The IBM 2005 TotalStorage SAN16B-2 fabric switch Model B16 supports 4
Gbps Fibre Channel capabilities for systems that support 4 Gbps
throughput. This improved performance is designed to support storage
networking demands to help improve throughput and enhance security.
Below is a summarized listing of the SAN16B-2 features:
- 4 Gbps port-to-port throughput with auto-sensing capability for
connecting to existing 1, 2, and future 4 gigabit host servers, storage,
and switches
- Up to 16 nonblocking ports with full-duplex throughput at 1, 2, or 4
Gbps link speeds
- High availability features: automatic path routing and many
nondisruptive firmware upgrades
- Scalable ports on demand: 8-, 12-, or 16-ports to accommodate a
broad range of connectivity solutions in 1U form factor for enhanced port
density and space utilization
- Scalability from small to mid-range SAN fabric environments
- Open Fibre Channel Protocol (FCP) support
- Full compatibility with existing TotalStorage SAN b-type switches
(IBM 2005, 2109, and 3534)
- Base B16 model firmware features: Advanced Zoning and Web Tools
- Optional features: additional Port Activation, Fabric Watch,
Advanced Security, Enhanced ISL Trunking, and Performance Monitoring
- Support for 2 Gbps long wave and 4 Gbps short wave Small Form Factor
Pluggable (SFP) optic transceivers
The SAN16B-2 switch provides:
- 16 Fibre Channel ports that:
- Provide multiple simultaneous connections, each capable of throughput
speeds of 1, 2, or 4 Gb per second with a maximum latency of 2
microseconds
- Auto-sense and self-negotiate to the highest speed (1, 2, or 4
gigabits) supported by the server, storage, or switch
- Self-configure as F_ports, FL_ports, or E_ports (Full Fabric feature
required for E_ports)
- Operation with SFP optical transceivers that:
- Support up to 4 Gbps speeds with 4 Gbps short wave SFPs for distances
up to 150 meters
- Support 1 and 2 Gbps speeds with 2 Gbps long wave SFPs for distances
up to 10 km
- Can be used in any combination of 1, 2, or 4 Gbps short wave and long
wave SFPs
- Have increased ordering and deployment flexibility because SFPs are
not included within the base SAN16B-2 product but are ordered separately
with a minimum order of 8 SFPs required with the initial model B16 switch
purchase, and additionally in increments of four SFPs, up to a total of
16 SFPs
- 1U form factor designed to improve port density and rack space
utilization. The SAN16B-2 fabric switch can also be ordered with
country-specific power cords for tabletop use.
- Scalable ports on demand (8-, 12-, or 16-ports) to accommodate a
broad range of connectivity solutions for a wide variety of host and
storage types (optional Port Activation feature available for upgrade to
12 and 16 ports).
- Compatibility with IBM TotalStorage SAN b-type switch family (IBM
2005, 2109, and 3534).
- Auto Fabric discovery that allows external host and storage systems
to discover other supported SAN-enabled systems that are connected to the
fabric.
- Fabric Services such as Advanced Zoning and Web Tools are included in
the base.
Optional features
B16 4-Port Activation (#7515)
- Enables upgrade from 8-to 12-to 16-ports
- You may optionally purchase port activation for ports eight to eleven
(first four-port increment), and ports twelve to fifteen (second four-
port increment).
B16 Full Fabric Activation (#7450/#7451)
Full Fabric Activation is required to enable E_Ports. The switch, by
default, cannot be connected to another switch until Full Fabric is
installed. Without the license, the switch can be directly connected to
hosts and storage devices. Full Fabric is a prerequisite to Advanced
Security Activation and Performance Bundle Activation.
