO) you must have
matching number of years post-warranty support on base Hardware.
- Compatibility Conflicts: Cannot coexist with #8521, #8522, #8523.
- Customer Setup: Yes.
- Limitations: Maximum post-warranty support is four years.
- Field Installable: No, IPO only.
- Cable Order: None.
MDS 9000 Multilayer Switch and Directors Special Features
(#2010) Supervisor Module
Summary: The Cisco MDS 9500 Supervisor Module is designed to provide
crossbar switch and intelligent control functions to enable high
availability, scalability, security, and multiprotocol-capable support
for both Fibre Channel fabrics and connection to Gigabit Ethernet
networks. You must select two Supervisor Modules for the Cisco
Multilayer Director MDS 9506 (2062-D04/T04).
- Minimum Number of Features per 2062-D04/T04: Two.
- Maximum Number of Features per 2062-D04/T04: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Must order two Supervisor Modules
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Cisco Modules
IBM is currently reselling the following Cisco Modules:
- (#2116) 16-Port Fibre Channel Module
- (#2132) 32-Port Fibre Channel Module
- (#2208) 8 Port IPS Module
- (#2214) Multiprotocol Services Module
- (#2218) 4 Port IPS Module
- (#2300) Initial Caching Services Module
- (#2301) Additional Caching Services Module
The total number of modules is determined by the available module
slots in the model chassis:
For the MDS 9216 (2062-D01) you can select one additional module of
any type; #2116, #2132, #2208, #2214, #2218, #2300, #2301.
Maximum allowed is one.
Note: When ordering the Caching Services Modules (#2300/#2301) for the
Model D01, the additional module (#2301) is required to be configured
into a second D01 chassis. The second Model D01 can be either a new D01
order, or an existing D01 with an available line card slot.
For the MDS 9506 (2062-D04/T04) you must select one Fibre Channel port
card; either #2116 or #2132. For the D04/T04 you may order one pair of
#2300/#2301 modules. The maximum number of modules is four, including
#2116, #2132, #2208, #2214, #2218, #2300, and #2301.
For the MDS 9509 (2062-D07/T07) you must select one Fibre Channel port
card; either #2116 or #2132. For the D07/T07 you may order two pair of
#2300/#2301 modules. The maximum number of modules is seven, including
#2116, #2132, #2208, #2214, #2218, #2300, and #2301.
Fibre Channel Line Cards
Summary: You can select additional 16-or 32-Port Fibre Channel Line
Cards for Cisco MDS 9000 Multilayer Switch and Director products (IBM
2062).
For the Cisco MDS 9216 (2062-D01), you can select one additional 16-or
32-port card.
For the Cisco MDS 9506 (2062-D04/T04) you must order a minimum of one
Fibre Channel Line Card, either 16-port (#2116), or 32-port (#2132).
For the Cisco MDS 9509 (2062-D07/T07) you must order a minimum of one
Fibre Channel Line Card, either 16-port (#2116), or 32-port (#2132).
Note: 16-Port Fibre Channel Line Cards (#2116) are recommended for
performance and ISL applications.
All fibre channel ports exclude separately orderable optics, features
#5210, #5220, #5230, and #5240.
(#2116) 16-Port Fibre Channel Line Card
Summary: This feature provides a 16-Port Fibre Channel Line Card
(excluding optics).
(#2132) 32-Port Fibre Channel Line Card
Summary: This feature provides a 32-Port Fibre Channel Line Card
(excluding optics).
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Minimum Number of Features per 2062-D04/T04: One.
- Maximum Number of Features per 2062-D04/T04: Four.
- Minimum Number of Features per 2062-D07/T07: One.
- Maximum Number of Features per 2062-D07/T07: Seven.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Min/Max totals are quantities for both
features #2116 and #2132.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
IP Line Cards for iSCSI and FCIP
Summary: You can select IP Line Cards for Cisco MDS 9000 Multilayer
Switch and Director products (IBM 2062) for connection to Gigabit
Ethernet networks and support for iSCSI. FCIP Activation requires
ordering feature the activation features (#2209/#2210) with the 8-Port IP
Line Card.
For the Cisco MDS 9216 (2062-D01), you can select one additional
8-port IP line card.
For the Cisco MDS 9506 (2062-D04/T04), you can select up to an
additional three 8-port IP line cards.
For the MDS 9509 (IBM 2062-D07/T07), you can select up to an
additional five 8-port IP Line Cards.
The 8-port IP line card excludes separately orderable optics, features
#5210, and #5220. The 8-Port IP Line Card is compatible with the
Tri-Rate SFP Transceivers only.
(#2208) 8-Port IP Line Card
Summary: This feature provides an 8-Port IP Line Card (excluding
optics) for connection to Gigabit Ethernet networks and support for iSCSI
and FCIP capabilities. FCIP Activation requires ordering the FCIP
Activation Services Line Card, #2209 for the MDS 9216 or #2210 for the
MDS 9506 and MDS 9509.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Three.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Five.
- Prerequisites: None.
- Corequisites: #2208 only uses Tri-Rate SFP Transceivers (#5210 and
#5220).
- Compatibility Conflicts: For FCIP Activation; requires feature #2209
or #2210 for each #2208 ordered.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2209) FCIP Activation for the MDS 9216 Fabric Switch (2062-D01)
Summary: This feature provides FCIP Activation for the Cisco 8-Port
IP Services Line Card (#2208) to enable extended distance fabric
capabilities over LAN and WAN connections for the MDS 9216 Fabric Switch
(2062-D01).
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: Feature #2208.
