Cisco MDS 9120 and MDS 9140 Multilayer Fabric Switches

The MDS 9120 (IBM 2061-020) is a 20-port Fibre Channel switch packaged in a 1 RU enclosure, supporting front-to-back airflow, is designed with 4 full-rate ports, 16 oversubscribed ports, and redundant hot-swappable power supplies and fans. The MDS 9140 (IBM 2061-040) is the 40-port version, providing 8 full-rate ports and 32 oversubscribed ports. Beside the port count, no functional differences are present between the two products, therefore this section refers to both, unless explicitly stated.

MDS 9120/9140 (2061-020/040) switches are designed to provide the same services and capabilities as the MDS 9500 series with the exception of supervisor (hardware controller) high-availability and support for non-Fibre channel data transports. Features include:

• Hardware-enabled Virtual SANs (VSANs) help support multiple workgroups on a single physical infrastructure.

• Fabric-wide monitoring with intelligent diagnostics and troubleshooting tools, such as SPAN, Port Analyzer Adapter, FC-Trace and FC-Ping.

• Port Channels promote high performance and resilience of ISLs.

• Fabric switch availability, with redundant hot-swappable power supplies and fans, software process restartability.

• Comprehensive security framework includes VSANs, hardware-based zoning, role based access control, SSH, SNMPv3, Radius support/

• Easy-to-use, intuitive device and fabric management tools.

Cisco MDS 9000 Enterprise Packages

The Cisco MDS 9000 Enterprise Packages, designed to provide enhanced security and management features, bundled for convenience and added flexibility. The Cisco MDS 9000 Enterprise Package includes the following capabilities:

• LUN Zoning
• Read-only zones
• Port lockdown

Cisco MDS 9000 Fabric Manager Packages

The Cisco MDS 9000 Fabric Manager Server Packages extend Cisco Fabric Manager by helping provide historical performance data collection for network traffic hot-spot analysis, centralized management services and support for advanced application integration.

Cisco CWDM Solution SFP Transceivers

The CWDM wavelength-specific SFPs (#5311-#5318) each operate at one of eight wavelengths and may be configured into any available port on the MDS 9120 or 9140. When customers require addition of CWDM mux capability, the Cisco Eight Channel CWDM Mux (2062-CW1) may be ordered separately, to transmit multiple wavelengths over a shared extended distance fiber optic cable.

Fiber Optic Transceivers

Fibre Channel ports on the IBM 2061-020/040 may be configured to accept Short Wave SFP and/or Long Wave SFP optic transceivers. However, when ordering the IBM 2061-020/-040, a minimum of 16 Fiber Channel ports must be populated with SFP optic transceivers.

Fiber Channel optic cables and cable couplers

A fiber optic cable is required for attaching the Cisco MDS 9000 family switch or director to host computer system adapters, or other Fibre Channel storage area components. The fiber optic cable can be customer supplied, and must meet specifications defined by Cisco Systems. Where a limited distance connection exists, fiber optic cables can be ordered with Cisco products from IBM with the following features:

Cisco Enhanced Warranty Upgrade and Post-Warranty Support for MDS 9120/9140 (2061-020/-040)

Cisco enhanced warranty upgrade and post-warranty support features are available for the Cisco MDS 9000 products purchased through IBM or IBM Business Partners, under the IBM 2061 machine type.

The warranty for the Cisco MDS 9000 products purchased through IBM or IBM Business Partners, under the IBM 2061 machine type, is one year, 8x5, Next-Business-Day (NBD) Customer-Replaceable Unit (CRU) Cisco Warranty. Optionally at initial plant order, the customer may purchase an enhanced warranty upgrade which provides one year 24x7 Same Day On-Site Cisco Warranty.

The Cisco post-warranty support features are available for both plant and field install, and provide the ability to establish either:

• Up to four years, 8x5 NBD CRU Cisco support beyond the first-year warranty period, or
• Up to four years 24x7 Same Day On-Site Cisco support beyond the first-year warranty period.

Cisco Post-Warranty Support Features for MDS 9000 Software Packages

Cisco post-warranty support features, resold by IBM, available for each of the IBM 2061 Fabric Switches, are also available for optional features such as the MDS Enterprise, and MDS Fabric Manager Server Packages. In order for Cisco post-warranty support to be in effect on MDS 9000 software features, the base Switch or Director model must first be under Cisco warranty or Cisco post-warranty support. The Cisco post-warranty support features are available at initial plant order and field install, and provide the ability to establish an additional year of Cisco support, beyond the first-year warranty period.

See Special Features section for details.

Cisco enhanced warranty and post-warranty support features are subject to Cisco's standard Warranty and Post-Warranty Support Contract terms and conditions included in the packaging with the eligible products. Some limitations apply.

When ordering Cisco post-warranty features for field installation (MES), the customer must sign the Cisco Master Service Agreement (MSA). The MSA is required prior to IBM being able to order Cisco post-warranty support as MES.

Note: SALES REPRESENTATIVES MUST CHECK SERVICE LEVEL AVAILABILITY PRIOR TO SELLING A 24x7x4 SUPPORT CONTRACT FOR THIS PRODUCT. REFER TO WEBSITE PROVIDED ON E-CONFIG SALES PAGE FOR IBM 2061.