B16 Fabric Watch (#7550)
Fabric Watch is designed to enable real-time proactive awareness of
the health, performance, and security of each switch. It automatically
alerts network managers to problems and helps avoid costly failures by
providing:
- Real-time tracking of numerous fabric and switch elements
- Automatic event notifications when switch and fabric elements exceed
thresholds
- Security, availability, and congestion monitoring thresholds and
alerts
B16/B32 Advanced Security Activation (#7554)
Advanced Security Activation is designed to enable policy-based
security mechanisms integrated within Fabric Operating System V2.6, and
later. To enable advanced security capabilities, all switches within the
IBM SAN Switch Fabric must be configured with their respective Fabric
operating system version (2.6 or later) before activating the Advanced
Security feature license key. When activated across the IBM SAN Switch
Fabric, the Advanced Security Activation feature is designed to support
the following security capabilities:
- Centralized security management (trusted switches)
- Fabric-wide security policies to control access
- Port-level access control
- Switch-level access control
- Management access controls (Telnet, SNMP, HTTP, and API)
- Encryption of management data such as passwords
- Strong and nonreputable authentication between switches
B16/B32 Performance Bundle Activation-Plant (#7555)
Performance Bundle Activation is plant order only and supports both
Enhanced Inter-Switch Link (ISL) Trunking and Performance Monitoring
capabilities.
Performance Monitoring helps identify end-to-end bandwidth usage by
host/target pairs and is designed to provide information for capacity
planning.
Trunking is designed to enable Fibre Channel packets to be efficiently
distributed across multiple Inter-Switch connections (links) between two
SAN b-type fabric switches, while preserving in-order delivery. Both SAN
b-type fabric switches must have ISL Trunking activated.
Enhanced ISL Trunking is supported between two SAN16B-2, SAN32B-2, or
SAN256B 4 Gbps models and enables Fibre Channel packets to be distributed
across up to eight 4 Gbps-capable ISLs for a combined bandwidth of up to
32 Gbps. When connecting the 4 Gbps-capable models to legacy 2
Gbps-capable b-type fabric switch models, ISL Trunking is supported with
link speeds operational at 2 Gbps and Fibre Channel packets distributed
across up to four ISLs for a combined bandwidth of up to 8 Gbps. Full
Fabric Activation (#7450 or #7451) is required for ISL ISL support with
the B16 Performance Bundle Activation.
B16/B32 Performance Monitoring Activation-Field (#7556)
Performance Monitoring Activation-Field is field order only and helps
to identify end-to-end bandwidth usage by host/target pairs and is
designed to provide information for capacity planning.
B16/B32 Enhanced Trunking Activation-Field (#7557)
Enhanced ISL Trunking Activation is field order only.
Trunking is designed to enable Fibre Channel packets to be efficiently
distributed across multiple Inter-Switch connections (links) between two
SAN b-type fabric switches, while preserving in-order delivery. Both SAN
b-type fabric switches must have ISL Trunking activated.
Enhanced ISL Trunking is supported between two SAN16B-2, SAN32B-2, or
SAN256B 4 Gbps models and enables Fibre Channel packets to be distributed
across up to eight 4 Gbps-capable ISLs for a combined bandwidth of up to
32 Gbps. When connecting the 4 Gbps-capable B16 model to legacy 2
Gbps-capable b-type fabric switch models, ISL Trunking is supported with
link speeds operational at 2 Gbps and Fibre Channel packets distributed
across up to four ISLs for a combined bandwidth of up to 8 Gbps.
Supported servers and storage systems
The IBM TotalStorage SAN16B-2 fabric switch is designed to support
Fibre Channel connectivity for the following:
Servers
- IBM eServer pSeries and selected RS/6000 servers
- IBM eServer iSeries and selected AS/400 servers
- IBM eServer xSeries and selected Netfinity servers
- Other Intel-based servers with Linux, Microsoft Windows 2000, or
Windows 2003
- Selected Sun and HP servers
Storage software
- IBM TotalStorage SAN Volume Controller (SVC)
- IBM TotalStorage SAN File System (SFS)
Storage systems
- IBM TotalStorage DS8000
- IBM TotalStorage DS6000
- IBM TotalStorage DS4000
- IBM TotalStorage Enterprise Storage Server
- IBM TotalStorage FAStT Family of Storage Servers
- IBM TotalStorage 3580, 3588, 3590, and 3592 Tape Drives
- IBM TotalStorage 3494, 3582, 3583, and 3584 Tape Libraries
- IBM TotalStorage 3581 Tape Autoloader
- IBM TotalStorage 3584 High Availability Frame Model HA1
- Other selected storage systems
For specific support dates, configuration options, server models,
operating systems levels, attachment capabilities, and throughput
connectivitvy speeds, visit:
- http://www.ibm.com/totalstorage/san/b-type
Accessibility by people with disabilities
For hardware offerings
The following features support use by people with disabilities:
- Ports and connectors support connection of industry-standard devices.