- Compatibility Conflicts: For FCIP Activation; this feature is
required for each #2208 ordered.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2210) FCIP Activation for Cisco MDS 9500 Multilayer Directors
Summary: This feature provides FCIP Activation for the Cisco 8-Port
IP Services Line Card (#2208) to enable extended distance fabric
capabilities over LAN and WAN connections for the MDS 9506
(2062-D04/T04), and MDS 9509 (2062-D07/T07).
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Three.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Five.
- Prerequisites: None.
- Corequisites: Feature #2208.
- Compatibility Conflicts: For FCIP Activation; this feature is
required for each #2208 ordered.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2214) Multiprotocol Services Module
Summary: This feature provides a Multiprotocol Services Module
(excluding optics) for connection to Fibre Channel and Gigabit Ethernet
networks and support for iSCSI and FCIP capabilities. FCIP Activation
requires ordering the FCIP Activation for Multiprotocol Services
Module, #2215 (D01/T01), #2216 (D04/T04, D07/T07) for each
Multiprotocol Services Module.
The Multiprotocol Services Module IP ports are compatible with the
Tri-Rate SFP Transceivers (#5210 and #5220) and the CWDM
wavelength-specific SFPs (#5311-#5318).
The Multiprotocol Services Module Fibre Channel ports
are compatible with the
Fibre Channel SFP (#5230 and #5240), Tri-Rate SFP Transceivers (#5210 and
#5220) and the CWDM wavelength-specific SFPs (#5311-#5318).
- Minimum Number of Features per 2062-D01/T01: None.
- Maximum Number of Features per 2062-D01/T01: One.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Four.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Seven.
- Prerequisites: None.
- Corequisites: Must include at least one Tri-Rate SFP Transceivers
(#5210, or #5220) or CWDM SFPs (#5311-#5318) in one IP ports.
All 14 FC Ports must be populated with FC SFP Tranceivers (#5210-#5240,
or #5311-#5318).
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
base Hardware and Software Packages must both be under current
warranty or post-warranty support.
- Cable Order: None.
(#2215) FCIP Activation for MDS 9200 Multiprotocol Services Module
Summary: This feature provides FCIP Activation for the Cisco
Multiprotocol Services Module (#2214) to enable extended distance fabric
capabilities over LAN and WAN connections for the MDS 9216
Fabric Switch (2062-D01/T01).
- Minimum Number of Features per 2062-D01/T01: None.
- Maximum Number of Features per 2062-D01/T01: One.
- Prerequisites: None.
- Corequisites: Feature #2214.
- Compatibility Conflicts: For FCIP Activation, this feature is
required for each #2214 ordered.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2216) FCIP Activation for MDS 9500 Multiprotocol Services Module
Summary: This feature provides FCIP Activation for the Cisco
Multiprotocol Services Module (#2214) to enable extended distance fabric
capabilities over LAN and WAN connections for the MDS 9506
(2062-D04/T04), and MDS 9509 (2062-D07/T07).
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Four.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Seven.
- Prerequisites: None.
- Corequisites: Feature #2214.
- Compatibility Conflicts: For FCIP Activation, this feature is
required for each #2214 ordered.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2218) 4 Port IPS Servcies Module
Summary: This feature provides a 4 Port IPS Servcies Module
(excluding optics) for connection to Gigabit Ethernet networks and
support for iSCSI and FCIP capabilities. FCIP Activation requires
ordering the FCIP Activation for 4 Port IPS Services Module, #2219 (D01)
or #2220 (D04/T04, D07/T07) for each 4 Port IPS Servcies Module.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Three
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Five
- Prerequisites: None.
- Corequisites: #2218 only uses Tri-Rate SFP Transceiver (#5210 and
#5220), and CWDM wavelength-specific SFPs (#5311-#5318).
- Compatibility Conflicts: For FCIP Activation, requires feature #2219
or #2220 for each #2218 ordered.
- Compatibility Conflicts: See Minimum/Maximum for all Modules per
Model above.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2219) FCIP Activation for 4 Port IPS Services Module for Cisco MDS 9216 Multilayer Fabric Switch
Summary: This feature provides FCIP Activation on the Cisco 4 Port IP
Services Module (#2218) to enable extended distance fabric capabilities
over LAN and WAN connections for the MDS 9506 (2062-D01).
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: Feature #2218.
- Compatibility Conflicts: For FCIP Activation; this feature is
required for each #2218 ordered.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#2220) FCIP Activation for 4 Port IP Services Module for Cisco MDS
9506 Multilayer Director/Cisco MDS 9509 Multilay er Director
Summary: This feature provides FCIP Activation on the Cisco 4 Port IP
Services Module (#2218) to enable extended distance fabric capabilities
over LAN and WAN connections for the MDS 9506 (2062-D04/T04), and MDS
9509 (2062-D07/T07).
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Three.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Five.
- Prerequisites: None.
- Corequisites: Feature #2218.
- Compatibility Conflicts: For FCIP Activation; this feature is
required for each #2218 ordered.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Caching Services Modules
Cisco MDS 9000 Caching Services Modules (#2300/#2301) are designed to
provide advanced virtualization technology for use with IBM TotalStorage
SAN Volume Controller Storage Software for Cisco 9000 when used with
Cisco MDS 9216 (2062-D01), MDS 9506 (2062-D04/T04), and MDS 9509
(2062-D07/T07) Switches and Directors. Caching Services Modules support
scalable, in-band storage virtualization services within the network,
high-availability and network-hosted replication services. The
high-availability cluster solution design combines two MDS 9000 Caching
Services Modules, complete with redundant processors, 16 GB of mirrored
cache memory, and battery backup. This cluster delivers the functions
provided by the SAN Volume Controller Storage Software for Cisco MDS
9000.