Power Cords for Cisco Storage Switch MDS 9120 / 9140

You must specify the type of power cord when ordering the Cisco Storage Switch MDS 9120 / 9140 (2061-020/-040) from IBM. Specify the required country-specific feature number (#9241-#9248) in your initial order (IPO).

Additional Information

For the most current and complete description of Cisco Systems MDS 9000 family of storage networking products, refer to:

http://www.cisco.com/go/ibm/storage

For a complete list of hardware and software requirements, heterogeneous cross-functional product requirements, support statements, prerequisites and/or product dependencies, refer to:

http://www.ibm.com/storage/cisco

For specific configuration support dates and other details on availability, server models, operating system levels, and storage attachment capabilities, visit:

http://www.ibm.com/storage/cisco

Support for some configurations may not be available on the initial planned availability date.
Back to top
 

Models

Model Summary Matrix Models Number of Ports (Min/Max) Port Increments SW LW PA1 1 / 1 N/A Y Y 020 4 / 20 1 Y Y 040 4 / 40 1 Y Y Customer Setup (CSU) Yes. Devices Supported For specific configuration support dates and other details on availability, server models, operating system levels, and storage attachment capabilities, please consult: http://www.ibm.com/storage/cisco Model Conversions None. Back to top   Technical Description Physical Specifications Operating Environment Limitations Hardware Requirements Software Requirements Cisco MDS 9120 (2061-020) Multilayer Fabric Switch The MDS 9120 is a 20-port Fibre Channel switch packaged in a 1 RU enclosure, supporting front-to-back airflow, designed with 4 full rate ports, 16 oversubscribed ports, and redundant hot-swappable power supplies and fans. Cisco MDS 9140 (2061-040) Multilayer Fabric Switch The MDS 9140 is the 40-port version, providing 8 full rate ports and 32 oversubscribed ports. Beside the port count, no functional differences a represent between the two products, therefore this section refers to both, unless explicitly stated. MDS 9120/9140 (2061-020/-040) is designed to provide the same services and capabilities as the MDS 9500 series with the exception of supervisor HA and support for non-Fibre channel data transports: Hardware-enabled Virtual SANs (VSANs) helps support multiple workgroups on a single physical infrastructure Fabric-wide monitoring with intelligent diagnostics and troubleshooting tools, such as SPAN, Port Analyzer Adapter, FC-Trace and FC-Ping Port Channels for high performance and resilience of ISLs Fabric switch availability with redundant hot-swappable power supplies and fans, software process restartability Comprehensive security framework including VSANs, hardware-based zoning, role based access control, SSH, SNMPv3, Radius support Easy-to-use, intuitive device and fabric management tools Cisco Port Analyzer Adapter The 2061 Cisco Port Analyzer Adapter (2061-PA1) is a portable diagnostics tool, which plugs into an available Fibre Channel port on the MDS 9000 family. The Port Analyzer Adapter captures Fibre Channel protocol traffic, transmits this to a nearby management server for display and analysis. Physical Specifications For information on technical specifications of Cisco products, including operating environment and physical specifications, refer to: http://www.cisco.com/go/ibm/storage Operating Environment The MDS 9120/9140 Switches are installable in an industry-standard EIA Telco rack, meeting requirements defined in the recommended installation procedures. For information on technical specifications of Cisco products, including operating environment, recommended installation procedures, and physical specifications, refer to: http://www.cisco.com/go/ibm/storage Limitations Not applicable. Hardware Requirements For a complete list of hardware requirements, cross-product requirements, prerequisites, and/or product dependencies, refer to: http://www.cisco.com/go/ibm/storage Software Requirements For a complete list of software requirements, cross-product requirements, prerequisites, and/or product dependencies, refer to: http://www.cisco.com/go/ibm/storage Back to top   Publications Technical documentation for Cisco products is provided by Cisco Systems. Back to top   Features -- Specify/Special/Exchange No Charge Specify Codes Special Feature Codes -- Chargeable Feature Exchanges No Charge Specify Codes FLD PLT on on Description Machine Model Feature Min Max ly ly ---------------------------- ------- ----- ------- --- --- --- --- Cisco MDS 9120 Multilayer 2061 020 Fabric Switch Cabinet Jumper Power Cord 250 VAC 16A, 9220 0 2 N Y C14-C15 Conn AC Power Cord North America 9241 2 2 N Y AC Power Cord (Australia) 9242 2 2 N Y AC Power Cord (Europe) 9243 2 2 N Y AC Power Cord CD12 (Italy) 9244 2 2 N Y AC Power Cord (Argentina) 9245 2 2 N Y AC Power Cord (UK) 9246 2 2 N Y AC Power Cord (South Africa) 9247 2 2 N Y AC Power Cord (Switzerland) 9248 2 2 N Y Cisco Base HW Warranty, 8x5 NBD (First Year) 9910 0 1 N Y Cisco MDS 9140 Multilayer 2061 040 Fabric Switch Cabinet Jumper Power Cord 250 VAC 16A, 9220 0 2 N Y C14-C15 Conn AC Power Cord North America 9241 2 2 N Y AC Power Cord (Australia) 9242 2 2 N Y AC Power Cord (Europe) 9243 2 2 N Y AC Power Cord CD12 (Italy) 9244 2 2 N Y AC Power Cord (Argentina) 9245 2 2 N Y AC Power Cord (UK) 9246 2 2 N Y AC Power Cord (South Africa) 9247 2 2 N Y AC Power Cord (Switzerland) 9248 2 2 N Y Cisco Base HW Warranty, 8x5 NBD (First Year) 9910 0 1 N Y Cisco Port Analyzer Adapter 