Section 508 of the U.S. Rehabilitation Act
The IBM TotalStorage SAN16B-2 fabric switch is capable as of August
26, 2005, when used in accordance with IBM's associated documentation, of
satisfying the applicable requirements of Section 508 of the
Rehabilitation Act, provided that any assistive technology used with the
product properly interoperates with it. A U.S. Section 508 Voluntary
Product Accessibility Template (VPAT) can be requested via IBM's Web site
at:
- http://www-3.ibm.com/able/product_accessibility/index.html
Back to top
Models
|
Model Summary Matrix
Model |
FC Ports |
Transceivers |
B16 |
16 |
None in Base |
Customer Setup (CSU)
Yes.
Devices Supported
Specific details on supported devices: storage products
attachability, SAN connectivity products, and configuration options are
available on the Web at:
- http://www.ibm.com/totalstorage/san/b-type
Model Conversions
None.
Back to top
Technical Description
|
The IBM TotalStorage SAN16B-2 (2005-B16) provides a 1U rack mount
fabric switch, designed to provide Ports on Demand scaleability with 8-,
12-or 16- ports, with each port capable of throughput speeds of 1, 2, or
4 Gbps, and maximum latency of 2 microseconds. Additionally, each port
offers auto sensing and self-negotiation to the highest speed (1, 2, or 4
Gbps) supported by the attached server, storage, or switch, as well as
self-configuration as F_ports, FL_ports, or E_ports.
The base function of the SAN16B-2 fabric switch includes Fibre Channel
fabric services, Advanced Zoning, Web Tools, as well as high-availability
design with redundant automatic path routing, and many nondisruptive
firmware upgrades.
The SAN16B-2 fabric switch comes with the first eight ports enabled in
the base, and does not include SFPs within the base product. Short wave
and/or long wave SFPs must be ordered separately, with a minimum order of
8 SFPs required on initial purchase. Customers may purchase up to two
additional port activation optional features, for a total of 12-ports, or
16-ports enabled. Short wave and/or long wave SFPs must be separately
ordered for each of the enabled ports upon activation.
The SAN16B-2 fabric switch supports operation with Small form-factor
pluggable (SFP) optical transceivers. Operation with 4 Gbps capable
short wave SFPs provides distances up to 150 meters. Operation with 2
Gbps capable long wave SFPs provides distances up to 10 kilometers.
The SAN16B-2 fabric switch supports compatibility with IBM
TotalStorage SAN b-type switch family (IBM 2005, 2109 and 3534).
The IBM TotalStorage SAN16B-2 fabric switch (2005-B16) can be
configured for either rack-mount or tabletop use. For tabletop use, you
must order the required country-specific power cords.
Enclosure: 2005-B16 (1U), 19-in.-EIA compliant, with non-port to port
airflow.
- Height: 4.29 cm (1.69 in)
- Width: 42.85 cm (16.87 in)
- Depth: 30.73 cm (12.10 in)
- System Weight: 3.99 kg (8.8 lb) without media
To support installability and serviceability in non-IBM industry-
standard racks, review the installation planning information for any
product-specific installation requirements.
- Temperature:
- -Operating: -10 to 40 degrees C (14 to 104 degrees F)
- -Non-operating: -50 to 100 degrees C (-58 to 212 degrees F)
- Humidity operating: 20% to 85%, non-condensing at 40 C (104 F)
- Non-operating: 10% to 85%, non-condensing at 70 C (158 F)
- Operating altitude: Up to 3,000 m (9,800 ft)
- Storage altitude: Up to 12km (32,200)
- Operating Shock: 20G, 6ms half-sine
- Non-operating Shock: 15G, 12-18 ms trapezoid
- Vibration operating: 0.5 g sine, 0.4 grms random, 5 to 500 Hz
- Non-operating: 2.0 g sine, 1.1 grms random 5 to 500 Hz
- Airflow high-speed: 37 CFM
- Airflow low-speed (65% speed): 18 CFM cu. ft./min.