(#2300) Initial Caching Services Module
Summary: This feature provides the Initial Cisco MDS 9000 Caching
Services Module, which is used to configure a high-availability cluster.
In order to complete the cluster, customers are required to purchase
separate entitlement to IBM TotalStorage SAN Volume Controller Storage
Software for Cisco MDS 9000, as well as one unit of #2301 Additional
Caching Services Module, and one unit of #9930 Ship Group for Caching
Services Module, which provides the necessary user manuals and reference
guides.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Two.
- Prerequisites: None.
- Corequisites: SAN Volume Controller (SVC) SW PID - MTM#5639-VS1;
- Corequisites: Must buy one feature #2301 with each #2300.
- Corequisites: Must order one feature #9930 with each #2300.
- Compatibility Conflicts: See Minimum/Maximum for all Line Cards per
Model above.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, MES only.
- Cable Order: None.
(#2301) Additional Caching Services Module
Summary: This feature provides an additional Cisco MDS 9000 Caching
Services Module, which is used to configure a high-availability cluster.
This feature is mandatory and is ordered at the same time as #2300, along
with the other items required to complete the cluster, as described in
feature #2300.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Two.
- Prerequisites: None.
- Corequisites: Requires feature #2300.
- Compatibility Conflicts: See Minimum/Maximum for all Line Cards per
Model above. For the 2062-D01 features #2300 and #2301 will be
configured into two different 2062-D01 chassis.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, MES only.
- Cable Order: None.
SFP Transceivers
Summary: Fibre Channel ports on the IBM 2062 may be configured to
accept either Short Wave SFP or Long Wave SFP optic transceivers.
Fibre Channel ports on the Cisco MDS 9216 Switch, MDS 9506 and MDS
9509 Director may be configured to accept either SW SFP, LW SFP, or CWDM
SFP optic transceivers; however, when ordering, all available Fibre
Channel ports must be populated with SFP optic transceivers. Fibre
Channel Modules are compatible with Fibre Channel specific SFPs (#5230
and #5240), Tri-Rate SFPs (#5210 and #5220), and CWDM wavelength-specific
SFPs (#5311-#5318).
The 4 Port and 8 Port IPS Services Module ports may be ordered with
Short Wave or Long Wave Tri-Rate SFP optic transceivers; and CWDM
wavelength-specific SFPs (#5311-#5318); however, only one SFP is required
as a minimum configuration. The 4 Port and 8 Port IP Services Module are
compatible with the Tri-Rate SFPs (#5210 and #5220), CWDM
wavelength-specific SFPs (#5311-#5318)
Minimum quantities listed represent the number of ports available in
the base configuration.
Cisco CWDM Solution SFP Transceivers
Summary: The CWDM wavelength-specific SFPs (#5311-#5318) each operate
at one of eight wavelengths and may be configured into any available port
on the optional Fibre Channel port card or IP IPS Services port card
features. When customers require addition of CWDM mux capability, the
Cisco Eight Channel CWDM MUX Solution (2062-CW1) may be ordered
separately, to transmit multiple wavelengths over a shared extended
distance fiber optic cable.
(#5210) Tri-Rate SW SFP Transceiver
Summary: This feature provides a Tri-Rate (1 and 2 GB/s and Gigabit
Ethernet) short wave SFP transceiver for the IBM 2062.
(#5220) Tri-Rate LW SFP Transceiver
Summary: This feature provides a Tri-Rate (1 and 2 GB/s and Gigabit
Ethernet) long wave SFP transceiver for the IBM 2062.
(#5230) FC SW SFP Transceiver
Summary: This feature provides a FC short wave SFP transceiver for
the IBM 2062.
(#5240) FC LW SFP Transceiver
Summary: This feature provides a FC long wave SFP transceiver for the
IBM 2062.
- Minimum Number of Features per 2062-D01: 16.
- Maximum Number of Features per 2062-D01: 48.
- Minimum Number of Features per 2062-D04/T04: 16.
- Maximum Number of Features per 2062-D04/T04: 128.
- Minimum Number of Features per 2062-D07/T07: 16.
- Maximum Number of Features per 2062-D07/T07: 224.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Min/Max totals are quantities for features
#5210, #5220, #5230 and #5240.
- Customer Setup: No.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5311) 1470 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Grey
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5312) 1490 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Violet
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5313) 1510 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Blue
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5314) 1530 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Green
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5315) 1550 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Yellow
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5316) 1570 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Orange
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5317) 1590 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Red
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5318) 1610 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Brown
Summary: This feature provides one wavelength-specific CWDM SFP.
- Minimum Number of Features per 2062-D01/D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D01/D04/T04/D07/T07: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts:
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Fiber Channel Optic Cables
Summary. A fiber optic cable is required for attaching the Cisco MDS
9000 family switch or director to host computer system adapters, or other
Fibre Channel storage area components. The fiber optic cable can be
customer supplied, and must meet specifications defined by Cisco Systems.
Where a limited distance connection exists, fiber optic cables can be
ordered with Cisco products from IBM with the following features:
(#5601) 1 m Fiber Channel Cable
This feature provides a multimode optical 50.0u cable, 1.0 meters in
length.
(#5605) 5 m Fiber Channel Cable
This feature provides a multimode optical 50.0u cable, 5.0 meters in
length.
(#5625) 25 m Fiber Channel Cable
This feature provides a multimode optical 50.0u cable, 25.0 meters in
length.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: 48.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: 128.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: 224.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both MES and IPO.
- Cable Order: None.