2061 PA1 Power Cord, 250 V ac 2.5A, C7 cpl, Argentina 9231 1 1 N Y Power Cord, 250 V ac 2.5A, C7 cpl, BS 1363 plug, 9232 1 1 N Y Australia Power Cord, 250 V ac 2.5A, C7 cpl, EN 50075, E.U. 9233 1 1 N Y Power Cord, 125 V ac 3A, C7 cpl, NEMA 1-15P, U.S. 9234 1 1 N Y Power Cord, 250 V ac 2.5A, C7 cpl, AS 3112, U.K. 9235 1 1 N Y Power Cord, 250 V ac 2.5A, C7 cpl, Korea 9236 1 1 N Y Cisco MDS 9120 and MDS 9140 Multilayer Fabric Switch Power Cords for Cisco MDS 9120/9140 Switch Summary: You must specify the type of power cord when ordering the Cisco MDS 9120/9140 Fabric Switch IBM. Specify the required country specific feature number (#9220-#9248) in your initial order (IPO). (#9220) Cabinet Jumper Power Cord, 250 VAC 16A, C14-C15 Connector The following applies to all power cords for the 2062-D01: Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Min/Max quantities are for all power cords, #9220 through #9248. Customer Setup: Yes. Limitations: None. Field Installable: No, IPO only Cable Order: None. (#9241) AC Power Cord North America (#9242) AC Power Cord (Australia) (#9243) AC Power Cord (Europe) (#9244) AC Power Cord CD12 (Italy) (#9245) AC Power Cord (Argentina) (#9246) AC Power Cord (UK) (#9247) AC Power Cord (South Africa) (#9248) AC Power Cord (Switzerland) Minimum Number of Features per 2061-020: Two. Maximum Number of Features per 2061-020: Two. Minimum Number of Features per 2061-040: Two. Maximum Number of Features per 2061-040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: None. Customer Setup: Yes. Limitations: None. Field Installable: No, IPO only Cable Order: None. Power Cords for Cisco Port Anaylzer Adapter (IBM 2061-PA1) Summary: You must specify the type of power cord when ordering the Cisco Port Anaylzer Adapter (IBM 2061-PA1) from IBM. Specify the required country specific feature number (#9231-#9236) in your initial order (IPO). (#9231) Power Cord, 250 V ac 2.5A, C7 cpl, Argentina (#9232) Power Cord, 250 V ac 2.5A, C7 cpl, BS 1363 plug, Australia (#9233) Power Cord, 250 V ac 2.5A, C7 cpl, EN 50075, E.U. (#9234) Power Cord, 125 V ac 3A, C7 cpl, NEMA 1-15P, U.S. (#9235) Power Cord, 250 V ac 2.5A, C7 cpl, AS 3112, U.K. (#9236) Power Cord, 250 V ac 2.5A, C7 cpl, Korea Minimum Number of Features per 2061-PA1: One. Maximum Number of Features per 2061-PA1: One. Prerequisites: None. Corequisites: None. Compatibility Conflicts: None. Customer Setup: Yes. Limitations: None. Field Installable: No, IPO only Cable Order: None. Cisco Base Warranty for MDS 9120/9140 (2061-020/040) Summary: The warranty for the Cisco MDS 9000 products purchased through IBM or IBM Business Partners, under the IBM 2061 machine type, is one year, 8x5, Next-Business-Day (NBD) CRU Cisco Warranty. Optionally at initial plant order, the customer may purchase an enhanced warranty upgrade which provides one year 24x7 Same Day On-Site Cisco Warranty. See Special Features section. (#9910) Cisco Base HW Warranty, 8x5 NBD (First Year) Summary: Specify this feature in your Initial Plant Order to designate the Cisco base warranty for the MDS 9120/9140 (2061-020/040). Feature #9910 is the default code, and can be deselected upon selection of #7110 for the 2061-020 or #7210 for the 2061-040. You must select either #9910 or #7110 (020)/7210 (040) in your intial order. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7110 for the 2061-020 Compatibility Conflicts: Cannot coexist with #7210 for the 2061-040 Customer Setup: Yes. Limitations: None. Field Installable: No, IPO only Cable Order: None. Special Feature Codes -- Chargeable FLD PLT on on Description Machine Model Feature Min Max ly ly ----------------------------- ------- ----- ------- --- --- --- --- Cisco MDS 9120 Multilayer 2061 020 Fabric Switch MDS 9000 Enterprise Package Bundle 4010 0 1 N N MDS 9000 Enterprise Package 4011 0 1 N N Cisco Post-Warr Supp 1 Yr Enterprise Pkg 4012 0 4 N N Cisco Post-Warr Supp 2 Yr Enterprise Pkg 4013 0 2 N N Cisco Post-Warr Supp 3 Yr Enterprise Pkg 4014 0 1 N N Cisco Post-Warr Supp 4 Yr Enterprise Pkg 4015 0 1 N Y MDS 9000 Fabric Manager Server Package Bundle 4110 0 1 N N MDS 9000 Fabric Manager Server Pacakge 4111 0 1 N N Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg 4112 0 4 N N Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg 4113 0 2 N N Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg 4114 0 1 N N Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg 4115 0 1 N Y Tri-Rate SW SFP Transceiver 5210 0 20 N N Tri-Rate LW SFP Transceiver 5220 0 20 N N FC Port SW SFP Transceiver 5230 0 20 N N FC Port LW SFP Transceiver 5240 0 20 N N 1470 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5311 0 2 N N 1490 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5312 0 2 N N 1510 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5313 0 2 N N 1530 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5314 0 2 N N 1550 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5315 0 2 N N 1570 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5316 0 2 N N 1590 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5317 0 2 N N 1610 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5318 0 2 N N 1 m LC/LC Fiber Cable (multimode) 5601 0 20 N N 5 m LC/LC Fiber Cable (multimode) 5605 0 20 N N 25 m LC/LC Fiber Cable (multimode) 5625 0 20 N N SC/LC Coupling Cable (8 inch) 5701 0 20 N N LC/SC Coupling Cable (2 meter) 5702 0 20 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (1 Yr) 7101 0 4 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (2 Yr) 7102 0 2 