- Noise goal: < 53 dB
- ac input nominal: 100 to 240 V ac, 2.0 A
- Frequency: 47 to 63 Hz
- Power consumption: 54 Nominal, 66W maximum
- EMC conformance:
- CFR 47 Subpart B of Part 15 of the FCC Rules, Class A level
- CISPR22 Class A
- EN55022 Class A
- VCCI Class A ITE
- AS/NZS 3548 Class A
- CNS 13438 Class A
- EMC Directive (89/336/EEC) for CE Marking in European Union
- Product safety/Country testing/Certification:
- Underwriters Laboratories, UL60950
- Canadian Standards Association, CSA60950
- TUV Rheinland of North America, EN60950
- Nemko, EN60950
- Low Voltage Directive (73/23/EEC) for CE Marking in European Union
Not applicable.
Specific details on supported operating systems, servers, and devices,
storage products attachability, SAN connectivity products, and
configuration options are available at:
- http://www.ibm.com/totalstorage/san/b-type
Specific details on supported operating system releases are available
at:
- http://www.ibm.com/totalstorage/san/b-type
Back to top
Publications
|
The following publications are shipped with the product:
Order
Title Number
----------------------------------------- ---------
IBM TotalStorage SANB16-2 Installation, GC26-7753
Service, and User's Guide
IBM eServer Translated Safety Notices G229-9054
IBM TotalStorage SAN b-type 2005 Statement GC26-7754
of Limited Warranty
Additional copies of individual publications are available on the
Internet at:
- http://www.ibm.com/totalstorage/san/b-type
Back to top
Features -- Specify/Special/Exchange
|
Description Feature
--------------------------------------------------------- -------
- Country Specific Desktop Power Cord 9205
Power Cords for Non-rack-mount Install (#9205):
- Power Cord 125V, 10A, 2.8 m (Group 1) 9800
United States, Canada, Antigua, St. Lucia,
St. Vincent, Dominica, Grenadines, Grenada, Aruba,
Bahamas, Barbados, Belize, Bermuda, Bolivia, Cayman
Islands, Colombia, Costa Rica, Dominican Republic,
El Salvador, Ecuador, Guatemala, Guyana, Haiti,
Honduras, Jamaica, Mexico, Panama, Peru, Suriname,
Trinidad, Venezuela, Brazil, Japan, Korea, Nicaragua,
Philippines, Taiwan, Vietnam, Albania, Eritrea,
Saudi Arabia.
- Power Cord 250V, 10A, 2.8 m (Group 2) 9820
Afghanistan, Netherlands Antilles, French Polynesia,
Guinea, Indonesia, Armenia, Latvia, Angola, Austria,
Belgium, Luxembourg, Belarus, Bosnia, Botswana,
Bulgaria, Camaroon, Central Africa Republic,
Czech Republic, Congo, Egypt, Finland, France,
Germany, Greece, Hungary, Iceland, Kazakhstan,
Kirghizstan, Lebanon, Liberia, Macedonia, Mali,
Mauritania, Moldavia, Morocco, Mozambique,
Netherlands, Norway, Poland, Portugal, Romania,
Rwanda, Sao Tome and Principe, Senegal, Serbia,
Slovenia, Slovakia, Spain, Sudan, Swaziland, Sweden,
Syria, Arab Republic, Tunisia, Turkey, Ukraine,
Russia, Uzbekistan, Zaire, Zimbabwe, Burundi,
Cape Verde Islands, Estonia, Lesotho, Liechtenstein,
Republic of Djibouti.
- Power Cord 250V, 10A, 2.8 m (Group 3) 9825
Abu Dhabi, Brunei, Fiji, Hong Kong, Macao,
Malaysia, Singapore, Bahrain, Cyprus, Gambia,
Ghana, Iraq, Ireland, Jordan, Kenya, Kuwait,
Malawi, Nepal, North Yemen, Nigeria, Oman, Qatar,
Sierra Leone, Tanzania, Uganda, United Arab Emirites,
United Kingdom, Zambia.