Fiber Channel Cable Couplers
(#5701) SC/LC Coupling Cable - 8 inch
This feature provides a fiber cable coupler, multimode (50u), duplex
SC (gender/gender), LC (gender/gender) which will allow you to attach an
existing fiber cable with SC type connectors to a port with a LC type
connector.
(#5702) LC/SC Coupling Cable- 2 meter
This feature provides a fiber cable coupler, multimode (50u), duplex
LC (gender/gender), SC (gender/gender) which will allow you to attach an
existing fiber cable with LC type connectors to a port with a SC type
connector.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: 48.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: 128.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: 224.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both MES and IPO.
- Cable Order: None.
Memory
(#5810) Cicso Flash Memory Card
Ordering this feature in your initial plant order (IPO) will provide
additional memory for the IBM 2062 Models D04 and T04.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Two.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#5811) Cicso Spare Flash Memory Card
- Minimum Number of Features per 2062-D04 and T04: None.
- Maximum Number of Features per 2062-D04 and T04: 255.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, MES only.
- Cable Order: None.
Cisco MDS 9000 Enterprise Packages
Cisco MDS 9000 Enterprise Features
(#7010) Cisco MDS 9000 Enterprise Package Bundle for 2062-D01
(No Longer Available as of June 24, 2005)
Summary: The Cisco MDS 9000 Enterprise Package Bundle is designed to
provide enhanced security and management features, bundled for
convenience and added flexibility. The Cisco MDS 9000 Enterprise Package
Bundle includes the following capabilities: LUN Zoning, Read-only zones,
Port lockdown. The Cisco MDS 9000 Enterprise Package Bundle is
structured to include the first-year software warranty plus two
additional years of post-warranty support for the software package. Upon
selection of the Cisco MDS 9000 Enterprise Package Bundle, customers will
be required to purchase (or already own) two additional years of
post-warranty support on the MDS 9000 base hardware.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: Must have two additional years of post-warranty
support on the MDS 9000 base hardware (either two of #8011 or one of
#8012).
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Enterprise Package Bundle to enable full
set of functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7011) Cisco MDS 9000 Enterprise Package for 2062-D01
Summary: The Cisco MDS 9000 Enterprise Package is designed to provide
enhanced security and management features, bundled for convenience and
added flexibility. The Cisco MDS 9000 Enterprise Package includes the
following capabilities: LUN Zoning, Read-only zones, Port lockdown. The
MDS 9000 Enterprise Package includes the first-year software warranty as
part of the base product warranty.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7010.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Enterprise Package to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7020) Cisco MDS 9000 Enterprise Package Bundle for 2062-D04/T04/D07/T07
(No Longer Available as of June 24, 2005)
Summary: The Cisco MDS 9000 Enterprise Package Bundle is designed to
provide enhanced security and management features, bundled for
convenience and added flexibility. The Cisco MDS 9000 Enterprise Package
Bundle includes the following capabilities: LUN Zoning, Read-only zones,
Port lockdown. The Cisco MDS 9000 Enterprise Package Bundle is
structured to include the first-year software warranty plus two
additional years of post-warranty support for the software package. Upon
selection of the Cisco MDS 9000 Enterprise Package Bundle, customers will
be required to purchase (or already own) two additional years of
post-warranty support on the MDS 9000 base hardware.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One.
- Prerequisites: None.
- Corequisites for 2062-D04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8111 or one of #8112).
- Corequisites for 2062-T04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8211 or one of #8212).
- Corequisites for 2062-D07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8311 or one of #8312).
- Corequisites for 2062-T07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8411 or one of #8412).
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Enterprise Package Bundle to enable full
set of functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7021) Cisco MDS 9000 Enterprise Package for 2062-D04/T04/D07/T07
Summary: The Cisco MDS 9000 Enterprise Package is designed to provide
enhanced security and management features, bundled for convenience and
added flexibility. The Cisco MDS 9000 Enterprise Package includes the
following capabilities: LUN Zoning, Read-only zones, Port lockdown. The
MDS 9000 Enterprise Package includes the first-year software warranty as
part of the base product warranty.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7020.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Enterprise Package to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Cisco MDS 9000 Fabric Manager Server Package Bundle
(#7015) MDS 9216 Fabric Manager Server Package Bundle for 2062-D01:
(No Longer Available as of June 24, 2005)
Summary: The Cisco MDS 9216 Fabric Manager Server Bundle extends
Cisco Fabric Manager by helping provide historical performance data
collection for network traffic hot-spot analysis, centralized management
services and support for advanced application integration. The Cisco FMS
Package Bundle is structured to include the first-year software warranty
plus two additional years of post-warranty support for the software
package. Upon selection of the Cisco FMS Package Bundle, customers will
be required to purchase (or already own) two additional years of
post-warranty support on the MDS 9000 base hardware.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: None.
- Corequisites: Must have two additional years of post-warranty
support on the MDS 9000 base hardware (either two of #8011 or one of
#8012).
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 FMS Package Bundle to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7016) MDS 9216 Fabric Manager Server Package for 2062-D01
Summary: The Cisco MDS 9216 Fabric Manager Server Package extends
Cisco Fabric Manager by helping provide historical performance data
collection for network traffic hot-spot analysis, centralized management
services and support for advanced application integration. The MDS 9216
Fabric Manager Server Package includes the first-year software warranty
as part of the base product warranty.
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7015.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 FMS Package to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7025) MDS 9500 Fabric Manager Server Package Bundle for 2062-D04/T04 and 2062-D07/T07
(No Longer Available as of June 24, 2005)
Summary: The Cisco MDS 9500 Fabric Manager Server Bundle extends
Cisco Fabric Manager by helping provide historical performance data
collection for network traffic hot-spot analysis, centralized management
services and support for advanced application integration. The Cisco FMS
Package Bundle is structured to include the first-year software warranty
plus two additional years of post-warranty support for the software
package. Upon selection of the Cisco FMS Package Bundle, customers will
be required to purchase (or already own) two additional years of
post-warranty support on the MDS 9000 base hardware.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One.