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (3 Yr) 7103 0 1 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (4 Yr) 7104 0 1 N Y Cisco Base HW Warranty, 24x7 On-Site (First Year) 7110 0 1 N Y Cisco Post-Warr Supp 24x7 IOR (1 Yr) 7111 0 4 N N Cisco Post-Warr Supp 24x7 IOR (2 Yr) 7112 0 2 N N Cisco Post-Warr Supp 24x7 IOR (3 Yr) 7113 0 1 N N Cisco Post-Warr Supp 24x7 IOR (4 Yr) 7114 0 1 N Y Cisco MDS 9120 Multilayer 2061 040 Fabric Switch MDS 9000 Enterprise Package Bundle 4010 0 1 N N MDS 9000 Enterprise Package 4011 0 1 N N Cisco Post-Warr Supp 1 Yr Enterprise Pkg 4012 0 4 N N Cisco Post-Warr Supp 2 Yr Enterprise Pkg 4013 0 2 N N Cisco Post-Warr Supp 3 Yr Enterprise Pkg 4014 0 1 N N Cisco Post-Warr Supp 4 Yr Enterprise Pkg 4015 0 1 N Y MDS 9000 Fabric Manager Server Package Bundle 4110 0 1 N N MDS 9000 Fabric Manager Server Package 4111 0 1 N N Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg 4112 0 4 N N Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg 4113 0 2 N N Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg 4114 0 1 N N Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg 4115 0 1 N Y Tri-Rate SW SFP Transceiver 5210 0 40 N N Tri-Rate LW SFP Transceiver 5220 0 40 N N FC Port SW SFP Transceiver 5230 0 40 N N FC Port LW SFP Transceiver 5240 0 40 N N 1470 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5311 0 2 N N 1490 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5312 0 2 N N 1510 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5313 0 2 N N 1530 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5314 0 2 N N 1550 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5315 0 2 N N 1570 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5316 0 2 N N 1590 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5317 0 2 N N 1610 NM CWDM Gigabit Ethernet and 1 / 2Gbps FC SFP 5318 0 2 N N 1 m LC/LC Fiber Cable (multimode) 5601 0 40 N N 5 m LC/LC Fiber Cable (multimode) 5605 0 40 N N 25 m LC/LC Fiber Cable (multimode) 5625 0 40 N N SC/LC Coupling Cable (8 inch) 5701 0 40 N N LC/SC Coupling Cable (2 meter) 5702 0 40 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (1 Yr) 7201 0 4 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (2 Yr) 7202 0 2 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (3 Yr) 7203 0 1 N N Cisco Post-Warr Supp 8x5 NBD, Parts Only (4 Yr) 7204 0 1 N Y Cisco Base HW Warranty, 24x7 On-Site (First Year) 7210 0 1 N Y Cisco Post-Warr Supp 24x7 IOR (1 Yr) 7211 0 4 N N Cisco Post-Warr Supp 24x7 IOR (2 Yr) 7212 0 2 N N Cisco Post-Warr Supp 24x7 IOR (3 Yr) 7213 0 1 N N Cisco Post-Warr Supp 24x7 IOR (4 Yr) 7214 0 1 N Y Cisco Port Analyzer Adapter 2061 PA1 Cisco Post Warr Supp 8x5 NBD, Parts Only (1 Year) 7001 0 2 N N Cisco Post Warr Supp 8x5 NBD, Parts Only (2 Year) 7002 0 1 N N   Cisco MDS 9120 and MDS 9140 (2062-020/040) Special Features Cisco MDS 9000 Enterprise Features (#4010) Cisco MDS 9000 Enterprise Package Bundle (No Longer Available as of June 24, 2005) Summary: The Cisco MDS 9000 Enterprise Package Bundle is designed to provide enhanced security and management features, bundled for convenience and added flexibility. The MDS 9000 Enterprise Package Bundle includes the following capabilities: LUN Zoning, Read-only zones, Port lockdown. The MDS 9000 Enterprise Package Bundle is structured to include the first-year software warranty plus two additional years of post-warranty support for the software package. Upon selection of the MDS 9000 Enterprise Package Bundle, customers will be required to purchase (or already own) two additional years of post-warranty support on the MDS 9000 base hardware. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: None. Corequisites for Model 020: Must have two additional years of post-warranty support on the MDS 9000 base hardware (either one of 7102 or 7112, or two each of 7101 or 7111). Corequisites for Model 040: Must have two additional years of post-warranty support on the MDS 9000 base hardware (either one of 7202 or 7212, or two each of 7201 or 7211). Compatibility Conflicts: None. Customer Setup: Yes. Limitations: All MDS 9000 Switches and Directors in the fabric must purchase and activate MDS 9000 FMS Package Bundle to enable full set of functionality. Field Installable: Yes, both IPO and MES. Cable Order: None. (#4011) Cisco MDS 9000 Enterprise Package Summary: The Cisco MDS 9000 Enterprise Package is designed to provide enhanced security and management features, packaged for convenience and added flexibility. The MDS 9000 Enterprise Package includes the following capabilities: LUN Zoning, Read-only zones, Port lockdown. The MDS 9000 Enterprise Package includes the first-year software warranty as part of the base product warranty. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Can not co-exist with feature #4010 Customer Setup: Yes. Limitations: All MDS 9000 Switches and Directors in the fabric must purchase and activate MDS 9000 Enterprise Package to enable full set of functionality. Field Installable: Yes, both IPO and MES. Cable Order: None. Cisco MDS 9000 Fabric Manager Server Packages (#4110) MDS 9000 Fabric Manager Server Package Bundle (No Longer Available as of June 24, 2005) Summary: The Cisco MDS 9000 Fabric Manager Server Bundle extends Cisco Fabric Manager by helping provide historical performance data collection for network traffic hot-spot analysis, centralized management services and support for advanced application integration. The MDS 9000 Fabric Manager Server Bundle is structured to include the first-year software warranty plus two additional years of post-warranty support for the software package. Upon selection of the MDS 9000 Fabric Manager Server Bundle, customers will be required to purchase (or already own) two additional years of post-warranty support on the MDS 9000 base hardware. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: None. Corequisites for Model 020: Must have two additional years of post-warranty support on the MDS 9000 base hardware (either one of 7102 or 7112, or two each of 7101 or 7111). Corequisites for Model 040: Must have two additional years of post-warranty support on the MDS 9000 base hardware (either one of 7202 or 7212, or two each of 7201 or 7211). Compatibility Conflicts: None. Customer Setup: Yes. Limitations: All MDS 9000 Switches and Directors in the fabric must purchase and activate MDS 9000 FMS Package Bundle to enable full set of functionality. Field Installable: Yes, both IPO and MES. Cable Order: None. (#4111) MDS 9000 Fabric Manager Server Package Summary: The Cisco MDS 9000 Fabric Manager Server Package extends Cisco Fabric Manager by helping provide historical performance data collection for network traffic hot-spot analysis, centralized management services and support for advanced application integration. The MDS 9000 Fabric Manager Server Package includes the first-year software warranty as part of the base product warranty. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Can not co-exist with feature #4110. Customer Setup: Yes. Limitations: All MDS 9000 Switches and Directors in the fabric must purchase and activate MDS 9000 FMS Package to enable full set of functionality. Field Installable: Yes, both IPO and MES. Cable Order: None. SFP Transceivers Summary: Fibre Channel ports on the IBM 2061 may be configured to accept either Short Wave SFP or Long Wave SFP optic transceivers. Fibre Channel ports can be populated with either the Tri-Rate (#5230 and #5240), or FC SFP (#5210 and #5220) Transceivers. However, when ordering the IBM 2061, a minimum of four fibre channel ports must be populated with SFP optic transceivers. Minimum quantities listed represent the number of ports available in the base configuration of the Model 020 and 040. Maximum quantities listed represent the maximum number of ports available in a fully populated Model 020 and 040. (#5210) Tri-Rate SW SFP Transceiver Summary: This feature provides a Tri-Rate (1 and 2 GB/s and Gigabit Ethernet) short wave SFP transceiver for the IBM 2061. (#5220) Tri-Rate LW SFP Transceiver Summary: This feature provides a Tri-Rate (1 and 2 GB/s and Gigabit Ethernet) long wave SFP transceiver for the IBM 2061. (#5230) FC SW SFP Transceiver Summary: This feature provides a FC short wave SFP transceiver for the IBM 2061. (#5240) FC LW SFP Transceiver Summary: This feature provides a FC long wave SFP transceiver for the IBM 2061. Minimum Number of Features per 2061-020: 4. Maximum Number of Features per 2061-020: 20. Minimum Number of Features per 2061-040: 4. Maximum Number of Features per 2061-040: 40. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Min/Max totals are quantities for features #5210, #5220, #5230 and #5240. Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. Cisco CWDM Solution SFP Transceivers Summary: The CWDM wavelength-specific SFPs (#5311-#5318) each operate at one of eight wavelengths and may be configured into any available port on the MDS 9120 or 9140. When customers require addition of CWDM mux capability, the Cisco Eight Channel CWDM Mux (2062-CW1) may be ordered separately, to transmit multiple wavelengths over a shared extended distance fiber optic cable. (#5311) 1470 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Grey Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. (#5312) 1490 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Violet Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. (#5313) 1510 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Blue Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. (#5314) 1530 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Green Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. (#5315) 1550 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Yellow Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. (#5316) 1570 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Orange Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. (#5317) 1590 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Red Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. (#5318) 1610 NM CWDM Gigabit Ethernet - 1/2Gb FC SFP - Brown Summary: This feature provides one wavelength-specific CWDM SFP. Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. Cable Order: None. Fiber Channel Cable Couplers (#5701) SC/LC Coupling Cable - 8 inch This feature provides a fiber cable coupler, multimode (50u), duplex SC (male), LC (female) which will allow you to attach an existing fiber cable with SC type connectors to a port with a LC type connector. (#5702) LC/SC Coupling Cable- 2 meter This feature provides a fiber cable coupler, multimode (50u), duplex LC (male), SC (female) which will allow you to attach an existing fiber cable with LC type connectors to a port with a SC type connector. Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: 20. Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: 40. Prerequisites: None. Corequisites: None. Compatibility Conflicts: None. Customer Setup: Yes. Limitations: None. Field Installable: Yes, both MES and IPO. Cable Order: None. Fiber Channel Optic Cables Summary. A fiber optic cable is required for attaching the Cisco MDS 9000 family switch or director to host computer system adapters, or other Fibre Channel storage area components. The fiber optic cable can be customer supplied, and must meet specifications defined by Cisco Systems. Where a limited distance connection exists, fiber optic cables can be ordered with Cisco products from IBM with the following features: (#5601) 1 m Fiber Channel Cable This feature provides a multimode optical 50.0u cable, 1.0 meters in length. (#5605) 5 m Fiber Channel Cable This feature provides a multimode optical 50.0u cable, 5.0 meters in length. (#5625) 25 m Fiber Channel Cable This feature provides a multimode optical 50.0u cable, 25.0 meters in length. Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: 20. Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: 40. Prerequisites: None. Corequisites: None. Compatibility Conflicts: None. Customer Setup: Yes. Limitations: None. Field Installable: Yes, both MES and IPO. Cable Order: None. Cisco Enhanced Warranty Upgrade and Post-Warranty Support Cisco enhanced warranty upgrade and post-warranty support features are available for the Cisco MDS 9000 products purchased through IBM or IBM Business Partners, under the IBM 2061 machine type. The warranty for the Cisco MDS 9000 products purchased through IBM or IBM Business Partners, under the IBM 2061 machine type, is one year, 8x5, Next-Business-Day (NBD) Customer-Replaceable Unit (CRU) Cisco Warranty. Optionally at initial plant order, the customer may purchase an enhanced warranty upgrade which provides one year 24x7 Same Day On-Site Cisco Warranty. The Cisco post-warranty support features are available for both plant and field install, and provide the ability to establish either: Up to four years, 8x5 NBD CRU Cisco support beyond the first-year warranty period, or Up to four years, 24x7 Same Day On-Site Cisco support beyond the first-year warranty period. Cisco enhanced warranty and post-warranty support features are subject to Cisco's standard Warranty and Post-Warranty Support Contract terms and conditions included in the packaging with the eligible products. Some limitations apply. When ordering Cisco post-warranty features for field installation (MES), the customer must sign the Cisco Master Service Agreement (MSA). The MSA is required prior to IBM being able to order Cisco post-warranty support as MES. Note: SALES REPRESENTATIVES MUST CHECK SERVICE LEVEL AVAILABILITY PRIOR TO SELLING A 24x7x4 SUPPORT CONTRACT FOR THIS PRODUCT. REFER TO WEBSITE PROVIDED ON E-CONFIG SALES PAGE FOR IBM 2061. Cisco enhanced warranty and post-warranty support optional features are orderable with the following feature numbers: Cisco MDS 9120 (2061-020): Feature Number Description ------- ------------------------------------------------- #7110 Cisco Base HW Warr Upg, 24x7 On-Site (First Year) #7101 Cisco Post-Warr Supp 8x5 NBD, CRU (1 Year) #7102 Cisco Post-Warr Supp 8x5 NBD, CRU (2 Year) #7103 Cisco Post-Warr Supp 8x5 NBD, CRU (3 Year) #7104 Cisco Post-Warr Supp 8x5 NBD, CRU (4 Year) #7111 Cisco Post-Warr Supp 24x7 On-Site (1 Year) #7112 Cisco Post-Warr Supp 24x7 On-Site (2 Year) #7113 Cisco Post-Warr Supp 24x7 On-Site (3 Year) #7114 Cisco Post-Warr Supp 24x7 On-Site (4 Year) Cisco MDS 9140 (2061-040): Feature Number Description ------- ------------------------------------------------- #7210 Cisco Base HW Warr Upg, 24x7 On-Site (First Year) #7201 Cisco Post-Warr Supp 8x5 NBD, CRU (1 Year) #7202 Cisco Post-Warr Supp 8x5 NBD, CRU (2 Year) #7203 Cisco Post-Warr Supp 8x5 NBD, CRU (3 Year) #7204 Cisco Post-Warr Supp 8x5 NBD, CRU (4 Year) #7211 Cisco Post-Warr Supp 24x7 On-Site (1 Year) #7212 Cisco Post-Warr Supp 24x7 On-Site (2 Year) #7213 Cisco Post-Warr Supp 24x7 On-Site (3 Year) #7214 Cisco Post-Warr Supp 24x7 On-Site (4 Year)   Cisco Enhanced Warranty: Optionally at initial plant order, the customer may purchase an enhanced warranty upgrade which provides one year 24x7 Same Day On-Site Cisco Warranty. Once the initial first-year warranty is upgraded to 24x7, then all post-warranty support festures must also be the equivalent (24x7) warranty level. (#7110) 24x7 Same Day On-Site Base Enhanced HW Warranty (First Year) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: One. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Post-warranty support must be at 24x7 option. Field Installable: No, IPO only. Cable Order: None. (#7210) 24x7 Same Day On-Site Base Enhanced HW Warranty (First Year) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: One. Prerequisites: None. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Post-warranty support must be at 24x7 option. Field Installable: No, IPO only. Cable Order: None. Cisco Post-Warranty Support Options: Cisco MDS 9120 (2061-020): (#7101) 8x5 Next-Day Parts Only Base HW Cisco Post Warranty Support (1 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: Four. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7110. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7102) 8x5 Next-Day Parts Only Base HW Cisco Post Warranty Support (2 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: Two. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7110. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7103) 8x5 Next-Day Parts Only Base HW Cisco Post-Warranty Support (3 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: One. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7110. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both Plant and MES. Cable Order: None. (#7104) 8x5 Next-Day Parts Only Base HW Cisco Post-Warranty Support (4 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: One. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7110. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: No, IPO only. Cable Order: None. (#7111) 24x7 On-Site Base HW Cisco Post-Warranty Support (1 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: Four. Prerequisites: Must order #7110 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7112) 24x7 On-Site Base HW Cisco Post-Warranty Support (2 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: Two. Prerequisites: Must order #7110 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7113) 24x7 On-Site Base HW Cisco Post-Warranty Support (3 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: One. Prerequisites: Must order #7110 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both Plant and MES. Cable Order: None. (#7114) 24x7 On-Site Base HW Cisco Post-Warranty Support (4 Yr) Minimum Number of Features per 2061-020: None. Maximum Number of Features per 2061-020: One. Prerequisites: Must order #7110 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: No, IPO only. Cable Order: None. Cisco MDS 9140 (2061-040): (#7201) 8x5 Next-Day Parts Only Base HW Cisco Post Warranty Support (1 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: Four. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7210. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7202) 8x5 Next-Day Parts Only Base HW Cisco Post Warranty Support (2 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: Two. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7210. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7203) 8x5 Next-Day Parts Only Base HW Cisco Post-Warranty Support (3 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: One. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7210. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both Plant and MES. Cable Order: None. (#7204) 8x5 Next-Day Parts Only Base HW Cisco Post-Warranty Support (4 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: One. Prerequisites: Must order #9910 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #7210. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: No, IPO only. Cable Order: None. (#7211) 24x7 On-Site Base HW Cisco Post-Warranty Support (1 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: Four. Prerequisites: Must order #7210 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7212) 24x7 On-Site Base HW Cisco Post-Warranty Support (2 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: Two. Prerequisites: Must order #7210 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7213) 24x7 On-Site Base HW Cisco Post-Warranty Support (3 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: One. Prerequisites: Must order #7210 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: Yes, both Plant and MES. Cable Order: None. (#7214) 24x7 On-Site Base HW Cisco Post-Warranty Support (4 Yr) Minimum Number of Features per 2061-040: None. Maximum Number of Features per 2061-040: One. Prerequisites: Must order #7210 in initial order. Corequisites: None. Compatibility Conflicts: Cannot coexist with #9910.#7212, or #7213. Customer Setup: Yes. Limitations: Maximum years of post-warranty support is four years. Field Installable: No, IPO only. Cable Order: None. Cisco Post-Warranty Support Features for MDS 9000 Software Packages Cisco post-warranty support features, resold by IBM, available for each of the IBM 2061 Fabric Switches, are also available for optional features such as the MDS Enterprise, MDS Fabric Manager Server and MDS Mainframe Packages. In order for Cisco post-warranty support to be in effect on MDS 9000 software features, the base Switch or Director model must first be under Cisco warranty or Cisco post-warranty support. The Cisco post-warranty support features are available at initial plant order and field install, and provide the ability to establish an additional year of Cisco support, beyond the first-year warranty period. Cisco post-warranty support options are subject to Cisco's standard Post-Warranty Support Contract terms and conditions included in the packaging with the eligible products. Some limitations apply. When ordering Cisco post-warranty features for field installation (MES), the customer must sign the Cisco Master Service Agreement (MSA). The MSA is required prior to IBM being able to order Cisco post-warranty support as MES. Cisco Post-Warranty Support for MDS 9000 Software Packages are orderable with the following feature numbers. Feature Number Description ------- --------------------------------------- Cisco MDS 9120 #4012 Cisco Post-Warr Supp 1 Yr Enterprise Pkg (2061-020): #4013 Cisco Post-Warr Supp 2 Yr Enterprise Pkg #4014 Cisco Post-Warr Supp 3 Yr Enterprise Pkg #4015 Cisco Post-Warr Supp 4 Yr Enterprise Pkg #4112 Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg #4113 Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg #4114 Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg #4115 Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg Cisco MDS 9140 #4012 Cisco Post-Warr Supp 1 Yr Enterprise Pkg (2061-040): #4013 Cisco Post-Warr Supp 2 Yr Enterprise Pkg #4014 Cisco Post-Warr Supp 3 Yr Enterprise Pkg #4015 Cisco Post-Warr Supp 4 Yr Enterprise Pkg #4112 Cisco Post-Warr Supp 1 Yr Fabric Mgr Pkg #4113 Cisco Post-Warr Supp 2 Yr Fabric Mgr Pkg #4114 Cisco Post-Warr Supp 3 Yr Fabric Mgr Pkg #4115 Cisco Post-Warr Supp 4 Yr Fabric Mgr Pkg   (#4012) Cisco Post-Warranty Support for MDS 9000 Enterprise Package (1 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Four Prerequisites: Must have equivlant years of post-warranty support for base hardware. Corequisites: Must order feature #4011. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4010. Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. For MES orders, base Hardware and Software Packages must both be under current warranty or post-warranty support. Cable Order: None. (#4013) Cisco Post-Warranty Support for MDS 9000 Enterprise Package (2 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: Must have equivalent years of post-warranty support for base hardware. Corequisites: Must order feature #4011. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4010. Customer Setup: Yes. Limitations: Maximum post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, base Hardware and Software Packages must both be under current warranty or post-warranty support. Cable Order: None. (#4014) Cisco Post-Warranty Support for MDS 9000 Enterprise Package (3 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: Must have equivlant years of post-warranty support for base hardware. Corequisites: Must order feature #4011. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4010. Customer Setup: Yes. Limitations: Maximum post-warranty support is four years. Field Installable: Yes, both Plant and MES. Cable Order: None. (#4015) Cisco Post-Warranty Support for MDS 9216 Enterprise Package (4 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: Must have equivalent years of post-warranty support for base hardware. Corequisites: Must order feature #4011. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4010. Customer Setup: Yes. Limitations: Maximum post-warranty support is four years. Field Installable: No, IPO only. Cable Order: None. (#4112) Cisco Post-Warranty Support for MDS 9000 Fabric Manager Package (1 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Four. Prerequisites: Must have equivalent years of post-warranty support for base hardware. Corequisites: Must order feature #4111. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4110. Customer Setup: Yes. Limitations: Maximum post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, base Hardware and Software Packages must both be under current warranty or post-warranty support. Cable Order: None. (#4113) Cisco Post-Warranty Support for MDS 9000 Fabric Manager Package (2 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: Two. Prerequisites: Must have equivalent years of post-warranty support for base hardware. Corequisites: Must order feature #4111. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4110. Customer Setup: Yes. Limitations: Maximum post-warranty support is four years. Field Installable: Yes, both IPO and MES. For MES orders, base Hardware and Software Packages must both be under current warranty or post-warranty support. Cable Order: None. (#4114) Cisco Post-Warranty Support for MDS 9000 Fabric Manager Package (3 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: Must have equivalent years of post-warranty support for base hardware. Corequisites: Must order feature #4111. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4110. Customer Setup: Yes. Limitations: Maximum post-warranty support is four years. Field Installable: Yes, both Plant and MES. Base Hardware and Software Packages must both be under current warranty or post-warranty support. Cable Order: None. (#4115) Cisco Post-Warranty Support for MDS 9000 Fabric Manager Package (4 Year) Minimum Number of Features per 2061-020/040: None. Maximum Number of Features per 2061-020/040: One. Prerequisites: Must have equivalent years of post-warranty support for base hardware. Corequisites: Must order feature #4111. Corequisites: On initial orders (IPO) you must have matching number of years post-warranty support on base Hardware and Software Packages. Compatibility Conflicts: Not available with feature #4110, #4112, #4113, and #4114. Customer Setup: Yes. Limitations: Maximum post-warranty support is four years. Field Installable: No, IPO only. Base Hardware and Software Packages must both be under current warranty or post-warranty support. Cable Order: None. Cisco Post Warranty Support for Cisco Port Analyzer (2061-PA1) (#7001) 8x5 Next-Day Parts Only Base HW Cisco Post Warranty Support (1 Yr) (No Longer Available as of October 29, 2004) Minimum Number of Features per 2061-PA1: None. Maximum Number of Features per 2061-PA1: Two. Prerequisites: None. Corequisites: None. Compatibility Conflicts: #7001 and #7002 cannot coexist. Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. (#7002) 8x5 Next-Day Parts Only Base HW Cisco Post Warranty Support (2 Yr) (No Longer Available as of October 29, 2004) Minimum Number of Features per 2061-PA1: None. Maximum Number of Features per 2061-PA1: One. Prerequisites: None. Corequisites: None. Compatibility Conflicts: #7001 and #7002 cannot coexist. Customer Setup: Yes. Limitations: None. Field Installable: Yes, both IPO and MES. For MES orders, product must be under current warranty. Cable Order: None. Feature Exchanges Not available. Back to top   Accessories None. Customer Replacement Parts None. Back to top   Machine Elements None. Back to top   Supplies None. Diskettes None. Trademarks (R), (TM), * Trademark or registered trademark of International Business Machines Corporation. ** Company, product, or service name may be a trademark or service mark of others.  © IBM Corporation 2005. Back to top