- Power Cord 250V, 10A, 2.8 m (Group 4) 9829
Bangladesh, Myanmar, Sri Lanka, Pakistan,
South Africa, India.
- Power Cord 250V, 10A, 2.8 m (Group 5) 9830
Chile, Ethiopia, Italy, Libya, Malta,
Somalia.
- Power Cord 250V, 10A, 2.8 m Denmark 9821
- Power Cord 250V, 10A, 2.8 m Israel 9827
- Power Cord 250V, 10A, 2.8 m Switzerland 9828
- Power Cord 250V, 10A, 2.8 m Australia, 9831
New Zealand
- Power Cord 250V, 10A, 2.8 m Thailand 9833
- Power Cord 250V, 10A, 2.8 m Uruguay, Argentina, 9834
Paraguay
- Power Cord 250V, 6A, 2.8 m Peoples Republic 9840
of China
- Power Cord 125V, 10A, 1.8 m U.S./Chicago 9986
(#9205) Country Specific Desktop Power Cord
This feature will designate the 2005-B16 for a non-rack, desktop usage.
To designate the country specific power cord, you must order the
specify feature number, such as SC 98xx.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: None.
- Corequisites: Requires Power Cord with Specify Codes #9800-#9986.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, Initial Plant Order only.
- Cable Order: None.
Power Cords for non-rack Installation
You must specify the type of power cord required when ordering the
2005-B32 for non-rack, tabletop use with feature #9205.
(#9800) Power Cord
This feature supplies a 125V, 10A, 2.8 meter line cord for Group 1
countries: United States, Canada, Antigua, St. Lucia, St. Vincent,
Dominica, Grenadines, Grenada, Aruba, Bahamas, Barbados, Belize, Bermuda,
Bolivia, Cayman Islands, Colombia, Costa Rica, Dominican Republic, El
Salvador, Ecuador, Guatemala, Guyana, Haiti, Honduras, Jamaica, Mexico,
Panama, Peru, Suriname, Trinidad, Venezuela, Brazil, Japan, Korea,
Nicaragua, Philippines, Taiwan, Vietnam, Albania, Eritrea, Saudi Arabia.
(#9820) Power Cord:
This feature supplies a 250V, 10A, 2.8 meter line cord for Group 2
countries: Afganistan, Netherlands Antilles, French Polynesia Guinea,
Indonesia, Armenia, Latvia, Angola, Austria, Belgium, Luxembourg,
Belarus, Bosnia, Botswana, Bulgaria, Camaroon, Central Africa Republic,
Czech Republic, Congo, Egypt, Finland, France, Germany, Greece, Hungary,
Iceland, Kazakhstan, Kirghizstan, Lebanon, Liberia, Macedonia, Mali,
Mauritania, Moldavia, Morocco, Mozambique, Netherlands, Norway, Poland,
Portugal, Romania, Rwanda, Sao Tome and Principe, Senegal, Serbia,
Slovenia, Slovakia, Spain, Sudan, Swaziland, Sweden, Syria, Arab
Republic, Tunisia, Turkey, Ukraine, Russia, Uzbekistan, Zaire, Zimbabwe,
Burundi, Cape Verde Islands, Estonia, Lesotho, Lichtenstein, Republic of
Djibouti.
(#9825) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Group 3
countries: Abu Dhabi, Brunei, Fiji, Hong Kong, Macao, Malaysia,
Singapore, Bahrain, Cyprus, Gambia, Ghana, Iraq, Ireland, Jordan, Kenya,
Kuwait, Malawi, Nepal, North Yemen, Nigeria, Oman, Qatar, Sierra Leone,
Tanzania, Uganda, United Arab Emirites, United Kingdom, Zambia.
(#9829) Power Cord:
This feature supplies a 250V, 10A, 2.8 meter line cord for Group 4
countries: Bangladesh, Myanmar, Sri Lanka, Pakistan, South Africa,
India.
(#9830) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Group 5
countries: Chile, Ethiopia, Italy, Libya, Malta, Somalia.
(#9821) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Denmark.
(#9827) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Israel.