- Prerequisites: None.
- Corequisites for 2062-D04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two
of #8111 or one of #8112).
- Corequisites for 2062-T04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8211 or one of #8212).
- Corequisites for 2062-D07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8311 or one of #8312).
- Corequisites for 2062-T07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8411 or one of #8412).
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 FMS Package Bundle to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7026) MDS 9500 Fabric Manager Server Package for 2062-D04/T04/D07/T07
Summary: The Cisco MDS 9500 Fabric Manager Server Package extends
Cisco Fabric Manager by helping provide historical performance data
collection for network traffic hot-spot analysis, centralized management
services and support for advanced application integration. The MDS 9500
Fabric Manager Server Package includes the first-year software warranty
as part of the base product warranty.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One.
- Prerequisites: None.
- Corequisites for 2062-D04: None.
- Compatibility Conflicts: Can not co-exist with feature #7025.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 FMS Package to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Cisco MDS 9000 Mainframe Package Bundle
(#7030) MDS 9216 Mainframe Package Bundle for 2062-D01
(No Longer Available as of June 24, 2005)
The Cisco MDS 9216 Mainframe Package Bundle provides a collection of
advanced features to enable MDS 9000 operation in mainframe storage
network applications. The Cisco Mainframe Package Bundle is structured
to include the first-year software warranty plus two additional years of
post-warranty support for the software package. Upon selection of the
Cisco Mainframe Package Bundle, customers will be required to purchase
(or already own) two additional years of post-warranty support on the MDS
9000 base hardware. The Cisco Mainframe Package includes the following
functions:
- Mainframe FICON protocol
- FICON Control Unit Port (CUP)
- VSANs for FICON and FCP intermixing
- FICON Switch Cascading
- Fabric Binding
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: None.
- Corequisites: Must have two additional years of post-warranty
support on the MDS 9000 base hardware (either two of #8011 or one of
#8012).
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Mainframe Package Bundle to enable full
set of functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7031) MDS 9216 Mainframe Package for 2062-D01
The Cisco MDS 9216 Mainframe Package provides a collection of advanced
features to enable MDS 9000 operation in mainframe storage network
applications. The MDS 9216 Mainframe Package includes the first-year
software warranty as part of the base product warranty. The Cisco
Mainframe Package includes the following functions:
- Mainframe FICON protocol
- FICON Control Unit Port (CUP)
- VSANs for FICON and FCP intermixing
- FICON Switch Cascading
- Fabric Binding
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7030.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Mainframe Package to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7035) MDS 9500 Mainframe Package Bundle
(No Longer Available as of June 24, 2005)
For 2062-D04/T04 and D07/T07 The Cisco MDS 9500 Mainframe Package
Bundle
provides a collection of advanced features to enable MDS 9000 operation
in mainframe storage network applications. The Cisco Mainframe Package
Bundle is structured to include the first-year software warranty plus two
additional years of post-warranty support for the software package. Upon
selection of the Cisco Mainframe Package Bundle, customers will be
required to purchase (or already own) two additional years of
post-warranty support on the MDS 9000 base hardware. The Cisco Mainframe
Package Bundle includes the following functions:
- Mainframe FICON protocol
- FICON Control Unit Port (CUP)
- VSANs for FICON and FCP intermixing
- FICON Switch Cascading
- Fabric Binding
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One.
- Prerequisites: None.
- Corequisites for 2062-D04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8111 or one of #8112).
- Corequisites for 2062-T04: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8211 or one of #8212).
- Corequisites for 2062-D07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8311 or
one of #8312).
- Corequisites for 2062-T07: Must have two additional years of
post-warranty support on the MDS 9000 base hardware (either two of
#8411 or one of #8412).
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Mainframe Package Bundle to enable full
set of functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7036) MDS 9500 Mainframe Package for 2062-D04/T04/D07/T07
The Cisco MDS 9500 Mainframe Package provides a collection of advanced
features to enable MDS 9000 operation in mainframe storage network
applications. The MDS 9500 Mainframe Package includes the first-year
software warranty as part of the base product warranty. The Cisco
Mainframe Package includes the following functions:
- Mainframe FICON protocol
- FICON Control Unit Port (CUP)
- VSANs for FICON and FCP intermixing
- FICON Switch Cascading
- Fabric Binding
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7035.
- Customer Setup: Yes.
- Limitations: All MDS 9000 Switches and Directors in the fabric must
purchase and activate MDS 9000 Mainframe Package to enable full set of
functionality.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Cisco Post-Warranty Support Features - MT2062 Switch and Director Models
Cisco Post-Warranty Support Features for Line Cards
Cisco Post-warranty Support Features for Line Cards
(#6211) 24x7 Same Day On-Site Storage Services Module Cisco Post-Warranty Support (1 Yr)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Four per Line Card.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Four per Line Card.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Four per Line Card.
- Prerequisites: Feature #2400.
- Corequisites: Must order equivalent number of years of post-warranty
support for base hardware (D01: #8011-#8014, D04: #8111-#8114,
T04: #8211-#8214, D07: #8311-#8314, T07: #8411-#8414).
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Line Card must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#6212) 24x7 Same Day On-Site Storage Services Module Cisco Post-Warranty Support (2 Yr)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two per Line Card.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Two per Line Card.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: Two per Line Card.
- Prerequisites: Feature #2400.