(#9828) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Switzerland.
(#9831) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Australia, and
New Zealand.
(#9833) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Thailand.
(#9834) Power Cord
This feature supplies a 250V, 10A, 2.8 meter line cord for Uruguay,
Argentina, and Paraguay.
(#9840) Power Cord
This feature supplies a 250V, 6A, 2.8 meter line cord for Peoples
Republic of China.
(#9986) Power Cord
This feature supplies a 125V, 10A, 1.8 meter line cord for US Chicago
usage.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: None.
- Corequisites: Feature #9205.
- Compatibility Conflicts: Must order one Specify Code #9800-#9986,
when ordering with Feature #9205.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
Description Machine Model Feature
-------------------------------------- ------- ----- -------
IBM TotalStorage SAN16B-2 2005 B16
GSA and/or Title with U.S. Government 0980
Transceivers (SFP):
- 2 Gbps LW SFP Transceiver 2220
- 2 Gbps LW SFP Transceiver 4-Pack 2224
(deletion)
- 4 Gbps SW SFP Transceiver 2410
- 4 Gbps SW SFP Transceiver 4-Pack 2414
Fiber Optic Cables:
- Fiber Cable LC/LC 1m multimode 5601
- Fiber Cable LC/LC 5m multimode 5605
- Fiber Cable LC/LC 25m multimode 5625
- SC/LC Coupling Cable 1m 5701
- LC/SC Coupling Cable 2m 5702
- 9 Micron Fibre Cable 31m, singlemode SC/LC 5720
- 9 Micron Fibre Cable 31m, singlemode LC/LC 5721
- 9 Micron Fibre Cable 2m, singlemode SC/LC 5722
- B16 4-Port Activation 7515
- B16 Full Fabric - Plant 7450
- B16 Full Fabric - Field 7451
- B16 Fabric Watch 7550
- B16/B32 Advanced Security Activation 7554
- B16/B32 Performance Bundle - Plant 7555
- B16/B32 Performance Monitoring - Field 7556
- B16/B32 Trunking Activation - Field 7557
(#0980) GSA and/or Title with U.S. Government
This feature must be added to all U.S. Government orders for the Buy
America Act. It is for administrative purposes only.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None
- Customer Setup: No.
- Limitations: None.
- Field Installable: No, Initial Plant Order only.
- Cable Order: None.
Transceivers - Small Form-Factor Pluggable (SFP)
The IBM TotalStorage SAN16B-2 (2005-B16) switch provides scalability
with ports on demand; 8-ports activated in the base, 12-, and 16-ports
enabled "on demand". Additional port activation is available with
feature #7515 in 4-port increments.
Note: The first port is designated as port zero and the last port is
designated as port fifteen.
The base switch initial activation is for 8 ports and you must select
at a minimum 8 SFP transceivers in your initial order of the 2005-B16
(Min = 2220+2410 = 8, or 2224+2414 = 2). The maximum SFP Transceivers is
16 of all types.
(#2220) 2 Gbps LW SFP Transceiver
This feature provides a 2 Gbps long wave SFP transceiver, designed to
provide Fibre Channel connections at distances up to 10 Km (6.2 miles),
while using the appropriate 9.0/125 micrometer single mode fiber optic
cable.
(#2410) 4 Gbps SW SFP Transceiver
This feature provides a 4 Gbps short wave SFP fiber optic transceiver,
allowing Fibre Channel connections of up to 150 meters while using the
appropriate 50.0/125 micrometer fiber optic cable, and distances up to 70
meters while using the appropriate 62.5/125 micrometer fiber optic cable.
Customers must verify the installation guide, quality of fiber optic
cable plant, and grade of fiber optic cable relative to applicable
industry standards.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: 16, in 4 ports increments.
- Prerequisites: None.
- Corequisites: Yes. Must have feature #7515 for each additional
4-port activation.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: Max is total of features #2220, and #2410.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Transceivers - SFP 4 Pack
(#2224) 2 Gbps LW SFP Transceiver - 4 Pack
This feature provides an additional four long wave SFP transceivers,
designed to provide Fibre Channel connections at distances up to 10 Km
(6.2 miles), while using the appropriate 9.0/125 micrometer single mode
fiber optic cable.