- Corequisites: Must order equivalent number of years of post-warranty
support for base hardware (D01: #8011-#8014, D04: #8111-#8114,
T04: #8211-#8214, D07: #8311-#8314, T07: #8411-#8414).
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Line Card must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#6213) 24x7 Same Day On-Site Storage Services Module Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One per Line Card.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One per Line Card.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One per Line Card.
- Prerequisites: Feature #2400.
- Corequisites: Must order equivalent number of years of post-warranty
support for base hardware (D01: #8011-#8014, D04: #8111-#8114,
T04: #8211-#8214, D07: #8311-#8314, T07: #8411-#8414).
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6214) 24x7 Same Day On-Site Storage Services Module Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One per Line Card.
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One per Line Card.
- Minimum Number of Features per 2062-D07/T07: None.
- Maximum Number of Features per 2062-D07/T07: One per Line Card.
- Prerequisites: Feature #2400.
- Corequisites: Must order equivalent number of years of post-warranty
support for base hardware (D01: #8011-#8014, D04: #8111-#8114,
T04: #8211-#8214, D07: #8311-#8314, T07: #8411-#8414).
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: Maximum years of post-warranty support is four years.
- Field Installable: No, IPO only.
- Cable Order: None.
Cisco Post-warranty Support Features for base hardware
Cisco post-warranty support features, resold by IBM, are available for
each of the Cisco MDS 9000 products purchased through IBM or IBM
Authorized Business Partners, under the IBM 2062 machine type. The Cisco
post-warranty features are available at initial plant order and field
install (MES) for customers with Cisco products currently under warranty.
Cisco post-warranty features provide the ability to establish up to four
years, 24x7, on-site Cisco support, beyond the first-year warranty
period.
Cisco post-warranty support options are subject to Cisco's standard
Post-Warranty Support Contract terms and conditions included in the
packaging with the eligible products. Some limitations apply.
IMPORTANT: SALES REPRESENTATIVES MUST CHECK SERVICE LEVEL
AVAILABILITY PRIOR TO SELLING A 24x7x4 SUPPORT CONTRACT FOR THIS PRODUCT.
PLEASE REFER TO WEBSITE PROVIDED ON E-CONFIG SALES PAGE FOR IBM 2062.
24x7 Same Day On-site Base Hardware Cisco Post-Warranty
Support is orderable with the following feature numbers.
Cisco Post-Warranty Support
Product 1 Yr 2 Yr 3 Yr 4 Yr
-------------------------- ----- ----- ----- -----
2062-D01 (Cisco MDS 9216) #8011 #8012 #8013 #8014
2062-D04 (Cisco MDS 9506) #8111 #8112 #8113 #8114
2062-T04 (Cisco MDS 9506) #8211 #8212 #8213 #8214
2062-D07 (Cisco MDS 9509) #8311 #8312 #8313 #8314
2062-T07 (Cisco MDS 9509) #8411 #8412 #8413 #8414
(#8011) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Four.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8012) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8013) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8014) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#8111) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D04: None.
- Maximum Number of Features per 2062-D04: Four.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8112) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D04: None.
- Maximum Number of Features per 2062-D04: Two.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8113) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D04: None.
- Maximum Number of Features per 2062-D04: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8114) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D04: None.
- Maximum Number of Features per 2062-D04: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#8211) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-T04: None.
- Maximum Number of Features per 2062-T04: Four.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8212) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-T04: None.
- Maximum Number of Features per 2062-T04: Two.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8213) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-T04: None.
- Maximum Number of Features per 2062-T04: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8214) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-T04: None.
- Maximum Number of Features per 2062-T04: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#8311) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D07: None.
- Maximum Number of Features per 2062-D07: Four.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8312) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D07: None.
- Maximum Number of Features per 2062-D07: Two.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8313) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D07: None.
- Maximum Number of Features per 2062-D07: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8314) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D07: None.
- Maximum Number of Features per 2062-D07: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#8411) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-T07: None.
- Maximum Number of Features per 2062-T07: Four.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8412) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-T07: None.
- Maximum Number of Features per 2062-T07: Two.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#8413) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-T07: None.
- Maximum Number of Features per 2062-T07: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#8414) 24x7 Same Day On-Site Base HW Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-T07: None.
- Maximum Number of Features per 2062-T07: One.
- Prerequisites: None.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card and software package ordered.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
Cisco Post-Warranty Support Features for Modules
Cisco post-warranty support features, resold by IBM, are available for
each of the IBM 2062 Switch and Director models, as well as for optional
features such as MDS 9000 Modules. In order for Cisco post-warranty
support to be in effect on MDS 9000 Module features, the base Switch or
Director model must first be under Cisco warranty or Cisco post-warranty
support. The Cisco post-warranty support features are available at
initial plant order and field install, and provide the ability to
establish up to four years, 24x7, on-site Cisco support, beyond the
first-year warranty period.
Cisco post-warranty support options are subject to Cisco's standard
Post-Warranty Support Contract terms and conditions included in the
packaging with the eligible products. Some limitations apply.
When ordering Cisco post-warranty features for field installation
(MES), the customer must sign the Cisco Master Service Agreement (MSA).
The MSA is required prior to IBM being able to order Cisco post-warranty
support as MES.
Note: SALES REPRESENTATIVES MUST CHECK SERVICE LEVEL AVAILABILITY PRIOR
TO SELLING A 24x7x4 SUPPORT CONTRACT FOR THIS PRODUCT. REFER TO WEBSITE
PROVIDED ON E-CONFIG SALES PAGE FOR IBM 2062.
24x7 Same Day On-Site Module Cisco Post-Warranty Support is orderable
with the following feature numbers.
Cisco Post-Warranty Support
Product 1 Yr 2 Yr 3 Yr 4 Yr
---------------------------- ----- ----- ----- -----
2062 Models D04, and T04:
Supervisor Module (#2010) #6001 #6002 #6003 #6004
2062 Models D01, D04/T04, D07/T07:
16-Port Module (#2116) #6011 #6012 #6013 #6014
32-Port Module (#2132) #6021 #6022 #6023 #6024
8 Port IPS Module (#2208) #6101 #6102 #6103 #6104
MPS Module (#2214) #6105 #6106 #6107 #6108
4 Port IPS Module (#2218) #6111 #6112 #6113 #6114
Caching Svc Mod (#2300/2301) #6201 #6202 #6203 #6204
(#6001) 24x7 Same Day On-Site Supervisor Card Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Four per Line Card.
- Prerequisites: Feature #2010.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6002) 24x7 Same Day On-Site Supervisor Card Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: Two per Line Card.
- Prerequisites: Feature #2010.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6003) 24x7 Same Day On-Site Supervisor Card Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One per Line Card.
- Prerequisites: Feature #2010.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6004) 24x7 Same Day On-Site Supervisor Card Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D04/T04: None.
- Maximum Number of Features per 2062-D04/T04: One per Line Card.
- Prerequisites: Feature #2010.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#6011) 24x7 Same Day On-Site 16-Port FC Card Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Four per Line Card.
- Prerequisites: Feature #2116.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6012) 24x7 Same Day On-Site 16-Port FC Card Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Two per Line Card.
- Prerequisites: Feature #2116.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6013) 24x7 Same Day On-Site 16-Port FC Card Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2116.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6014) 24x7 Same Day On-Site 16-Port FC Card Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2116.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#6021) 24x7 Same Day On-Site 32-Port FC Card Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Four per Line Card.
- Prerequisites: Feature #2132.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6022) 24x7 Same Day On-Site 32-Port FC Card Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Two per Line Card.
- Prerequisites: Feature #2132.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6023) 24x7 Same Day On-Site 32-Port FC Card Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2132.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6024) 24x7 Same Day On-Site 32-Port FC Card Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2132.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#6101) 24x7 Same Day On-Site 8-Port IP Card Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Four per Line Card.
- Prerequisites: Feature #2208.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6102) 24x7 Same Day On-Site 8-Port IP Card Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Two per Line Card.
- Prerequisites: Feature #2208.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6103) 24x7 Same Day On-Site 8-Port IP Card Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2208.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6104) 24x7 Same Day On-Site 8-Port IP Card Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2208.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#6105) 24x7 Same Day On-site Multiprotocol Services Module Post-Warranty Support (1 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Four per Line Card.
- Prerequisites: Feature #2214.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
product must be under current warranty.
- Cable Order: None.
(#6106) 24x7 Same Day On-site Multiprotocol Services Module Post-Warranty Support (2 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Two per Line Card.
- Prerequisites: Feature #2214.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
product must be under current warranty.
- Cable Order: None.
(#6107) 24x7 Same Day On-site Multiprotocol Services Module Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2214.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6108) 24x7 Same Day On-site Multiprotocol Services Module Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2214.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#6111) 24x7 Same Day On-Site 4 Port IPS Module Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Four per Line Card.
- Prerequisites: Feature #2218.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes , both IPO and MES
- Cable Order: None.
(#6112) 24x7 Same Day On-Site 4 Port IPS Module Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Two per Line Card.
- Prerequisites: Feature #2218.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#6113) 24x7 Same Day On-Site 4 Port IPS Module Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2218.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6114) 24x7 Same Day On-Site 4 Port IPS Module Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Feature #2218.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#6201) 24x7 Same Day On-Site Caching Services Card Cisco Post-Warranty Support (1 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Four per Line Card.
- Prerequisites: Feature #2300, and #2301.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6202) 24x7 Same Day On-Site Caching Services Card Cisco Post-Warranty Support (2 Year)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: Two per Line Card.
- Prerequisites: Feature #2300, and #2301.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, product
must be under current warranty.
- Cable Order: None.
(#6203) 24x7 Same Day On-Site Caching Services Card Cisco Post-Warranty Support (3 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Features #2301, and #2301.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#6204) 24x7 Same Day On-Site Caching Services Card Cisco Post-Warranty Support (4 Yr)
- Minimum Number of Features per 2062-D01/D04/T04: None.
- Maximum Number of Features per 2062-D01/D04/T04: One per Line Card.
- Prerequisites: Features #2300, and #2301.
- Corequisites: For IPO, you must order the equivalent number of years
of post-warranty support for each line card.
- Corequisites: Base product must be under Cisco warranty or
post-warranty support.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
Cisco Post-Warranty Support Features for MDS 9000 Software Packages
Cisco post-warranty support features, resold by IBM, available for
each of the IBM 2062 Switch and Director models, are also available for
optional features such as MDS Enterprise, MDS Fabric Manager and MDS
Mainframe Packages. In order for Cisco post-warranty support to be in
effect on MDS 9000 software features, the base Switch or Director model
must first be under Cisco warranty or Cisco post-warranty support. The
Cisco post-warranty support features are available at initial plant order
and field install, and provide the ability to establish an additional
year of Cisco support, beyond the first-year warranty period.
Cisco post-warranty support options are subject to Cisco's standard
Post-Warranty Support Contract terms and conditions included in the
packaging with the eligible products. Some limitations apply.
When ordering Cisco post-warranty features for field installation
(MES), the customer must sign the Cisco Master Service Agreement (MSA).
The MSA is required prior to IBM being able to order Cisco post-warranty
support as MES.