(#2414) 4 Gbps SW SFP Transceiver - 4 Pack
This feature provides an additional four long wave 4 Gbps short
wave SFP fiber optic transceivers, allowing Fibre Channel connections of
up to 150 meters while using the appropriate 50.0/125 micrometer fiber
optic cable, and distances up to 70 meters while using the appropriate
62.5/125 micrometer fiber optic cable. Customers must verify the
installation guide, quality of fiber optic cable plant, and grade of
fiber optic cable relative to applicable industry standards.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: Four.
- Prerequisites: None.
- Corequisites: Yes. Must have feature #7515 for each additional
4-port activation.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: Max is total of features #2224, and #2414.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Ports on demand activation
The IBM TotalStorage SAN16B-2 (2005-B16) switch provides scalability
with ports on demand; 8-ports activated in the base, 12-, and 16-ports
enabled "on demand". Additional port activation is available with
feature #7515 in 4-port increments.
Note: Port activation features do not include fiber optic transceivers.
(#7515) B16 4-Port Activation
This feature enables additional port activation for ports 8 to 11
(first four-port increment) and 12 to 15 (second four-port increment) in
the SAN16B switch.
Note: Port activation features do not include fiber optic transceivers.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: Two.
- Prerequisites: None.
- Corequisites: All available ports must be populated with SFPs.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
Fiber Optic Cables
A fiber optic cable is required for attaching the IBM TotalStorage
SAN16B-2 switch to host system adapters, or other storage area Fibre
Channel components. The cable can be customer-supplied, or ordered with
the 2005-B16 in the lengths available. The connection is an LC connector
type.
(#5601) Fiber Cable LC/LC 1m multimode
(#5605) Fiber Cable LC/LC 5m multimode
(#5625) Fiber Cable LC/LC 25m multimode
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: 16.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: Max. is total of #5601, #5605, and #5625.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#5701) SC/LC Coupling Cable 1 m
(#5702) LC/SC Coupling Cable 2 m
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: 16.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: Max. is total of #5701, #5702.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
9 Micron Fiber Optic Cables
These single mode fiber optic cable features are used to assist
configurations which include long wave SFP transceivers. Customers may
provide their own single mode fiber optic cables, or select among these
single mode fiber optic cable convenience features to connect between
devices.
(#5720) 9 Micron Fibre Cable 31m, singlemode SC/LC
(#5721) 9 Micron Fibre Cable 31m, singlemode LC/LC
(#5722) 9 Micron Fibre Cable 2m, singlemode SC/LC
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: 16.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: Max. is total of #5720, #5721, #5722.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
In many situations, the required lengths and installation of fiber
optic cables will be unique to each customer's configuration and facility
specifications. IBM Network Integration and Deployment Services, offered
by IBM Global Services, can provide assistance for these unique cabling
and installation requirements. For situations where the Fibre Channel
components and attaching subsystems are within the distances available,
there are several features available to accommodate these simple
installations.
Advanced Functions
(#7450) B16 Full Fabric - Plant
Full Fabric Activation is required to enable E_Ports. The switch by
default cannot be connected to another switch until Full Fabric is
installed. Without the license the switch can be directly connected to
hosts and storage devices.
Full Fabric is a prerequisite to Advanced Security Activation,
Enhanced Trunking and Performance Bundle Activation.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: Only one switch can be in a fabric without this
feature.
- Field Installable: No, IPO only.
- Cable Order: None.
(#7451) B16 Full Fabric - Field
Full Fabric Activation is required to enable E_Ports. The switch by
default cannot be connected to another switch until Full Fabric is
installed. Without the license the switch can be directly connected to
hosts and storage devices.
Full Fabric is a prerequisite to Advanced Security Activation,
Enhanced Trunking and Performance Bundle Activation.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: Only one switch can be in a fabric without this
feature.
- Field Installable: Yes, MES only.
- Cable Order: None.
(#7550) B16 Fabric Watch
Fabric Watch is designed to enable real-time proactive awareness of
the health, performance and security of each switch, and automatically
alert network managers to problems in order to help avoid costly
failures.