Cisco Post-Warranty Support for MDS Software Packages are orderable
with the following feature numbers:
Cisco Post-Warranty Support
Product 1 Yr 2 Yr 3 Yr 4 Yr
-------------------------------- ----- ----- ----- -----
2062 Models D01:
MDS 9216 Enterprise Pkg (#7011) #7012 #7113 #7114 #7115
MDS 9216 Fabric Mgr Pkg (#7016) #7017 #7118 #7119 #7120
MDS 9216 Mainframe Pkg (#7031) #7032 #7133 #7134 #7135
2062 Models D04/T04, D07/T07:
MDS 9500 Enterprise Pkg (#7021) #7022 #7123 #7124 #7125
MDS 9500 Fabric Mgr Pkg (#7026) #7027 #7128 #7129 #7130
MDS 9500 Mainframe Pkg (#7036) #7037 #7138 #7139 #7140
(#7012) Cisco Post-Warranty Support for MDS 9216 Enterprise Package (1 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: Feature #7011.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7010.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Software Packages must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#7017) Cisco Post-Warranty Support for MDS 9216 Fabric Manager Package (1 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: Feature #7016.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7015.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Software Packages must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#7032) Cisco Post-Warranty Support for MDS 9216 Mainframe Package (1 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: Feature #7031.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7030.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Software Packages must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#7022) Cisco Post-Warranty Support for MDS 9500 Enterprise Package (1 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: Four.
- Prerequisites: Feature #7021.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7020.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Software Packages must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#7027) Cisco Post-Warranty Support for MDS 9500 Fabric Manager Package (1 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: Two.
- Prerequisites: Feature #7026.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7025.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Software Packages must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#7037) Cisco Post-Warranty Support for MDS 9500 Mainframe Package (1 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: Four.
- Prerequisites: Feature #7036.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7035.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders, base
Hardware and Software Packages must both be under current warranty or
post-warranty support.
- Cable Order: None.
(#7113) Cisco Post-Warranty Support for MDS 9216 Enterprise Package (2 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: Feature #7011.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7010.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
base Hardware and Software Packages must both be under current
warranty or post-warranty support.
- Cable Order: None.
(#7114) Cisco Post-Warranty Support for MDS 9216 Enterprise Package (3 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: Feature #7011.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7010.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#7115) Cisco Post-Warranty Support for MDS 9216 Enterprise Package (4 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: Feature #7011.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7010.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#7118) Cisco Post-Warranty Support for MDS 9216 Fabric Manager Package (2 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: Feature #7016.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7015.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
base Hardware and Software Packages must both be under current
warranty or post-warranty support.
- Cable Order: None.
(#7119) Cisco Post-Warranty Support for MDS 9216 Fabric Manager Package (3 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: Feature #7016.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7015.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#7120) Cisco Post-Warranty Support for MDS 9216 Fabric Manager Package (4 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: Feature #7016.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7015.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#7123) Cisco Post-Warranty Support for MDS 9500 Enterprise Package (2 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: Two.
- Prerequisites: Feature #7021.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7020.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
base Hardware and Software Packages must both be under current
warranty or post-warranty support.
- Cable Order: None.
(#7124) Cisco Post-Warranty Support for MDS 9500 Enterprise Package (3 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: One.
- Prerequisites: Feature #7021.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7020.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#7125) Cisco Post-Warranty Support for MDS 9500 Enterprise Package (4 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: One.
- Prerequisites: Feature #7021.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7020.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#7128) Cisco Post-Warranty Support for MDS 9500 Fabric Manager Package (2 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: Two.
- Prerequisites: Feature #7026.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7025.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
base Hardware and Software Packages must both be under current
warranty or post-warranty support.
- Cable Order: None.
(#7129) Cisco Post-Warranty Support for MDS 9500 Fabric Manager Package (3 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: One.
- Prerequisites: Feature #7026.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7025.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#7130) Cisco Post-Warranty Support for MDS 9500 Fabric Manager Package (4 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: One.
- Prerequisites: Feature #7026.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7025.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#7133) Cisco Post-Warranty Support for MDS 9216 Mainframe Package (2 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: Two.
- Prerequisites: Feature #7031.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7030.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
base Hardware and Software Packages must both be under current
warranty or post-warranty support.
- Cable Order: None.
(#7134) Cisco Post-Warranty Support for MDS 9216 Mainframe Package (3 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: Feature #7031.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7030.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#7135) Cisco Post-Warranty Support for MDS 9216 Mainframe Package (4 Year)
- Minimum Number of Features per 2062-D01: None.
- Maximum Number of Features per 2062-D01: One.
- Prerequisites: Feature #7031.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7030.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#7138) Cisco Post-Warranty Support for MDS 9500 Mainframe Package (2 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: Two.
- Prerequisites: Feature #7036.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7035.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES. For MES orders,
base Hardware and Software Packages must both be under current
warranty or post-warranty support.
- Cable Order: None.
(#7139) Cisco Post-Warranty Support for MDS 9500 Mainframe Package (3 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: One.
- Prerequisites: Feature #7036.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7035.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both Plant and MES.
- Cable Order: None.
(#7140) Cisco Post-Warranty Support for MDS 9500 Mainframe Package (4 Year)
- Minimum Number of Features per 2062-D04/T04/D07/T07: None.
- Maximum Number of Features per 2062-D04/T04/D07/T07: One.
- Prerequisites: Feature #7036.
- Corequisites: On initial orders (IPO) you must have matching number
of years post-warranty support on base Hardware and Software Packages.
- Compatibility Conflicts: Not available with feature #7035.
- Compatibility Conflicts: Maximum years of post-warranty support is
four years.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
Not available.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
None.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|
|