- Real-time tracking of numerous fabric and switch elements
- Automatic event notifications when switch and fabric elements exceed
thresholds
- Proactive end-to-end health, performance and security monitoring
- Security, availability, and congestion monitoring thresholds and
alerts
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7554) B16/B32 Advanced Security Activation
The IBM TotalStorage SAN16B-2 switch Advanced Security Activation
optional feature enables policy-based security mechanisms integrated
within Fabric Operating System V2.6, or later. To enable Advanced
Security capabilities, all switches within the IBM SAN Switches Fabric
must be configured with their respective Fabric OS version (2.6, or
later) before activating the Advanced Security optional feature license
key. When activated across the IBM SAN Switch Fabric, the Advanced
Security Activation feature is designed to provide the following security
capabilities.
- Centralized security management (trusted switches)
- Fabric-wide security policies to control access
- Port level access control
- Switch level access control
- Management access controls (Telnet, SNMP, HTTP, API)
- Encryption of management data such as passwords
- Strong and non-reputable authentication between switches
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: #7450 or #7451
- Corequisites: None.
- Compatibility Conflicts: None.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, both IPO and MES.
- Cable Order: None.
(#7555) B16/B32 Performance Bundle - Plant Installation
Provides both Enhanced Inter-Switch Link (ISL) Trunking and
Performance Monitoring capabilities:
Performance Monitoring helps identify end to end bandwidth usage by
host/target pairs and is designed to provide information for capacity
planning.
ISL Trunking is designed to enable Fibre Channel packets to be
efficiently distributed across multiple Inter-Switch connections (links)
between two SAN b-type fabric switches, while preserving in-order
delivery. Both SAN b-type fabric switches must have ISL Trunking
activated.
Enhanced ISL Trunking is supported between two SAN16B-2, SAN32B-2, or
SAN256B models and enables Fibre Channel packets to be distributed across
up to eight 4 Gbps capable ISLs for a combined bandwidth of up to 32
Gbps.
When connecting the 4 Gbps capable models to legacy 2 Gbps-capable
b-type fabric switch models, ISL Trunking is supported with link speeds
operational at 2 Gbps and Fibre Channel packets distributed across up to
four ISLs for a combined bandwidth of up to 8 Gbps.
Select this feature for plant installation of the Performance Bundle
in your initial order.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: #7450 or #7451
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7556 or
#7557.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: No, IPO only.
- Cable Order: None.
(#7556) B16/B32 Performance Monitor - Field
Provides Performance Monitoring capability to help identify end to end
bandwidth usage by host/target pairs and is designed to provide
information for capacity planning.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: None.
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7555.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, MES only.
- Cable Order: None.
(#7557) B16/B32 Enhanced Trunking - Field
Trunking is designed to enable FC packets to be efficiently
distributed across multiple Inter-Switch connections (links) between two
SAN b-type fabric switches, while preserving in-order delivery. Both SAN
b-type fabric switches must have ISL Trunking activated.
Enhanced ISL Trunking is supported between two SAN16B-2, SAN32B-2, or
SAN256B models and enables Fibre Channel packets to be distributed across
up to eight 4 Gbps capable ISLs for a combined bandwidth of up to 32
Gbps.
When connecting the 4 Gbps capable models to legacy 2 Gbps-capable
b-type fabric switch models, ISL Trunking is supported with link speeds
operational at 2 Gbps and Fibre Channel packets distributed across up to
four ISLs for a combined bandwidth of up to 8 Gbps.
- Minimum Number of Features per 2005-B16: None.
- Maximum Number of Features per 2005-B16: One.
- Prerequisites: #7450 or #7451
- Corequisites: None.
- Compatibility Conflicts: Can not co-exist with feature #7555.
- Customer Setup: Yes.
- Limitations: None.
- Field Installable: Yes, MES only.
- Cable Order: None.
None.
Back to top
Accessories
|
None.
Customer Replacement Parts
None.
Back to top
Machine Elements
|
Not available.
Back to top
Supplies
|
None.
Diskettes
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
© IBM Corporation 2005.
Back to top
|
|
|
|
|
|
|
|